Segmentation and Morphotectonic Variations Along a Super Slow-Spreading Center: The Southwest Indian Ridge (57° E-70° E)

Bathymetric data along the Southwest Indian Ridge (SWIR) between 57°E and 70° E have been used to analyze the characteristics of thesegmentation and the morphotectonic variations along this ridge. Higheraxial volcanic ridges on the SWIR than on the central Mid-Atlantic Ridge(MAR) indicate that the lithosphere beneath the SWIR axis that supportsthese volcanic ridges, is thicker than the lithosphere beneath the MAR. Astronger/thicker lithosphere allows less along-axis melt flow andenhances the large crustal thickness variations due to 3D mantle upwellings.Magmatic processes beneath the SWIR are more focused, producing segmentsthat are shorter (30 km mean length) with higher along-axis relief (1200 mmean amplitude) than on the MAR. The dramatic variations in the length andamplitude of the swells (8–50 km and 500–2300 m respectively),the height of axial volcanic ridges (200–1400 m) and the number ofvolcanoes (5–58) between the different types of segments identifiedon the SWIR presumably reflect large differences in the volume, focusing andtemporal continuity of magmatic upwelling beneath the axis. To the east ofMelville fracture zone (60°42 E), the spreading center isdeeper, the bathymetric undulation of the axial-valley floor is less regularand the number of volcanoes is much lower than to the west. The spreadingsegments are also shorter and have higher along-axis amplitudes than to thewest of Melville fracture zone where segments are morphologically similar tothose observed on the central MAR. The lower magmatic activity together withshorter and higher segments suggest colder mantle temperatures withgenerally reduced and more focused magma supply in the deepest part of thesurvey area between 60°42 E and 70° E. The non-transformdiscontinuities show offsets as large as 70 km and orientations up toN36° E as compared to the N0° E spreading direction. We suggest thatin regions of low or sporadic melt generation, the lithosphere neardiscontinuities is laterally heterogeneous and mechanically unable tosustain focused strike-slip deformation.     

Variations of backscatter strength along the super slow-spreading Southwest Indian Ridge between 57°E and 70°E

Simrad EM12 backscatter strength data of the Southwest Indian Ridge (SWIR), between 57°E and 70°E, are used to reveal the along-axis segmentation of this super slow-spreading ridge. The backscatter properties of different geologic domains, like bathymetric highs and oblique basins within the rift valley, are characterized using 66 small test sites. We show that backscatter strength is higher on bathymetric swells, corresponding to segment centres, and lower in deep oblique basins corresponding to axial non-transform discontinuities and fracture zones. This contrast between segment centres and discontinuities is produced by both a thicker sediment cover and less frequent volcanic eruptions at segment ends. Using the model of Mitchell (1993), sediments have been estimated to be 2 to 5 m thicker in these areas than at segment centres. The distribution of the seamounts within the rift valley is controlling the long-wavelength variations of the mean backscatter strength calculated along the axis. Lower densities of seamounts and thicker sediments are producing lower and heterogeneous reflectivity levels in the deepest part of the axial valley floor between 61°45′E and 63°45′E. We propose that cooler mantle temperatures inducing construction of fewer volcanoes occur beneath this part of the ridge. The mean backscatter strength along the SWIR axis decreases dramatically toward the Rodrigues Triple Junction suggesting that volcanic production is reduced between 68°20′E and 69°20′E and that the transition from amagmatic tectonic deformation at the triple junction to new seafloor spreading occurs between 69°20′E and 70°E.     

Structure and Stability of Non-Transform Discontinuities on the Mid-Atlantic Ridge between 24° N and 30° N

Observations of the median valley within the 24–30° N area ofthe Mid-Atlantic Ridge (MAR), using the IOSDL high resolutionside-scan sonar instrument TOBI, image four separate areas of themedian valley, containing part or all of nine spreading segments, and fivenon-transform discontinuities between spreading segments (NTDs).These high resolution side scan images were interpreted in parallel withmultibeam bathymetry (Purdy et al., 1990), giving a greater degree ofstructural precision than is possible with the multibeam data alone. Threedistinct types of NTD were identified, corresponding in part to typespreviously identified from the multibeam bathymetric survey of the area.Type 1 NTDs are termed septal offsets, and are marked by a topographic ridgeseparating the two spreading segments. The offset between the spreadingsegments ranges from 9 to 14 km. These can be further subdivided into Type1A in which the septa run parallel to the overall trend of the MAR and Type1B in which the septa lie at a high angle to the bulk ridge trend. Type 1ANTDs are characterised by overlap of the neovolcanic zones of the segmentson each side, and strong offaxis traces, while Type 1B NTDs show no overlapof neovolcanic zones, and weak offaxis traces. Type 2 NTDs arebrittle/ductile extensional shear zones, marked by oblique extensionalfractures, and associated with rotation of tectonic and volcanic structuresaway from the overall trend of the MAR. Type 3 NTDs are associated withoffsets of less than 5 km, and show no sign of any accommodating structure.In this type of NTD, the offset zone is covered with undeformed volcanics.The type of NTD developed at any locality along the ridge axis appears todepend on the amount of segment offset and segment overlap, the overalltrend of the mid-ocean ridge, the width of the zone of discontinuity, themedian valley offset and the longevity of the offset. These factorsinfluence the mechanical properties of the lithosphere across thediscontinuity, and ultimately the tectonic style of the NTD that can besupported. Thus brittle/ductile extensional shear zones are long-livedstructures favoured by large segment offsets, and small or negative segmentoverlaps. Septa can be short or long lived, and are associated with largesegment offsets. Segment overlaps vary from negative (an along axis gap) tozero, for Type 1B septal offsets, or positive to zero for Type 1A septaloffsets. Non-tectonised NTDs are generally short lived structures,characterised by small segment offsets and zero or positive overlaps.     

