Location,extent, and magnitude of dynamic topography in the Late Cretaceous Cordilleran Foreland Basin,USA: New insights from 3D flexural backstripping

Mantle-induced dynamic topography (i.e., subsidence and uplift) has been increasingly recognized as an important process in foreland basin development. However, characterizing and distinguishing the effects (i.e., location, extent and magnitude) of dynamic topography in ancient foreland basins remains challenging because the spatio-temporal footprint of dynamic topography and flexural topography (i.e., generated by topographic loading) can overlap. This study employs 3D flexural backstripping of Upper Cretaceous strata in the central part of the North American Cordilleran foreland basin (CFB) to better quantify the effects of dynamic topography. The extensive stratigraphic database and good age control of the CFB permit the regional application of 3D flexural backstripping in this basin for the first time. Dynamic topography started to influence the development of the CFB during the late Turonian to middle Campanian (90.2–80.2 Ma) and became the dominant subsidence mechanism during the middle to late Campanian (80.2–74.6 Ma). The area influenced by >100 m dynamic subsidence is approximately 400 by 500 km, within which significant (>200 m) dynamic subsidence occurs in an irregular-shaped (i.e., lunate) subregion. The maximum magnitude of dynamic subsidence is 300 ± 100 m based on the 80.2–74.6 Ma tectonic subsidence maps. With the maximum magnitude of dynamic uplift being constrained to be 200–300 m, the gross amount of dynamic topography in the Late Cretaceous CFB is 500–600 m. Although the location of dynamic subsidence revealed by tectonic subsidence maps is generally consistent with isopach map trends, tectonic subsidence maps developed through 3D flexural backstripping provide more accurate constraints of the areal extent, magnitude and rate of dynamic topography (as well as flexural topography) in the CFB through the Late Cretaceous. This improved understanding of dynamic topography in the CFB is critical for refining current geodynamic models of foreland basins and understanding the surface expression of mantle processes.     

Refining stratigraphy and tectonic history using detrital zircon maximum depositional age: an example from the Cerro Fortaleza Formation,Austral Basin,southern Patagonia

The north–south trending, Late Cretaceous to modern Magallanes–Austral foreland basin of southernmost Patagonia lacks a unified, radiometric, age‐controlled stratigraphic framework. By simplifying the sedimentary fill of the basin to deep‐marine, shallow‐marine and terrestrial deposits, and combining 13 new U‐Pb detrital zircon maximum depositional ages (DZ MDAs) with published DZ MDAs and U‐Pb ash ages, we provide the first attempt at a unified, longitudinal stratigraphic framework constrained by radiometric age controls. We divide the foreland basin history into two phases, including (1) an initial Late Cretaceous shoaling upward phase and (2) a Cenozoic phase that overlies a Palaeogene unconformity. New DZ samples from the shallow‐marine La Anita Formation, the terrestrial Cerro Fortaleza Formation and several previously unrecognized Cenozoic units provide necessary radiometric age controls for the end of the Late Cretaceous foreland phase and the magnitude of the Palaeogene unconformity in the Austral sector of the basin. These samples show that the La Anita and Cerro Fortaleza Formations have Campanian DZ MDAs, and that overlying Cenozoic strata have Eocene to Miocene DZ MDAs. By filling this data gap, we are able to provide a first attempt at constructing a basinwide, age‐controlled stratigraphic framework for the Magallanes–Austral foreland basin. Results show southward progradation of shallow marine and terrestrial environments from the Santonian through the Maastrichtian, as well as a northward increase in the magnitude of the Palaeogene unconformity. Furthermore, our new age data significantly impact the chronology of fossil flora and dinosaur faunas in Patagonia.     

