The Study of the Varying Characteristics of Cathodic Regions for Defective Coating in 3.5% Sodium Chloride Solution by EIS and WBE

The current distributions over carbon steel under iron red alkyd primer exposed to 3.5% sodium chloride solution were mapped using the wire beam electrode(WBE). The electrochemical impedance spectroscopy(EIS) of the WBE was carried out to analyze the performance of coating delamination and corrosion behavior of carbon steel beneath defective coating. The EIS data revealed that protective capability of coating decreased with immersion time and the degree of cathodic delamination showed a rapid rise. The current density distribution of WBE indicated that cathodic sites was located at the defect at the beginning of immersion and gradually spread into the intact coating. The cathodic regions were distinguished from the anodic area and distributed over the WBE. The changes of cathodic sites could reflect the deterioration process of defective coating. The cathodic area ratio was a more useful parameter than the cathodic delamination degree to evaluate the coating cathodic delamination. The polarity reversals of electrodes at the defect and beneath coating were observed. A simple discussion of relationship between the blister and the polarity reversal was made from a standpoint of electrochemical distribution. WBE method was able to map and record the changes of local cathodic sites beneath defective coating in real time, which could provide more detailed information about the local degradation of coating.     

Surface modification of ZrO2 nanoparticles with styrene coupling agent and its effect on the corrosion behaviour of epoxy coating

The surface of ZrO2 nanoparticles was modified by styrene coupling grafting method to improve the dispersion and interaction of the nanoparticles with the epoxy coating in which the modified ZrO2 nanoparticles were used as an additive. The grafting performance and microstructure of the nano- ZrO2/epoxy coating were analyzed by Fourier transformation infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The corrosion behavior of the nano-ZrO2/epoxy coating on mild steel was evaluated in neutral 3.5 wt% NaC1 solution using electrochemical impedance spectroscopy （EIS）. Both the coating capacitance and coating resistance fitted by the equivalent circuit from EIS were used to evaluate the protective performance of the coating towards the mild steel. The results show a superior stability and efficient corrosion protection by the modified ZrO2 nanoparticles. The epoxy coating containing 2 wt% modified ZrO2 nanoparticles exhibited the best corrosion performance among all the coating specimens. This research may provide an insight into the protection of mild steel using modified epoxy coatings.     

Electrochemical corrosion behavior of hot dip coating in artificial seawater

INTR0DUCnONAlloycoatingscandetivelyproteCtsteelagainstcormsioninseri0uscormsionenvir-orunent,suchasthedrinesplashandtidalzones-TwoInainhodiptincaldrinumalloycOaingswidelyusedcommroiallyareGalfancoaing(contalningZn-5wt%kl-us)devel-oPedbytheIntemaionaltalZincReenhheZaionandhocoating(c0n-talningZn-55Wt%Al-1.6Wt%Si)develoPedbytheBethlehemSteelCorpOration-Anewrinc-basedalloycOaingdevel0PedbyNortheaStemUniversityisdiscussedinthesPaperbyelecthehendcalmethod.FromSun(l996),welmOWthecorms…     

Smart anticorrosion coating based on stimuli-responsive micro/nanocontainer: a review

Smart coating for corrosion protection of metal materials(steel,magnesium,aluminum and their alloys) has drawn great attention because of their capacity to prevent crack propagation in the protective coating by releasing functional molecules(healing agents or corrosion inhibitors) on demand from delivery vehicle,that is,micro/nanocontainer made up of a shell and core material or a coating layer,in a controllable manner.Herein,we summarize the recent achievements during the last 10 years in the field of the micro/nanocontainer with different types of stimuli-responsive properties,i.e.,pH,electrochemical potential,redox,aggressive corrosive ions,heat,light,magnetic field,and mechanical impact,for smart anticorrosion coating.The state-of-the-art design and fabrication of micro/nanocontainer are emphasized with detailed examples.     

ELECTROCHEMICAL STUDY ON CORROSION BEHAVIOUR OF STEELS IN SAND WITH WATER

ImooUcr0NCormsinnofsodinconatisnowrognindasaseriousproblemwithlargeere-nondconSequenas.Thecormsionproducofondatthesurfaeeofrenfontin-dutaltenSioninthernaterial,resultinginfraCtureandspillingoftheconcretefromtherenfoot(Madrinaldetal.,l99l).Asaasult,theconCretestructure'sIneCanhalstwthisgreatiytalued.0wingtothephyShaldfultyofconduCtingforchdricalexperiInentsinconare,muCoftheworkintheaasofndanisticdCtendnationsforcormsionofstalincon-~wereconduedinalkalinesolution,generallyofporewatCr(Romirz…     

