The formation of todorokite and birnessite in sea water pumped from under ground

Manganese oxides precipitated from aerated well sea water at the Marine Science Museum, Tokai University, have been analyzed chemically and mineralogically. The $\text{O}\text{Mn}$ ratios are lower in todorokite than in birnessite but these minerals have similar contents of minor transition metals, which can be taken up additionally from sea water after the precipitation of Mn oxides. On the basis of these results, the genesis of Mn minerals is discussed in relation to marine Mn nodules.     

Oxidation of As^Ⅲ by Several Manganese Oxide Minerals in Absence and Presence of Goethite

Oxidation of As^Ⅲ by three types of manganese oxide minerals affected by goethite was investigated by chemical analysis, equilibrium redox, X-ray diffraction （XRD） and transmission electron microscopy （TEM）. Three synthesized Mn oxide minerals of different types, birnessite, todorokite, and hausmannite, could actively oxidize As^Ⅲ to Asv, and greatly varied in their oxidation ability. Layer structured birnessite exhibited the highest capacity of As^Ⅲ oxidation, followed by the tunnel structured todorokite. Lower oxide hansmannite possessed much low capacity of As^Ⅲ oxidation, and released more Mn^2＋ than birnessite and todorokite during the oxidation. The maximum amount of Asv produced during the oxidation of As^Ⅲ by Mn oxide minerals was in the order： birnessite （480.4 mmol/kg） 〉 todorokite （279.6 mmol/kg） 〉 hansmannite （117.9 mmol/kg）. The oxidation capacity of the Mn oxide minerals was found to be relative to the composition, crystallinity, and surface properties. In the presence of goethite oxidation of As^Ⅲ by Mn oxide minerals increased, with maximum amounts of Asv being 651.0 mmol/kg for birnessite, 332.3 mmol/kg for todorokite and 159.4 mmol/kg for hansmannite. Goethite promoted As^Ⅲ oxidation on the surface of Mn oxide minerals through adsorption of the Asv produced, incurring the decrease of Asv concentration in solutions. Thus, the combined effects of the oxidation （by Mn oxide minerals）-adsorption （by goethite） lead to rapid oxidation and immobilization of As in soils and sediments and alleviation of the As^Ⅲ toxicity in the environments.     

Improved methods for selective dissolution of Mn oxides: applications for studying trace element associations

The association of rare earth and other trace elements with Fe and Mn oxides was studied in Fe-Mn-nodules from a lateritic soil from Serra do Navio (Northern Brazil). Two improved methods of selective dissolution by hydroxylamine hydrochloride and acidified hydrogen peroxide along with a classical Na–citrate–bicarbonate–dithionite method were used. The two former reagents were used to dissolve Mn oxides without significant dissolution of Fe oxides, and the latter reagent was used to dissolve both Mn and Fe oxides. Soil nodules and matrix were separated by hand. Inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry after fusion with lithium metaborate, and X-ray diffraction were used to determine the elemental and mineralogical composition of the nodules and soil matrix. The latter was composed of kaolinite, gibbsite, goethite, hematite, and quartz. In the nodules, lithiophorite LiAl₂(Mn^IV₂Mn^III)O₆(OH)₆ was detected in addition to the above-mentioned minerals. The presence of hollandite (BaMn₈O₁₆) and/or coronadite (PbMn₈O₁₆) in the nodules is also possible. In comparison to the matrix, the nodules were enriched in Mn, Fe, K, and P, and relatively poor in Si, Al, and Ti. The nodules were also enriched in all trace elements determined. Phosphorus, As and Cr were associated mainly with Fe oxides; Cu, Ni, and V were associated with both Fe and Mn oxides; and Ba, Co, and Pb were associated mainly with Mn oxides. Distribution of rare earth elements indicated a strong positive Ce-anomaly in the nodules, compared to the absence of any anomaly in the matrix. Some of Ce was associated with Mn oxides. The improved methods achieved almost complete release of Mn from the sample without decreasing the selectivity of dissolution, i.e., without dissolving significant amounts of Fe oxides and other minerals, and provided reliable information on associations of trace elements with Mn oxides. These methods are thus proposed to be included in sequential extraction schemes for fractionation of trace elements in soils and sediments.     

