〖HT2H〗低渗透砂岩油层相对渗透率曲线特征、影响因素及其对开发的影响

低渗透储层油、水两相渗透率特征及其影响因素的研究,是认识、分析低渗透储层油、水两相渗流机理的重要途径,是合理开发油田的基础。本文在总结低渗透油藏油水相对渗透率曲线特征的基础上,对以火山岩、凝灰岩岩屑为主的岩屑砂岩相对渗透率曲线特征进行研究,并分析了其影响因素,研究表明低渗透储层的岩石学特征,碎屑颗粒的成份、结构,其表面的粗糙程度,及其粘土矿物的产状对相对渗透率曲线有明显的影响。这一研究成果对合理开发此类低渗透油田有着十分重要的意义。     

羌塘盆地侏罗系低渗透碎屑岩储集层特征

羌塘盆地侏罗系碎屑岩主要包括三角洲相、滨海相和河流相砂体,岩性以细砂岩和粉砂岩为主。储层经历了较强的压实作用和胶结作用,颗粒间线—凹凸接触,胶结物主要为钙质和硅质,储集空间以次生溶孔为主,包括颗粒溶孔、粒间溶孔等,溶孔以中孔和小孔为主,喉道为细喉和微喉,构造裂缝的发育对改善储层的渗透性有重要作用。物性统计表明:孔隙度大多小于5%,渗透率小于1mD,为低孔、低渗储层。结合低渗储层分类标准,将碎屑岩储集层分为3类进行了评价,认为上侏罗统雪山组储层最好,其次为中侏罗统雀莫错组,而夏里组相对较差;最有利储集层发育区主要位于北羌塘坳陷西部中央隆起带北缘和盆地东部雀莫错地区,较有利储层发育区位于北羌塘坳陷中部和东部地区,南羌塘坳陷储集层较差。压实作用和胶结作用较强,后期溶蚀作用相对较弱,是造成目前低孔低渗储层的主要因素。     

川中广安地区上三叠统须六段储层特征及控制因素分析

广安地区上三叠统须六段为辫状河三角洲平原分流河道的大套砂岩复合体沉积,以中—细粒长石岩屑砂岩、岩屑砂岩为主;孔隙度主要分布在3%~15%之间,渗透率主要分布在0.01×10-3~1×10-3μm2之间。主、次分流河道为该区有效储层,复合砂体内渗透层与致密层交互分布形成了复杂的储层分布特征。在此基础上,结合成岩作用分析储层物性的影响因素认为,物源成分的不同影响储层发育富集区的分布,沉积演化特征控制储层发育层段,沉积微相控制层内非均质性。在煤系地层酸性环境下,强烈压实作用是形成普遍低渗的主要原因。主分流河道沉积的中、粗粒长石岩屑砂岩次生孔隙较发育,是主要的储层岩石类型。     

深水湖盆沉积砂体的层序地层分析--以四川侏罗系为例

层序地层学方法标志着沉积地质学最新的一次革命,作为多学科的方法融合,它把自源作用（来自沉积体系内部）和异源作用（来自沉积体系外部）分析,形成了统一模式来解释沉积盆地的演化和地层结构,并在油气勘探中得到广泛应用,这对于减少储层预测风险尤其有效。深水湖盆沉积砂体主要有三角洲前缘向深水斜坡的进积砂体、重力流砂体包括浊积水道砂体、浊积扇砂体和碎屑流砂体。非水道化的浊积砂体分布与盆地坡度、体系域演化密切相关,高坡度地区发育三角洲前缘向深水斜坡的滑塌浊积砂体,其他地区在湖侵早期和湖退晚期发育非水道化的湖底扇浊积砂体。层序体系域结构的重建和沉积机理的分析大大提高了沉积砂体的预测精度,减少储层预测风险。这些沉积砂体孔隙度低,渗透率也低,薄片观察发现极细砂为主。分选性中等,磨圆度次棱角状。碎屑成分主要为石英和石英岩岩屑,少许长石,另见方解石碎屑。胶结物主要为方解石。他们属于低孔低渗储集层,可以成为裂缝性油气藏和非常规油气资源的勘探目标。     