Study on rust layers on steel in different marine corrosion zone

IrmODUCnONTheMossbaureffect(ME)isalsoknOWnasrecoil-thenuclearresonaneabsorp-hon.MossbaursPeCboscoPy(MS)haspIDvedtobeaveryuSefultecheqUeforstudytngcormsionPimessesandcedon-cts.TheInainadvantagsofMSincormsionre-enhare:(l)thenon-deStrutivechateroftheteCboqUe;(2)possibilltyforquali-tativeandqUanitativephaanalsis;(3)uSehassinidenificationofPOOrlycrystal-lizedoramorphouscormsionpnhats.WththedeVfoPmntofInarineresomees,InansteelconstrUctionswerebulltatsea'MSwasusedforanalfongcormsion~t…     

Evaluation and classification of seawater corrosiveness by environmental factors

According to the data of main environmental factors and the depth of localized corrosion of carbon steel and low alloy steels in China seas, combined with the result of grey interrelation analysis, double-factor method was proposed to evaluate and classify seawater corrosiveness. According to the temperature of seawater and the biologically adhesive area on steels, the corrosiveness of seawater from low to high level is classified into five levels （C l-C5）, which was identified by the data of corrosion depth of carbon steel immersed in water for one year.     

Research on protection of steel piles of Baoshan general steel factory wharf by using DZ and DZ-2 tapes

Steel piles at the tidal zone can be seriously corroded. Common protective methods such as painting or coating with rubber or other protective materials, etc. cannot provide full protection when used as supplementary protection because these traditional methods require strict pretreatment and sealing of the metallic surface from the corrosive mediums, and time for the protective coatings to solidify. This is very difficult under the severe action of waves and surges on the sea. With our oil-soluble DZ-2 tape, protection efficiency for hanging steel plates at the tidal and splash zones reaches to 82–99%. The protection efficiency of water soluble DZ tape at the tidal zone reaches to 92.9%. The DZ and DZ-2 tapes can rapidly reduce the original corrosion velocity to ten percent and one percent respectively as fully proved by the 500 hour rapid corrosion testing with indoor salt fog and by the relevant electrochemical parameters of instantaneous corrosion velocity, etc. DZ tape absorbs much OH⁻ to cause a pH rise. A synergistic protective effect is gained when DZ tape is used together with cathodic protection of steel piles at the tidal zone. The working principle of DZ tape is different from that of DZ-2 tape even though they are composed of the same chemical materials. The latter provides protection because of the close affinity between metal and its carboxyl group shields the active centre at the metal surface to reduce the activation energy of metal. The carbon chain forms a covering oil film of netted structure. Dai Tao, Dai Wei and Xia Caiyuan et al. participated in the research and made useful contribution. Contribution No. 1656 from the Institute of Oceanology, Academia Sinica.     

Effects of anaerobe in sea bottom sediment on the corrosion of carbon steel

hacteria(SRB)canbeashighastenhmesthainseahattOInsetlimentwithouSRB.Theex-perimentsinsimulatingseahattmsedimentswithdifferentconcenhations0fcultUredSRBsh0WedthatheelecthehendcalpoariZaionbehavi0ur0fsteelinseahatt()msedimentwithandwithouSRBwerefferent.SRBalteredthepoarizationbehavi0ur0fsteelsignificanilbyaciopingtheenvironments0thaaP-parenthydrogendepoallzationoccurredandacceleratedthec0meionofsteel.Keywofor:anaerohe,seab0ttomsediment,steelINTRODUCTIONAnaerobesaregenerallypresentins…     

Study on kinetics of cathodic reduction of dissolved oxygen in 3.5% sodium chloride solution

Electrochemical reduction of dissolved oxygen in seawater on metals is of great importance for corrosion studies. The present paper studied cathodic reduction of dissolved oxygen on Q235 carbon steel in 3. 5% sodium chloride(NaCl)solutions by cyclic voltammetry(CV), electrochemical impedance spectroscopy(EIS), rotating disk electrode(RDE)and rotating ring-disk electrode(RRDE). The cyclic voltammetric results demonstrated the cathodic process on Q235 carbon steel in O2-saturated 3. 5% NaCl solution contains three reactions:dissolved oxygen reduction, iron oxides reduction and hydrogen evolution. The peak potential of oxygen reduction reaction(ORR)is-0. 85 V vs Ag/AgCl, 3 molL-1 KCl. The E1S results indicated that the ORR occurring on Q235 carbon steel is a 4-electron process and that no finite diffusion is caused by the intermediate of H2O2 produced by ORR. The RDE and RRDE voltammograms confirmed the EIS results and it was found that the number of transferred electrons for ORR was nearly 4, I. E. , dissolved oxygen reduced to water.     

