渗滤液浸泡对深度脱水污泥强度和渗透性能的影响

为探讨深度脱水污泥作为垃圾填埋场覆盖材料在湿润气候区的服役性能,将杭州主城区污水处理厂处理后的深度脱水污泥分别在蒸馏水、渗滤液中浸泡一个月和两个月,测试其强度和渗透特性的变化规律,并与填埋场覆盖层常用的黏性土进行了对比。试验结果表明,相对于一般污泥,深度脱水污泥的无侧限抗压强度较高,但在渗滤液和蒸馏水中浸泡两个月后分别降低5.4%和18.9%。在蒸馏水和渗滤液中浸泡两个月的深度脱水污泥黏聚力有所降低,而有效内摩擦角提高约7.5°;在浸泡水和渗滤液后,脱水污泥的渗透系数提高约3～5倍。该深度脱水污泥应用于填埋场覆盖材料时,其强度达到城镇污水处理厂污泥填埋控制要求。     

Reuse of dewatered sewage sludge conditioned with skeleton builders as landfill cover material

High water and organic content of sewage sludge constricts its reuse and disposal. It is often necessary to solidify/stabilize the dewatered sludge with solidifying agents before landfill disposal. In this study, the sewage sludge was conditioned with skeleton builders, i.e., fly ash and lime combined with ferric chloride for the purpose of improving the dewatering efficiency. The dewatered sewage sludge was then directly reused as landfill cover materials since the skeleton builders also play a role in solidification of sludge. The geotechnical properties of the dewatered sewage sludge were investigated. The results show that the plasticity index of the dewatered sludge increases compared to that of the dewatered sludge without any conditioner, and the permeability coefficient changes from 10^?8 to 10^?5 cm s^?1. Furthermore, the strength of specimens increase with curing days. Microstructure analyses reveal that the main hydrated products are calcium silicate hydrate and ettringite, which contribute to the solidification/stabilization of the dewatered sludge. The results indicate that the dewatered sewage sludge conditioned with skeleton builders can be used as landfill covers. This study provides an alternative for traditional sewage sludge treatment and disposal.     

Analyses on a high leachate mound in a landfill of municipal solid waste in China

The leachate levels in the landfills in southern China are generally high. Field monitoring was carried out in the Suzhou landfill to investigate the leachate mound. The saturated hydraulic conductivity and soil–water characteristic curve (SWCC) of municipal solid waste were measured using samples taken from different depths of the landfill. Field monitoring reveals that a perched leachate mound and a substantial main leachate mound existed in the landfill. The saturated hydraulic conductivities of wastes in shallow, middle and deep depth were measured to be 4.81 × 10^?2, 3.50 × 10^?3 and 3.56 × 10^?4 cm/s, respectively. The results of SWCC tests show that the SWCC curve was steep when matric suction was low, and the shallower the waste the steeper would be the curve. In addition to the field and laboratory tests, an unsaturated–saturated seepage analysis was conducted to simulate the development of the high leachate mound and to calculate the annual leachate production. The simulated volumetric water content in the unsaturated zone was about 40 %, which agreed well with the test result. The calculated leachate mound was consistent with the field measurement. The calculated annual and daily leachate productions were all more reasonable than the results of the HELP model.     

Effect of Water and Leachate on Hydraulic Behavior of Compacted Bentonite,Calcareous Sand and Tuff Mixtures for Use as Landfill Liners

