On the population, physical decay and orbital distribution of Jupiter family comets: Numerical simulations

We study the Jupiter family comet (JFC) population assumed to come from the Scattered Disk and transferred to the Jupiter’s zone through gravitational interactions with the Jovian planets. We shall define as JFCs those with orbital periods and Tisserand parameters in the range 2<T?3.1, while those comets coming from the same source, but that do not fulfill the previous criteria (mainly because they have periods ) will be called ‘non-JFCs’. We performed a series of numerical simulations of fictitious comets with a purely dynamical model and also with a more complete dynamical-physical model that includes besides nongravitational forces, sublimation and splitting mechanisms. With the dynamical model, we obtain a poor match between the computed distributions of orbital elements and the observed ones. However with the inclusion of physical effects in the complete model we are able to obtain good fits to observations. The best fits are attained with four splitting models with a relative weak dependence on q, and a mass loss in every splitting event that is less when the frequency is high and vice versa. The mean lifetime of JFCs with radii and is found to be of about 150-200 revolutions (∼. The total population of JFCs with radii within Jupiter’s zone is found to be of 450±50. Yet, the population of non-JFCs with radii in Jupiter-crossing orbits may be ∼4 times greater, thus leading to a whole population of JFCs + non-JFCs of ∼2250±250. Most of these comets have perihelia close to Jupiter’s orbit. On the other hand, very few non-JFCs reach the Earth’s vicinity (perihelion distances ) which gives additional support to the idea that JFCs and Halley-type comets have different dynamical origins. Our model allows us to define the zones of the orbital element space in which we would expect to find a large number of JFCs. This is the first time, to our knowledge, that a physico-dynamical model is presented that includes sublimation and different splitting laws. Our work helps to understand the role played by these erosion effects in the distribution of the orbital elements and lifetimes of JFCs.     

Low-speed impacts between rubble piles modeled as collections of polyhedra, 2

We present the results of additional calculations involving the collisions of km-scale rubble piles. In new work, we used the Open Dynamics Engine (ODE), an open-source library for the simulation of rigid-body dynamics that incorporates a sophisticated collision-detection and resolution routine. We found that using ODE resulted in a speed-up of approximately a factor of 30 compared with previous code. In this paper we report on the results of almost 1200 separate runs, the bulk of which were carried out with 1000-2000 elements. We carried out calculations with three different combinations of the coefficients of friction η and (normal) restitution ?: low (η=0,?=0.8), medium (η=0,?=0.5), and high (η=0.5,?=0.5) dissipation.For target objects of ∼1 km in radius, we found reduced critical disruption energy values in head-on collisions from 2 to 100 J kg⁻¹ depending on dissipation and impactor/target mass ratio. Monodisperse objects disrupted somewhat more easily than power-law objects in general. For oblique collisions of equal-mass objects, mildly off-center collisions (b/b₀=0.5) seemed to be as efficient or possibly more efficient at collisional disruption as head-on collisions. More oblique collisions were less efficient and the most oblique collisions we tried (b/b₀=0.866) required up to ∼200 J kg⁻¹ for high-dissipation power-law objects. For calculations with smaller numbers of elements (total impactor or 200 elements) we found that collisions were more efficient for smaller numbers of more massive elements, with values as low as for low-dissipation cases. We also analyzed our results in terms of the relations proposed by Stewart and Leinhardt [Stewart, S.T., Leinhardt, Z.M., 2009. Astrophys. J. 691, L133-L137] where where Q_R is the impact kinetic energy per unit total mass m_i+m_T. Although there is a significant amount of scatter, our results generally bear out the suggested relation.     

Calculation of the enrichment of the giant planet envelopes during the “late heavy bombardment”

The giant planets of our solar system possess envelopes consisting mainly of hydrogen and helium but are also significantly enriched in heavier elements relatively to our Sun. In order to better constrain how these heavy elements have been delivered, we quantify the amount accreted during the so-called “late heavy bombardment”, at a time when planets were fully formed and planetesimals could not sink deep into the planets. On the basis of the “Nice model”, we obtain accreted masses (in terrestrial units) equal to for Jupiter, and for Saturn. For the two other giant planets, the results are found to depend mostly on whether they switched position during the instability phase. For Uranus, the accreted mass is with an inversion and without an inversion. Neptune accretes in models in which it is initially closer to the Sun than Uranus, and otherwise. With well-mixed envelopes, this corresponds to an increase in the enrichment over the solar value of 0.033±0.001 and 0.074±0.007 for Jupiter and Saturn, respectively. For the two other planets, we find the enrichments to be 2.1±1.4 (w/ inversion) or 1.2±0.7 (w/o inversion) for Uranus, and 2.0±1.2 (w/ inversion) or 2.7±1.6 (w/o inversion) for Neptune. This is clearly insufficient to explain the inferred enrichments of ∼4 for Jupiter, ∼7 for Saturn and ∼45 for Uranus and Neptune.     

