Volcaniclastic resedimentation in distal fluvial basins induced by large-volume explosive volcanism: the Ebisutoge–Fukuda tephra, Plio-Pleistocene boundary, central Japan

The Ebisutoge–Fukuda tephra (Plio‐Pleistocene boundary, central Japan) has a well‐recorded eruptive style, history, magnitude and resedimentation styles, despite the absence of a correlative volcanic edifice. This tephra was ejected by an extremely large‐magnitude and complex volcanic eruption producing more than 400 km³ total volume of volcanic materials (volcanic explosivity index=7), which extended more than 300 km away from the probable eruption centre. Remobilization of these ejecta occurred progressively after the completion of a series of eruptions, resulting in thick resedimented volcaniclastic deposits in spatially separated fluvial basins, more than 100 km from the source. Facies analysis of resedimented volcaniclastic deposits was carried out in distal fluvial basins. The distal tephra (≈100–300 km from the source) comprises two different lithofacies, primary pyroclastic‐fall deposits and reworked volcaniclastic deposits. The resedimented volcaniclastic succession shows five distinct sedimentary facies, interpreted as debris‐flow deposits (facies A), hyperconcentrated flow deposits (facies B), channel‐fill deposits (facies C), floodplain deposits with abundant flood‐flow deposits (facies D) and floodplain deposits with rare flood deposits (facies E). Resedimented volcaniclastic materials at distal locations originated from unconsolidated deposits of a climactic, large ignimbrite‐forming eruption. Factors controlling inter‐ and intrabasinal facies changes are (1) temporal change of introduced volcaniclastic materials into the basin; (2) proximal–distal relationship; and (3) distribution pattern of pyroclastic‐flow deposits relative to drainage basins. Thus, studies of the Ebisutoge–Fukuda tephra have led to a depositional model of volcaniclastic resedimentation in distal areas after extremely large‐magnitude eruptions, an aspect of volcaniclastic deposits that has often been ignored or poorly understood.     

Impacts of explosive volcanism on distal alluvial sedimentation: Examples from the Pliocene–Holocene volcaniclastic successions of Japan

Volcanic activities can create cataclysmic hazards to surrounding environments and human life not only during the eruption but also by hydrologic remobilisation (lahar) processes after the cessation of eruptive activity. Although there are many studies dealing with the assessment and mitigation of volcanic hazards, these are mostly concentrated on primary eruptive processes in areas proximal to active volcanoes. However, the influence of volcaniclastic resedimentation may surpass the impacts of primary eruptive activity in terms of both extent and persistence, and can ultimately result in severe hazards in downstream areas.Examination of the volcaniclastic successions of non-marine Pliocene–Holocene sedimentary basins in Japan has revealed hydrological volcaniclastic sedimentation in fluvial and lacustrine environments hundreds of kilometres from the inferred source volcano. Impacts on these distal and often spatially separated basins included drastic changes in depositional systems caused by sudden massive influxes of remobilised pyroclastic material. Typical volcaniclastic beds comprise centimetre- to decimetre-thick primary pyroclastic fall deposits overlain by metre- to 10s of metres-thick resedimented volcaniclastic deposits, intercalated in sedimentary successions of non-volcanic provenance. The relatively low component of primary pyroclastic fall deposits in the volcaniclastic beds suggests that: 1) potential volcanic hazards would be underestimated on the basis of primary pyroclastic fall events alone; and 2) the majority of resedimented material was likely derived from erosion of non-welded pyroclastic flow deposits in catchment areas rather than remobilisation of local fallout deposits from surrounding hillslopes.The nature, distribution and sequence of facies developed by distal volcaniclastic sediments reflect the influence of: 1) proximity to ignimbrite, but not directly with the distance to the eruptive centre; 2) ignimbrite nature (non-welded or welded) and volume; 3) temporal changes in sediment flux from the source area; 4) the physiography and drainage patterns of the source area and the receiving basin, and any intervening areas; and 5) the formation of ephemeral dam-lakes and intra-caldera lakes whose potential catastrophic failure can impact distal areas. Models of the styles and timing of distal volcaniclastic resedimentation are thus more complicated than those developed for proximal settings of stratovolcanoes and their volcaniclastic aprons and hence present different challenges for hazard assessment and mitigation.     

