频谱代换无拉伸动校正方法研究

动校正拉伸是地震资料处理的一个基本问题,解决拉伸问题的处理方法是切除.现代地震数据大多为长排列采集,动校正拉伸更为严重.依据褶积模型和Fourier变换的基本性质,本文给出频谱代换无拉伸动校正方法.算法实现就是将CMP道集变换到频率域,取参考道的相位谱替换其它偏移距道的相位,同时保持其振幅谱不变,再做Fourier反变换就得到动校正后的地震剖面.通过其实现过程可知该方法不需要地下介质的速度信息,算法可完全自动实现,且具有较高的计算效率.频谱代换无拉伸动校正可适用于任何偏移距的地震资料,而且还可有效保持地震资料的AVO效应.理论模拟数据及其叠加结果显示频谱代换法的有效性和实用性,同时该方法具有较强的抗随机噪音能力.     

无拉伸动校正技术在近海工程地震勘探中的应用

动校正是地震资料处理的关键内容之一,直接关系到地震资料处理结果的精度.在浅层和大偏移距情况下,常规动校正使波形发生拉伸畸变,波形拉长、频带向低频方向移动,进而影响叠加效果.通常地震资料处理中大都采用切除的方法克服动校正拉伸畸变的影响,这对目的层较深时是可取的.以工程地质调查为目的的海洋地震勘探旨在了解海底之下较浅地层深度范围内的地质信息,一般勘探区水深较浅,数据叠加道数较少,如果仍然采取切除处理,势必严重影响资料的分辨率和准确度.本文阐述了一种无拉伸动校正方法,能较好地解决动校正后的波形畸变问题,理论模型和实际资料的处理结果表明该方法在近海浅层工程地震勘探中是行之有效的,有助于提高速度分析的精度和地震资料的分辨率.     

Constant normal-moveout (CNMO) correction: a technique and test results

We introduce a processing technique which minimizes the 'stretching effects' of conventional NMO correction. Unlike conventional NMO, the technique implies constant normal moveout (CNMO) for a finite time interval of a seismic trace. The benefits of the proposed method include preservation of higher frequencies and reduction of spectral distortions at far offsets. The need for severe muting after the correction is reduced, allowing longer spreads for stack, velocity and AVO analysis. The proposed technique has been tested on model and real data. The method may improve the resolution of CMP stack and AVO attribute analysis. The only assumptions for this stretch-free NMO correction are (i) all time samples of a digital reflected wavelet at a particular offset have the same normal moveout, and (ii) reflection records have an interference nature.     

抛物线Radon变换方法在压制地震多次波中的应用

多次波的存在会降低地震资料的信噪比,影响地震资料处理效果和后续的地质解释精度,压制多次波干扰是地震资料处理中的一个重要环节。利用有限差分方法正演模拟几个典型地质模型的地震波场,之后进行动校正,再通过抛物线Radon变换方法把t-x域一次反射波和多次波变换到τ-q域,由于存在速度的差异,Radon域记录中的一次反射波和多次波的能量互相分开,在Radon域对多次波的能量切除,保留反射波的有效信息,达到压制多次波的效果,提高资料的信噪比。通过对实际地震数据进行抛物线Radon变换结果也进一步验证了该方法在压制多次波中的应用效果。      

共转换点道集S变换谱相似性的多波地震数据横波波场提取技术

横波速度动校正后的共转换点(CCP)道集内,同时刻的各道横波信号S变换(ST)谱与其叠加道ST谱具有相似关系.因此,可基于这种相似关系设计自适应滤波器来提取多波地震数据中的横波波场.首先对共中心点(CMP)道集应用纵波速度动校正并在各道减去叠加道来去除数据中的纵波波场;然后在CCP道集应用横波速度动校正,将地震道振幅水平调整至叠加道振幅水平并做S变换,以叠加道ST谱为参考对地震道ST谱进行自适应滤波,去除数据中的残余纵波和噪声;最后,将滤波结果的振幅水平恢复至滤波前振幅水平.理论和实际数据试算表明,本文方法可有效提取多波地震数据中的横波波场,为多波多分量横波数据处理提供新思路.     