Estimation des Energies Standard de Gibbs de Certains Bioxydes de Manganèse — Application aux Formations Marines

Résumé Les principaux oxydes de manganèse des nodules océaniques: todorokite et birnessite, sont envisagés comme des solutions simples de MnO₂ et MnO. Les propriétés thermodynamiques de celles-ci sont utilisées pour calculer les énergies standard de Gibbs G° de ces oxydes et les constantes d'équilibre de leur réaction de précipitation par oxydation du Mn²⁺ de l'eau de mer. L'interprétation des diagrammes d'équilibre conduit à penser que la formation d'un de ces oxydes sera déterminé par deux facteurs: l'activité du Mn²⁺ et le pE. Les variations des teneurs en Mn²⁺ seront la conséquence d'un apport tel que source hydrothermale ou flux diagénétique par exemple. Les variations de pE seront dues à une réaction d'équilibration entre les différents oxydes; ces transformations à l'état solide agissent comme un tampon pE.

---

The main manganese oxides of oceanic nodules: todorokite and birnessite, are considered as regular solutions of MnO₂ and MnO. Thermodynamic properties of regular solutions are used for the calculation of Gibbs energies G° of these oxides and of their equilibrium constants of precipitation by oxidation from Mn²⁺ of sea water. From equilibrium diagram representation it is possible to distinguish the different manganese oxide forms, when looking at Mn²⁺ activity and pE: Mn²⁺ variations in sea water originates mainly from hydrothermal springs and diagenetic fluxes, while pE variations reflects the transient states during oxide rehandling. This solid state transformations defines a pE-buffer.

     

Composition of manganese nodules and manganese carbonates from Loch Fyne,Scotland

Manganese nodules and manganese carbonate concretions occur in the upper 10–15 cm of the Recent sediments of Loch Fyne, Argyllshire in water depths of 180–200 m. The nodules are spherical, a few mm to 3 cm in diameter, and consist of a black, Mn-rich core and a thin, red, Fe-rich rim. The carbonate occurs as irregular concretions, 0.5–8 cm in size, and as a cement in irregular nodule and shell fragment aggregates. It partially replaces some nodule material and clastic silicate inclusions, but does not affect aragonitic and calcitic shell fragments.The nodules are approximately 75% pure oxides and contain 30% Mn and 4% Fe. In the cores, the principal mineral phase is todorokite, with a Mn/Fe ratio of 17. The rim consists of X-ray amorphous Fe and Mn oxides with a Mn/Fe ratio of 0.66. The cores are enriched, relative to Al, in K, Ba, Co, Mo, Ni and Sr while the rims contain more P, Ti, As, Pb, Y and Zn.The manganese carbonate has the composition (Mn_47.7 Ca_45.1 Mg_7.2) CO₃. Apart from Cu, all minor elements are excluded from significant substitution in the carbonate lattice.Manganese nodules and carbonates form diagenetically within the Recent sediments of Loch Fyne. This accounts for the high Mn/Fe ratios in the oxide phases and the abundance of manganese carbonate concretions. Mn concentrations in the interstitial waters of sediment cores are high (ca. 10 ppm) as also, by inference, are the dissolved carbonate concentrations.     

Geochemistry of ferromanganese nodules from DOMES site a,Northern Equatorial Pacific: Multiple diagenetic metal sources in the deep sea