Stratigraphy and volcanology of the Türkbükü volcanics: products of a stratovolcano in the Bodrum Peninsula,SW Anatolia

The Middle‐Upper Miocene Bodrum magmatic complex of the Aegean region, southwestern Turkey, is mainly represented by intermediate stocks, lavas, pyroclastic and volcaniclastic deposits. Monzonitic stocks and connected porphyry intrusions and extrusions are the first products of the magmatism. These are followed by a volcanic succession consisting of andesitic‐latitic lavas, autobrecciated lavas, pyroclastic and volcaniclastic deposits. The final stage is represented by basaltic and basaltic andesitic flows and dykes intruded into previous units. The volcanic succession crops out in the northern part of the Bodrum peninsula. In the lower part of this succession are widespread pyroclastic deposits, composed of pyroclastic fall and flow units, alternating with epiclastic deposits. Grain size, volume and thickness of the pyroclastic deposits were mainly controlled by the type, magnitude and intensity of the eruption. Further up the section, there are two horizons of debris avalanche deposits forming the coarsest and thickest deposits of the volcaniclastic succession. The debris avalanche deposits indicate at least two different flank collapses coeval with the volcanism. The stratigraphy and map pattern of these volcanic units imply that the northern part of the Bodrum peninsula was the north‐facing flank of a stratovolcano during the mid‐Late Miocene. Copyright © 2006 John Wiley & Sons, Ltd.     

The fluvial and pyroclastic deposits of the Cagayan Basin, Northern Luzon, Philippines—an example of non-marine volcaniclastic sedimentation in an interarc basin

ABSTRACT The Cagayan basin of Northern Luzon, an interarc basin 250 km long and 80 km wide, contains a 900 m thick sequence of Plio-Pleistocene fluvial and pyroclastic deposits. These deposits are divided into two formations, the Ilagan and Awidon Mesa, and three lithofacies associations. The facies, which are interpreted as meandering stream, braided stream, lahar, and pyroclastic flow and fall deposits, occur in a coarsening upward sequence. Meandering stream deposits interbedded with tuffs are overlain by braided stream deposits interbedded with coarser pyroclastic deposits; lahars and ignimbrites. The coarsening upward volcaniclastic deposits reflect the tectonic and volcanic evolution of the adjacent Cordillera Central volcanic arc. Uplift of the arc resulted in the progradation of coarser clastics further into the basin, the development of an alluvial fan, and migration of the basin depocentre away from the arc. The coarsening of the pyroclastic deposits reflects the development of a more proximal calc-alkaline volcanic belt in the maturing volcanic arc. The Cagayan basin sediments serve as an example of the type and sequence of non marine volcaniclastic sediments that may form in other interarc basins. This is because the tectonic and volcanic processes which controlled sedimentation in the Cagayan basin also affect other arc systems and will therefore control or significantly influence volcaniclastic sedimentation in other interarc basins.     

Note on the evolution of a Miocene composite volcano in an extensional setting, Zârand Basin (Apuseni Mts., Romania)

