Two-sided Variscan thrust tectonics in the Vosges Mountains,northeastern France

Abstract

Variscan convergence produced two-sided (bivergent) crustal-scale thrusting in the Vosges Mountains. In the northern Vosges the central polymetamorphic crystallines were thrust to the NW over Cambrian to Silurian low-grade and very low-grade metamorphic clastics. Synorogenic upper Devonian - lower Carboniferous turbidites and volcanics were folded into NW-vergent structures which display SE-dipping slaty cleavage. The entire sequence shows increasing metamorphism and deformation from NW to SE. Late right-lateral strike-slip faulting along the Lalaye-Lubine fault zone outlasted thrusting. In the southern Vosges a lower Carboniferous turbiditic basin that was fringed on the south by a volcanic arc was tectonically shortened by south-directed tectonic imbrication of slivers of varied rocks including ultramafics, gneissic basement, and synorogenic elastics. The increasing degree of deformation and metamorphism towards the north suggests a thrust contact with the polymetamorphic gneisses of the central Vosges. The final stages of Variscan convergence were accompanied by voluminous granitic plutonism and by faulting along NNE-SSW and E-W-trending strike-slip faults. The tectonic evolution reflects progressive Variscan closure of a previously extended basinal crust in a high-temperature regime.     

Metallogeny of the Mont-de-l’Aigle IOCG deposit, Gaspé Peninsula, Québec, Canada

The Mont-de-l’Aigle deposit is located in the northern part of Dome Lemieux, in the Connecticut Valley-Gaspé Synclinorium, Gaspé Peninsula, Québec. The Dome Lemieux is a subcircular antiform of Siluro–Devonian sedimentary rocks that is cut by numerous mafic and felsic sills and dikes of Silurian to Late Devonian age. Plutonism occurred in a continental within-plate extensional setting typical of orogenic collapse. The Cu−Fe (± Au) mineralization of Mont-de-l’Aigle occurs in veins, stockworks, and breccias. Mineralization is located near or within N−S and NW−SE faults cutting sedimentary rocks. IOCG mineralization postdates intrusions, skarns, hornfels, and epithermal mineralization typical of the southern part of the Dome Lemieux. The paragenetic sequence comprises: (1) pervasive sodic, potassic, chlorite, and silica alteration, (2) hematite, quartz, pyrite, magnetite, and chalcopyrite veins, stockworks and breccias and, (3) dolomite ± hematite veins and veinlets cutting the earlier mineralization. Intrusions display proximal sodic and potassic alteration, whereas sedimentary rocks have proximal decalcification, silicification, and potassic alteration. Both intrusive and sedimentary rocks are affected by a pervasive distal chlorite (± silica) alteration. The sulfur isotope composition of pyrite and chalcopyrite (δ³⁴S=−1.5 to 4.8‰) suggests that sulfur was derived mainly from igneous rocks. Fluid δ¹⁸O (−0.4 to 2.65‰) indicates meteoric or seawater that reacted with the country rocks. Mixing of hot magmatic fluids with a cooler fluid, perhaps meteoric or seawater is suggested for mineral deposition and alteration of the Mont-de-l’Aigle deposit. The mineralogy, alteration, and sulfur isotope composition of the Mont-de-l’Aigle deposit compare well with IOCG deposits worldwide, making the Mont-de-l’Aigle deposit a rare example of Paleozoic IOCG mineralization, formed at shallow depth, within a low metamorphic grade sedimentary rock sequence.     

Formation of chlorite during thrust fault reactivation. Record of fluid origin and P–T conditions in the Monte Perdido thrust fault (southern Pyrenees)

The chemical and isotopic compositions of clay minerals such as illite and chlorite are commonly used to quantify diagenetic and low-grade metamorphic conditions, an approach that is also used in the present study of the Monte Perdido thrust fault from the South Pyrenean fold-and-thrust belt. The Monte Perdido thrust fault is a shallow thrust juxtaposing upper Cretaceous–Paleocene platform carbonates and Lower Eocene marls and turbidites from the Jaca basin. The core zone of the fault, about 6 m thick, consists of intensely deformed clay-bearing rocks bounded by major shear surfaces. Illite and chlorite are the main hydrous minerals in the fault zone. Illite is oriented along cleavage planes while chlorite formed along shear veins (<50 μm in thickness). Authigenic chlorite provides essential information about the origin of fluids and their temperature. δ¹⁸O and δD values of newly formed chlorite support equilibration with sedimentary interstitial water, directly derived from the local hanging wall and footwall during deformation. Given the absence of large-scale fluid flow, the mineralization observed in the thrust faults records the P–T conditions of thrust activity. Temperatures of chlorite formation of about 240°C are obtained via two independent methods: chlorite compositional thermometers and oxygen isotope fractionation between cogenetic chlorite and quartz. Burial depth conditions of 7 km are determined for the Monte Perdido thrust reactivation, coupling calculated temperature and fluid inclusion isochores. The present study demonstrates that both isotopic and thermodynamic methods applied to clay minerals formed in thrust fault are useful to help constrain diagenetic and low-grade metamorphic conditions.     

