Carbonate-silicate inclusions in garnet as evidence for a carbonate-bearing source for fluids in leucocratic granitoids associated with granulites of the Southern Marginal Zone,Limpopo Complex,South Africa

We present a study of carbonate-bearing polyphase inclusions in garnets from leucocratic granitoids intruding metapelitic granulites of the Southern Marginal Zone (SMZ) of the Neoarchean Limpopo high-grade complex, South Africa, during the post-peak stage (2710–2650 Ma; U-Pb ages for zircons and monazites). Ternary feldspar thermometry suggests that the granitoid magma cooled from temperatures 800–900 °C at a pressure of ca. 6.5 kbar. Abundant CO₂ fluid inclusions in quartz and T-X_CO2 phase equilibria modeling via PERPLE_X imply action of an essentially carbonic fluid in the granitoids. Cores of almandine-rich garnet grains from the granitoids contain polyphase carbonate-bearing inclusions with a distinct negative crystal shape. The major carbonate in the inclusions is a strongly zoned magnesite-siderite variety, whereas pyrophyllite is the predominant silicate phase. Raman spectra of unexposed inclusions revealed a presence of CO₂, as well as CH₄ and H₂O. The carbonate-bearing inclusions coexist with larger polyphase inclusions composed of biotite, quartz, K-feldspar, plagioclase, sillimanite, which are interpreted as relics of granitic melts. Modeling the mineral assemblage preserved within the carbonate-bearing inclusions shows that their present mineral and chemical compositions are a product of interaction of the trapped aqueous‑carbonic fluid with host garnet during cooling below 400 °C. Despite strong modifications, the inclusions bear evidence for initial saturation of the fluid with Mg‑carbonate. This is taken as an evidence for an origin of the fluids by devolatilization of the Mg-rich carbonate-bearing ultrabasic greenstone rocks of the Kaapvaal Craton that were buried under the SMZ. Being generated at temperatures between 650 and 700 °C, the fluid subsequently participated in anatexis and coexisted with the granite magma during exhumation and interaction of the SMZ granulites with cratonic rocks.     

Tectono-sedimentary evolution of active extensional basins controlling the deposition of the Middle Miocene Kareem Formation,southwestern Gulf of Suez,Egypt

The Naozhi Au–Cu deposit is located on the continental margin of Northeast China, forming part of the West Pacific porphyry–epithermal gold–copper metallogenic belt. In this paper, we systematically analyzed the compositions, homogenization temperatures, and salinity of fluid inclusions as well as their noble gas isotopic and Pb isotopic compositions from the deposit. These new data show that (1) five types of fluid inclusions were identified as pure gas inclusions (V-type), pure liquid inclusions (L-type), gas–liquid two-phase inclusions (W-type, as the main fluid inclusions (FIs)), CO₂-bearing inclusions (C-type), and daughter-mineral-bearing polyphase inclusions (S-type); (2) W-type FIs in quartz crystals of early, main, and late stage are homogenized at temperatures of 324.7–406.7, 230–338.8, and 154.6–308 °C, with salinities of 2.40–7.01 wt% NaCl_eq, 1.73–9.47 wt% NaCl_eq, and 6.29 wt% NaCl_eq, respectively. S-type FIs in quartz crystals of early stage are homogenized at temperatures of 328.6–400 °C, with salinities of 39.96–46.00 wt% NaCl_eq; (3) Raman analysis results reveal that the vapor compositions of early ore-forming fluids consisted of CO₂ and H₂O, with H₂O gradually increasing and CO₂ being absent at the late mineralization stage; (4) fluid inclusions in pyrite and chalcopyrite have ³He/⁴He ratios of 0.03–0.104 Ra, ²⁰Ne/²²Ne ratios of 9.817–9.960, and ⁴⁰Ar/³⁶Ar ratios of 324–349. These results indicate that the percentage of radiogenic ⁴⁰Ar* in fluid inclusions varies from 8.8 to 15.5 %, containing 84.5–91.2 % atmospheric ⁴⁰Ar; (5) the ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁶Pb/²⁰⁴Pb ratios of sulfides are 18.1822–18.3979, 15.5215–15.5998, and 38.1313–38.3786, respectively. These data combined with stable isotope data and the chronology of diagenesis and metallogenesis enable us suppose that the ore-forming fluids originated from the melting of the lower crust, caused by the subduction of an oceanic slab, whereas the mineralized fluids were exsolved from the late crystallization stage and subsequently contaminated by crustal materials/fluids during ascent, including meteoric water, and the mineral precipitation occurred at a shallow crustal level.