Bontâu is a major eroded composite volcano filling the Miocene Zârand extensional basin, near the junction between the Codru-Moma and Highi?-Drocea Mountains, at the tectonic boundary between the South and North Apuseni Mountains. It is a quasi-symmetric structure (16–18 km in diameter) centered on an eroded vent area (9×4 km), buttressed to the south against Mesozoic ophiolites and sedimentary deposits of the South Apuseni Mountains. The volcano was built up in two sub-aerial phases (14–12.5 Ma and 11–10 Ma) from successive eruptions of andesite lava and pyroclastic rocks with a time-increasing volatile budget. The initial phase was dominated by emplacement of pyroxene andesite and resulted in scattered individual volcanic lava domes associated marginally with lava flows and/or pyroclastic block-and-ash flows. The second phase is characterized by amphibole-pyroxene andesite as a succession of pyroclastic eruptions (varying from strombolian to subplinian type) and extrusion of volcanic domes that resulted in the formation of a central vent area. Numerous debris flow deposits accumulated at the periphery of primary pyroclastic deposits. Several intrusive andesitic-dioritic bodies and associated hydrothermal and mineralization processes are known in the volcano vent complex area. Distal epiclastic deposits initially as gravity mass flows and then as alluvial volcaniclastic and terrestrial detritic and coal filled the basin around the volcano in its western and eastern part. Chemical analyses show that lavas are calc-alkaline andesites with SiO₂ ranging from 56–61%. The petrographical differences between the two stages are an increase in amphibole content at the expense of two pyroxenes (augite and hypersthene) in the second stage of eruption; CaO and MgO contents decrease with increasing SiO₂. In spite of a ～4 Ma evolution, the compositions of calc-alkaline lavas suggest similar fractionation processes. The extensional setting favored two pulses of short-lived magma chamber processes.     

Late-orogenic basins in the Archaean Superior Province, Canada: characteristics and inferences

The late-orogenic Archaean Duparquet, Kirkland and Stormy basins of the Canadian Superior Province are characterized by bounding crustal-scale faults and abundant porphyry stock emplacement. Lava flows and pyroclastic deposits are restricted to the Kirkland and Stormy basins, and coarse clastic detritus characterizes the Duparquet basin. Seven distinct lithofacies are identified: (1) mafic volcanic, (2) felsic volcanic, (3) pyroclastic, (4) volcaniclastic, (5) conglomerate-sandstone, (6) sandstone-argillite  conglomerate), and (7) argillite-sandstone  tuffaceous sandstone). The mafic and felsic volcanic lithofacies represent effusive lava flows, the pyroclastic lithofacies is formed of subaerial surge and airfall deposits and the volcaniclastic lithofacies is composed of reworked volcanic debris. The conglomerate-sandstone lithofacies is interpreted as alluvial fan, fan delta or proximal braided stream deposits, whereas the sandstone-argillite lithofacies is consistent with sandy-dominated flood- or braidplain deposits. A dominantly shallow-water lacustrine setting is inferred for the argillite-sandstone lithofacies. These different lithofacies record the basin history and can be used to identify basin-forming processes. Lithofacies stacking and rapid lateral changes of lithological units in conjunction with interformational unconformities and basin margin faults suggest tectonically induced sedimentation. Volcanism can also influence basin evolution and the delicate balance between erosion, sedimentation, and prevalent transport processes is affected by volcanic input. Catastrophic influx of pyroclastic material facilitated mass-wasting processes and formation of non-confined hyperconcentrated flood flow deposits account for local congestion of alluvial or fluvial dispersal patterns. Confined stream flow processes govern sedimentation during intravolcanic phases or prominent tectonic uplift. In addition, climate which controls the weathering processes, and vegetation which stabilizes unconsolidated material, affects the transport and depositional process. A CO₂-rich aggressive weathering, humid Archaean atmosphere favours traction current deposits and an absence of vegetation promotes rapid denudation. Although tectonism is the prevalent long-term controlling factor in restricted basins, the effects of volcanism, climate and lack of vegetation can also be detected.     

Formation of Subaqueous Felsic Domes and Accompanying Pyroclastic Deposits on the Foça Peninsula (Izmir,Turkey)

In western Anatolia, a thick volcanic succession of andesitic to rhyolitic lavas and volcaniclastic rocks crops out extensively. On Foça Peninsula, the westernmost part of the region, a dominantly rhyolitic sequence is exposed where massive rhyolites occur as dome or domelike stubby lava flows. These rhyolite domes vertically and laterally pass into blanketing volcaniclastic sequences. The gradational boundary relations and the facies characteristics of the surrounding volcaniclastic sequences indicate that the silicic domes directly intruded a subaqueous environment and were shattered upon sudden contact with water to form hyaloclastic blankets.

