Active faulting in the western Pyrénées (France): Paleoseismic evidence for late Holocene ruptures

We have identified a 50-km-long active fault scarp, called herewith the Lourdes Fault, between the city of Lourdes and Arette village in the French Pyrénées. This region was affected by large and moderate earthquakes in 1660 (Io = VIII–IX, MSK 64,), in 1750 (Io = VIII, MSK 64) and in 1967 (M_d = 5.3, Io = VIII, MSK 64). Most earthquakes in this area are shallow and the few available focal mechanism solutions do not indicate a consistent pattern of active deformation. Field investigations in active tectonics indicate an East–West trending and up to 50-m-high fault scarp, in average, made of 3 contiguous linear fault sub-segments. To the north, the fault controls Quaternary basins and shows uplifted and tilted alluvial terraces. Deviated and abandoned stream channels of the southern block are likely due to the successive uplift of the northern block of the fault. Paleoseismic investigations coupled with geomorphic studies, georadar prospecting and trenching along the fault scarp illustrate the cumulative fault movements during the late Holocene. Trenches exhibit shear contacts with flexural slip faulting and thrust ruptures showing deformed alluvial units in buried channels. ¹⁴C dating of alluvial and colluvial units indicates a consistent age bracket from two different trenches and shows that the most recent fault movements occurred between 4221 BC and 2918 BC. Fault parameters and paleoseismic results imply that the Lourdes Fault and related sub-segments may produce a M_W 6.5 to 7.1 earthquake. Fault parameters imply that the Lourdes Fault segment corresponds to a major seismic source in the western Pyrénées that may generate earthquakes possibly larger than the 1660 historical event.     

Pleistocene–Holocene calcareous nannofossil biostratigraphy of core samples from The Northeastern Sea of Marmara, Fenerbahçe–Pendik, NW Turkey

Pseudoemiliana lacunosa, Gephyrocapsa oceanica and Emiliania huxleyi (Ionian) (Pleistocene–Holocene) calcareous nannoplankton zones were identified from 82 samples of 14 cores taken from 8 locations in the northeastern Sea of Marmara. The investigation indicates that the identified biozones have been alternated by tectonic activity in the 1, 5 and 6 core locations. The study area has been affected three times by tectonic activity during the Pleistocene–Holocene time interval. The first activity occured during the Early Pleistocene and the others during Holocene.     

Newly found Tunglo Active Fault System in the fold and thrust belt in northwestern Taiwan deduced from deformed terraces and its tectonic significance

We found active faults in the fold and thrust belt between Tunglo town and the Tachia River in northwestern Taiwan. The surface rupture occurred in 1999 and 1935 nearby the study area, but no historical surface rupture is recorded in this area, suggesting that the seismic energy has been accumulated during the recent time. Deformed fluvial terraces aid in understanding late Quaternary tectonics in this tectonically active area. This area contains newly identified faults that we group as the Tunglo Fault System, which formed after the area's oldest fluvial terrace and appears at least 16 km long in roughly N–S orientation. Its progressive deformations are all recorded in associated terraces developed during the middle to late Quaternary. In the north, the system consists of two subparallel active faults, the Tunglo Fault and Tunglo East Fault, striking N–S and facing each other from opposite sides of the northward flowing Hsihu River, whose course may be controlled by interactions of above-mentioned two active faults. The northern part of the Tunglo Fault, to the west of the river, is a reverse fault with upthrown side on the west; conversely the Tunglo East Fault, to the east, is also a reverse fault, but with upthrown side on the east. Both faults are marked by a flexural scarp or eastward tilting of fluvial terraces. Considering a Quaternary syncline lies subparallel to the east of this fault system, the Tunglo Fault might be originated as a bending moment fault and the Tunglo East Fault as a flexural slip fault. However, they have developed as obvious reverse faults, which have progressive deformation under E–W compressive stress field of Taiwan. Farther south, a west-facing high scarp, the Tunglo South Fault, strikes NNE–SSW, oblique to the region's E–W direction of compression. Probably due to the strain partitioning, the Tunglo South Fault generates en echelon, elongated ridges and swales to accommodate right-lateral strike–slip displacement. Other structures in the area include eastward-striking portion of the Sanyi Fault, which has no evidence for late Quaternary surface rupture on this fault; perhaps slip on this part of Sanyi Fault ceased when the Tunglo Fault System became active.     

