Factors Affecting Differential Settlements of Framed Structures

The estimation of settlements, differential settlements and relative rotations on critical positions of the foundation is indispensable when carrying out analyses of both ultimate and serviceability limit states. The use of finite element method is recommended in cases where soil?Cstructure interaction is expected to be significant. The scope of this paper is a contribution to the investigation of general trends in the effects of main parameters on the interaction. A typical five-span frame building with varying rigidity was examined by using finite element numerical method under 2-D conditions. Soil below the foundation was simulated as linearly elastic or elastoplastic medium. The effects of superstructure and foundation rigidity are closely related to the effect of soil deformability thereby analyses were performed in terms of relative rigidity factors. The effects of specific foundation types, namely isolated footings, flexible and rigid mat, were investigated in detail. The conclusions were focused on the development of normalized differential settlements, on the influence of the relative rigidity factor as well as on the determination of those cases where the interaction approach is necessary to be used for the analysis.     

Three dimensional Finite Element modeling of seismic soil–structure interaction in soft soil

Earthquakes in regions underlain by soft clay have amply demonstrated the detrimental effects of soil–structure interaction (SSI) in such settings. This paper describes a new three dimensional Finite Element model utilizing linear elastic single degree of freedom (SDOF) structure and a nonlinear elasto-plastic constitutive model for soil behavior in order to capture the nonlinear foundation–soil coupled response under seismic loadings. Results from an experimental SSI centrifuge test were used to verify the reliability of the numerical model followed by parametric studies to evaluate performance of linear elastic structures underlain by soft saturated clay. The results of parametric study demonstrate that rigid slender (tall) structures are highly susceptible to the SSI effects including alteration of natural frequency, foundation rocking and excessive base shear demand. Structure–foundation stiffness and aspect ratios were found to be crucial parameters controlling coupled foundation–structure performance in flexible-base structures. Furthermore, frequency content of input motion, site response and structure must be taken into account to avoid occurrence of resonance problem.     

Discrete element method simulations of the seismic response of shallow foundations including soil‐foundation‐structure interaction

A novel three‐dimensional particle‐based technique utilizing the discrete element method is proposed to analyze the seismic response of soil‐foundation‐structure systems. The proposed approach is employed to investigate the response of a single‐degree‐of‐freedom structure on a square spread footing founded on a dry granular deposit. The soil is idealized as a collection of spherical particles using discrete element method. The spread footing is modeled as a rigid block composed of clumped particles, and its motion is described by the resultant forces and moments acting upon it. The structure is modeled as a column made of particles that are either clumped to idealize a rigid structure or bonded to simulate a flexible structure of prescribed stiffness. Analysis is done in a fully coupled scheme in time domain while taking into account the effects of soil nonlinear behavior, the possible separation between foundation base and soil caused by rocking, the possible sliding of the footing, and the dynamic soil‐foundation interaction as well as the dynamic characteristics of the superstructure. High fidelity computational simulations comprising about half a million particles were conducted to examine the ability of the proposed technique to model the response of soil‐foundation‐structure systems. The computational approach is able to capture essential dynamic response patterns. The cyclic moment–rotation relationships at the base center point of the footing showed degradation of rotational stiffness by increasing the level of strain. Permanent deformations under the foundation continued to accumulate with the increase in number of loading cycles. Copyright © 2011 John Wiley & Sons, Ltd.     

A stepwise damping‐solvent extraction method for large‐scale dynamic soil–structure interaction analysis in time domain

Time‐domain analysis of dynamic soil–structure interaction based on the substructure method plays an increasing role in practical applications as compared with the frequency‐domain analysis. Efficient and accurate modelling of the unbounded soil or rock medium has been a key issue in such an analysis. This paper presents a subregional stepwise damping‐solvent extraction formulation for solving large‐scale dynamic soil–structure problems in the time domain. Accuracy and efficiency of the formulation are evaluated in detail for a classical problem involving a rigid strip foundation embedded in a half‐space. A practical large‐scale soil–structure interaction problem, which represents a high concrete gravity dam subjected to seismic load, is then analysed using the proposed method. Various responses of the dam, including time histories of the crest displacement and acceleration and contours of the peak principal stresses within the dam body, are presented. Comparisons are also made between these results with those obtained using other models for the unbounded medium. Copyright © 2007 John Wiley & Sons, Ltd.     

