天然地应力作用下不同产状岩体裂隙渗流特性研究

为了研究天然地应力作用下裂隙产状等因素对深部岩体裂隙渗流特性的影响,基于单裂隙面渗透性服从负指数变化规律,建立了三维应力作用下不同产状裂隙的渗透系数计算公式,利用Lagrange乘子法分析裂隙面产状变化对其渗透性的影响,并分析了岩体裂隙有、无充填物对其渗透性的影响及敏感性;然后,以我国大陆地区地应力统计规律为例,分析了地表以下5 000 m范围内在天然地应力作用下裂隙渗透性随深度、产状的变化规律。结果表明：裂隙产状的变化对其渗流特性有明显影响,对于浅层岩体,在大主应力大致呈水平方向分布时,随着裂隙面倾角的增加,裂隙渗透系数逐渐降低;但随着深度的增加,在裂隙深度超过约200 m和裂隙面走向与大或中主应力方向大致一致时,裂隙渗透性反而会随着裂隙面倾角的增加逐渐增加,在裂隙面走向与小主应力方向垂直时增加最为明显;对于深部岩体,裂隙的渗透性很小,裂隙面产状的变化对其渗透性影响很弱;对于有充填物裂隙,岩块与充填物的弹模比和充填物泊松比的变化对裂隙渗透性的影响很小。研究结果可为深入研究我国深部岩体渗透特性变化规律提供借鉴意义。     

胶东玲珑金矿田171号脉深部金矿床特征及构造控矿作用

玲珑金矿田171号脉赋存于招平断裂北段破头青断裂中,在其深部探明金资源储量150余吨,确定其为超大型破碎带蚀变岩型金矿床。为了揭示构造与成矿、深部矿与浅部矿、石英脉型矿与蚀变岩型矿等的关系,为深部找矿提供典型实例和理论依据,文章通过大量矿区地质勘探、野外地质调查和区域地质综合研究,剖析了矿床特征,揭示了构造控矿规律。171号金矿脉深部共有7个金矿体,均为盲矿体。其中,171_1号主矿体埋深120~1700m,呈似层状、大脉状分布,沿走向及倾向显舒缓波状。矿体总体走向60°,倾向SE,倾角36.5~43.5°。矿体长2500m,斜深510~3100 m,平均厚度4.23 m,平均金品位2.71×10~(-6),矿石主要为黄铁绢英岩型(蚀变岩型)。矿脉和矿体受断裂构造控制,矿化、构造、蚀变分带具有一致性。由控矿断裂的主裂面至远离主裂面,构造变形强度由强变弱,蚀变强度和矿化强度也由强变弱。招平断裂是一条切割早期韧性剪切带的脆性断裂,总体呈舒缓波状展布,大部分地段发育于早前寒武纪变质岩系与侏罗纪玲珑型花岗岩之间,断裂上盘脆性变形较弱,下盘脆性变形带宽大,是沿不同时代地质体之间发育的左行铲式正断层,类似于拆离断层,是胶东白垩纪伸展构造的组成部分。玲珑金矿田是典型的石英脉型金矿产地,但大型金矿床多为赋存于断裂构造中的蚀变岩型金矿床,石英脉型金矿床与蚀变岩型金矿床是同一构造系统中不同构造位置的产物;一般在主断裂中赋存蚀变岩型金矿床,在主断裂下盘的次级张裂隙中产出石英脉型金矿床。胶东以正断层为主的伸展构造系统为大规模成矿提供了有利条件,构造、蚀变分带和不同类型金矿床的关系是金矿找矿的重要标志。     

