Catastrophic disruption of pre-shattered parent bodies

In this paper, we analyze the effect of the internal structure of a parent body on its fragment properties following its disruption in different impact energy regimes. To simulate an asteroid breakup, we use the same numerical procedure as in our previous studies, i.e., a 3D SPH hydrocode to compute the fragmentation phase and the parallel N-body code pkdgrav to compute the subsequent gravitational re-accumulation phase. To explore the importance of the internal structure in determining the collisional outcome, we consider two different parent body models: (1) a purely monolithic one and (2) a pre-shattered one which consists of several fragments separated by damaged zones and small voids. We present here simulations spanning two different impact energy regimes—barely disruptive and highly catastrophic—corresponding to the formation of the Eunomia and Koronis families, respectively. As we already found for the intermediate energy regime represented by the Karin family, pre-shattered parent bodies always lead to outcome properties in better agreement with those of real families. In particular, the fragment size distribution obtained by disrupting a monolithic body always contains a large gap between the largest fragment and the next largest ones, whereas it is much more continuous in the case of a pre-shattered parent body. In the latter case, the ejection speeds of large fragments are also higher and a smaller impact energy is generally required to achieve a similar degree of disruption. Hence, unless the internal structure of bodies involved in a collision is known, predicting accurately the outcome is impossible. Interestingly, disrupting a pre-shattered parent body to reproduce the Koronis family yields a fragment size distribution characterized by four almost identical largest objects, as observed in the real family. This peculiar outcome has been found before in laboratory experiments but is obtained for the first time following gravitational re-accumulation. Finally, we show that material belonging to the largest fragments of a family originates from well-defined regions inside the parent body (the extent and location of which are dependent upon internal structure), despite the many gravitational interactions that occur during the re-accumulation process. Hence fragment formation does not proceed stochastically but results directly from the velocity field imparted during the impact.     

The Asteroid Veritas: An intruder in a family named after it?

The Veritas family is located in the outer main belt and is named after its apparent largest constituent, Asteroid (490) Veritas. The family age has been estimated by two independent studies to be quite young, around 8 Myr. Therefore, current properties of the family may retain signatures of the catastrophic disruption event that formed the family. In this paper, we report on our investigation of the formation of the Veritas family via numerical simulations of catastrophic disruption of a 140-km-diameter parent body, which was considered to be made of either porous or non-porous material, and a projectile impacting at 3 or 5 km/s with an impact angle of 0° or 45°. Not one of these simulations was able to produce satisfactorily the estimated size distribution of real family members. Based on previous studies devoted to either the dynamics or the spectral properties of the Veritas family, which already treated (490) Veritas as a special object that may be disconnected from the family, we simulated the formation of a family consisting of all members except that asteroid. For that case, the parent body was smaller (112 km in diameter), and we found a remarkable match between the simulation outcome, using a porous parent body, and the real family. Both the size distribution and the velocity dispersion of the real reduced family are very well reproduced. On the other hand, the disruption of a non-porous parent body does not reproduce the observed properties very well. This is consistent with the spectral C-type of family members, which suggests that the parent body was porous and shows the importance of modeling the effect of this porosity in the fragmentation process, even if the largest members are produced by gravitational reaccumulation during the subsequent gravitational phase. As a result of our investigations, we conclude that it is very likely that the Asteroid (490) Veritas and probably several other small members do not belong to the family as originally defined, and that the definition of this family should be revised. Further investigations will be performed to better constrain the definitions and properties of other asteroid families of different types, using the appropriate model of fragmentation. The identification of very young families in turn will continue to serve as a tool to check the validity of numerical models.     