Morphology and tectonics of the Australian-Antarctic Discordance between 123° E and 128° E

The Australian-Antarctic Discordance (AAD) is an anomalously deep and rugged zone of the Southeast Indian Ridge (SEIR) between 120° E and 128° E. The AAD contains the boundary between the Indian Ocean and Pacific Ocean isotopic provinces. We have analyzed SeaMarc II bathymetric and sidescan sonar data along the SEIR between 123° E and 128° E. The spreading center in the AAD, previously known to be divided into several transform-bounded sections, is further segmented by nontransform discontinuities which separate distinct spreading cells. Near the transform which bounds the AAD to the east, there is a marked change in the morphology of the spreading center, as well as in virtually every measured geochemical parameter. The spreading axis within the Discordance lies in a prominent rift valley similar to that observed along the Mid-Atlantic Ridge, although the full spreading rate within the AAD is somewhat faster than that of slow-spreading centers (~ 74 mm a^–1 vs. 0–40 mm a^–1). The AAD rift valleys show a marked contrast with the axial high that characterizes the SEIR east of the AAD. This change in axial morphology is coincident with a large (~ 1 km) deepening of the spreading axis. The segmentation characteristics of the AAD are analogous to those of the slow-spreading Mid-Atlantic Ridge, as opposed to the SEIR east of the AAD, which exhibits segmentation characteristics typical of fast-spreading centers. Thus, the spreading center within and east of the AAD contains much of the range of global variability in accretionary processes, yet it is a region free from spreading rate variations and the volumetric and chemical influences of hotspots. We suggest that the axial morphology and segmentation characteristics of the AAD spreading centers are the result of the presence of cooler than normal mantle. The presence of a cool mantle and the subsequent diminution of magma supply at a constant spreading rate may engender the creation of anomalously thick brittle lithosphere within the AAD, a condition which favor, the creation of an axial rift valley and of thin oceanic crust, in agreement with petrologic studies. The morphologies of transform and non-transform discontinuities within the Discordance also possess characteristics consistent with the creation of anomalously thick lithosphere in the region. The upper mantle viscosity structure which results from lower mantle temperatures and melt production rates may account for the similarity in segmentation characteristics between the AAD and slow-spreading centers. The section of the AAD which overlies the isotopic boundary is associated with chaotic seafloor which may be caused by an erratic pattern of magmatism and/or complex deformation associated with mantle convergence. Finally, the pattern of abyssal hill terrain within a portion of the AAD supports previous models for the formation of abyssal hills at intermediate- and slow-spreading ridges, and provides insights into how asymmetric spreading is achieved in this region.     

Structural analysis of the segmentation of the Central Indian Ridge between 20°30′S and 25°30′S (Rodriguez Triple Junction)