The Yenice–Gönen active fault (NW Turkey): Active tectonics and palaeoseismology

The Yenice–Gönen Fault (YGF) is one of the most important active tectonic structures in the Biga peninsula. On March 18, 1953, a destructive earthquake (M_w = 7.2) occurred on the YGF, which is considered to be a part of the southern branch of the North Anatolian Fault Zone (NAFZ). A 70 km-long dextral surface rupture formed during the Yenice–Gönen Earthquake (YGE).In this study, structural and palaeoseismological features of the YGF have been investigated. The YGF surface ruptures have been mapped and three trenches were excavated at Muratlar, Karaköy and Seyvan sites.According to the palaeoseismic interpretation and the results of ¹⁴C AMS dating, Seyvan trench shows that an earthquake of palaeoseismic age ca. 620 AD ruptured a different strand of the 1953 fault, producing rather significant surface rupture displacement, while there are indications that at least two older events occurred during the past millennia. Another set of trenches excavated near Gönen town (Muratlar village) revealed extensive liquefaction not only during the 1953 event, but also during a previous earthquake, dated at 1440 AD. The Karaköy trench shows no indications of recent reactivations.Based on the trenching results, we estimate a recurrence interval of 660 ± 160 years for large morphogenic earthquakes, creating linear surface ruptures. The maximum reported displacement during the 1953 earthquake was 4.2 m. Taking into account the palaeoseismologically determined earthquake recurrence interval and maximum displacement, slip-rate of the YGF has been calculated to be 6.3 mm/a, which is consistent with present-day velocities determined by GPS measurements. According to the geological investigations, cumulative displacement of the YGF is 2.3 km. This palaeoseismological study contributes to model the behaviour of large seismogenic faults in the Biga Peninsula.     

Quaternary fault segmentation and interaction in the epicentral area of the 1561 earthquake (Mw = 6.4), Vallo di Diano, southern Apennines, Italy

The main structural characteristics of the Caggiano and Polla faults, exposed in the epicentral area of the 1561 earthquake (Mw = 6.4), southern Italy, have been investigated in detail to assess their spatial and temporal properties, and to evaluate their seismogenic potential. These right stepping normal faults show an overlap of about 7 km and an across strike separation of about 4 km. The geometric relationships between the Caggiano and Polla faults, but also the displacement distribution along each fault, demonstrate that they have been strongly interacting throughout the Pleistocene. Nevertheless, geological evidence of Holocene tectonic activity was mainly recognized along the Caggiano Fault (faulted late glacial deposits) and in the southernmost part of the Polla Fault (faulted deposits of probably Late Pleistocene age). This suggests that the Caggiano Fault can be considered as the most tectonically active fault in the Vallo di Diano Fault System. By calculating Coulomb stress changes, we have constrained modes of mechanical interactions between the two faults in a scenario compatible with the 1561 earthquake. This approach allows us to argue that both the Caggiano and the Polla Faults are probably linked at depth, and part of the same seismogenic structure which may be potentially responsible for composite ruptures with magnitude ≥ 6.5.     

Late Quaternary activity and dextral strike-slip movement on the Karakax Fault Zone, northwest Tibet

Field observations and interpretations of satellite images reveal that the westernmost segment of the Altyn Tagh Fault (called Karakax Fault Zone) striking WNW located in the northwestern margin of the Tibetan Plateau has distinctive geomorphic and tectonic features indicative of right-lateral strike-slip fault in the Late Quaternary. South-flowing gullies and N–S-trending ridges are systematically deflected and offset by up to ~ 1250 m, and Late Pleistocene–Holocene alluvial fans and small gullies that incise south-sloping fans record dextral offset up to ~ 150 m along the fault zone. Fault scarps developed on alluvial fans vary in height from 1 to 24 m. Riedel composite fabrics of foliated cataclastic rocks including cataclasite and fault gouge developed in the shear zone indicate a principal right-lateral shear sense with a thrust component. Based on offset Late Quaternary alluvial fans, ¹⁴C ages and composite fabrics of cataclastic fault rocks, it is inferred that the average right-lateral strike-slip rate along the Karakax Fault Zone is ~ 9 mm/a in the Late Quaternary, with a vertical component of ~ 2 mm/a, and that a M 7.5 morphogenic earthquake occurred along this fault in 1902. We suggest that right-lateral slip in the Late Quaternary along the WNW-trending Karakax Fault Zone is caused by escape tectonics that accommodate north–south shortening of the western Tibetan Plateau due to ongoing northward penetration of the Indian plate into the Eurasian plate.     