Compacted soil–bentonite liners, consisting of a sandy soil mixed with bentonite as backfill, are used extensively as engineered barriers for contaminant containment. This paper studies the valorization of local materials containing calcareous sand, tuff obtained from Laghouat region (in the South Algeria), to associate with bentonite in order to improve their hydraulic characteristics for use as landfill liner material. Firstly, a geotechnical characterization of mixtures chooses from a fixed percentage to 10% bentonite and different percentages of calcareous sand and tuff so that they are complementary to 90% by not 10%. Thereafter, the determination of saturated hydraulic conductivity at falling-head permeability (K_v) and oedometer (K_id, indirect Measure) tests of all compacted mixtures at Optimum Normal Proctor have been carried out using both permeates by tap water and a landfill leachate in order to simulate long-term conditions. The results showed that the saturated hydraulic conductivity of tap water is relatively lower than the one saturated by leachate in the falling-head test, unlike the oedometer test. The B₁₀CS₂₀T₇₀ mixture has satisfied the hydraulic conductivity criterion of bottom barriers (i.e. water permeated: k_v20° = 1.97 × 10^?9 and k_id from 7 × 10^?9 to 1.83 × 10^?10 < 10^?9m/s; leachate permeated: k_v20° = 2.91 × 10^?9 and k_id from 7 × 10^?9 at 1.44 × 10^?10 < 10^?9 m/s). Finally, a comparison between direct measurements of the saturated hydraulic conductivity by triaxial (K_d) test and oedometer test (K_id) in the range of effective stress applied 100–800 kPa led to propose equations of correlations between these two methods. In conclusion, adopted formulation B₁₀CS₂₀T₇₀ perfectly meets the regulatory requirements in force and constitutes an economic product based on available local materials for engineers barriers.     

Tunisian landfill leachate treatment using <Emphasis Type="Italic">Chlorella</Emphasis> sp.: effective factors and microalgae strain performance

The potential of the autoclaved Tunisian landfill leachate treatment using microalgae (Chlorella sp.) cultivation was investigated in this study. Landfill leachate was collected from Borj Chakir landfill, Tunisia. A full factorial experimental design 2² was proposed to study the effects of the incubation time and leachate ratio factors on the organic matter removal expressed in chemical oxygen demand (COD) and ammoniacal nitrogen (NH₄─N) and on the biological response of Chlorella sp. expressed by the cell density and chlorophyll content. All experiments were batch runs at ambient temperature (25 ± 2 °C). The Chlorella sp. biomass and chlorophyll a concentrations of 1.2 and 5.32 mg L^?1, respectively, were obtained with 10% leachate spike ratio. The obtained results showed that up to 90% of the ammoniacal nitrogen in landfill leachate was removed in 10% leachate ratio spiked medium with a residual concentration of 40 mg L^?1. The maximum COD removal rate reached 60% within 13 days of incubation time indicating that microalgae consortium was quite effective for treating landfill leachate organic contaminants. Furthermore, with the 10% leachate ratio spiked medium, the maximum lipid productivity was 4.74 mg L^?1 d^?1. The present study provides valuable information for potential adaptation of microalgae culture and its contribution for the treatment of Tunisian landfill leachate.     

污泥掺入生活垃圾后的力学特性试验研究

填埋是污泥消化处置的方法之一,由于污泥的工程特性较特殊,填埋会引发很多环境岩土工程问题。考虑到填埋工程会进行分层碾压铺填,在标准击实试验的击实功下制备试样,通过污泥与垃圾土混合后的直接剪切试验、渗透特性试验,考虑淋滤液和降解产气压力共同影响,进行边坡稳定分析。结果表明：污泥和垃圾混合后的强度比垃圾土的强度低,比污泥的强度高,改善了污泥的强度特性;污泥掺入垃圾后的渗透系数与垃圾土的渗透系数相当,没有劣化垃圾土的渗透特性,但比污泥的渗透系数有显著提高;随着污泥掺量的增加,边坡安全系数会先提高后降低,因此,应结合试验和稳定计算结果,确定实际工程的污泥掺入比;考虑降解产气对边坡稳定的影响,安全系数会降低约15%～20%。     

Electro-coagulation treatment of raw and autoclaved landfill leachate with aluminum electrodes: case study of Djebel Chakir (Tunisia)

