Comparison of the Upper Mantle Shear Wave Velocity Structure of the Indian Shield and the Tibetan Plateau and Tectonic Implications

Summary. Travel times and waveforms of long-period SH -waves recorded at distances of 10–30° and some SS waveforms are used to constrain the upper mantle velocities down to a depth of 400km beneath both the Indian Shield and the Tibetan Plateau. the shear velocity in the uppermost mantle beneath both the Indian Shield and the Tibetan Plateau is high and close to 4.7 km s⁻¹. the Indian Shield has a fairly thick high velocity lid, and the mean velocity between 40 and 250 km is between 4.58 and 4.68 km s⁻¹. In contrast, S -wave travel times and waveforms of S -waves, as well as a few for SS , show that the mean velocity between 70 and 250km beneath the central and northern part of the Tibetan Plateau is slower by 4 per cent or more than that beneath the Indian Shield and probably is between 4.4 and 4.5km s⁻¹. No large differences in the structure of the two areas below 250 km are required to explain both the arrival times and the waveforms of SH phases crossing Tibet or the Indian Shield. These results show that the structure of Tibet is not that of a shield and imply that the Indian plate is not underthrusting the whole of the Tibetan Plateau at the present time.     

The shear-wave velocity structure in the upper mantle beneath Eurasia

We develop an approach that allows us to invert for the mantle velocity structure within a finely parametrized region as a perturbation with respect to a low-resolution, global tomographic model. We implement this technique to investigate the upper-mantle structure beneath Eurasia and present a new model of shear wave velocity, parametrized laterally using spherical splines with ∼2.9° spacing in Eurasia and ∼11.5° spacing elsewhere. The model is obtained from a combined data set of surface wave phase velocities, long-period waveforms and body-wave traveltimes. We identify many features as narrow as few hundred kilometres in diameter, such as subducting slabs in eastern Eurasia and slow-velocity anomalies beneath tectonically active regions. In contrast to regional studies in which these features have been identified, our model encompasses the structure of the entire Eurasian continent. Furthermore, including mantle- and body-wave waveforms helped us constrain structures at depths larger than 250 km, which are poorly resolved in earlier models. We find that up to +9 per cent faster-than-average anomalies within the uppermost ∼200 km of the mantle beneath cratons and some orogenic regions are separated by a sharp gradient zone from deeper, +1 to +2 per cent anomalies. We speculate that this gradient zone may represent a boundary separating the lithosphere from the continental root, which might be compositionally distinct from the overlying lithosphere and remain stable either due to its compositional buoyancy or due to higher viscosity compared with the suboceanic mantle. Our regional model of anisotropy is not significantly different from the global one.     

On the origin of the seismic anisotropy of the lithosphere

Summary. It is known that flow in the mantle can produce preferred orientation in olivine crystals with seismic anisotropy as a consequence. Flow in the subcrustal lithosphere is unlikely because of the high viscosity. Lenses of high temperature and low-viscosity ( anomalous mantle ) are located under the crust in many tectonically active regions, and viscous flow can easily arise in such material resulting in seismic anisotropy. After cooling, such anomalous mantle acquires high viscosity and becomes incorporated into the lithospheric layer preserving the anisotropy produced by the flows which existed previously. The interaction of the stresses with cracks in the upper crust can be one of the causes of anisotropy in this layer.     