The major and minor element composition of ferromanganese nodules from DOMES Site A has been determined by X-ray fluorescence methods. Three phases appear to control the bulk compositions: Mn and Fe oxyhydroxides and aluminosilicates. Relatively wide compositional variations are evident throughout the area. Nodules with high Mn/Fe ratios, high Cu, Mg, Mo, Ni and Zn concentrations and high todorokite/δ-MnO₂ ratios have granular surface textures and are confined to an east-west trending depression with thin Quaternary sediment cover. Nodules with low Mn/Fe ratios, high concentrations of As, Ca, Ce, Co, La, P, Sr, Ti, V, Y and Zr and low todorokite/δ-MnO₂ ratios have smooth surfaces and are confined to shallower areas with relatively thick Quaternary sediment to the north and south of the depression.All nodules in the area have compositions which are influenced by diagenesis, but those with the most marked diagenetic signature (high Mn/Fe and Cu/Ni ratios, low Ce/La ratios and more todorokite) are found in areas of very slow or non-existent sedimentation; many of these nodules are actually in contact with outcropping Tertiary sediment. This paradox may be resolved by postulating, by analogy with some shallow-water occurrences, that the nodules accrete from bottom waters which have enhanced particulate and dissolved metal contents derived from diagenetic reaction in areas remote from the site of nodule formation. The metals are supplied in a bottom flow (probably Antarctic Bottom Water) which also erodes, or prevents modern sedimentation in, the depression. Nodules on the flanks of the depression are not evidently affected by this flow and derive at least pan of their constituent metals from diagenetic reaction in the underlying Quaternary sediment.Apparently, abyssal diagenetic nodules can have an immediate and a remote diagenetic metal source. Metal fluxes derived from pore water dissolved metal gradients may not be relevant to particular accreting nodules if a significant fraction of their metals is derived from outside the area in which they form.     

The uptake of cobalt into ferromanganese nodules,soils, and synthetic manganese (IV) oxides

Strong enrichments of cobalt occur in marine manganese nodules, soils, wads, and natural and synthetic minerals such as hollandite, cryptomelane, psilomelane, lithiophorite, birnessite, and δ-MnO₂. Previously, it was suggested that Co³⁺ ions in these minerals replace either Mn³⁺ or substitute for Fe³⁺ in incipient goethite epitaxially intergrown with δ-MnO₂. Neither of these interpretations is now considered to be satisfactory on account of the large discrepancy of ionic radius between octahedrally coordinated low-spin Co³⁺ and high-spin Mn³⁺ or Fe³⁺ in oxide structures. The close agreement between the ionic radii of Co³⁺ and Mn⁴⁺ suggests that some cobalt substitutes for Mn⁴⁺ ions in edge-shared [MnO₆] octahedra in many manganese(IV) oxide mineral structures. It is proposed that hydrated cations, including Co²⁺ ions, are initially adsorbed on to the surfaces of certain Mn(IV) oxides in the vicinity of essential vacancies found in the chains or sheets of edge-shared [MnO₆] octahedra. Subsequently, fixation of cobalt takes place as a result of oxidation of adsorbed Co²⁺ ions by Mn⁴⁺ and replacement of the displaced manganese by low-spin Co³⁺ ions in the [MnO₆] octahedra or vacancies.     

Influence of extractable soil manganese on oxidation capacity of different soils in Korea

We examined the relationship between soil oxidation capacity and extractable soil manganese, iron oxides, and other soil properties. The Korean soils examined in this study exhibited low to medium Cr oxidation capacities, oxidizing 0.00–0.47 mmol/kg, except for TG-4 soils, which had the highest capacity for oxidizing added Cr(III) [>1.01 mmol/kg of oxidized Cr(VI)]. TG and US soils, with high Mn contents, had relatively high oxidation capacities. The Mn amounts extracted by dithionite-citrate-bicarbonate (DCB) (Mn^d), NH₂OH·HCl (Mn^h), and hydroquinone (Mn^r) were generally very similar, except for the YS1 soils, and were well correlated. Only small proportions of either total Mn or DCB-extractable Mn were extracted by NH₂OH·HCl and hydroquinone in the YS1 soils, suggesting inclusion of NH₂OH·HCl and hydroquinone-resistant Mn oxides, because these extractants are weaker reductants than DCB. No Cr oxidation test results were closely related to total Mn concentrations, but Mn^d, Mn^h, and Mn^r showed a relatively high correlation with the Cr tests (r = 0.655–0.851; P < 0.01). The concentrations of Mn^d and Mn^h were better correlated with the Cr oxidation tests than was the Mn^r concentration, suggesting that the oxidation capacity of our soil samples can be better explained by Mn^d and Mn^h than by Mn^r. The first component in principal components analysis indicated that extractable soil Mn was a main factor controlling net Cr oxidation in the soils. Total soil Mn, Fe oxides, and the clay fraction are crucial for predicting the mobility of pollutants and heavy metals in soils. The second principal component indicated that the presence of Fe oxides in soils had a significant relationship with the clay fraction and total Mn oxide, and was also related to heavy-metal concentrations (Zn, Cd, and Cu, but not Pb).     