Characterization of dipping fractures in a transverselyisotropic background

Although it is believed that natural fracture sets predominantly have near‐vertical orientation, oblique stresses and some other mechanisms may tilt fractures away from the vertical. Here, we examine an effective medium produced by a single system of obliquely dipping rotationally invariant fractures embedded in a transversely isotropic with a vertical symmetry axis (VTI) background rock. This model is monoclinic with a vertical symmetry plane that coincides with the dip plane of the fractures. Multicomponent seismic data acquired over such a medium possess several distinct features that make it possible to estimate the fracture orientation. For example, the vertically propagating fast shear wave (and the fast converted PS‐wave) is typically polarized in the direction of the fracture strike. The normal‐moveout (NMO) ellipses of horizontal reflection events are co‐orientated with the dip and strike directions of the fractures, which provides an independent estimate of the fracture azimuth. However, the polarization vector of the slow shear wave at vertical incidence does not lie in the horizontal plane – an unusual phenomenon that can be used to evaluate fracture dip. Also, for oblique fractures the shear‐wave splitting coefficient at vertical incidence becomes dependent on fracture infill (saturation). A complete medium‐characterization procedure includes estimating the fracture compliances and orientation (dip and azimuth), as well as the Thomsen parameters of the VTI background. We demonstrate that both the fracture and background parameters can be obtained from multicomponent wide‐azimuth data using the vertical velocities and NMO ellipses of PP‐waves and two split SS‐waves (or the traveltimes of PS‐waves) reflected from horizontal interfaces. Numerical tests corroborate the accuracy and stability of the inversion algorithm based on the exact expressions for the vertical and NMO velocities.     

Seismic characterization of vertical fractures described as general linear-slip interfaces

Fluid flow in many hydrocarbon reservoirs is controlled by aligned fractures which make the medium anisotropic on the scale of seismic wavelength. Applying the linear‐slip theory, we investigate seismic signatures of the effective medium produced by a single set of ‘general’ vertical fractures embedded in a purely isotropic host rock. The generality of our fracture model means the allowance for coupling between the normal (to the fracture plane) stress and the tangential jump in displacement (and vice versa). Despite its low (triclinic) symmetry, the medium is described by just nine independent effective parameters and possesses several distinct features which help to identify the physical model and estimate the fracture compliances and background velocities. For example, the polarization vector of the vertically propagating fast shear wave S₁ and the semi‐major axis of the S₁‐wave normal‐moveout (NMO) ellipse from a horizontal reflector always point in the direction of the fracture strike. Moreover, for the S₁‐wave both the vertical velocity and the NMO velocity along the fractures are equal to the shear‐wave velocity in the host rock. Analysis of seismic signatures in the limit of small fracture weaknesses allows us to select the input data needed for unambiguous fracture characterization. The fracture and background parameters can be estimated using the NMO ellipses from horizontal reflectors and vertical velocities of P‐waves and two split S‐waves, combined with a portion of the P‐wave slowness surface reconstructed from multi‐azimuth walkaway vertical seismic profiling (VSP) data. The stability of the parameter‐estimation procedure is verified by performing non‐linear inversion based on the exact equations.     

A SIMPLE EFFICIENT METHOD OF DIP-MOVEOUT CORRECTION1

Much of the success of modern seismic data processing derives from the use of the stacking process. Unfortunately, as is well known, conventional normal moveout correction (NMO) introduces mispositioning of data, and hence mis-stacking, when dip is present. Dip moveout correction (DMO) is a technique that converts non-zero-offset seismic data after NMO to true zero-offset locations and reflection times, irrespective of dip. The combination of NMO and DMO followed by post-stack time migration is equivalent to, but can be implemented much more efficiently than, full time migration before stack. In this paper we consider the frequency-wavenumber DMO algorithm developed by Hale. Our analysis centres on the result that, for a given dip, the combination of NMO at migration velocity and DMO is equivalent to NMO at the appropriate, dip-dependent, stacking velocity. This perspective on DMO leads to computationally efficient methods for applying Hale DMO and also provides interesting insights on the nature of both DMO and conventional stacking.     

