安徽铜陵岩浆岩中辉长质岩石包体的发现及其地质意义

在安徽铜陵白芒山、老庙基和小铜官山岩体中发现了3个辉长质岩石包体。报道了这些辉长质岩石包体及其寄主岩的岩相学观察以及矿物电子探针和全岩岩石化学、微量元素、稀土元素和锶钕同位素分析资料,总结了辉长质岩石包体的特征,讨论了它们的地质意义。该区辉长质岩石包体主要有两类。一类具“斑状”结构,“斑晶”主要是斜长石和角闪石。“基质”具微粒半自形一自形等粒状结构,主要矿物成分为斜长石和角闪石;另有少量黑云母,有时还有少量辉石。另一类具辉长结构,主要由辉石、斜长石、角闪石和黑云母组成。本区辉长质岩石包体低铝高镁和富碱,其Cr,Co和Ni的含量明显偏高,重稀土元素,特别是钇相对富集,(^87Sr／^86Sr)．为0．7063到0．7069,εNd(t)为-4．9～-8．8,与大陆裂谷碱性玄武岩的特征一致,表明本区此时属于拉张环境。研究还表明,铜陵地区不具“斑状”结构的辉长质岩石包体是由底侵的碱性玄武岩浆在约26km深处的深位岩浆房中直接冷凝结晶形成的。本区具“斑状”结构的辉长质岩石包体中的“斑晶”由闪长质岩浆在8～13km深处的中位岩浆房中发生结晶分异作用形成,而“基质”是在“斑晶”形成以后,由深位岩浆房中的中基性演化岩浆上侵到中位岩浆房,并围绕早期“斑晶”矿物结晶而形成。     

青藏高原东南缘腾冲后碰撞粗面安山岩形成的深部岩浆过程:来自辉长质物质的启示

位于青藏高原东南缘的腾冲火山区发育大量的后碰撞高钾钙碱性岩浆岩(8Ma至今),形成了近连续的玄武岩-玄武安山岩-粗面安山岩-英安岩系列。在晚更新世(0.3～0.4Ma)粗面安山岩中发现了大量的辉长岩包体与辉长质矿物聚晶。辉长岩包体分为两类:I类为辉长苏长岩(直径2～4cm),主要由斜长石(50%～60%)、单斜辉石(20%～30%)和斜方辉石(5%～10%)组成,矿物间呈高角度接触的开放结构并包含少量的基质玻璃; II类辉长岩包体(直径2～12cm)主要由斜长石(40%～50%)与单斜辉石(30%～40%)组成,含少量铁钛氧化物(5%～10%),矿物间见少量的基质玻璃与微晶斜方辉石(粒径50μm)。矿物聚晶(粒径2～5mm)由斜长石(40%～60%)、单斜辉石(20%～30%)和斜方辉石(5%～10%)组成,矿物间呈高角度接触的开放结构,其间贯入基质玻璃。辉长岩包体、矿物聚晶与寄主粗面安山岩斑晶具有相同的矿物组成(斜长石+单斜辉石+斜方辉石);单斜辉石具有相似的微量元素组成特征;辉长岩包体全岩主量元素成分落在玄武岩-玄武安山岩-粗面安山岩-英安岩的演化序列中,它们与寄主粗面安山岩具有一致的Sr-Nd-Pb同位素组成。上述观测结果表明,辉长岩包体和矿物聚晶与寄主岩浆同源,它们均来自粗面安山质岩浆房。矿物温度与压力计算结果表明,辉长岩包体与矿物聚晶的结晶温度低于斑晶,形成深度位于粗面安山质岩浆房的中上部。这些具有开放结构的矿物聚晶与辉长岩包体可能代表粗面安山质岩浆喷发前形成晶粥的"碎片":矿物聚晶与I类辉长岩包体矿物间基质含量较高,矿物成分与寄主粗面安山质熔体(全岩成分)平衡,可能代表寄主粗面安山质岩浆形成的晶粥; II类辉长岩包体矿物间紧密程度较高,矿物与较演化的岩浆平衡,可能代表早期较演化的岩浆形成的经历压实作用的晶粥。粗面安山质岩浆的快速上升将这些晶粥破碎并以辉长岩包体与矿物聚晶的方式运移至地表。岩浆房中基性岩浆的补给是导致安山质岩浆喷发的重要诱发机制。     