2: Hydrothermal ore deposits related to post-orogenic extensional magmatism and core complex formation: The Rhodope Massif of Bulgaria and Greece

The Rhodope Massif in southern Bulgaria and northern Greece hosts a range of Pb–Zn–Ag, Cu–Mo and Au–Ag deposits in high-grade metamorphic, continental sedimentary and igneous rocks. Following a protracted thrusting history as part of the Alpine–Himalayan collision, major late orogenic extension led to the formation of metamorphic core complexes, block faulting, sedimentary basin formation, acid to basic magmatism and hydrothermal activity within a relatively short period of time during the Early Tertiary. Large vein and carbonate replacement Pb–Zn deposits hosted by high-grade metamorphic rocks in the Central Rhodopean Dome (e.g., the Madan ore field) are spatially associated with low-angle detachment faults as well as local silicic dyke swarms and/or ignimbrites. Ore formation is essentially synchronous with post-extensional dome uplift and magmatism, which has a dominant crustal magma component according to Pb and Sr isotope data. Intermediate- and high-sulphidation Pb–Zn–Ag–Au deposits and minor porphyry Cu–Mo mineralization in the Eastern Rhodopes are predominantly hosted by veins in shoshonitic to high-K calc-alkaline volcanic rocks of closely similar age. Base-metal-poor, high-grade gold deposits of low sulphidation character occurring in continental sedimentary rocks of synextensional basins (e.g., Ada Tepe) show a close spatial and temporal relation to detachment faulting prior and during metamorphic core complex formation. Their formation predates local magmatism but may involve fluids from deep mantle magmas.The change in geochemical signatures of Palaeogene magmatic rocks, from predominantly silicic types in the Central Rhodopes to strongly fractionated shoshonitic (Bulgaria) to calc-alkaline and high-K calc-alkaline (Greece) magmas in the Eastern Rhodopes, coincides with the enrichment in Cu and Au relative to Pb and Zn of the associated ore deposits. This trend also correlates with a decrease in the radiogenic Pb and Sr isotope components of the magmatic rocks from west to east, reflecting a reduced crustal contamination of mantle magmas, which in turn correlates with a decreasing crustal thickness that can be observed today. Hydrogen and oxygen isotopic compositions of the related hydrothermal systems show a concomitant increase of magmatic relative to meteoric fluids, from the Pb–Zn–Ag deposits of the Central Rhodopes to the magmatic rock-hosted polymetallic gold deposits of the Eastern Rhodopes.     

Young orogenic gold mineralisation in active collisional mountains, Taiwan

Gold-bearing vein systems in the high mountains of Taiwan are part of the youngest tectonic-hydrothermal system on Earth. Tectonic collision initiated in the Pliocene has stacked Eocene–Miocene marine sedimentary rocks to form steep mountains nearly 4 km high. Thinner portions of the sedimentary pile (∼5 km) are currently producing hydrocarbons in a fold and thrust belt, and orogenic gold occurs in quartz veins in thicker parts of the pile (∼10 km) in the Slate Belt that underlies the mountains. Metamorphic fluids (2–5 wt.% NaCl equivalent) are rising from the active greenschist facies metamorphic zone and transporting gold released during rock recrystallisation. Metamorphic fluid flow at the Pingfengshan historic gold mine was focussed in well-defined (4 km³) fracture zones with networks of quartz veins, whereas large surrounding volumes of rock are largely unveined. Gold and arsenopyrite occur in several superimposed vein generations, with ankeritic alteration of host rocks superimposed on chlorite–calcite alteration zones as fluids cooled and became out of equilibrium with the host rocks. Mineralising fluids had δ¹⁸O near +10‰, δ¹³C was between −1‰ and −6‰ and these fluids were in isotopic equilibrium with host rocks at ∼350°C. Ankeritic veins were emplaced in extensional sites in kink fold axial surfaces, formed as the rock mass was transported laterally from compressional to extensional regimes in the orogen. Rapid exhumation (>2 mm/year) of the Slate Belt is causing a widespread shallow conductive thermal anomaly without igneous intrusions. Meteoric water is penetrating into the conductive thermal anomaly to contribute to crustal fluid flow and generate shallow boiling fluids (∼250°C) with fluid temperature greater than rock temperature. The meteoric-hydrothermal system impinges on, but causes only minor dilution of, the gold mineralisation system at depth.     