Landfilling is a common practice worldwide for solid waste management. The leachate generated at landfill sites contains various organic and inorganic pollutants while it should be treated properly. In this study, the electrocoagulation (EC) process was recognized for its simplicity and effectiveness which was used for the treatment of leachate from the Djebel Chakir landfill site in northern Tunisia. In addition, we investigated the effect of microorganisms (e.g., bacteria, fungi, spore) on sludge production by the application of autoclaving treatment on raw leachate. The application of low current density (15 mA/cm²) within 2 h of treatment and using Al-Al electrodes revealed significant improvement of performance when autoclaving was applied. The chemical oxygen demand (COD) and nitrogen removal increased from 39 to 64% and from 13 to 30%, respectively. The sludge volume was reduced from 40 to 10%, and thus, its handling and disposal costs would be significantly decreased. The energy consumption rate was stable after 40 min of treatment at about 0.8 kWh/kg COD removed. Our study shows that removal of microorganisms by autoclaving prior to the EC process is promising for landfill leachate treatment. However, since autoclaving is far from being practical and cost-effective at full-scale plant, research on coupling EC with an alternative disinfecting process might be of great interest.     

Reclamation of calcareous saline–sodic soil using different amendments: Time changes of soluble cations in leachate

Soil salinity and sodicity are escalating problems worldwide, especially in arid and semiarid regions. A laboratory experiment was conducted using soil column to investigate leaching of soluble cations during reclamation process of a calcareous saline–sodic soil (CaCO₃?=?20.7%, electrical conductivity (EC)?=?19.8 dS m^?1, sodium absorption ratio (SAR)?=?32.2[meq L^?1]^0.5). The amendments consisted of control, cattle manure (50 g kg^?1), pistachio residue (50 g kg^?1), gypsum (5.2 g kg^?1; equivalent of gypsum requirement), manure + gypsum and pistachio residue + gypsum, in three replicates which were mixed thoroughly with the soil, while sulfuric acid as an amendment was added to irrigation water. To reflect natural conditions, after incubation period, an intermittent irrigation method was employed every 30 days. The results showed that EC, SAR, and soluble cations of leachate for the first irrigation step were significantly higher than those of the subsequent leaching runs. Moreover, the concentration of removed soluble cations was lower for the control and gypsum-treated soils. It was found that among applied amendments, treatments containing cattle manure showed higher concentrations of sodium, calcium, and magnesium in the leachate, while due to pistachio residue application, further amount of potassium was removed out of soil column. The addition of pistachio residue resulted in the highest reduction in soil salinity and sodicity since the final EC and exchangeable sodium percentage dropped to 18.0% and 11.6% of their respective initial values, respectively. In the calcareous soil, solubility of gypsum found to be limited, in contrast, when it was added in conjunction with organic amendments, greater amounts of sodium were leached.     

Environmental impact of an urban landfill on a coastal aquifer (El Jadida, Morocco)

The El Jadida landfill is one among many uncontrolled dumping sites in Morocco with no bottom liner. About 150 tons/day of solid wastes from mixed urban and industrial origins are placed directly on the ground. At the site of this landfill, the groundwaters circulate deeply (10–15 m) in the Cenomanian rock (calcareous–marl), which is characterised by an important permeability from cracks. The soil is sand–clay characterized by a weak coefficient of retention.The phreatic water ascends to the bottom of three quarries, which are located within the landfill. These circumstances, along with the lack of a leachate collection system, worsen the risks for a potential deterioration of the aquifer.To evaluate groundwater pollution due to this urban landfill, piezometric level and geochemical analyses have been monitored since 1999 on 60 wells. The landfill leachate has been collected from the three quarries that are located within the landfill. The average results of geochemical analyses show an important polluant charge vehiculed by landfill leachate (chloride = 5680 mg l⁻¹, chemical oxygen demand = 1000 mg l⁻¹, iron = 23 000 μg l⁻¹). They show also an important qualitative degradation of the groundwater, especially in the parts situated in the down gradient area and in direct proximity to the landfill. In these polluted zones, we have observed the following values: higher than 4.5 mS cm⁻¹ in electric conductivity, 1620 and 1000 mg l⁻¹ respectively in chlorides and sulfate (), 15–25 μg l⁻¹ in cadmium, and 60–100 μg l⁻¹ in chromium. These concentrations widely exceed the standard values for potable water.Several determining factors in the evolution of groundwater contamination have been highlighted, such as (1) depth of the water table, (2) permeability of soil and unsaturated zone, (3) effective infiltration, (4) humidity and (5) absence of a system for leachate drainage. So, to reduce the pollution risks of the groundwater, it is necessary to set a system of collection, drainage and treatment of landfill leachates and to emplace an impermeable surface at the site of landfill, in order to limit the infiltration of leachate.     

