碳酸盐岩断裂相分类特征——以新疆塔里木盆地柯坪露头为例

断裂相的概念为断裂带的内部结构研究提供了新的思路与建模方法,通过塔里木盆地柯坪露头断裂带的分析,碳酸盐岩断裂相特征有别于碎屑岩.柯坪露头碳酸盐岩断裂带不连续构造以滑动面、裂缝带和变形带发育为特征.根据形态识别出平直截切型、弯曲起伏型、渐变条带型三种类型滑动面.破碎带中裂缝带发育,裂缝充填少,是良好输导通道;断层核部存在...     

下扬子地区青龙群上部角砾岩成因问题

1989—1990年,安徽省地质科学研究所与德国下萨克森州不伦瑞克大学地质古生物研究所在下扬子地区合作进行了中三叠统的蒸发岩沉积特征及含钾性评价的研究,对下扬子地区青龙群上部(东马鞍山组)地表角砾岩层进行了详细的野外地质工作。我们认为这套以往一直被看作盐溶倒塌成因的角砾岩,主要是碎屑流沉积的结果,有少量构造角砾岩、膏溶崩坍角砾岩。碎屑流沉积发育于长江北岸的宿松、安庆、巢湖、无为和长江南岸的贵池、铜陵、繁昌、南京、镇江、溧阳等地,呈北东—南西向带状展布,分布广泛、规模大,最大沉积厚度超过百米以上,十分引人注目。     

Inner structure and deformation mechanisms of normal faults in conglomerates and carbonate grainstones (Granada Basin,Betic Cordillera,Spain): Inferences on fault permeability

In the southeastern area of the Neogene-Quaternary Granada Basin, ∼E–W trending normal faults crosscut ∼80 m-thick clay-bearing conglomerates and ∼30–40 m-thick carbonate grainstones containing centimeter-thick microconglomerate and sand interbeds. Three fundamental failure modes took place during fault nucleation: (1) phyllosilicate shear banding in the conglomerates, (2) jointing, mainly in the carbonate grainstones and (3) pressure solution in the carbonate matrix and grains of the microconglomerate and sand interbeds. Within the conglomerates, normal faults developed by pronounced clay smearing and, ultimately, cataclasis. Jointing also occurred within some of the pebbles surrounding the cataclastic rocks. In contrast, in the carbonate grainstones fault growth was characterized by predominant jointing and rock fragmentation, which localized in the extensional quadrants and/or releasing jogs of the evolving slip surfaces. Brecciation and cataclasis occurred only around the well-developed slip surfaces. Based upon their inner structure, we qualitatively assign a combined barrier-conduit fluid behavior to the tens of meters-throw normal faults juxtaposing the conglomerates against the carbonate grainstones. The inner fault cores inhibit fault-orthogonal fluid flow along their entire length. Instead, fault damage zones act as fluid barriers in the conglomerates, and as composite fluid conduits in the carbonate grainstones.     

Tectonic implications of damage zone-related fault-fracture networks revealed in drill core through the Nojima fault, Japan

1800 m of drill core through the Nojima fault zone, Japan, reveals subsidiary fault and fracture networks that developed in the fault zone that triggered the 1995 Ms 7.2 Kobe earthquake. The subsidiary fault zones contain a fault gouge of < 1 cm bounded by thin zones of foliated cataclasite or breccia. Fractures are filled with calcite veins, calcite-cemented breccias, clay, and iron-oxide and carbonate alternation of the granitic host rock. These features are typical of extensional fractures that form the conduit network for fluid flux close to a major fault zone. The zone of distributed deformation surrounding the main fault is 50 m in width, and the dip of the Nojima fault at > 1 km depth is 75°. The fault-fracture networks associated with the Nojima fault zone are coseismic and were filled with carbonate and fine-grained material during repeated seismic-related infiltration of the fault zone by carbonate-bearing subsurface water. This study shows that fault-related fracture networks plays an important role as fluid flow conduits within seismically active faults, and can change in character from zones of high permeability to low permeability due to cementation and/or pore collapse.     