Fully coupled solution for the consolidation of poroelastic soil around elastoplastic stone column

The paper presents a new fully coupled elastoplastic solution for the response of a poroelastic thick-walled soil cylinder around an elastoplastic stone column using Biot’s (J Appl Phys 12:155–164, 1941) consolidation theory. A unit cell concept is adopted for the soil–stone column analysis, and the problem is formulated in cylindrical coordinates. Expressions for excess pore pressure, stresses and displacements in the Laplace domain are derived analytically taking into account elastic or plastic behavior of the column. The inverse of the Laplace transform is evaluated numerically using an efficient scheme to obtain the final elastoplastic solution in time domain. The validity of the new solution has been checked against finite element solution and compared with some previously developed analytical methods for the stone column analysis. The results showing settlements, change in excess pore pressures and stresses with time are presented in terms of time factor. The proposed solution can be used to calculate transient state of settlements, distribution of deformations, stresses and excess pore pressures in soil and column under instantaneous or time-dependent monotonically increasing rigid vertical load.     

Three‐dimensional nonlinear finite element analysis of pile groups in saturated porous media using a new transmitting boundary

The dynamic behaviour of pile groups subjected to an earthquake base shaking is analysed. An analysis is formulated in the time domain and the effects of material nonlinearity of soil, pile–soil–pile kinematic interaction and the superstructure–foundation inertial interaction on seismic response are investigated. Prediction of response of pile group–soil system during a large earthquake requires consideration of various aspects such as the nonlinear and elasto‐plastic behaviour of soil, pore water pressure generation in soil, radiation of energy away from the pile, etc. A fully explicit dynamic finite element scheme is developed for saturated porous media, based on the extension of the original formulation by Biot having solid displacement (u) and relative fluid displacement (w) as primary variables (u–w formulation). All linear relative fluid acceleration terms are included in this formulation. A new three‐dimensional transmitting boundary that was developed in cartesian co‐ordinate system for dynamic response analysis of fluid‐saturated porous media is implemented to avoid wave reflections towards the structure. In contrast to traditional methods, this boundary is able to absorb surface waves as well as body waves. The pile–soil interaction problem is analysed and it is shown that the results from the fully coupled procedure, using the advanced transmitting boundary, compare reasonably well with centrifuge data. Copyright © 2007 John Wiley & Sons, Ltd.     

Cyclic macro‐element for soil–structure interaction: material and geometrical non‐linearities

This paper presents a non‐linear soil–structure interaction (SSI) macro‐element for shallow foundation on cohesive soil. The element describes the behaviour in the near field of the foundation under cyclic loading, reproducing the material non‐linearities of the soil under the foundation (yielding) as well as the geometrical non‐linearities (uplift) at the soil–structure interface. The overall behaviour in the soil and at the interface is reduced to its action on the foundation. The macro‐element consists of a non‐linear joint element, expressed in generalised variables, i.e. in forces applied to the foundation and in the corresponding displacements. Failure is described by the interaction diagram of the ultimate bearing capacity of the foundation under combined loads. Mechanisms of yielding and uplift are modelled through a global, coupled plasticity–uplift model. The cyclic model is dedicated to modelling the dynamic response of structures subjected to seismic action. Thus, it is especially suited to combined loading developed during this kind of motion. Comparisons of cyclic results obtained from the macro‐element and from a FE modelization are shown in order to demonstrate the relevance of the proposed model and its predictive ability. Copyright © 2001 John Wiley & Sons, Ltd.     

Robust partitioned block preconditioners for large‐scale geotechnical applications with soil–structure interactions

Soil–structure interaction problems are commonly encountered in geotechnical practice and remarkably characterized with significant material stiffness contrast. When solving the soil–structure interaction problems, the employed Krylov subspace iterative method may converge slowly or even fail, indicating that the adopted preconditioning method may not suit for such problems. The inexact block diagonal preconditioners proposed recently have been shown effective for the soil–structure interaction problems; however, they haven't been exploited to full capabilities. By using the same partition strategy according to the structure elements and soil elements, the partitioned block symmetric successive over‐relaxation preconditioners or partitioned block constraint preconditioners are proposed. Based on two pile‐group foundation problems and a tunnel problem, the proposed preconditioners are evaluated and compared with the available preconditioners for the consolidation analysis and the drained analysis, respectively. In spite of one additional solve associated with the structure block and multiplications with off‐diagonal blocks in the preconditioning step, numerical results reveal that the proposed preconditioners obviously possess better performance than the recently developed inexact block preconditioners. Copyright © 2013 John Wiley & Sons, Ltd.     

