内蒙锡林浩特鸽子山火山地质研究

鸽子山火山位于内蒙古自治区锡林浩特市东南,处于大兴安岭-大同新生代火山喷发带中段,是锡林浩特-阿巴嘎火山群中保存最为完好的一座玄武质火山。火山喷发物的分布面积约55km²,主要为降落火山渣、溅落熔结火山碎屑岩和熔岩流,成分主要为碧玄岩,晚期有少量的橄榄拉斑玄武岩,碧玄岩中含有较多二辉橄榄岩包体和辉石及歪长石巨晶。火山由锥体、熔岩流和火山碎屑席组成,锥体由早期的降落锥和晚期溅落锥复合而成。火山口经历多次塌陷而成为破火口。锥体西侧及北东侧出露两个仍保留了原始形态的熔岩溢出口,熔岩流类型为结壳熔岩,由多个岩流单元组成,局部地区的熔岩流中发育较多保存完好的喷气锥、喷气碟或喷气塔。火山碎屑席主要分布在锥体的东侧,厚度由锥体向外逐渐减薄。火山活动可分为早、晚两个阶段,早期为爆破式喷发,形成火山渣锥和碎屑席,属亚布里尼型喷发,晚期主要为溢流式喷发,形成溅落锥和大规模熔岩流,其活动时代为晚更新世末-全新世。     

松辽盆地徐家围子断陷营城组火山岩相和火山机构分析

徐家围子断陷营城组火山岩极为发育。文章通过对火山岩的岩芯观察、薄片鉴定、岩芯测试及测井资料、二维、三维地震资料的综合分析 ,将营城组火山岩盆地分为 3大相区 ,即火山喷发区、过渡区和沉积区。火山喷发区岩性由各种熔岩、火山碎屑岩和少量砂砾岩组成 ;过渡区岩性以火山碎屑岩与沉积岩互层为特征 ,夹少量火山熔岩 ;沉积区岩性包括砂砾岩、砂岩、粉砂岩和泥岩。火山喷发区内可识别出 8种类型的火山岩相 (空落相、溢流相、基底涌流相、火山碎屑流相、火山泥石流相、火山沉积相、次火山相、隐爆角砾岩相 )和 3种类型的火山机构 (层火山、微型盾火山和渣锥火山 )。不同类型的火山机构具有不同火山作用、岩相分布特征和含油气性。因此火山岩相及火山机构分析对火山作用研究和油气勘探均有重要意义。     

Note on the evolution of a Miocene composite volcano in an extensional setting, Zârand Basin (Apuseni Mts., Romania)

Bontâu is a major eroded composite volcano filling the Miocene Zârand extensional basin, near the junction between the Codru-Moma and Highi?-Drocea Mountains, at the tectonic boundary between the South and North Apuseni Mountains. It is a quasi-symmetric structure (16–18 km in diameter) centered on an eroded vent area (9×4 km), buttressed to the south against Mesozoic ophiolites and sedimentary deposits of the South Apuseni Mountains. The volcano was built up in two sub-aerial phases (14–12.5 Ma and 11–10 Ma) from successive eruptions of andesite lava and pyroclastic rocks with a time-increasing volatile budget. The initial phase was dominated by emplacement of pyroxene andesite and resulted in scattered individual volcanic lava domes associated marginally with lava flows and/or pyroclastic block-and-ash flows. The second phase is characterized by amphibole-pyroxene andesite as a succession of pyroclastic eruptions (varying from strombolian to subplinian type) and extrusion of volcanic domes that resulted in the formation of a central vent area. Numerous debris flow deposits accumulated at the periphery of primary pyroclastic deposits. Several intrusive andesitic-dioritic bodies and associated hydrothermal and mineralization processes are known in the volcano vent complex area. Distal epiclastic deposits initially as gravity mass flows and then as alluvial volcaniclastic and terrestrial detritic and coal filled the basin around the volcano in its western and eastern part. Chemical analyses show that lavas are calc-alkaline andesites with SiO₂ ranging from 56–61%. The petrographical differences between the two stages are an increase in amphibole content at the expense of two pyroxenes (augite and hypersthene) in the second stage of eruption; CaO and MgO contents decrease with increasing SiO₂. In spite of a ～4 Ma evolution, the compositions of calc-alkaline lavas suggest similar fractionation processes. The extensional setting favored two pulses of short-lived magma chamber processes.     