我国东南沿海新生代玄武岩中两类超镁铁岩包体的成因

我国东南沿海粤、闽、浙、苏、皖诸省广泛分布新生代玄武岩。本文目的在于,研究包裹于碱性玄武质岩石中的两类超镁铁岩深源包体的矿物岩石学和地球化学,进而讨论包体的起源和成因。这二类深源包体是:一,橄榄岩类包体,又称绿色包体,以尖晶石二辉橄榄岩为主,分布遍及全区,主要产地见表1脚注;兼有石榴石二辉橄榄岩,见于浙江巨县和福建明溪。二,辉石岩类包体,又称黑色包体,以二辉岩和单斜辉石岩为主,伴生辉长岩和角闪石岩,主要见于广东普宁麒麟。     

新疆塔城别斯托别苏长辉长岩的岩石学和锆石SHRIMP年代学研究

塔城市南约30km的别斯托别苏长辉长岩侵入石炭纪二长花岗岩中,二者的接触部位多被农田覆盖。二长花岗岩内部存在大量辉长岩、闪长岩、花岗闪长岩、石英闪长岩、石英斑岩等包体（但没有苏长辉长岩包体）。苏长辉长岩主要由透辉石-普通辉石、顽火辉石、基性斜长石（An：51 ~ 70）和少量钛铁矿-磁铁矿组成。从苏长辉长岩中分选出的锆石CL图像显示典型的扇形结构（锆石中存在辉石和斜长石包体）。对两个锆石样品进行的SHRIMP年代学研究得到平均年龄分别为：273.3 1.8Ma（MSWD = 1.18,n = 20）和272.5 2.8Ma（MSWD = 0.75,n = 12）。这两个年龄在误差范围内完全一致,表明别斯托别苏长辉长岩的形成时代为早二叠世晚期。在该苏长辉长岩与花岗岩接触带附近观察到的铜矿化现象为找矿勘探提供了方向。     

甘肃好梯超镁铁煌斑岩中深源包体及巨晶

本文对甘肃好梯超镁铁煌斑岩中上地幔包体和巨晶进行了详细研究,结果表明本区尖晶石二辉橄榄岩包体来自大约62km深处,而石榴石二辉橄榄岩来自约92km深处。后者在岩相学、矿物学方面表现出明显的地幔交代作用特征,表明石榴石二辉橄榄岩为与寄主煌斑岩有关的成因包体。另外本区两种单斜辉石巨晶和橄榄石巨晶为高压结晶作用的产物。     

平潭和漳州深成杂岩中斜长石捕虏晶与岩浆混合作用

在闽东南平潭和漳州火成杂岩中,广泛发育岩浆混合现象,表现为花岗质岩石中存在辉长－闪长质同深成岩墙和淬冷岩石包体。花岗质和闪长质岩石中普遍存在Ａｎ＞７０％的斜长石捕虏晶。这种成分的斜长石是辉长岩特有的,而不是任一种花岗岩的斑晶。在斜长石捕虏晶四周,都有与花岗岩中的斜长石成分相当的斜长石加生膜。斜长石捕虏晶可分为自形的、熔融状、筛孔状和碎片状等四类,它们各自形成于不同的动力环境     

内蒙古集宁新生代玄武岩中橄榄岩包体和巨晶的发现及意义

内蒙古集宁新生代玄武岩产于华北克拉通北缘，属于广义的“汉诺坝玄武岩”。首次在三义堂附近的碱性玄武岩中发现了大量的橄榄岩包体、辉石和长石以及少量的含钛磁铁矿巨晶。包体主要是尖晶石二辉橄榄岩，造岩矿物为橄榄石＋斜方辉石＋单斜辉石＋尖晶石，辉石巨晶主要为透辉石和普通辉石，长石巨晶主要是歪长石和少量斜长石。1．5GPa条件下，尖晶石二辉橄榄岩样品所记录的平衡温度与汉诺坝相近，集中于950℃左右，大体上反映了华北克拉通北缘大陆岩石圈地幔尖晶石相部分的温度状态。单斜辉石巨晶的结晶温压大于幔源包体的平衡温压，表明巨晶的来源深度可能大于包体。包体的结构及矿物成分分析表明，这些包体是玄武质岩浆上升过程中偶然捕获岩石圈地幔的岩石碎块。二辉橄榄岩包体中橄榄石高Mg#值（89．5～91．7）和较高的NiO含量（0．29％～0．55％），暗示集宁玄武岩中的橄榄岩包体来自较高熔融程度的岩石圈地幔。     