Kirchhoff型偏移反偏移串联地震数据炮检距转换技术

零炮检距数据在海洋地震资料处理中有很多优势和用途,然而,受海洋水平拖缆地震采集作业方式的限制,接收数据的最小炮检距一般在200 m左右,小于该炮检距的数据是无法直接获得的.通常的做法是通过对较大炮检距数据进行动校,通过外推来变相获得零炮检距（包括小炮检距）数据,其外推的精度会受到地震资料信噪比、动校正速度的精度等因素影响,并且保幅性较差.本文通过一种基于Kirchhoff真振幅偏移和反偏移串联的技术,在反偏移过程中改变观测系统,有效实现了大炮检距反射地震数据向零炮检距（包括小炮检距）数据之间的转换,且很好地保持了零炮检距（包括小炮检距）数据的振幅特性.同时,经偏移-反偏移串联处理后,有效压制了地震数据中的随机噪声,地震资料信噪比和成像精度均得到显著提高.     

鄂尔多斯盆地北部低信噪比资料的高分辨率处理

鄂尔多斯盆地北部地区地震地质条件复杂,造成原始地震资料信噪比低,分辨率低,前期的地震资料储层与含气性预测的成果达不到目前勘探开发的要求.本文针对鄂尔多斯盆地北部低信噪比地震资料的特点,提出了一套适合本区的高分辨率处理方法,通过解决静校正和去噪问题,应用反褶积、精细速度分析以及高精度动校正和叠加等处理技术,在保证信噪比的前提下,提高了地震资料的分辨率.     

VTI介质长偏移距非双曲动校正公式优化

常规Alkhalifah动校正公式精度低,不能精确描述各向异性介质长偏移距地震反射同相轴的时距关系.本文以提高VTI介质长偏移距地震资料动校正公式的精度为目标,在分析VTI介质常规动校正方程的基础上,根据误差最小原理建立优化校正系数图版,实现对常规动校正公式大偏移距误差的修正,建立最优化校正Alkhalifah动校正方程,实现了对VTI介质长偏移距地震资料常规动校正方程的改进.之后由Fomel群速度公式导出高精度VTI模型长偏移距时距函数,提出了高精度VTI介质长偏移距地震资料动校正方程.将以上的动校正方程用于各向异性参数反演,模型计算表明最优化校正Alkhalifah动校正方程的反演精度是常规长偏移距动校正方程反演精度的2～4倍,高精度动校正方程的反演精度是常规动校正方程反演精度的2～8倍.     

Seismic attenuation,normal moveout stretch,and low‐frequency shadows underlying bottom simulating reflector events

In many cases, the seismic response of bottom‐simulating reflectors is characterised by low frequencies called “low‐frequency shadow”. Generally, this phenomenon is interpreted as attenuation due to partial saturation with free gas. Actually, this frequency loss may have multiple causes, with a normal moveout stretch as a possible candidate. To analyse this phenomenon, we compute synthetic seismograms by assuming a lossy bottom‐simulating layer, with varying quality factor and thickness, bounded by the upper hydrate‐brine/gas‐brine and lower gas‐brine/brine interfaces. First, we estimate the shift of the centroid frequency of the power spectrum as a function of the travelled distance of the seismic pulse. Then, we perform one‐dimensional numerical experiments to quantify the loss of frequency of the seismic event below the bottom‐simulating reflector as a function of the quality factor of the bottom‐simulating layer and its thickness (due to wave interference). Then, we compute shot gathers to obtain the stacked section, with and without the normal moveout stretch correction and with and without the presence of wave attenuation in the bottom‐simulating layer. The results indicate that the low‐frequency shadow due to the normal moveout stretch is stronger than that due to attenuation and may constitute a false indicator of the presence of gas. In fact, often, the low‐frequency shadow overlies events with higher frequencies, in contradiction with the physics of wave propagation. This is particularly evident when the low‐frequency shadow is so extensive that the presence of high frequencies below cannot be justified by the acquisition geometry.     

