Structural evolution of the Ural–Tian Shan junction: A view from Karatau ridge,South Kazakhstan

The deformation history of the Late Palaeozoic Ural–Tian Shan junction is discussed for the example of the Karatau ridge in southern Kazakhstan. Three deformation events are recognized. The Late Carboniferous D1 event is characterized by Laramide-style thrust-and-fold structures on the southern margin of Kazakhstan with shortening in a NE–SW direction. The Latest Permian and Triassic D2 event is controlled by compression in an east–west direction, which reflects collisional deformation in the Urals. The main structures are submeridional folds and north–west-striking sinistral strike–slip faults. The Triassic D3 event with shortening in a north–south direction reflects collision of the Turan microcontinent against the southern margin of Kazakhstan. The main structures are north–west-striking dextral strike–slip faults. Our new data provides important clues for the reconstruction of pre-Cretaceous structures between the Urals and the Tian Shan.     

Early Jurassic Soft-Sediment Deformation Interpreted as Seismites in the Wuqia Pull-Apart Basin and the Strike-Slip Talas–Ferghana Fault, Xinjiang, China

The early Jurassic soft-sediment deformation occurring within lacustrine sandstone is distributed mainly in the Wuqia region of SW Tianshan Mountains, Xinjiang, western China. Triggered by earthquakes, such deformation was found to occur in three beds overlying the lower Jurassic Kangsu Formation. The main styles of deformation structures comprise load cast, ball-and-pillow, droplet, cusps, homogeneous layer, and liquefied unconformity. The deformation layers reflect a series of three strong earthquakes at the end of early Jurassic in the Wuqia region. The differences of deformation mechanisms undergone might represent the varying magnitudes of the earthquake events. During the early Jurassic, the Wuqia region was located in a pull-apart basin controlled by the significant Talas-Ferghana strike-slip fault in central Asia, which initiated the soft-sediment deformation induced by earthquakes. Our research suggests that the paleoseismic magnitudes could have ranged from Ms 6.5 to 7.     

Stable isotope characterization of pedogenic and lacustrine carbonates from the Chinese Tian Shan: Constraints on the Mesozoic–Lower Cenozoic palaeoenvironmental evolution

In the Mesozoic–Cenozoic continental deposits of the Tian Shan area, two main levels containing pedogenic carbonates have been identified on both the southern and northern foothills of the range: one in the Upper Jurassic series and one in the Upper Cretaceous–Lower Palaeocene series. In order to reconstruct the palaeoenvironmental and palaeotopographic characteristics of the Tian Shan area during these two periods, we measured the oxygen and carbon isotope composition of these pedogenic carbonates (calcrete and nodules). The stable isotope compositions are homogeneous: most δ¹⁸O values are between 21 and 25‰ and most δ¹³C values are between −4 and −6‰. No distinction can be made between the calcrete and nodule isotopic compositions. The constancy of isotopic values across the Tian Shan is evidence of a development of these calcification features in similar palaeoenvironmental conditions. The main inference is that no significant relief existed in that area at the Cretaceous−Palaeogene boundary, implying that most of the present relief developed later, during the Cenozoic. In addition to the pedogenic carbonates, few beds of limestones interstratified in the Jurassic series of the southern foothills display oxygen and carbon isotope compositions typical of lacustrine carbonates, ruling out brackish water incursion at that period in the region.     

The Ural–Herirud transcontinental postcollisional strike-slip fault and its role in the formation of the Earth’s crust

The paper considers the morphology, deep structure, and geodynamic features of the Ural–Herirud postorogenic strike-slip fault (UH fault), along which the Moho (the “M”) shifts along the entire axial zone of the Ural Orogen, then further to the south across the Scythian–Turan Plate to the Herirud sublatitudinal fault in Afghanistan. The postcollisional character of dextral displacements along the Ural–Herirud fault and its Triassic–Jurassic age are proven. We have estimated the scale of displacements and made an attempt to make a paleoreconstruction, illustrating the relationship between the Variscides of the Urals and the Tien Shan before tectonic displacements. The analysis of new data includes the latest generation of 1: 200000 geological maps and the regional seismic profiling data obtained in the most elevated part of the Urals (from the seismic profile of the Middle Urals in the north to the Uralseis seismic profile in the south), as well as within the sedimentary cover of the Turan Plate, from Mugodzhary to the southern boundaries of the former water area of the Aral Sea. General typomorphic signs of transcontinental strike-slip fault systems are considered and the structural model of the Ural–Herirud postcollisional strike-slip fault is presented.     