Combined effect of YORP and collisions on the rotation rate of small Main Belt asteroids

The rotation rate distribution of small Main Belt asteroids is dominated by YORP and collisions. These mechanism act differently depending on the size of the bodies and give rise to non-linear effects when they both operate. Using a Monte Carlo method we model the formation of a steady state population of small asteroids under the influence of both mechanisms and the rotation rate distribution is compared to the observed one as derived from Pravec et al. (Pravec, P. et al. [2008]. Icarus 197, 497-504). A better match to observations is obtained with respect to the case in which only YORP is considered. In particular, an excess of slow rotators is produced in the model with both collisions and YORP because bodies driven to slow rotation by YORP have a random walk-like evolution of the spin induced by repeated collisions with small projectiles. This is a dynamical evolution different from tumbling and it lasts until a large impact takes the body to a faster rotation rate. According to our model, the rotational fission of small asteroids is a very frequent event and might explain objects like P/2010 A2 and its associated tail of millimeter-sized dust particles. The mass loss during fission of small asteroids might significantly influence the overall collisional evolution of the belt. Fission can in fact be considered as an additional erosion mechanism, besides cratering and fragmentation, acting only at small diameters.     

Catastrophic disruption of asteroids and family formation: a review of numerical simulations including both fragmentation and gravitational reaccumulations

In the last few years, thanks to the development of sophisticated numerical codes, a major breakthrough has been achieved in our understanding of the processes involved in small body collisions. In this review, we summarize the most recent results provided by numerical simulations, accounting for both the fragmentation of an asteroid and the gravitational interactions of the generated fragments. These studies have greatly improved our knowledge of the mechanisms that are at the origin of some observed features in the asteroid belt. In particular, the simulations have demonstrated that, for bodies larger than several kilometers, the collisional process not only involves the fragmentation of the asteroid but also the gravitational interactions between the ejected fragments. This latter mechanism can lead to the formation of large aggregates by gravitational reaccumulation of smaller fragments, and helps explain the presence of large members within asteroid families. Numerical simulations of the complete process have thus reproduced successfully for the first time the main properties of asteroid families, each formed by the disruption of a large parent body, and provided information on the possible internal structure of the parent bodies. A large amount of work remains necessary, however, to understand in deeper detail the physical process as a function of material properties and internal structures that are relevant to asteroids, and to determine in a more quantitative way the outcome properties such as fragment shapes and rotational states.     

The shallow magnitude distribution of asteroid families

It is well known that asteroid families have steeper absolute magnitude (H) distributions for H < 12-13 values than the background population. Beyond this threshold, the shapes of the absolute magnitude distributions in the family/background populations are difficult to determine, primarily because both populations are not yet observationally complete. Using a recently generated catalog containing the proper elements of 106,284 main belt asteroids and an innovative approach, we debiased the absolute magnitude distribution of the major asteroid families relative to the local background populations. Our results indicate that the magnitude distributions of asteroid families are generally not steeper than those of the local background populations for H > 13 (i.e., roughly for diameters smaller than 10 km). In particular, most families have shallower magnitude distributions than the background in the range 15-17 mag. Thus, we conclude that, contrary to previous speculations, the population of kilometer-size asteroids in the main belt is dominated by background bodies rather than by members of the most prominent asteroid families. We believe this result explains why the Spacewatch, Sloan Digital Sky Survey, and Subaru asteroid surveys all derived a shallow magnitude distribution for the dimmer members of the main belt population.We speculate on a few dynamical and collisional scenarios that can explain this shallow distribution. One possibility is that the original magnitude distributions of the families (i.e., at the moment of the formation event) were very shallow for H larger than ∼ 13, and that most families have not yet had the time to collisionally evolve to the equilibrium magnitude distribution that presumably characterizes the background population. A second possibility is that family members smaller than about 10 km, eroded over time by collisional and dynamical processes, have not yet been repopulated by the break-up of larger family members. For this same reason, the older (and possibly characterized by a weaker impact strength) background population shows a shallow distribution in the range 15-60 km.     

Dynamics of the Hungaria asteroids

To try to understand the dynamical and collisional evolution of the Hungaria asteroids we have built a large catalog of accurate synthetic proper elements. Using the distribution of the Hungaria, in the spaces of proper elements and of proper frequencies, we can study the dynamical boundaries and the internal structure of the Hungaria region, both within a purely gravitational model and also showing the signature of the non-gravitational effects. We find a complex interaction between secular resonances, mean motion resonances, chaotic behavior and Yarkovsky-driven drift in semimajor axis. We also find a rare occurrence of large scale instabilities, leading to escape from the region. This allows to explain the complex shape of a grouping which we suggest is a collisional family, including most Hungaria but by no means all; we provide an explicit list of non-members of the family. There are finer structures, of which the most significant is a set of very close asteroid couples, with extremely similar proper elements. Some of these could have had, in a comparatively recent past, very close approaches with low relative velocity. We argue that the Hungaria, because of the favorable observing conditions, may soon become the best known sub-group of the asteroid population.     