塔里木溢流玄武岩的喷发特征

通过对柯坪地区二叠系野外火山岩露头剖面和英买力、哈拉哈塘井区二叠系火山岩钻井剖面的对比,将塔里木早二叠世溢流玄武岩划分为三个旋回,从老到新依次是:库普库兹满溢流玄武岩旋回(KP),长英质火山碎屑岩旋回(FP)和开派兹雷克溢流玄武岩旋回(KZ)。KP旋回以巨厚溢流玄武岩夹凝灰岩为特征,在柯坪露头区和英买力井区均可划分出三层巨厚玄武质熔岩流,至哈拉哈塘井区减少为一层玄武岩流,但长英质火山碎屑岩和熔岩厚度增加。FP旋回在柯坪露头区自下而上包括空落相凝灰岩,熔结凝灰岩,再沉积火山碎屑岩和正常碎屑岩夹火山灰层,该层可与英买力及哈拉哈塘井区的凝灰岩层对比,表明在塔北存在一期面积广泛的长英质火山喷发。KZ旋回以溢流玄武岩为主,在开派兹雷克剖面识别出四期喷发共8层溢流玄武岩和一期安山质玄武岩,每期喷发之间夹少量碎屑岩,但未见长英质火山碎屑岩夹层,该特征与英买力和哈拉哈塘井区的火山层序组合不同,而与塔中溢流玄武岩类似。三个火山旋回的划分表明塔里木大火成岩省经历了"基性溢流玄武岩-酸性火山碎屑岩-基性溢流玄武岩"的演变过程,与Afro-Arabian溢流玄武岩省相似,可进行对比研究。     

火山碎屑岩的百年研究

火山碎屑岩是爆破性火山喷发行为的直接产物,不同的碎屑成分、粒度及结构反映了不同岩相的堆积动力学过程,对火山碎屑岩岩石学和岩相组合的研究发展成了以物理火山学为代表的现代火山学研究体系。作为火山爆发碎屑物质的集合,其中不同成因类型的火山碎屑物往往可以直接对应不同阶段火山作用动力学参数特征。火山碎屑物3个最基本的堆积物成因类型是火山碎屑降落物、火山碎屑流和火山碎屑涌浪。火山喷发时碎屑化过程主要涉及挥发分的出溶和岩浆碎屑化过程以及不同火山流体内部的碎屑化过程。对于岩浆喷发、射汽岩浆喷发以及射汽喷发的直接产物,火山碎屑岩在组成上都包含了岩浆破碎的同源碎屑、火山通道裹进的异源碎屑以及火山流体在地表流动时捕获的表生碎屑。火山碎屑定义为爆破性火山喷发的直接行为产物,而包括坡移、滑坡体、火山泥石流等火山降解过程的表生碎屑与熔岩流在自生、淬碎碎屑化过程产生的碎屑则被定义为火山质碎屑。火山岩岩相的建立,为20世纪80年代后期向火山学研究阶段的转变奠定了基础。在地质研究的基础上探索火山活动过程和控制机制的经验模型、实验模拟和数值模拟研究,其中流体动力学的介入对理解火山喷发的基本过程具有里程碑式的推动意义。由此形成的火山学是研究火山与火山喷发的形成机理、喷发过程和产物特性的科学。     

火山碎屑岩的百年研究

火山碎屑岩是爆破性火山喷发行为的直接产物,不同的碎屑成分、粒度及结构反映了不同岩相的堆积动力学过程,对火山碎屑岩岩石学和岩相组合的研究发展成了以物理火山学为代表的现代火山学研究体系。作为火山爆发碎屑物质的集合,其中不同成因类型的火山碎屑物往往可以直接对应不同阶段火山作用动力学参数特征。火山碎屑物3个最基本的堆积物成因类型是火山碎屑降落物、火山碎屑流和火山碎屑涌浪。火山喷发时碎屑化过程主要涉及挥发分的出溶和岩浆碎屑化过程以及不同火山流体内部的碎屑化过程。对于岩浆喷发、射汽岩浆喷发以及射汽喷发的直接产物,火山碎屑岩在组成上都包含了岩浆破碎的同源碎屑、火山通道裹进的异源碎屑以及火山流体在地表流动时捕获的表生碎屑。火山碎屑定义为爆破性火山喷发的直接行为产物,而包括坡移、滑坡体、火山泥石流等火山降解过程的表生碎屑与熔岩流在自生、淬碎碎屑化过程产生的碎屑则被定义为火山质碎屑。火山岩岩相的建立,为20世纪80年代后期向火山学研究阶段的转变奠定了基础。在地质研究的基础上探索火山活动过程和控制机制的经验模型、实验模拟和数值模拟研究,其中流体动力学的介入对理解火山喷发的基本过程具有里程碑式的推动意义。由此形成的火山学是研究火山与火山喷发的形成机理、喷发过程和产物特性的科学。     