Fluid evolution at the Variscan front in the vicinity of the Aachen thrust

Quartz–carbonate–chlorite veins were studied in borehole samples of the RWTH-1 well in Aachen. Veins formed in Devonian rocks in the footwall of the Aachen thrust during Variscan deformation and associated fluid flow. Primary fluid inclusions indicate subsolvus unmixing of a homogenous H₂O–CO₂–CH₄–(N₂)–Na–(K)–Cl fluid into a H₂O–Na–(K)–Cl solution and a vapour-rich CO₂–(H₂O, CH₄, N₂) fluid. The aqueous end-member composition resembles that of metamorphic fluids of the Variscan front zone with salinities ranging from 4 to 7% NaCl equiv. and maximum homogenisation temperatures of close to 400°C. Pressure estimates indicate a burial depth between 4,500 and 8,000 m at geothermal gradients between 50 and 75°C/26 MPa, but pressure decrease to sublithostatic conditions is also indicated, probably as a consequence of fracture opening during episodic seismic activity. A second fluid system, mainly preserved in pseudo-secondary and secondary fluid inclusions, is characterised by fluid temperatures between 200 and 250°C and salinities of <5% NaCl equiv. Bulk stable isotope analyses of fluids released from vein quartz, calcite, and dolomite by decrepitation yielded δD_H2O values from −89 to −113 ‰, δ¹³C_CH4 from −26.9 to −28.9‰ (VPDB) and δ¹³C_CO2 from −12.8 to −23.3‰ (VPDB). The low δD and δ¹³C range of the fluids is considered to be due to interaction with cracked hydrocarbons. The second fluid influx caused partial isotope exchange and disequilibrium. It is envisaged that an initial short lived flux of hot metamorphic fluids expelled from the epizonal metamorphic domains of the Stavelot–Venn massif. The metamorphic fluid was focused along major thrust faults of the Variscan front zone such as the Aachen thrust. A second fluid influx was introduced from formation waters in the footwall of the Aachen thrust as a consequence of progressive deformation. Mixing of the cooler and lower salinity formation water with the hot metamorphic fluid during episodic fluid trapping resulted in an evolving range of physicochemical fluid inclusion characteristics.     

Geological and structural controls on gold mineralization in the Tanami District, Northern Territory

Gold mineralization in the Tanami district is hosted within moderately northwest dipping turbiditic sedimentary and basaltic volcanic rocks of the Paleoproterozoic Mt. Charles Formation. The gold occurs within a complex sinistral wrench-fault array and associated veins and alteration haloes. The main mineralized faults have a northerly trend and dip steeply east. Subsidiary structures trend at 030° and 070° and dip towards the southeast. Paleostress calculations based on fault striation populations and geometry (strike and dip) of faults indicate that at the time of the mineralizing event, σ ₁ was sub-horizontal and SE–NW directed with σ ₂ subvertical. Structural studies indicate that the mineralization occurred after the regional folding event and synchronous with the emplacement of felsic dykes into the mine sequence. Gold veins in the Tanami district are interpreted to be part of an outer thermal aureole gold system that formed during the emplacement of granitoids in the nearby ∼1,815 to ∼1,799 Ma Frankenia and/or Coomarie domes. Economic gold mineralization occurred late in the paragenetic history of the district. Gold is hosted by quartz-carbonate veins within shear zones, and also in the surrounding sericite- quartz- pyrite ± carbonate-altered wallrocks. Gold-mineralized veins precipitated at depths of 3 to 6 km from high temperature (∼300°C), low salinity (∼5 wt% NaCl equivalent) fluids with low CO₂ contents. Barren quartz, dolomite and calcite veins that occur in pre- and post-mineralization thrust faults formed from high salinity (∼20 wt% NaCl equivalent), low temperature (∼120–150°C) basinal brines. Pyrite in the gold mineralized veins and alteration halos has lower δ ³⁴S values (6.8 to 12.5‰) than local diagenetic pyrite (17.8 to 19.2‰) or pyrite in pre-mineralization thrust faults (31.7 to 37.1‰). The mineralizing fluids are inferred to have contained a well-homogenized mixture of magmatic and sedimentary-derived sulfur. Editorial handling: D. Huston     

Fluid evolution during burial and Variscan deformation in the Lower Devonian rocks of the High-Ardenne slate belt (Belgium): sources and causes of high-salinity and C–O–H–N fluids