     

Calculated fluid evolution path versus fluid inclusion data in the COHN system as exemplified by metamorphic rocks from Rogaland, south-west Norway

Abstract Fluid evolution paths in the COHN system can be calculated for metamorphic rocks if there are relevant data regarding the mineral assemblages present, and regarding the oxidation and nitrodation states throughout the entire P-T loop. The compositions of fluid inclusions observed in granulitic rocks from Rogaland (south-west Norway) are compared with theoretical fluid compositions and molar volumes. The fluid parameters are calculated using a P-T path based on mineral assemblages, which are represented by rocks within the pigeonite-in isograd and by rocks near the orthopyroxene-in isograd surrounding an intrusive anorthosite massif. The oxygen and nitrogen fugacities are assumed to be buffered by the coexisting Fe-Ti oxides and Cr-carlsbergite, respectively. Many features of the natural fluid inclusions, including (1) the occurrence of CO₂-N₂-rich graphite-absent fluid inclusions near peak M2 metamorphic conditions (927° C and 400 MPa), (2) the non-existence of intermediate ternary CO₂-CH₄-N₂ compositions and (3) the low-molar-volume CO₂-rich fluid inclusions (36–42 cm³ mol^?1), are reproduced in the calculated fluid system. The observed CO₂-CH₄-rich inclusions with minor N₂ (5 mol%) should also include a large proportion of H₂O according to the calculations. The absence of H₂O from these natural high-molar-volume CO₂-CH₄-rich inclusions and the occurrence of natural CH₄-N₂-rich inclusions are both assumed to result from preferential leakage of H₂O. This has been previously experimentally demonstrated for H₂O-CO₂-rich fluid inclusions, and has also been theoretically predicted. Fluid-deficient conditions may explain the relatively high molar volumes, but cannot be used to explain the occurrence of CH₄-N₂-rich inclusions and the absence of H₂O.     

Mineral Paragenesis, Fluid Inclusions and Sulfur Isotope Systematics of the Lepanto Far Southeast Porphyry Cu-Au Deposit, Mankayan, Philippines

Abstract: The Lepanto Far Southeast porphyry Cu‐Au deposit is located beneath and to the southeast of the Lepanto enargite‐luzonite Cu–Au deposit in Mankayan, Benguet Province, Philippines. The principal orebody consists of potassic alteration subjected to partial retrograde chlorite alteration that rims stock‐work of quartz‐anhydrite veinlets. Fluid inclusions found in stockwork quartz and anhydrite in the biotitized orebody center are dominated by polyphase inclusions that homogenize at temperatures of >500C. Sulfur isotopic thermometry applied to the sulfides‐anhydrite pairs suggests around 500C. The principal ore minerals associated with quartz‐anhydrite stockworks are chalcopyrite and pyrite with minor bornite and Bi–Te–bearing tennantite, with trace of native gold. Rounded pyrite grains appear fractured and corroded and are interpreted as remnants of primary intermediate solid solution + pyrite assemblage. A breccia pipe truncates the deposit. Mineralization in the breccia pipe is brought by quartz‐anhydrite veinlets and infilling in the interstices between clasts. Chalcopyrite‐Au mineralization associated with molybdenite is recognized in the deeper zone in the breccia pipe. Fluid inclusion microthermometry on polyphase inclusions in veinlet quartz as well as sulfur isotope thermometry applied for the pair of anhydrite and sulfides suggests >450C. Fluid inclusions in veinlet quartz and anhydrite in the fringe advanced argillic alteration are chiefly composed of coexisting liquid‐rich inclusions and gas‐rich inclusions, in addition to coexisting polyphase inclusions and gas‐rich inclusions. These inclusions exhibit a wide range of homogenization temperatures, suggesting heterogeneous entrapping in the two‐fluid unmixing region. Sulfur isotopes of aqueous sulfide and sulfate exhibit a general trend from the smallest fractionation pairs (about 11%) in the biotitized orebody center to the largest fractionation (about 25%) pairs in the fringe advanced argillic alteration, suggesting a simple evolution of hydrothermal system. The slopes of arbitrary regression lines in δ³⁴S versus ³⁴S[SO₄ = –H₂S] diagram suggest that the abundance ratio of aqueous sulfate to sulfide in the hydrothermal fluid has been broadly constant at about 1:3 through temperature decrease. The intersection of these two regression lines at the δ³⁴S axis indicates that the bulk δ³⁴S is about +6%. Thus, the Lepanto FSE deposit is a further example which confirms enrichment in ³⁴S in the hydrous intermediate to silicic magmas and associated magmatic hydrothermal deposits in the western Luzon arc.     

Petrogenetic analysis of fluid and melt inclusions in minerals from mantle xenoliths from the Bele pipe basanites (North Minusa depression)

Results of study of different types of inclusions in minerals from mantle xenoliths from the Bele pipe basanites are presented. Two groups of inclusions were recognized in the host minerals according to their genesis. The first group includes single, apparently primary, fluid inclusions. They were discovered only in orthopyroxenes and consist of CO₂ (95 mol.%) and N₂ (5 mol.%). These inclusions had partly leaked. The densities of two least leaked inclusions from different xenoliths are 1.05 and 1.14 g/cm³, and their trapping pressures are estimated at >8.5 and 12 kbar, respectively. The second group includes syngenetic secondary fluid, melt, and crystalline inclusions. In composition the secondary fluid inclusions differ from the primary ones in higher concentrations of N₂ (up to 7 mol.%). Their maximum density is 0.57 g/cm³, which corresponds to 2.4–2.6 kbar and 1100–1200 °C (homogenization temperature of secondary melt inclusions). Comparison of data on melt inclusions in xenolith minerals and host-basanite phenocrysts shows that the secondary inclusions in the xenoliths are, most likely, the result of infiltration and partial reaction of basanitic melt with the xenoliths. On the ascent, the basanitic melt vigorously reacted with mantle xenoliths, which led to the appearance of secondary inclusions in nodule minerals at shallow depths and interstitial mineral assemblages in the xenoliths.     