华北板块南缘的变形分解:洛南-栾川断裂带与秦岭北缘强变形带研究

秦岭洛南-栾川断裂带具有左旋斜向俯冲的运动学特征,其产状一般为107°/N∠65°。华南板块的俯冲方向为80°,俯冲角度为42°;华南板块运动方向为42°,运动方向与华北板块南部边界的夹角为65°,汇聚角25°。秦岭北缘强变形带内褶皱枢纽延伸方向为290°,与洛南-栾川断裂带存在15°的夹角。逆冲断层走向与褶皱的枢纽方向基本一致,大多数断层与洛南-栾川断裂带有相同的运动学极性,性质为左行平移逆断层。平移正断层走向主要为NE SW,断层性质、展布方向、运动学特征与板块汇聚的应力作用方式吻合;片理、片麻理走向117°,与洛南-栾川断裂带走向夹角为10°。在垂直剪切带的剖面上,系统观察岩石变形特征,测量面理产状,进行岩石有限应变测量,岩石非共轴递进变形分析结果表明:秦岭北缘强变形带内由南向北面理走向与剪切带走向的夹角逐渐增大,岩石剪应变量依次递减,造山带变形具有“三斜对称”特点。     

Determination of a spatial fracture network

Hydraulic and mechanical properties of rock masses are largely dependent upon the distribution and variation of fracture areas. Consequently, it is essential to develop good models for analysing the spatial geometric characteristics of fracture fields. The latter, however, may be ascertained only by measuring open cuts or boreholes. The most important factor from the analysis of areas is to be able to determine spatial networks. Without an exhaustive and expensive inventory, the classical methods involving measurements of dip and strike do not provide either a correct estimation of fracture orientations in space, or a good estimation of their distribution. At present, automatic analysis of linear traces on large plane areas is used by several authors^1,2 and the field strike and dip measurements are applied only for verification purposes. This method of computing spatial networks is especially suitable because of the nature of data so obtained, since it permits various simulations on computed networks. It is based upon classical methods of vector geometry that involve a measurements data matrix and provide a means of solving a double system of equations. Results are the directional spatial fracture densities. The object of this paper is to define the geometric parameters of this problem and the computation method, to present an example and, finally, to conclude with critical comments supported by certain proposals for a variety of applications.     

韩城地区煤岩力学特性与破坏特征试验

韩城地区二叠系下统的山西组煤岩为含裂隙的低强度高脆性介质,其抗压强度和破坏特性与加载方式和加载速率有密切的关系。利用室内试验方法,对该地区煤层气储层煤岩开展了不同加载方式的力学研究。试验结果表明,煤岩的主裂隙(面割理)走向与加载方向的关系对煤岩的力学特性有较大影响,煤岩裂隙走向与加载方向垂直时的抗压强度是裂隙走向与加载方向平行时抗压强度的1.35倍;而弹性模量和泊松比正好相反,煤岩裂隙走向与加载方向平行时的弹性模量是裂隙走向与加载方向垂直时弹性模量的1.66倍,泊松比为1.15倍;在同等试验条件下,随着加载速率的增大,煤岩强度提高,但脆性增大,易呈脆性破坏。研究成果可为裂隙型煤岩的力学特性认识及在工程中的应用提供参考。      

井下超声波成像提取岩层节理产状信息

井下超声波电视能够提取工程勘察中岩层产状信息并完成井眼岩层3维（3D）信息图。在某地下石油储备库的工程勘察中,完成7口井的超声波电视成像测井,以其中的钻孔ZK10为例,研究并分析了井下超声波电视成像所获取的结构面倾角和倾向、岩体完整性、结构面线密度、3D岩心图和井壁图以及节理极坐标图、节理方位频率图。统计分析结果表明：井下超声波电视技术可以对钻孔所揭露的岩体质量进行初级定量化分析,为区域稳定分析、工程岩体质量分级及工程设计提供有价值的基础数据,对提高工程勘察质量具有重要意义。     

Active normal faulting during the 1997 seismic sequence in Colfiorito,Umbria: Did slip propagate to the surface?