Seismic P-wave anisotropy in the subcrustal lithosphere of north-west Australia

Summary. Reduced P_n travel times from the Archaean Pilbara Craton of north-west Australia show a strong correlation with azimuth, which could be used as evidence of anisotropy. However, the azimuthal correlation could also be explained by a southerly dip of between 1 and 2° on the crust–mantle boundary, although the models from several reversed seismic profiles across the craton suggest a smaller dip.
A time-term analysis of the P_n date yielded several models. The preferred solution, in which the dip on the crust–mantle boundary is similar to that in the models from the reversed profiles, has approximately 2 per cent anisotropy in the uppermost mantle, with the direction of maximum velocity 30° east of north. One possible cause of the anisotropy is that olivine crystals were aligned by syntectonic recrystallization and/or power law creep in the tensional environment caused at the base of the lithosphere by flexure during loading of the lithosphere by the strata of the Hamersley Basin which overlies the Pilbara Craton.
A seismic discontinuity occurs about 15 km below the crust–mantle boundary under the craton. A qualitative analysis of all available seismic data suggests that the velocity below the boundary is probably also anisotropic, with the direction of maximum velocity between north and 40° west of north. The direction of minimum velocity below the sub-Moho boundary correlates loosely with the direction of basement lineaments in the Proterozoic Capricorn Orogenic Belt to the south of the craton, suggesting that the anisotropy under the boundary may be younger than that immediately under the crust/mantle boundary. This is consistent with the notion that the Archaean lithosphere was thinner than the present lithosphere.     

Pn anisotropy studies in northern Britain and the eastern and western United States

Summary. Available seismic refraction data from three different continental areas, northern Britain and the eastern and western United States, has been studied for possible P_n , velocity anisotropy using the methods described by Bamford. There are various deficiencies in the time—distance data used in each case but, while the uppermost mantle beneath northern Britain and the eastern United States seems to be isotropic within the limits of measurement error, there is a small but significant anisotropy beneath the western United States.
Both the amount (up to 3 per cent) and the direction (70–80° east of north) of this anisotropy are very similar to the results obtained in the Pacific Ocean off California. We tentatively conclude that this anisotropy is present as a consequence of the subduction of oceanic lithosphere beneath the western United States.     

Mechanism of formation of fold belts and associated seismic anisotropy

Summary. Fold belts form due to shortening of deep basins on oceaic and continental crust. Basins on the oceanic crust should be characterized by a pronounced seismic anisotropy in the mantle lithosphere. Deep basins on the continental crust may develop from the stretching or the destruction of the lower crust under asthenospheric upwelling. These processes can produce seismic anisotropy in both the crust and mantle lithosphere. The character of the anisotropy is different for different basin forming processes. Considerable anisotropy should also arise from compression of the crust and mantle in fold belts. The formation of fold belts produces the original seismic anisotropy in continental lithosphere.     

The Canary Islands swell: a coherence analysis of bathymetry and gravity

The Canary Archipelago is an intraplate volcanic chain, located near the West African continental margin, emplaced on old oceanic lithosphere of Jurassic age, with an extended volcanic activity since Middle Miocene. The adjacent seafloor does not show the broad oceanic swell usually observed in hotspot-generated oceanic islands. However, the observation of a noticeable depth anomaly in the basement west of the Canaries might indicate that the swell is masked by a thick sedimentary cover and the influence of the Canarian volcanism. We use a spectral approach, based on coherence analysis, to determine the swell and its compensation mechanism. The coherence between gravity and topography indicates that the swell is caused by a subsurface load correlated with the surface volcanic load. The residual gravity/geoid anomaly indicates that the subsurface load extends 600 km SSW and 800 km N and NNE of the islands. We used computed depth anomalies from available deep seismic profiles to constrain the extent and amplitude of the basement uplift caused by a relatively low-density anomaly within the lithospheric mantle, and coherence analysis to constrain the elastic thickness of the lithosphere ( T_e ) and the compensation depth of the swell. Depth anomalies and coherence are well simulated with T_e =28–36 km, compensation depth of 40–65 km, and a negative density contrast within the lithosphere of ∼33 kg m⁻³. The density contrast corresponds to a temperature increment of ∼325°C, which we interpret to be partially maintained by a low-viscosity convective layer in the lowermost lithosphere, and which probably involves the shallower parts of the asthenosphere. This interpretation does not require a significant rejuvenation of the mechanical properties of the lithosphere.     