CO<Subscript>2</Subscript>-rich fluid inclusions with chalcopyrite daughter mineral from the Fenghuangshan Cu–Fe–Au deposit,China: implications for metal transport in vapor

CO₂-rich fluid inclusions containing opaque mineral crystals were found in the Fenghuangshan skarn-porphyry Cu–Fe–Au deposit in Tongling, Anhui, China. These inclusions show variable CO₂ contents and are accompanied by aqueous inclusions, both occurring as secondary inclusions in quartz and being locally associated with chalcopyrite mineralization. Laser Raman microspectroscopic analyses confirm the predominance of CO₂ in the vapor and the presence of H₂S as high as 8 mol%, and identify the opaque mineral with yellow reflectance color in the inclusions as chalcopyrite. More than half of the CO₂-bearing inclusions contains chalcopyrite, whereas few of the associated aqueous inclusions do so. The chalcopyrite, occupying less than 1% (volume) of the inclusions, is interpreted to be a daughter mineral, and calculated Cu concentrations in the inclusions range from 0.1 to 3.4 wt%. Copper is inferred to have been transported in CO₂-dominated fluids as HS⁻ complexes. The occurrence of chalcopyrite daughter crystals in CO₂-rich fluid inclusions indicates that CO₂-rich vapor has the capacity of transporting large amounts of Cu, and possibly Au. This finding has significant implications for metal transport and mineralization in hydrothermal systems enriched in CO₂, such as orogenic-type and granitic intrusion-related gold deposits.     

Origin of CO2-rich fluid inclusions in synorogenic veins from the Eastern Mount Isa Fold Belt, NW Queensland, and their implications for mineralization

Synorogenic veins from the Proterozoic Eastern Mount Isa Fold Belt contain three different types of fluid inclusions: CO₂-rich, aqueous two-phase and rare multiphase. Inclusions of CO₂ without a visible H₂O phase are particularly common. The close association of CO₂-rich inclusions with aqueous two-phase, and possibly multiphase inclusions suggests that phase separation of low- to -moderate salinity CO₂-rich hydrothermal fluids led to the selective entrapment of the CO₂. Microthermometric results indicate that CO₂-rich inclusions homogenize between –15.5 and +29.9 °C which corresponds to densities of 0.99 to 0.60 g.cm⁻³. The homogenization temperatures of the associated aqueous two-phase inclusions are 127–397 °C, with salinities of 0.5 to 18.1 wt.% NaCl equivalent. The rarely observed multiphase inclusions homogenize between 250 and 350 °C, and have salinities ranging from 34.6 to 41.5 wt.% NaCl equivalent. Evidence used to support the presence of fluid immiscibility in this study is mainly derived from observations of coexisting H₂O-rich and CO₂-rich inclusions in groups and along the same trail. In addition, these two presumably unmixed fluids are also found on adjacent fractures where monophase CO₂-rich inclusions are closely related to H₂O-rich inclusions. Similar CO₂-rich inclusions are widespread in mineral deposits in this region, which are simply metal-enriched synorogenic veins. Therefore, we argue that fluid immiscibility caused volatile species such as CO₂ and H₂S to be lost from liquid, thus triggering ore deposition by increasing the fluid pH and decreasing the availability of complexing ligands. Received: 28 April 1997 / Accepted: 4 January 1999     

Decrepitated UHP fluid inclusions: about diverse phase assemblages and extreme decompression rates (Erzgebirge, Germany)

Minute polyphase inclusions in garnet of quartzofeldspathic rocks (saidenbachite) from the Saxonian Erzgebirge, Germany, contain microdiamond or graphite, phlogopite, quartz, paragonite, phengite and other minerals in minor amounts. These inclusions are interpreted to represent an original dense COH + silicate fluid, trapped in crystallizing garnet at depths of >150 km. Inspection of the inclusion population in a single garnet by SEM reveals two characteristic features: (i) The shape of most inclusions indicates healed radial cracks in the host garnet, and, thus, the buildup of a significant differential pressure ΔP, i.e. a contrast in pressure between the inclusion (P_i) and the host mineral (P_e). The mineral assemblages sealing the cracks and showing an equilibrated microstructure indicate temperatures of ～750 ± 50 °C and pressures below 2.5 GPa. (ii) The diverse types of inclusions appear to be randomly distributed in the garnet host. Thus, the variable phase assemblages do not reflect a compositional evolution of the fluid trapped in the garnet. Combining observations (i) and (ii), we propose that the diversity of the phase assemblage in the inclusions is the result of decrepitation at different times, and thus, of distinct histories of P_i, as ΔP at decrepitation is primarily controlled by inclusion size and shape. Applying a flow law for dislocation creep of garnet, a low strength of garnet at 750 ± 50 °C for low geological strain rates is predicted. Thus, differential pressure should have been kept low (i.e. P_i≈ P_e) by continuous stretching of the inclusion for typical exhumation rates of metamorphic rocks. To attain the differential pressure (P_i >> P_e) required for catastrophic brittle failure of the garnet host, the decompression rate must have been extremely high. As a robust lower bound, a minimum exhumation rate on the order of 100 m year^?1 is suggested, which corresponds to ascent rates of magma.     