The morphological characteristics of the segmentation of the Central Indian Ridge (CIR) from the Indian Ocean Triple Junction (25°30S) to the Egeria Transform Fault system (20°30S) are analyzed. The compilation of Sea Beam data from R/VSonne cruises SO43 and SO52, and R/VCharcot cruises Rodriguez 1 and 2 provides an almost continuous bathymetric coverage of a 450-km-long section of the ridge axis. The bathymetric data are combined with a GLORIA side-scan sonar swath to visualize the fabric of the ridge and complement the coverage in some areas. This section of the CIR has a full spreading rate of about 50 mm yr^–1, increasing slightly from north to south. The morphology of the CIR is generally similar to that of a slow-spreading center, despite an intermediate spreading rate at these latitudes. The axis is marked by an axial valley 5–35 km wide and 500–1800 m deep, sometimes exhibiting a 100–600 m-high neovolcanic ridge. It is offset by only one 40km offset transform fault (at 22°40S), and by nine second-order discontinuities, with offsets varying from 4 to 21 km, separating segments 28 to 85 km long. The bathymetry analysis and an empirical orthogonal function analysis performed on across-axis profiles reveal morphologic variations in the axis and the second-order discontinuities. The ridge axis deepens and the relief across the axial valley increases from north to south. The discontinuities observed south of 22°S all have morphologies similar to those of the slow-spreading Mid-Atlantic Ridge. North of 22°S, two discontinuities have map geometries that have not been observed previously on slow-spreading ridges. The axial valleys overlap, and their tips curve toward the adjacent segment. The overlap distance is 2 to 4 times greater than the offset. Based on these characteristics, these discontinuities resemble overlapping spreading centers (OSCs) described on the fast-spreading EPR. The evolution of one such discontinuity appears to decapitate a nearby segment, as observed for the evolution of some OSCs on the EPR. These morphological variations of the CIR axis may be explained by an increase in the crustal thickness in the north of the study area relative to the Triple Junction area. Variations in crustal thickness could be related to a broad bathymetric anomaly centered at 19°S, 65°E, which probably reflects the effect of the nearby Réunion hotspot, or an anomaly in the composition of the mantle beneath the ridge near 19°S. Other explanations for the morphological variations include the termination of the CIR at the Rodriguez Triple Junction or the kinematic evolution of the triple junction and its resultant lengthening of the CIR. These latter effects are more likely to account for the axial morphology near the Triple Junction than for the long-wavelength morphological variation.     

Morphology and crustal structure of a small transform fault along the Mid-Atlantic Ridge: The Atlantis Fracture Zone

The Atlantis Fracture Zone (30° N) is one of the smallest transform faults along the Mid-Atlantic Ridge with a spatial offset of 70 km and an age offset of ~ 6 Ma. The morphology of the Atlantis Fracture Zone is typical of that of slow-slipping transforms. The transform valley is 15–20 km wide and 2–4 km deep. The locus of strike-slip deformation is confined to a narrow band a few kilometers wide. Terrain created at the outside corners of the transform is characterized by ridges which curve toward the ridge-transform intersections and depressions which resemble nodal basins. Hooked ridges are not observed on the transform side of the ridge-transform intersections. Results of the three-dimensional inversion of the surface magnetic field over our survey area suggest that accretionary processes are sufficiently organized within 3–4 km of the transform fault to produce lineated magnetic anomalies. The magnetization solution further documents a 15-km, westward relocation of the axis of accretion immediately south of the transform about 0.25 Ma ago. The Atlantis Transform is associated with a band of high mantle Bouguer anomalies, suggesting the presence of high densities in the crust and/or mantle along the transform, or anomalously thin crust beneath the transform. Assuming that all the mantle Bouguer anomalies are due to crustal thickness variations, we calculate that the crust may be 2–3 km thinner than a reference 6-km thickness beneath the transform valley, and 2–3 km thicker beneath the mid-points of the spreading segments which bound the transform. Our results indicate that crustal thinning is not uniform along the strike of the fracture zone. Based on studies of the state of compensation of the transform, we conclude that the depth anomaly associated with the fracture zone valley is not compensated everywhere by thin crust. Instead, the regional relationship between bathymetry and gravity is best explained by compensation with an elastic plate with an effective thickness of ~ 4 km or greater. However, the remaining isostatic anomalies indicate that there are large variations away from this simple model which are likely due to variations in crustal thickness and density near the transform.     

Segmentation and morphotectonic variations along a slow-spreading center: The Mid-Atlantic Ridge (24°00′ N– 30°40′ N)