Wide-angle linear forward modelling of synthetic seismograms

We address the issue of linearity and scale dependence in forward modelling of seismic data from well logs, for large ray parameters, wide angles or large offsets. We present a forward model, within the context of seismic‐to‐well matching, that is linearized in the elastic properties of the earth. This model preserves linearity at large ray parameters and can handle fine‐layering effects such as induced anisotropy. Starting from a low‐contrast small‐ray‐parameter model, we extend it to a large‐ray‐parameter model by fully linearizing the elastic‐property contrasts. Overall linearity of the forward model is extended by partitioning the compressional‐wave and shear‐wave velocity fields into two fundamental scales: a kinematic scale that governs wavefield propagation effects and a dynamic scale that governs wavefield scattering effects. This analysis reveals that the standard practice in forward modelling of strongly filtering the ratio of compressional‐wave velocity to shear‐wave velocity is well founded in the underlying physics. The partitioning of the velocity fields also leads naturally to forward modelling that accounts fully for stretch effects, to resolution of the angle‐of‐incidence versus ray‐parameter dichotomy in seismic‐amplitude analysis, and to full accounting for induced anisotropy and dispersion effects due to fine‐layering of isotropic media. With the onset of routine long‐offset acquisition and the compelling need to optimize asset management in order to maximize reserve recovery, this forward model recognizes the physics of seismic wave propagation and enables a more complete exploitation of amplitude information in pre‐critical seismic data.     

遗传算法在地球物理中的应用进展

简要介绍了遗传算法的基本原理及实现步骤；论述了遗传算法在地震数据处理中的AVO波、速度参数、静校正，波阻抗等方面的应用状况；概述了该方法在重力、电法、测井及磁力等非地震勘探的研究进展；最后讨论了遗传算法的优缺点，对遗传算法的发展及其在地球物理勘探中的进一步应用作了展望。     

Non‐uniqueness with refraction inversion – the Mt Bulga shear zone

The tau‐p inversion algorithm is widely employed to generate starting models with many computer programs that implement refraction tomography. However, this algorithm can frequently fail to detect even major lateral variations in seismic velocities, such as a 50 m wide shear zone, which is the subject of this study. By contrast, the shear zone is successfully defined with the inversion algorithms of the generalized reciprocal method. The shear zone is confirmed with a 2D analysis of the head wave amplitudes, a spectral analysis of the refraction convolution section and with numerous closely spaced orthogonal seismic profiles recorded for a later 3D refraction investigation. Further improvements in resolution, which facilitate the recognition of additional zones with moderate reductions in seismic velocity, are achieved with a novel application of the Hilbert transform to the refractor velocity analysis algorithm. However, the improved resolution also requires the use of a lower average vertical seismic velocity, which accommodates a velocity reversal in the weathering. The lower seismic velocity is derived with the generalized reciprocal method, whereas most refraction tomography programs assume vertical velocity gradients as the default. Although all of the tomograms are consistent with the traveltime data, the resolution of each tomogram is comparable only with that of the starting model. Therefore, it is essential to employ inversion algorithms that can generate detailed starting models, where detailed lateral resolution is the objective. Non‐uniqueness can often be readily resolved with head wave amplitudes, attribute processing of the refraction convolution section and additional seismic traverses, prior to the acquisition of any borehole data. It is concluded that, unless specific measures are taken to address non‐uniqueness, the production of a single refraction tomogram that fits the traveltime data to sufficient accuracy does not necessarily demonstrate that the result is either correct, or even the most probable.     