碳酸盐岩内断裂带结构及其与油气成藏

以野外观察描述为手段,系统研究了碳酸盐岩断裂变形机制的影响因素及断裂带结构演化过程,剖析了碳酸盐岩地层中断裂带结构与流体运移的关系。研究表明,影响碳酸盐岩内断裂变形机制的因素包括岩性、孔隙度、变形深度、温度、胶结作用、先存裂缝等,控制断裂带结构形成的因素包括滑动位移和破裂模式等。低孔隙度碳酸盐岩以裂缝发育为主,高孔隙度碳酸盐岩变形早期产生变形带,带内裂缝联接逐渐发育成断层带。随着埋藏深度的增加,断裂带结构不同：埋藏深度小于3 km,断层核主要发育无内聚力的断层角砾岩和断层泥;埋藏深度大于3 km,断层核普遍发育有内聚力的断层角砾岩和碎裂岩,破碎带发育多种成因的裂缝。随着位移的增加,破裂模式从早期的破裂作用变为后期的碎裂作用,最终形成碎裂流。断裂带演化是一个四维过程,断层核和破碎带发育情况直接影响断层对油气的运移和封闭的作用。断裂变形机制、断裂带内部结构以及与流体运移关系的研究,都可为封闭性提供重要的理论依据。     

鲁西隆起区奥陶系碳酸盐岩成岩作用及其对储集性的控制作用

以鲁西隆起区奥陶系碳酸盐岩沉积旋回与不整合面分析为基础, 应用薄片、铸体和阴极发光等室内分析技术, 对其成岩作用、成岩序列、孔隙演化及其特征进行了详细研究。研究区的成岩作用分为两类: 建设性成岩作用和破坏性成岩作用, 前者包括白云石化、压溶、去石膏化、溶蚀和破裂等作用; 后者以重结晶、胶结、压实、硅化和充填作用为主。奥陶系碳酸盐岩经历了多期次和多种类型的成岩作用演化, 与马家沟组相比, 三山子组多经历了一次其沉积后的短期表生和随后的埋藏作用。三山子组白云岩、马家沟组东黄山段、土峪段和阁庄段粉细晶白云岩以及八陡段不整合面以下的溶蚀角砾岩段发育次生孔洞缝系统, 是较为有利的储集层段。     

塔东北库鲁克塔格地区中上寒武统白云岩类型与孔隙演化*

对塔东北库鲁克塔格隆起的乌孜里塔格剖面中上寒武统白云岩的岩石学、成岩作用、裂隙—孔隙发育与充填等特征研究认为：可划分为有序度逐渐增加的粉晶白云岩、粉细晶白云岩、中细晶白云岩和中粗晶白云岩及晶洞中的中粗晶、巨晶和鞍形白云石等4种类型;分别对应于早期准同生—浅埋、中浅埋藏、中等埋藏和构造断裂—热液（热卤水）作用4期的成岩阶段;其中,沿走滑断裂—裂隙带、呈不规则的“侵入体” 具有斑点状、条纹—条带、雁行状—斑马、角砾状和不规则状结构的中粗晶、粗晶、巨晶（部分为鞍形）白云岩（石）,一般不发光或呈昏暗的暗红色,具有与加拿大西部盆地典型的热液白云岩相似的特征;中上寒武统白云岩存在4～5期构造裂隙和3期以上的充填作用;热液白云岩中以晶间孔、晶间溶孔（洞）、裂隙及沿裂隙的扩溶孔洞为主,主要有二世代的白云石和方解石和少量沥青、石英、微量硬石膏和重晶石等多期充填作用。与西加盆地寒武系部分或全部交代充填缝洞及角砾构造、受来自落基山造山带的晚白垩世至古近系拉腊米（Laramide）构造的被排驱的热液流体交代形成的典型热液白云岩稍有不同,海西晚期（晚二叠世）及燕山—喜马拉雅期（晚白垩世—第四纪）沿挤压—走滑断裂排驱的地层热卤水循环—扩散与交代作用可能是本区热液白云岩的主要成因,储集空间主要由中、晚期构造断裂—裂隙（溶蚀）所致,但不排除成岩早期埋藏或晚期大气水作用对其影响。     

Fluid overpressure along an Oligocene out-of-sequence thrust in the Shimanto Belt,SW Japan