北京地区岩浆岩和火山碎屑岩的特征及其对窑坡煤系的影响

详细研究了北京地区与窑坡组有关的岩浆岩和火山碎屑岩的岩性和分布特征以及对窑坡煤系的影响。认为窑坡组形成前的火山喷发,为煤系的形成提供了基底,并引起抢峰坡和葫芦棚等地隆起;窑坡组形成过程中的火山喷发,喷出的火山物质使湖泊淤浅,在淤浅处发育泥炭沼泽而成煤;窑坡组形成后的岩浆侵入使窑坡煤系受到了破坏。      

Using scoria cones,lava lakes and tephra islands to understand the evolution of basaltic fissure eruptions

Basaltic fissure eruptions are the most common eruption type on Earth. They are characterised by linear lava fountains that construct pyroclastic cones and expansive lava flow fields. The histories of these eruptions can be notoriously difficult to interpret due to the geochemical homogeneity of the tephra, and due to the fact that many of the early deposits become buried during later stages of the eruption. Furthermore, observing the construction of the pyroclastic cones is inherently difficult and dangerous due to the presence of active lava fountains. However, glacial outbursts in the north of Iceland have dissected the products of a Holocene fissure eruption. Examination of the pyroclastic cones, tephra deposits and a solidified lava lake along the fissure has allowed us to elucidate the complex eruptive processes that occur during these eruptions.     

松辽盆地营城组火山岩冷却单元及地层结构分析

火山岩冷却单元的识别是火山岩地层和岩相研究的重要环节。松辽盆地东南缘露头区和徐家围子断陷营城组火山岩剖面的剖析显示,冷却单元主要存在4种主要的单元类型:碎屑岩型、熔岩型、碎屑岩+熔岩型和熔岩+碎屑岩型。碎屑岩型和熔岩型是端元类型,分别反映蒸汽喷发和岩浆喷发的作用过程;碎屑岩+熔岩型是基本组合单元类型,反映蒸汽-岩浆喷发的连续作用过程;熔岩+碎屑岩型属于改造的或特殊机制的类型。冷却单元本身及其堆叠具有相的意义,是火山岩地层的基本成因地层单元,因此成为解释火山岩地层结构、了解形成与保存过程的重要基础。通过火山岩冷却单元识别与叠置分析,构建了松辽盆地徐家围子断陷营城组一段的地层结构。     

Extracting the damaging effects of the 2010 eruption of Merapi volcano in Central Java, Indonesia

This research focuses on providing information related to the damaging effects of the 2010 eruption of Merapi volcano in Central Java, Indonesia. This information will be used to help emergency responders to assess losses more timely and efficiently, and to monitor the progress in emergency response and recovery. The objectives of this research are: (a) to generate a map of pyroclastic deposits based on activities pre- and post-volcano eruption of 2010 in the research area, (b) to investigate the impact of volcano eruption on the environment, and (c) to assess the impact of volcano eruption on landuse. ALOS PALSAR remote sensing data pre- and post-disaster were used in this research for mapping the volcano eruption. Topographic and geomorphological maps were analyzed for profiling and field orientation, which were used to investigate the impact of volcano eruption on the environment. SPOT 4 satellite images were used in this research for updating landuse information from the topographic map. The result of the landuse updated data was used for assessment of the volcano eruption’s impact on landuse with the GIS raster environment. The volcanic eruption that occurred in 2010 is estimated to have an impact of 133.31 ha for settlements, 92.32 ha for paddy fields, 235.60 ha for dry farming, 570.98 ha for plantations, 380.86 ha for bare land, and 0.12 ha for forest areas. An estimate of the number of buildings damaged due to the volcano eruption in 2010 was carried out by overlaying a map of pyroclastic deposits and the information point of the building sites from the topographic map. The total number of buildings damaged is estimated to be around 12,276 units.     