Fluid inclusions in quartz veins of the High-Ardenne slate belt have preserved remnants of prograde and retrograde metamorphic fluids. These fluids were examined by petrography, microthermometry and Raman analysis to define the chemical and spatial evolution of the fluids that circulated through the metamorphic area of the High-Ardenne slate belt. The earliest fluid type was a mixed aqueous/gaseous fluid (H₂O–NaCl–CO₂–(CH₄–N₂)) occurring in growth zones and as isolated fluid inclusions in both the epizonal and anchizonal part of the metamorphic area. In the central part of the metamorphic area (epizone), in addition to this mixed aqueous/gaseous fluid, primary and isolated fluid inclusions are also filled with a purely gaseous fluid (CO₂–N₂–CH₄). During the Variscan orogeny, the chemical composition of gaseous fluids circulating through the Lower Devonian rocks in the epizonal part of the slate belt, evolved from an earlier CO₂–CH₄–N₂ composition to a later composition enriched in N₂. Finally, a late, Variscan aqueous fluid system with a H₂O–NaCl composition migrated through the Lower Devonian rocks. This latest type of fluid can be observed in and outside the epizonal metamorphic part of the High-Ardenne slate belt. The chemical composition of the fluids throughout the metamorphic area, shows a direct correlation with the metamorphic grade of the host rock. In general, the proportion of non-polar species (i.e. CO₂, CH₄, N₂) with respect to water and the proportion of non-polar species other than CO₂ increase with increasing metamorphic grade within the slate belt. In addition to this spatial evolution of the fluids, the temporal evolution of the gaseous fluids is indicative for a gradual maturation due to metamorphism in the central part of the basin. In addition to the maturity of the metamorphic fluids, the salinity of the aqueous fluids also shows a link with the metamorphic grade of the host-rock. For the earliest and latest fluid inclusions in the anchizonal part of the High-Ardenne slate belt the salinity varies respectively between 0 and 3.5 eq.wt% NaCl and between 0 and 2.7 eq.wt% NaCl, while in the epizonal part the salinity varies between 0.6 and 17 eq.wt% NaCl and between 3 and 10.6 eq.wt% for the earliest and latest aqueous fluid inclusions, respectively. Although high salinity fluids are often attributed to the original sedimentary setting, the increasing salinity of the fluids that circulated through the Lower Devonian rocks in the High-Ardenne slate belt can be directly attributed to regional metamorphism. More specifically the salinity of the primary fluid inclusions is related to hydrolysis reactions of Cl-bearing minerals during prograde metamorphism, while the salinity of the secondary fluid inclusions is rather related to hydration reactions during retrograde metamorphism. The temporal and spatial distribution of the fluids in the High-Ardenne slate belt are indicative for a closed fluid flow system present in the Lower Devonian rocks during burial and Variscan deformation, where fluids were in thermal and chemical equilibrium with the host rock. Such a closed fluid flow system is confirmed by stable isotope study of the veins and their adjacent host rock for which uniform δ¹⁸0 values of both the veins and their host rock demonstrate a rock-buffered fluid flow system.     

Stable isotope and fluid inclusion evidence for the origin of the Brandberg West area Sn–W vein deposits, NW Namibia

The Brandberg West region of NW Namibia is dominated by poly-deformed turbidites and carbonate rocks of the Neoproterozoic Damara Supergoup, which have been regionally metamorphosed to greenschist facies and thermally metamorphosed up to mid-amphibolite facies by Neoproterozoic granite plutons. The meta-sedimentary rocks host Damaran-age hydrothermal quartz vein-hosted Sn–W mineralization at Brandberg West and numerous nearby smaller deposits. Fluid inclusion microthermometric studies of the vein quartz suggests that the ore-forming fluids at the Brandberg West mine were CO₂-bearing aqueous fluids represented by the NaCl–CaCl₂–H₂O–CO₂ system with moderate salinity (mean=8.6 wt% NaCl_equivalent).Temperatures determined using oxygen isotope thermometry are 415–521°C (quartz–muscovite), 392–447°C (quartz–cassiterite), and 444–490°C (quartz–hematite). At Brandberg West, the oxygen isotope ratios of quartz veins and siliciclastic host rocks in the mineralized area are lower than those in the rocks and veins of the surrounding areas suggesting that pervasive fluid–rock interaction occurred during mineralization. The O- and H-isotope data of quartz–muscovite veins and fluid inclusions indicate that the ore fluids were dominantly of magmatic origin, implying that mineralization occurred above a shallow granite pluton. Simple mass balance calculations suggest water/rock ratios of 1.88 (closed system) and 1.01 (open system). The CO₂ component of the fluid inclusions had similar δ ¹³C to the carbonate rocks intercalated with the turbidites. It is most likely that mineralization at Brandberg West was caused by a combination of an impermeable marble barrier and interaction of the fluids with the marble. The minor deposits in the area have quartz veins with higher δ ¹⁸O values, which is consistent with these deposits being similar geological environments exposed at higher erosion levels.     

