Mercury’s magnetospheric magnetic field after the first two MESSENGER flybys

The “paraboloid” model of Mercury’s magnetospheric magnetic field is used to determine the best-fit magnetospheric current system and internal dipole parameters from magnetic field measurements taken during the first and second MESSENGER flybys of Mercury on 14 January and 6 October 2008. Together with magnetic field measurements taken during the Mariner 10 flybys on 29 March 1974 and 16 March 1975, there exist three low-latitude traversals separated in longitude and one high-latitude encounter. From our model formulation and fitting procedure a Mercury dipole moment of 196 nT ·  (where R_M is Mercury’s radius) was determined. The dipole is offset from Mercury’s center by 405 km in the northward direction. The dipole inclination to Mercury’s rotation axis is relatively small, ∼4°, with an eastern longitude of 193° for the dipole northern pole. Our model is based on the a priori assumption that the dipole position and the moment orientation and strength do not change in time. The root mean square (rms) deviation between the Mariner 10 and MESSENGER magnetic field measurements and the predictions of our model for all four flybys is 10.7 nT. For each magnetic field component the rms residual is ∼6 nT or about 1.5% of the maximum measured magnetic field, ∼400 nT. This level of agreement is possible only because the magnetospheric current system parameters have been determined separately for each flyby. The magnetospheric stand-off distance, the distance from the planet’s center to the inner edge of the tail current sheet, the tail lobe magnetic flux, and the displacement of the tail current sheet relative to the Mercury solar-magnetospheric equatorial plane have been determined independently for each flyby. The magnetic flux in the tail lobes varied from 3.8 to 5.9 MWb; the subsolar magnetopause stand-off distance from 1.28 to 1.43 R_M; and the distance to the inner edge of the current sheet from 1.23 to 1.32 R_M. The differences in the current systems between the first and second MESSENGER flybys are attributed to the effects of strong magnetic reconnection driven by southward interplanetary magnetic field during the latter flyby.     

Alfven Wave Reflection model of field-aligned currents at Mercury

An Alfven Wave Reflection (AWR) model is proposed that provides closure for strong field-aligned currents (FACs) driven by the magnetopause reconnection in the magnetospheres of planets having no significant ionospheric and surface electrical conductance. The model is based on properties of the Alfven waves, generated at high altitudes and reflected from the low-conductivity surface of the planet. When magnetospheric convection is very slow, the incident and reflected Alfven waves propagate along approximately the same path. In this case, the net field-aligned currents will be small. However, as the convection speed increases, the reflected wave is displaced relatively to the incident wave so that the incident and reflected waves no longer compensate each other. In this case, the net field-aligned current may be large despite the lack of significant ionospheric and surface conductivity. Our estimate shows that for typical solar wind conditions at Mercury, the magnitude of Region 1-type FACs in Mercury’s magnetosphere may reach hundreds of kilo-Amperes. This AWR model of field-aligned currents may provide a solution to the long-standing problem of the closure of FACs in the Mercury’s magnetosphere.     

Global MHD modeling of Mercury's magnetosphere with applications to the MESSENGER mission and dynamo theory

We use a global magnetohydrodynamic (MHD) model to simulate Mercury's space environment for several solar wind and interplanetary magnetic field (IMF) conditions in anticipation of the magnetic field measurements by the MESSENGER spacecraft. The main goal of our study is to assess what characteristics of the internally generated field of Mercury can be inferred from the MESSENGER observations, and to what extent they will be able to constrain various models of Mercury's magnetic field generation. Based on the results of our simulations, we argue that it should be possible to infer not only the dipole component, but also the quadrupole and possibly even higher harmonics of the Mercury's planetary magnetic field. We furthermore expect that some of the crucial measurements for specifying the Hermean internal field will be acquired during the initial fly-bys of the planet, before MESSENGER goes into orbit around Mercury.     