Analysis of Sea Beam bathymetry along the Mid-Atlantic Ridge between 24°00 N and 30°40 N reveals the nature and scale of the segmentation of this slow-spreading center. Except for the Atlantis Transform, there are no transform offsets along this 800-km-long portion of the plate boundary. Instead, the Mid-Atlantic Ridge is offset at intervals of 10–100 km by nontransform discontinuities, usually located at local depth maxima along the rift valley. At these discontinuities, the horizontal shear between offset ridge segments is not accommodated by a narrow, sustained transform-zone. Non-transform discontinuities along the MAR can be classified according to their morphology, which is partly controlled by the distance between the offset neovolcanic zones, and their spatial and temporal stability. Some of the non-transform discontinuities are associated with off-axis basins which integrate spatially to form discordant zones on the flanks of the spreading center. These basins may be the fossil equivalents of the terminal lows which flank the neovolcanic zone at the ends of each segment. The off-axis traces, which do not lie along small circles about the pole of opening of the two plates, reflect the migration of the discontinuities along the spreading center.The spectrum of rift valley morphologies ranges from a narrow, deep, hourglass-shaped valley to a wide valley bounded by low-relief rift mountains. A simple classification of segment morphology involves two types of segments. Long and narrow segments are found preferentially on top of the long-wavelength, along-axis bathymetric high between the Kane and Atlantis Transforms. These segments are associated with circular mantle Bouguer anomalies which are consistent with focused mantle upwelling beneath the segment mid-points. Wide, U-shaped segments in cross-section are preferentially found in the deep part of the long-wavelength, along-axis depth profile. These segments do not appear to be associated with circular mantle Bouguer anomalies, indicating perhaps a more complex pattern of mantle upwelling and/or crustal structure. Thus, the long-recognized bimodal distribution of segment morphology may be associated with different patterns of mantle upwelling and/or crustal structure. We propose that the range of observed, first-order variations in segment morphology reflects differences in the flow pattern, volume and temporal continuity of magmatic upwelling at the segment scale. However, despite large first-order differences, all segments display similar intra-segment, morphotectonic variations. We postulate that the intra-segment variability represents differences in the relative importance of volcanism and tectonism along strike away from a zone of enhanced magma upwelling within each segment. The contribution of volcanism to the morphology will be more important near the shallowest portion of the rift valley within each segment, beneath which we postulate that upwelling of magma is enhanced, than beneath the ends of the segment. Conversely, the contribution of tectonic extension to the morphology will become more important toward the spreading center discontinuities. Variations in magmatic budget along the strike of a segment will result in along-axis variations in crustal structure. Segment mid-points may coincide with regions of highest melt production and thick crust, and non-transform discontinuities with regions of lowest melt production and thin crust. This hypothesis is consistent with available seismic and gravity data.The rift valley of the Mid-Atlantic Ridge is in general an asymmetric feature. Near segment mid-points, the rift valley is usually symmetric but, away from the segment mid-points, one side of the rift valley often consists of a steep, faulted slope while the other side forms a more gradual ramp. These observations suggest that half-grabens, rather than full-grabens, are the fundamental building blocks of the rift valley. They also indicate that the pattern of faulting varies along strike at the segment scale, and may be a consequence of the three-dimensional, thermo-mechanical structure of segments associated with enhanced mantle upwelling beneath their mid-points.     

The morphology and tectonics of the Mark area from Sea Beam and Sea MARC I observations (Mid-Atlantic Ridge 23° N)

High-resolution Sea Beam bathymetry and Sea MARC I side scan sonar data have been obtained in the MARK area, a 100-km-long portion of the Mid-Atlantic Ridge rift valley south of the Kane Fracture Zone. These data reveal a surprisingly complex rift valley structure that is composed of two distinct spreading cells which overlap to create a small, zero-offset transform or discordant zone. The northern spreading cell consists of a magmatically robust, active ridge segment 40–50 km in length that extends from the eastern Kane ridge-transform intersection south to about 23°12′ N. The rift valley in this area is dominated by a large constructional volcanic ridge that creates 200–500 m of relief and is associated with high-temperature hydrothermal activity. The southern spreading cell is characterized by a NNE-trending band of small (50–200 m high), conical volcanos that are built upon relatively old, fissured and sediment-covered lavas, and which in some cases are themselves fissured and faulted. This cell appears to be in a predominantly extensional phase with only small, isolated eruptions. These two spreading cells overlap in an anomalous zone between 23°05′ N and 23°17′ N that lacks a well-developed rift valley or neovolcanic zone, and may represent a slow-spreading ridge analogue to the overlapping spreading centers found at the East Pacific Rise. Despite the complexity of the MARK area, volcanic and tectonic activity appears to be confined to the 10–17 km wide rift valley floor. Block faulting along near-vertical, small-offset normal faults, accompanied by minor amounts of back-tilting (generally less than 5°), begins within a few km of the ridge axis and is largely completed by the time the crust is transported up into the rift valley walls. Features that appear to be constructional volcanic ridges formed in the median valley are preserved largely intact in the rift mountains. Mass-wasting and gullying of scarp faces, and sedimentation which buries low-relief seafloor features, are the major geological processes occurring outside of the rift valley. The morphological and structural heterogeneity within the MARK rift valley and in the flanking rift mountains documented in this study are largely the product of two spreading cells that evolve independently to the interplay between extensional tectonism and episodic variations in magma production rates.     

A Survey of the Southwest Indian Ridge Axis Between Atlantis II Fracture Zone and the Indian Ocean Triple Junction: Regional Setting and Large Scale Segmentation

The study of very low-spreading ridges has become essential to ourunderstanding of the mid-oceanic ridge processes. The Southwest Indian Ridge(SWIR) , a major plate boundary of the world oceans, separating Africa fromAntarctica for more than 100 Ma, has such an ultra slow-spreadingrate. Its other characteristic is the fast lengthening of its axis at bothBouvet and Rodrigues triple junctions. A survey was carried out in thespring of 1993 to complete a multibeam bathymetric coverage of the axisbetween Atlantis II Fracture Zone (57° E) and the Rodrigues triplejunction (70° E). After a review of what is known about the geometry,structure and evolution of the SWIR, we present an analysis of the newalong-axis bathymetric data together with previously acquiredacross-axis profiles. Only three transform faults, represented byAtlantis II FZ, Novara FZ, and Melville FZ, offset this more than 1000 kmlong section of the SWIR, showing that the offsets are more generallyaccommodated by ridge obliquity and non-transform discontinuities. From comparison of the axial geometry, bathymetry, mantle Bouguer anomaly and central magnetic anomaly, three large sections (east of Melville FZ, between Melville FZ and about 65°30 E, and from there to the Rodrigues triple junction) can be distinguished. The central member, east of Melville FZ, does not resemble any other known mid-oceanic ridge section: the classical signs of the accretion (mantle Bouguer anomaly, central magnetic anomaly) are only observed over three very narrow and shallow axis sections. We also apply image processing techniques to the satellite gravity anomaly map of Smith and Sandwell (1995) to determine the off-axis characteristics of the Southwest Indian Ridge domain, more especially the location of the triple junction and discontinuities traces. We conclude that the large-scale segmentation of the axis has been inherited from the evolution of the Rodrigues triple junction.     