New Horizons Alice ultraviolet observations of a stellar occultation by Jupiter’s atmosphere

The Alice ultraviolet spectrograph onboard the New Horizons spacecraft observed two occultations of the bright star χ Ophiucus by Jupiter’s atmosphere on February 22 and 23, 2007 during the approach phase of the Jupiter flyby. The ingress occultation probed the atmosphere at 32°N latitude near the dawn terminator, while egress probed 18°N latitude near the dusk terminator. A detailed analysis of both the ingress and egress occultations, including the effects of molecular hydrogen, methane, acetylene, ethylene, and ethane absorptions in the far ultraviolet (FUV), constrains the eddy diffusion coefficient at the homopause level to be  cm² s⁻¹, consistent with Voyager measurements and other analyses (Festou, M.C., Atreya, S.K., Donahue, T.M., Sandel, B.R., Shemansky, D.E., Broadfoot, A.L. [1981]. J. Geophys. Res. 86, 5717-5725; Vervack Jr., R.J., Sandel, B.R., Gladstone, G.R., McConnell, J.C., Parkinson, C.D. [1995]. Icarus 114, 163-173; Yelle, R.V., Young, L.A., Vervack Jr., R.J., Young, R., Pfister, L., Sandel, B.R. [1996]. J. Geophys. Res. 101 (E1), 2149-2162). However, the actual derived pressure level of the methane homopause for both occultations differs from that derived by [Festou et al., 1981] and [Yelle et al., 1996] from the Voyager ultraviolet occultations, suggesting possible changes in the strength of atmospheric mixing with time. We find that at 32°N latitude, the methane concentration is  cm⁻³ at 70,397 km, the methane concentration is  cm⁻³ at 70,383 km, the acetylene concentration is  cm⁻³ at 70,364 km, and the ethane concentration is  cm⁻³ at 70,360 km. At 18°N latitude, the methane concentration is  cm⁻³ at 71,345 km, the methane concentration is  cm⁻³ at 71,332 km, the acetylene concentration is cm⁻³ at 71,318 km, and the ethane concentration is  cm⁻³ at 71,315 km. We also find that the H₂ occultation light curve is best reproduced if the atmosphere remains cold in the microbar region such that the base of the thermosphere is located at a lower pressure level than that determined by in situ instruments aboard the Galileo probe (Seiff, A., Kirk, D.B., Knight, T.C.D., Young, R.E., Mihalov, J.D., Young, L.A., Milos, F.S., Schubert, G., Blanchard, R.C., Atkinson, D. [1998]. J. Geophys. Res. 103 (E10), 22857-22889) - the Sieff et al. temperature profile leads to too much absorption from H₂ at high altitudes. However, this result is highly model dependent and non-unique. The observations and analysis help constrain photochemical models of Jupiter’s atmosphere.     

Photochemical escape of oxygen from Mars: A comparison of the exobase approximation to a Monte Carlo method

The non-thermal escape of neutral O atoms from Mars at the current epoch is largely due to dissociative recombination of :

     

Isotope fractionation in the photochemical escape of O from Mars

The production of energetic and escaping neutral O atoms at the current epoch in the martian thermosphere is thought to be dominated by the dissociative recombination process:

     

Titan haze distribution and optical properties retrieved from recent observations