A hybrid simulation of Mercury’s magnetosphere for the MESSENGER encounters in year 2008

The latest measurements from the two encounters of the MESSENGER spacecraft in year 2008 have discovered several interesting features of the magnetosphere of Mercury. We have performed high-resolution 3D hybrid model calculations to simulate the solar wind interaction with the Hermean magnetosphere during the first two Mercury encounters of the MESSENGER spacecraft in 2008. It is found that the global structure of the Hermean magnetosphere is significantly controlled by the direction of the interplanetary magnetic field. The bow shock size and shape and the magnetotail configuration have very large differences in these two encounters with northward-pointing and southward-pointing interplanetary magnetic field, respectively. Comparisons are also given with the observed magnetic field profiles and the computational results. In general, good agreement can be found including the interesting feature of the relatively thick magnetopause current layer at outbound measurements. Our work shows that 3D hybrid simulation is a promising method to study in detail the Hermean magnetosphere in parallel with the post-MOI observations of the MESSENGER spacecraft and the Bepi-Colombo mission in future.     

The space environment of Mercury at the times of the second and third MESSENGER flybys

The second and third flybys of Mercury by the MESSENGER spacecraft occurred, respectively, on 6 October 2008 and on 29 September 2009. In order to provide contextual information about the solar wind properties and the interplanetary magnetic field (IMF) near the planet at those times, we have used an empirical modeling technique combined with a numerical physics-based solar wind model. The Wang–Sheeley–Arge (WSA) method uses solar photospheric magnetic field observations (from Earth-based instruments) in order to estimate the inner heliospheric radial flow speed and radial magnetic field out to 21.5 solar radii from the Sun. This information is then used as input to the global numerical magnetohydrodynamic model, ENLIL, which calculates solar wind velocity, density, temperature, and magnetic field strength and polarity throughout the inner heliosphere. WSA-ENLIL calculations are presented for the several-week period encompassing the second and third flybys. This information, in conjunction with available MESSENGER data, aid in understanding the Mercury flyby observations and provide a basis for global magnetospheric modeling. We find that during both flybys, the solar wind conditions were very quiescent and would have provided only modest dynamic driving forces for Mercury's magnetospheric system.     

Monte Carlo modeling of sodium in Mercury’s exosphere during the first two MESSENGER flybys

We present a Monte Carlo model of the distribution of neutral sodium in Mercury’s exosphere and tail using data from the Mercury Atmospheric and Surface Composition Spectrometer (MASCS) on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft during the first two flybys of the planet in January and September 2008. We show that the dominant source mechanism for ejecting sodium from the surface is photon-stimulated desorption (PSD) and that the desorption rate is limited by the diffusion rate of sodium from the interior of grains in the regolith to the topmost few monolayers where PSD is effective. In the absence of ion precipitation, we find that the sodium source rate is limited to ∼10⁶-10⁷ cm⁻² s⁻¹, depending on the sticking efficiency of exospheric sodium that returns to the surface. The diffusion rate must be at least a factor of 5 higher in regions of ion precipitation to explain the MASCS observations during the second MESSENGER flyby. We estimate that impact vaporization of micrometeoroids may provide up to 15% of the total sodium source rate in the regions observed. Although sputtering by precipitating ions was found not to be a significant source of sodium during the MESSENGER flybys, ion precipitation is responsible for increasing the source rate at high latitudes through ion-enhanced diffusion.     

Behavior of planetary dynamos under the influence of external magnetic fields: Application to Mercury and Ganymede

For planets with strong intrinsic magnetic fields such as Earth and Jupiter, an external magnetic field is unlikely to affect the internal dynamo, but for bodies with weak intrinsic fields in appropriate environments, such as Mercury and Ganymede, the interaction with nearby field sources may determine the internal dynamics and overall behavior of their liquid iron cores. On the basis of simulations of such interactions using numerical models for fluid flow and dynamo generation, the parameter regimes for stable dipolar and multipolar reversing dynamo magnetic fields established for isolated systems can be substantially changed by the action of external sources. Relatively weak external background fields (as low as 2% of the averaged undisturbed field at the core-mantle boundary) may change the energy balance and alter the regime over which natural isolated dynamos operate.     