Magnetic properties and heavy metal content of sanitary leachate sludge in two landfill sites near Bandung,Indonesia

Magnetic properties and heavy metal content of landfill leachate sludge samples from two municipal solid waste disposal sites near Bandung, West Java, Indonesia, and their correlation with heavy metals are studied in the present work. Leachate was found to be sufficiently magnetic with mass-specific magnetic susceptibility that varies from 64.8 to 349.0 × 10⁻⁸ m³ kg⁻¹. It is, however, less magnetic than the soils around the landfill sites. The magnetic minerals are predominantly pseudo-single domain and multidomain magnetite. Leachate samples from the older but inactive disposal site, Jelekong, are found to be more magnetic than that from Sarimukti, the younger and active site. The enhancement of leachate due to the soil-derived ferrimagnetic particles is possibly the same for both Sarimukti and Jelekong. The fact that strong correlation between magnetic parameters and heavy metals is observed in Jelekong but is absent in Sarimukti suggests that the use of magnetic measurement as a proxy measurement for heavy metal content in leachate is plausible provided that the magnetic susceptibility exceeds certain threshold value. Moreover, the accumulation of magnetic minerals and heavy metals in leachate might depend on the activity and the age of landfill site.     

Development of a Darcy-Brinkman model to simulate water flow and tracer transport in a heterogeneous karstic aquifer (Val d’Orléans, France)

Darcy’s law is the equation of reference widely used to model aquifer flows. However, its use to model karstic aquifers functioning with large pores is problematic. The physics occurring within the karstic conduits requires the use of a more representative macroscopic equation. A hydrodynamic model is presented which is adapted to the karstic aquifer of the Val d’Orléans (France) using two flow equations: (1) Darcy’s law, used to describe water flow within the massive limestone, and (2) the Brinkman equation, used to model water flow within the conduits. The flow equations coupled with the transport equation allow the prediction of the karst transfer properties. The model was tested by using six dye tracer tests and compared to a model that uses Darcy’s law to describe the flow in karstic conduits. The simulations show that the conduit permeability ranges from 5?×?10^?6 to 5.5?×?10^?5?m² and the limestone permeability ranges from 8?×?10^?11 to 6?×?10^?10?m². The dispersivity coefficient ranges from 23 to 53 m in the conduits and from 1 to 5 m in the limestone. The results of the simulations carried out using Darcy’s law in the conduits show that the dispersion towards the fractures is underestimated.     

Landfill development in the urban fringe of Metro Manila

In low-lying areas of urban and suburban regions in Asia, the use of landfill has allowed urban land use to encroach onto watery landforms, such as back marshes, which were formerly used as rice fields. To improve understanding of the associations between land-use patterns and landfill development, we carried out a case study in the urban fringe of Metro Manila in the Philippines. We examined landfill volume derived from land-use change using GIS, and field surveyed qualitative aspects of the landfill used. We calculated the rate of application of landfill in low-lying housing development areas to be 5.0 × 10³ m³ km^?2 year^?1, most of which consisted of offsite disposal of construction waste or crushed rock produced by urban development and renewal on the adjoining uplands. The flow of fill material from offsite sources to onsite landfill development areas was on the basis of individual agreements between suppliers and developers.     