Causes of spatially variable tectonic subsidence in the Miocene Bermejo Foreland Basin, Argentina

ABSTRACT Tectonic subsidence in the 20–9 Ma Bermejo basin resulted from spatially variable crustal loading on a lithosphere of spatially variable strength (e.g. elastic thickness). Reconstruction of the crustal loads added between 20 and 9 Ma, and assessment of the effects of these loads on an elastic, isotropic lithosphere confirm this hypothesis. Elastic models effectively explain tectonic subsidence east of the Iglesia–Calingasta basin, but west of it crustal loads were locally compensated. Elastic models also prove that the 20–9 Ma Frontal Cordillera loading is of no importance in the mechanical system of the Bermejo basin. 2D and 3D elastic models of a uniformly strong lithosphere under 20–9 Ma crustal loads corrected for post‐9 Ma erosion successfully replicate the 9 Ma Bermejo basin's proximal palaeotopography. However, they fail to replicate the 9 Ma basin's medial and distal palaeotopography. A 3D finite element model of a lithosphere with bimodal strength (weak below the Bermejo basin and west of the Precordillera, and strong below the Precordillera and east of the Valle Fértil lineament) successfully replicates the 9 Ma basin's palaeotopography. That variable strength model introduces a southward decrease in the wavelength of flexural deformation, which results in a basin that narrows southward, consistent with the 9 Ma Bermejo basin. The preferred 9 Ma lithospheric strength distribution is similar to the present lithospheric strength field derived from gravity data, suggesting that the bimodal strength signature was retained throughout the entire basin's evolution. Late Miocene flattening of the subducting slab, tectonic change to a broken foreland, or deposition of a thick (～8–10 km) sedimentary cover did not affect the strength of the lithosphere underlying the Bermejo basin. The long‐term bimodal strength field does not correlate with the documented thickness of the seismogenic crust.     

The inception and early evolution of the North Alpine Foreland Basin, Switzerland

The stratigraphy of the Eocene-Miocene peripheral foreland basin in Switzerland consists of basal deposits of Nummulitic Limestones and Globigerina Marls representing a phase of deepening, followed by two shallowing-up megacycles culminating in fully continental sedimentation. The onset of sedimentation was diachronous and took place on an unconformity surface with increasing stratigraphic gap to the north and west. In the Ultrahelvetic units, which were derived from the south and have a provenance between the Helvetic shelf and the Penninic ocean, the stratigraphic gap is minimal. This restricts the initiation of erosion of the southern European margin due to emersion to post-Maastrichtian and pre-late Palaeocene. This coincides with the final closing of the Valais trough and may therefore be interpreted as the point at which continental flexure s. s. started. In the autochthon, the subcrop map of the unconformity surface shows that the regional pattern of subcropping units is oblique to both neo-Alpine tectonic structures and Helvetic (Mesozoic) passive margin structures. There are local zones of disruption to the broad regional pattern suggesting that the basal unconformity was corrugated. Both the paliaspastic restoration of the autochthon relative to the thrust front during the Palaeocene, and the regional pattern of erosion indicate that the basal unconformity may be due to erosion of a flexural forebulge. Following deposition of the shallow water Nummulitic Limestones and the deeper water Globigerina Marls, clastic sediments were shed from the orogenic wedge in the south. These turbidites, the Taveyannaz Sandstones, filled both ponded basins at the contemporaneous thrust front and the frontal trench or foredeep. Evidently, early thrusts drove at a shallow level into the embryonic basin as ‘front-runners’, whereas most shortening and uplift continued to take place within the main part of the orogenic wedge further to the south. Eventually, the frontal palaeohighs, together with the turbidite basins, were buried by the northward emplacement of surface mud-slides, and sediment depocentres were translated northwards onto the foreland. The most likely cause of the underfilled ‘Flysch’ stage is the rapid advance of a submarine thrust wedge over the flexed European plate which resulted in (i) low sediment fluxes and (ii) high subsidence rates associated with the rapid migration of the load and depocentre. Later, as the rate of advance slowed and the wedge became subaerially exposed, the basin rapidly filled with coarse-grained detritus representing the ‘Molasse’ stage.     