Sol－gel法制取Al_2O_3系陶瓷涂层的组织与性能

用多种分析手段分析了Ｓｏｌ－ｇｅｌ法制取的Ａｌ２Ｏ３系陶瓷涂层在烧结过程中的组织变化以及烧结后涂层的成分和组织结构；对涂层的高温抗氧化性、耐蚀性、耐磨性以及涂层与金属基体的结合力进行了测试，结果表明，Ｓｏｌ－ｇｅｌ法制取的Ａｌ２Ｏ３系陶瓷涂层由氧化物晶体、过渡相和玻璃体混合而成，涂层与基体之间有很好的结合力，金属基体的抗氧性、耐蚀性、耐磨性能有明显提高．     

THE CORROSIVE EFFECT OF BARNACLES ON LOW ALLOY STEELS

The effect of barnacles on corrosion of low alloy (16Mn) steel was studied by immersing steel panels in seawater at Zhonggang.Qingdao, for 41 months. It was found that the secondary attachment on this kind of steel by barnacles had less effect on its corrosion while the primary attachment had a greater effect; that different seasons have different effects on the form and extent of local corrosion in this steel, and that primarily attached barnacles cause more serious local corrosion in high breeding seasons when there are more attachments.     

Model test of the stability degradation of a prestressed anchored rock slope system in a corrosive environment

The long-term stability of a prestressed anchored slope might be influenced by the durability of the anchorage structure. To understand long-term stability of anchored rock slopes, the research presented herein evaluated the performance evolution of a prestressed anchored bedding slope system in a corrosive environment by model test. The corrosion process in a prestressed anchor bar was monitored in terms of its open-circuit potential(OCP), corrosion current density(CCD), and electrochemical impedance spectroscopy(EIS). The stability of the prestressed anchored slope was evaluated by monitoring changes in anchorage force and displacements. The experimental results show that prestress and oxygen could reduce the corrosion resistance of the anchor bar, and anchor bars in a chloride-rich environment are very susceptible to corrosion. Prestressed tendons in a corrosive environment suffer a loss of anchorage force, the prestress decreases rapidly after locking, and the rate thereof decreases until stabilising; in the later stage, corrosion leads to the reduction of the cross-sectional area of the steel bar which may cause the reduction in anchorage force again. Anchorage force controls the deformation and stability of the anchored slope, the prestress loss caused by later corrosion may lead to an increased rate of displacement and stability degradation of the prestressed anchored rock slope.     

Corrosion performance of zinc coated steel in seawater environment

Considering the continuous exploitation of marine resources,it is very important to study the anticorrosion performance and durability of zinc coated streel(ZCS) because its increasing use as reinforcements in seawater.Tafel polarization curves and linear polarization curves combined with electrochemical impedance spectroscopy(EIS) were employed to evaluate the corrosion performance of ZCS at Qingdao test station during long-term immersion in seawater.The results indicated that the corrosion rate of the ZCS increased obviously with immersion time in seawater.The corrosion products that formed on the zinc coated steel were loose and porous,and were mainly composed of Zn_5(OH)_8Cl_2,Zns(OH)_6(CO_3)_2,and ZnO.Pitting corrosion occurred on the steel surface in neutral seawater,and the rate of ZCS corrosion decreased with increasing pH.     

EFFECT OF SULPHATE-REDUCING BACTERIA ON ELECTRO-CHEMICAL CORROSION BEHAVIOR OF 16Mn STEEL IN SEA MUD

ＩＮＴＲＯＤＵＣＴＩＯＮＩｔｗａｓｇｅｎｅｒａｌｌｙｃｏｎｓｉｄｅｒｅｄｐｒｅｖｉｏｕｓｌｙｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｏｆｓｔｅｅｌｉｎｓｅａｍｕｄｗａｓｎｏｔｓｅｒｉｏｕｓ.Ｈｏｗｅｖｅｒ,ｉｔｗａｓｌａｔｅｒｆｏｕｎｄｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｒａｔｅｏｆｓｔｅｅｌｉｎｓｏｍｅｓｅａｍｕｄｗａｓｈｉｇｈｅｒｔｈａｎｔｈａｔｉｎｓｅａｗａｔｅｒ(Ｋｉｎｇ,1980;Ｓｅｈｍｉｄｅ,1982;Ｇｕｏｅｔａｌ.,1997;Ｈｏｕ,1998).Ｔｈｅｒｅａｒｅｓｏｍｅｒｅｐｏｒｔｓｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｒ…     