Late Cretaceous exhumation history of an extensional extruding wedge (Graz Paleozoic Nappe Complex, Austria)

Late Cretaceous structures within the eastern Graz Paleozoic Nappe Complex define an extruding wedge with north-eastward directed thrusting in eastern portions and strike-slip shear along the margins. Stacking structures are overprinted by south-westward directed extension with low-grade metamorphic rocks in the hangingwall and high-grade basement rocks in the footwall. Pressure–temperature and structural data are obtained from successively opening quartz veins that record various stages of progressive deformation and metamorphism. Fluid inclusion data and related structures show that during extension isothermal decompression from ca. 550°C and 8 kbar down to ca. 450°C and 2 kbar was related to exhumation of rocks from deep crustal levels. The data point to a high geothermal gradient and explain condensed paleo-isotherms due to ductile normal faulting in the eastern areas of the Graz Paleozoic Nappe Complex. The investigated Late Cretaceous structural elements suggest that the Graz Paleozoic Nappe Complex decoupled from the surrounding basement units and operated as a large-scale extension–extrusion corridor that evolved prior to Miocene extrusion tectonics in the Eastern Alps.     

准噶尔西北缘前陆冲断带三叠纪-侏罗纪逆冲断裂活动的沉积响应

笔者从冲断活动的产物———各种成因扇体(冲积扇、水下扇、扇三角洲)出发,由160口单井剖面、15条联井剖面、8个层位平面渐次展开了准噶尔西北缘前陆冲断带三叠—侏罗纪逆冲断裂活动的沉积响应研究。三叠纪扇体在乌尔禾—夏子街地区发育叠置程度最好,T1b到T3b,其由盆内向盆缘老山方向退缩迁移明显,并具T1b到T2k1由盆缘向盆内、T2k2到T3b由盆内向盆缘迁移的2个进退波动变化。侏罗纪扇体在八道湾组最为发育,总体叠置关系较差,J1b到J2t,均呈由盆内向盆缘老山退缩沉积的退覆式迁移特征。三叠纪到侏罗纪,总体为由强到弱的退覆式冲断活动及扇体迁移模式,即随主要同生控扇断裂分布由盆缘向老山方向退缩迁移,冲断活动强度由盆缘向盆地方向逐渐减弱直至停息;相应地,各期扇体平面上分布规模渐小,总体呈由盆内向盆缘老山退缩迁移的沉积响应,两者耦合性良好。各类扇体的沉积分布受不同时期同生断裂活动的严格控制,其时空叠置及迁移规律的差异是红山嘴—车排子、克拉玛依—百口泉及乌尔禾—夏子街各构造带冲断作用地域性及作用强度差异性的沉积响应。进而引入“活动性指数”的概念与方法,对前陆冲断带同生断裂的冲断活动强度进行了定量化统计分析,并根据冲断推覆事件的地层、沉积标识划分出T1b-T3b、J1b-J2x、J2t三套构造层序,识别出三叠—侏罗纪的3个逆冲推覆幕、6次逆冲推覆事件。     

Incipient metamorphism and deformation in the Variscides of SW Dyfed, Wales: first steps towards isotopic equilibrium

Incipient metamorphism accompanying thrusting, folding and cleavage development has been investigated in a varied sequence of Palaeozoic sediments near the Variscan front in SW Dyfed, Wales. The aim was to evaluate a critical stage in the progression from heterogeneous sediment, whose detrital phases are neither in equilibrium with one another, nor with pore fluids, through indurated sedimentary rock to metamorphic rock comprising newly formed crystals that equilibrated with one another as they grew. Quartz veins are widely developed in the area, especially in the more psammitic lithologies, while finer grained rocks became cleaved during tectonic deformation. Mineralogical constraints and fluid inclusion measurements suggest maximum temperatures around 200-310d? C (slightly higher in the Marloes-Musselwick Thrust Sheet than in other parts of the structural succession) at depths of the order of 6-13 km. Quartz veins yield distinctly heavier oxygen isotopic compositions than detrital quartz grains in the adjacent wall rocks, although care must be taken in interpreting the data because slivers of detrital grains may become incorporated into veins, while matrix detrital grains may incorporate veinlets or rims of newly formed quartz. It is concluded that vein quartz grew in isotopic equilibrium with a fluid phase whose isotopic composition was primarily controlled by exchange with phyllosilicates, not detrital quartz grains. Vein and matrix quartzes from the Marloes-Musselwick Thrust Sheet are distinctly lighter (δ¹⁸O_veins=+14 to +18% and δ¹⁸O_matrix=+11 to +14%) than those from other thrust sheets (δ¹⁸O =+17 to +20% and +14 to +17%, respectively). We conclude that vein quartz and phyllosilicate grains in cleavage domains probably attained equilibrium with a locally buffered pore fluid at the peak of metamorphism, but many relict grains of different chemical and isotopic composition remained elsewhere in the rock. Local fluid migration along veins and through cleavage lamellae facilitated the attainment of equilibrium, but there is little evidence for large-scale infiltration of externally derived fluids. With further metamorphism the quartz in these rocks would attain an isotopic composition intermediate between that of the heavy vein material and light detritus which coexist here.     