Fluid evolution in the Kolar Gold Field: evidence from fluid inclusion studies

Gold mineralization in the Kolar schist belt of the Dharwar craton occurs dominantly in the form of a sulfide-poor Au-quartz lode (the Champion lode exposed in the Mysore and other mines) and sulfide-rich auriferous lodes (from the Nundydroog mine). Fluid inclusion microthermometric experiments were conducted on primary inclusions in quartz intimately associated with Au-mineralization. Homogenization studies on aqueous-biphase (L + V), aqueous polyphase (L + V+ halite) and aqueous-carbonic (L_CO2± V_CO2 + L_aq) inclusions from the Champion lode furnish a temperature range of 120 to 420 °C. Freezing of aqueous biphase inclusions and dissolution of halite in the aqueous polyphase inclusions provide salinity of 5 to 50 wt.% NaCl equivalent. Fluid inclusion thermobarometry from the total homogenization of aqueous-carbonic inclusions and from intersecting isochores of coeval pure-carbonic (L_CO2± V_CO2) and pure-aqueous inclusions constrain the P-T path of evolution of the fluid in the Champion lode. Gold precipitation was likely to have been brought about in response to a sharp fall in pressure with attendant unmixing of liquid-CO₂ from the parent H₂O-CO₂ fluid of possible metamorphic origin. This would imply transportation of gold by some pressure-sensitive complex such as the Au-carbonyl. Fluid characteristics are different in the sulfide-rich auriferous lodes, as indicated by the virtual absence of the CO₂-bearing and the halite-bearing inclusions. The fluid evolution path, as evident from the crude positive colinearity of temperature and salinity, is due to mixing of a low (≤200 °C) temperature-low saline (≤7 wt.% NaCl equivalent) fluid with a high temperature (≥400 °C)-high saline (≥50 wt.% NaCl equivalent) fluid. The lack of CO₂ and association of Au with sulfides indicate a different mode of gold transport, as chloride or bisulfide complexing, deposition of which was possibly brought about by fluid mixing. Received: 17 April 1997 / Accepted: 30 June 1998     

Fluid inclusion evidence for petroleum accumulation in northern Qaidam Basin

Based on the results of fluid inclusion study (microscopic characteristics, homogenization temperatures and grains with oil inclusions), the pool-forming time of the Nanbaxian and Mabei 1 oilfields in northern Qaidam Basin was discussed in this paper. Fluid inclusions in northern Qaidam Basin are relatively abundant, including aqueous inclusions and hydrocarbon inclusions. These inclusions are small (5–10 μm), and mainly distributed in quartz fissures, overgrowths and cementations. The abundances of grains with oil inclusions (GOI) are commonly low. The GOI values of most samples are between 2.0%–10.5%, and those of about 40 percent of total samples exceed 5%. The homogenization temperatures of fluid inclusions in different samples are markedly dissimilar, indicating that these inclusions were formed in different periods. According to the measured homogenization temperatures of fluid inclusions and in combination with burial history and thermal evolution history, the Nanbaxian and Mabei 1 oilfields are deduced, which have experienced two hydrocarbon charging periods, with the former of N₁-N₂ ¹ and N₂ ²–N₂ ³, and the latter of N₁ and N₁ end −N₂, respectively.     

Study on the Physical and Chemical Conditions of Ore Formation of Hetai Ductile Shear Zone—Hosted Gold Deposit and Discovery of Melt Inclusions

The Hetai ductile shear zone-hosted gold deposit occurs in the deep-seated fault mylonite zone of the Sinian-Silurian metamorphic rock series. In this study there have been discovered melt inclusions, fluid-melt inclusions and organic inclusions in ore-bearing quartz veins of the ore deposit and mylonite for the first time. The homogenization temperatures of the various types of inclusions are 160℃, 180 - 350℃, 530℃ and 870℃ for organic inclusions, liquid inclusions, two-phase immiscible liquid inclusions and melt inclusions, respectively. Ore fluid is categorized as the neutral to basic K+ -Ca2+ -Mg2+ -Na+ - SO2- 4-HCO3-Cl- system. The contents of trace gases follow a descending order of H2O＞CO2＞CH4＞(or ＜ ) H2＞CO＞C2H2＞C2I-I6＞O2＞N2.The concentrations of K , Ca2 + ,SO2-4,HCO3-,Cl- H2O and C2H2 in fluid inclusions are related to the contents of gold and the Au/Ag ratios in ores from different levels of the gold deposit. This is significant for deep ore prospecting in the region. Daughter minerals in melt inclusions were analyzed using SEM. Quartz, orthoclase, wollastonite and other silicate minerals were identified. They were formed in different mineral assemblages.This analysis further proves the existence of melt inclusions in ore veins. Sedimentary metamorphic rocks could form silicate melts during metamorphic anatexis and dynamic metamorphism, which possess melt-solution characteristics. Ore formation is related to the multi-stage forming process of silicate melt and fluid.     