STUDY ON THE CORROSION PEAK OF CARBON STEEL IN MARINE SPLASH ZONE

lNTRODUCTI0NSincetheoonceptofrnarinesplashzone(MSZ)wasfirstproposedbyHumble,rnanyresearchesprovedthatthecorrosionofsteelinthesplashzoneisthemostseriousinthemarineenvironninetandthatthisMSZcorrosionhasapeak(Zhu,l995).Howevertheenvironmentalfactorscatisingthecorrosionpeakwasnotkn0wnthen(Niat0,l975,Atsushi,l994)andtherangeoftheMSZwasnotyetdeariydefinedopzkaki,l985).ThispaperexplainsthemaincauseofthecormsionpeakanddefinestheexaCtrangeoftheMSZinsomeofChina'sharbours.MATERIALSANDMET…     

一种新型光纤光栅锈蚀传感器及其对混凝土结构钢筋锈蚀监测实验研究

设计一种新型光纤光栅锈蚀传感器,主要由锈蚀体、不锈钢体和2段串联的光纤布拉格光栅（FBG）组成。缠绕于锈蚀体表面的FBG监测钢筋的锈胀应变,缠绕于不锈钢体表面的FBG用作温度补偿器,消除温度变化对锈胀应变监测的影响。此外,设计电化学加速腐蚀实验,探究该传感器在不同强度等级混凝土中的工作性能。结果表明,该传感器监测质量腐蚀率的灵敏度为0.02%,监测范围大于1%,可实时监测混凝土中钢筋的锈蚀过程及特征,为预警钢筋锈蚀引起的钢筋混凝土结构耐久性损失提供阈值,在结构健康监测领域具有较大的应用价值。     

三元复合驱采油污水阻垢缓蚀剂电化学分析

研制适用于三元复合驱采油污水工况条件下的MPM固体缓蚀阻垢剂,分析三元复合驱采油污水中MPM的电化学特性.结果表明:随着温度增加,20#钢在采油污水的腐蚀速率呈增加趋势,极化曲线显示钝化区表面材料在表面高温下处于钝化状态,产生的钝化膜能够降低腐蚀速度.在阻垢缓蚀剂质量浓度相同的情况下,不同温度的电化学阻抗谱在高频区出现容抗弧,显示优良的缓蚀性能.不同质量浓度MPM极化曲线表明,缓蚀率随MPM质量浓度的增加而增大,MPM极值质量浓度为80mg/L.污水体系中的Ca2+、Cl-对缓蚀率产生影响.MPM适用于高质量浓度Ca2+的三元复合驱采油污水处理.     

苯扎溴铵复方消毒液在水产品加工厂的应用

用苯扎溴铵复方消毒液对大肠杆菌、金黄色葡萄球菌和枯草杆菌黑色变种芽胞进行定量杀菌、现场模拟杀菌及金属腐蚀试验。结果表明 :含量为 0 .2、0 .4 g/L的苯扎溴铵复方消毒液分别对大肠杆菌和金黄色葡萄球菌在消毒时间 1min以上有完全杀菌效果 ;含量为 0 5g/L的苯扎溴铵复方消毒液对枯草杆菌黑色变种芽胞在消毒 15min以上有完全杀菌效果 ;含量为 0 .2g /L的苯扎溴铵复方消毒液对水产品加工厂中生产人员的双手、手套和装虾的塑料筛上的大肠杆菌在消毒1min以上达到完全杀菌效果 ;苯扎溴铵复方消毒液对不锈钢、碳钢和铜无腐蚀 ,对铝只有轻微的腐蚀。     

Marine antifouling behavior of the surfaces modified by dopamine and antibacterial peptide

Marine biofouling causes serious harms to surfaces of marine devices in transportation, aquaculture, and offshore construction. Traditional antifouling methods pollute the environment. A novel and green antifouling strategy was developed to prevent effectively the adhesion of bacteria and microalgae. An antifouling surface was fabricated via coating Turgencin B_Mox2 (TB) onto dopamine-modified 304 stainless steel (304 SS). The surface physical and chemical properties before and after modification were characterized by Fourier transform infrared spectrometer (FTIR), X-ray photoelectron spectrometer (XPS), contact angle measurement (CA), 3D optical profilometer, ellipsometer, and atomic force microscope (AFM). Antimicrobial peptide was coated onto the surface of 304 SS successfully, and the surface morphology and wettability of the modified sample were modified. Moreover, cytocompatibility of the peptide was evaluated by co-culture of peptide and cells, indicating promising cell biocompatibility at the modified sample surface. At last, antifouling performance and electrochemical corrosion were tested. Results show that the adhesion rates of Vibrio natriegens and Phaeodactylum tricornutum on the antifouling surface were reduced by 99.85% and 67.93%, respectively from those of untreated samples. Therefore, the modified samples retained superior corrosion resistance. The study provide a simply and green way against biofouling on ship hulls and marine equipment.