Mercury's spectrophotometric properties: Update from the Mercury Dual Imaging System observations during the third MESSENGER flyby

Presented here are analyses of the photometric measurements acquired by the imaging system on the MESSENGER spacecraft during its three flybys of Mercury, in particular the dedicated sequence of photometric measurements obtained during the third flyby. A concise, analytical approach is adopted for characterizing the effects of scattered light on the images. This approach works well for wavelengths shorter than 700 nm but breaks down at the longer wavelengths where the scattering behavior of the imaging system is more complex. Broadband spectral properties are commensurate with ground-based observations for spectra acquired at phase angles less than 110°; photometric corrections to a common illumination and viewing geometry provide consistent results for those phase angles. No phase reddening is apparent in the image-derived spectra. A bolometric albedo of 0.081 is derived over the wavelength range of the imaging system.     

Limits to Mercury's magnesium exosphere from MESSENGER second flyby observations

The discovery measurements of Mercury's exospheric magnesium, obtained by the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) probe during its second Mercury flyby, are modeled to constrain the source and loss processes for this neutral species. Fits to a Chamberlain exosphere reveal that at least two source temperatures are required to reconcile the distribution of magnesium measured far from and near the planet: a hot ejection process at the equivalent temperature of several tens of thousands of degrees K, and a competing, cooler source at temperatures as low as 400 K. For the energetic component, our models indicate that the column abundance that can be attributed to sputtering under constant southward interplanetary magnetic field conditions is at least a factor of five less than the rate dictated by the measurements. Although highly uncertain, this result suggests that another energetic process, such as the rapid dissociation of exospheric MgO, may be the main source of the distant neutral component. If meteoroid and micrometeoroid impacts eject mainly molecules, the total amount of magnesium at altitudes exceeding ∼100 km is found to be consistent with predictions by impact vaporization models for molecule lifetimes of no more than two minutes. Though a sharp increase in emission observed near the dawn terminator region can be reproduced if a single meteoroid enhanced the impact vapor at equatorial dawn, it is much more likely that observations in this region, which probe heights increasingly near the surface, indicate a reservoir of volatile Mg being acted upon by lower-energy source processes.     

Electric fields within the martian magnetosphere and ion extraction: ASPERA-3 observations

Observations made by the ASPERA-3 experiment onboard the Mars Express spacecraft found within the martian magnetosphere beams of planetary ions. In the energy (E/q)-time spectrograms these beams are often displayed as dispersive-like, ascending or descending (whether the spacecraft moves away or approach the planet) structures. A linear dependence between energy gained by the beam ions and the altitude from the planet suggests their acceleration in the electric field. The values of the electric field evaluated from ion energization occur close to the typical values of the interplanetary motional electric field. This suggests an effective penetration of the solar wind electric field deep into the martian magnetosphere or generation of large fields within the magnetosphere. Two different classes of events are found. At the nominal solar wind conditions, a ‘penetration’ occurs near the terminator. At the extreme solar wind conditions, the boundary of the induced magnetosphere moves to a more dense upper atmosphere that leads to a strong scavenging of planetary ions from the dayside regions.     

MESSENGER observations of the plasma environment near Mercury

The MESSENGER Fast Imaging Plasma Spectrometer (FIPS) measured the bulk plasma characteristics of Mercury's magnetosphere and solar wind environment during the spacecraft's first two flybys of the planet on 14 January 2008 (M1) and 6 October 2008 (M2), producing the first measurements of thermal ions in Mercury's magnetosphere. In this work, we identify major features of the Mercury magnetosphere in the FIPS proton data and describe the data analysis process used for recovery of proton density (n_p) and temperature (T_p) with a forward modeling technique, required because of limitations in measurement geometry. We focus on three regions where the magnetospheric flow speed is likely to be low and meets our criteria for the recovery process: the M1 plasma sheet and the M1 and M2 dayside and nightside boundary-layer regions. Interplanetary magnetic field (IMF) conditions were substantially different between the two flybys, with intense reconnection signatures observed by the Magnetometer during M2 versus a relatively quiet magnetosphere during M1. The recovered ion density and temperature values for the M1 quiet-time plasma sheet yielded n_p∼1–10 cm⁻³, T_p∼2×10⁶ K, and plasma β∼2. The nightside boundary-layer proton densities during M1 and M2 were similar, at n_p∼4–5 cm⁻³, but the temperature during M1 (T_p∼4–8×10⁶ K) was 50% less than during M2 (T_p∼8×10⁶ K), presumably due to reconnection in the tail. The dayside boundary layer observed during M1 had a density of ∼16 cm⁻³ and temperature of 2×10⁶ K, whereas during M2 this region was less dense and hotter (n_p∼8 cm⁻³ and T_p∼10×10⁶ K), again, most likely due to magnetopause reconnection. Overall, the southward interplanetary magnetic field during M2 clearly produced higher T_p in the dayside and nightside magnetosphere, as well as higher plasma β in the nightside boundary, ∼20 during M2 compared with ∼2 during M1. The proton plasma pressure accounts for only a fraction (24% for M1 and 64% for M2) of the drop in magnetic pressure upon entry into the dayside boundary layer. This result suggests that heavy ions of planetary origin, not considered in this analysis, may provide the “missing” pressure. If these planetary ions were hot due to “pickup” in the magnetosheath, the required density for pressure balance would be an ion density of ∼1 cm⁻³ for an ion temperature of ∼10⁸ K.     