Small-scale mantle flows and induced lithospheric stress near island arcs

Summary. This paper explores the middle ground between complex thermally-coupled viscous flow models and simple corner flow models of island arc environments. The calculation retains the density-driven nature of convection and relaxes the geometrical constraints of corner flow, yet still provides semianalytical solutions for velocity and stress. A novel aspect of the procedure is its allowance for a coupled elastic lithosphere on top of a Newtonian viscous mantle. Initially, simple box-like density drivers illustrate how vertical and horizontal forces are transmitted through the mantle and how the lithosphere responds by trench formation. The flexural strength of the lithosphere spatially broadens the surface topography and gravity anomalies relative to the functional form of the vertical flow stresses applied to the plate base. I find that drivers in the form of inclined subducting slabs cannot induce self-driven parallel flow; however, the necessary flow can be provided by supplying a basal drag of 1–5 MPa to the mantle from the oceanic lithosphere. These basal drag forces create regional lithospheric stress and they should be quantifiable through seismic observations of the neutral surface. The existence of a shallow elevated phase transition is suggested in two slab models of 300 km length where a maximum excess density of 0.2 g cm⁻³ was needed to generate an acceptable mantle flow. A North New Hebrides subduction model which satisfies flow requirements and reproduces general features of topography and gravity contains a high shear stress zone (75 MPa) around the upper slab surface to a depth of 150 km and a deviatoric tensional stress in the back arc to a depth of 70 km. The lithospheric stress state of this model suggests that slab detachment is possible through whole plate fracture.     

Anisotropy in the oceanic lithosphere of the North-western Pacific Basin

Summary. A series of long-range explosion seismological experiments has been conducted by the use of specially designed ocean bottom seismographs (OBSs) in the Western Pacific. OBS studies of apparent velocity measurements by the use of natural earthquakes have also been made. The experiments have made clear that large-scale P -wave anisotropy exists in the entire thickness of the oceanic lithosphere. The existence of the large-scale anisotropy in the oceanic lithosphere has been demonstrated for the first time by seismic body-wave studies. Previously, anisotropy had been found only in the uppermost oceanic mantle in the Eastern Pacific.
The azimuth of the maximum velocity, 8.6 km s^-1, is about 155° clock-wise from north. The direction is perpendicular to the magnetic lineation of the region, however, the direction differs from the direction of the present plate motion by about 30°. So it appears that the anisotropy has been 'frozen' at least since the change of the plate motion that occurred 40 Myr ago. The frozen anisotropy should set important constraints on the mechanical properties of the lithosphere such as the viscosity and temperature of the lower lithosphere.     

Analysis of gravity fields in the northwestern Himalayas and Kohistan region using deep seismic sounding data

A Bouguer gravity anomaly map of the NW Himalayas and parts of the Kohistan/Hindukush region has been prepared using all available gravity data. Analysis of the gravity field has been carried out along a profile extending from Gujranwala (located near the edge of the Indian shield) to the Haramosh massif in a NNE–SSW direction. The gravity profile is located close to the DSS profile shot under the USSR–India scientific collaborative programme. Velocity information available along different parts of the profile has been used to infer values of crustal and upper mantle density.
The observed gravity field (Bouguer) has been interpreted in terms of Moho depth and density contrast between the crust and the mantle. The Moho depth is interpreted as increasing from nearly 35 km near the edge of the Indian shield to 75 km (below sea-level) underneath the Haramosh massif. A similar model is applicable to a profile passing to the west of Nanga Parbat massif, from Gujranwala to Ghizar, through the Kohistan region. However, along this profile high-density lower-crustal rocks appear to have been emplaced in the upper part along the main mantle thrust. The nature of isostatic compensation prevailing underneath the Himalayas has been discussed, as has the theory of lithospheric flexure proposed by Karner & Watts and Lyon-Caen & Molnar. It is felt that although these ideas explain the broad features of the Moho configuration as observed in the NW Himalayas, there are significant departures. The role of tectonic forces in shaping the Moho and causing changes in the density of the crust cannot be denied.     