In and around these rhyolite domes, we have defined six different volcanic and volcaniclastic facies, consisting of: (1) massive rhyolite; (2) massive perlite; (3) hyaloclastic breccias; (4) rhyolite pumice and lithic fragment-bearing volcaniclastic rocks; (5) subaqueous welded ignimbrites; and (6) brecciated perlite. The massive rhyolite facies have distinct structures from the centers to the peripheries of the domes and stubby lava flows. Massive lava facies gradually pass into hyaloclastic breccias and massive perlite facies, indicating water-magma interaction during the emplacement. Phreatomagmatic explosive activity and doming caused the subaqueous pyroclastic flows on the flanks of the volcanic center. Welding in the upper parts of these pyroclastic flow deposits indicates the high-temperature emplacement of the pyroclastic material and relatively slow cooling caused by the cushioning effect of the gas-vapor mixture and rapid deposition of younger pyroclastic units.     

中国火山灾害区划研究历史回顾与未来展望

火山灾害区划是防御和减轻火山灾害的一种有效的方法.以中国境内规模最大、喷发危险性最高、潜在火山灾害最强的长白山天池火山为例,回顾我国火山灾害区划研究历史,讨论典型火山喷发活动引起的主要火山灾害类型、成灾机制和灾害效应,总结不同历史阶段各种不同类型火山灾害区划图的优缺点,并结合目前国际上火山灾害区划的研究现状和编图技术,对我国未来编制具有概率含义的火山灾害区划图的思路提出展望.     

The January 10, 1997 Pozzano landslide, Sorrento Peninsula, Italy

From 1997 to 1999, a huge number of slides, often turning into extremely rapid debris-earth flows, repeatedly affected the late Quaternary volcaniclastic deposits mantling the carbonate slopes of Campania region, Italy. The Sorrento Peninsula was the epicentral district of the 1997 regional slope-instability crisis. Some hundred shallow mass movements took place during January 1997 in this area. These were the last episode of a long series of slope failure events dating back to mid-18th century. Results from geological and geomorphologic surveys are presented. Landslide mechanism and triggering factors are analysed for the most important mass movement, which occurred during the January 9-11, 1997, regional event. On January 10, 1997, at about 8:15 PM, a rainfall-induced debris slide-debris flow occurred at Pozzano (province of Naples), mainly affecting the 79 AD pyroclastic products. Following a J-path, the landslide destroyed a private house and invaded the State Road no. 145. This event resulted in four deaths, 22 persons injured and road closure for about 2 months. There was less than 200 mm of rainfall in the 72-h period prior to the landslide, although intense precipitation had occurred during a preceding 4-month period. However, the slope failure event was not preceded by an extreme short-term antecedent rainfall, as already noticed in previous landslides of this type in Campania. Finally, following a preliminary geotechnical characterization of volcaniclastic soils, a slope-stability back analysis was carried out, which adopted the classical infinite slope scheme. This analysis gave further evidence of the role played by pore pressure in reducing the overall shear strength of pyroclastic soils.     

Syndepositional volcanism in the Rietgat and arenaceous Bothaville Formations,Ventersdorp Supergroup (late Archaean—early Proterozoic), in South Africa