The VIMS instrument onboard Cassini observed the north polar region of Titan at 113° phase angle, 28 December 2006. On this spectral image, a vast polar cloud can be seen northward to 62°N, and elsewhere, the haze appears as the dominant source of scattering. Because the surface does not appear in the wavelength range between 0.3 and , this spectro-image is ideal to study airborn scatterers both in methane bands and windows. In this work, we study this image, along with another image taken at 13° phase angle. This image probe both the atmosphere and the surface from pole to pole. First, we characterise the spatial distribution of the haze layer above 100 km between 80°S and 70°N. We find a north south asymmetry with a haze opacity increasing by a factor 3 from the south pole to the equator, then a constant value up to about 30°N and a decrease of a factor 2 between 30°N and about 60°N. Beyond 60°N, we can see the influence of the north polar cloud, even in the band, but no polar haze accumulation. The fact that the north polar region is still in the polar night is a possible explanation. No haze accumulation is observed in the southern polar region. Secondly, we partly identify the origin of spectral features in the 2.8-μm methane window, which are found to be due to deuterated methane (CH₃D). This allows the analyse of this window and to retrieve the opacity of scatterers layer below 80 km (presumably made of aerosols and condensate droplets) between 35°N and 60°N. Finally, we constrained the values and the spectral behaviour of the imaginary part of the aerosol refractive index in the range between 0.3 and . To do so, we studied the 2.8-μm window with the image taken at 113° phase angle. To complete the analysis, we studied the transmission through the haze layer in the 3.4-μm band observed in solar occultation mode with VIMS, and we analysed the single scattering albedo retrieved with DISR instrument between 0.4 and . The imaginary part of the refractive index that we find for Titan aerosols follows Khare et al. (Khare, B.N. et al. [1984]. Icarus 60, 127-137) optical constant up to and becomes constant beyond this wavelength at least up to . It also has a prominent peak at and a secondary peak at , which indicates material rich in C-H bonds, with much less N-H bonds than in Khare et al. (1984) tholins.     

Eclipsing binary Trojan asteroid Patroclus: Thermal inertia from Spitzer observations

We present mid-infrared observations of the binary L5-Trojan system (617) Patroclus-Menoetius before, during, and after two shadowing events, using the Infrared Spectrograph (IRS) on board the Spitzer Space Telescope. For the first time, we effectively observe changes in asteroid surface temperature in real time, allowing the thermal inertia to be determined very directly. A new detailed binary thermophysical model is presented which accounts for the system’s known mutual orbit, arbitrary component shapes, and thermal conduction in the presence of eclipses.We obtain two local thermal-inertia values, representative of the respective shadowed areas: and . The average thermal inertia is estimated to be , potentially with significant surface heterogeneity. This first thermal-inertia measurement for a Trojan asteroid indicates a surface covered in fine regolith. Independently, we establish the presence of fine-grained (<a few μm) silicates on the surface, based on emissivity features near 10 and similar to those previously found on other Trojans.We also report V-band observations and report a lightcurve with complete rotational coverage. The lightcurve has a low amplitude of peak-to-peak, implying a roughly spherical shape for both components, and is single-periodic with a period equal to the period of the mutual orbit, indicating that the system is fully synchronized.The diameters of Patroclus and Menoetius are 106±11 and , respectively, in agreement with previous findings. Taken together with the system’s known total mass, this implies a bulk mass density of , significantly below the mass density of L4-Trojan asteroid (624) Hektor and suggesting a bulk composition dominated by water ice.All known physical properties of Patroclus, arguably the best studied Trojan asteroid, are consistent with those expected in icy objects with devolatilized surface (extinct comets), consistent with what might be implied by recent dynamical modeling in the framework of the Nice Model.     

Titania's radius and an upper limit on its atmosphere from the September 8, 2001 stellar occultation