Importance of inherited rift margin structures in the early North Alpine Foreland Basin, Switzerland

The earliest evolution of the North Alpine Foreland Basin in Switzerland was characterized by deposition in small, structurally partitioned sub-basins during the Late Cretaceous and Early Tertiary, rather than in a single, large foredeep. These sub-basins, which were probably located between old rift margin fault-blocks reactivated during Alpine compression, were incorporated into the thrust wedge during thin-skinned deformation. In eastern Switzerland, the most external sub-basins with respect to the orogenic wedge (North Helvetic Flysch and Blattengrat units) have at their base an unconformity attributed to flexural forebulge erosion. More internal sub-basins (Sardona and Prättigau units) contain a conformable succession from the underlying passive margin stage and are dominated by deep-water sedimentation. In western Switzerland, both external sub-basins, now found in the Helvetic Diablerets and Wildhorn nappes, and deep-water internal sub-basins (Höchst-Meilleret Flysch, Neisen Flysch, Tarentaise Flysch) preserve a well-developed basal unconformity. Comparison of the eastern and western Swiss transects shows important intrabasinal lateral variations to be present. The western Swiss area was a topographic high for much of the Late Cretaceous and Early Tertiary; this is demonstrated by the increased chronostratigraphic gap at the karstified basal unconformity surface in western Switzerland. The strata onlapping this unconformity young to the west, suggesting that drowning of the emergent area was delayed compared with the east. In addition, reactivation and uplift of the rift margin structures occurred earlier in western Switzerland compared with eastern Switzerland. There is therefore strong evidence for lateral topographic gradients in the early foreland basin caused by differential amounts of tectonic reactivation of rift margin structures. In the early foreland basin-fill, these lateral variations are as important in determining depositional patterns as strike-normal changes across the basin.     

Late Holocene climate change inferred from the lithology and chemical stratigraphy of sediment cores from Swan Lake,Nebraska Sandhills,USA

Journal of Paleolimnology - Continuous sediment cores H1 (11.0 m long) and H2 (8.5 m long), collected from Swan Lake, in the Nebraska Sandhills (USA), contain a sandy silt...     

Axial–transverse fluvial interactions in half-graben: Plio-Pleistocene Palomas Basin, southern Rio Grande Rift, New Mexico, USA

Accurate magnetostratigraphic dating of Plio-Pleistocene alluvium in the Palomas half-graben permits correlation of transverse and axial deposits, thus enabling analysis of the movement of alluvial facies belts in time and space for the first time. Northern areas show evidence for basinward progradation of footwall-sourced Matuyama-age alluvial fan deposits over axial channel belt deposits of the ancestral Rio Grande, despite both deposits having similar deposition rates. This gradual ‘forced’ westward migration of the axial belt was in opposition to ongoing eastward growth of hangingwall-sourced fans and tectonic tilt imposed by the bounding Caballo normal fault. Fan growth was coincident with a recently proposed gradual climatic shift that may have increased sediment flux out of transverse catchments. It is also possible that continuing tectonic footwall uplift and divided retreat caused catchment areas to increase, contributing to these trends. Southern areas of the Palomas half-graben feature late Gilbert/early Gauss deposits indicative of rapid westwards progradation of large low-gradient, footwall-sourced fans over axial deposits. This ‘forced’ migration of the ancestral Rio Grande may have occurred due to footwall catchment and fan growth consequent upon initiation and growth of the Red Hills Fault. Subsequent eastward movement of the axial channel belt in late Gauss and Matuyama times overwhelmed these large fans. We attribute this to continued tilting on the Red Hills Fault and to development of the Jornada Fault to the south-east, the axial river belt avulsing north and eastwards through a developing Red Hills/Jornada crossover transfer zone. We conclude generally that facies architecture of axial and transverse elements in half-graben must reflect both climatic influences and the effects of fault development. Careful field mapping, accurate dating and palaeoclimatic studies are all necessary to determine the relative importance of these controls. Although adequate as broad guides, previous purely ‘fixist’ tectonosedimentary models allow for no fault growth, decay or climatic modulation of facies trends and are thus generally inadequate to explain important aspects rift basin stratigraphy.     