Tectonics of ridge-transform intersections at the Kane fracture zone

The Kane Transform offsets spreading-center segments of the Mid-Atlantic Ridge by about 150 km at 24° N latitude. In terms of its first-order morphological, geological, and geophysical characteristics it appears to be typical of long-offset (>100 km), slow-slipping (2 cm yr^-1) ridge-ridge transform faults. High-resolution geological observations were made from deep-towed ANGUS photographs and the manned submersible ALVIN at the ridge-transform intersections and indicate similar relationships in these two regions. These data indicate that over a distance of about 20 km as the spreading axes approach the fracture zone, the two flanks of each ridge axis behave in very different ways. Along the flanks that intersect the active transform zone the rift valley floor deepens and the surface expression of volcanism becomes increasingly narrow and eventually absent at the intersection where only a sediment-covered ‘nodal basin’ exists. The adjacent median valley walls have structural trends that are oblique to both the ridge and the transform and have as much as 4 km of relief. These are tectonically active regions that have only a thin (<200 m), highly fractured, and discontinuous carapace of volcanic rocks overlying a variably deformed and metamorphosed assemblage of gabbroic rocks. Overprinting relationships reveal a complex history of crustal extension and rapid vertical uplift. In contrast, the opposing flanks of the ridge axes, that intersect the non-transform zones appear to be similar in many respects to those examined elsewhere along slow-spreading ridges. In general, a near-axial horst and graben terrain floored by relatively young volcanics passes laterally into median valley walls with a simple block-faulted character where only volcanic rocks have been found. Along strike toward the fracture zone, the youngest volcanics form linear constructional volcanic ridges that transect the entire width of the fracture zone valley. These volcanics are continuous with the older-looking, slightly faulted volcanic terrain that floors the non-transform fracture zone valleys. These observations document the asymmetric nature of seafloor spreading near ridge-transform intersections. An important implication is that the crust and lithosphere across different portions of the fracture zone will have different geological characteristics. Across the active transform zone two lithosphere plate edges formed at ridge-transform corners are faulted against one another. In the non-transform zones a relatively younger section of lithosphere that formed at a ridge-non-transform corner is welded to an older, deformed section that initially formed at a ridge-transform corner.     

Evolution of the Axial Geometry of the Southwest Indian Ocean Ridge between the Melville Fracture Zone and the Indian Ocean Triple Junction – Implications for Segmentation on Very Slow-Spreading Ridges

Geophysical data from 900 km of the Southwest Indian Ridge are used todescribe the pattern of evolution of the plate boundary between 61° Eand 70° E over the past 20 million years. The SWIR is anobliquely-opening, ultra slow-spreading axis, and east of61° E comprises a series of ridge sections, each about 100–120 kmin length. The orientation of these sections varies fromsub-orthogonal to oblique to the approximately N–S spreadingdirection. In general, the suborthogonal sections are shallower, commonlysubdivided into an array of discrete axial segments, and carry recognisablecentral magnetic anomalies. The majority of the oblique sections are single,continuous rifts without continuous axial magnetic signatures.Morphotectonics of the Southwest Indian Ridge crust have not previously beenwell constrained off-axis, and we here present sidescan sonar andswath bathymetric data up to 100 km from the ridge to demonstrate the complexities of its spatial and temporal evolution.A model is proposed that the segmentation style correlates with analong-axis variation between: (a) relatively thick crustal sections which overlie mantle sections with higher magmatic supply created in orthogonally-spreading segments and (b) those oblique sections associated with cooler, magmatically-starved mantle and thinner crust. These latter sections are formed at broad offset zones in theplate boundary, more precisely defined on faster-spreading ridges asnontransform discontinuities. The nonsystematic pattern of crustalconstruction, extensional basin formation and the absence of extension-parallel traces of discontinuities off-axis suggest that the oblique spreading sections are not fixed in space or time.     