On September 8, 2001 around 2 h UT, the largest uranian moon, Titania, occulted Hipparcos star 106829 (alias SAO 164538, a V=7.2, K0 III star). This was the first-ever observed occultation by this satellite, a rare event as Titania subtends only 0.11 arcsec on the sky. The star's unusual brightness allowed many observers, both amateurs or professionals, to monitor this unique event, providing fifty-seven occultations chords over three continents, all reported here. Selecting the best 27 occultation chords, and assuming a circular limb, we derive Titania's radius: (1-σ error bar). This implies a density of using the value derived by Taylor [Taylor, D.B., 1998. Astron. Astrophys. 330, 362-374]. We do not detect any significant difference between equatorial and polar radii, in the limit , in agreement with Voyager limb image retrieval during the 1986 flyby. Titania's offset with respect to the DE405 + URA027 (based on GUST86 theory) ephemeris is derived: ΔαTcos(δT)=−108±13 mas and ΔδT=−62±7 mas (ICRF J2000.0 system). Most of this offset is attributable to a Uranus' barycentric offset with respect to DE405, that we estimate to be: and ΔδU=−85±25 mas at the moment of occultation. This offset is confirmed by another Titania stellar occultation observed on August 1st, 2003, which provides an offset of ΔαTcos(δT)=−127±20 mas and ΔδT=−97±13 mas for the satellite. The combined ingress and egress data do not show any significant hint for atmospheric refraction, allowing us to set surface pressure limits at the level of 10-20 nbar. More specifically, we find an upper limit of 13 nbar (1-σ level) at 70 K and 17 nbar at 80 K, for a putative isothermal CO₂ atmosphere. We also provide an upper limit of 8 nbar for a possible CH₄ atmosphere, and 22 nbar for pure N₂, again at the 1-σ level. We finally constrain the stellar size using the time-resolved star disappearance and reappearance at ingress and egress. We find an angular diameter of 0.54±0.03 mas (corresponding to projected at Titania). With a distance of 170±25 parsecs, this corresponds to a radius of 9.8±0.2 solar radii for HIP 106829, typical of a K0 III giant.     

Fragment-collision model for compound chondrule formation: Estimation of collision probability

We propose a new scenario for compound chondrule formation named as “fragment-collision model,” in the framework of the shock-wave heating model. A molten cm-sized dust particle (parent) is disrupted in the high-velocity gas flow. The extracted fragments (ejectors) are scattered behind the parent and the mutual collisions between them will occur. We modeled the disruption event by analytic considerations in order to estimate the probability of the mutual collisions assuming that all ejectors have the same radius. In the typical case, the molten thin () layer of the parent surface will be stripped by the gas flow. The stripped layer is divided into about 200 molten ejectors (assuming that the radius of ejectors is 300 μm) and then they are blown away by the gas flow in a short period of time (). The stripped layer is leaving from the parent with the velocity of depending on the viscosity, and we assumed that the extracted ejectors have a random velocity Δv of the same order of magnitude. Using above values, we can estimate the number density of ejectors behind the parent as . These ejectors occupy ∼9% of the space behind the parent in volume. Considering that the collision rate (number of collisions per unit time experienced by an ejector) is given by Rcoll=σcollneΔv, where σcoll is the cross-section of collision [e.g., Gooding, J.K., Keil, K., 1981. Meteoritics 16, 17-43], we obtain by substituting above values. Since most collisions occur within the short duration () before the ejectors are blown away, we obtain the collision probability of Pcoll∼0.36, which is the probability of collisions experienced by an ejector in one disruption event. The estimated collision probability is about one order of magnitude larger than the observed fraction of compound chondrules. In addition, the model predictions are qualitatively consistent with other observational data (oxygen isotopic composition, textural types, and size ratios of constituents). Based on these results, we concluded that this new model can be one of the strongest candidates for the compound chondrule formation. It should be noted that all collisions do not necessarily lead to the compound chondrule formation. The formation efficiency and the future works which should be investigated in the forthcoming paper are also discussed.     

Thermal disturbances caused by lander shadowing and the measurability of the martian planetary heat flow

A measurement of the martian planetary heat flow requires the determination of the subsurface temperature gradient, which is affected by surface insolation. I investigate the propagation of thermal disturbances caused by lander shadowing and derive measurement requirements for in situ heat flow experiments. I find that for short term measurements spanning 180 sol, a measurement depth of at least 2 m is needed to guarantee a stable thermal environment directly underneath the lander for Moon-like thermal conductivities of . For extremely large conductivities of , this depth needs to be increased to 4 m, but if the probe can be deployed outside the lander structure, the respective depths can be decreased by 1 m. For long term measurements spanning at least a full martian year heat flow perturbations are smaller than 5% below a depth of 3 m directly underneath the lander. Outside the lander structure, essentially unperturbed measurements may be conducted at depths of 0.5 and 1.5 m for thermal conductivities of 0.02 and , respectively.     