Oxidation state of marine manganese nodules

Analyses of the bulk oxidation state of marine manganese nodules indicates that more than 98% of the Mn in deep ocean nodules is present as Mn(IV). The samples were collected from three quite different areas: the hemipelagic environment of the Guatemala Basin, the pelagic area of the North Pacific, and seamounts in the central Pacific. Results of the study suggest that todorokite in marine nodules is fully oxidized and has the following stoichiometry: (K, Na, Ca, Ba)_.33(Mg, Cu, Ni)_.76Mn₅O₂₂(H₂O)_3.2.     

MnO2-UV联用光化学降解苯酚废水的初步研究

探讨了人工合成的高价锰氧化物与紫外光(UV)联用时降解苯酚废水的特性。结果表明,氧化锰矿物在无UV时对苯酚的降解能力差异大,1 g/L的氧化锰4 h对200 mg/L苯酚废水的降解率和COD去除率分别为:锰钾矿97.51%、酸性水钠锰矿89.07%、碱性水钠锰矿11.36%、钙锰矿9.67%;锰钾矿87.79%、酸性水钠锰矿53.11%、碱性水钠锰矿6.42%、钙锰矿1.43%。UV光照下,氧化锰矿物对苯酚的降解率有不同程度的提高,且表现出显著的表面光催化性质,增加了苯酚的深度降解,COD去除率显著提高。UV下氧化锰4 h对苯酚的降解率分别为:锰钾矿99.48%、酸性水钠锰矿91.86%、碱性水钠锰矿40.15%、钙锰矿35.95%);COD的去除率分别为:锰钾矿98.11%、酸性水钠锰矿68.45%、钙锰矿27.57%、碱性水钠锰矿24.27%。MnO2-UV联用时降解苯酚可能包括两种主要作用机制:氧化锰矿物的直接化学氧化降解和UV下MnO2的表面光催化降解。     

模拟表生环境水钠锰矿亚结构转化及钙锰矿的形成

水钠锰矿是土壤与沉积物中最为常见的氧化锰矿物, 依据其MnO₆层对称特点分为六方和三斜两种亚结构类型.六方水钠锰矿在表生环境中可通过Mn2+的化学或生物氧化形成, 而环境中三斜水钠锰矿的形成及进一步转化为钙锰矿的途径尚不清楚.以两种六方水钠锰矿(酸性水钠锰矿和水羟锰矿)为前驱物, 采用X射线吸收光谱(EXAFS)、X射线衍射(XRD)、电镜(FESEM/TEM)及化学组成分析等技术方法模拟表生环境研究了水钠锰矿从六方向三斜的亚结构转化及生成钙锰矿的化学条件和矿物学机制.结果表明, 适当Mn(Ⅱ)浓度和弱碱性条件(pH≥8)可使六方水钠锰矿逐渐转化为三斜水钠锰矿, 继而经Mg2+交换、常压回流得到了长纤维状的钙锰矿, 其晶体生长以溶解-结晶为主.Mn(Ⅱ)与六方水钠锰矿MnO₆八面体层内的Mn(Ⅳ)反应生成Mn(Ⅲ)并填充层内空位, 使水钠锰矿对称型由六方向三斜转变.与酸性水钠锰矿相比, 水羟锰矿结晶弱、层状堆积混乱度高, 与Mn(Ⅱ)反应迅速, 层结构向三斜水钠锰矿转化快.pH升高, 促进六方水钠锰矿对Mn(Ⅱ)的吸附和Mn(Ⅱ)与Mn(Ⅳ)间的反应, 六方水钠锰矿转化为三斜水钠锰矿的速率加快."六方水钠锰矿→三斜水钠锰矿"可能是环境中三斜水钠锰矿的重要来源, 及进一步形成钙锰矿的重要化学生成机制.      