Deposition and diagenesis of the lacustrine-fluvial Cangfanggou Group (uppermost Permian to Lower Triassic), southern Junggar Basin,NW China: a contribution from sequence stratigraphy

The Junggar Basin in NW China contains lacustrine hydrocarbon source rocks which are among the highest quality of hydrocarbon potential in the world. Oil reservoirs in the basin are very substantial: target reservoirs span Carboniferous to Tertiary strata and include Permo-Triassic lacustrine and fluvial sandstones. The Junggar Basin was a foreland basin during the late Permian to Cenozoic, possibly with strike-slip tectonics at the southern margin during Mesozoic time. The Cangfanggou Group, as one of the major reservoirs, is well-exposed in the eastern part of the southern Junggar Basin. A measured outcrop section and a number of borehole logs coupled with resistivity logs were used to attempt sequence stratigraphic analysis. Detailed sedimentological studies on the outcrops and borehole cores have demonstrated that the Cangfanggou Group is characterized by alternating lacustrine and fluvial deposits. Four depositional sequences have been recognized. For each sequence, the basal boundary is marked by erosional truncation of fluvial channel conglomeratic sandstones in sharp contact with underlying lacustrine or floodplain mudstones. The top of each lowstand systems tract is normally overlain by the transition to lacustrine or maximum flooding surface. The transgressive systems tract is normally not identifiable at the basin margin, but was developed in the basinward area and characterized by interbedded fining-upward distal fluvial and shallow lacustrine deposits. The highstand systems tract at the basin margin is characterized by very thick floodplain mudstones or shallow lacustrine deposits, and by typical coarsening-upward parasequences of shallow lacustrine deposits in more basinward areas. Sediment input to the basin was controlled by tectonics and climate. Depositional sequences were probably controlled by fluctuating change of lake level: this was in turn controlled by climate (runoff), modified by tectonics in specific areas.The sandstones studied are exclusively volcanic litharenites. Diagenetic studies suggest that the calcite cementation, pore-filling clay minerals and zeolites occluded substantial porosity in the sandstones examined because they are compositionally immature. However, notable secondary porosity in varying proportions is present in the sandstones of the Cangfanggou Group, resulting from the dissolution of unstable detrital grains. The lowstand fluvial/distal fluvial sandstones recorded the highest average porosity and highest permeability, in which some primary porosity may remain because early formed clay coatings inhibited further compaction. The combination of residual primary porosity and significant amount of secondary porosity in the sandstones of the Cangfanggou Group may constitute moderate to good reservoirs. In contrast, the lacustrine fine-grained sandstones is characterized by clay authigenesis and zeolitization, in which the porosity was obliterated by the zeolites and extensive illitization; the lowstand fluvial channel sandstones in the basin margin areas are characterized by extensive calcite cementation which greatly reduced the porosity and permeability.This is the fifth paper in a series of papers published in this issue on Climatic and Tectonic Rhythms in Lake Deposits.     

Synclinal-horst basins: examples from the southern Rio Grande rift and southern transition zone of southwestern New Mexico, USA

In areas of broadly distributed extensional strain, the back‐tilted edges of a wider than normal horst block may create a synclinal‐horst basin. Three Neogene synclinal‐horst basins are described from the southern Rio Grande rift and southern Transition Zone of southwestern New Mexico, USA. The late Miocene–Quaternary Uvas Valley basin developed between two fault blocks that dip 6–8° toward one another. Containing a maximum of 200 m of sediment, the Uvas Valley basin has a nearly symmetrical distribution of sediment thickness and appears to have been hydrologically closed throughout its history. The Miocene Gila Wilderness synclinal‐horst basin is bordered on three sides by gently tilted (10°, 15°, 20°) fault blocks. Despite evidence of an axial drainage that may have exited the northern edge of the basin, 200–300 m of sediment accumulated in the basin, probably as a result of high sediment yields from the large, high‐relief catchments. The Jornada del Muerto synclinal‐horst basin is positioned between the east‐tilted Caballo and west‐tilted San Andres fault blocks. Despite uplift and probable tilting of the adjacent fault blocks in the latest Oligocene and Miocene time, sediment was transported off the horst and deposited in an adjacent basin to the south. Sediment only began to accumulate in the Jornada del Muerto basin in Pliocene and Quaternary time, when an east‐dipping normal fault along the axis of the syncline created a small half graben. Overall, synclinal‐horst basins are rare, because horsts wide enough to develop broad synclines are uncommon in extensional terrains. Synclinal‐horst basins may be most common along the margins of extensional terrains, where thicker, colder crust results in wider fault spacing.     