Occurrences of Ore Minerals and Fluid Inclusion Study on the Kingking Porphyry Copper–Gold Deposit, Eastern Mindanao, Philippines

The Kingking deposit is a gold‐rich porphyry copper deposit and the southernmost deposit at the eastern Mindanao mineralized belt, Philippines. It is underlain by Cretaceous–Paleogene sedimentary and volcanic rocks that are intruded by mineralized Miocene diorite porphyries and by barren Miocene–Pliocene dacite and diorite porphyries. The main alteration zones in the deposit are the inner potassic zone and the outer propylitic zone. The biotite‐bearing diorite and hornblende diorite porphyries are the primary host rocks of mineralization. Two dominant copper minerals, bornite and chalcopyrite, which usually occur as fracture fillings, are associated with fine crystalline quartz veinlet stockworks in the mineralized diorites. Minor secondary covellite, chalcocite and digenite are also observed. The primary Cu‐Fe sulfide phases initially deposited from ore fluids consisted of bornite solid solution (bnss) and intermediate solid solution (iss), which decomposed to form the bornite and chalcopyrite. Peculiar bornite pods that are different from dissemination and are associated with volcanic rock xenoliths in biotite‐bearing diorite porphyry are noted in a drill hole. These pods of bornite are not associated with quartz veinlet stockworks. Fluid inclusion analyses show three types of inclusions contained in Kingking samples: two‐phase fluid‐rich and vapor‐rich inclusions and polyphase hypersaline inclusions from porphyry‐type quartz veinlet stockworks. The liquid–vapor homogenization temperatures (T_H) and the dissolution temperature of halite daughter crystals (T_M) from the polyphase hypersaline inclusions predominantly range from 400°C up to >500°C. The wide range of T_H and T_M may be due to heterogeneous trapping of variable ratios of vapor and brine. For some inclusions, T_H > T_M and in some cases, T_H < T_M, indicating that some of the brine was supersaturated or saturated with NaCl at the time of entrapment. Calculated salinity of the polyphase hypersaline inclusions ranges from 40 to 60% NaCl equivalent. Temperature and vapor pressure of mineralized fluid were estimated to be 400°C and 16 MPa.     

CO2-rich fluid inclusions in the Whitestone Anorthosite: implications for the retrograde history of the Parry Sound Shear Zone, Grenville Province, Canada

The Whitestone Anorthosite (WSA), located in southern Ontario, underwent granulite facies metamorphism during the Grenville orogeny at 1.16 Ga. During the waning stages of metamorphism fluids infiltrated the outer portions of the anorthosite and promoted the formation of an envelope comprised of upper amphibolite facies mineral assemblages. Also, this envelope corresponds to portions of the anorthosite that underwent deformation related to movement along a high-grade ductile shear zone. Samples from this portion of the anorthosite (the margin) contain CO₂-rich inclusions in plagioclase porphyroclasts (relict igneous phenocrysts), matrix plagioclase and garnet. These inclusions have features which normally are interpreted as indicating that they are texturally primary, but they have relatively low CO₂ densities (0.61–0.95 g cm^-3). Plagioclase from the anorthosite interior contains texturally secondary inclusions with relatively high CO₂ densities (generally from 0.99 to 1.10 g cm^-3). The high CO₂ densities suggest that the inclusions in the plagioclase of the anorthosite core formed prior to inclusions in porphyroclast minerals of the outer portions of the anorthosite, an interpretation that is apparently inconsistent with inclusion textures. This apparent paradox indicates that most fluid inclusions from the anorthosite margin were formed during, or were modified by, the dynamic recrystallization that affected this portion of the WSA. In either case, late formation or modification, the texturally primary fluid inclusions do not contain pristine samples of the peak metamorphic fluid. Furthermore, because shear-related deformation is apparently associated with entrapment of the lowest fluid densities, some strain localization persisted to relatively low temperatures (e.g. less than approximately 500° C). These results constrain a part of the retrograde P–T path for this portion of the Grenville Orogen to temperatures of approximately 400–500° C at pressures of approximately 1–2 kbar.     

Fluid Inclusions and Hydrogen,Oxygen, Sulfur Isotopes of Nuri Cu‐W‐Mo Deposit in the Southern Gangdese,Tibet