The origin of Vesta’s crust: Insights from spectroscopy of the Vestoids

High quality VNIR spectra of 15 Vestoids, small asteroids that are believed to originate from Vesta, were collected and compared to laboratory spectra and compositional data for selected HED meteorites. A combination of spectral parameters such as band centers, and factors derived from Modified Gaussian Model fits (band centers, band strengths, calculation of the low to high-Ca pyroxene ratio) were used to establish if each Vestoid appeared most like eucrite or diogenite material, or a mixture of the two (howardite). This resulted in the identification of the first asteroid with a ferroan diogenite composition, 2511 Patterson. This asteroid can be used to constrain the size of diogenite magma chambers within the crust of Vesta. The Vestoids indicate that both large-scale homogeneous units (>5 km) and smaller-scale heterogeneity (<1 km) exist on the surface of Vesta, as both monomineralogic (eucrite or diogenite material alone) and mixed (both eucrite and diogenite) spectra are observed. The small-scale of the variation observed within the Vestoid population is predicted by the partial melting model, which has multiple intrusions penetrating into the crust of Vesta. It is much more difficult to reconcile the observations here with the magma ocean model, which would predict much more homogeneous layers on a large-scale both at the surface and with depth.     

The shape distribution of asteroid families: Evidence for evolution driven by small impacts

A statistical analysis of brightness variability of asteroids reveals how their shapes evolve from elongated to rough spheroidal forms, presumably driven by impact-related phenomena. Based on the Sloan Digital Sky Survey Moving Object Catalog, we determined the shape distribution of 11,735 asteroids, with special emphasis on eight prominent asteroid families. In young families, asteroids have a wide range of shape elongations, implying fragmentation-formation. In older families we see an increasing number of rough spheroids, in agreement with the predictions of an impact-driven evolution. Old families also contain a group of moderately elongated members, which we suggest correspond to higher-density, more impact-resistant cores of former fragmented asteroids that have undergone slow shape erosion. A few percent of asteroids have very elongated shapes, and can either be young fragments or tidally reshaped bodies. Our results confirm that the majority of asteroids are gravitationally bound “rubble piles.”     

Chemical and mineralogical size segregation in the impact disruption of inhomogeneous, anhydrous meteorites

We performed impact disruption experiments on pieces from eight different anhydrous chondritic meteorites—four weathered ordinary chondrite finds from North Africa (NWA791, NWA620, NWA869 and MOR001), three almost unweathered ordinary chondrite falls (Mbale, Gao, and Saratov), and an almost unweathered carbonaceous chondrite fall (Allende). In each case the impactor was a small (1/8 or 1/4 in) aluminum sphere fired at the meteorite target at , comparable to the mean collision speed in the main-belt. Some of the ∼5 to debris from each disruption was collected in aerogel capture cells, and the captured particles were analyzed by in situ synchrotron-based X-ray fluorescence. For each meteorite, many of the smallest particles ( up to in size, depending on the meteorite) exhibit very high Ni/Fe ratios compared to the Ni/Fe ratios measured in the larger particles , a composition consistent with the smallest debris being dominated by matrix material while the larger debris is dominated by fragments from olivine chondrules. These results may explain why the interplanetary dust particles (IDPs) collected from the Earth's stratosphere are C-rich and volatile-rich compared to the presumed solar nebula composition. The IDPs may simply sample the matrix of an inhomogeneous parent body, structurally and mineralogically similar to the chondritic meteorites, which are inhomogeneous assemblages of compact, strong, C- and volatile-poor chondrules that are distributed in a more porous, C- and volatile-rich matrix. In addition, these results may explain why the micrometeorites, which are to millimeters in size, recovered from the polar ices are Ni- and S-poor compared to chondritic meteorites, since these polar micrometeorites may preferentially sample fragments from the Ni- and S-poor olivine chondrules. These results indicate that the average composition of the IDPs may be biased towards the composition of the matrix of the parent body while the average composition of the polar micrometeorites may be more heavily weighted towards the composition of the chondrules and clasts. Thus, neither the IDPs nor the polar micrometeorites may sample the bulk composition of their respective parent bodies.We determined the threshold collisional specific energy for these chondritic meteorites to be 1419 J/kg, about twice the value for terrestrial basalt. Comparison of the mass of the largest fragment produced in the disruption of an sample of the porous ordinary chondrite Saratov with the largest fragment produced in the disruption of an sample of the compact ordinary chondrite MOR001 when each was struck by an impactor having approximately the same kinetic energy confirms that it requires significantly more energy to disrupt a porous target than a non-porous target.These results may also have important implications for the design of spacecraft missions intended to sample the composition and mineralogy of the chondritic asteroids and other inhomogeneous bodies. A Stardust-like spacecraft intended to sample asteroids by collecting only the small debris from a man-made impact onto the asteroid may collect particles that over-sample the matrix of the target and do not provide a representative sample of the bulk composition. The impact collection technique to be employed by the Japanese HAYABUSA (formerly MUSES-C) spacecraft to sample the asteroid Itokawa may result in similar mineral segregation.     