Semi‐analytical far field model for three‐dimensional finite‐element analysis

A challenging computational problem arises when a discrete structure (e.g. foundation) interacts with an unbounded medium (e.g. deep soil deposit), particularly if general loading conditions and non‐linear material behaviour is assumed. In this paper, a novel method for dealing with such a problem is formulated by combining conventional three‐dimensional finite‐elements with the recently developed scaled boundary finite‐element method. The scaled boundary finite‐element method is a semi‐analytical technique based on finite‐elements that obtains a symmetric stiffness matrix with respect to degrees of freedom on a discretized boundary. The method is particularly well suited to modelling unbounded domains as analytical solutions are found in a radial co‐ordinate direction, but, unlike the boundary‐element method, no complex fundamental solution is required. A technique for coupling the stiffness matrix of bounded three‐dimensional finite‐element domain with the stiffness matrix of the unbounded scaled boundary finite‐element domain, which uses a Fourier series to model the variation of displacement in the circumferential direction of the cylindrical co‐ordinate system, is described. The accuracy and computational efficiency of the new formulation is demonstrated through the linear elastic analysis of rigid circular and square footings. Copyright © 2004 John Wiley & Sons, Ltd.     

模袋固化土围埝地基排水固结过程的模拟分析

天津港南疆1号墩改造工程和北大防波堤西内堤一期围埝工程中,采用塑料排水板加固地基,成功的使用了水泥固化土模袋的施工工艺。把轴对称问题转换为平面应变问题进行分析,通过等效变换将排水板变换为连续的排水墙;同时考虑了模袋的加筋作用以及提高固化土凝聚力的作用,采用硬化模型模拟地基土体的固结过程。重点分析当地基中有排水板存在时,随上部逐级加荷,地基中心点沉降、加固区边缘的侧向变形以及中心点以下的孔隙水压力变化。分析结果与工程的实测数据吻合较好。     

A macro‐element for a circular foundation to simulate 3D soil–structure interaction

This paper presents a non‐linear interface element to compute soil–structure interaction (SSI) based on the macro‐element concept. The particularity of this approach lies in the fact that the foundation is supposed to be infinitely rigid and its movement is entirely described by a system of global variables (forces and displacements) defined in the foundation's centre. The non‐linear behaviour of the soil is reproduced using the classical theory of plasticity. Failure is described by the interaction diagram of the ultimate bearing capacity of the foundation under combined loads. The macro‐element is appropriate for modelling the cyclic or dynamic response of structures subjected to seismic action. More specifically, the element is able to simulate the behaviour of a circular rigid shallow foundation considering the plasticity of the soil under monotonic static or cyclic loading applied in three directions. It is implemented into FedeasLab, a finite element Matlab toolbox. Comparisons with experimental monotonic static and cyclic results show the good performance of the approach. Copyright © 2007 John Wiley & Sons, Ltd.     

The role of non-linear deformation analyses in the design of a reinforced soil berm at Red River U-frame lock No. 1

This paper describes a design application of non-linear deformation analysis to a complex soil–structure–foundation interaction problem through use of a finite element analysis. The problem consists of a proposed renovation to an existing soil-founded U-frame lock structure consisting of construction of a densely reinforced soil berm adjacent to an existing lock wall. Major questions facing the designer involve reduction of the earth pressure on the lock wall, layout of the reinforcing in the soil berm, and collateral effects of berm construction on the U-frame lock structure. A non-linear deformation analysis played a central role in addressing all of these questions. Berm construction and four operational load cases were used to understand the performance of the reinforced berm and to discern interactions among the lock, the backfill, the foundation strata of the U-frame lock, the reinforced berm, and the foundation strata of the reinforced berm. Insight gained from the soil–structure–foundation interaction analyses led to an alteration to the proposed reinforcement layout to enhance the performance of the reinforced soil berm.     