Tephrochronological study in the quaternary Val d’Agri intermontane basin (Southern Apennines,Italy)

In the south-eastern depocentre of the Val d’Agri basin (Southern Apennines), a volcanic ash layer crops out interbedded within poorly structured alluvial fan deposits of Late Pleistocene age. Textural, depositional and pedological features of this weathered layer suggest a primary deposition from a pyroclastic fall-out of volcanic ash. Chemical analyses of feldspars show an alkali trachytic composition and accessory minerals association allow to correlate this tephra layer with the regionally dispersed Y-7 marine tephra layer (Tufo Verde Epomeo eruption, Ischia volcano), dated at 56 ± 4 ka. The Val d’Agri tephra here described for the first time was deposited during MIS Stage 3. Its recovery and characterization permit to contribute to regional correlation of the Mediterranean climatic and volcanic events from marine to continental successions and to describe landscape evolution of the Southern Apennines during glacial–interglacial cycles.     

长白山火山灾害及其对大型工程建设的影响

长白山火山是世界著名的活火山,历史时期有过多次喷发,有再次爆发的危险.长白山火山最大的一次爆发发生在公元1199-1200年,这次大爆发的火山灰最远到达距其1 000km远的日本北部.依据这次大爆发由火山喷发空中降落堆积物、火山碎屑流和火山泥流造成的巨大火山灾害,预测了长白山火山未来爆发火山灾害的类型、强度和范围,并编制了长白山火山未来爆发火山喷发空中降落堆积物灾害预测图、火山碎屑流灾害预测图和火山泥流灾害预测图.该研究可预防和减轻火山灾害,指导核电站等大型工程选址.     

辽西中生代义县旋回强烈火山作用对生物生存环境的双重影响

辽西中生代义县旋回火山作用可以划分成4个亚旋回,每个亚旋回火山喷发都有不等量的火山碎屑物和熔岩形成。火山爆发作用对生物生存环境产生两方面的影响,一方面火山喷发作用形成一定量的H2O、SO2、SO3等硫化物气体,是火山喷发烟雾及火山硫酸盐气溶胶的主要物质成分,由于硫化物气体上升进入大气层而发生氧化反应,形成硫酸盐气溶胶,对太阳产生折射,使生物死亡。H2S、SO2、SO3、HCl和FIF等气体和As、Hg的存在都能造成水体和植物的污染,使生物死亡。另一方面火山作用间歇期为生物提供生存的时间和活动的空间。火山作用停止以后,火山口附近通常形成大量的温泉和较大的湖泊,给生物提供了良好的生存环境,使生物在新的环境下重新繁盛。     

Explosive rhyolite tuya formation: classic examples from Kerlingarfjöll,Iceland

Rhyolite eruptions in Iceland mostly take place at long-lived central volcanoes, examples of which are found associated with each of the present-day rift-zone ice caps. Subglacial eruptions at Kerlingarfjöll central volcano produced rhyolite tuyas that are notable for their exposures of early-erupted pyroclastic material. Observations from a number of these edifices are synthesised into a general model for explosive rhyolite tuya formation. Eruptions begin with violent phreatomagmatic explosions that generate massive tuff (mT), but the influence of water quickly declines, leading to the formation of massive lapilli-tuffs (mLT) containing magmatically-fragmented vesicular pumice and ash. These are deposited rapidly near the vent, probably by moist pyroclastic density currents, confined by ice but not within a meltwater lake. The explosive-effusive transition is controlled by the ascent rate and gas content of the magma. An unusual obsidian-rich massive lapilli-tuff lithofacies (omLT) is identified and interpreted as pyroclastic material that was intruded into gas-fluidised deposits at the explosive-effusive transition. The effusive phase of eruption involves the emplacement of intrusions and lava caps. Intrusions of lava into the early-erupted phreatomagmatic deposits are characterised by peperitic margins and the formation of hyaloclastite. Intrusions into stratigraphically higher levels of the pyroclastic material show more limited interaction with the host tephra and have microcrystalline cores. Large lava bodies with columnar-jointed margins cap the tuyas and have intrusive basal contacts with the tephras. The main influence of the ice is to confine the rhyolite eruptive products to immediately above the vent region. This is in contrast to subglacial basaltic tuya-forming eruptions, which are characterised by the formation of meltwater lakes, phreatomagmatic fragmentation and subaqueous deposition. The lack of meltwater storage may reduce the potential for large jökulhlaups.     