Variations in axial processes on the Mid-Atlantic Ridge: The median valley of the MARK area

Submersible observations and photogeology document dramatic variations in the distribution of young volcanic rocks, faulting, fissuring, and hydrothermal activity along an 80 km-long segment of the Mid-Atlantic Ridge south of the Kane Transform (MARK Area). These variations define two spreading cells separated by a cell boundary zone or a small-offset transform zone. The northern spreading cell is characterized by a median ‘neovolcanic’ ridge which runs down the axis of the median valley floor for 40 km. This edifice is as much as 4 km wide and 600 m high and is composed of very lightly sedimented basalts inferred to be < 5000 years old. It is the largest single volcanic constructional feature discovered to date on the Mid-Atlantic Ridge. The active Snake Pit hydrothermal vent field is on the crest of this ridge and implies the presence of a magma chamber in the northern spreading cell. In contrast, the southern cell is characterized by small, individual volcanos similar in size to the central volcanos in the FAMOUS area. Two of the volcanos that were sampled appear to be composed of dominantly glassy basaltic rocks with very light sediment cover; whereas, other volcanos in this region appear to be older features. The boundary zone between the two spreading cells is intensely faulted and lacks young volcanic rocks. This area may also contain a small-offset ( < 8 km) transform zone. Magmatism in the northern cell has been episodic and tens of thousands of years have lapsed since the last major magmatic event there. In the southern cell, a more continuous style of volcanic accretion appears to be operative. The style of spreading in the southern cell may be much more typical for the Mid-Atlantic Ridge than that of the northern cell because the latter is adjacent to the 150 km-offset Kane Transform that may act as a thermal sink along the MAR. Such large transforms are not common on the MAR, therefore, lithosphere produced in a spreading cell influenced by a large transform may also be somewhat atypical.     

The Vema Transverse Ridge (Central Atlantic)

Transverse ridges are elongate reliefs running parallel and adjacent to transform/fracture zones offsetting mid-ocean ridges. A major transverse ridge runs adjacent to the Vema transform (Central Atlantic), that offsets the Mid-Atlantic Ridge by 320 km. Multibeam morphobathymetric coverage of the entire Vema Transverse ridge shows it is an elongated (300 km), narrow (<30 km at the base) relief that constitutes a topographic anomaly rising up to 4 km above the predicted thermal contraction level. Morphology and lithology suggest that the Vema Transverse ridge is an uplifted sliver of oceanic lithosphere. Topographic and lithological asymmetry indicate that the transverse ridge was formed by flexure of a lithospheric sliver, uncoupled on its northern side by the transform fault. The transverse ridge can be subdivided in segments bound by topographic discontinuities that are probably fault-controlled, suggesting some differential uplift and/or tilting of the different segments. Two of the segments are capped by shallow water carbonate platforms, that formed about 3–4 m.y. ago, at which time the crust of the transverse ridge was close to sea level. Sampling by submersible and dredging indicates that a relatively undisturbed section of oceanic lithosphere is exposed on the northern slope of the transverse ridge. Preliminary studies of mantle-derived ultramafic rocks from this section suggest temporal variations in mantle composition. An inactive fracture zone scarp (Lema fracture zone) was mapped south of the Vema Transverse ridge. Based on morphology, a fossil RTI was identified about 80 km west of the presently active RTI, suggesting that a ridge jump might have occurred about 2.2 m.a. Most probable causes for the formation of the Vema Transverse ridge are vertical motions of lithospheric slivers due to small changes in the direction of spreading of the plates bordering the Vema Fracture Zone.     

Accretionary processes in the axial valley of the Mid-Atlantic Ridge 27° N–30° N from TOBI side-scan sonar images

We analyse TOBI side-scan sonar images collected during Charles Darwin cruise CD76 in the axial valley of the Mid-Atlantic Ridge (MAR) between 27°N and 30°N (Atlantis Transform Fault). Mosaics of the two side-scan sonar swaths provide a continuous image of the axial valley and the inner valley walls along more than six second-order segments of the MAR. Tectonic and volcanic analyses reveal a high-degree intra-segment and inter-segment variability. We distinguish three types of volcanic morphologies: hummocky volcanoes or volcanic ridges, smooth, flat-topped volcanoes, and lava flows. We observe that the variations in the tectonics from one segment to another are associated with variations in the distribution of the volcanic morphologies. Some segments have more smooth volcanoes near their ends and in the discontinuities than near their mid-point, and large, hummocky axial volcanic ridges. Their tectonic deformation is usually limited to the edges of the axial valley near the inner valley walls. Other segments have smooth volcanoes distributed along their length, small axial volcanic ridges, and their axial valley floor is affected by numerous faults and fissures. We propose a model of volcano-tectonic cycles in which smooth volcanoes and lava flows are built during phases of high magmatic flux. Hummocky volcanic ridges are constructed more progressively, by extraction of magma from pockets located preferentially beneath the centre of the segments, during phases of low magma input. These cycles might result from pulses in melt migration from the mantle. Melt arrival would lead to the rapid emplacement of smooth-textured volcanic terrains, and would leave magma pockets, mostly beneath the centre of the segments where most melt is produced. During the end of the volcanic cycle magma would be extracted from these reservoirs through dikes with a low magma pressure, building hummocky volcanic ridges at low effusion rates. In extreme cases, this volcanic phase would be followed by amagmatic extension until a new magma pulse arrives from the mantle.     