Strain Rate Dependency of Coarse Crystal Marble Under Uniaxial Compression: Strength,Deformation and Strain Energy

Strain rate during testing, uniaxial or triaxial, has important influence on the measured mechanical properties of rocks. Uniaxial compression tests were performed at nine pre-specified static-to-quasistatic strain rates (ranging from 1 × 10^?5 to 1 × 10^?1 s^?1) on coarse crystal marble. The aim is to gain deep insight into the influence of strain rate on characteristic stresses, deformation properties and conversion of strain energy of such rock. It is found that the strain rate of 5 × 10^?3 s^?1 is the threshold to delineate the failure modes the tested coarse marble behaves in. At a strain rate less than this threshold, single-plane shear and conjugate X-shaped shear are the main failure modes, while beyond this threshold, extensile and splitting failures are dominant. The stress for crack initiation, the critical stress for dilation, the peak stress, and Young’s modulus are all found to increase with strain rate, with an exception that the above stresses and modulus appear relatively low compared to the strain rate in the range of between 1 × 10^?4 and 5 × 10^?3 s^?1. The pre-peak absorbed strain energy, damage strain energy and elastic strain energy are found to increase with strain rate. In addition, the elastic strain energy stored before peak point favors brittle failure of the specimen, as the more stored elastic energy in the specimen, the stronger the fragmenting.     

Study of the water saving potential of an irrigation area based on a remote sensing evapotranspiration model

To estimate the water saving potential of an irrigation area and create a scientific water saving plan, the irrigation water use efficiency and water productivity of the Hulanhe irrigation area for 2007–2014 were calculated, and the water saving potentials of different water saving plans were determined from the perspectives of engineering and crop water saving. The results showed that the evapotranspiration calculated from the surface energy balance algorithm for land model (SEBAL) agreed well with the measured results. The irrigation water use efficiency in the Hulanhe irrigation area was positively correlated with precipitation of irrigated land and was negatively correlated with the net irrigation water volume. The engineering water saving potential ranges for periods of 5, 8, 11, and 15 years were (1.702?×?10⁸, 5.103?×?10⁸) m³, (1.783?×?10⁸, 5.184?×?10⁸) m³, (1.865?×?10⁸, 5.266?×?10⁸) m³, and (2.301?×?10⁸, 5.702?×?10⁸) m³, respectively, and the water saving potential increased year over year. Low amounts of precipitation of irrigated land corresponded with small amounts of net irrigation water and greater water saving potential. Based on the cumulative frequency of the water productivity calculated for the Hulanhe irrigation area from 2007 to 2014, the target water productivity for short (50% of the multi-year average cumulative water productivity) and long (70% of the multi-year average cumulative water productivity) terms were 1.03 kg/m³ and 1.22 kg/m³, respectively, and the cumulative crop water saving potentials for short and long terms were 1.18?×?10⁸ and 2.74?×?10⁸ m³, respectively. These results provided a theoretical reference for creating water saving plans for irrigation areas.     

Field-monitored settlement and other behavior of a multi-stage municipal waste landfill, Korea

The behavior of the Gimpo #2 landfill, which is an active landfill and the largest in Korea, is analyzed using field measurement data obtained from various field instruments installed within the landfill. The data included in this analysis are the leachate head within the landfill, waste load data using soil pressure plate and settlement data from settlement plate on the surface of the waste of each stage fill including the settlement of the soft foundation clay soil. Landfill blocks are selected both near the embankment and in the center area of the landfill. The analysis of the field-monitored data showed that the leachate head increase was negligible near the embankment. It was significant in the central block as the waste loads increase and reached 15 m at the fourth stage of waste disposal. The reason that the leachate head is higher in the central block than near the embankment is due to the long drainage path and the loss of gradient of drain pipes. The range of unit weight of the waste converted from the measurement data of earth pressure cell was 0.91–1.24 t/m³ and the average value was 1.05 t/m³. The values reflect well the waste compositions recently buried in GML #2, since from 1998 the waste disposed in GML #2 did not contain food waste. The magnitude of final settlements that occurred in each stage loading of 5 m thickness in the peripheral block was very close to 120 cm. The settlement rate of the waste by dividing the thickness of waste was 24 %. This rate can be divided into 10 % by waste loading and 14 % by waste decomposition. The delay of settlements is recognized in each waste layer for second and third loading in the central block due to the accumulation of leachate within the landfill.     