Out-of-sequence thrusts (OSTs) exposed in ancient accretionary prisms are considered as fossil analogs of present-day megasplay faults in subduction margins and can provide direct information about the conditions of deformation during thrust activity. In modern as well as in ancient accretionary prisms, first-order megasplay faults or OSTs truncate or merge with faults of lesser importance called second-order OSTs. Structural analysis of the Makinokuchi fault, a branch of an Oligocene to lower Miocene second-order OST in the Tertiary Shimanto Belt of central Kyushu, SW Japan, brings information about the conditions of deformation at the time of thrusting. The studied exposure shows that the fault footwall and, to a much lesser extent, the fault hanging-wall, consist of quartz-cemented syntectonic dilatant hydraulic breccias testifying to pore fluid pressures larger than the least principal stress component. The footwall sandstones are crossed by several centimeters thick quartz veins that merge with the footwall breccias. The continuity between the veins and the breccias suggest that the veins acted as conduits which likely collected fluids from the footwall side sandstones upward and toward the fault. Fluid inclusions indicate that the quartz cementing the breccias and that filling the feeder veins crystallized from similar fluids and under similar pressure and temperature conditions (245–285 °C and 5–8 km depth). These similarities suggest that the fluids responsible for syn-tectonic hydraulic brecciation were collected from the footwall through the conduits. The fluid inclusion trapping temperatures are close to the temperatures expected to be reached along the seismogenic zone. Our analysis shows that fluid overpressures can play a key role in the growth and activity of second-order OSTs in accretionary prisms and suggests that fluids collected along second-order OSTs or splay faults may flow upward along first-order OSTs or megasplay faults.     

Influence of host lithofacies on fault rock variation in carbonate fault zones: A case study from the Island of Malta

Relatively few studies have examined fault rock microstructures in carbonates. Understanding fault core production helps predict the hydraulic behaviour of faults and the potential for reservoir compartmentalisation. Normal faults on Malta, ranging from <1 m to 90 m displacement, cut two carbonate lithofacies, micrite-dominated and grain-dominated carbonates, allowing the investigation of fault rock evolution with increasing displacement in differing lithofacies. Lithological heterogeneity leads to a variety of deformation mechanisms. Nine different fault rock types have been identified, with a range of deformation microstructures along an individual slip surface. The deformation style, and hence type of fault rock produced, is a function of host rock texture, specifically grain size and sorting, porosity and uniaxial compressive strength. Homogeneously fine-grained micrtie-dominated carbonates are characterised by dispersed deformation with large fracture networks that develop into breccias. Alternatively, this lithofacies is commonly recrystallised. In contrast, in the coarse-grained, heterogeneous grain-dominated carbonates the development of faulting is characterised by localised deformation, creating protocataclasite and cataclasite fault rocks. Cementation also occurs within some grain-dominated carbonates close to and on slip surfaces. Fault rock variation is a function of displacement as well as juxtaposed lithofacies. An increase in fault rock variability is observed at higher displacements, potentially creating a more transmissible fault, which opposes what may be expected in siliciclastic and crystalline faults. Significant heterogeneity in the fault rock types formed is likely to create variable permeability along fault-strike, potentially allowing across-fault fluid flow. However, areas with homogeneous fault rocks may generate barriers to fluid flow.     

Long-term fluid circulation in extensional faults in the central Catalan Coastal Ranges: P–T constraints from neoformed chlorite and K-white mica

The neoformation of chlorite and K-white mica in fault rocks from two main faults of the central Catalan Coastal Ranges, the Vallès and the Hospital faults, has allowed us to constrain the P–T conditions during fault evolution using thermodynamic modeling. Crystallization of M1 and M2 muscovite and microcline occured as result of deuteric alteration during the exhumation of the pluton (290 °C > T > 370 °C) in the Permian. After that, three tectonic events have been distinguished. The first tectonic event, attributed to the Mesozoic rifting, is characterized by precipitation of M3 and M4 phengite together with chlorite and calcite C1 at temperatures between 190 and 310 °C. The second tectonic event attributed to the Paleogene compression has only been identified in the Hospital fault with precipitation of low-temperature calcite C2. The shortcut produced during inversion of the Vallès fault was probably the responsible for the lack of neoformed minerals within this fault. Finally, the third tectonic event, which is related to the Neogene extension, is characterized in the Vallès fault by a new generation of chlorite, associated with calcite C4 and laumontite, formed at temperatures between 125 and 190 °C in the absence of K-white mica. Differently, the Hospital fault is characterized by the precipitation of calcite C3 during the syn-rift stage at temperatures around 150 °C and by low-temperature fluids precipitating calcites C5, C6 and PC1 during the post-rift stage. During the two extensional events (Mesozoic and Neogene), faults acted as conduits for hot fluids producing anomalous high geothermal gradients (50 °C/km minimum).     