The fossilized size distribution of the main asteroid belt

Planet formation models suggest the primordial main belt experienced a short but intense period of collisional evolution shortly after the formation of planetary embryos. This period is believed to have lasted until Jupiter reached its full size, when dynamical processes (e.g., sweeping resonances, excitation via planetary embryos) ejected most planetesimals from the main belt zone. The few planetesimals left behind continued to undergo comminution at a reduced rate until the present day. We investigated how this scenario affects the main belt size distribution over Solar System history using a collisional evolution model (CoEM) that accounts for these events. CoEM does not explicitly include results from dynamical models, but instead treats the unknown size of the primordial main belt and the nature/timing of its dynamical depletion using innovative but approximate methods. Model constraints were provided by the observed size frequency distribution of the asteroid belt, the observed population of asteroid families, the cratered surface of differentiated Asteroid (4) Vesta, and the relatively constant crater production rate of the Earth and Moon over the last 3 Gyr. Using CoEM, we solved for both the shape of the initial main belt size distribution after accretion and the asteroid disruption scaling law . In contrast to previous efforts, we find our derived function is very similar to results produced by numerical hydrocode simulations of asteroid impacts. Our best fit results suggest the asteroid belt experienced as much comminution over its early history as it has since it reached its low-mass state approximately 3.9-4.5 Ga. These results suggest the main belt's wavy-shaped size-frequency distribution is a “fossil” from this violent early epoch. We find that most diameter D?120 km asteroids are primordial, with their physical properties likely determined during the accretion epoch. Conversely, most smaller asteroids are byproducts of fragmentation events. The observed changes in the asteroid spin rate and lightcurve distributions near D∼100-120 km are likely to be a byproduct of this difference. Estimates based on our results imply the primordial main belt population (in the form of D<1000 km bodies) was 150-250 times larger than it is today, in agreement with recent dynamical simulations.     

Numerical simulations of impacts involving porous bodies: II. Comparison with laboratory experiments

In this paper, we compare the outcome of high-velocity impact experiments on porous targets, composed of pumice, with the results of simulations by a 3D SPH hydrocode in which a porosity model has been implemented. The different populations of small bodies of our Solar System are believed to be composed, at least partially, of objects with a high degree of porosity. To describe the fragmentation of such porous objects, a different model is needed than that used for non-porous bodies. In the case of porous bodies, the impact process is not only driven by the presence of cracks which propagate when a stress threshold is reached, it is also influenced by the crushing of pores and compaction. Such processes can greatly affect the whole body's response to an impact. Therefore, another physical model is necessary to improve our understanding of the collisional process involving porous bodies. Such a model has been developed recently and introduced successfully in a 3D SPH hydrocode [Jutzi, M., Benz, W., Michel, P., 2008. Icarus 198, 242-255]. Basic tests have been performed which already showed that it is implemented in a consistent way and that theoretical solutions are well reproduced. However, its full validation requires that it is also capable of reproducing the results of real laboratory impact experiments. Here we present simulations of laboratory experiments on pumice targets for which several of the main material properties have been measured. We show that using the measured material properties and keeping the remaining free parameters fixed, our numerical model is able to reproduce the outcome of these experiments carried out under different impact conditions. This first complete validation of our model, which will be tested for other porous materials in the future, allows us to start addressing problems at larger scale related to small bodies of our Solar System, such as collisions in the Kuiper Belt or the formation of a family by the disruption of a porous parent body in the main asteroid belt.     