Photo-induced degradation of emamectin benzoate: effect of iron amendments and solvent system

Photodegradation is the major dissipation pathway for emamectin benzoate (EB) in water. Therefore, the photolysis of EB was studied in distilled water (DW) and methanol under different irradiation conditions such as natural sunlight, UV tube, and artificially stimulated light (mercury lamp 125 W). The results of the study showed that EB degrades rapidly in DW than in methanol as evidenced by a photodegradation efficiency of about 75 % achieved in DW, after 24 h of irradiation with UV light, while in methanol, it was only 59.3 %. The addition of iron to EB solution in DW further enhanced its photodegradation. The rate of photodegradation of EB was recorded to be increased from 5.5 × 10^?2 to 1.0 × 10^?1 k/h after amendment with iron. The order for the rate of photodegradation of EB was DW + Fe > DW > methanol, with their respective t _1/2 values of 6.5, 12.6, and 18.7 h. Fe amendment was also found to enhance the degradation efficiency of EB even in the absence of any light (dark).     

<Emphasis Type="Italic">Inoculum</Emphasis>-free start-up of biofilm- and sludge-based deammonification systems in pilot scale

Undiluted reject water from the dewatering of anaerobic sludge with an average total nitrogen content of 718 ± 117 mg L^?1 (n = 63) was used to start-up autotrophic nitrogen removal in three different pilot-scale (3 m³) deammonification configurations: (1) biofilm; (2) activated sludge sequence batch; and (3) two-staged (nitritation–anammox). Time- and concentration-based aeration control with alternating aerobic/anaerobic phases was applied for all reactor configurations. All reactors were initiated without anammox-specific inoculum, and biofilm was grown onto blank carriers. During the initial start-up period, biological nitrogen removal was found to be inhibited by an excessive free ammonia content (>10 mg-N L^?1), resulting from the use of high-strength reject water as the process feed. After implementation of free ammonia control by pH adjustment to 6.5–7.5, propagation of the deammonification process was observed with increased nitrogen removal with slight accumulation of NO₃ ^?–N. The highest total nitrogen removal rates were achieved with the single-reactor biofilm- and sludge-based deammonification processes (1.04 and 0.30 kg-N m^?3 day^?1, respectively). The critical factors for successful start-up and stable operation of deammonification reactors turned out to be control of pH below 7.5, dissolved oxygen at 0.3–0.8 mg-O₂ L^?1 and influent solids values below 1000 nephelometric turbidity units. Microbial analysis demonstrated that highest anammox enrichment was achieved in the biofilm reactor (9.40 × 10⁸ copies g^?1 total suspended solids). These data demonstrate the potential of an in-situ grown sludge- or biofilm-based concept for the development and propagation of deammonification process.     

Evaluation of groundwater quality and health risks from contamination in the north edge of the Loess Plateau,Yulin City,Northwest China