山东省牛庄洼陷古近系沙河街组沙三中亚段储集层成岩作用研究

山东省牛庄洼陷古近系沙河街组沙三中亚段储集层岩石类型以长石岩屑砂岩和岩屑长石砂岩为主,岩石结构成熟度和成分成熟度均较低。砂岩成岩作用包括压实作用、胶结作用、交代作用、溶解作用等。压实作用主要有刚性颗粒发生脆性破裂、颗粒之间呈线接触和凹凸接触、岩石碎屑颗粒呈明显的定向排列、塑性颗粒挤压变形或刚性颗粒嵌入变形颗粒中、粘土质碎屑被挤压变形发生假杂基化等五种表现形式。胶结物主要有泥质胶结物、碳酸盐胶结物、自生粘土矿物和自生石英、长石。交代作用主要有石英交代长石颗粒、碳酸盐胶结物交代石英、长石及岩屑颗粒、碳酸盐胶结物之间的相互交代。发生溶解作用的主要是石英、长石和岩屑颗粒,胶结物中主要是碳酸盐矿物。目前研究区沙三中亚段储集层成岩演化处于晚成岩A期。影响成岩作用的主要因素为岩石成分、沉积环境、孔隙流体性质等。成岩作用对储集物性的影响主要表现在孔隙度和渗透率的变化,其中压实作用和胶结作用使储层原生孔隙迅速减少、渗透率降低,使得储集物性变差;而溶解作用是次生孔隙发育的主要因素,从而改善砂岩的储集性能。     

鄂尔多斯盆地西峰地区长8砂岩微观非均质性的实验分析

通过真实砂岩微观模型实验,客观地分析了鄂尔多斯盆地西峰地区长8砂岩的微观非均质性特征,发现该区长8储层为致密型砂岩,直观地显示出长8砂岩储层具有很强的微观非均质性,砂岩的成岩作用和孔隙结构是影响鄂尔多斯盆地西峰地区长8砂岩储层微观非均质性的主要原因。在低渗透砂岩中,引起砂岩产生强烈的非均质性,而这些砂岩则形成长8砂岩储层的高渗带。     

The parent material of Sydney laterites

The petrography of laterites in the Sydney district shows that source rocks range from shales—in which quartz grains are not common and average about 0.03 mm in diameter—to sandstones, with generally abundant quartz grains which may average up to 0.5 mm in diameter. Ferricretes or iron‐cemented duricrusts occur in rocks with coarser quartz grains, such as the Tertiary river gravels of the Maroota area. The porosity and permeability of these rocks have considerably influenced the nature and profiles of the laterites. Two possible sources of sesquioxides in the laterites appear to be the Wianamatta Shale and, perhaps more importantly, basic igneous rocks.     

低渗透砂砾岩油层相对渗透率曲线的形态及其变化特征

以宝浪油田低渗透砂砾岩储层为例，主要分析了低渗透储层相对渗透率曲线的形态及变化特征和影响相对渗透率曲线形态变化的原因。分析结果表明，低渗透砂砾岩储层的非达西渗流使油相的相对渗透率增大，使水相的相对渗透率减小。孔隙结构的非均质性，特别是粘土矿物的含量和注入水水质对相对渗透率曲线的影响都很大。     

Changes in permeability of sand during triaxial loading: effect of fine particles production

Various mechanisms can affect the permeability of dense unconsolidated sands: Volumetric dilation can lead to permeability increase, whereas strain localization in shear bands may increase or decrease the permeability depending on the state of compaction and on the level of grains breakage inside the band. To investigate these various mechanisms, an experimental study has been performed to explore the effect of different factors such as grain size and grain shape, confining pressure, level of shear, stress path, and formation of one or several shear bands on the permeability of dense sands under triaxial loading. The experimental results show a reduction of permeability during the consolidation phase and during the volumetric contraction phase of shear loading, which can be related to the decrease of porosity. The experimental results also show that, depending on the confining pressure, the permeability remains stable or decreases during the volumetric dilation phase despite the increase of total porosity. This permeability reduction is attributed to the presence of fine particles, which result from grains attrition during pre-localization and grains breakage inside the shear band during the post-localization phase.     