The role of E–W basement faults in the Mesozoic geodynamic evolution of the Gafsa and Chotts basins,south-central Tunisia

The Gafsa and Chotts intracratonic basins in south-central Tunisia are transitional zones between the Atlasic domain to the north and the Saharan platform to the south. The principal aim of this paper is to unravel the geodynamic evolution of these basins following an integrated approach including seismic, well log and gravity data. These data are used to highlight the tectonic control on the deposition of Jurassic and Lower Cretaceous series and to discuss the role of the main faults that controlled the basin architecture and Cretaceous–Tertiary inversion. The horizontal gravity gradient map of the study area highlights the pattern of discontinuities within the two basins and reveals the presence of deep E–W basement faults. Primary attention is given to the role played by the E–W faults system and that of the NW–SE Gafsa fault which was previously considered active since the Jurassic. Facies and thickness analyses based on new seismic interpretation and well data suggest that the E–W-oriented faults controlled the subsidence distribution especially during the Jurassic. The NW–SE faults seem to be key structures that controlled the basins paleogeography during Late Cretaceous–Cenozoic time. The upper Triassic evaporite bodies, which locally outline the main NW–SE Gafsa fault, are regarded as intrusive salt bodies rather than early diapiric extrusions as previously interpreted since they are rare and occurred only along main strike-slip faults. In addition, seismic lines show that Triassic rocks are deep and do not exhibit true diapiric features.     

U–Pb age of detrital zircons from the Tekes River,Xinjiang, China,and implications for tectonomagmatic evolution of the South Tian Shan Orogen

The South Tian Shan, which is located along the southwestern margin of the Central Asian Orogenic Belt, is widely accepted as a collisional orogen between the Kazakhstan-Yili Block in the north and the Tarim Craton in the south, and the collision is thought to have occurred in either Late Paleozoic or Triassic. Regardless of the timing of the collision, the major magmatic events in the South Tian Shan Orogen should be related to subduction, collision and post-collision. We investigate this problem through U–Pb age of detrital zircons from the eastward-flowing Tekes River and its southern branches flowing through the northern slope of the Chinese South Tian Shan. A total of 500 analyses on 494 zircon grains from five sand samples yield an age range of 2590 to 268 Ma, but they are dominated by Paleozoic magmatic zircon grains, with some Precambrian population, but no Mesozoic and Cenozoic grains were detected. One of the samples from the Tekes River contains zircon grains from the Chinese South Tian Shan and other areas because the river receives its discharge from multiple sources. The other four samples were collected from four branches originating from the Chinese South Tian Shan only. From west to east, the sample from the Kayintemuzhate River shows two peak ages of 475 and 345 Ma, sample from the Muzhaerte (also called Xiate) River has peak ages of 422 and 290 Ma, sample from the Akeyazi River is characterized by a single peak age of 421 Ma, and sample from the Kekesu River shows a more complicated spectra with peak ages of 426, 398, 362, 327, and 285 Ma. When pooled together, the four samples yield four distinct age populations of 500–460, 450–390, 360–320, and 300–270 Ma, indicating the major magmatic events in the Chinese South Tian Shan. These results, combined with regional data, show an absence of Mesozoic magmatic events in the drainage areas of the Tekes River, and thus the South Tian Shan does not seem to be a Triassic orogen because of the lack of syn-collisional and post-collisional magmatism. The 300–270 magmatic event is thought to post-date the closure of the South Tian Shan Ocean, while the 360–320 and 450–390 Ma events were closely related to the northward subduction of the South Tian Shan Ocean. Our results strongly suggest a Late Carboniferous (320–300 Ma) collision between the Kazakhstan-Yili Block and the Tarim Craton. Possibly, the 500–460 Ma magmatism was related to subduction and closure of the Early Paleozoic Terskey Ocean.     