Tectonic implications of new Appalachian Ultradeep Core Hole (ADCOH) seismic reflection data from the crystalline southern Appalachians

Summary. Some 180 km of new VIBROSEIS profiles have been acquired in the southern Appalachian Inner Piedmont, Brevard fault zone and eastern Blue Ridge as part of the ADCOH Project site investigation. These data are of the highest quality yet obtained in a crystalline terrane in the US, perhaps in the world, and reveal several conclusions that should have a direct bearing upon the world-wide nature of composite crystalline thrust sheets and their modes of interaction with the platform rocks beneath. Strong reflections previously interpreted as the base of the crystalline sheet are clearly part of the platform sedimentary (clastic rocks) sequence resting upon the autochthonous basement and early Palaeozoic rift basins. This reflection package and related transparent zones are clearly repeated beneath the crystalline sheet indicating a complex of thrusts repeating units within the platform succession. Reflectors (granitoid-amplibolite contacts) in the crystalline sheet in the Inner Piedmont represent recumbent folds of similar wavelengths and amplitudes to folds mappable on the surface. Duplexing of platform rocks beneath the crystalline sheet appears to have resulted in doming of the crystalline sheet. Similarly, duplex formation in the platform was probably controlled by both the thickness of the crystalline sheet and the rheological properties of the platform succession.     

Fluvial deposition during transition from flexural to dynamic subsidence in the Cordilleran foreland basin: Ericson Formation,Western Wyoming,USA

The Ericson Formation was deposited in the distal foredeep of the Cordilleran foreland basin during Campanian time. Isopach data show that it records early dynamic subsidence and the onset of basin partitioning by Laramide uplifts. The Ericson Formation is well exposed around the Rock Springs uplift, a Laramide structural dome in southwestern Wyoming; the formation is thin, regionally extensive, and does not display the wedge‐shaped geometry typical of foredeep deposits. Sedimentation in this area was controlled both by activity in the thrust belt and by intraforeland tectonics. The Ericson Formation is ideally situated both spatially and temporally to study the transition from Sevier to Laramide (thin‐ to thick‐skinned) deformation which corresponded to the shift from flexural to dynamic subsidence and the demise of the Cretaceous foreland basin system. We establish the depositional age of the Ericson Formation as ca. 74 Ma through detrital zircon U–Pb analysis. Palaeocurrent data show a generally southeastward transport direction, but northward indicators near Flaming Gorge Reservoir suggest that the intraforeland Uinta uplift was rising and shedding sediment northward by late Campanian time. Petrographic data and detrital zircon U–Pb ages indicate that Ericson sediment was derived from erosion of Proterozoic quartzites and Palaeozoic and Mesozoic quartzose sandstones in the Sevier thrust belt to the west. The new data place temporal and geographic constraints on attempts to produce geodynamic models linking flat‐slab subduction of the oceanic Farallon plate to the onset of the Laramide orogenic event.     

Insights into syndepositional fault movement in a foreland basin; trends in seismites of the Upper Cretaceous,Wahweap Formation,Kaiparowits Basin,Utah, USA