Electrical resistivity tomography (ERT) of a coastal carbonate aquifer (Port-Miou, SE France)

As part of a larger regional research program “KarstEAU”, the authors have applied electrical resistivity tomography (ERT) techniques to characterize heterogeneities in the Port-Miou coastal karst aquifer (Cassis, SE France). Field surveys were carried out on intensely fractured and karstified Urgonian carbonates. Extensive research has characterized macro- and micro-scale geology of the Port-Miou area and particularly underground water-filled conduits and fault/fracture and karst systems within a former quarry. The authors applied 2D ERT along two surface profiles of length 420 and 595 m to test capability for delineating subsurface conduits and possibly relationship between conduit and fault/fracture/karst orientation; and 3D ERT with a dense 120 electrode array at 1 m spacing (11 × 10 m) was applied over an area of the quarry that had been profiled using 3D georadar and which has had intensive nearby structural geological interpretation. The 2D profiling imaged several underground conduits at depths to >50 m below ground surface and below sea level, including possibly the main Port Miou submarine spring and smaller springs. The 2D profiling within the quarry provided a better understanding of the connectivity between major fractures and faults on the quarry walls and secondary springs along the coast supporting flow of the secondary springs along interpreted fracture orientations. In addition, 2D inversion-derived conductivity models indicate that high resistivity zones above sea-level are associated with non-saturated zones and low resistivity anomalies in the non-saturated zone are associated with residual clays in paleokarsts. A partitioned lower resistivity zone below sea-level can be associated with a higher porosity/permeability zone with fractures and karstic features. Inversion models of the dense 3D ERT data indicate a higher resistivity volume within the larger surveyed block. The survey characterized the non-saturated zone and the ERT resistivities are correlated with karst features interpreted by 3D georadar and visible in the inferior wall of the quarry.     

In situ stresses and natural fractures in the Northern Perth Basin,Australia

Present-day stress orientations in the Northern Perth Basin have been inferred from borehole breakouts and drilling-induced tensile fractures observed on image logs from eight wells. Stress indicators from these wells give an east – west maximum horizontal stress orientation, consistent with stress-field modelling of the Indo-Australian Plate. Previous interpretations using dipmeter logs indicated anomalous north-directed maximum horizontal stress orientations. However, higher-quality image logs indicate a consistent maximum horizontal stress orientation, perpendicular to dominant north – south and northwest – southeast fault trends in the basin. Vertical stress was calculated from density logs at 21.5 MPa at 1 km depth. Minimum horizontal stress values, estimated from leak-off tests, range from 7.4 MPa at 0.4 km to 21.0 MPa at 0.8 km depth: the greatest values are in excess of the vertical stress. The maximum horizontal stress magnitude was constrained using the relationship between the minimum and maximum horizontal stresses; it ranges from 8.7 MPa at 0.4 km to 21.3 MPa at 1 km depth. These stress magnitudes and evidence of neotectonic reverse faulting indicate a transitional reverse fault to strike-slip fault-stress regime. Two natural fracture sets were interpreted from image logs: (i) a north- to northwest-striking set; and (ii) an east-striking set. The first set is parallel to adjacent north- to northwest-striking faults in the Northern Perth Basin. Several east-striking faults are evident in seismic data, and wells adjacent to east-striking faults exhibit the second east-striking set. Hence, natural fractures are subparallel to seismically resolved faults. Fractures optimally oriented to be critically stressed in the present-day stress regime were probably the cause of fluid losses during drilling. Pre-existing north- to northwest -striking faults that dip moderately have potential for reactivation within the present-day stress regime. Faults that strike north to northwest and have subvertical dips will not reactivate. The east-striking faults and fractures are not critically stressed for reactivation in the Northern Perth Basin.     