Rock pulverization and localization of a strike-slip fault zone in dolomite rocks (Salzach–Ennstal–Mariazell–Puchberg fault,Austria)

Detailed investigations of dolomite fault rocks, formed at shallow crustal depths along the Salzach–Ennstal–Mariazell–Puchberg (SEMP) fault system in the Northern Calcareous Alps, revealed new insights into cataclasite formation. The examined Miocene, sinistral strike-slip faults reveal grain size reduction of dolomite host rocks by tensile microfracturing at a large range of scales, producing rock fragments of centimetre to micrometre sizes. In situ fracturing leads to grain size reduction down to grain sizes <25 μm, producing mosaic breccias and fault rocks which have previously been described as “initial/embryonic” and “intermediate” cataclasites. At all scales, grain fragments display little to no rotation and no or minor evidence of shear deformation. The observed microstructures are similar to those previously described in studies on pulverized rocks. Microstructural investigations of cataclasites and mosaic breccias revealed aggregations of small dolomite grains (<50 μm) that accumulated on top of large fragments or as infillings of V-shaped voids between larger grains and show constant polarity throughout the investigated samples. Fabrics indicate deposition in formerly open pore space and subsequent polyphase cementation. The newly described tectonic geopetal fabrics (geopetal-particle-aggregates, GPA) prove that these faults temporarily passed through a stage of extremely high porosity/permeability prior to partial cementation.     

The role of water resources in the evolution of the Israeli–Lebanese border

The current location of the border between Lebanon and Palestine, today's Israel, is a product of various competing forces. The Zionist Organization aspired to include the entire Galilee region up to the lower reaches of the Litani River (also known as the Kassimiyah River) within Palestine. The river itself was the desired northern border of the country. The Zionists supported their position by employing instrumental arguments that were largely related to the availability of water resources. On the other hand, residents of the upper Galilee, today's southern Lebanon, demanded that they be included with Lebanon. They used their trade links with Beirut, and cultural and familial ties with other parts of Lebanon to support their position. These instrumental and expressive arguments appear to have assisted in the demarcation of the border between Lebanon and Palestine. Currently, access to the water resources, not necessarily control over them, is likely to influence negotiations between Israel and Lebanon over the future of the Israeli-occupied security zone in southern Lebanon.     

Structure and tectonic evolution of the Late Jurassic–Early Cretaceous Wandashan accretionary complex,NE China

The Late Jurassic–Early Cretaceous Wandashan accretionary complex (AC) in NE China is a key region for constraining the subduction and accretion of the Palaeo-Pacific Ocean; however, the protoliths and structure of the region remain poorly understood, resulting in debates regarding crustal growth mechanisms and subduction-related accretionary processes in Northeast China. In this contribution, we integrate detailed field observations, ocean plate stratigraphy (OPS) reconstruction, and associated geological data to determine the structure and tectonic evolution of the Wandashan AC. The Wandashan AC formed through the progressive incorporation of OPS units along an oceanic trench. The observed OPS comprises, in ascending order, Permian basalt and limestone, Middle Triassic–Early Jurassic chert, Middle Jurassic siliceous shale and mudstone, and Late Jurassic–Early Cretaceous turbidite. Numerous NNE–SSW-striking thrust faults have segmented the OPS into a series of bedding-parallel tectonic slices that were successively thrust over the Jiamusi massif along a basal thrust (the Yuejinshan Fault), producing a large-scale imbricate thrust system. The Wandashan AC underwent oceanward accretion via multiple deformational processes. The OPS units were detached and rearranged along or within a decollement through offscraping, underplating, thrusting, and duplexing. The units were then emplaced over the Jiamusi massif along the basal thrust. The timing of accretion and thrusting is constrained to the latest Middle Jurassic to earliest Early Cretaceous (ca. 167–131 Ma). Reconstructed accretion-related structural lines within the Wandashan AC trend dominantly NE–SW, close to the direction of Jurassic extension at the eastern Asian continental margin. Large-scale left-lateral strike-slip movement on the Dunmi Fault during the late Early Cretaceous resulted in the folding of structural lines within the Wandashan AC, producing their present-day westward-convex orientation.     