The Upper Cretaceous Wahweap Formation accumulated in the active Cordilleran foreland basin of Utah. Soft‐sediment deformation structures are abundant in the capping sandstone member of the Wahweap Formation. By comparing with well‐established criteria, a seismogenic origin was determined for the majority of structures, which places these soft‐sediment deformation features in a class of sedimentary features referred to as seismites. A systematic study of the seismite trends included their vertical and horizontal distribution and a semi‐quantitative intensity analysis using a scale from 1 to 5 that is based on magnitude, sedimentary structure type, and the predominance of inferred process of hydroplastic deformation, liquefaction or fluidization. In addition, orientations of soft‐sediment fold axes were recorded. Construction of a northwest‐to‐southeast stratigraphic and seismite intensity cross‐section demonstrates: (1) reduction in stratigraphic thickness and percentage of conglomerates to the southeast, (2) the presence of lower seismite, middle nonseismite, and upper seismite zones within the capping sandstone (permitting subdivision of the capping sandstone member), and (3) elimination of the nonseismite zone and amalgamation of the lower and upper seismite zones to the southeast. Regional isoseismal contour maps generated from the semi‐quantitative analysis indicate a decrease in overall intensity from northwest to southeast in the upper and lower seismic zones and in sandstone within 5 m stratigraphically of the contact between the upper and capping sandstone members. In addition, cumulative seismite fold orientations support a west–northwest direction towards regional epicentres. Isoseismal maps are used to distinguish the effects of intrabasinal normal faulting from those of regional orogenic thrusting. Thus, this study demonstrates the utility of mapping seismites to separate the importance of regional vs. local tectonic activity influencing foreland basin sedimentation by identifying patterns that delineate palaeoepicentres associated with specific local intrabasinal normal faults vs. regional trends in soft‐sediment deformation related to Sevier belt earthquakes.     

Probability maps of landslide reactivation derived from tree-ring records: Pra Bellon landslide, southern French Alps

Probability maps of landslide reactivation are presented for the Pra Bellon landslide located in the southern French Alps based on results obtained with dendrogeomorphic analysis. Spatiotemporal patterns of past landslide activity was derived from tree-ring series of 403 disturbed mountain pine trees growing in the landslide body. In total, 704 growth disturbances were identified in the samples indicating 22 reactivation phases of the landslide body between 1910 and 2011. The mean return period was 4.5 years. Given the spatiotemporal completeness of the reconstruction, probabilities of landslide reactivation were computed and illustrated using a Poisson distribution model and for 5, 20, 50, and 100 years. Probability of landslide reactivation is highest in the central part of the landslide body and increases from 0.13 for a 5-year period to 0.94 for a 100-year period. Conversely, probabilities of reactivation are lower at its margins. The proposed method differs from conventional approaches based on statistical analyses or physical modeling that have demonstrated to have limitations in the prediction of spatiotemporal reactivation of landslides. Our approach is, in contrast, based on extensive data on past landslides and therefore allowed determination of quantitative probability maps of reactivation derived directly from the frequency of past events. This approach is considered a valuable tool for land managers in charge of protecting and forecasting people and their assets from the negative effects of landslides as well as for those responsible for land use planning and management. It demonstrates the reliability of dendrogeomorphic mapping that should be used systematically in forested shallow landslides.     

A major seismogenic fault in a 'silent area': the Castrovillari fault (southern Apennines, Italy)

Large historical earthquakes in Italy define a prominent gap in the Pollino region of the southern Apennines. Geomorphic and palaeoseismological investigations in this region show that the Castrovillari fault (CF) is a major seismogenic source that could potentially fill the southern part of this gap. The surface expression of the CF is a complex, 10–13 km long set of prominent scarps. Trenches across one scarp indicate that at least four surface-faulting earthquakes have occurred along the CF since Late Pleistocene time, each producing at least 1 m of vertical displacement. The length of the fault and the slip per event suggest M =6.5-7.0 for the palaeoearthquakes. Preliminary radiocarbon dating coupled with historical considerations imply that the most recent of these earthquakes occurred between 380 BC and 1200 AD, and probably soon after 760 AD; no evidence for this event has been found in the historical record. We estimate a minimum recurrence interval of 1170 years and a vertical slip rate of 0.2-0.5 mm yr^-1 for the CF, which indicates that the seismic behaviour of this fault is comparable to other major seismogenic faults of the central-southern Apennines. The lack of mention or the mislocation of the most recent event in the historical seismic memory of the Pollino region clearly shows that even in Italy, which has one of the longest historical records of seismicity, a seismic hazard assessment based solely on the historical record may not be completely reliable, and shows that geological investigations are critical for filling possible information gaps.     