新疆塔尔巴哈台山发现早奥陶世蛇绿混杂岩

在我国境内塔尔巴哈台山下石炭统黑山头组泥岩、粉砂岩、凝灰岩和火山熔结角砾岩夹基性熔岩的底部识别出一套蛇绿混杂岩。火山角砾岩的角砾由蛇纹石化橄榄岩(蛇纹岩)、辉长岩、玄武质粗面安山岩、粗面岩和硅质岩组成。蛇绿混杂岩由蚀变辉长岩、蛇纹岩和硅质岩组成。橄榄岩虽然发生了强烈蛇纹岩化(现在为蛇纹岩),但蛇纹岩中保留了斜方辉石和橄榄石的假象。覆盖在该蛇绿岩套之上的火山角砾岩属于爆发性很强的火山喷发产物。巨大的粗粒辉长岩、玄武质粗面岩、粗面岩、硅质岩和蛇纹石化橄榄岩角砾被熔岩胶结,说明火山通道穿切了蛇绿岩套。蚀变辉长岩中的斜方辉石已经完全蛇纹石化(保留了斜方辉石假象),斜长石完全被水钙铝榴石交代(保留斜长石假象),但单斜辉石保存完好,且发育由尖晶石叶片(棒)构成的出溶结构。棕褐色的尖晶石出溶棒(或叶片)一般完全平行,个别情况下发现两组近于直交的尖晶石出溶棒。从蚀变辉长岩中分选出锆石,对其进行的 SHRIMP 年代学研究,结果表明辉长岩的形成时代为478.3±3.3Ma(MSWD=1.09,n=14)。这说明塔尔巴哈台蛇绿岩套岩石形成于早奥陶世。     

甘肃北山红柳沟基性-超基性岩体岩石成因及成矿条件

甘肃北山红柳沟基性-超基性岩体位于塔里木板块北缘北山裂谷带, 岩体侵位于敦煌岩群,主要岩石类型有辉长岩、橄榄辉长岩、橄榄苏长辉长岩、橄榄角闪苏长岩、橄榄辉长苏长岩、二辉橄榄岩、橄榄辉石岩和辉石岩等。橄榄石Fo介于66.97%~82.92%之间,属贵橄榄石,斜方辉石En成分范围为68.49~77.65,属古铜辉石;单斜辉石En成分范围为45.85~48.81,主要为斜顽辉石和透辉石;斜长石An为58.70~72.69,以拉长石为主;角闪石以普通角闪石为主。岩体母岩浆Mg^#值为0.59~0.62,属于高镁拉斑玄武质岩浆,岩浆演化过程中主要发生了橄榄石、斜方辉石、单斜辉石和斜长石的分离结晶作用,主要分离结晶矿物受单斜辉石和斜方辉石的控制,岩浆上升侵位过程中遭受到下地壳物质混染。从构造环境、母岩浆、岩体类型、岩浆分异程度、同化混染等方面综合分析认为红柳沟岩体具有形成铜镍硫化物矿床的较大潜力。     

广东麒麟新生代玄武质角砾岩筒中岩石包体的研究

本文以广东麒麟玄武质角砾岩筒中的各种岩石包体为研究对象,通过详细的岩石学研究,按岩石类型将包体划分为四类：即橄榄岩、辉石岩、辉长岩质麻粒岩、花岗岩和火山－沉积岩,并依据包体的岩石地球化学特征,讨论了它们的成因;其中辉长岩质麻粒岩是来自本区下地壳的样品,是由上地幔部分熔融产生的熔体“底侵”于地壳底部结晶,又经变质作用的产物。同时,本文结合实测的和计算的地球物理参数,讨论了该区的岩石圈分层。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.