Crustal deformation effects on the chemical evolution of geothermal systems: the intra-arc Liquiñe–Ofqui fault system,Southern Andes

A better understanding of the chemical evolution of fluids in geothermal and hydrothermal systems requires data-based knowledge regarding the interplay between active tectonics and fluid flow. The Southern Andes volcanic zone is one of the best natural laboratories to address this issue because of the occurrence of numerous geothermal areas, recent seismic activity generated by regional fault systems, and intense volcanic activity. Geothermal systems have been understudied in this area, and limited scientific information exists about the role of local kinematic conditions on fluid flow and mineralization during the development and evolution of geothermal reservoirs. In this study, we provide data for a 1:200,000 scale geological and structural map of the Villarrica–Chihuio area as a setting in which to perform a structural analysis of active geothermal areas. This structural analysis, combined with geochemical modelling of hot spring data, allows the identification of two magmatic-tectonic-geothermal domains based on fault systems, volcanic activity, and lithologies. The Liquiñe–Ofqui fault system (LOFS) domain encompasses geothermal areas located either along the master or subsidiary faults. These are favourably orientated for shear and extension, respectively. In the LOFS domain, the geochemistry of hot spring discharges is controlled by interaction with the crystalline basement, and is characterized by low B/Cl conservative element ratios and high pH. In marked contrast, the arc-oblique long-lived fault systems (ALFS) domain includes geothermal occurrences located on the flanks of volcanoes forming WNW-trending alignments; these systems are built over faults that promote the development of crustal magma reservoirs. Unlike the first domain, the fluid chemistry of these geothermal discharges is strongly controlled by volcanic host rocks, and is typified by lower pH and higher B/Cl ratios. Reaction path modelling supports our model: chemical evolution of geothermal fluids in the Villarrica–Chihuio area is strongly dependent on structurally controlled mechanisms of heat transfer. Within this framework, heat transfer by conduction is responsible for the LOFS domain, whereas magmatically enhanced advective transport dominates heat flow in the ALFS domain. Although more studies are needed to constrain the complex interplay between tectonics and fluid flow, results from this study provide new insights towards efficient exploration strategies of geothermal resources in Southern Chile.     

Structural pattern and kinematic framework of deformation in the southern Nallamalai fold–fault belt,Cuddapah district,Andhra Pradesh,Southern India

An association of westerly verging asymmetric folds, easterly dipping cleavages and contractional faults control the pattern and intensity of structures at different scales in the southern Nallamalai fold–fault belt, Cuddapah district of Andhra Pradesh, Southern India. Variation in structural geometry is manifested across the section by the occurrence of relatively low amplitude folds, sometimes only a monocline and by the near absence of contractional faults in the WSW, but tight to isoclinal folds with frequent fold–fault interactions through the central areas towards ENE.The relationships of structural elements in terms of orientation, style, sense of movement and general vergence indicate their development under a progressive contractional deformation. The structures are interpreted to result from a combination of bulk inhomogeneous shortening across the belt and a top-to-west, variable simple shear. Localized developments of crenulation cleavage, rotation of cleavage in the shorter limbs of some mesoscale asymmetric folds and general variation of structural elements in morphology and associations across the belt, indicate partitioning of deformation and a varying degree of non-coaxiality in discrete domains of the bulk deformation.     

Mesozoic–Cenozoic Evolution and the Fault Kinematics of the Nurol Depression (Southern West Siberian Basin)

Doklady Earth Sciences - New fault kinematics data within the Archinsk field located in the Nurol depression (south&nbsp;part of the West Siberian Basin) are obtained by structural analysis of...     