Groundwater is a vital source for domestic and irrigation purposes in the loess area of Northwest China where climate is arid. However, the quality of groundwater in this area is deteriorating due to intensive industrial and agricultural activities, and this has a great adverse impact on human health. In order to better understand the pollution status of groundwater and the health risks to local residents, comprehensive water quality index was applied to assess the quality of drinking water in Yulin City, Northwest China, and sodium adsorption ratio, sodium percentage, residual sodium carbonate and permeability index were used to evaluate the quality of irrigation water. Moreover, the health risks caused by ingestion of groundwater were evaluated using the model proposed by the Ministry of Environmental Protection of the PR China. The results show that all groundwater samples for irrigation will not induce soil salinization, but more than half of them are not suitable for drinking, and Fe, Mn, TH, Mg²⁺ and NO₃–N are the common contaminants which are mainly from natural processes, industrial and agricultural activities. The health risk assessment indicates that children face greater non-carcinogenic risk than adults. The order of contribution of contaminants to non-carcinogenic risk is NO₃ ^? > As > F^? > Fe > Mn > Ba²⁺ > Cr⁶⁺ > Zn > NO₂ ^?. The average carcinogenic risk of carcinogens (Cr⁶⁺ and As) is 1.17 × 10^?4 and 1.37 × 10^?4 for adults and children, respectively, which surpasses the permissible level (1 × 10^?6) stipulated by the Ministry of Environmental Protection of the PR China. Hence, effective measures are highly demanded to manage groundwater pollution and reduce the risks to human health.     

Groundwater sustainability and groundwater/surface-water interaction in arid Dunhuang Basin,northwest China

The Dunhuang Basin, a typical inland basin in northwestern China, suffers a net loss of groundwater and the occasional disappearance of the Crescent Lake. Within this region, the groundwater/surface-water interactions are important for the sustainability of the groundwater resources. A three-dimensional transient groundwater flow model was established and calibrated using MODFLOW 2000, which was used to predict changes to these interactions once a water diversion project is completed. The simulated results indicate that introducing water from outside of the basin into the Shule and Danghe rivers could reverse the negative groundwater balance in the Basin. River-water/groundwater interactions control the groundwater hydrology, where river leakage to the groundwater in the Basin will increase from 3,114?×?10⁴ m³/year in 2017 to 11,875?×?10⁴ m³/year in 2021, and to 17,039?×?10⁴ m³/year in 2036. In comparison, groundwater discharge to the rivers will decrease from 3277?×?10⁴ m³/year in 2017 to 1857?×?10⁴ m³/year in 2021, and to 510?×?10⁴ m³/year by 2036; thus, the hydrology will switch from groundwater discharge to groundwater recharge after implementing the water diversion project. The simulation indicates that the increased net river infiltration due to the water diversion project will raise the water table and then effectively increasing the water level of the Crescent Lake, as the lake level is contiguous with the water table. However, the regional phreatic evaporation will be enhanced, which may intensify soil salinization in the Dunhuang Basin. These results can guide the water allocation scheme for the water diversion project to alleviate groundwater depletion and mitigate geo-environmental problem.     

Groundwater balance in the Khor Arbaat basin, Red Sea State, eastern Sudan

The Khor Arbaat basin is the main source of potable water supply for the more than 750,000 inhabitants of Port Sudan, eastern Sudan. The variation in hydraulic conductivity and storage capacity is due to the heterogeneity of the sediments, which range from clay and silt to gravely sand and boulders. The water table rises during the summer and winter rainy seasons; it reaches its lowest level in the dry season. The storage capacity of the Khor Arbaat aquifer is estimated to be 21.75?×?10⁶ m³. The annual recharge through the infiltration of flood water is about 1.93?×?10⁶ m³. The groundwater recharge, calculated as underground inflow at the ‘upper gate’, is 1.33?×?10⁵ m³/year. The total annual groundwater recharge is 2.06?×?10⁶ m³. The annual discharge through underground outflow at the ‘lower gate’ (through which groundwater flows onto the coastal plain) is 3.29?×?10⁵ m³/year. Groundwater discharge due to pumping from Khor Arbaat basin is 4.38?×?10⁶ m³/year on average. The total annual groundwater discharge is about 4.7?×?10⁶ m³. A deficit of 2.6?×?10⁶ m³/year is calculated. Although the total annual discharge is twice the estimated annual recharge, additional groundwater flow from the fractured basement probably balances the annual groundwater budget since no decline is observed in the piezometric levels.