The East Pacific Rise and its flanks 8–18° N: History of segmentation,propagation and spreading direction based on SeaMARC II and Sea Beam studies

SeaMARC II and Sea Beam bathymetric data are combined to create a chart of the East Pacific Rise (EPR) from 8°N to 18°N reaching at least 1 Ma onto the rise flanks in most places. Based on these data as well as SeaMARC II side scan sonar mosaics we offer the following observations and conclusions. The EPR is segmented by ridge axis discontinuities such that the average segment lengths in the area are 360 km for first-order segments, 140 km for second-order segments, 52 km for third-order segments, and 13 km for fourth-order segments. All three first-order discontinuities are transform faults. Where the rise axis is a bathymetric high, second-order discontinuities are overlapping spreading centers (OSCs), usually with a distinctive 3:1 overlap to offset ratio. The off-axis discordant zones created by the OSCs are V-shaped in plan view indicating along axis migration at rates of 40–100 mm yr^–1. The discordant zones consist of discrete abandoned ridge tips and overlap basins within a broad wake of anomalously deep bathymetry and high crustal magnetization. The discordant zones indicate that OSCs have commenced at different times and have migrated in different directions. This rules out any linkage between OSCs and a hot spot reference frame. The spacing of abandoned ridges indicates a recurrence interval for ridge abandonment of 20,000–200,000 yrs for OSCs with an average interval of approximately 100,000 yrs. Where the rise axis is a bathymetric low, the only second-order discontinuity mapped is a right-stepping jog in the axial rift valley. The discordant zone consists of a V-shaped wake of elongated deeps and interlocking ridges, similar to the wakes of second-order discontinuities on slow-spreading ridges. At the second-order segment level, long segments tend to lengthen at the expense of neighboring shorter segments. This can be understood if segments can be approximated by cracks, because the propagation force at a crack tip is directly proportional to crack length.There has been a counter-clockwise change in the direction of spreading on the EPR between 8 and 18° N during the last 1 Ma. The cumulative change has been 3°–6°, producing opening across the Orozco and Siqueiros transform faults and closing across the Clipperton transform. The instantaneous present-day Cocos-Pacific pole is located at approximately 38.4° N, 109.5° W with an angular rotation rate of 2.10° m.y.^–1 This change in spreading direction explains the predominance of right-stepping discontinuities of orders 2–4 along the Siqueiros-Clipperton and Orozco-Rivera segments, but does not explain other aspects of segmentation which are thought to be linked to patterns of melt supply to the ridge axis.There are 23 significant seamount chains in the mapped area and most are created very near the spreading axis. Nearly all of the seamount chains have trends which fall between the absolute and relative plate motion vectors.     

Seismological constraints on the thermal structure along the Lucky Strike segment (Mid-Atlantic Ridge) and interaction of tectonic and magmatic processes around the magma chamber

The crust at mid-ocean ridges is formed through a combination of magmatic and tectonic processes. Along slow-spreading ridges, magmatism is inferred to be discontinuous and episodic, and lithospheric faulting may strongly interact with the melt supply system. These interactions can be studied for the first time at the Lucky Strike segment along the Mid-Atlantic Ridge (MAR), where a 3.4 km deep magma chamber (AMC) extending ~6 km along-axis is found at its centre (Singh et al. in Earth Planet Sci Lett 246:353–366, 2006). With an array of ocean bottom seismometers we have detected along this ridge segment approximately 400 microseismic events during a total of 6 days, and located 71 of them, whose local magnitudes ranged from 0.2 to 1.8. While most of the events were concentrated at non-transform offset and inside corners, three events with well-constrained locations were detected beneath the central volcano and at the edges of the AMC. Two of the microearthquakes, which occur in a brittle lithosphere and therefore at temperatures lower than 750°C, are deeper than the AMC and therefore very steep thermal gradients both along- and across-axis. Regionally seismicity deepens from ~6 km at the segment center to >10 km towards the ends.     