塔里木盆地巴楚—麦盖提地区泥盆系储层特征及影响因素

通过钻井岩芯、岩石薄片及铸体薄片观察,结合压汞分析等手段,分析了塔里木盆地巴楚—麦盖提地区泥盆系储层岩石学特征及物性演化特征。研究结果表明:泥盆系储层岩性以石英砂岩、岩屑石英砂岩为主。泥盆系东河塘组沉积环境为滨岸沉积,前滨滩砂物性最好,原生孔隙发育,属于特低孔特低渗储层;克孜尔塔格组为三角洲--潮坪沉积,以水上分流河道砂体物性最好,次生孔隙发育,属于特低孔特低渗--低孔低渗储层。储层砂体中压实作用、硅质胶结作用十分普遍,硅质胶结多以加大边形式存在;碳酸盐胶结在储层中相对发育,充填于岩石孔隙或交代其他碎屑颗粒,降低储层孔隙度与渗透率,表现为破坏性成岩作用;溶解作用对储层影响较大,有助于提高储层物性,表现为建设性成岩作用。     

川西坳陷上侏罗统蓬莱镇组砂岩储层的成岩作用及对成藏的影响

勘探实践表明,川西坳陷上侏罗统蓬莱镇组的天然气聚集明显受成岩作用制约,天然气主要聚集在由于深埋成岩作用形成的溶蚀孔隙发育部位,主产气层大体分布在中两期溶蚀孔隙发育带上,溶蚀孔隙越发育,产能越高,胶结作用越强,次生矿物方解石, 含量越高,物性越差,岩性越致密,因此成岩作用制约了现今砂岩储层孔隙结构及演化方向,制约了气层的展布及成藏规模。     

Origin of Tafoni in the Late Cretaceous Aeolian Sandstones,Danxiashan UNESCO Global Geopark,South China

Tafoni occur generally in granular rocks around the world, but their origin remains controversial. In this study,the roles of lithology, micro–climate, and organism in tafoni development are investigated in the Danxiashan UNESCO Global Geopark of South China. The Jinshiyan Temple and Luyitang sites along the Jinjiang River are chosen to conduct tafoni morphometry, bedrock petrography, and micro–climate analyses. The research methods used in this study include field observations and measurements, Voronoi diagrams, polarizing microscopic and scanning electron microscopic(SEM)image analysis, and meteorological detection. The tafoni are mostly 2–10 cm in length and elliptical in shape. The Late Cretaceous Jinshiyan sandstones are characterized by a grain–to–grain contact fabric and moderate sorting with a high proportion of soluble grains and cements. The Voronoi diagrams developed through the Arc GIS software are largely consistent with the tafoni openings. Moreover, owing to exposure to solar insolation, the external temperature values are higher than the internal ones, while the external relative humidity values are lower than the internal ones. Therefore, the permeable Jinshiyan sandstones are fundamental for tafoni development, while the abundant moisture from the Jinjiang River and frequent rains is favorable for salt weathering in tandem with biological activities. At last, a five–stage development model is proposed for the tafoni progression in the study area.     

Feldspar albitization in Cretaceous non-marine mudrocks, Gyeongsang Basin, Korea

Plagioclases and K-feldspars in the sandstones and mudrocks of the Cretaceous non-marine Gyeongsang Basin, Korea, were partially to completely albitized. The preservation of fresh plagioclase grains in early micrite-cemented sandstones suggests the diagenetic origin of albite. Albitization textures in mudrocks were examined using backscattered electron images. In contrast to completely albitized plagioclase grains in sandstones, those in mudrocks are mostly partially albitized. It suggests that mudrocks can be more useful for a provenance study than sandstones by preserving detrital minerals better. K-feldspar is unaltered to partially albitized in both sandstones and mudrocks. In mudrocks albitization starts preferentially along microfractures, cleavages and grain margins. Albitization along grain margins seems to be a characteristic feature in mudrocks where development of microfractures in silt-sized feldspar grains by physical compaction is limited by clayey matrix as well as by overpressure. The extent of albitization in mudrocks is mainly controlled by composition of the detrital plagioclase. Mudrocks containing calcic plagioclase grains tend to be more extensively albitized than those containing sodic varieties.     