Insights into the lithospheric structure and tectonic setting of the Barents Sea region from isostatic considerations

We study the tectonic setting and lithospheric structure of the greater Barents Sea region by investigating its isostatic state and its gravity field. 3-D forward density modelling utilizing available information from seismic data and boreholes shows an apparent shift between the level of observed and modelled gravity anomalies. This difference cannot be solely explained by changes in crustal density. Furthermore, isostatic calculations show that the present crustal thickness of 35–37 km in the Eastern Barents Sea is greater than required to isostatically balance the deep basins of the area (>19 km). To isostatically compensate the missing masses from the thick crust and deep basins and to adequately explain the gravity field, high-density material (3300–3350 kg m⁻³) in the lithospheric mantle below the Eastern Barents Sea is needed. The distribution of mantle densities shows a regional division between the Western and Eastern Barents and Kara Seas. In addition, a band of high-densities is observed in the lower crust along the transition zone from the Eastern to Western Barents Sea. The distribution of high-density material in the crust and mantle suggests a connection to the Neoproterozoic Timanide orogen and argues against the presence of a Caledonian suture in the Eastern Barents Sea. Furthermore, the results indicate that the basins of the Western Barents Sea are mainly affected by rifting, while the Eastern Barents Sea basins are located on a stable continental platform.     

Upper-mantle flow beneath French Polynesia from shear wave splitting

Upper-mantle flow beneath the South Pacific is investigated by analysing shear wave splitting parameters at eight permanent long-period and broad-band seismic stations and 10 broad-band stations deployed in French Polynesia from 2001 to 2005 in the framework of the Polynesian Lithosphere and Upper Mantle Experiment (PLUME). Despite the small number of events and the rather poor backazimuthal coverage due to the geographical distribution of the natural seismicity, upper-mantle seismic anisotropy has been detected at all stations except at Tahiti where two permanent stations with 15 yr of data show an apparent isotropy. The median value of fast polarization azimuths (N67.5°W) is parallel to the present Pacific absolute plate motion direction in French Polynesia (APM: N67°W). This suggests that the observed SKS fast polarization directions result mainly from olivine crystal preferred orientations produced by deformation in the sublithospheric mantle due to viscous entrainment by the moving Pacific Plate and preserved in the lithosphere as the plate cools. However, analysis of individual measurements highlights variations of splitting parameters with event backazimuth that imply an actual upper-mantle structure more complex than a single anisotropic layer with horizontal fast axis. A forward approach shows that a two-layer structure of anisotropy beneath French Polynesia better explains the splitting observations than a single anisotropic layer. Second-order variations in the measurements may also indicate the presence of small-scale lateral heterogeneities. The influence of plumes or fracture zones within the studied area does not appear to dominate the large-scale anisotropy pattern but may explain these second-order splitting variations across the network.     

Regional three-dimensional gravity modelling of the NE Atlantic margin

A series of three‐dimensional models has been constructed for the structure of the crust and upper mantle over a large region spanning the NE Atlantic passive margin. These incorporate isostatic and flexural principles, together with gravity modelling and integration with seismic interpretations. An initial isostatic model was based on known bathymetric/topographic variations, an estimate of the thickness and density of the sedimentary cover, and upper mantle densities based on thermal modelling. The thickness of the crystalline crust in this model was adjusted to equalise the load at a compensation depth lying below the zone of lateral mantle density variations. Flexural backstripping was used to derive alternative models which tested the effect of varying the strength of the lithosphere during sediment loading. The models were analysed by comparing calculated and observed gravity fields and by calibrating the predicted geometries against independent (primarily seismic) evidence. Further models were generated in which the thickness of the sedimentary layer and the crystalline crust were modified in order to improve the fit to observed gravity anomalies. The potential effects of igneous underplating and variable upper mantle depletion were explored by a series of sensitivity trials. The results provide a new regional lithospheric framework for the margin and a means of setting more detailed, local investigations in their regional context. The flexural modelling suggests lateral variations in the strength of the lithosphere, with much of the margin being relatively weak but areas such as the Porcupine Basin and parts of the Rockall Basin having greater strength. Observed differences between the model Moho and seismic Moho along the continental margin can be interpreted in terms of underplating. A Moho discrepancy to the northwest of Scotland is ascribed to uplift caused by a region of upper mantle with anomalously low density, which may be associated with depletion or with a temperature anomaly.     