The formation of asteroid satellites in large impacts: results from numerical simulations

We present results of 161 numerical simulations of impacts into 100-km diameter asteroids, examining debris trajectories to search for the formation of bound satellite systems. Our simulations utilize a 3-dimensional smooth-particle hydrodynamics (SPH) code to model the impact between the colliding asteroids. The outcomes of the SPH models are handed off as the initial conditions for N-body simulations, which follow the trajectories of the ejecta fragments to search for the formation of satellite systems. Our results show that catastrophic and large-scale cratering collisions create numerous fragments whose trajectories can be changed by particle-particle interactions and by the reaccretion of material onto the remaining target body. Some impact debris can enter into orbit around the remaining target body, which is a gravitationally reaccreted rubble pile, to form a SMAshed Target Satellite (SMATS). Numerous smaller fragments escaping the largest remnant may have similar trajectories such that many become bound to one another, forming Escaping Ejecta Binaries (EEBs). Our simulations so far seem to be able to produce satellite systems qualitatively similar to observed systems in the main asteroid belt. We find that impacts of 34-km diameter projectiles striking at 3 km s⁻¹ at impact angles of ∼30° appear to be particularly efficient at producing relatively large satellites around the largest remnant as well as large numbers of modest-size binaries among their escaping ejecta.     

The formation of asteroid satellites in large impacts: results from numerical simulations

We present results of 161 numerical simulations of impacts into 100-km diameter asteroids, examining debris trajectories to search for the formation of bound satellite systems. Our simulations utilize a 3-dimensional smooth-particle hydrodynamics (SPH) code to model the impact between the colliding asteroids. The outcomes of the SPH models are handed off as the initial conditions for N-body simulations, which follow the trajectories of the ejecta fragments to search for the formation of satellite systems. Our results show that catastrophic and large-scale cratering collisions create numerous fragments whose trajectories can be changed by particle-particle interactions and by the reaccretion of material onto the remaining target body. Some impact debris can enter into orbit around the remaining target body, which is a gravitationally reaccreted rubble pile, to form a SMAshed Target Satellite (SMATS). Numerous smaller fragments escaping the largest remnant may have similar trajectories such that many become bound to one another, forming Escaping Ejecta Binaries (EEBs). Our simulations so far seem to be able to produce satellite systems qualitatively similar to observed systems in the main asteroid belt. We find that impacts of 34-km diameter projectiles striking at 3 km s⁻¹ at impact angles of ∼30° appear to be particularly efficient at producing relatively large satellites around the largest remnant as well as large numbers of modest-size binaries among their escaping ejecta.     

Experimental study on the impact fragmentation of core-mantle bodies: Implications for collisional disruption of rocky planetesimals with sintered core covered with porous mantle

Impact experiments of inhomogeneous targets such as layered bodies consisting of a dense core and porous mantle were conducted to clarify the effect of the layered structure on impact strength. The layered structure of small bodies could be the result of the thermal evolution of planetesimals in the solar nebula. So, the impact disruption of thermally evolved bodies with core-mantle structure is important for the origin of small bodies such as asteroids. We investigated the impact strength of rocky-layered bodies with porous mantle-sintered cores, which could be formed at an initial stage of thermal evolution. Spherical targets composed of soda-lime glass or quartz core and porous gypsum mantle were prepared as an analog of small bodies with a core-mantle structure, and the internal structure was changed. A nylon projectile was impacted at the impact velocity from 1 to 5 km/s. The impact strength of the core-mantle targets decreases with the increase of the core/target mass ratio (RCM) in the specific energy range from 1×¹⁰³ to 4×¹⁰⁴ J/kg. We observed two distinct destruction modes characterized by the damage to the core: one shows a damaged core and fractured mantle, and the other shows an intact core and broken mantle. The former mode was usually observed with increasing RCM, and the boundary condition of the core destruction () was experimentally found to be , where is the specific energy required to disrupt a glass core. From this empirical equation, it might be possible to discuss the destruction conditions of a thermally evolved body with a porous mantle-sintered core structure. We speculate that the impact strength of the body could be significantly reduced with the progress of internal evolution at the initial stage of thermal evolution.     