Estimating the masses of Saturn’s A and B rings from high-optical depth N-body simulations and stellar occultations

We have completed a series of local N-body simulations of Saturn’s B and A rings in order to identify systematic differences in the degree of particle clumping into self-gravity wakes as a function of orbital distance from Saturn and dynamical optical depth (a function of surface density). These simulations revealed that the normal optical depth of the final configuration can be substantially lower than one would infer from a uniform distribution of particles. Adding more particles to the simulation simply piles more particles onto the self-gravity wakes while leaving relatively clear gaps between the wakes. Estimating the mass from the observed optical depth is therefore a non-linear problem. These simulations may explain why the Cassini UVIS instrument has detected starlight at low incidence angles through regions of the B ring that have average normal optical depths substantially greater than unity at some observation geometries [Colwell, J.E., Esposito, L.W., Srem?evi?, M., Stewart, G.R., McClintock, W.E., 2007. Icarus 190, 127-144]. We provide a plausible internal density of the particles in the A and B rings based upon fitting the results of our simulations with Cassini UVIS stellar occultation data. We simulated Cassini-like occultations through our simulation cells, calculated optical depths, and attempted to extrapolate to the values that Cassini observes. We needed to extrapolate because even initial optical depths of >4 (σ > 240 g cm⁻²) only yielded final optical depths no greater than 2.8, smaller than the largest measured B ring optical depths. This extrapolation introduces a significant amount of uncertainty, and we chose to be conservative in our overall mass estimates. From our simulations, we infer the surface density of the A ring to be , which corresponds to a mass of . We infer a minimum surface density of for Saturn’s B ring, which corresponds to a minimum mass estimate of . The A ring mass estimate agrees well with previous analyses, while the B ring is at least 40% larger. In sum, our lower limit estimate is that the total mass of Saturn’s ring system is 120-200% the mass of the moon Mimas, but significantly larger values would be plausible given the limitations of our simulations. A significantly larger mass for Saturn’s rings favors a primordial origin for the rings because the disruption of a former satellite of the required mass would be unlikely after the decay of the late heavy bombardment of planetary surfaces.     

Venus wind map at cloud top level with the MTR/THEMIS visible spectrometer, I: Instrumental performance and first results

Solar light gets scattered at cloud top level in Venus’ atmosphere, in the visible range, which corresponds to the altitude of 67 km. We present Doppler velocity measurements performed with the high resolution spectrometer MTR of the Solar telescope THEMIS (Teide Observatory, Canary Island) on the sodium D2 solar line . Observations lasted only 49 min because of cloudy weather. However, we could assess the instrumental velocity sensitivity, per pixel of 1 arcsec, and give a value of the amplitude of zonal wind at equator at .     

CCD photometry of 23 minor planets

We present CCD photometric observations of 23 main-belt asteroids, of which 8 have never been observed before; thus, the data of these objects are the first in the literature. The majority showed well-detectable light variations, exceeding 0^m1. We have determined synodic periods for 756 Lilliana (936), 1270 Datura (34), 1400 Tirela (1336), 1503 Kuopio (998), 3682 Welther (359), 7505 Furushu (414) and 11436 1969 QR (123), while uncertain period estimates were possible for 469 Argentina (123), 546 Herodias (104) and 1026 Ingrid (53). The shape of the lightcurves of 3682 Welther changed on a short time-scale and showed dimmings that might be attributed to eclipses in a binary system. For the remaining objects, only lower limits of the periods and amplitudes were concluded.     

The dust trail of Comet 67P/Churyumov-Gerasimenko between 2004 and 2006

We report on observations of the dust trail of Comet 67P/Churyumov-Gerasimenko (CG) in visible light with the Wide Field Imager at the ESO/MPG 2.2 m telescope at 4.7 AU before aphelion, and at with the MIPS instrument on board the Spitzer Space Telescope at 5.7 AU both before and after aphelion. The comet did not appear to be active during our observations. Our images probe large dust grains emitted from the comet that have a radiation pressure parameter β<0.01. We compare our observations with simulated images generated with a dynamical model of the cometary dust environment and constrain the emission speeds, size distribution, production rate and geometric albedo of the dust. We achieve the best fit to our data with a differential size distribution exponent of −4.1, and emission speeds for a β=0.01 particle of 25 m/s at perihelion and 2 m/s at 3 AU. The dust production rate in our model is on the order of 1000 kg/s at perihelion and 1 kg/s at 3 AU, and we require a dust geometric albedo between 0.022 and 0.044. The production rates of large (>) particles required to reproduce the brightness of the trail are sufficient to also account for the coma brightness observed while the comet was inside 3 AU, and we infer that the cross-section in the coma of CG may be dominated by grains of the order of .     

