在X模式单道成像与观测系统重复性关系下的多道观测系统重复性

时移地震中新提出的多道观测系统重复性,逐一应用于面元,可以给出每个面元单一的观测系统重复性,形成对应叠后成像的地震道重复性的面分布,对于评估时移地震重复性具有重要意义.前人研究抽象了多道间观测系统重复性与单道间观测系统重复性的关系,给出了多道观测系统重复性的衡量方法及其理论依据.其理论中依赖了地震数据重复性与单道观测系统重复性的线性关系模型,而这一关系在单道观测系统重复性的有限范围内较为准确.针对这一问题,本文提出了X模式拟合的关系模型,与全范围的单道地震数据重复性随观测系统重复性的变化趋势更好地吻合,并采用对大单道观测系统重复性的向X节点的收缩,使原多道观测系统重复性的相应关系在整个数据范围内基本成立.基于实际数据的研究表现了该方法的数据分析结果的新特性和应用价值.     

基于褶积原理和改进广义S变换的震动波衰减补偿试验研究

为了恢复震动波能量在传播过程中产生的衰减损耗,提出基于褶积原理求取品质因子Q的方法与改进广义S变换相结合的反Q滤波法。通过震动波衰减补偿模型试验,对试验数据进行改进广义S变换的时频特性分析,得出了信号的能量分布情况以及时间频率对应关系;采用基于褶积原理求取品质因子的方法,得到时变Q值;对试验数据进行反Q滤波处理,使震动波能量得到了补偿。结果表明本文提出的反Q滤波法提高了对震动波能量衰减补偿的效果,拓宽了地震资料的频带,提高了地震资料分辨率,有利于进行高分辨率地震勘探、深部信号增强和油气藏预测工作的开展。     

基于反演的稳定高效衰减补偿方法

反Q滤波方法是提高地震数据分辨率的一种有效途径,可以用来补偿振幅和校正相位.常规的反Q滤波方法一般基于波场延拓理论,具有不稳定性或振幅补偿不足的缺点.本文基于波场延拓的正Q滤波方程,借鉴反演的思想以及正则化策略提出了一种新的衰减补偿方法,该方法稳定、精确,利用该方法可最终得到高分辨的地震记录.该方法仅计算有效频带内的频率分量,提高了计算效率.模拟数据以及实际数据处理验证了本文方法的有效性.     

叠前三维地震近地表吸收补偿技术在大庆油田的应用研究(英文)

与深层致密岩石相比,相对疏松的近地表地层严重吸收了地震波的高频成分,降低了地震数据的分辨率和高频成分的信噪比。本文利用井中雷管激发、地面检波器接收的微测井直达波资料,通过分析近地表地层不同传播距离的地震直达波频谱信息差异,采用维纳滤波方法,进行近地表吸收补偿反滤波器的求取,将不同微测井测量点对应的近地表吸收补偿反滤波器应用于相应的叠前共检波点道集地震数据,完成了叠前地震数据的空变吸收衰减补偿,克服了叠后地震数据无法实现空变补偿的难题。叠前三维地震近地表吸收补偿后的数据,较补偿前地震数据的优势信噪比频带宽度明显拓宽,低频成分基本保持,反射信息量有较大程度增加,而且与合成记录吻合更好,能更好的满足地质解释的需要,提高解释精度。     

Multi-trace basis-pursuit seismic inversion for resolution enhancement

Seismic inversion is an important tool that transfers interface information of seismic data to formation information, which renders the seismic data easily understood by geologists or petroleum engineers. In this study, a novel multi-trace basis-pursuit inversion method based on the Bayesian theory is proposed to enhance the vertical resolution and overcome the lateral instability of inversion results between different traces occasionally seen in the traditional trace-by-trace basis-pursuit inversion method. The Markov process is initially introduced to describe the relationship between adjacent seismic traces and their correlation, which we then close couple in the equation of our new inversion method. A recursive function is further derived to simplify the inversion process by considering the particularity of the coefficient matrix in the multi-trace inversion equation. A series of numerical-analysis and field data examples demonstrates that both the traditional and the new methods for P-wave impedance inversion are helpful in enhancing the resolution of thin beds that are usually difficult to discern from original seismic profiles, thus highlighting the importance of acoustic-impedance inversion for thin bed interpretation. Furthermore, in addition to yielding thin bed inversion results with enhanced lateral continuity and high vertical resolution, our proposed method is robust to noise and cannot be easily contaminated by it, which we verify using both synthetic and field data.     