Models of magnetic field generation in partly stable planetary cores: Applications to Mercury and Saturn

A substantial part of Mercury's iron core may be stably stratified because the temperature gradient is subadiabatic. A dynamo would operate only in a deep sublayer. We show that such a situation arises for a wide range of values for the heat flow and the sulfur content in the core. In Saturn the upper part of the metallic hydrogen core could be stably stratified because of helium depletion. The magnetic field is unusually weak in the case of Mercury and unusually axisymmetric at Saturn. We study numerical dynamo models in rotating spherical shells with a stable outer region. The control parameters are chosen such that the magnetic Reynolds number is in the range of expected Mercury values. Because of its slow rotation, Mercury may be in a regime where the dipole contribution to the internal magnetic field is weak. Most of our models are in this regime, where the dynamo field consists mainly of rapidly varying higher multipole components. They can hardly pass the stable conducting layer because of the skin effect. The weak low-degree components vary more slowly and control the structure of the field outside the core, whose strength matches the observed field strength at Mercury. In some models the axial dipole dominates at the planet's surface and in others the axial quadrupole is dominant. Differential rotation in the stable layer, representing a thermal wind, is important for attenuating non-axisymmetric components in the exterior field. In some models that we relate to Saturn the axial dipole is intrinsically strong inside the dynamo. The surface field strength is much larger than in the other cases, but the stable layer eliminates non-axisymmetric modes. The Messenger and Bepi Colombo space missions can test our predictions that Mercury's field is large-scaled, fairly axisymmetric, and shows no secular variations on the decadal time scale.     

Observations of suprathermal electrons in Mercury's magnetosphere during the three MESSENGER flybys

In 2008 the MESSENGER spacecraft made the first direct observation of Mercury's magnetosphere in the more than 30 years since the Mariner 10 encounters. During MESSENGER's first flyby on 14 January 2008, the interplanetary magnetic field (IMF) was northward immediately prior to and following MESSENGER's equatorial passage through this small magnetosphere. The Energetic Particle Spectrometer (EPS), one of two sensors on the Energetic Particle and Plasma Spectrometer instrument that responds to electrons from ∼35 keV to 1 MeV and ions from ∼35 keV to 2.75 MeV, saw no increases in particle intensity above instrumental background (∼5 particles/cm²/sr/s/keV at 45 keV) at any time during the probe's magnetospheric passage. During MESSENGER's second flyby on 6 October 2008, there was a steady southward IMF, and intense reconnection was observed between the planet's magnetic field and the IMF. However, once again EPS did not observe bursts of energetic particles similar to those reported by Mariner 10 from its March 1974 encounter. On 29 September 2009, MESSENGER flew by Mercury for the third and final time before orbit insertion in March 2011. Although a spacecraft safe-hold event stopped science measurements prior to the outbound portion of the flyby, all instruments recorded full observations until a few minutes before the closest approach. In particular, the MESSENGER Magnetometer documented several substorm-like signatures of extreme loading of Mercury's magnetotail, but again EPS measured no energetic ions or electrons above instrument background during the inbound portion of the flyby. MESSENGER's X-Ray Spectrometer (XRS) nonetheless observed photons resulting from low-energy (∼10 keV) electrons impinging on its detectors during each of the three flybys. We infer that suprathermal plasma electrons below the EPS energy threshold caused the bremsstrahlung seen by XRS. In this paper, we summarize the energetic particle observations made by EPS and XRS during MESSENGER's three Mercury flybys, and we revisit the observations reported by Mariner 10 in the context of these new results.     