In order to determine whether slip during an earthquake on the 26th September 1997 propagated to the surface, structural data have been collected along a bedrock fault scarp in Umbria, Italy. These collected data are used to investigate the relationship between the throw associated with a debated surface rupture (observed as a pale unweathered stripe at the base of the bedrock fault scarp) and the strike, dip and slip-vector. Previous studies have suggested that the surface rupture was produced either by primary surface slip or secondary compaction of hangingwall sediments. Some authors favour the latter because sparse surface fault dip measurements do not match nodal plane dips at depth. It is demonstrated herein that the strike, dip and height of the surface rupture, represented by a pale unweathered stripe at the base of the bedrock scarp, shows a systematic relationship with respect to the geometry and kinematics of faulting in the bedrock. The strike and dip co-vary and the throw is greatest where the strike is oblique to the slip-vector azimuth where the highest dip values are recorded. This implies that the throw values vary to accommodate spatial variation in the strike and dip of the fault across fault plane corrugations, a feature that is predicted by theory describing conservation of strain along faults, but not by compaction. Furthermore, published earthquake locations and reported fault dips are consistent with the analysed surface scarps when natural variation for surface dips and uncertainty for nodal plane dips at depth are taken into account. This implies that the fresh stripe is indeed a primary coseismic surface rupture whose slip is connected to the seismogenic fault at depth. We discuss how this knowledge of the locations and geometry of the active faults can be used as an input for seismic hazard assessment.     

大倾角煤层水力裂缝扩展物理模拟实验

为研究大倾角煤层水力压裂裂缝扩展形态，采用大尺寸真三轴压裂模拟系统，分别开展最大水平主应力沿地层走向和沿地层倾向的60°倾角煤层水力裂缝扩展物理模拟实验。结果表明:最大主应力方向沿地层走向时，裂缝起裂容易，缝高受限，裂缝连通性好，裂缝的开启主要沿层理和天然裂缝，形成垂直缝形态，地层倾角对压裂施工影响相对较小，建议进行大规模压裂以充分改造煤储层；最大主应力方向沿地层倾向时，裂缝起裂困难，前期缝高受限，后期缝高失控，裂缝连通性差，受节理影响，不易形成主缝，所以裂缝扩展困难，转向及多级破裂较多，此类煤层建议进行多级小规模压裂改造。实验结果对新疆等地区大倾角煤层的改造模式和改造规模具有指导作用。      

冻结饱水单裂隙岩体力学特性试验研究

通过相似单裂隙岩体冻结三轴试验,研究裂隙倾角、迹长、隙宽、围压和温度对单裂隙岩体力学特性的影响,试验结果表明：裂隙岩体力学参数与倾角呈二次函数分布,与迹长呈指数函数分布,通过拟合式（3）可近似计算岩体强度;岩体强度与围压呈线性分布,负温条件下泊松比和弹性模量受围压影响较小;隙宽小于0.1 mm或大于0.8 mm时,岩体强度随隙宽增大而减小,隙宽在0.1～0.8 mm之间时,岩体力学参数几乎不受隙宽影响;岩体强度随温度降低而增大的作用机制是岩体孔隙水和裂隙水冻结成冰,增大了颗粒间的凝聚力和摩擦角;裂隙倾角影响破裂面的起始位置,迹长影响破裂面的扩展规模,围压影响破裂面的延伸方向;倾角对岩体强度影响最大,迹长次之,温度影响最小。     

基于CT-CA的天然裂隙岩石受拉破坏特性研究

岩石内部存在的裂隙、孔洞等天然损伤对岩石的力学性能和破坏过程有重要影响,依据细胞自动机理论结合CT无损识别技术实现了含天然裂隙岩石在劈裂条件下裂纹扩展和贯通全过程及其力学性能变化规律的研究。从裂隙砂岩的真实细观结构出发,构建了天然裂隙岩石的数值计算模型,运用CASRock数值计算软件完成了含不同裂隙倾角的砂岩劈裂破坏的数值试验,分析了裂隙倾角对砂岩的力学特性、裂纹扩展过程及能量演化的影响规律。研究表明：(1)天然裂隙砂岩的抗拉强度与裂隙倾角密切相关,随着裂隙倾角的增加,其抗拉强度呈现先减小后增加的趋势;(2)裂隙起裂于天然裂隙尖端,当裂隙倾角0°≤θ<48°时,岩样的破坏是由错开型裂纹引起,裂纹沿着与天然裂隙近垂直方向扩展;当裂隙倾角48°≤θ<94°时,岩样的破坏是由张开型裂纹引起,裂纹沿着与天然裂隙近平行方向扩展;(3)劈裂过程中裂纹尖端应力场存在拉应力区和压应力区,拉应力造成翼裂纹由天然裂隙尖端沿加载端方向萌生扩展,而压应力则引发次生裂纹沿天然裂隙方向扩展;(4)含天然裂隙砂岩劈裂破坏过程能量演化可划分为4个阶段,随裂隙倾角的增大,峰值点处的总能量密度、弹性能密度先缓...     