The 1984 Abruzzo earthquake (Italy): an example of seismogenic process controlled by interaction between differently oriented synkinematic faults

The evolution of the seismogenic process associated with the M_s 5.8 Sangro Valley earthquake of May 1984 (Abruzzo, central Italy) is closely controlled by the Quaternary extensional tectonic pattern of the area. This pattern is characterised by normal faults mainly NNW striking, whose length is controlled by pre-existing Mio–Pliocene N100±10° left-lateral strike-slip fault zones. These are partly re-activated as right-lateral normal-oblique faults under the Quaternary extensional regime and behave as transfer faults.Integration of re-located aftershocks, focal mechanisms and structural features are used to explain the divergence between the alignment of aftershocks (WSW–ENE) and the direction of seismogenic fault planes defined by the focal mechanisms (NNW–SSE) of the main shock and of the largest aftershock (M_s=5.3).The faults that appear to be involved in the seismogenic process are the NNW–SSE Barrea fault and the E–W M. Greco fault. There is field evidence of finite Quaternary deformation indicating that the normal Barrea fault re-activates the M. Greco fault as right-lateral transfer fault. No surface faulting was observed during the seismic sequence. The apparently incongruent divergence between aftershocks and nodal planes may be explained by interpreting the M. Greco fault as a barrier to the propagation of earthquake rupturing. The rupture would have nucleated on the Barrea fault, migrating along-strike towards NNW. The sharp variation in direction from the Barrea to the M. Greco fault segments would have represented a structural complexity sufficient to halt the rupture and subsequent concentration of post-seismic deformation as aftershocks around the line of intersection between the two fault planes.Fault complexities, similar to those observed in the Sangro Valley, are common features of the seismic zone of the Apennines. We suggest that the zones of interaction between NW–SE and NNW–SSE Plio-Quaternary faults and nearly E–W transfer faults, extending for several kilometres in the same way as M. Greco does, might act as barriers to the along-strike propagation of rupture processes during normal faulting earthquakes. This might have strong implications on seismic hazard, especially for the extent of the maximum magnitude expected on active faults during single rupture episodes.     

Late Pleistocene–Holocene environments in Valle Carbajal, Tierra del Fuego, Argentina

The authors discuss Late Pleistocene–Holocene depositional environments in one of the Fuegian Andes valleys on the basis of palynological, geomorphological, and sedimentological analyses from two sites located near the Beagle Channel. The results obtained at these localities reinforce and refine the Late Pleistocene–Holocene climatic pattern previously recorded there. A colder period, associated with the Younger Dryas stadial event, is suggested by low Nothofagus pollen frequency, and communities of grass, low scrub, and shrub heath expanded into the low/middle slopes (10,310 ¹⁴C yr BP). By ca. 9500 ¹⁴C yr BP, warmer and drier conditions occurred, as evidenced by the development of open-grown vegetation in the valley floors (pollen zone O-3), followed by the expansion of open Nothofagus woodland (pollen zone O-2) in the middle Holocene. The milder climate subsequently changed, as indicated by the spreading of the closed forest and mire (pollen zone O-1), to more humid and cooler conditions during the last ca. 5000 yr BP.     