Analysis of MESSENGER Gamma-Ray Spectrometer data from the Mercury flybys

During its three flybys of Mercury, the MESSENGER spacecraft made the first detection of gamma-ray emission from the planet's surface. With a closest approach distance of ∼200 km, the flybys provided an opportunity to measure elemental abundances of Mercury's near-equatorial regions, which will not be visited at low altitude during MESSENGER's orbital mission phase. Despite being limited by low planetary photon flux, sufficient counts were accumulated during the first two flybys to estimate bounds on abundances for some elements having relatively strong gamma-ray spectral peaks, including Si, Fe, Ti, K, and Th. Only for Si is the standard deviation σ sufficiently small to conclude that this element was detected with 99% confidence. Iron and potassium are detected at the 2−σ (95% confidence) level, whereas only upper bounds on Ti and Th can be determined. Relative to a Si abundance assumed to be 18 weight percent (wt%), 2−σ upper bounds have been estimated as 9.7 wt% for Fe, 7.0 wt% for Ti, 0.087 wt% for K, and 2.2 ppm for Th. The relatively low upper bound on K rules out some previously suggested models for surface composition for the regions sampled. Upper bounds on Fe/Si and Ti/Si ratios are generally consistent with Ti and Fe abundances estimated from the analysis of measurements by the MESSENGER Neutron Spectrometer during the flybys but are also permissive of much lower concentrations.     

Stereo topographic models of Mercury after three MESSENGER flybys

From photogrammetric analysis of stereo images of Mercury obtained during three MESSENGER flybys, we have produced three digital terrain models (DTMs) that have a grid spacing of 1 km and together cover 30% of the planet's surface. The terrain models provide a rich source of information on the morphology of Mercury's surface, including details of tectonic scarp systems as well as impact craters and basins. More than 400 craters larger than 15 km in diameter are included in the models. Additionally, the models provide important test cases for the analysis of stereo image data to be collected during MESSENGER's orbital mission phase. Small lateral offsets and differences in trends between stereo DTMs and laser altimeter profiles may be due to remaining errors in spacecraft position, instrument pointing, or Mercury coordinate knowledge. Such errors should be resolved during the orbital mission phase, when more joint analyses of data and detailed orbit modeling will be possible.     

The equatorial shape and gravity field of Mercury from MESSENGER flybys 1 and 2

On 14 January and 6 October 2008 the MESSENGER spacecraft passed within 200 km of the surface of Mercury. These flybys by MESSENGER provided the first observations of Mercury from a spacecraft since the Mariner 10 flybys in 1974 and 1975. Data from the Mercury Laser Altimeter (MLA) provided new information on the equatorial shape of Mercury, and Doppler tracking of the spacecraft through the flybys provided new data on the planet’s gravity field. The MLA passes were on opposite hemispheres of the planet and span collectively ∼40% of the equatorial circumference. The mean elevation of topography observed during flyby 1, in the longitude range 0-90°E, is greater than that seen during flyby 2 in the longitude range 180-270°E, indicating an offset between centers of mass and figure having a magnitude and phase in general agreement with topography determined by Earth-based radar. Both MLA profiles are characterized by slopes of ∼0.015° downward to the east, which is consistent with a long-wavelength equatorial shape defined by a best-fitting ellipse. The Doppler tracking data show sensitivity to the gravitational structure of Mercury. The equatorial ellipticity of the gravitational field, C_2,2, is well determined and correlates with the equatorial shape. The S_2,2 coefficient is ∼0, as would be expected if Mercury’s coordinate system, defined by its rotational state, is aligned along its principal axes of inertia. The recovered value of the polar flattening of the gravitational potential, J₂, is considerably lower in magnitude than the value obtained from Mariner 10 tracking, a result that is problematic for internal structure models. This parameter is not as well constrained as the equatorial ellipticity because the flyby trajectories were nearly in the planet’s equatorial plane. The residuals from the Doppler tracking data suggest the possibility of mascons on Mercury, but flyby observations are of insufficient resolution for confident recovery. For a range of assumptions on degree of compensation and crustal and mantle densities, the allowable crustal thickness is consistent with the upper limit of about 100 km estimated from the inferred depth of faulting beneath a prominent lobate scarp, an assumed ductile flow law for crustal material, and the condition that temperature at the base of the crust does not exceed the solidus temperature. The MESSENGER value of C_2,2 has allowed an improved estimate of the ratio of the polar moment of inertia of the mantle and crust to the full polar moment (C_m/C), a refinement that strengthens the conclusion that Mercury has at present a fluid outer core.     