Impact cratering and break up of the small bodies of the Solar System

We consider the largest impact craters observed on small satellites and asteroids and the impact disruption of such bodies. Observational data are considered from 21 impact-like structures on 13 satellites and 8 asteroids (target body radii in the range 0.7-265 km). If the radius of the target body is R and the diameter of the largest crater observed on this body D, the ratio D/R is then the main observational parameter of interest. This is found on the observed bodies and compared to data obtained in the laboratory. Taking the largest observed value for D/R as a proxy for the ratio Dc/R (where Dc is the diameter of the largest crater that can be formed on a body without shattering it) it was found that for the observed icy satellites Dc,icy≈1.2R and for the asteroids and the rocky satellites Dc,rocky≈1.6R. In laboratory experiments with ice targets at impactor speeds of 1 to 3 km s⁻¹ we obtained Dc,icy≈1.64R.     

Size-frequency distributions of fragments from SPH/N-body simulations of asteroid impacts: Comparison with observed asteroid families

We investigate the morphology of size-frequency distributions (SFDs) resulting from impacts into 100-km-diameter parent asteroids, represented by a suite of 161 SPH/N-body simulations conducted to study asteroid satellite formation [Durda, D.D., Bottke, W.F., Enke, B.L., Merline, W.J., Asphaug, E., Richardson, D.C., Leinhardt, Z.M., 2004. Icarus 170, 243-257]. The spherical basalt projectiles range in diameter from 10 to 46 km (in equally spaced mass increments in logarithmic space, covering six discrete sizes), impact speeds range from 2.5 to 7 km/s (generally in 1 km/s increments), and impact angles range from 15° to 75° (nearly head-on to very oblique) in 15° increments. These modeled SFD morphologies match very well the observed SFDs of many known asteroid families. We use these modeled SFDs to scale to targets both larger and smaller than 100 km in order to gain insights into the circumstances of the impacts that formed these families. Some discrepancies occur for families with parent bodies smaller than a few tens of kilometers in diameter (e.g., 832 Karin), however, so due caution should be used in applying our results to such small families. We find that ∼20 observed main-belt asteroid families are produced by the catastrophic disruption of D>100 km parent bodies. Using these data as constraints, collisional modeling work [Bottke Jr., W.F., Durda, D.D., Nesvorný, D., Jedicke, R., Morbidelli, A., Vokrouhlický, D., Levison, H.F., 2005b. Icarus 179, 63-94] suggests that the threshold specific energy, , needed to eject 50% of the target body's mass is very close to that predicted by Benz and Asphaug [Benz, W., Asphaug, E., 1999. Icarus 142, 5-20].     

Mass dispersal and angular momentum transfer during collisions between rubble-pile asteroids. II. Effects of initial rotation and spin-down through disruptive collisions

Expanding on our previous N-body simulation of impacts between initially non-rotating rubble-pile objects [Takeda, T., Ohtsuki, K., 2007. Icarus 189, 256-273], we examine effects of initial rotation of targets on mass dispersal and change of spin rates. Numerical results show that the collisional energy needed to disrupt a rubble-pile object is not sensitive to initial rotation of the target, in most of the parameter range studied in our simulations. We find that initial rotation of targets is slowed down through disruptive impacts for a wide range of parameters. The spin-down is caused by escape of high-velocity ejecta and asymmetric re-accumulation of fragments. When these effects are significant, rotation is slowed down even when the angular momentum added by an impactor is in the same direction as the initial rotation of the target. Spin-down is most efficient when the impact occurs in the equatorial plane of the target, because in this case most of the ejected fragments originate from the equatorial region of the target and a significant amount of angular momentum can be easily removed. In the case of impacts from directions inclined relative to the target's equatorial plane, spin-down still occurs with reduced degree, unless impacts occur onto the pole region from the vertical direction. Our results suggest that such spin-down through disruptive impacts may have played an important role in spin evolution of asteroids through collisions in the gravity-dominated regime.     