The Nuri Cu‐W‐Mo deposit is located in the southern subzone of the Cenozoic Gangdese Cu‐Mo metallogenic belt. The intrusive rocks exposed in the Nuri ore district consist of quartz diorite, granodiorite, monzogranite, granite porphyry, quartz diorite porphyrite and granodiorite porphyry, all of which intrude in the Cretaceous strata of the Bima Group. Owing to the intense metasomatism and hydrothermal alteration, carbonate rocks of the Bima Group form stratiform skarn and hornfels. The mineralization at the Nuri deposit is dominated by skarn, quartz vein and porphyry type. Ore minerals are chalcopyrite, pyrite, molybdenite, scheelite, bornite and tetrahedrite, etc. The oxidized orebodies contain malachite and covellite on the surface. The mineralization of the Nuri deposit is divided into skarn stage, retrograde stage, oxide stage, quartz‐polymetallic sulfide stage and quartz‐carbonate stage. Detailed petrographic observation on the fluid inclusions in garnet, scheelite and quartz from the different stages shows that there are four types of primary fluid inclusions: two‐phase aqueous inclusions, daughter mineral‐bearing multiphase inclusions, CO₂‐rich inclusions and single‐phase inclusions. The homogenization temperature of the fluid inclusions are 280°C–386°C (skarn stage), 200°C–340°C (oxide stage), 140°C–375°C (quartz‐polymetallic sulfide stage) and 160°C–280°C (quartz‐carbonate stage), showing a temperature decreasing trend from the skarn stage to the quartz‐carbonate stage. The salinity of the corresponding stages are 2.9%–49.7 wt% (NaCl) equiv., 2.1%–7.2 wt% (NaCl) equiv._, 2.6%–55.8 wt% (NaCl) equiv. and 1.2%–15.3 wt% (NaCl) equiv., respectively. The analyses of CO₂‐rich inclusions suggest that the ore‐forming pressures are 22.1 M Pa–50.4 M Pa, corresponding to the depth of 0.9 km–2.2 km. The Laser Raman spectrum of the inclusions shows the fluid compositions are dominated in H₂O, with some CO₂ and very little CH₄, N₂, etc. δD values of garnet are between ?114.4‰ and ?108.7‰ and δ¹⁸O_H2O between 5.9‰ and 6.7‰; δD of scheelite range from ?103.2‰ to ?101.29‰ and δ¹⁸O_H2O values between 2.17‰ and 4.09‰; δD of quartz between ?110.2‰ and ?92.5‰ and δ¹⁸O_H2O between ?3.5‰ and 4.3‰. The results indicate that the fluid came from a deep magmatic hydrothermal system, and the proportion of meteoric water increased during the migration of original fluid. The δ³⁴S values of sulfides, concentrated in a rage between ?0.32‰ to 2.5‰, show that the sulfur has a homogeneous source with characteristics of magmatic sulfur. The characters of fluid inclusions, combined with hydrogen‐oxygen and sulfur isotopes data, show that the ore‐forming fluids of the Nuri deposit formed by a relatively high temperature, high salinity fluid originated from magma, which mixed with low temperature, low salinity meteoric water during the evolution. The fluid flow through wall carbonate rocks resulted in the formation of layered skarn and generated CO₂ or other gases. During the reaction, the ore‐forming fluid boiled and produced fractures when the pressure exceeded the overburden pressure. Themeteoric water mixed with the ore‐forming fluid along the fractures. The boiling changed the pressure and temperature, oxygen fugacity, physical and chemical conditions of the whole mineralization system. The escape of CO₂ from the fluid by boiling resulted in scheelite precipitation. The fluid mixing and boiling reduced the solubility of metal sulfides and led the precipitation of chalcopyrite, molybdenite, pyrite and other sulfide.     

Fluid Inclusions and Hydrogen,Oxygen, and Lead Isotopes of the Antuoling Molybdenum Deposit,Northern Taihang Mountains,China

The Antuoling Mo deposit is a major porphyry‐type deposit in the polymetallic metallogenic belt of the northern Taihang Mountains, China. The processes of mineralization in this deposit can be divided into three stages: an early quartz–pyrite stage, a middle quartz–polymetallic sulfide stage, and a late quartz–carbonate stage. Four types of primary fluid inclusions are found in the deposit: two‐phase aqueous inclusions, daughter‐mineral‐bearing multiphase inclusions, CO₂–H₂O inclusions, and pure CO₂ inclusions. From the early to the late ore‐forming stages, the homogenization temperatures of the fluid inclusions are 300 to >500°C, 270–425°C, and 195–330°C, respectively, with salinities of up to 50.2 wt%, 5.3–47.3 wt%, and 2.2–10.4 wt% NaCl equivalent, revealing that the ore‐forming fluids changed from high temperature and high salinity to lower temperature and lower salinity. Moreover, based on the laser Raman spectra, the compositions of the fluid inclusions evolved from the NaCl–CO₂–H₂O to the NaCl–H₂O system. The δ¹⁸O_H2O and δD values of quartz in the deposit range from +3.9‰ to +7.0‰ and ?117.5‰ to ?134.2‰, respectively, reflecting the δD of local meteoric water after oxygen isotopic exchange with host rocks. The Pb isotope values of the sulfides (²⁰⁸Pb/²⁰⁴Pb, 36.320–37.428; ²⁰⁷Pb/²⁰⁴Pb, 15.210–15.495; ²⁰⁶Pb/²⁰⁴Pb, 16.366–17.822) indicate that the ore‐forming materials originated from a mixed upper mantle–lower crust source.     

A Study of Ore-forming Fluids in the Shimensi Tungsten Deposit, Dahutang Tungsten Polymetallic Ore Field, Jiangxi Province, China

The Dahutang tungsten polymetallic ore field is located north of the Nanling W-Sn polymetallic metallogenic belt and south of the Middle—Lower Yangtze River Valley Cu-Mo-Au-Fe porphyry-skarn belt.It is a newly discovered ore field,and probably represents the largest tungsten mineralization district in the world.The Shimensi deposit is one of the mineral deposits in the Dahutang ore field,and is associated with Yanshanian granites intruding into a Neoproterozoic granodiorite batholith.On the basis of geologic studies,this paper presents new petrographic,microthermometric,laser Raman spectroscopic and hydrogen and oxygen isotopic studies of fluid inclusions from the Shimensi deposit.The results show that there are three types of fluid inclusions in quartz from various mineralization stages:liquid-rich two-phase fluid inclusions,vapor-rich two-phase fluid inclusions,and three-phase fluid inclusions containing a solid crystal,with the vast majority being liquid-rich two-phase fluid inclusions.In addition,melt and melt-fluid inclusions were also found in quartz from pegmatoid bodies in the margin of the Yanshanian intrusion.The homogenization temperatures of liquid-rich two-phase fluid inclusions in quartz range from 162 to 363℃ and salinities are 0.5wt%-9.5wt%NaCI equivalent.From the early to late mineralization stages,with the decreasing of the homogenization temperature,the salinity also shows a decreasing trend.The ore-forming fluids can be approximated by a NaCl-H_2O fluid system,with small amounts of volatile components including CO_2,CH_4 and N_2,as suggested by Laser Raman spectroscopic analyses.The hydrogen and oxygen isotope data show that δ5D_(V-smow) values of bulk fluid inclusions in quartz from various mineralization stages vary from-63.8‰ to-108.4‰,and the δ~(18)O_(H2O) values calculated from the δ~(18)O_(V-)smow values of quartz vary from-2.28‰ to 7.21‰.These H-O isotopic data are interpreted to indicate that the ore-forming fluids are mainly composed of magmatic water in the early stage,and meteoric water was added and participated in mineralization in the late stage.Integrating the geological characteristics and analytical data,we propose that the ore-forming fluids of the Shimensi deposit were mainly derived from Yanshanian granitic magma,the evolution of which resulted in highly differentiated melt,as recorded by melt and melt-fluid inclusions in pegmatoid quartz,and high concentrations of metals in the fluids.Cooling of the ore-forming fluids and mixing with meteoric water may be the key factors that led to mineralization in the Dahutang tungsten polymetallic ore field.     