The transition from complex crater to peak-ring basin on Mercury: New observations from MESSENGER flyby data and constraints on basin formation models

The study of peak-ring basins and other impact crater morphologies transitional between complex craters and multi-ring basins is important to our understanding of the mechanisms for basin formation on the terrestrial planets. Mercury has the largest population, and the largest population per area, of peak-ring basins and protobasins in the inner solar system and thus provides important data for examining questions surrounding peak-ring basin formation. New flyby images from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft have more than doubled the area of Mercury viewed at close range, providing nearly complete global coverage of the planet's surface when combined with flyby data from Mariner 10. We use this new near-global dataset to compile a catalog of peak-ring basins and protobasins on Mercury, including measurements of the diameters of the basin rim crest, interior ring, and central peak (if present). Our catalog increases the population of peak-ring basins by ∼150% and protobasins by ∼100% over previous catalogs, including 44 newly identified peak-ring basins (total=74) and 17 newly identified protobasins (total=32). A newly defined transitional basin type, the ringed peak-cluster basin (total=9), is also described. The new basin catalog confirms that Mercury has the largest population of peak-ring basins of the terrestrial planets and also places the onset rim-crest diameter for peak-ring basins at , which is intermediate between the onset diameter for peak-ring basins on the Moon and those for the other terrestrial planets. The ratios of ring diameter to rim-crest diameter further emphasize that protobasins and peak-ring basins are parts of a continuum of basin morphologies relating to their processes of formation, in contrast to previous views that these forms are distinct. Comparisons of the predictions of peak-ring basin-formation models with the characteristics of the basin catalog for Mercury suggest that formation and modification of an interior melt cavity and nonlinear scaling of impact melt volume with crater diameter provide important controls on the development of peak rings. The relationship between impact-melt production and peak-ring formation is strengthened further by agreement between power laws fit to ratios of ring diameter to rim-crest diameter for peak-ring basins and protobasins and the power-law relation between the dimension of a melt cavity and the crater diameter. More detailed examination of Mercury's peak-ring basins awaits the planned insertion of the MESSENGER spacecraft into orbit about Mercury in 2011.     

Highly reducing conditions during core formation on Mercury: Implications for internal structure and the origin of a magnetic field