A global solution for the Mars static and seasonal gravity, Mars orientation, Phobos and Deimos masses, and Mars ephemeris

With the collection of six years of MGS tracking data and three years of Mars Odyssey tracking data, there has been a continual improvement in the JPL Mars gravity field determination. This includes the measurement of the seasonal changes in the gravity coefficients (e.g., , , , , , ) caused by the mass exchange between the polar ice caps and atmosphere. This paper describes the latest gravity field MGS95J to degree and order 95. The improvement comes from additional tracking data and the adoption of a more complete Mars orientation model with nutation, instead of the IAU 2000 model. Free wobble of the Mars' spin axis, i.e. polar motion, has been constrained to be less than 10 mas by looking at the temporal history of and . A strong annual signature is observed in , and this is a mixture of polar motion and ice mass redistribution. The Love number solution with a subset of Odyssey tracking data is consistent with the previous liquid outer core determination from MGS tracking data [Yoder et al., 2003. Science 300, 299-303], giving a combined solution of k₂=0.152±0.009 using MGS and Odyssey tracking data. The solutions for the masses of the Mars' moons show consistency between MGS, Odyssey, and Viking data sets; Phobos GM=(7.16±0.005)×¹⁰⁻⁴ km³/s² and Deimos GM=(0.98±0.07)×¹⁰⁻⁴ km³/s². Average MGS orbit errors, determined from differences in the overlaps of orbit solutions, have been reduced to 10-cm in the radial direction and 1.5 m along the spacecraft velocity and normal to the orbit plane. Hence, the ranging to the MGS and Odyssey spacecraft has resulted in position measurements of the Mars system center-of-mass relative to the Earth to an accuracy of one meter, greatly reducing the Mars ephemeris errors by several orders of magnitude, and providing mass estimates for Asteroids 1 Ceres, 2 Pallas, 3 Juno, 4 Vesta, and 324 Bamberga.     

The structure and time variability of the ring atmosphere and ionosphere

The saturnian system is subject to constant bombardment by interplanetary meteoroids and irradiation by solar UV photons. Both effects release neutral molecules from the icy ring particles either in the form of impact water vapor or gas emission in the form of H₂O, O₂ and H₂. The observations of the Cassini spacecraft during its orbit insertion have shown the existence of molecular and atomic oxygen ions. Subsequent modeling efforts have led to the picture that an exospheric population of neutral oxygen molecules is probably maintained in the vicinity of the rings via photolytic-decomposition of ice and surface reactions. At the same time, ionized products O⁺ and ions move along the magnetic field lines and, depending on the optical local thickness rings, can thread through the ring plane or impact a ring particle, the ion principal sink. In addition, collisional interactions between the ions and neutrals will change the scale height of the ions and produce a scattered component of O₂ molecules and O atoms which can be injected into Saturn’s upper atmosphere or the inner magnetosphere. The ring atmosphere, therefore, serves as a source of ions throughout Saturn’s magnetosphere. If photolysis of ice is the dominant source of O₂, then the complex structure of the ring atmosphere/ionosphere and the injection rate of neutral O₂ will be subject to modulation by the seasonal variation of Saturn along its orbit. In this work, we show how the physical properties of the ring oxygen atmosphere, the scattered component, and the magnetospheric ion source rate vary as the ring system goes through the cycle of solar insolation. In particular, it is shown that the magnetopheric ions should be nearly depleted at Saturn’s equinox if O₂ is produced mainly by photolysis of the ring material.     

Near infrared imaging spectroscopy of Venus with the Anglo-Australian Telescope

We have obtained full-disk spatially resolved spectra of the Venus nightside at near-infrared wavelengths during July 2007 using the Anglo-Australian Telescope and Infrared Imager and Spectrograph 2 (IRIS2). The data have been used to map the intensity and rotational temperature of the O₂(a¹Δ_g) airglow band at . The temperatures agree with those obtained in earlier IRIS2 observations and are significantly higher than expected from the Venus International Reference Atmosphere (VIRA) profile. We also report the detection of the corresponding ν=0-1O₂ airglow band at with a similar spatial distribution to the ν=0-0 band. Observations in the thermal window have been used to image surface topography using two different methods of cloud correction. We have also obtained images that can be used to study cloud motion.