From seamount to oceanic island, Porto Santo, central East-Atlantic

The uplifted and deeply eroded volcanic succession of Porto Santo (central East-Atlantic) is the product of a wide spectrum of dynamic processes that are active in shoaling to emergent seamounts. Two superimposed lapilli cones marking the base of the exposed section are interpreted as having formed from numerous submarine to subaerial phreatomagmatic explosions, pyroclastic fragmentation being subordinate. The lower basaltic and the upper mugearitic to trachytic sections are dominated by redeposited tephra and are called 'lapilli cone aprons'. Vertical growth due to accumulation of tephra, voluminous intrusions, and minor pillowed lava flows produced ephemeral islands which were subsequently leveled by wave erosion, as shown by conglomerate beds. Periods of volcanic quiescence are represented by abundant biocalcarenite lenses at several stratigraphic levels. The loose tephra piles became stabilized by widespread syn-volcanic intrusions such as dikes and trachytic to rhyolitic domes welding the volcanic and volcaniclastic ensemble into a solid edifice. Shattering of a submarine extrusive trachytic dome by pyroclastic and phreatomagmatic explosions, accentuated by quench fragmentation, resulted in pumice- and crystal-rich deposits emplaced in a prominent submarine erosional channel. The dome must have produced an island as indicated by a collapse breccia comprising surf-rounded boulders of dome material. Subaerial explosive activity is represented by scoria cones and tuff cones. Basaltic lava flows built a resistant cap that protected the island from wave erosion. Some lava flows entered the sea and formed two distinct types of lava delta: 1. closely-packed pillow lava and massive tabular lava flows along the southwestern coast of Porto Santo, and 2. a steeply inclined pillow-hyaloclastite breccia prism composed of foreset-bedded hydroclastic breccia, variably-shaped pillows, and thin sheet flows capped by subhorizontal submarine to subaerial lava flows along the eastern coast of Porto Santo.The facies architectures indicate emplacement: 1. on a gently sloping platform in southwestern Porto Santo, and 2. on steep offshore slopes along high energy shorelines in eastern Porto Santo.Growth of the pillow-hyaloclastite breccia prism is dominated by the formation of foreset beds but various types of syn-volcanic intrusions contributed significantly. Submarine flank eruptions occurred in very shallow water on the flanks of the hyaloclastite prism in eastern Porto Santo. The island became consolidated by intrusion of numerous dikes and by emplacement of prominent intrusions that penetrate the entire volcanic succession. Volcanic sedimentation ended with the emplacement of a debris avalanche that postdates the last subaerial volcanic activity.     

Anatomy of a submarine pyroclastic flow and associated turbidity current: July 2003 dome collapse, Soufrière Hills volcano, Montserrat, West Indies

The 12 to 13 July 2003 andesite lava dome collapse at the Soufrière Hills volcano, Montserrat, provides the first opportunity to document comprehensively both the sub‐aerial and submarine sequence of events for an eruption. Numerous pyroclastic flows entered the ocean during the collapse, depositing approximately 90% of the total material into the submarine environment. During peak collapse conditions, as the main flow penetrated the air–ocean interface, phreatic explosions were observed and a surge cloud decoupled from the main flow body to travel 2 to 3 km over the ocean surface before settling. The bulk of the flow was submerged and rapidly mixed with sea water forming a water‐saturated mass flow. Efficient sorting and physical differentiation occurred within the flow before initial deposition at 500 m water depth. The coarsest components (～60% of the total volume) were deposited proximally from a dense granular flow, while the finer components (～40%) were efficiently elutriated into the overlying part of the flow, which evolved into a far‐reaching turbidity current.     

Merapi (Java,Indonesia): anatomy of a killer volcano

Merapi is Indonesia's most dangerous volcano with a history of deadly eruptions. Over the past two centuries, the volcanic activity has been dominated by prolonged periods of lava dome growth and intermittent gravitational or explosive dome failures to produce pyroclastic flows every few years. Explosive eruptions, such as in 2010, have occurred occasionally during this period, but were more common in pre‐historical time, during which a collapse of the western sector of the volcano occurred at least once. Variations in magma supply from depth, magma ascent rates and the degassing behaviour during ascent are thought to be important factors that control whether Merapi erupts effusively or explosively. A combination of sub‐surface processes operating at relatively shallow depth inside the volcano, including complex conduit processes and the release of carbon dioxide into the magmatic system through assimilation of carbonate crustal rocks, may result in unpredictable explosive behaviour during periods of dome growth. Pyroclastic flows generated by gravitational or explosive lava dome collapses and subsequent lahars remain the most likely immediate hazards near the volcano, although the possibility of more violent eruptions that affect areas farther away from the volcano cannot be fully discounted. In order to improve hazard assessment during future volcanic crises at Merapi, we consider it crucial to improve our understanding of the processes operating in the volcano's plumbing system and their surface manifestations, to generate accurate hazard zonation maps that make use of numerical mass flow models on a realistic digital terrain model, and to utilize probabilistic information on eruption recurrence and inundation areas.     