Stable isotope geochemistry of Alpine ophiolites: a window to ocean-floor hydrothermal alteration and constraints on fluid–rock interaction during high-pressure metamorphism

 The subduction of hydrated oceanic lithosphere potentially transports large volumes of water into the upper mantle; however, despite its potential importance, fluid–rock interaction during high-pressure metamorphism is relatively poorly understood. The stable isotope and major element geochemistry of Pennine ophiolite rocks from Italy and Switzerland that were metamorphosed at high pressures are similar to that of unmetamorphosed ophiolites, suggesting that they interacted with little pervasive fluid during high-pressure metamorphism. Cover sediments also have oxygen isotope ratios within the expected range of their protoliths. In the rocks that escaped late greenschist-facies retrogression, different styles of sub-ocean-floor alteration may be identified using oxygen isotopes, petrology, and major or trace element geochemistry. Within the basalts, zones that have undergone high- and low-temperature sub-ocean-floor alteration as well as relatively unaltered rocks can be distinguished. Serpentinites have δ¹⁸O and δ²H values that suggest that they were formed by hydration on or below the ocean floor. The development of high-pressure metamorphic mineralogies in metagabbros occurred preferentially in zones that underwent sub-ocean-floor alteration and which contained hydrated, fine-grained, reactive assemblages. Given that the transformation of blueschist-facies metabasic rocks to eclogite-facies assemblages involves the breakdown of hydrous minerals (e.g. lawsonite, zoisite, and glaucophane), and will thus liberate considerable volumes of fluids, metamorphic fluid flow must have been strongly channelled. High-pressure (quartz+calcite±omphacite±glaucophane±titanoclinohumite) veins that cut the ophiolite rocks represent one possible channel; however, stable isotope and major element data suggest that they were not formed from large volumes of exotic fluids. Fluids were more likely channelled along faults and shear zones that were active during high-pressure metamorphism. Such strong fluid channelling may cause fluids to migrate toward the accretionary wedge, especially along the slab–mantle interface, which is probably a major shear zone. This may preclude all but a small fraction of the fluids entering the mantle wedge to flux melting. Additionally, because fluids probably interact with relatively small volumes of rock in the channels, they cannot "scavenge" elements from the subducting slab efficiently. Received: 28 January 1999 / Accepted: 2 February 1999     

A Sr isotope study on fluorite and siderite from post-orogenic mineral veins in the eastern Harz Mountains,Germany

Rb–Sr isotope data for siderite and fluorite from sediment-hosted epithermal mineral veins in the eastern Harz Mountains (Germany) are presented. Several fluorite and siderite-bearing paragenetic stages have been proposed for these veins, with the most important mineralization being related to a quartz–sulfide and a subsequent calcite–fluorite–quartz stage, which occurred at 226±1 and 209±2 Ma, respectively. Our Rb–Sr data do not permit the identification of distinct generations of siderite and fluorite, but rather reveal straight internal mixing relations, reflecting mixing of fluids or differential fluid–rock interaction processes. This indicates merely two significant phases of mineral deposition related to the quartz–sulfide and calcite–fluorite–quartz stages. It is shown that the Paleozoic sedimentary host rocks of the veins are the most likely source for the siderite Sr, whereas fluorite displays a two-component mixture between sedimentary Sr and radiogenic Sr derived from locally occurring Permian metavolcanic rocks. Editorial handling: B. Lehmann     

Fluid migration through thrust faults in the Helvetic nappes (Western Swiss Alps)

The δ¹⁸O, δ¹³C and ⁸⁷Sr/⁸⁶Sr values of calcite and organic matter were measured for carbonate mylonites from numerous thrusts in the Helvetic Alps. Carbonate mylonites in most of the thrusts retain essentially unaltered protolith δ¹⁸O and δ¹³C values, consistent with there having been little to no advection of isotopically distinct fluid through these faults. Only carbonate mylonites from the basal thrusts of the largest nappes have δ¹⁸O and/or δ¹³C values that differ from those of their protoliths. The zone of isotopic alteration/exchange is confined to c. 10 to 20 meters of these fault contacts. We propose the fluids that migrated through these faults contained variable amounts of organically derived carbon and radiogenic strontium, and were probably derived from dewatering of the sedimentary rocks and prograde metamorphic reactions in the nappes' root zones. Apart from the basal thrusts of the largest nappes that behaved as narrow, laterally extensive conduits for fluids, there is little isotopic evidence that large quantities of fluids passed through most of the carbonate-hosted thrusts in the Helvetic Alps. Received: 25 August 1998 / Accepted: 26 February 1999     

Rb-Sr and U-Pb systematics of metasedimentary carbonate rocks: The Paleoproterozoic Kuetsjarvi Formation of the Pechenga Greenstone Belt, Kola Peninsula