The volcanic-sedimentary succession of the Ventersdorp Supergroup which is virtually undisturbed tectonically and of low-grade (greenschist facies) metamorphism, affords a unique opportunity for studying the interplay between volcanic and sedimentary processes. The transitional sequence between the Rietgat and Bothaville Formations consists of a number of lithofacies. These are a basal breccia representing pyroclastic and laharic deposits, an overlying breccia—arenite—conglomerate (BAC) which formed by debris flow and fluvial processes, an arenite deposited offshore during a transgression, and an upper conglomerate laid down on a beach. In the volcaniclastic BAC and arenite lithofacies the presence of thin tuff beds, deformed acid lava fragments (bombs?) and glass shards in the arenaceous matrix suggest syndepositional volcanism.Sedimentation took place along the flanks of an asymmetrical, actively volcanic, domal structure which consisted partly of unstable pyroclastic deposits in the east. Resedimentation of the pyroclastic debris by subaerial debris flows and braided streams built a volcaniclastic fan lobe at the foot of the domal structure. As volcanic activity subsided, sands derived from a granitic terrain, mixed with minor air-fall debris to subsequently cover the fan lobe during a regional transgression.     

Late pleistocene and holocene loess deposits of the Southeastern Buenos Aires province,Argentina

The Late Pleistocene and Holocene loess deposits of the SE Buenos Aires province are composed of four allostratigraphic units that represent four episodes of loess deposition. The first and the second episodes occurred in Late Pleistocene times. The second episode was followed by a soil forming interval (Early Holocene to Mid-Holocene times). The third episode took place at about 5000 yr BP, after the Holocene sea-level maximum when marine regression began. The fourth episode constitutes a historical event of only local significance.Loess shows a fairly constant granulometric and mineralogical composition. The modal fraction consists of very fine sand and coarse silt (3 to 5 phi). They are classified as sandy silts or silty sands. Three grain-size subpopulations are differentiated: coarse, medium and fine. The medium-size subpopulation, which is the most important, consists of most of the very fine sand and coarse silt. It is thought to be transported by modified saltation and short-term suspension during local dust-storms.The mineralogical composition of loess consists of a volcaniclastic assemblage derived mainly from reworked pyroclastic deposits, primary tephras and volcaniclastic sediments. The source area of these materials was located in the lower Colorado river valley about 400 km SW of the studied area. There was also a direct supply by volcanic ash falls.     

Interpretation of neovolcanic versus palaeovolcanic sand grains: an example from Miocene deep-marine sandstone of the Topanga Group (Southern California)

Despite abundant data on volcaniclastic sand(stone), the compositional, spatial and temporal distribution of volcanic detritus within the sedimentary record is poorly documented. One of the most intricate tasks in optical analysis of sand(stone) containing volcanic particles is to distinguish grains derived by erosion of ancient volcanic rocks (i.e. palaeovolcanic, noncoeval grains) from grains generated by active volcanism (subaqueous and/or subaerial) during sedimentation (neovolcanic, coeval grains). Deep-marine volcaniclastic sandstones of the Middle Topanga Group of southern California are interstratified with 3000-m-thick volcanic deposits (both subaqueous and subaerial lava and pyroclastic rocks, ranging from basalt, andesite to dacite). These rocks overlie quartzofeldspathic sandstones (petrofacies 1) of the Lower Topanga Group, derived from deep erosion of a Mesozoic magmatic arc. Changes in sandstone composition in the Middle Topanga Group provide an example of the influence of coeval volcanism on deep-marine sedimentation. Volcaniclastic strata were deposited in deep-marine portions of a turbidite complex (volcaniclastic apron) built onto a succession of intrabasinal lava flows and on the steep flanks of subaerially emplaced lava flows and pyroclastic rocks. The Middle Topanga Group sandstones are vertically organized into four distinctive petrofacies (2–5). Directly overlying basalt and basaltic-andesite lava flows, petrofacies 2 is a pure volcanolithic sandstone, including vitric, microlitic and lathwork volcanic grains, and neovolcanic crystals (plagioclase, pyroxene and olivine). The abundance of quenched glass (palagonite) fragments suggests a subaqueous neovolcanic provenance, whereas sandstones including andesite and minor basalt grains suggest subaerial neovolcanic provenance. This petrofacies probably was deposited during syneruptive Periods, testifying to provenance from both intrabasinal and extrabasinal volcanic events. Deposited during intereruptive periods, impure volcanolithic petrofacies 3 includes both neovolcanic (85%) and older detritus derived from plutonic, metamorphic and palaeovolcanic rocks. During post-eruptive periods, the overlying quartzofeldspathic petrofacies 4 and 5 testify to progressive decrease of neovolcanic detritus (48–14%) and increase of plutonic-metamorphic and palaeovolcanic detritus. The Upper Topanga Group (Calabasas Formation), conformably overlying the Middle unit, has dominantly plutoniclastic sandstone (petrofacies 6). Neovolcanic detritus is drastically reduced (4%) whereas palaeovolcanic detritus is similar to percentages of the Lower Topanga Group (petrofacies 1). In general, the volcaniclastic contribution represents a well-defined marker in the sedimentary record. Detailed compositional study of volcaniclastic strata and volcanic particles (including both compositional and textural attributes) provides important constraints on deciphering spatial (extrabasinal vs. intrabasinal) and temporal relationships between neovolcanic events (pre-, syn-, inter- and post-eruptive periods) and older detritus.     