Three-dimensional image of the anisotropic bodies beneath central Honshu, Japan

Shear-wave splitting from local deep earthquakes is investigated to clarify the volume and the location of two anisotropic bodies in the mantle wedge beneath central Honshu, Japan. We observe a spatial variation in splitting parameters depending on the combination of sources and receivers, nearly N–S fast in the northern region, nearly E–W fast in the southern region and small time delays in the eastern region. Using forward modelling, two models with 30 and 10 per cent anisotropy are tested by means of a global search for the locations of anisotropic bodies with various volumes. The optimum model is obtained for 30 per cent anisotropy, which means a 5 per cent velocity difference between fast and slow polarized waves. The northern anisotropic body has a volume of 1.00° (longitude) × 0.5° (latitude) × 75 km (depth), with the orientation of the symmetry axis being N20°E. The southern anisotropic body has a volume of 1.25° × 1.25° × 100 km with the symmetry axis along N95°E. Our results show that the anisotropic bodies are located in low-velocity and low- Q regions of the mantle. This, together with petrological data and the location of volcanoes in the arc, suggests that the possible cause of the anisotropy is the preferred alignment of cracks filled with melt.     

Lithospheric thickness beneath the Dabie Shan, central eastern China from S receiver functions

P and S receiver functions obtained from a portable array of 34 broad-band stations in east central China provide a detailed image of the crust–mantle and lithosphere–asthenosphere boundaries (LAB) in the Dabie Shan and its adjacent areas. Clear S -to- P converted waves produced at the LAB show a thin lithosphere beneath the whole study area. Based on our results, the thickest lithosphere of 72 km is observed beneath the southern part of the area within the Yangtze craton, whereas beneath the North-China platform, the lithosphere is only 60 km thick. S receiver functions also reveal, in good agreement with P receiver functions, a maximum depth of the Moho beneath the Dabie Shan orogen at approximately 40 km. Furthermore, we interpret the structural difference at 32° latitude as the probable location of the mantle suture formed between the Yangtze and the Sino-Korean cratons.     

Models of crustal flow in the India–Asia collision zone

Surface velocities in parts of the India–Asia collision zone are compared to velocities calculated from equations describing fluid flow driven by topographically produced pressure gradients. A good agreement is found if the viscosity of the crust is ∼10²⁰ Pa s in southern Tibet and ∼10²² Pa s in the area between the Eastern Syntaxis and the Szechwan Basin. The lower boundary condition of the flow changes between these two areas, with a stress-free lower boundary in the area between the Szechwan basin and the Eastern Syntaxis, and a horizontally rigid but vertically deformable boundary where strong Indian lithospheric material underlies southern Tibet. Deformation maps for olivine, diopside and anorthite show our findings to be consistent with laboratory measurements of the rheology of minerals. Gravitationally driven flow is also suggested to be taking place in the Indo–Burman Ranges, with a viscosity of ∼10¹⁹–10²⁰ Pa s. Flow in both southern Tibet and the Indo–Burman Ranges provides an explanation for the formation of the geometry of the Eastern Himalayan Syntaxis. The majority of the normal faulting earthquakes in the Tibetan Plateau occur in the area of southern Tibet which we model as gravitationally spreading over the Indian shield.     