Geophysical methods applied to fault characterization and earthquake potential assessment in the Lower Tagus Valley, Portugal

The study region is located in the Lower Tagus Valley, central Portugal, and includes a large portion of the densely populated area of Lisbon. It is characterized by a moderate seismicity with a diffuse pattern, with historical earthquakes causing many casualties, serious damage and economic losses. Occurrence of earthquakes in the area indicates the presence of seismogenic structures at depth that are deficiently known due to a thick Cenozoic sedimentary cover. The hidden character of many of the faults in the Lower Tagus Valley requires the use of indirect methodologies for their study. This paper focuses on the application of high-resolution seismic reflection method for the detection of near-surface faulting on two major tectonic structures that are hidden under the recent alluvial cover of the Tagus Valley, and that have been recognized on deep oil-industry seismic reflection profiles and/or inferred from the surface geology. These are a WNW–ESE-trending fault zone located within the Lower Tagus Cenozoic basin, across the Tagus River estuary (Porto Alto fault), and a NNE–SSW-trending reverse fault zone that borders the Cenozoic Basin at the W (Vila Franca de Xira–Lisbon fault). Vertical electrical soundings were also acquired over the seismic profiles and the refraction interpretation of the reflection data was carried out. According to the interpretation of the collected data, a complex fault pattern disrupts the near surface (first 400 m) at Porto Alto, affecting the Upper Neogene and (at least for one fault) the Quaternary, with a normal offset component. The consistency with the previous oil-industry profiles interpretation supports the location and geometry of this fault zone. Concerning the second structure, two major faults were detected north of Vila Franca de Xira, supporting the extension of the Vila Franca de Xira–Lisbon fault zone northwards. One of these faults presents a reverse geometry apparently displacing Holocene alluvium. Vertical offsets of the Holocene sediments detected in the studied geophysical data of Porto Alto and Vila Franca de Xira–Lisbon faults imply minimum slip rates of 0.15–0.30 mm/year, three times larger than previously inferred for active faults in the Lower Tagus Valley and maximum estimates of average return periods of 2000–5000 years for M 6.5–7 co-seismic ruptures.     

The Gubbio normal fault (Central Italy): geometry, displacement distribution and tectonic evolution

Normal faults within orogenic belts can be pre-, syn- or post-orogenic features. We studied the Gubbio normal fault (central Italy), which is an example of a pre-orogenic fault reactivated in a post-orogenic stage. The Gubbio Fault is a 22-km-long fault bordering a Quaternary basin and part of an active faults system in the Umbria–Marche region (Central Italy). The interpretation of a set of seismic profiles enables us to reconstruct the fault geometry in detail and to measure displacement and throw distributions along the fault strike. Seismic data indicate that the Gubbio Fault represents an example of multiple reactivation: at least a portion of the fault was active in the Miocene and only a part of the total displacement was achieved in the Quaternary. The reconstruction of the fault geometry at depth shows that the fault is characterised by listric geometry. The fault is also characterised by a bend along strike and structure contours show that this geometry is maintained at depth. As the fault is commonly addressed as presently active, the maximum fault dimensions are correlated to the maximum expected earthquake, and the presence of the fault bend is discussed as a possible barrier to seismic ruptures propagation.     

The Elbe Fault System in North Central Europe—a basement controlled zone of crustal weakness

The Elbe Fault System (EFS) is a WNW-striking zone extending from the southeastern North Sea to southwestern Poland along the present southern margin of the North German Basin and the northern margin of the Sudetes Mountains. Although details are still under debate, geological and geophysical data reveal that upper crustal deformation along the Elbe Fault System has taken place repeatedly since Late Carboniferous times with changing kinematic activity in response to variation in the stress regime. In Late Carboniferous to early Permian times, the Elbe Fault System was part of a post-Variscan wrench fault system and acted as the southern boundary fault during the formation of the Permian Basins along the Trans-European Suture Zone (sensu [Geol. Mag. 134 (5) (1997) 585]). The Teisseyre–Tornquist Zone (TTZ) most probably provided the northern counterpart in a pull-apart scenario at that time. Further strain localisation took place during late Mesozoic transtension, when local shear within the Elbe Fault System caused subsidence and basin formation along and parallel to the fault system. The most intense deformation took place along the system during late Cretaceous–early Cenozoic time, when the Elbe Fault System responded to regional compression with up to 4 km of uplift and formation of internal flexural highs. Compressional deformation continued during early Cenozoic time and actually may be ongoing. The upper crust of the Elbe Fault System, which itself reacted in a more or less ductile fashion, is underlain by a lower crust characterised by low P-wave velocities, low densities and a weak rheology. Structural, seismic and gravimetric data as well as rheology models support the assumption that a weak, stress-sensitive zone in the lower crust is the reason for the high mobility of the area and repeated strain localisation along the Elbe Fault System.     