鲁西地区奥陶系碳酸盐岩储集特征及主控因素

应用薄片、铸体和阴极发光等室内分析技术,对鲁西隆起奥陶系碳酸盐岩及济阳坳陷潜山奥陶系钻井岩心样品进行了成岩作用及储集特征详细研究。奥陶系碳酸盐岩原生孔隙消失殆尽,次生成因的孔、洞和缝是主要储集空间。其中裂缝储集层在各层段均有发育,但白云岩段优于其它岩性段;构造缝主要分布在构造轴部和断裂带附近,溶蚀缝在不整合面附近较为发育。孔洞型储集层主要发育在白云岩层段,以晶间孔、晶间溶孔和晶内溶孔为主要储集空间;有少量有效孔隙分布在灰岩段,以铸模孔、粒内溶孔和粒内孔为主。马家沟组八陡段顶部发育溶蚀角砾岩、纹层状结晶灰岩,砾间缝、晶间缝和溶洞为主要储集空间。白云岩段是奥陶系碳酸盐岩主要储集层段,构造因素、岩性和成岩作用(尤其是胶结作用和溶蚀作用)是造成奥陶系碳酸盐岩储集层剖面分布差异性的主要控制因素。     

Late Miocene normal faulting beneath the northern Nile Delta: NNW propagation of the Gulf of Suez Rift

The north Egyptian continental margin has undergone passive margin subsidence since the opening of Tethys, but its post-Mesozoic history has been interrupted by tectonic events that include a phase of extensional faulting in the Late Miocene. This study characterizes the geometry and distribution of Late Miocene normal faulting beneath the northern Nile Delta and addresses the relationship of this faulting to the north–northwestwards propagation of Red Sea–Gulf of Suez rifting at this time. Structural interpretation of a 2D grid of seismic reflection data has defined a Tortonian–Messinian syn-rift megasequence, when tied to well data. Normal fault correlations between seismic lines are constrained by the mapping of fault-related folds. Faults are evenly distributed across the study area and are found to strike predominantly NW–SE to NNW–SSE, with some N–S faults in the north. Faults are interpreted to be <10 km in length, typically in the range 3–6 km. This suggests that rifting in the northern Nile Delta did not proceed beyond a continental rift initiation phase, with distributed, relatively small-scale faults. This contrasts with the Gulf of Suez Rift, where faulting continued to a more evolved fault localization phase, with block-bounding faults >25 km in length. Results suggest that future studies could quantify fault evolution from rift initiation to fault linkage to displacement localization, by studying the spatial variation in faulting from the northern Nile Delta, south–southeastwards to the Gulf of Suez Rift.     

Evidence of hydrothermal fluid flow in a hyperextended rifted margin: the case study of the Err nappe (SE Switzerland)

This paper investigates hydrothermal fluid circulation in pre- and syn-tectonic sediments associated with detachments faults. The study area, located in the Err Nappe (SE-Switzerland), preserves a portion of the Adriatic distal margin. Two sites were studied in combining fieldwork, petrography, geochemistry and fluid inclusion analysis: the Piz Val Lunga and Fuorcla Cotschna areas. Both preserve relationships between a spectacularly exposed rift-related extensional detachment fault and its footwall and hangingwall that consist of extensional allochthons and syn- to post-tectonic sediments. These areas register a complex fluid flow history characterized by dolomitization, de-dolomitization, calcite cementation, dolomite and quartz veining and diffuse silicification. Meso- and micro-scale observations allow defining two steps in fluid evolution, which are related to Jurassic rift activity. A first carbonate-rich event occurred before the exhumation of the granitic basement, and this was followed by a second event marked by a change in the fluid towards a silica-dominated chemistry. Homogenization temperatures of fluid inclusions (average T_h = 120?130 °C), negative δ¹⁸O values and a radiogenic ⁸⁷Sr/⁸⁶Sr signatures of carbonate minerals support the hypothesis that both the pre-tectonic rocks constituting the allochthons and the syn-tectonic sediments overlying the detachment fault were crossed by a flux of over-pressured hydrothermal fluids originating from seawater that penetrated into the basement through fault and fracture systems. Field relationships show that this fluid circulation started latest in middle Early Jurassic time, when fault activity migrated from the proximal to the future distal margin. We propose that it evolved chemically as a result of the involvement of the granitic basement forming the footwall of the extensional detachment system. Hydrothermal activity continued until the Middle/Late Jurassic, when tectonic activity shifted outwards leading to the exhumation of mantle rocks. This paper provides an original contribution to better understand the complex evolution of hyperextended continental rift domains and to constrain their thermal regimes.     