The relationship between carbonate facies, volcanic rocks and plant remains in a late Palaeozoic lacustrine system (San Ignacio Fm, Frontal Cordillera, San Juan province, Argentina)

The San Ignacio Fm, a late Palaeozoic foreland basin succession that crops out in the Frontal Cordillera (Argentinean Andes), contains lacustrine microbial carbonates and volcanic rocks. Modification by extensive pedogenic processes contributed to the massive aspect of the calcareous beds. Most of the volcanic deposits in the San Ignacio Fm consist of pyroclastic rocks and resedimented volcaniclastic deposits. Less frequent lava flows produced during effusive eruptions led to the generation of tabular layers of fine-grained, greenish or grey andesites, trachytes and dacites. Pyroclastic flow deposits correspond mainly to welded ignimbrites made up of former glassy pyroclasts devitrified to microcrystalline groundmass, scarce crystals of euhedral plagioclase, quartz and K-feldspar, opaque minerals, aggregates of fine-grained phyllosilicates and fiammes defining a bedding-parallel foliation generated by welding or diagenetic compaction. Widespread silicified and silica-permineralized plant remains and carbonate mud clasts are found, usually embedded within the ignimbrites. The carbonate sequences are underlain and overlain by volcanic rocks. The carbonate sequence bottoms are mostly gradational, while their tops are usually sharp. The lower part of the carbonate sequences is made up of mud which appear progressively, filling interstices in the top of the underlying volcanic rocks. They gradually become more abundant until they form the whole of the rock fabric. Carbonate on volcanic sandstones and pyroclastic deposits occur, with the nucleation of micritic carbonate and associated production of pyrite. Cyanobacteria, which formed the locus of mineral precipitation, were related with this nucleation. The growth of some of the algal mounds was halted by the progressive accumulation of volcanic ash particles, but in most cases the upper boundary is sharp and suddenly truncated by pyroclastic flows or volcanic avalanches. These pyroclastic flows partially destroyed the carbonate beds and palaeosols. Microbial carbonate clasts, silicified and silica-permineralized tree trunks, log stumps and other plant remains such as small branches and small roots inside pieces of wood (interpreted as fragments of nurse logs) are commonly found embedded within the ignimbrites. The study of the carbonate and volcanic rocks of the San Ignacio Fm allows the authors to propose a facies model that increases our understanding of lacustrine environments that developed in volcanic settings.     

北京西山东岭台组火山岩包裹体均一过程及研究意义

东岭盆地内岭台期火山活动有五个阶段，其中流纹质熔结凝灰岩很发育，单元流层特征变化明显。石英晶屑内熔融包裹体发育。本文研究了其均一过程，即包裹体净化现象、裂纹弥合、二次气泡的出现与消失、在某一温度间隔内气泡明显变小等现象。提出了气泡较大时常不能获得的均一温度，代表捕获时非均一相的看法。据包裹体固相探针分析资料投衅解释均一过程的成因，并给出了一种确定火山喷发前熔体中水含量的方法。     