Asteroid (21) Lutetia as a remnant of Earth’s precursor planetesimals

Isotopic and chemical compositions of meteorites, coupled with dynamical simulations, suggest that the main belt of asteroids between Mars and Jupiter contains objects formed in situ as well as a population of interlopers. These interlopers are predicted to include the building blocks of the terrestrial planets as well as objects that formed beyond Neptune ( [Bottke et al., 2006] , [Levison et al., 2009] and [Walsh et al., 2011] ). Here we report that the main belt asteroid (21) Lutetia – encountered by the Rosetta spacecraft in July 2010 – has spectral (from 0.3 to 25 μm) and physical (albedo, density) properties quantitatively similar to the class of meteorites known as enstatite chondrites. The chemical and isotopic compositions of these chondrites indicate that they were an important component of the formation of Earth and other terrestrial planets. This meteoritic association implies that Lutetia is a member of a small population of planetesimals that formed in the terrestrial planet region and that has been scattered in the main belt by emerging protoplanets (Bottke et al. 2006) and/or by the migration of Jupiter (Walsh et al. 2011) early in its history. Lutetia, along with a few other main-belt asteroids, may contains part of the long-sought precursor material (or closely related materials) from which the terrestrial planets accreted.     

The composition of M-type asteroids: Synthesis of spectroscopic and radar observations

We have conducted a radar-driven observational campaign of 22 main-belt asteroids (MBAs) focused on Bus–DeMeo Xc- and Xk-type objects (Tholen X and M class asteroids) using the Arecibo radar and NASA Infrared Telescope Facilities (IRTF). Sixteen of our targets were near-simultaneously observed with radar and those observations are described in a companion paper (Shepard, M.K., and 19 colleagues [2010]. Icarus, in press). We find that most of the highest metal-content asteroids, as suggested by radar, tend to exhibit silicate absorption features at both 0.9 and 1.9 μm, and the lowest metal-content asteroids tend to exhibit either no bands or only the 0.9 μm band. Eleven of the asteroids were observed at several rotational longitudes in the near-infrared and significant variations in continuum slope were found for nine in the spectral regions 1.1–1.45 μm and 1.6–2.3 μm. We utilized visible wavelength data (Bus, S.J., Binzel, R.P. [2002b]. Icarus 158, 146–177; Fornasier, S., Clark, B.E., Dotto, E., Migliorini, A., Ockert-Bell, M., Barucci, M.A. [2010]. Icarus 210, 655–673.) for a more complete compositional analysis of our targets. Compositional evidence is derived from our target asteroid spectra using two different methods: (1) a χ² search for spectral matches in the RELAB database, and (2) parametric comparisons with meteorites. This paper synthesizes the results of the RELAB search and the parametric comparisons with compositional suggestions based on radar observations. We find that for six of the seven asteroids with the highest iron abundances, our spectral results are consistent with the radar evidence (16 Psyche, 216 Kleopatra, 347 Pariana, 758 Mancunia, 779 Nina, and 785 Zwetana). Three of the seven asteroids with the lowest metal abundances, our spectral results are consistent with the radar evidence (21 Lutetia, 135 Hertha, 497 Iva). The remaining seven asteroids (22 Kalliope, 97 Klotho, 110 Lydia, 129 Antigone, 224 Oceana, 678 Fredegundis, and 771 Libera) have ambiguous compositional interpretations when comparing the spectral analogs to the radar analogs. The number of objects with ambiguous results from this multi-wavelength survey using visible, near-infrared, and radar wavelengths indicates that perhaps a third diagnostic wavelength region (such as the mid-infrared around 2–4 μm, the mid-infrared around 10–15 μm, and/or the ultraviolet around 0.2–0.4 μm) should be explored to resolve the discrepancies.