Stratigraphic absorption compensation based on multiscale shearlet transform

Seismic waves propagating through viscoelastic media experience stratigraphic absorption and attenuation effects, which directly affect the imaging resolution in seismic exploration. Without stratigraphic absorption, the ratio of deep reflection energy to shallow reflection energy (attenuation ratio) is invariable at different frequencies. If a seismogram is decomposed into different frequency bands, these signals will show similar time–energy distributions. Therefore, the attenuation ratios should be similar across different frequency bands, except for frequency-variable weights. Nevertheless, the frequency-variable weights for different frequency bands can be obtained by benchmarking against the time–energy distributions of low-frequency information because the loss of low-frequency information is relatively insignificant. In this light, we obtained frequency-variable weights for different frequencies and established a stratal absorption compensation (SAC) model. The anisotropic basis of the shearlet enables nearly optimal representation of curved-shape seismic signals, and shearlets at different scales can represent signals for different frequency bands. Then, we combined the SAC model with the shearlet transform and established the new compensation method. As the signal and noise have different distributions in the shearlet domain, we selectively compensated the signals using a thresholding algorithm. Hence, it was possible to avoid noise enhancement. This is the prominent advantage of the proposed method over other compensation methods.     

Non‐uniqueness with refraction inversion – the Mt Bulga shear zone

The tau‐p inversion algorithm is widely employed to generate starting models with many computer programs that implement refraction tomography. However, this algorithm can frequently fail to detect even major lateral variations in seismic velocities, such as a 50 m wide shear zone, which is the subject of this study. By contrast, the shear zone is successfully defined with the inversion algorithms of the generalized reciprocal method. The shear zone is confirmed with a 2D analysis of the head wave amplitudes, a spectral analysis of the refraction convolution section and with numerous closely spaced orthogonal seismic profiles recorded for a later 3D refraction investigation. Further improvements in resolution, which facilitate the recognition of additional zones with moderate reductions in seismic velocity, are achieved with a novel application of the Hilbert transform to the refractor velocity analysis algorithm. However, the improved resolution also requires the use of a lower average vertical seismic velocity, which accommodates a velocity reversal in the weathering. The lower seismic velocity is derived with the generalized reciprocal method, whereas most refraction tomography programs assume vertical velocity gradients as the default. Although all of the tomograms are consistent with the traveltime data, the resolution of each tomogram is comparable only with that of the starting model. Therefore, it is essential to employ inversion algorithms that can generate detailed starting models, where detailed lateral resolution is the objective. Non‐uniqueness can often be readily resolved with head wave amplitudes, attribute processing of the refraction convolution section and additional seismic traverses, prior to the acquisition of any borehole data. It is concluded that, unless specific measures are taken to address non‐uniqueness, the production of a single refraction tomogram that fits the traveltime data to sufficient accuracy does not necessarily demonstrate that the result is either correct, or even the most probable.     

基于POCS方法指数阈值模型的不规则地震数据重建(英文)

不规则地震数据会对地震多道处理技术的正确运行造成不良影响,降低地震资料的处理质量。本文将广泛用于图形图像重建的凸集投影方法应用到地震数据重建领域,实现规则样不规则道缺失数据的插值重建。对于整道缺失地震数据,将POCS迭代重建过程由时间域转移到频率域实现,避免每次迭代都对时间做正反Fourier变换,节约了计算量。在迭代过程中,阈值参数的选择方式对重建效率有重要影响。本文设计了两种阈值集合模型进行重建试验,试验结果表明:在相同重建效果下,指数型阈值集合模型可以有效减少迭代次数,提高重建效率。此外,分析了POCS重建方法的抗噪性能和抗假频性能。最后,理论模型和实际资料处理效果验证了本文重建方法的正确性和有效性。     

矢量黏弹性衰减补偿高斯束偏移

基于弹性波动理论的多波多分量高斯束偏移具有计算效率高和成像准确等优点.但是目前此方法没有考虑实际地下介质的黏弹性对地震波传播的影响,从而无法补偿能量衰减和校正相位畸变,这使得该方法对一些含高黏弹性地层的成像效果不佳.针对衰减区域的成像问题,本文提出一种黏弹性衰减补偿高斯束偏移方法,该方法以多波多分量矢量波场弹性高斯束偏移方法为基础,在偏移过程中沿射线路径通过引入品质因子Q来考虑黏弹性影响并进行衰减补偿.该方法能够在偏移过程中实现PP波和PS波的自动分离及分别成像.同时,本文给出了在矢量波场偏移过程中提取角度域共成像点道集的方法,以便用于成像质量控制,并为后续速度和黏弹性参数反演提供所需的数据.本文利用2D层状模型和洼陷模型进行了方法测试,其成像结果验证了本文所提出的黏弹性衰减补偿高斯束偏移方法的可行性和有效性.     