Paleoliquefaction study of the Clarendon–Linden fault system, western New York State

The lack of earthquake-induced liquefaction features in Late Wisconsin and Holocene sediments in Genesee, Wyoming, and Allegany Counties suggests that the Clarendon–Linden fault system (CLF) did not generate large, moment magnitude, M≥6 earthquakes during the past 12,000 years. Given that it was the likely source of the 1929 M 4.9 Attica earthquake, however, the Clarenden–Linden fault system probably is capable of producing future M5 events. During this study, we reviewed newspaper accounts of the 1929 Attica earthquake, searched for earthquake-induced liquefaction features in sand and gravel pits and along tens of kilometers of river cutbanks, evaluated numerous soft-sediment deformation structures, compiled geotechnical data and performed liquefaction potential analysis of saturated sandy sediments. We found that the 1929 M 4.9 Attica earthquake probably did not induce liquefaction in its epicentral area and may have been generated by the western branch of the Clarendon–Linden fault system. Most soft-sediment deformation structures found during reconnaissance did not resemble earthquake-induced liquefaction features, and even the few that did could be attributed to non-seismic processes. Our analysis suggests that the magnitude threshold for liquefaction is between M 5.2 and 6, that a large (M≥6) earthquake would liquefy sediments at many sites in the area, and that a moderate earthquake (M 5–5.9) would liquefy sediments at some sites but perhaps not at enough sites to have been found during reconnaissance. We conclude that the Clarendon–Linden fault system could have produced small and moderate earthquakes, but probably not large events, during the Late Wisconsin and Holocene.     

Loess record of the Pleistocene–Holocene transition on the northern and central Great Plains, USA

Various lines of evidence support conflicting interpretations of the timing, abruptness, and nature of climate change in the Great Plains during the Pleistocene–Holocene transition. Loess deposits and paleosols on both the central and northern Great Plains provide a valuable record that can help address these issues. A synthesis of new and previously reported optical and radiocarbon ages indicates that the Brady Soil, which marks the boundary between late Pleistocene Peoria Loess and Holocene Bignell Loess, began forming after a reduction in the rate of Peoria Loess accumulation that most likely occurred between 13.5 and 15 cal ka. Brady Soil formation spanned all or part of the Bølling-Allerød episode (approximately 14.7–12.9 cal ka) and all of the Younger Dryas episode (12.9–11.5 cal ka) and extended at least 1000 years beyond the end of the Younger Dryas. The Brady Soil was buried by Bignell Loess sedimentation beginning around 10.5–9 cal ka, and continuing episodically through the Holocene. Evidence for a brief increase in loess influx during the Younger Dryas is noteworthy but very limited. Most late Quaternary loess accumulation in the central Great Plains was nonglacigenic and was under relatively direct climatic control. Thus, Brady Soil formation records climatic conditions that minimized eolian activity and allowed effective pedogenesis, probably through relatively high effective moisture.Optical dating of loess in North Dakota supports correlation of the Leonard Paleosol on the northern Great Plains with the Brady Soil. Thick loess in North Dakota was primarily derived from the Missouri River floodplain; thus, its stratigraphy may in part reflect glacial influence on the Missouri River. Nonetheless, the persistence of minimal loess accumulation and soil formation until 10 cal ka at our North Dakota study site is best explained by a prolonged interval of high effective moisture correlative with the conditions that favored Brady Soil formation. Burial of both the Brady Soil and the Leonard Paleosol by renewed loess influx probably represents eolian system response that occurred when gradual change toward a drier climate eventually crossed the threshold for eolian activity. Overall, the loess–paleosol sequences of the central and northern Great Plains record a broad peak of high effective moisture across the late Pleistocene to Holocene boundary, rather than well-defined climatic episodes corresponding to the Bølling-Allerød and Younger Dryas episodes in the North Atlantic region.     