Controls on maximum fluid overpressure defining conditions for mesozonal mineralisation

The mesozonal environment for mineralisation (∼10±5 km depth) occurs towards the base of the seismogenic zone in the upper continental crust which, in areas of strong fluid release, acts as a stressed elastic lid containing overpressured hydrothermal fluids derived from metamorphic dehydration at depth. Au–quartz lodes in this environment are hosted by fault–fracture meshes comprising dilatant extensional and extensional-shear fractures interlinked by low-displacement faults. They form in a range of tectonic regimes but are most extensively developed in compressional/transpressional settings. A brittle failure mode plot contrasting compressional and extensional stress regimes demonstrates that: (i) high fluid overpressures are easier to sustain in compressional regimes that also allow the highest amplitude fluid-pressure cycling; (ii) dilatant mesh structures serve as high-permeability conduits only under high fluid-pressure and low differential stress in the absence of through-going cohesionless faults that are well-oriented for reactivation; and, (iii) the critical interdependence of differential stress and sustainable overpressure ensures that changes in stress state are accompanied by fluid redistribution. The specialised circumstances allowing high-flux flow of overpressured fluids are generally short-lived and are terminated by the formation of through-going, favourably oriented faults.     

Basement controls on fault development in the Penola Trough,Otway Basin,and implications for fault-bounded hydrocarbon traps

The Penola Trough is an intensely faulted northwest – southeast-trending half-graben structure. It is bound to the south by the major listric Hungerford/Kalangadoo Fault system. Several large prominent faults observed in the Penola Trough show offset of basement at depth. These basement-rooted faults have exerted significant controls on the geometry of smaller intra-rift faults throughout the entire structural history of the area. Faulting of the basement was initiated during the initial rift event of the Late Jurassic – Early Cretaceous. Faulting first propagated through a pre-existing basement fabric oblique to the north – south extension direction prevalent during this time. This resulted in the formation of the Hungerford/Kalangadoo and St George Faults with a northwest – southeast and north-northeast – south-southwest trend, respectively. A series of east – west-trending basement faults subsequently initiated perpendicular to the north – south extension direction as extensional strain increased in magnitude. Significant displacement along these basement-rooted faults throughout the initial rift event was associated with the formation of a complex set of intra-rift faults. These intra-rift faults exhibit a broadly east – west orientation consistent with the interpreted north – south extensional direction. However, this east – west orientation locally deviates to a more northwest – southeast direction near the oblique-trending St George Fault, attributed to stress perturbation effects. Many of the intra-rift faults die out prior to the end of the Early Cretaceous initial rift event while displacement on basement faults continued throughout. Faulting activity during the Late Cretaceous post-rift fault event was almost exclusively localised onto basement faults, despite a significant change in extension direction to northeast – southwest. A high-density, en échelon array of northwest – southeast-trending fault segments formed directly above the St George Fault and the large east – west-trending basement faults contemporaneously reactivated. Seismic variance data show that post-rift fault segments that are hard-linked to the St George Fault at depth have propagated through near-surface units. Non-basement-linked post-rift fault segments that lie away from the St George basement have not. This suggests that recent fault activity has continued to occur preferentially along basement faults up to relatively recent times, which has significant implications for fault seal integrity in the area. This is empirically validated by our structural analysis of fault-dependent hydrocarbon traps in the area, which shows that partially breached or breached hydrocarbon columns are associated with basement faults, whereas unbreached hydrocarbon columns are not.     