U–Pb–Hf zircon study of two mylonitic granite complexes in the Talas-Fergana fault zone,Kyrgyzstan, and Ar–Ar age of deformations along the fault

A 2000 km long dextral Talas-Fergana strike–slip fault separates eastern terranes in the Kyrgyz Tien Shan from western terranes. The aim of this study was to constrain an age of dextral shearing in the central part of the fault utilizing Ar–Ar dating of micas. We also carried out a U–Pb–Hf zircon study of two different deformed granitoid complexes in the fault zone from which the micas for Ar dating were separated. Two samples of the oldest deformed Neoproterozoic granitoids in the area of study yielded U–Pb zircon SHRIMP ages 728 ± 11 Ma and 778 ± 11 Ma, characteristic for the Cryogenian Bolshoi Naryn Formation, and zircon grains analyzed for their Lu–Hf isotopic compositions yielded εHf(t) values from −11.43 to −16.73, and their calculated tHfc ages varied from 2.42 to 2.71 Ga. Thus varying Cryogenian ages and noticeable heterogeneity of Meso- to Paleoproterozoic crustal sources was established for mylonitic granites of the Bolshoi Naryn Formation. Two samples of mylonitized pegmatoidal granites of the Kyrgysh Complex yielded identical ²⁰⁶Pb/²³⁸U ages of 279 ± 5 Ma corresponding to the main peak of Late-Paleozoic post-collisional magmatism in the Tien Shan (Seltmann et al., 2011), and zircon grains analyzed for their Lu–Hf isotopic compositions yielded εHf(t) values from −11.43 to −16.73, and calculated tHfc ages from 2.42 to 2.71 Ga indicating derivation from a Paleoproterozoic crustal source. Microstructural studies showed that ductile/brittle deformation of pegmatoidal granites of the Kyrgysh Complex occurred at temperatures of 300–400 °C and caused resetting of the K–Ar isotope system of primary muscovite. Deformation of mylonitized granites of the Bolshoi Naryn Formation occurred under high temperature conditions and resulted in protracted growth and recrystallization of micas. The oldest Ar–Ar muscovite age of 241 Ma with a well defined plateau from a pegmatoidal granite of the Kyrgysh Complex is considered as a “minimum” age of dextral motions along this section of the fault in the Triassic while younger ages varying from 227 Ma to 199 Ma with typical staircase patterns indicate protracted growth and recrystallization of micas during ductile deformations which continued until the end of the Triassic.     

Late Quaternary evolution of the Gediz and Büyük Menderes grabens,Western Anatolia,Turkey

The Gediz and the Büyük Menderes Graben basins, two of the most important structural elements of western Anatolia, markedly differ in their palaeogeographic evolution during the Holocene. On the basis of the study of the facies and the geomorphological characteristics of the youngest sedimentary fills it is suggested that the evolution of the Büyük Menderes basin has a simple progradational history while the Gediz River basin has shown a complex evolution mainly controlled by intense tectonic periods. Comparison between the palaeogeographic evolution of these basins points to the fact that tectonism has been more effective in the Gediz basin during the Holocene.     

Jurassic formation and Eocene subduction of the Zermatt–Saas-Fee ophiolites: implications for the geodynamic evolution of the Central and Western Alps

The Zermatt–Saas-Fee ophiolites (ZSFO) are one of the best preserved slices of eclogitic oceanic crust in the Alpine chain. They formed during the opening of the Mesozoic Tethys and underwent subduction to HP/UHP conditions during Alpine compression. A cathodoluminescence-based ion microprobe (SHRIMP) dating of different zircon domains from metagabbros and oceanic metasediments was carried out to constrain the timing of formation and subduction of this ophiolite, two fundamental questions in Alpine geodynamics. The formation of the ophiolitic sequence is constrained by the intrusion ages of the Mellichen and the Allalin metagabbros (164.0 ± 2.7 Ma and 163.5 ± 1.8 Ma) obtained on magmatic zircon domains. These data are in line with the maximum deposition age for Mn-rich metasediments which overlie the mafic rocks at Lago di Cignana (161 ± 11 Ma) and at Sparrenflue (ca. 153–154 Ma). An Eocene age of 44.1 ± 0.7 Ma was obtained for whole zircons and zircon rims from an UHP eclogite and two metasediments at Lago di Cignana. One of the Eocene zircons contains a rutile inclusion indicating formation at HP conditions. As the temperature and pressure peak of these rocks nearly coincide, the Eocene zircons probably constrain the age for the deepest subduction of the ZSFO. This Eocene age for the UHP metamorphism implies that the ZSFO were subducted later than the Adriatic margin (Sesia-Lanzo Zone) and before the Late Eocene subduction of the European continental crust below Apulia. A scenario with three subduction episodes propagating in time from SE to NW is proposed for the geological evolution of the Central and Western Alps. Received: 1 December 1997 / Accepted: 8 April 1998     