基于非均匀Fourier变换的地震数据重建方法研究

不规则采样地震数据会对地震数据的多道处理造成严重影响,将非均匀Fourier变换和贝叶斯参数反演方法相结合,对不规则空间带限地震数据进行反演重建.对每一个频率依据最小视速度确定出重建数据的带宽,然后从不规则地震数据中估计出重建数据的空间Fourier系数.将不规则地震数据重建视为信息重建的地球物理反演问题,运用贝叶斯参数反演理论来估计Fourier系数.在反演求解时,使用共轭梯度算法,以保证求解的稳定性,加快解的收敛速度.理论模型和实际资料处理验证了本方法的有效性和实用性.     

基于反演的衰减补偿方法(英文)

提高地震资料分辨率的一个有效途径就是衰减补偿,通过对地震波的衰减和频散效应进行校正,提高地震资料的分辨率。常规衰减补偿方法都是基于波场延拓的反Q滤波方法。本文利用Futterman衰减模型,导出了一种衰减介质中合成地震记录的计算方法,在此基础上将衰减补偿问题归结为一个Fredholm积分方程反问题,利用反演方法来实现衰减补偿。针对衰减补偿问题的不稳定性,利用Tikhonov正则化方法提高反演过程的稳定性,数值模拟资料和实际资料处理结果验证了方法的有效性。     

最小二乘地震波4D球面扩散与吸收补偿方法及其应用研究

基于地震波传播过程中能量衰减的物理机制理论分析,通过梳理已有研究成果,采用正弦函数分频、最小二乘法高阶e指数曲线拟合等技术研发了可实现时间、频率、炮检距和炮域内地震波4D球面扩散与大地吸收衰减补偿方法,解决了常规振幅补偿无法补偿振幅随频率衰减和剩余补偿的问题。实际地震资料处理结果表明,相较于常规振幅补偿方法,该方法可更准确地对球面扩散和大地吸收造成的地震波衰减进行自适应拟合与补偿,较好的恢复中、高频信号成分,提高主频,拓宽频带,有效提高成像分辨率,并较好地保持了振幅的相对关系。     

A compound method for random noise attenuation

Random noise attenuation, preserving the events and weak features by improving signal‐to‐noise ratio and resolution of seismic data are the most important issues in geophysics. To achieve this objective, we proposed a novel seismic random noise attenuation method by building a compound algorithm. The proposed method combines sparsity prior regularization based on shearlet transform and anisotropic variational regularization. The anisotropic variational regularization which is based on the linear combination of weighted anisotropic total variation and anisotropic second‐order total variation attenuates noises while preserving the events of seismic data and it effectively avoids the fine‐scale artefacts due to shearlets from the restored seismic data. The proposed method is formulated as a convex optimization problem and the split Bregman iteration is applied to solve the optimization problem. To verify the effectiveness of the proposed method, we test it on several synthetic seismic datasets and real datasets. Compared with three methods (the linear combination of weighted anisotropic total variation and anisotropic second‐order total variation, shearlets and shearlet‐based weighted anisotropic total variation), the numerical experiments indicate that the proposed method attenuates random noises while alleviating artefact and preserving events and features of seismic data. The obtained result also confirms that the proposed method improves the signal‐to‐noise ratio.     

基于吸收衰减补偿的多分量高斯束逆时偏移

高斯束逆时偏移结合了射线类偏移的高计算效率和波动方程逆时偏移的高精度,能很好地处理焦散点、大倾角成像问题,并且具有面向目标成像的能力.多分量地震资料的偏移技术可以对地下复杂构造进行更准确的成像,由于实际地下介质具有黏滞性,研究黏弹性叠前逆时偏移具有一定的现实意义.本文采用高斯束逆时偏移方法对多分量地震数据进行吸收衰减补偿,首先分别给出纵波和转换波共炮域高斯束叠前逆时偏移方法原理,在此基础上推导补偿吸收衰减的表达式,校正Q引起的振幅衰减和相位畸变,实现基于吸收衰减补偿的多分量高斯束叠前逆时偏移.数值模型的测试结果显示,在考虑地下介质的黏滞性时,本文方法具有更高的成像分辨率.     

一种自适应增益限的反Q滤波

地层的Q吸收会造成地震波振幅衰减、相位畸变,分辨率和信噪比明显降低.反Q滤波可消除由于地层Q吸收造成的振幅衰减和相位畸变,从而提高地震资料的分辨率;但反Q滤波振幅补偿的数值不稳定性问题会严重降低地震资料的信噪比,并产生很多假象.截止频率法和稳定因子法反Q滤波振幅补偿方法虽可控制数值非稳定性问题,但振幅补偿函数的增益限为一个时不变的常数,且与地震数据动态范围无关,其经常会压制深层地震波的高频成分,反而降低地震资料的分辨率;因此,本文在研究截止频率法和稳定因子法的基础上,结合地震数据的动态范围对地震记录分辨率的影响,提出了一种自适应增益限的反Q滤波振幅补偿方法,其增益限和稳定因子都是时变的,且都自适应于地震数据有效频带的截止频率.合成数据和实际数据试算表明,本文的自适应增益限的反Q滤波方法可恢复地震信号有效频带范围内的能量,且能较好地控制数值非稳定性问题,最终获得高分辨率和高信噪比的地震数据.     