Post‐orogenic evolution of the Mesozoic Micang Shan Foreland Basin system,central China

[Correction added after online publication 3 August 2010 ‐ ‘prelate’ has been changed to ‘pre‐late’ throughout the text]. Using apatite fission track and (U‐Th‐Sm)/He thermochronology, we report the low‐temperature thermal history of the Mesozoic Micang Shan Foreland Basin system, central China. This system, comprising the Hannan Dome hinterland, the northern Sichuan Foreland Basin and the intermediate frontal thrust belt (FB), shares a common boundary with three major tectonic terrains – Mesozoic Qinling‐Dabie Orogen, Mesozoic Sichuan Foreland Basin and Cenozoic elevated Tibetan Plateau. Results show: (1) a relatively rapid pre‐late Cretaceous cooling episode in the Hannan Dome; (2) a mid‐Cenozoic cooling phase (ca. 50°C at ca. 30 ± 5 Ma) within the northern Sichuan Basin; and (3) possible late Cenozoic cooling (ca. 25°C at ca. 16 ± 4 Ma) within the Hannan Dome‐FB, a phase which has also been reported previously from adjacent regions. The pre‐late Cretaceous cooling episode in the Hannan Dome is attributed to coeval tectonism in nearby regions. Mid‐Cenozoic cooling in the northern Sichuan Basin can possibly be attributed to either one of or a combination of shortening of the basin, onset of the Asian monsoon and drainage adjustment of the Yangtze River system, all of which are related to growth of the Tibetan Plateau. Possible late Cenozoic cooling in the hinterland and nearby regions is also probably related to the northeastward growth of the Tibetan Plateau. However, previous studies suggest a northeastward propagation for onset of cooling from the eastern Tibetan Plateau to western Qinling in response to northeastward lower crust flow from the central Tibetan Plateau. The timing of apparent late Cenozoic cooling in the Hannan Dome hinterland, at an intermediate locality, is not consistent with this trend, and supports a previous model suggesting northeastern growth of the Tibetan Plateau through reactivation of WE trending strike‐slip faults.     

黄河上游官亭盆地喇家遗址地层光释光测年研究

通过对黄河上游官亭盆地喇家遗址周围黄河第二级阶地广泛的野外考察,在官亭镇下喇家村段发现了典型的风成黄土土壤层。在地层剖面可见其齐家文化层古地面被数组地震裂隙分割。有一层团块状的、鲜艳的红色粘土质泥流层覆盖了遗址的古地面,并且填充了地震裂隙。经过详细观测和采集光释光样品,应用单片再生剂量法(SAR) 获得该剖面样品的光释光(OSL) 年龄值。在此基础上,结合大量¹⁴C年龄数据和地层对比方法,确定官亭盆地黄河第二级阶地形成在35.00 ka BP,其后风成黄土土壤剖面开始发育。同时断定全新世古土壤S₀中间所夹红色粘土泥流沉积层及其下的地震裂隙的形成年代为3.95 ka BP。结合磁化率和粒度成分等气候替代指标分析,表明在35.00~11.50 ka BP 晚更新世晚期,亦即末次冰期的晚期(MIS-2),气候寒冷干燥,沙尘暴活动旺盛,在官亭盆地第二级阶地上堆积了典型的马兰黄土层(L_1-1)。在11.50~8.50 ka BP全新世早期,沙尘暴活动堆积了具有过渡性质的黄土层(L_t),反映气候逐渐变暖。在8.50~3.10 ka BP 全新世中期大暖期,气候变得温暖湿润,降水量增多,沙尘暴活动减弱,风化成壤作用强烈,堆积形成了黑垆土类古土壤层(S_0下、S_0上)。     

Relation between deformation and seismicity in the active fault zone of Kamchatka, Russia

In the regional geodetic network of the Russian Far East, an active fault zone of the Kamchatka peninsula has been selected in order to study the relation between seismic activity and deformation. This paper provides the first results of a detailed and high-precision 3-km long levelling profile, along which geodetic data have been collected weekly for almost three years. The data processing and analytical methods that were originally used have been elaborated for this particular type of very small local network. In the active fault zone, two distinct ways of releasing accumulated potential energy, i.e. seismicity and 'fault superintensive movements', have been registered. The inverse correlation that is discovered between deformation rate and seismic activity could be useful in earthquake forecasts.