The migmatite–gneiss complex of the Chuya–Kendyktas sialic massif (Southern Kazakhstan): Structure and age

A migmatite–gneiss complex made up of paraand orthogneisses and crystalline schists with bodies of ultrametagenic tonalites is distinguished in the basement of the northwestern part of the Chuya–Kendyktas Massif. ID-TIMS dating of accessory zircon from orthogneisses and ultrametagenic tonalites in combination with LA-ICP-MS analyses of detrital zircons from garnet–biotite paragneisses showed that the migmatite–gneiss complex was formed after protoliths with an age within 800–770 Ma and completed its evolution in the first half of the Neoproterozoic.     

Geochemical monitoring of clays for diagenetic evolution of the Paleozoic–Lower Mesozoic sequence in the northern Arabian plate: Hazro and Amanos regions,Southeastern Turkey

Clay minerals in the diagenetic/very low-grade metamorphic–sedimentary series from southeastern Anatolia in Turkey were analyzed to determine their mineralogical and chemical compositions. In the Amanos region, the lowermost unit is composed of metaclastics with primary clastic textures, as well as slaty cleavages and chlorite-mica stacks including volcanic rock intercalations. The Lower Cambrian is composed of mainly very low-grade metamorphic clastic rocks, while the Ordovician units have siliciclastic and carbonate rocks. In the Hazro region, the Late Silurian–Lower Triassic units are represented by highly diagenetic carbonate and clastic rocks. All of the rock units include illite. In addition, chlorite, mixed-layered illite–chlorite and chlorite–vermiculite are present in the Amanos region, while calcite, dolomite, kaolinite, mixed-layered illite–smectite (I–S) and glauconite occur in the Hazro region. The illites are characterized by the dominance of 2M₁ polytype in the Amanos samples; and 1M_d + 2M₁ in the Hazro samples. The I–S, glauconite and kaolin have R1 and R3, 1M and kaolinite polytypes, respectively. The illites have greater tetrahedral and lower octahedral substitutions than the I–S. Total trace element contents, elemental substitutions and chondrite-normalized trace element and REE values decrease toward illite–I–S–kaolinite. There are obvious fractionations for some major – trace and rare earth elements with respect to each other and clear enrichment with respect to the chondrite, with strong anomalies of positive for Gd and negative for P, K and Eu in the clay minerals. The textural, morphological and geochemical data indicate that kaolinite and I–S in the Hazro area occur in supergene conditions with due to a full neoformation mechanism, whereas illites in the Amanos region represent the hypogene origin. In brief, the K₂O contents, ratios of Eu/Eu^* and La_N/Lu_N and δ¹⁸O and δD values of I–S and illite exhibit notable relationships with increasing diagenetic/metamorphic grade.     

Late Paleozoic–Mesozoic tectonic evolution of the Trans-Altai and South Gobi Zones in southern Mongolia based on structural and geochronological data