On the distribution of iron and manganese at the sediment/water interface: thermodynamic versus kinetic control

Iron and manganese solubility at the sediment/water interface has been studied at a water depth of 20 m in Kiel Bight, Western Baltic. By means of an in situ bell jar system enclosing 3.14 m² sediment surface and 2094 l water a complete redox turn-over in the bottom water was simulated in an experiment lasting 99 days. The concentration of dissolved Fe in the bell jar water never exceeded 0.041 μmol · dm^?3during the first 50 days of the experiment and then rose abruptly as the Eh fell from +600 to ?200 mV. The concentration of dissolved Fe under oxic and anoxic conditions seems to be limited by equilibria with solid Fe-phases (hydroxides and amorphous sulphide, respectively). In contrast to Fe, manganese was released continuously from the bottom during the first 50 days of the experiment leading to exponentially increasing manganese concentrations in the bell jar water. During this time dissolved O₂ had become ready depleted and pH had dropped from 8.3 to 7.5. Contrary to iron, manganese being solubilized in reduced sediment layers can penetrate oxic strata in metastable form due to slow oxidation kinetics; when the redoxcline moves upwards Mn²⁺ is enriched in bottom waters. The maximum concentration of dissolved Mn under anoxic conditions is controlled by a solid phase with solubility properties similar to MnCO₃ (rhodochrosite). Bottom water enrichment in dissolved Mn²⁺ could be traced to originate from excess solid manganese within the top 3 cm of the sediment.     

Importance of different types of marine particles for the scavenging of heavy metals in the deep-sea bottom water

In experiments of 7 days duration using voltammetric and radiotracer measurement techniques, the role of different particle types in the sorption of dissolved metal species in a disturbed deep-sea bottom seawater system were investigated. Resuspension of oxic to suboxic surface sediment into the bottom water in the deep sea (either by natural events or industrial activities like Mn nodule mining) has been shown to be followed quickly by scavenging of dissolved heavy metals, e.g. released from interstitial water, on the resuspended particles. Compared to other deep-sea particles (like clay minerals, calcite and apatite), Mn and Fe oxides and oxyhydroxides were found to be by far the most important phases in scavenging many dissolved heavy metals. Only Pb was sorbed strongly on all particles used, with highest affinity to carbonate fluorapatite. Caesium⁺ was significantly scavenged only by clay minerals like illite. The sorption experiments support a simple electrostatic model: Hydrated cations and labile cationic chloro-complexes in seawater like Mn²⁺, MnCl⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ba²⁺, and PbCl⁺, are preferentially adsorbed or ion-exchanged on the negatively charged surfaces of Mn oxides. In contrast, oxyanions and neutrally or negatively charged complexes like HVO₄²⁻, MoO₄²⁻, HAsO₄²⁻, UO₂(CO₃)₂²⁻, and PbCO₃⁰ associate with neutral to slightly positive amphoteric Fe oxyhydroxide particles. Metals forming strong chloro-complexes in seawater like Cd (CdCl₂⁰), are less readily sorbed by oxides than others. A comparison of the results of voltammetric and radiotracer techniques revealed that after fast sorption within the first hour, isotopic exchange dominated reactions on MnO₂-rich particles in the following days. This was especially pronounced for Mn and Co which are bound to the Mn oxide surface via a redox transformation.     