The Rb-Sr and U-Pb systematics have been studied in the metasedimentary carbonate rocks from the Paleoproterozoic Kuetsjarvi Formation. Samples were taken from the borehole drilled in the northern zone of the Pechenga Greenstone Belt in the northwestern Kola Peninsula. The carbonate section of the formation is made up of three units (from the bottom to top): (I) dolomite (68 m), (II) calcareous-dolomite (9 m), and (III) clayey calcareous (1 m) ones. Dolomites (Mg/Ca = 0.55–0.61) from the lowermost unit I contain 70.3–111 ppm Sr. Initial ⁸⁷Sr/⁸⁶Sr ratio in them varies within 0.70560–0.70623 and characterizes the primary continental-lacustrine carbonate sediments. Calcareous dolomites (Mg/Ca = 0.39–0.59) and dolomitic limestones of units II and III (Mg/Ca = 0.02–0.36) are enriched in Sr (285–745 and 550–1750 ppm, respectively). Initial ⁸⁷Sr/⁸⁶Sr ratios in these rocks (0.70406–0.70486 and 0.70407–0.70431, respectively) fall within the range typical of the Jatulian seawater, which indicates that the carbonate sediments of two upper units were formed in an open marine basin. Study of dolomites from unit I showed that the Svecofennian metamorphism more significantly affected the U-Pb systems of carbonate rocks as compared to their Rb-Sr systems. In the ²⁰⁷Pb/²⁰⁴Pb-²⁰⁶Pb/²⁰⁴Pb diagram, most data points corresponding to the carbonate constituent of dolomites define isochron with an age of 1900 ± 25 Ma (MSWD = 0.5). The same samples define a positive correlation in the ²⁰⁸Pb/²⁰⁴Pb-²⁰⁶Pb/²⁰⁴Pb plot. Since sedimentary carbonates usually do not contain Th, this correlation points to secondary enrichment of the studied dolomites in Th or thorogenic ²⁰⁸Pb. Hence, the obtained Pb-Pb dating can be regarded as the age of the Svecofennian metamorphic event. Three samples from dolomites of unit I lack any disturbance of the initial U-Th-Pb systematics, but their trend in the ²⁰⁷Pb/²⁰⁴Pb-²⁰⁶Pb/²⁰⁴Pb diagram deviates from the 1900 Ma isochron. Based on these samples, the model U-Pb premetamorphic age of the Kuetsjarvi carbonate sediments is 2075–2100 Ma. This interval is consistent with the age range of the Lomagundi-Jatulian event, which was responsible for the formation of carbonate sediments with high positive δ¹³C values.     

New constraints on fluid sources in orogenic gold deposits,Victoria, Australia

Fluid inclusion microthermometry, Raman spectroscopy and noble gas plus halogen geochemistry, complemented by published stable isotope data, have been used to assess the origin of gold-rich fluids in the Lachlan Fold Belt of central Victoria, south-eastern Australia. Victorian gold deposits vary from large turbidite-hosted ‘orogenic’ lode and disseminated-stockwork gold-only deposits, formed close to the metamorphic peak, to smaller polymetallic gold deposits, temporally associated with later post-orogenic granite intrusions. Despite the differences in relative timing, metal association and the size of these deposits, fluid inclusion microthermometry indicates that all deposits are genetically associated with similar low-salinity aqueous, CO₂-bearing fluids. The majority of these fluid inclusions also have similar ⁴⁰Ar/³⁶Ar values of less than 1500 and ³⁶Ar concentrations of 2.6–58 ppb (by mass) that are equal to or much greater than air-saturation levels (1.3–2.7 ppb). Limited amounts of nitrogen-rich fluids are present at a local scale and have the highest measured ⁴⁰Ar/³⁶Ar values of up to 5,700, suggesting an external or distinct source compared to the aqueous fluids. The predominance of low-salinity aqueous–carbonic fluids with low ⁴⁰Ar/³⁶Ar values, in both ‘orogenic’ and ‘intrusion-related’ gold deposits, is attributed to fluid production from common basement volcano-sedimentary sequences and fluid interaction with sedimentary cover rocks (turbidites). Aqueous fluid inclusions in the Stawell–Magdala deposit of western Victoria (including those associated with N₂) preserve mantle-like Br/Cl and I/Cl values. In contrast, fluid inclusions in deposits in the eastern structural zones, which contain more abundant shales, have elevated molar I/Cl ratios with maximum values of 5,170 × 10⁻⁶ in the Melbourne Zone. Br/I ratios in this zone range from 0.5 to 3.0 that are characteristic of fluid interaction with organic-rich sediments. The maximum I/Cl and characteristic Br/I ratios provide evidence for organic Br and I released during metamorphism of the shales. Therefore, the regional data provide strong evidence for the involvement of sedimentary components in gold mineralisation, but are consistent with deeper metamorphic fluid sources from basement volcano-sedimentary rocks. The overlying sediments are probably involved in gold mineralisation via fluid–rock interaction.     