The high average density and low surface FeO content of the planet Mercury are shown to be consistent with very low oxygen fugacity during core segregation, in the range 3-6 log units below the iron-wüstite buffer. These low oxygen fugacities, and associated high metal content, are characteristic of high-iron enstatite (EH) and Bencubbinite (CB) chondrites, raising the possibility that such materials may have been important building blocks for this planet. With this idea in mind we have explored the internal structure of a Mercury sized planet of EH or CB bulk composition. Phase equilibria in the silicate mantle have been modeled using the thermodynamic calculator p-MELTS, and these simulations suggest that orthopyroxene will be the dominant mantle phase for both EH and CB compositions, with crystalline SiO₂ being an important minor phase at all pressures. Simulations for both compositions predict a plagioclase-bearing “crust” at low pressure, significant clinopyroxene also being calculated for the CB bulk composition. Concerning the core, comparison with recent high pressure and high temperature experiments relevant to the formation of enstatite meteorites, suggest that the core of Mercury may contain several wt.% silicon, in addition to sulfur. In light of the pressure of the core-mantle boundary on Mercury (∼7 GPa) and the pressure at which the immiscibility gap in the system Fe-S-Si closes (∼15 GPa) we suggest that Mercury’s core may have a complex shell structure comprising: (i) an outer layer of Fe-S liquid, poor in Si; (ii) a middle layer of Fe-Si liquid, poor in S; and (iii) an inner core of solid metal. The distribution of heat-producing elements between mantle and core, and within a layered core have been quantified. Available data for Th and K suggest that these elements will not enter the core in significant amounts. On the other hand, for the case of U both recently published metal/silicate partitioning data, as well as observations of U distribution in enstatite chondrites, suggest that this element behaves as a chalcophile element at low oxygen fugacity. Using these new data we predict that U will be concentrated in the outer layer of the mercurian core. Heat from the decay of U could thus act to maintain this part of Mercury’s core molten, potentially contributing to the origin of Mercury’s magnetic field. This result contrasts with the Earth where the radioactive decay of U represents a negligible contribution to core heating.     

Whole-disk spectrophotometric properties of Mercury: Synthesis of MESSENGER and ground-based observations

Disk-integrated and disk-resolved measurements of Mercury’s surface obtained by both the Mercury Dual Imaging System (MDIS) and the Mercury Atmospheric and Surface Composition Spectrometer (MASCS) onboard the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft were analyzed and compared with previous ground-based observations of Mercury at 11 wavelengths. The spectra show no definitive absorption features and display a red spectral slope (increasing reflectance with increasing wavelength) typical of space-weathered rocky surfaces. The MDIS spectra show evidence of phase reddening, which is not observed in the MASCS spectra. The MDIS spectra are commensurate with ground-based observations to within 10%, whereas the MASCS spectra display greater discrepancies with ground-based observations at near-infrared wavelengths. The derived photometric calibrations provide corrections within 10% for observations taken at phase angles less than ∼100°. The derived photometric properties are indicative of a more compact regolith than that of the lunar surface or of average S-type asteroids. The photometric roughness of the surface is also much smoother than the Moon’s. The calculated geometric albedo (reflectance at zero phase) is higher than lunar values. The lower reflectance of immature units on Mercury compared with immature units on the Moon, in conjunction with the higher geometric albedo, is indicative of more complicated grain structures within Mercury’s regolith.     

Electron transport and precipitation at Mercury during the MESSENGER flybys: Implications for electron-stimulated desorption

To examine electron transport, energization, and precipitation in Mercury's magnetosphere, a hybrid simulation study has been carried out that follows electron trajectories within the global magnetospheric electric and magnetic field configuration of Mercury. We report analysis for two solar-wind parameter conditions corresponding to the first two MESSENGER Mercury flybys on January 14, 2008, and October 6, 2008, which occurred for similar solar wind speed and density but contrasting interplanetary magnetic field (IMF) directions. During the first flyby the IMF had a northward component, while during the second flyby the IMF was southward. Electron trajectories are traced in the fields of global hybrid simulations for the two flybys. Some solar wind electrons follow complex trajectories at or near where dayside reconnection occurs and enter the magnetosphere at these locations. The entry locations depend on the IMF orientation (north or south). As the electrons move through the entry regions they can be energized as they execute non-adiabatic (demagnetized) motion. Some electrons become magnetically trapped and drift around the planet with energies on the order of 1–10 keV. The highest energy of electrons anywhere in the magnetosphere is about 25 keV, consistent with the absence of high-energy (>35 keV) electrons observed during either MESSENGER flyby. Once within the magnetosphere, a fraction of the electrons precipitates at the planetary surface with fluxes on the order of 10⁹ cm⁻² s⁻¹ and with energies of hundreds of eV. This finding has important implications for the viability of electron-stimulated desorption (ESD) as a mechanism for contributing to the formation of the exosphere and heavy ion cloud around Mercury. From laboratory estimates of ESD ion yields, a calculated ion production rate due to ESD at Mercury is found to be on par with ion sputtering yields.