安塞油田长2油层成岩作用及其对储层物性的影响

安塞地区长2油层储层以中细粒长石砂岩为主，主要成岩矿物为绿泥石环边、方解石胶结物、石英和长石加大生长、伊利石、伊一蒙混层、钠长石和高岭石等。绿泥石环边的发育对原生粒间孔的保存起到有利的作用。石英加大级别达Ⅲ级，加大边含有丰富的有机包体，均一温度范围48．1～76．5℃，烃类进入储层的时间为早白垩世中期至晚白垩世。储层发育多种孔隙类型，面孔率平均为11．60％．主要类型有粒间孔、骨架颗粒溶孔和微裂缝等。残余粒间孔和骨架颗粒溶孔是本区长2储层的主要孔隙类型。根据成岩作用的矿物岩石学标志、有机质成熟度及古温度，将长2油层砂岩的成岩作用划分为3个成岩阶段：早成岩阶段、晚成岩阶段和表生成岩阶段。储层性质明显地受到沉积微相和成岩作用的影响，沉积物粒度较粗、厚度较大的分流河道储集物性明显优于各种粒度较细、厚度较薄的分流间席状砂体。     

早期碳酸盐胶结作用对砂岩孔隙演化的影响——以塔里木盆地满加尔凹陷志留系砂岩为例

塔里木盆地满加尔凹陷志留系砂岩为无障壁的潮坪、滨岸及辫状河三角洲沉积的岩屑砂岩和岩屑质石英砂岩,对满北和满东、满南地区志留系砂岩成岩作用序次尤其是碳酸盐胶结的时间、方式和特征、物性的对比研究认为:砂岩中碳酸盐胶结的时间早晚对砂岩孔隙演化具有重要影响,满北地区志留系砂岩发育有大量早期泥晶碳酸盐胶结,显微镜下研究表明这种胶结作用发生在岩石受到充分压实之前,呈基底式胶结,岩石颗粒呈点接触或漂浮状分布于早期碳酸盐胶结物之中,这种胶结作用抑制了岩石后期的压实作用。尽管目前其埋藏达5 000～6 500 m,但其经历的压实作用并不强烈,粒间发育大量早期的碳酸盐胶结物,后来这些胶结物被溶蚀,形成了大量次生孔隙。而在满东和满南地区的志留系砂岩,碳酸盐胶结发生在岩石经过充分压实之后,晚期的碳酸盐胶结物仅分布于岩石经充分压实后的粒间孔隙中,含量较前者低,后期可供溶蚀的碳酸盐比前者少,因而溶蚀形成的次生孔隙有限。因此,尽管满东满南地区志留系埋藏比满北浅（3 700～5 000 m）,碳酸盐胶结物含量也低,也发育晚期碳酸盐胶结物的溶蚀,但岩石的压实作用比满北强,物性比满北低差。这主要与碳酸盐胶结的早晚有关,早期碳酸盐胶结对孔隙演化具有明显控制作用,有利于岩石孔隙的保存,为后来的溶蚀形成次生孔隙提供了条件。     

真实砂岩微观模型实验在白豹地区长4+5砂岩微观非均质性研究中的应用

油气储层的微观非均质性特征是储层地质学研究的重要内容之一.通过真实砂岩微观模型实验,分析了鄂尔多斯盆地白豹地区长4 5储层的微观非均质性特征,发现该区长4 5储层为致密型砂岩,真实砂岩微观模型实验直观地显示出长4 5储层具有很强的微观非均质性,砂岩的成岩作用和孔隙结构是影响本区长4 5储层微观非均质性的主要原因.在低渗透砂岩中,溶蚀作用引起砂岩产生强烈的非均质性,而这些砂岩则形成长4 5储层的高渗带.     

川东北元坝地区须家河组石英砂岩沉积与储层特征

在川东北元坝及周边地区首次发现纯净的石英砂岩沉积,石英砂岩厚度10~15 m左右。研究表明,石英砂岩主要以夹层形式出现在须一、二段,但沉积环境相当特殊,主要为海泛或湖泛早期沉积的滩坝砂体,不属于须家河组广泛发育的三角洲沉积体系,石英砂体呈近东西向展布,明显受到米仓山-大巴山前陆前渊带的控制。石英砂岩以粉-细砂为主,分选好,磨圆度高,杂基含量低,具有较高的成熟度,与其它地区不同,研究区石英砂岩具有良好的储集性能,其主要原因是由于石英砂岩中石英颗粒内具有高密度原生微裂缝,这些原生裂缝在沉积后成岩过程中可能闭合,但在后期的构造挤压背景下石英砂岩的脆性特性及破碎颗粒容易导致大量裂缝发育,裂缝的发育同时促进原生裂缝充填物和粒间填屑物的溶蚀,形成以裂缝为主的孔隙性储层。在研究区具有裂缝的石英颗粒并不局限在石英砂岩,我们推测具有裂缝的石英与物源有关。     