Spreading rates,rift propagation,and fracture zone offset histories during the past 5 my on the Mid-Atlantic Ridge; 25°–27°30′ S and 31°–34°30′ S

The southern Mid-Atlantic Ridge (MAR) is spreading at rates (34–38 mm yr⁻¹) that fall within a transitional range between those which characterize slow and intermediate spreading center morphology. To further our understanding of crustal accretion at these transitional spreading rates, we have carried out analysis of magnetic anomaly data from two detailed SeaBeam surveys of the MAR between 25°–27°30′S and 31°–34°30′S. Within these areas, the MAR is subdivided into 9 ridge segments bounded by large- and short-offset discontinuities of the ridge axis. From two-dimensional Fourier inversions of the magnetic anomaly data we establish the history of spreading within each ridge segment for the past 5 my and the evolution of the bounding ridge-axis discontinuities. We see evidence for the initiation and diminishment of small-offset discontinuities, and for the transition of rigid large-offset transform faults to less stable short-offset features. Individual ridge segments display independent spreading histories in terms of both the sense and amount of asymmetric spreading within each which have given rise to changes through time in the lengths of bounding ridge-axis discontinuities. Over the past 3–5 my, the short-offset discontinuities within the area have lengthened/shortened by approximately the same amount (∼ 10 km). During this same time period, larger-offset transform faults have remained comparatively constant in length. A shift in plate motion at anomaly 3 time may have given rise to change in the length of short-offset second-order discontinuities. However, the pattern of lengthening/shortening short-offset discontinuities we see is not simply related to the geometry of the plate boundary in these regions which precludes a simply relationship between plate motion changes and response at the plate boundary. We document a case of rapid (minimum 60 mm yr⁻¹) small-scale rift propagation, occurring between 2.5 and 1.8 my, associated with transition of the Moore transform fault to an oblique-trending ridge-axis discontinuity. Propagation across the Moore discontinuity and similar propagation within the 31°–34°30’S area may be associated with the reduced age contrast in lithosphere across second-order discontinuities. Total opening rates within our northern survey area decreased from anomaly 4′ to 2 time and rates within both areas have increased since the Jaramillo. Total opening rates measured for anomaly intervals differ along the plate boundary significantly, more than expected with changing distance to the pole of rotation. These differences imply a degree of short-term non-rigid plate behaviour which may be associated with ridge segments acting as independent spreading cells. Magnetic polarity transition widths from our inversion studies may be used to infer a zone of crustal accretion which is 3–6 km wide, within the inner floor of the rift valley. A systematic increase of transition width with age would be expected if deeper crustal sources dominate the magnetic signal in older crust but this is not observed. We present results from three-dimensional analysis of magnetic anomaly data which show magnetization highs located at the intersection of the MAR with both large- and short-offset discontinuities. Within the central anomaly the highs exceed 15 A m⁻¹ compared with a background of approximately 8–10 A m⁻¹ and they persist for at least 2.5 my. The highs may be caused by eruption of fractionated strongly magnetized basalts at ridge-axis discontinuities with both large and small offsets.     

Geophysical investigations over a segment of the Central Indian Ridge, Indian Ocean

 Swath bathymetric, gravity, and magnetic studies were carried out over a 55 km long segment of the Central Indian Ridge. The ridge is characterized by 12 to 15 km wide rift valley bounded by steep walls and prominent volcanic constructional ridges on either side of the central rift valley. A transform fault at 7°45′S displaces the ridge axis. A mantle Bouguer anomaly low of −14 mGals and shallowing of rift valley over the middle of the ridge segment indicate along axis crustal thickness variations. A poorly developed neovolcanic zone on the inner rift valley floor indicate dominance of tectonic extension. The off-axis volcanic ridgs suggest enhanced magmatic activity during the recent past. Received: 24 May 1996 / Rivision received: 13 January 1997     

Utilization of high resolution satellite gravity over the Carlsberg Ridge

The Carlsberg Ridge lies between the equator and the Owen fracture zone. It is the most prominent mid-ocean ridge segment of the western Indian Ocean, which contains a number of earthquake epicenters. Satellite altimetry can be used to infer subsurface geological structures analogous to gravity anomaly maps generated through ship-borne survey. In this study, free-air gravity and its 3D image have been generated over the Carlsberg Ridge using a very high resolution data base, as obtained from Geosat GM, ERS-1, Seasat and TOPEX/POSEIDON altimeter data. As observed in this study, the Carlsberg Ridge shows a slow spreading characteristic with a deep and wide graben (average width ∼15 km). The transform fault spacing confirms variable slow to intermediate characteristics with first and second order discontinuities. The isostatically compensated region of the Carlsberg Ridge could be demarcated with near zero contour values in the free-air gravity anomaly images over and along the Carlsberg Ridge axes and over most of the fracture zone patterns. Few profiles have been generated across the Carlsberg Ridge and the characteristics of slow/intermediate spreading ridge of various orders of discontinuity could be identified. It has also been observed in zero contour image as well as in the characteristics of valley patterns along the ridge from NW to SE that different spreading rates, from slow to intermediate, are occurring in different parts of the Carlsberg ridge. It maintains the morphology of a slow spreading ridge in the NW, where the wide and deep axial valley (∼1.5–3 km) also implies the pattern of a slow spreading ridge. However, a change in the morphology/depth of the axial valley from NW to SE indicates the nature of the Carlsberg Ridge as a slow to intermediate spreading ridge. For the prevailing security restrictions, lat./lon. coordinates have been omitted in few images.