Fracture and stress orientation from borehole image logs: A case study from Cambay basin,India

The Deccan trap basalt, laid down by multiple lava flows during upper Cretaceous to Paleocene times forms the basement of current study in Cambay basin. As such, there is great interest and value in fracture detection and evaluation of fractured basement reservoirs in the Cambay basin. The procedure for identification and evaluation of natural as well as induced fractures in basaltic basement of the Cambay basin is presented in this work. In this study formation micro-imager (FMI) and extended range micro-imager (XRMI) log data for fracture identification is used. The Deccan trap basaltic basement of the study area, comprising five wells in the Tarapur-Cambay block, has potential for holding commercial hydrocarbon due to the presence of fractures and weathered basement. Both image logs (FMI, XRMI) identify three types of fracture including open (conductive), partially open and closed (resistive) fractures, of which open and partially open fractures are important for hydrocarbon accumulation. Fracture dip ranges from 10° to 80°. Image logs have also identified washout, breakout and drilling-induced fracture zones. The strike direction of the open natural fractures for four wells varies from N60°E to N30°E whereas the strike direction of most natural fracture in the fifth well is oriented towards N20°W. The orientations of drilling-induced fractures and breakouts may be interpreted for the in-situ stress direction over the logged interval. Drilling-induced tensile fractures, identified over the depth interval of 1969–1972 m, and borehole breakouts over the interval of 1953–1955 m in one well, suggest an orientation of maximum in-situ horizontal compressive stress (S_H) lies in the north-south direction. The azimuths of open natural fractures in the same well vary from north-south to N30°E. It is expected that the direction of fluid flow will be controlled by open natural fractures and therefore would be in a direction parallel to the S_H direction, which is orthogonal to the minimum horizontal stress (S_h) direction. The orientations observed are consistent with the present day S_H direction in the study area of Cambay basin.     

Breakage assessment through cluster analysis of joint set orientations of exposed benches of opencast mines

Summary This paper substantiates, through three different case studies, that the breakage assessment of opencast bench blasting can be made scientifically through the analysis of joint set orientations of different exposed benches in association with the corresponding face direction. Joint orientations, dip and strike of bedding planes have a significant influence on rock breakage. They can have decelerating effects on blasting performance, which may be rectified by geological mapping, and subsequently modifying the blast design parameters.     

Measuring fracture orientation at exposed rock faces by using a non-reflector total station

Measurements of fracture orientation are usually taken by using a compass-inclinometer device on exposed rock faces. The drawbacks when using this method is that it is time-consuming if many fractures are measured and that measurement might be impossible if the rock face cannot be safely reached physically. To improve field mapping of rock fractures, a method for applying a non-reflector total station to measuring fracture orientation is presented in this paper. A non-reflector total station is a geodetic device that captures three-dimensional co-ordinates of target points without using a reflector. Therefore, physical touching the rock surfaces is no longer required. To determine a fracture orientation, co-ordinates of a set of points on the exposed fracture surface are captured at a distance from the rock face. The best-fit plane of the exposed fracture surface is defined by the co-ordinates of the target points, and the orientation (e.g. dip angle and dip direction) of the fracture surface is determined as that of its best-fit plane. This paper presents the technical procedure and a portable system designed for the field mapping of fracture orientation. Results of a case study performed at an exposed rock face are also included.     