砂岩早期核心式碳酸盐胶结作用的成像测井证据

早期碳酸盐胶结作用是库车坳陷新生界浅埋藏河流相砂岩内除机械压实外目前正在进行的主要成岩作用,高分辨率电阻率成像测井资料为研究其特征及成因提供了重要的地球物理证据。在电阻率成像测井图像上,早期碳酸盐胶结物呈圆形、椭圆形或不规则斑块状、葡萄状等形态出现,多数顺层理方向分布,其产状有孤立状或分散状斑块、断续胶结纹层和连续胶结纹层等。它们可以发育于砂岩层顶部或底部,也可以与疏松未胶结或弱胶结砂岩呈互层或夹层状交替分布。早期碳酸盐胶结物的沉淀采取核心式胶结模式,即胶结物首先围绕少数核心沉淀,呈斑块状逐渐向外增生,直至从各个核心生长出来的碳酸盐胶结斑块相互靠近和连生导致砂岩层被完全胶结为止。砂体或砂层被碳酸盐胶结的过程遵循由外向内 (由砂体边缘向砂体中心 )、由高渗透纹层向低渗透纹层、由局部胶结核心向周围孔隙增生的规律.     

Pore-Throat Combination Types and Gas-Water Relative Permeability Responses of Tight Gas Sandstone Reservoirs in the Zizhou Area of East Ordos Basin,China

With the aim of better understanding the tight gas reservoirs in the Zizhou area of east Ordos Basin, a total of222 samples were collected from 50 wells for a series of experiments. In this study, three pore-throat combination types in sandstones were revealed and confirmed to play a controlling role in the distribution of throat size and the characteristics of gas-water relative permeability. The type-Ⅰ sandstones are dominated by intercrystalline micropores connected by cluster throats, of which the distribution curves of throat size are narrow and have a strong single peak(peak ratio 30%). The pores in the type-Ⅱ sandstones dominantly consist of secondary dissolution pores and intercrystalline micropores, and throats mainly occur as slice-shaped throats along cleavages between rigid grain margins and cluster throats in clay cement.The distribution curves of throat size for the type-Ⅱ sandstones show a bimodal distribution with a substantial low-value region between the peaks(peak ratio 15%). Primary intergranular pores and secondary intergranular pores are mainly found in type-Ⅲ samples, which are connected by various throats. The throat size distribution curves of type-Ⅲ sandstones show a nearly normal distribution with low kurtosis(peak ratio 10%), and the micro-scale throat radii(0.5 μm) constitute a large proportion. From type-Ⅰ to type-Ⅲ sandstones, the irreducible water saturation(Swo) decreased; furthermore, the slope of the curves of Krw/Krg in two-phase saturation zone decreased and the two-phase saturation zone increased,indicating that the gas relative flow ability increased. Variations of the permeability exist in sandstones with different porethroat combination types, which indicate the type-Ⅲ sandstones are better reservoirs, followed by type-Ⅱ sandstones and type-Ⅰ sandstones. As an important factor affecting the reservoir quality, the pore-throat combination type in sandstones is the cumulative expression of lithology and diagenetic modifications with strong heterogeneity.     

The Analysis of Compression–Shear Infiltration Characteristics of Joint Rock Under Different Load Conditions

To obtain the compression–shear infiltration characteristics of joint rock, the coupled compression–shear infiltration tests of samples were carried out under different loading and boundary conditions. The shear dilatation, permeability and the change laws of hydraulic opening of jointed rockmass were obtained under different normal stiffness and loading conditions. It is shown that the contact area gradually becomes smaller and smaller with the relative sliding of two jointed surfaces. And the contact ratio is down to a minimum value when the main processes of the jointed surface reach the peak shear strength. The remaining main processes is gradually destroyed, the contact ratio of joint surface becomes larger after the main processes reaches the peak strength. The contact ratio tends to be stable until all processes were all destroyed. Due to the influence of the joint surface protrusion, the normal displacement is smaller and then increases with the increase of shear displacement. The less the stiffness of jointed rock mass is, the greater the over water area of the joint surface is, the greater the permeability is, the greater the final stability value of the hydraulic opening degree is. The theoretical basis is provided for the fractured rock mass formed of permeable channels, initiation and outbreak of permeability disaster evolution process.