Effects of fault activities on hydrocarbon migration and accumulation in the Zhu I Depression,Pearl River Mouth Basin,South China Sea

Faults can act as either conduits or barriers for hydrocarbon migration, because they have complicated anisotropic flow properties owing to their complicated three-dimensional structures. This study focuses on the Zhu I Depression, Pearl River Mouth Basin (PRMB), China. In this area, hydrocarbon migration and accumulation occurred over a relatively short period of time and were contemporaneous with fault activation, so the characteristics of hydrocarbon accumulations can be used to deduce the effect of active faults on hydrocarbon migration and accumulation. This study addresses the effect of fault activity on flow properties during hydrocarbon migration through a quantitative and comparative analysis of fault activity vs hydrocarbon accumulation. The fault slip rate and shale smear factor parameters were used to characterise faulting and elucidate its effect on hydrocarbon migration and accumulation. Active faults are generally excellent vertical conduits with strong fault activation resulting in vertical migration of most hydrocarbons and little preservation; traps near faults with fault slip rates greater than 20 m/Ma rarely contain commercial oil and gas accumulations. Faulting can form shale smear, which, if continuous, can act as a barrier to hydrocarbon migration. An active fault can allow hydrocarbon transport from deeper formations and to be trapped by continuous shale smear in shallower strata. Most of the oil and gas in the Zhu I Depression have accumulated near faults with a moderate fault slip rate (<20 m/Ma) and development of continuous shale smear (SSF<4–6).     

中国海相克拉通盆地内部走滑断裂发育特征及控藏作用

走滑断控油气藏作为一种全新类型油气藏,其勘探潜力已初步显现。在对中国三大海相克拉通盆地内部走滑断裂发育特征与控藏作用开展对比分析的基础上,揭示了塔里木盆地、四川盆地、鄂尔多斯盆地内部走滑断裂空间结构与活动特征的相似性与差异性,并结合盆地动力学演化特征探讨了不同盆地内部走滑断裂成因机制,系统分析了三大盆地内部走滑断裂的控藏作用:(1)中国三大海相克拉通盆地内部均发育中小尺度滑移距走滑断裂,普遍具有“纵向分层,平面分段,垂向多期叠加”的空间结构特征。(2)三大克拉通盆地内部走滑断裂体系具有成因、分布和期次的差异性。塔里木盆地内部走滑断裂体系形成时间早,演化时间长,在盆地北部具有“南北对接,东西分区”特征;鄂尔多斯盆地西南缘受燕山期(侏罗纪—白垩纪)陆内挤压影响,形成了北西西向走滑断裂体系;四川盆地受控于二叠纪峨眉山大地幔柱影响,在盆地内部先存基底断裂基础上,形成了北西向、北西西向、近东西向张扭型走滑断裂。(3)中国三大海相克拉通盆地内部走滑断裂对油气成藏和富集具有重要的控制作用。在控储方面,受断裂-流体耦合改造控制,可形成断控缝洞型储集体、断-溶缝洞型或断控裂缝-孔隙型储集体;在控圈方面,在碳酸盐岩地层中可形成断控缝洞型、断溶缝洞型岩性圈闭;在控运方面,走滑断裂产状高陡,可直接沟通烃源岩和储层,构成重要的油气垂向输导体系。     

The role of intrusions in the formation of Irish-type mineralisation

The Stonepark Prospect is located in County Limerick, south-central Ireland. Multiple zones of Zn–Pb mineralisation have been identified at Stonepark and these are approximately 5 km west of the Pallas Green Prospect. At Stonepark, the sulphide bodies are hosted within the Waulsortian Limestone and closely resemble other Irish-type deposits. The mineralisation is composed of pyrite-marcasite, sphalerite and galena with gangue Fe-dolomite and calcite cements. A key difference at Stonepark is the presence of Chadian-aged volcanic rocks (Knockroe Volcanics) that intrude into and overlie the Waulsortian Limestone. Subsequent hydrothermal brecciation of the Waulsortian Limestone and Knockroe intrusions resulted in the formation of tabular polymict breccia bodies containing mixed carbonate and clasts of intrusive rocks. These have then been overprinted by massive sulphide mineralisation. Further syn-mineralisation brecciation has overprinted the earlier breccias. Drilling has demonstrated a spatial relationship between the volume of intrusive rocks (dykes and polymict breccias) and Zn–Pb mineralisation. This association suggests that the intrusive rocks provided a mechanism for the introduction of the mineralising fluids into the breccia bodies. This is significant as to date no large controlling fault has been identified, as is seen at other Irish-type deposits. Further work is required to understand the alteration process of the intrusive rocks and how this may relate to the mineralising process.