龙首山南麓新发现的地震地表破裂带——兼论1954年山丹MS7?地震发震构造

基于详细的遥感解译和野外调查,发现龙首山南缘断裂发育有较新的地震地表破裂遗迹,包括断层坎、地震鼓包、河道的系统位错等断层地貌标志,破裂带总长度超过20 km,沿断裂走向其垂向位移介于0.35～4 m,水平位移介于0.3～1.9 m,龙首山南缘断裂主体表现为逆冲性质,仅在西端表现为局部左旋走滑的性质。通过剖面和探槽揭示,龙首山南麓地区全新世以来发生多次断层活动,最新的一次在约3.96 ka以来。经过与区域内的强震记录比对,认为此次新发现的地震地表破裂带可能是1954年山丹M_S 7地震所致。1954年山丹M_S 7地震在浅表沿两条断裂同时发生了地表破裂,表现为正花状构造的变形样式。这种同震位移分配现象以往多发现于走滑型地震中,此次在逆冲型地震中发现。龙首山南缘断裂地表破裂带的发现为揭示1954年山丹地震的震源过程和破裂样式提供了新的证据和思路。     

Preboreal climatic oscillations recorded by pollen and foraminifera in the southern Adriatic Sea

Core SA03-1 from the southern Adriatic Sea (EC-Eurostrataform project) provides new information about climate changes and palaeocirculation in the Adriatic region during the last deglaciation. The results of an integrated study based on pollen and foraminifera records of the part of the core spanning the late Pleistocene–early Holocene transition (including the late Younger Dryas, the Preboreal and the beginning of the Boreal) are presented. The major vegetation changes and the short-term oscillations occurred during the early Holocene warming in the southern Adriatic basin on the basis of a high-resolution pollen record are documented. Vegetation changes are correlated to short-term oscillations detected in the foraminifera record during the same interval. The two independent terrestrial and marine proxies indicate at least three short-term cold and dry oscillations occurring at 11.2–11, 10.8–10.4 and 10 cal ka BP, according to the age–depth model adopted in this study. Finally, adopting an event-stratigraphy approach, the comparison of these results with two western Mediterranean records of Preboreal short-term oscillations suggest the occurrence of synchronous bio-events in the Mediterranean basin.     

Faulting and effects of earthquakes on Minoan archaeological sites in Crete (Greece)

Examination of damages affecting the buildings of the archaeological sites of Phaistos and Agia Triada (southern Crete) suggests that these Minoan settlements were probably destroyed by two major seismic events characterized by MKS intensities of IX–X and occurred at the end of the Protopalatial (1700 BC) and the Neopalatial (1450 BC) periods. Geological and morphological studies carried out in the neighbouring areas show the occurrence of E–W trending Quaternary normal fault segments (Spili and Agia Galini faults) that control the present topography and morphology, and exhibit steep young scarps mostly Holocene in age. These fault segments are related to a NW–SE extension direction, which is consistent with that indicated by the available focal mechanisms of the earthquakes occurring in this area in the last 50 years. Combining structural and seismic data we can infer that the Spili and Agia Galini fault segments could represent good candidates to be considered active faults generating large earthquakes (M6.5) that were responsible for the damages of Phaistos and Agia Triada. This hypothesis suggests that the Minoan palatial centres were destroyed by several large earthquakes related to ruptures along distinct fault segments rather than by a single catastrophic event that caused the abrupt destruction of the Minoan civilisation in the eastern Mediterranean.     