松辽盆地改造残留的古火山机构与现代火山机构的类比分析

现代火山机构形态有盾状、锥状和穹状,可按喷发样式进一步划分为7种类型。据此分类,在松辽盆地周缘剖面及其北部徐家围子断陷区可识别出4类火山机构：盾状火山机构,由喷溢相熔岩组成,可夹有薄层爆发相火山碎屑岩;层火山机构,由互层的熔岩与火山碎屑岩组成,喷溢相与爆发相交替的序列明显;火山碎屑锥,几乎全部由火山碎屑（熔）岩组成,爆发相为主;熔岩穹丘由高粘度的流纹质、英安质熔岩堵塞火山口后缓慢挤出形成,喷溢相和侵出相发育,兼有火山通道相。盆地内埋藏火山机构最小坡度为3°,最大坡度为25°,底部直径为2～14 km,分布面积为4～50 km²,火山岩厚度为100～600 m;总体上呈现出数目多、个体规模小、受区域大断裂控制、具裂隙式-多中心喷发、彼此相互叠置的特征。火山岩岩性和岩相是控制松辽盆地古火山机构类型及形态的主要因素。     

Sedimentation and welding processes of dilute pyroclastic density currents and fallout during a large-scale silicic eruption, Kikai caldera, Japan

Sedimentation and welding processes of the high temperature dilute pyroclastic density currents and fallout erupted at 7.3 ka from the Kikai caldera are discussed based on the stratigraphy, texture, lithofacies characteristics, and components of the resulting deposits. The welded eruptive deposits, Unit B, were produced during the column collapse phase, following a large plinian eruption and preceding an ignimbrite eruption, and can be divided into two subunits, Units B_l and B_u. Unit B_l is primarily deposited in topographic depressions on proximal islands, and consists of multiple thin (< 1 m) flow units with stratified and cross-stratified facies with various degrees of welding. Each thin unit appears as a single aggradational unit, composed of a lower lithic-rich layer or pod and an upper welded pumice-rich layer. Lithic-rich parts are fines-depleted and are composed of altered country rock, fresh andesite lava, obsidian clasts with chilled margins, and boulders. The overlying Unit B_u shows densely welded stratified facies, composed of alternating lithic-rich and pumice-rich layers. The layers mantle lower units and are sometimes viscously deformed by ballistics. The sedimentary characteristics of Unit B_l such as welded stratified or cross-stratified facies indicate that high temperature dilute pyroclastic density currents were repeatedly generated from limited magma-water interactions. It is thought that dense brittle particles were segregated in a turbulent current and were immediately buried by deposition of hot, lighter pumice-rich particles, and that this process repeated many times. It is also suggested that the depositional temperature of eruptive materials was high and the eruptive style changed from a normal plinian eruption, through surge-generating explosions (Unit B_l), into an agglutinate-dominated fallout eruption (Unit B_u). On the basis of field data, welded pyroclastic surge deposits could be produced only under specific conditions, such as (1) rapid accumulation of pyroclastic particles sufficiently hot to weld instantaneously upon deposition, and (2) elastic particles' interactions with substrate deformation. These physical conditions may be achieved within high temperature and highly energetic pyroclastic density currents produced by large-scale explosive eruptions.     

长白山天池火山近代喷发中气象站组熔岩—碎屑岩流研究

中晚全新世以来,长白山天池火山的活动多为爆炸性喷发和形成火山碎屑流,熔岩流出较少,气象站组熔岩—碎屑岩流则是为数不多的熔岩溢流活动之一,它是天池火山一个寄生火山的喷发产物。气象站组熔岩—碎屑岩流的岩性为碱流岩质,岩浆粘度大,流动缓慢。据研究其喷发时间大约4 ka BP,应属天池火山的近代喷发产物。