Seismic anisotropy in the core–mantle transition zone

Split S waves observed at Hockley, Texas from events in the Tonga–Fiji region of the southwest Pacific show predominantly vertically polarized shear-wave ( SV  ) energy arriving earlier than horizontally polarized ( SH ) energy for rays propagating horizontally through D" . After corrections are made for the effects of upper-mantle anisotropy beneath Hockley, a time lag of 1.5 to 2.0  s remains for the furthest events (93.9°–100.6° ), while the time lags of the nearer observations (90.5°–92.9° ) nearly disappear. At closer distances, the S waves from these same events do not penetrate as deeply into the lower mantle, and are not split. These observations suggest that a patch of D" beneath the central Pacific is anisotropic, while the mantle immediately above the patch is isotropic. The thickness of the anisotropic zone appears to be of the order of 100–200  km.
  Observations of shear-wave splitting have previously been made for paths that traverse D" under the Caribbean and under Alaska. SH leads SV , the reverse of the Hockley observations, but in these areas the fact that SV  leads SH in the HKT data shown here suggests a different sort of anisotropy under the central Pacific from that under Alaska and the Caribbean. The case of SH travelling faster than SV  is consistent with transverse isotropy with a vertical axis of symmetry (VTI) and does not require variations with azimuth. The case of SV  leading SH is consistent with transverse isotropy with a horizontal axis of symmetry (HTI), an azimuthally anisotropic medium, and with a VTI medium formed by a hexagonal crystal. Given that (Mg,Fe)SiO₃ perovskite appears unlikely to form anisotropic fabrics on a large scale, the presence of anisotropy may point to chemical heterogeneity in the lowermost mantle, possibly due to mantle–core interactions.     

Upper mantle beneath the Eger Rift (Central Europe): plume or asthenosphere upwelling?

We present the first results of a high-resolution teleseismic traveltime tomography and seismic anisotropy study of the lithosphere–asthenosphere system beneath the western Bohemian Massif. The initial high-resolution tomography down to a depth of 250 km did not image any columnar low-velocity anomaly which could be interpreted as a mantle plume anticipated beneath the Eger Rift, similar to recent findings of small plumes beneath the French Massif Central and the Eifel in Germany. Alternatively, we interpret the broad low-velocity anomaly beneath the Eger Rift by an upwelling of the lithosphere–asthenosphere transition. We also map lateral variations of seismic anisotropy of the mantle lithosphere from spatial variations of P -wave delay times and the shear wave splitting. Three major domains characterised by different orientations of seismic anisotropy correspond to the major tectonic units—Saxothuringian, Moldanubian and the Teplá-Barrandian—and their fabrics fit to those found in our previous studies of mantle anisotropy on large European scales.     

The effects of the spinel—garnet phase transition on the formation of rifted sedimentary basins

We have examined the effects of the spinel-garnet phase transition on subsidence of extensional sedimentary basins. For a constant positive Clapeyron slope ( dP/dT ), the phase boundary moves downwards in the syn-rift and upwards in the post-rift phase. For a non-linear Clapeyron curve ( dP/dT > 0 above 900°C and dP/dT < 0 below 900°C), theory predicts for the reaction of the spinel-garnet phase transition, the direction of phase boundary movement is dependent on the stretching factor, the position of the Clapeyron curve and the lithospheric thickness. A smaller syn-rift and larger post-rift subsidence are predicted for a deeper phase boundary and a thicker lithosphere. The model with a non-linear Clapeyron curve is applied to the subsidence histories of a young extensional basin (Gulf of Lion) and an old continental margin (eastern Canada). The observed syn-rift uplift and the larger post-rift subsidence can be reasonably explained by this model, where the optimum depth of the phase boundary for eastern Canada (˜90 km) is consistent with the estimate from seismic observations and is larger than that for the Gulf of Lion (˜ 50 km). The depth of the spinel-garnet phase boundary is sensitive to the composition of mantle rocks and increases with the extraction of basaltic components from the lithosphere, compatible with our result that the phase boundary is deeper for an older and thicker lithosphere. Thus the surface movement associated with the rifting for these areas may reflect the chemical evolution of the continental lithosphere.     

Seismic anisotropy of the subcrustal lithosphere as evidence for dynamical processes in the upper mantle

Summary. Anisotropy of seismic waves in the uppermost mantle has not only been observed in the oceanic but recently also in the continental lithosphere. Laboratory experiments on the formation of preferred orientation of olivine crystals suggest plastic flow às the most likely mechanism for the genesis of anisotropy in the upper mantle. Since the direction of maximum velocity correlates in the ocean and on the continent with a number of tectonic features, a causal connection between anisotropy and dynamical processes related to plate motions must be suspected.