Ore Geology,Fluid Inclusion,and S‐ and Pb‐Isotopic Constraints on the Genesis of the Chitudian Zn‐Pb Deposit,Southern Margin of the North China Craton

The Chitudian Zn‐Pb ore deposit, Luanchuan, Henan province, was recently discovered in the southern margin of the North China Craton. The Zn‐Pb orebodies are hosted in the Proterozoic Guandaokou and Luanchuan Groups, occurring as veins in interbedding fracture zones mainly in a WNW‐ and partially in a NS‐direction. The Zn‐Pb ores are characterized by banded, massive, and breccia structures, coarse crystal grains, and a simple mineral composition mainly of galena, sphalerite, pyrite, quartz, dolomite, and calcite. In addition to the vein type orebodies, there are Mo‐ and Zn‐bearing skarn orebodies in the northwest of the Chitudian ore field. Four types of primary fluid inclusions in quartz and calcite were recognized in the Chitudian Zn‐Pb ores, including aqueous, aqueous‐CO₂, daughter‐mineral‐bearing aqueous, and daughter‐mineral‐bearing aqueous‐CO₂ inclusions, with aqueous inclusion being most common. The homogenization temperatures of the fluid inclusions from the main mineralization stage are from 290°C to 340°C, and the salinities mainly from 3.7 to 14.8 wt% NaCl equivalent. In addition to CO₂, CH₄ and H₂S were detected in the vapor phase and HS^‐ in the liquid phase of the fluid inclusions by Laser Raman spectroscopy. The δ³⁴S_V‐CDT values of ore sulfides from the Chitudian deposit range from ?0.32‰ to 8.30‰, and show two modal peaks in the histogram, one from 1‰ to 4‰, and the other from 5‰ to 7‰. The former peak is similar to that of porphyry‐type Mo‐W deposits in the area, whereas the latter is relatively close to the sulfur in the strata. The ore sulfur may have been derived from both the magma and the strata. The Pb‐isotopic compositions of the ore minerals from Chitudian, with ²⁰⁶Pb/²⁰⁴Pb from 17.005 to l7.953, ²⁰⁷Pb/²⁰⁴Pb from 15.414 to 15.587, and ²⁰⁸Pb/²⁰⁴Pb from 37.948 to 39.036, are similar to those of Mesozoic porphyries in the Chitudian ore field, suggesting that the ore‐forming metals were mainly derived from the Mesozoic magmatic intrusions. The Chitudian Zn‐Pb deposit is interpreted to be a distal hydrothermal vein‐type deposit, which was genetically related to the proximal, skarn‐type Mo ore deposits in the region.     

Ore genesis of Badi copper deposit,northwest Yunnan Province,China: evidence from geology,fluid inclusions,and sulfur,hydrogen and oxygen isotopes

The Badi copper deposit is located in Shangjiang town, Shangri-La County, Yunnan Province. Tectonically, it belongs to the Sanjiang Block. Vapor–liquid two-phase fluid inclusions, CO₂-bearing fluid inclusions, and daughter-bearing inclusions were identified in sulfide-rich quartz veins. Microthermometric and Raman spectroscopy studies revealed their types of ore-forming fluids: (1) low-temperature, low-salinity fluid; (2) medium-temperature, low salinity CO₂-bearing; and (3) high-temperature, Fe-rich, high sulfur fugacity. The δ¹⁸O values of chalcopyrite-bearing quartz ranged from 4.96‰ to 5.86‰, with an average of 5.40‰. The δD values of ore-forming fluid in equilibrium with the sulfide-bearing quartz were from ? 87‰ to ? 107‰, with an average of ? 97.86‰. These isotopic features indicate that the ore-forming fluid is a mixing fluid between magmatic fluid and meteoric water. The δ³⁴S values of chalcopyrite ranged from 13.3‰ to 15.5‰, with an average of 14.3‰. Sulfur isotope values suggest that the sulfur in the deposit most likely derived from seawater. Various fluid inclusions coexisted in the samples; similar homogenization temperature to different phases suggests that the Badi fluid inclusions might have been captured under a boiling system. Fluid boiling caused by fault activity could be the main reason for the mineral precipitation in the Badi deposit.     