On the model of Mn,Fe, Ni,Co ore formation in recent basins: Experiments with the synthesis of Me-hydroxide phases on Mn3O4

Experiments on the sorption of dissolved Ni, Co, Mn, Fe from seawater by Mn₃O₄ reveal a sequence of reactions taking place: Ion exchange, hydrolysis, then autocatalytic oxidation and layer formation on the interface. The composition of the new compounds depends on the kinetics of i) sorption, and ii) interface oxidation. The highest oxidized Me ions accumulate at low sorption rates, i. e. when sorption does not inhibit interface oxidation: 60% Mn⁴⁺, 30% Ni³⁺ & 30% Co³⁺ are a representative example for that layer type. Iron is present in this layer as amorphous FeOOH·xH₂O according to Mössbauer spectra. Specific for the Me sorption by Mn₃O₄ is the interaction of Ni & Co with Mn²⁺ and Mn³⁺ of the sorbent lattice. Mn is found in the solute phase equivalent to 16, 14% of the adsorbed Co or 17, 96% of the adsorbed Ni. These results confirm the earlier presented model on the transition metal accumulation in recent basins as taking place in distinct stages with interface autocatalysis for the Me oxidation playing the main role.     

Characterization of manganese oxide precipitates from Appalachian coal mine drainage treatment systems

The removal of Mn(II) from coal mine drainage (CMD) by chemical addition/active treatment can significantly increase treatment costs. Passive treatment for Mn removal involves promotion of biological oxidative precipitation of manganese oxides (MnO_x). Manganese(II) removal was studied in three passive treatment systems in western Pennsylvania that differed based on their influent Mn(II) concentrations (20–150 mg/L), system construction (±inoculation with patented Mn(II)-oxidizing bacteria), and bed materials (limestone vs. sandstone). Manganese(II) removal occurred at pH values as low as 5.0 and temperatures as low as 2 °C, but was enhanced at circumneutral pH and warmer temperatures. Trace metals such as Zn, Ni and Co were removed effectively, in most cases preferentially, into the MnO_x precipitates. Based on synchrotron radiation X-ray diffraction and Mn K-edge extended X-ray absorption fine structure spectroscopy, the predominant Mn oxides at all sites were poorly crystalline hexagonal birnessite, triclinic birnessite and todorokite. The surface morphology of the MnO_x precipitates from all sites was coarse and “sponge-like” composed of nm-sized lathes and thin sheets. Based on scanning electron microscopy (SEM), MnO_x precipitates were found in close proximity to both prokaryotic and eukaryotic organisms. The greatest removal efficiency of Mn(II) occurred at the one site with a higher pH in the bed and a higher influent total organic C (TOC) concentration (provided by an upstream wetland). Biological oxidation of Mn(II) driven by heterotrophic activity was most likely the predominant Mn removal mechanism in these systems. Influent water chemistry and Mn(II) oxidation kinetics affected the relative distribution of MnO_x mineral assemblages in CMD treatment systems.     

Découverte de microstructures de nodules polymétalliques dans les minéralisations manganésifères métamorphiques de Falotta et de Parsettens (Grisons-Suisse)

Résumé Les minéralisations manganésifères de Falotta et de Parsettens (Grisons-Suisse) se manifestent dans les radiolarites du Jurassique supérieur et elles sont déposées sur les ophiolites du domaine pennique. Ce minerai présente des microstructures botryoïdales caractéristiques des nodules polymétalliques. Les phases minéralogiques des nodules, sous l'effet du métamorphisme alpin, se transforment de façon progressive en braunite faiblement cristallisée (avec un important excès en SiO₂) à la périphérie des structures botryoïdales; par contre, vers la partie centrale de ces structures, la braunite est souvent largement cristallisée (sa teneur en SiO₂ est normale). De fines veinules constituées de termes intermédiaires de la série isostructurale de la cryptomélanehollandite recoupent la minéralisation de braunite et indiquent la deuxième étape dans l'évolution du minerai oxydé de Falotta et Parsettens. La troisième étape est représentée par la présence de la todorokite et de la birnessite due à l'oxydation des veinules postérieures de rhodonite. Ces deux oxydes n'ont aucun rapport direct avec la minéralisation primaire. L'existence de structures sédimentaires et volcaniques non déformées dans les écailles supérieures de la nappe de Platta permet d'expliquer la conservation de microstructures primaires de nodules polymétalliques dans le minerai de braunite. La variation de la teneur en Sr²⁺ observée lorsque l'on va de Falotta vers Parsettens, dans les termes intermédiaires de la série isostructurale de la cryptomélane-hollandite, ainsi que la déstabilisation de la braunite au voisinage des veinules, seraient liées à la différence du degré de déformation entre ces deux zones. Il est important de remarquer que les paramètres géochimiques Fe/Mn ou Mn/Co&+Cu&+Ni, couramment utilisés dans les travaux sur les nodules polymétalliques, sont inadéquats même dans les structures les mieux préservées.