Long-runout pyroclastic surge on a Cretaceous alluvial plain, Republic of Korea

Pyroclastic surge is a dilute and turbulent flow of volcanic gas and tephra that is commonly generated during explosive volcanic eruptions and can threaten lives along its flow paths. Assessing its travel distance and delineating future volcanic hazards have therefore been major concerns of volcanologists. Historical eruptions show that most pyroclastic surges travel a few tens of kilometres or less from their sources. Aeolian or aquagene processes have therefore been evoked for the emplacement of supposed surge deposits much beyond this distance. Here we show that a Cretaceous tuff bed in Korea was emplaced by an exceptionally powerful pyroclastic surge that flowed as far as the most powerful pyroclastic flows that formed the low-aspect-ratio ignimbrites (LARI). This has significant implications for interpreting ancient volcanic eruptions and delineating volcanic hazards by pyroclastic surges, and casts intriguing questions on the eruption dynamics and physics of long-runout pyroclastic surges and their distinction from LARI-forming pyroclastic flows.     

藏南早白垩世火山岩屑砂岩对印度大陆北缘火山事件的约束

藏南古错地区早白垩世以出现一套火山岩屑砂岩为特征。通过系统的岩石学、地球化学及物源区综合分析表明,砂岩中的火山岩岩屑来源于同期的印度大陆北缘的板内火山作用。侏罗纪晚期,砂岩物源来自于稳定的被动大陆边缘,早白垩世Barremian期砂岩物源来自于被动大陆边缘和火山弧的双重供应,随地层变新火山物质的输入逐渐增加,至Albian早期达到顶峰。随后,火山物质输入终止,砂岩基本消失,取而代之的是一套黑色页岩。古错砂岩物源区的变化反映了印度大陆北缘在早白垩世存在一次强烈的板内火山作用,可能与印度大陆与澳大利亚大陆、南极大陆的裂解有关。     

黑龙江省磨石山火山盆地滚子沟地区铀矿化特征及其地质意义

磨石山火山盆地位于宾县-伊春-甘欣（俄）火山岩型铀钼成矿带中部,为白垩纪中-小型火山盆地.盆地北部的滚子沟地区新发现一铀矿化异常区,矿化异常区内存在一条铀异常带及两处铀异常高值点.在综合该异常区地质和矿化特征基础上,结合区域大地构造背景、区域地层、侵入体和构造等地质特征,通过对滚子沟地区铀异常成矿条件和控矿因素的分析,认为该异常区内赋矿岩性为早白垩世宁远村组碎裂流纹岩,主体受到北北东向断裂控制,蚀变类型主要为硅化和赤铁矿化,具明显分带性.与区域产铀火山盆地对比分析显示,磨石山火山盆地具有更优越的成矿前景.可依据滚子沟地段归纳的铀矿化特征,在火山盆地内进行铀矿调查工作.     

寿宁-福州上侏罗统南园群叶蜡石矿地质特征

寿宁—福州一带蕴藏丰富的叶蜡石矿资源，多产于南园群火山碎屑岩地层中，小溪组地层为最主要赋矿层位，围绕火山机体发育的环状断裂为成矿最有利部位，近矿围岩普遍发育次生石英岩化，围岩蚀变具有明显的水平及垂直分带现象。     

甘肃山丹煤田二叠系火山碎屑岩的发现及其主要特征

本文论述了山丹煤田二叠系火山碎屑岩的地质特征:(1)火山碎屑岩赋存地层层位,(2)火山碎屑岩的岩石结构特征,(3)岩石的化学成分属性,(4)火山碎屑岩的粒度特征及其沉积性质。表明,火山碎屑岩由火山角砾岩及玻屑凝灰岩组成。凝灰质碎屑物为气携,以降落灰的方式沉积于陆相浅水环境中。该火山碎屑岩的发现表明,山丹地区二叠纪曾有过重要的火山活动,它为区域地质研究提供了有意义的新资料。