Formation of the Campbell-Red Lake gold deposit by H2O-poor, CO2-dominated fluids

The Campbell-Red Lake gold deposit in the Red Lake greenstone belt, with a total of approximately 840 t of gold (past production + reserves) and an average grade of 21 g/t Au, is one of the largest and richest Archean gold deposits in Canada. Gold mineralization is mainly associated with silicification and arsenopyrite that replace carbonate veins, breccias and wallrock selvages. The carbonate veins and breccias, which are composed of ankerite ± quartz and characterized by crustiform–cockade textures, were formed before and/or in the early stage of penetrative ductile deformation, whereas silicification, arsenopyrite replacement and gold mineralization were coeval with deformation. Microthermometry and laser Raman spectroscopy indicate that fluid inclusions in ankerite and associated quartz (Q1) and main ore-stage quartz (Q2) are predominantly carbonic, composed mainly of CO₂, with minor CH₄ and N₂. Aqueous and aqueous–carbonic inclusions are extremely rare in both ankerite and quartz. H₂O was not detected by laser Raman spectroscopic analyses of individual carbonic inclusions and by gas chromatographic analyses of bulk samples of ankerite and main ore-stage quartz (Q2). Fluid inclusions in post-mineralization quartz (Q3) are also mainly carbonic, but proportions of aqueous and aqueous–carbonic inclusions are present. Trace amounts of H₂S were detected by laser Raman spectroscopy in some carbonic inclusions in Q2 and Q3, and by gas chromatographic analyses of bulk samples of ankerite and Q2. ³He/⁴He ratios of bulk fluid inclusions range from 0.008 to 0.016 Ra in samples of arsenopyrite and gold. Homogenization temperatures (T _h–CO₂) of carbonic inclusions are highly variable (from −4.1 to +30.4°C; mostly to liquid, some to vapor), but the spreads within individual fluid inclusion assemblages (FIAs) are relatively small (within 0.5 to 10.3°C). Carbonic inclusions occur both in FIAs with narrow T _h–CO₂ ranges and in those with relatively large T _h–CO₂ variations. The predominance of carbonic fluid inclusions has been previously reported in a few other gold deposits, and its significance for gold metallogeny has been debated. Some authors have proposed that formation of the carbonic fluid inclusions and their predominance is due to post-trapping leakage of water from aqueous–carbonic inclusions (H₂O leakage model), whereas others have proposed that they reflect preferential trapping of the CO₂-dominated vapor in an immiscible aqueous–carbonic mixture (fluid unmixing model), or represent an unusually H₂O-poor, CO₂-dominated fluid (single carbonic fluid model). Based on the FIA analysis reported in this study, we argue that although post-trapping modifications and host mineral deformation may have altered the fluid inclusions in varying degrees, these processes were not solely responsible for the formation of the carbonic inclusions. The single carbonic fluid model best explains the extreme rarity of aqueous inclusions but lacks the support of experimental data that might indicate the viability of significant transport of silica and gold in a carbonic fluid. In contrast, the weakness of the unmixing model is that it lacks unequivocal petrographic evidence of phase separation. If the unmixing model were to be applied, the fluid prior to unmixing would have to be much more enriched in carbonic species and poorer in water than in most orogenic gold deposits in order to explain the predominance of carbonic inclusions. The H₂O-poor, CO₂-dominated fluid may have been the product of high-grade metamorphism or early degassing of magmatic intrusions, or could have resulted from the accumulation of vapor produced by phase separation external to the site of mineralization.Geological Survey of Canada contribution 2004383.     

Fluid inclusions in charnockites from the Bjerkreim-Sokndal massif (Rogaland,southwestern Norway): fluid origin and in situ evolution

Fluid inclusions and mineral associations were studied in late-stage charnockitic granites from the Bjerkreim-Sokndal lopolith (Rogaland anorthosite province). Because the magmatic and tectonic evolutions of this complex appear to be relatively simple, these rocks are a suitable case for investigation of the origin and evolution of granulitic fluids. Fluid inclusions, primarily contained in quartz, can be divided into four types: carbonic (type I), N₂-bearing (type II), CO₂+H₂O (type III) and aqueous inclusions (type IV). For each type, the role of leakage and fluid mixing are discussed from microthermometric and Raman spectrometric data. The most striking features of CO₂-rich inclusions (the predominant fluid) is the presence of graphite in numerous, trail-bound inclusions (Ib) and its absence in a few isolated, very dense (d=1.16), pure CO₂ inclusions (Ia) and in the late carbonic inclusions (Ic). Fluid chronology and mineral assemblages suggest that carbonic Ia inclusions represent the first fluid (pure CO₂) trapped at or close to magmatic conditions (T=780–830° C, fO₂=10^-15 atm and P=7.4±1 kb), outside the graphite stability field. In contrast, type Ib inclusions enclosed graphite particles from a channelized fluid during retrograde rock evolution (P=3–4 kb and T=600° C). Decreases in T-fO₂ could explain a progressive evolution from a CO₂-rich fluid to an H₂O-rich fluid in a closed C–O–H system. However, graphite destabilization observed in type Ic inclusions implies some late introduction of external water during the last stage of retrogression. The main results of this study are the following: (1) a carbonic fluid was present in an early stage of rock evolution (probably in the charnockitic magma) and (2) this granulite occurrence offers good evidence of crossing the graphite stability field during post-magmatic evolution.