近地表高频补偿技术在三维地震勘探中的应用研究

近地表的滤波作用不仅会引起地震波高频成分的快速衰减,还会引起地震子波相位的畸变,在高分辨率地震资料处理中,必须对这些由近地表引起的衰减和频散进行补偿.文中研究了近地表吸收规律,应用微测井资料求出了表层的吸收衰减因子,补偿了近地表高频成分,给出了针对三维地震资料的近地表高频补偿方法,对大庆齐家北工区的地震资料进行了实际应用,同时还应用属性分析技术对应用效果进行了分析评价,结果表明,该方法是可行的.     

自适应VMD的地震资料高分辨率处理方法研究

随着勘探开发的不断深入,常规地震资料受分辨率的限制难以满足精细勘探开发的需求.由于地震信号不同频率成分的衰减程度不同,故可结合分频技术对各频率成分进行差异化补偿,进而提高地震资料分辨率.而常规分频技术普遍分频精度不高,存在模态混叠现象,不能较好地适用于地震资料处理.针对上述问题,本文提出基于自适应变分模态分解(VMD)...     

Three-parameter Radon transform in layered transversely isotropic media

Radon transform is a powerful tool with many applications in different stages of seismic data processing, because of its capability to focus seismic events in the transform domain. Three-parameter Radon transform can optimally focus and separate different seismic events, if its basis functions accurately match the events. In anisotropic media, the conventional hyperbolic or shifted hyperbolic basis functions lose their accuracy and cannot preserve data fidelity, especially at large offsets. To address this issue, we propose an accurate traveltime approximation for transversely isotropic media with vertical symmetry axis, and derive two versions of Radon basis functions, time-variant and time-invariant. A time-variant basis function can be used in time domain Radon transform algorithms while a time-invariant version can be used in, generally more efficient, frequency domain algorithms. Comparing the time-variant and time-invariant Radon transform by the proposed basis functions, the time-invariant version can better focus different seismic events; it is also more accurate, especially in presence of vertical heterogeneity. However, the proposed time-invariant basis functions are suitable for a specific type of layered anisotropic media, known as factorized media. We test the proposed methods and illustrate successful applications of them for trace interpolation and coherent noise attenuation.     

Implementation aspects of eigendecomposition‐based high‐resolution velocity spectra

In this paper, we discuss high‐resolution coherence functions for the estimation of the stacking parameters in seismic signal processing. We focus on the Multiple Signal Classification which uses the eigendecomposition of the seismic data to measure the coherence along stacking curves. This algorithm can outperform the traditional semblance in cases of close or interfering reflections, generating a sharper velocity spectrum. Our main contribution is to propose complexity‐reducing strategies for its implementation to make it a feasible alternative to semblance. First, we show how to compute the multiple signal classification spectrum based on the eigendecomposition of the temporal correlation matrix of the seismic data. This matrix has a lower order than the spatial correlation used by other methods, so computing its eigendecomposition is simpler. Then we show how to compute its coherence measure in terms of the signal subspace of seismic data. This further reduces the computational cost as we now have to compute fewer eigenvectors than those required by the noise subspace currently used in the literature. Furthermore, we show how these eigenvectors can be computed with the low‐complexity power method. As a result of these simplifications, we show that the complexity of computing the multiple signal classification velocity spectrum is only about three times greater than semblance. Also, we propose a new normalization function to deal with the high dynamic range of the velocity spectrum. Numerical examples with synthetic and real seismic data indicate that the proposed approach provides stacking parameters with better resolution than conventional semblance, at an affordable computational cost.     

地震资料叠前去噪技术的现状与未来

地震资料叠前去噪是勘探地震资料处理的关键问题之一，但这个问题长期以来一直没有得到很好的解决，是提高地震资料分辨率的一个主要障碍，其中，如何有效地消除产生与地层间的多次反射波又是地震资料叠前去噪的核心问题。为此，人们进行了长期不懈的努力，以更好地消除多次波。本文着重概述现今实生常中常用的几种比较有效的消除多次波方法，包括拉冬变换，F－K方法和聚束滤波方法；同时也概述了预测反积消除水层混响和用K－L变换方法消除随机噪音提高信噪比等方法；最后，还讨论了近年发展的地震资料叠前去噪新方法及其发展趋势。