江西德兴铜厂斑岩铜矿床细脉型矿体含矿裂隙系统研究

江西德兴铜厂铜矿是中国东部最大的斑岩型铜矿床,该矿床主要由成矿岩体内带的浸染状矿体和外带的细脉型矿体组成,对于该矿床控制细脉型矿体就位及展布的控矿构造研究甚少。文章通过对露天采场和钻孔岩芯含矿裂隙特征的调查,结合前人对含矿脉体产状的统计资料,重新厘定了含矿裂隙系统,构建了控矿构造模型。研究结果显示,德兴铜厂铜矿床细脉型矿体的含矿裂隙走向整体上是围绕北西向拉长的梨形状成矿岩体周边呈放射状展布;同一部位含矿构造具有走向相近、中等倾角、双倾向和正断运动的特征,构成剖面X-型共轭剪裂隙组合。这些含矿裂隙形成于成矿岩体侵位时期,形成时最大主压应力近直立,中间主应力近水平且垂直成矿岩体边界,最小主应力近水平且平行于成矿岩体边界。铜厂铜矿床的控矿构造是长轴呈北西向展布的成矿花岗闪长岩的岩体侵入构造体系。进一步找矿方向是在矿区范围的北西向成矿岩体南东、北西两端存在隐伏岩脊部位的深部寻找细脉型隐伏矿体,在矿田、矿集区范围是寻找隐伏成矿岩体发育的部位。     

Determination of Geometrical and Structural Representative Volume Elements at the Baihetan Dam Site

A case study at the Baihetan dam site was undertaken to obtain a representative volume element (RVE) size. Two-dimensional fracture information in an exploration tunnel was used to generate a large three-dimensional fracture network. By dividing the entire modeled rock mass into cubes, the volumetric fracture density (P₃₂) value of each cube was determined. The size effect can be determined by changing the cube size. The RVE was determined using P₃₂ calculation and statistical tests, including Kolmogorov-Smirnov (KS) and Wilcoxon rank-sum tests. The P₃₂ value depends on the geometrical parameters of fracture density and size; in this study, this value is called the geometrical RVE. P₃₂ is dependent on fracture density and size, and cannot appropriately reflect certain data such as fracture dip or dip angle. Therefore, we propose a structural RVE (SRVE) considering fracture dip direction, dip angle, density, and size, which together constitute the available information about the fracture network. Therefore, the SRVE is more applicable for use in solving geological problems than the RVE. In this analysis, the KS and Wilcoxon rank-sum tests were used to determine the SRVE size.     

小角度成层倾斜场地动力响应分析的大型振动台试验研究

基于大型振动台试验,研究小角度成层倾斜场地在倾向、走向、垂向、坡面方向、坡面垂直方向上的地震动响应特征,以及地层倾角对场地反应谱的影响规律。试验结果表明：在倾向方向,随着地层倾角的增大,倾斜场地的放大效应增大;在走向方向,当地层倾角小于12.5°时,放大效应强于水平成层场地;在倾向、走向方向,当地层倾角达到12.5°时,场地对反应谱短周期T≤0.1 s部分具有放大作用,对T＞0.1 s的部分具有削弱作用;在垂向方向,随着地层倾角的增加,倾斜场地的放大效应强于水平成层场地;在坡面方向,倾斜场地的放大效应弱于水平成层场地;在坡面垂向方向,倾斜场地的放大效应强于水平成层场地。该研究成果对小角度成层倾斜场地上的建筑物抗震设计具有一定的参考意义。     