The role of the Kupferschiefer in the formation of hydrothermal base metal mineralization in the Spessart ore district, Germany: insight from detailed sulfur isotope studies

The Spessart district (SW Germany), located at the southwestern margin of the Permian Kupferschiefer basin in Central Europe, hosts abundant stratabound and structurally controlled base metal mineralization. The mineralization styles identified are (1) stratabound Cu-Pb-Zn-(Ag) ores in Zechstein sedimentary rocks, (2) structurally controlled Cu-As-(Ag) ores in Zechstein sedimentary rocks, (3) crosscutting Co-Ni-(Bi)-As and Cu-Fe-As veins, (4) stratabound metasomatic Fe-Mn carbonate ores in Zechstein dolomite, (5) barren barite veins, and (6) Fe-Mn-As veins in Permian rhyolites. Building on previous work that involved mineralogical, textural, and chemical characterization of the major mineralization types, we have performed a comprehensive sulfur isotope study that applied both conventional and novel laser-ablation multi-collector inductively coupled plasma mass spectrometry techniques. The δ³⁴S values of sulfide minerals from the different ore types are consistently negative and highly variable, in the range between −44.5‰ and −3.9‰, whereas the δ³⁴S values of barite are all positive in the range between 4.7‰ and 18.9‰. Remarkably, stratabound and structurally controlled mineralization in Zechstein sedimentary rocks has the least negative δ³⁴S values, whereas vein-type deposits have consistently more negative δ³⁴S values. The observed pattern of sulfide δ³⁴S values can be best interpreted in terms of fluid mixing at the basement-cover interface. Hydrothermal fluids originating from the crystalline basement migrated upward along subvertical fault zones and were periodically injected into groundwaters that were flowing in the post-Variscan sedimentary cover. These groundwaters had interacted with the Zechstein sedimentary rocks, resulting in fluids characterized by elevated concentrations of reduced sulfur (with negative δ³⁴S values) and alkaline pH. Repeated mixing between both chemically contrasting fluids caused rapid and efficient precipitation of sulfide ore minerals in hydrothermal veins with highly variable but distinctly negative δ³⁴S values.     

Faulting and fluid flow in porous rocks and sediments: implications for mineralisation and other processes

Faults in sedimentary rocks can act as fluid pathways or barriers to flow and display a range of deformation styles. These features can be explained by behaviours observed in deformation experiments on sedimentary rocks that reveal a transition from dilatant brittle faulting and permeability enhancement to cataclasis and permeability reduction, with increasing porosity, grain size and confining pressure. This transition implies that faults in sedimentary rocks are unlikely to act as fluid pathways shallower than ~3 km, unless the sediments have undergone early cementation, or have been exposed following burial and uplift. This has important implications for many geological processes, including fluid circulation in geothermal systems, formation of sediment-hosted mineral deposits and earthquakes in subduction zones. Stratiform Zn–Pb deposits that have been interpreted as syngenetic, seafloor deposits could instead be interpreted as early epigenetic deposits representing the depth at which faults change from fluid pathways to barriers.     

Thrusting and sinistral wrenching in a pre-Eocene HP-LT Caribbean accretionary wedge (Samaná Peninsula,Dominican Republic)

The North Caribbean margin is an example of an oblique convergence zone where the currently exposed HP–LT rocks are systematically localised close to strike-slip faults. The petrological and structural study of eclogite and blueschist facies rocks of the peninsula of Samaná (Hispaniola, Dominican Republic) confirms the presence of two different metamorphic units. The former diplays low metamorphic grade (Santa Barbara unit), characterized by the assemblage albite - lawsonite (7.5 ± 2 kbar and 320 ± 80 °C). The latter (Punta Balandra unit), thrust over the first unit towards the NW, and is characterized by the occurrence of blueschist and eclogite facies assemblages (13 ± 2 kbar and 450 ± 70 °C), within oceanic metasediments. The isothermal retrograde evolution occurred in epidote-blueschist facies conditions (9 ± 2 kbar and 440 ± 60 °C). The late greenschist facies evolution is contemporaneous with conjugate NW–SE extension and E–W strike-slip faulting. This late extension is for regional dome and basin structures. According to their lithotectonic, structural and metamorphic characteristics, the metamorphic nappe stack of Samaná may be interpreted as a fragment of an accretionary wedge thrust onto the North American continental shelf. Evolution of the wedge was associated with the active subduction of the North American plate, under the Greater Antilles arc, at the level of the Puerto Rico trench. During active Late Cretaceous convergence, the HP rocks were initially exhumed, within the accretionary prism, by thrusting parallel to the NE–SW direction of convergence. Subsequently, during the Eocene collision between the Caribbean plate and the North American margin, the installation of a transtensive regime of E–W direction supports the local development of conjugate extension of NW–SE direction that facilitated the final phase of exhumation of the HP rocks.