---

The manganese ores of Falotta and Parsettens (Oberhalbstein, Grison Canton, Switzerland) are enclosed in Upper Jurassic radiolarites and overlay ophiolites of Upper Pennine nappes. These ores exhibit the botryoidal microstructures typical of manganese nodules. The mineralogical components of the outerpart of these nodules, which were affected by alpine metamorphism — were first transformed gradually into a poorly crystallized braunite (with a large excess of SiO₂). In contrast, the inner part of the nodules is composed of well-crystallized braunite with normal (10 wt%) contents of SiO₂. Narrow veinlets with intermediate members of the cryptomelane-hollandite isostructural series crosscut the braunite mineralization, and represent a secondary paragenesis. A third step is marked by the appearance of todorokite and birnessite through the oxidation of the rhodonite veinlets. This is apparently the first observation of primary botryoidal microstructures in these nodules — and the first observation of braunite microstructures in a metamorphic area. The occurrence of undeformed volcanic and sedimentary textures in the upper Platta thrust sheets explains the preservation of these primary structures in these nodules. Moreover, the increase in flattening and intensive schistosity from Falotta to Parsettens may be related with the enrichment of Sr²⁺ in the intermediate members of the cryptomelane-hollandite series and with the destabilization of the braunite along the veinlets. It must also be pointed out that the Fe/Mn or Mn/Co&+Cu&+Ni ratios, currently used in research on manganese nodules, seem to be inadequate even for the Falotta ore, in which the best-preserved primary microstructures exist. In Falotta as in Parsettens, todorokite and birnessite come from the late rhodonite veinlets and are not related with the primary ore.

     

Diversity of Mn oxides produced by Mn(II)-oxidizing fungi

Manganese (Mn) oxides are environmentally abundant, highly reactive mineral phases that mediate the biogeochemical cycling of nutrients, contaminants, carbon, and numerous other elements. Despite the belief that microorganisms (specifically bacteria and fungi) are responsible for the majority of Mn oxide formation in the environment, the impact of microbial species, physiology, and growth stage on Mn oxide formation is largely unresolved. Here, we couple microscopic and spectroscopic techniques to characterize the Mn oxides produced by four different species of Mn(II)-oxidizing Ascomycete fungi (Plectosphaerella cucumerina strain DS2psM2a2, Pyrenochaeta sp. DS3sAY3a, Stagonospora sp. SRC1lsM3a, and Acremonium strictum strain DS1bioAY4a) isolated from acid mine drainage treatment systems in central Pennsylvania. The site of Mn oxide formation varies greatly among the fungi, including deposition on hyphal surfaces, at the base of reproductive structures (e.g., fruiting bodies), and on envisaged extracellular polymers adjacent to the cell. The primary product of Mn(II) oxidation for all species growing under the same chemical and physical conditions is a nanoparticulate, poorly-crystalline hexagonal birnessite-like phase resembling synthetic δ-MnO₂. The phylogeny and growth conditions (planktonic versus surface-attached) of the fungi, however, impact the conversion of the initial phyllomanganate to more ordered phases, such as todorokite (A. strictum strain DS1bioAY4a) and triclinic birnessite (Stagonospora sp. SRC1lsM3a). Our findings reveal that the species of Mn(II)-oxidizing fungi impacts the size, morphology, and structure of Mn biooxides, which will likely translate to large differences in the reactivity of the Mn oxide phases.     