Geotechnical characterization of the upper Pleistocene–Holocene alluvial deposits of Roma (Italy) by means of multivariate geostatistics: Cross-validation results

We are presenting an attempt to evaluate the spatial variability of geotechnical parameters in the upper Pleistocene–Holocene alluvial deposits of Roma (Italy) by means of multivariate geostatistics.The upper Pleistocene–Holocene alluvial deposits of Roma are sensitive to high levels of geohazard. They occupy a sizable and significant part of the city, being the foundation for many monuments, historical neighborhoods, and archaeological areas, and the main host of the present and future subway lines. We have stored information from more than 2000 geotechnical boreholes crossing the alluvial deposits into a relational database. For the present study, only the boreholes with lithologic/textural interpretation and geotechnical information were selected. The set includes 283 boreholes and 719 samples, which have a set of geotechnical information comprising physical properties and mechanical parameters.Techniques of multivariate statistics and geostatistics were combined and compared to evaluate the estimation methods of the mechanical parameters, with special reference to the drained friction angle from direct shear test (φ′). Principal Component Analysis was applied to the dataset to highlight the relationships between the geotechnical parameters. Through cross-validation analysis, multiple linear regression, kriging, and cokriging were tested as estimators of φ′. Cross-validation demonstrates that the cokriging with granulometries as auxiliary variables is the most suitable method to estimate φ′. In addition to proving that cokriging is a good estimator of φ′, cross-validation demonstrates that input data are coherent and this allows us to use them for estimation of geotechnical parameters, although they come from different laboratories and different vintages.Nevertheless, to get the same good results of cross-validation in estimation, it is necessary for granulometries to be available at grid points. Since this information being not available at all grid points, it is expected that, in the future, textural information can be derived in an indirect way, i.e., from lithologic/textural spatial reconstructions.     

Geometry of the fault zone of the 2003 Ms = 7.5 Chuya earthquake and associated stress fields, Gorny Altai

The co-seismic deformations produced during the September 27, 2003 Chuya earthquake (Ms = 7.5) that affected the Gorny Altai, Russia, are described and discussed along a 30 km long segment. The co-seismic deformations have manifested themselves both in unconsolidated sediments as R- and R′-shears, extension fractures and contraction structures, and in bedrock as the reactivation of preexisting schistosity zones and individual fractures, as well as development of new ruptures and coarse crushing zones. It has been established that the pattern of earthquake ruptures represents a typical fault zone trending NW–SE with a width reaching 4–5 km and a dextral strike–slip kinematics. The initial stress field that produced the whole structural pattern of co-seismic deformations during the Chuya earthquake, is associated with a transcurrent regime with a NNW–SSE, almost N–S, trending of compressional stress axis (σ₁), and a ENE–WSW, almost E–W, trending of tensional stress axis (σ₃). The state of stress in the newly-formed fault zone is relatively uniform. The local stress variations are expressed in insignificant deviation of σ₁ from N–S to NW–SE or NE–SW, in short-term fluctuations of relative stress values in keeping their spatial orientations, or in a local increase of the plunge angle of the σ₁. The geometry of the fault zone associated with the Chuya earthquake has been compared with the mechanical model of fracturing in large continental fault zones with dextral strike–slip kinematics. It is apparent that the observed fracture pattern corresponds to the late disjunctive stage of faulting when the master fault is not fully developed but its segments are already clearly defined. It has been shown that fracturing in widely different rocks follows the common laws of the deformation of solid bodies, even close to the Earth surface, and with high rates of movements.     

Geometry and kinematics of the Mosha Fault, south central Alborz Range, Iran: An example of basement involved thrusting

Field investigation of the western part of the Mosha Fault in several structural sections in the south central Alborz Range showed that the fault has a high angle of dip to the north, and emplaces Precambrian to Cenozoic rocks over the Eocene Karaj Formation. Study of the kinematics of the Mosha Fault in this area, based on S–C fabric and microstructures, demonstrates that it is a deep-seated semi-ductile thrust. Strain analysis on rock samples from different sections across the Mosha Fault shows a flattening pattern of deformation in which the long axis of the strain ellipsoid is aligned in the fault shear sense. The Mosha Fault is associated with a large hanging-wall anticline, cored by Precambrian rocks, and series of footwall synclines, formed of late Tertiary rocks. This geometry, together with several low angle short-cut thrusts in the fault footwall, implies that the Mosha Fault is an inverted normal fault which has been reactivated since the late Tertiary. In the study area, the reverse fault mechanism was associated with the rapid uplift and igneous activity in the central Alborz Range during the late Tertiary, unlike in the eastern portion of the fault, where the fault kinematics was replaced by a strike-slip mechanism in the Late Miocene.