反倾层状岩体斜坡弯曲-拉裂两种失稳破坏之判据探讨

对反倾层状岩体斜坡弯曲-拉裂的失稳破坏判据,已有研究分别基于两种力学模型进行推导,即竖直压杆弹性屈曲稳定和平直梁弯折破坏模型,但对层间错动阻力及挠度产生附加弯矩等因素未加以考虑,不尽合理。在反倾斜坡岩层受力分析基础上,建立考虑了板侧层间错动阻力的下端嵌固、上端自由的斜置等厚弹性悬臂板梁模型,统一地通过瑞利-里兹能量方法,推导了弹性屈曲临界条件和嵌固端弯折破坏临界条件。实例计算及讨论表明,弹性屈曲判据适用于陡立岩层;而中-陡反倾岩层应主要为弯折破坏,但层间的力学性质对弯折临界判据值具有较大影响。     

顺层岩质边坡开挖模型试验及稳定性影响因素分析

用地质力学模型试验方法,对顺层岩质边坡进行开挖破坏试验。同时在有限元分析的基础上,采用多层结构模型对顺层岩质路堑边坡稳定性的影响因素进行了分析。指出当边坡走向与岩层走向夹角超过30后,边坡发生顺层滑动破坏的可能性很小,基本上可不视为顺层边坡。同时也阐明了岩层倾角以及结构面抗剪强度对顺层岩质边坡稳定性的影响。文中结论可为顺层岩质边坡的科研、设计和施工提供参考。     

2008年汶川地震破裂的滑移向量

估计同震滑移向量对于认识和理解破裂方式和破裂过程具有重要意义。2008年汶川大地震在青藏高原东缘龙门山推覆构造带的中央断裂和前山断裂上各形成了一条长250 km和72 km的地表破裂带。地震发生后至今,已经发表了大量有关同震位错沿破裂带分布的论文和报告,但绝大部分都仅仅是破裂的走向位错和垂直位错,极少有同震滑移向量的报道。这不仅是因为野外难以直接测量到水平缩短量(或拉张量),而且还因为这些走滑位错实际上是视走滑位错,部分或全部来自水平缩短或拉张。因此,仅仅根据视走滑同震位错和垂直同震位错估计的同震总滑移量肯定包含了相当大的误差。尝试利用据不同走向参考线测量到的一组(两个以上)视走滑位错来计算水平滑移向量的这一新方法,获得了中央破裂带上的7个水平同震滑移向量,并结合垂直位错量进一步计算了走滑、倾滑和水平缩短三个同震滑移分量以及断层倾角和破裂面上的同震滑移向量,综合出露破裂面的擦痕所指示的滑移向量,并对比根据矩张量解获得的震源深度的滑移向量,得出以下认识:(1)破裂南段的地表滑移向量的方位角明显小于震源深度滑移向量的方位角,表明在破裂从震源向地表传播过程中破裂面上的滑移向量发生了逆时针旋转;(2)滑移方位角向北东方向逐渐增大,表明地平面上水平滑移向量表现出顺时针旋转的趋势,而且在破裂向北东方向传播过程中近地表的走滑分量逐渐减小而倾滑分量逐渐增大;(3)几乎在每一个观测点倾滑分量都大于走滑分量,表明汶川地震的破裂方式在任何地点都是以逆冲运动为主;(4)破裂面倾角在10.4°～64.7°,平均值为41°,与天然破裂露头和探槽揭示的结果基本一致;(5)滑移向量沿破裂带的分布显示,走滑分量中段大而两端小,倾滑分量则相反,中段小两端大。     

古人利用节理面开凿遂昌唐代金矿巷道的发现及论证

在对遂昌金矿唐代古金矿4号古洞的考察中,发现分布在矿中的巷道两侧的围岩都是坚硬的变质岩。通过现场研究,作者有4点发现:（1）发现发育于围岩中的节理面具有密度大、倾角陡和间距小的特点;（2）古巷道轴线的走向与节理面的走向基本一致;（3）古巷道的横截面被古人设计成高宽比很大的洞形;（4）巷道的走向都被设计成某种弧形。据此,可以作出以下判断:在一千多年前的唐代,古人很可能已发现这些发育于围岩中的陡倾角节理面之间的结合力很低,使用铁凿就可撬下来,并据此来开挖古巷道的。这也表明唐代的古人已经掌握了相当多的地质知识,并能够将之成功地应用于工程实践中。