Coupled biotic-abiotic Mn(II) oxidation pathway mediates the formation and structural evolution of biogenic Mn oxides

Manganese (Mn) oxides are among the strongest oxidants and sorbents in the environment, impacting the transport and speciation of metals, cycling of carbon, and flow of electrons within soils and sediments. The oxidation of Mn(II) to Mn(III/IV) oxides has been primarily attributed to biological processes, due in part to the faster rates of bacterial Mn(II) oxidation compared to observed mineral-induced and other abiotic rates. Here we explore the reactivity of biogenic Mn oxides formed by a common marine bacterium (Roseobacter sp. AzwK-3b), which has been previously shown to oxidize Mn(II) via the production of extracellular superoxide. Oxidation of Mn(II) by superoxide results in the formation of highly reactive colloidal birnessite with hexagonal symmetry. The colloidal oxides induce the rapid oxidation of Mn(II), with dramatically accelerated rates in the presence of organics, presumably due to mineral surface-catalyzed organic radical generation. Mn(II) oxidation by the colloids is further accelerated in presence of both organics and light, implicating reactive oxygen species in aiding abiotic oxidation. Indeed, the enhancement of Mn(II) oxidation is negated when the colloids are reacted with Mn(II) in the presence of superoxide dismutase, an enzyme that scavenges the reactive oxygen species (ROS) superoxide. The reactivity of the colloidal phase is short-lived due to the rapid evolution of the birnessite from hexagonal to pseudo-orthogonal symmetry. The secondary particulate triclinic birnessite phase exhibits a distinct lack of Mn(II) oxidation and subsequent Mn oxide formation. Thus, the evolution of initial reactive hexagonal birnessite to non-reactive triclinic birnessite imposes the need for continuous production of new colloidal hexagonal particles for Mn(II) oxidation to be sustained, illustrating an intimate dependency of enzymatic and mineral-based reactions in Mn(II) oxidation. Further, the coupled enzymatic and mineral-induced pathways are linked such that enzymatic formation of Mn oxide is requisite for the mineral-induced pathway to occur. Here, we show that Mn(II) oxidation involves a complex network of abiotic and biotic processes, including enzymatically produced superoxide, mineral catalysis, organic reactions with mineral surfaces, and likely photo-production of ROS. The complexity of coupled reactions involved in Mn(II) oxidation here highlights the need for further investigations of microbially-mediated Mn oxide formation, including identifying the role of Mn oxide surfaces, organics, reactive oxygen species, and light in Mn(II) oxidation and Mn oxide phase evolution.     

Ion exchange properties of manganese and iron minerals in oceanic micronodules

The results of experimental studies of ion exchange properties of manganese and iron minerals in micronodules (MN) from diverse bioproductive zones of the World Ocean are considered. It was found that the sorption behavior of these minerals is similar to that of ore minerals from ferromanganese nodules (FMN) and low-temperature hydrothermal crusts. The exchange complex of minerals in the MN includes the major (Na⁺, K⁺, Ca²⁺, Mg²⁺, and Mn²⁺) and the subordinate (Ni²⁺, Cu²⁺, Co²⁺, Pb²⁺, and others) cations. Reactivity of theses cations increases from Pb²⁺ and Co²⁺ to Na⁺ and Ca²⁺. Exchange capacity of MN minerals increases from the alkali to heavy metal cations. Capacity of iron and manganese minerals in the oceanic MN increases in the following series: goethite < goethite + birnessite < todorokite + asbolane-buserite + birnessite < asbolane-buserite + birnessite < birnessite + asbolane-buserite < birnessite + vernadite Fe-vernadite + Mn-feroxyhyte. The data obtained supplement the available information on the ion exchange properties of oceanic ferromanganese sediments and refine the role of sorption processes in the redistribution of metal cations at the bottom (ooze) water-sediment interface during the MN formation and growth.