Double plane‐wave reverse‐time migration

We develop a new time‐domain reverse‐time migration method called double plane‐wave reverse‐time migration that uses plane‐wave transformed gathers. Original shot gathers with appropriate data acquisition geometry are double slant stacked into the double plane‐wave domain with minimal slant stacking artefacts. The range of plane‐wave components needed for migration can be determined by estimating the maximum time dips present in shot gathers. This reduces the total number of input traces for migration and increases migration efficiency. Unlike the pre‐stack shot‐profile reverse‐time migration where the number of forward propagations is proportional to the number of shots, the number of forward propagations needed for the proposed method remains constant and is relatively small even for large seismic datasets. Therefore, the proposed method can improve the efficiency of the migration and be suitable for migrating large datasets. Double plane‐wave reverse‐time migration can be performed for selected plane‐wave components to obtain subsurface interfaces with different dips, which makes the migration method target oriented. This feature also makes the method a useful tool for migration velocity analysis. For example, we are able to promptly obtain trial images with nearly horizontal interfaces and adjust velocity models according to common image gathers. Seismic signal coming from steeply dipping interfaces can be included into the migration to build images with more detailed structures and higher spatial resolution as better velocity models become available. Illumination compensation imaging conditions for the proposed method are also introduced to obtain images with balanced amplitudes.     

How rough sea affects marine seismic data and deghosting procedures

Most seismic processing algorithms generally consider the sea surface as a flat reflector. However, acquisition of marine seismic data often takes place in weather conditions where this approximation is inaccurate. The distortion in the seismic wavelet introduced by the rough sea may influence (for example) deghosting results, as deghosting operators are typically recursive and sensitive to the changes in the seismic signal. In this paper, we study the effect of sea surface roughness on conventional (5–160 Hz) and ultra‐high‐resolution (200–3500 Hz) single‐component towed‐streamer data. To this end, we numerically simulate reflections from a rough sea surface using the Kirchhoff approximation. Our modelling demonstrates that for conventional seismic frequency band sea roughness can distort results of standard one‐dimensional and two‐dimensional deterministic deghosting. To mitigate this effect, we introduce regularisation and optimisation based on the minimum‐energy criterion and show that this improves the processing output significantly. Analysis of ultra‐high‐resolution field data in conjunction with modelling shows that even relatively calm sea state (i.e., 15 cm wave height) introduces significant changes in the seismic signal for ultra‐high‐frequency band. These changes in amplitude and arrival time may degrade the results of deghosting. Using the field dataset, we show how the minimum‐energy optimisation of deghosting parameters improves the processing result.     

Strategies for stable attenuation compensation in reverse‐time migration

Attenuation in seismic wave propagation is a common cause for poor illumination of subsurface structures. Attempts to compensate for amplitude loss in seismic images by amplifying the wavefield may boost high‐frequency components, such as noise, and create undesirable imaging artefacts. In this paper, rather than amplifying the wavefield directly, we develop a stable compensation operator using stable division. The operator relies on a constant‐Q wave equation with decoupled fractional Laplacians and compensates for the full attenuation phenomena by performing wave extrapolation twice. This leads to two new imaging conditions to compensate for attenuation in reverse‐time migration. A time‐dependent imaging condition is derived by applying Q‐compensation in the frequency domain, whereas a time‐independent imaging condition is formed in the image space by calculating image normalisation weights. We demonstrate the feasibility and robustness of the proposed methods using three synthetic examples. We found that the proposed methods are capable of properly compensating for attenuation without amplifying high‐frequency noise in the data.     

Propagation characteristics of converted refracted wave and its application in static correction of converted wave

Three-component seismic exploration through P-wave source and three-component geophone is an effective technique used in complicated reservoir exploration. In three-component seismic exploration data processing,one of the difficulties is static correction of converted wave. This paper analyzes propagation characteristics of non-converted and converted refracted waves,and discovers a favor-able condition for the formation of converted refracted wave,i.e. the velocity of overlaying medium S wave is much lower than that of underlying medium S wave. In addition,the paper proposes the static correction method of converted wave based on PPS converted refracted wave,and processes the real three-component seismic data with better results of static correction of converted wave.     

基于波动方程的上下缆地震数据鬼波压制方法研究

本文发展基于波动方程的上下缆鬼波压制方法,推导了上下缆地震波场频率波数域波动方程延拓合并公式.基于Fourier变换的波场解析延拓确保上下缆资料振幅相位的一致性,消除了长拖缆远偏移距信号的计算误差,同时具有较高的计算效率;上下缆地震波场的波动方程法合并有效解偶鬼波干涉,实现综合利用上下缆地震数据压制鬼波.理论模型数据和实际采集地震数据的测试表明了方法的有效性.