The Trans-Altai Zone in southern Mongolia is characterized by thrusting of greenschist-facies Silurian oceanic rocks over Devonian and Lower Carboniferous volcano-sedimentary sequences, by E–W directed folding affecting the early Carboniferous volcanic rocks, and by the development of N–S trending magmatic fabrics in the Devonian–Carboniferous arc plutons. This structural pattern is interpreted as the result of early Carboniferous thick-skinned E–W directed nappe stacking of oceanic crust associated with syn-compressional emplacement of a magmatic arc. The southernmost South Gobi Zone represents a Proterozoic continental domain affected by shallow crustal greenschist-facies detachments of Ordovician and Devonian cover sequences from the Proterozoic substratum, whereas supracrustal Carboniferous volcanic rocks and Permian sediments were folded into N–S upright folds. This structural pattern implies E–W directed thin-skinned tectonics operating from the late Carboniferous to the Permian, as demonstrated by K–Ar ages ranging from ~ 320 Ma to 257 Ma for clay fractions separated from a variety of rock types. Moreover, the geographical distribution of granitoids combined with their geochemistry and SHRIMP U–Pb zircon ages form distinct groups of Carboniferous and Permian age that record typical processes of magma generation and increase in crustal thickness. The field observations combined with clay ages, the geochemical characteristics of the granitoids and their ages imply that the E–W trending zone affected by tectonism migrated southwards, leaving the Trans Altai Zone inactive during the late Carboniferous and Permian, suggesting that the two units were tectonically amalgamated along a major E–W trending strike slip fault zone. This event was related to late Carboniferous subduction that was responsible for the vast volume of granitoid magma emplaced at 300–305 Ma in the South Gobi and at 307–308 Ma in the Trans-Altai Zones. The formation and growth of the crust was initially due only to subduction and accretion processes. During the post-collisional period from 305 to 290 Ma the addition of heat to the crust led to the generation of (per-) alkaline melts. Once amalgamated, these two different crustal domains were affected by N–S compression during the Triassic and early Jurassic (185–173 Ma), resulting in E–W refolding of early thrusts and folds and major shortening of both tectonic zones.     

Source Provenance and Paleogeographic Conditions during Deposition of Jurassic Continental Sediments in the Southern Part of the Siberian Platform (Implication of Sm–Nd and U–Pb Data)

The first Sm–Nd isotopic data and U–Pb (LA–ICP–MS) detrital zircon ages from sandstones of the Prisayan and Kuda Formations (the Irkutsk Basin, southern part of the Siberian Platform) have been obtained. They demonstrate that during accumulation of the sediments in the Irkutsk Basin, the contribution of local erosion sources decreased over time, while input from the Paleo–Transbaikalia sources increased. The change in provenance areas was triggered by tectonic rebuilding in Paleo–Transbaikalia caused by the closure of the Mongol–Okhotsk Ocean.     

The role of gravitational collapse in controlling the evolution of crestal fault systems (Espírito Santo Basin,SE Brazil)

A high-quality 3D seismic volume from offshore Espírito Santo Basin (SE Brazil) is used to assess the importance of gravitational collapse to the formation of crestal faults above salt structures. A crestal fault system is imaged in detail using seismic attributes such as curvature and variance, which are later complemented by analyses of throw vs. distance (T-D) and throw vs. depth (T-Z). In the study area, crestal faults comprise closely spaced arrays and are bounded by large listric faults, herein called border faults. Two episodes of growth are identified in two opposite-dipping fault families separated by a transverse accommodation zone. Statistical analyses for eighty-four (84) faults show that fault spacing is < 250 m, with border faults showing the larger throw values. Fault throw varies between 8 ms and 80 ms two-way time for crestal faults, and 60–80 ms two-way time for border faults. Fault length varies between ∼410 m and 1750 m, with border faults ranging from 1250 m to 1750 m. This work shows that border faults accommodated most of the strain associated with salt growth and collapse. The growth history of crestal faults favours an isolated fault propagation model with fault segment linkage being associated with the lateral propagation of discrete fault segments. Importantly, two episodes of fault growth are identified as synchronous to two phases of seafloor erosion, rendering local unconformities as competent markers of fault reactivation at a local scale. This paper has crucial implications for the understanding of fault growth as a means to assess drilling risk and oil and gas migration on continental margins. As a corollary, this work demonstrates that: 1) a certain degree of spatial organisation occurs in crestal fault systems; 2) transverse accommodation zones can form regions in which fault propagation is enhanced and regional dips of faults change in 4D.