Vertical dynamic response of a rigid foundation embedded in a poroelastic soil layer

A simplified analytical method is presented for the vertical dynamic analysis of a rigid, massive, cylindrical foundation embedded in a poroelastic soil layer. The foundation is subjected to a time‐harmonic vertical loading and is perfectly bonded to the surrounding soil in the vertical direction. The soil underlying the foundation base is represented by a single‐layered poroelastic soil based on rigid bedrock while the soil at the side of the foundation is modeled as an independent poroelastic layer composed of a series of infinitesimally thin layers. The behavior of the soil is governed by Biot's poroelastodynamic theory and its governing equations are solved by the use of Hankel integral transform. The contact surface between the foundation base and the soil is smooth and fully permeable. The dynamic interaction problem is solved following standard numerical procedures. The accuracy of the present solution is verified by comparisons with the well‐known solutions obtained from other approaches for both the elastodynamic interaction problem and poroelastodynamic interaction problem. Numerical results for the vertical dynamic impedance and response factor of the foundation are presented to demonstrate the influence of nondimensional frequency of excitation, soil layer thickness, poroelastic material parameters, depth ratio and mass ratio on the dynamic response of a rigid foundation embedded in a poroelastic soil layer. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of the soil–pile–structure interaction in seismic analysis: case of liquefiable soils

The design of earthquake-resistant structures depends greatly on the soil–foundation–structure interaction. This interaction is more complex in the presence of liquefiable soils. Pile and rigid inclusion systems represent a useful practice to support structures in the presence of liquefiable soils in seismic zones. Both systems increase the bearing capacity of soil and allow reducing the settlements in the structure. Numerical models with a 3-storey reinforced concrete frame founded on inclusions systems (soil–inclusion–platform–structure) and pile systems (soil–pile–structure) were analyzed. Finite difference numerical models were developed using Flac 3D. Two different soil profiles were considered. A simple constitutive model for liquefaction analysis that relates the volumetric strain increment to the cyclic shear strain amplitude was utilized to represent the behavior of the sand, and the linear elastic perfectly plastic constitutive model with a Mohr–Coulomb failure criterion was used to represent the behavior of the earth platform. Two earthquakes were used to study the influence of the different frequency of excitation in the systems. The results were presented in terms of maximum shear forces distribution in the superstructure and spectrum response of each system. The efforts and displacements in the rigid elements (piles or rigid inclusions) were compared for the different systems. The bending and buckling failure modes of the pile were examined. The results show that the pile system, the soil profile and the frequency of excitation have a great influence on the magnitude and location of efforts and displacements in the rigid elements.

     

Assessment of soil–pile–structure interaction influencing seismic response of mid-rise buildings sitting on floating pile foundations

The role of the seismic soil–pile–structure interaction (SSPSI) is usually considered beneficial to the structural system under seismic loading since it lengthens the lateral fundamental period and leads to higher damping of the system in comparison with the fixed-base assumption. Lessons learned from recent earthquakes show that fixed-base assumption could be misleading, and neglecting the influence of SSPSI could lead to unsafe design particularly for structures founded on soft soils. In this study, in order to better understand the SSPSI phenomena, a series of shaking table tests have been conducted for three different cases, namely: (i) fixed-base structure representing the situation excluding the soil–structure interaction; (ii) structure supported by shallow foundation on soft soil; and (iii) structure supported by floating (frictional) pile foundation in soft soil. A laminar soil container has been designed and constructed to simulate the free field soil response by minimising boundary effects during shaking table tests. In addition, a fully nonlinear three dimensional numerical model employing FLAC3D has been adopted to perform time-history analysis on the mentioned three cases. The numerical model adopts hysteretic damping algorithm representing the variation of the shear modulus and damping ratio of the soil with the cyclic shear strain capturing the energy absorbing characteristics of the soil. Results are presented in terms of the structural response parameters most significant for the damage such as foundation rocking, base shear, floor deformation, and inter-storey drifts. Comparison of the numerical predictions and the experimental data shows a good agreement confirming the reliability of the numerical model. Both experimental and numerical results indicate that soil–structure interaction amplifies the lateral deflections and inter-storey drifts of the structures supported by floating pile foundations in comparison to the fixed base structures. However, the floating pile foundations contribute to the reduction in the lateral displacements in comparison to the shallow foundation case, due to the reduced rocking components.     

A density‐dependent elastoplastic hydro‐mechanical model for unsaturated compacted soils

This paper presents a three‐dimensional elastoplastic constitutive model for predicting the hydraulic and mechanical behaviour of unsaturated soils. It is based on experimental results obtained from a series of controlled‐suction triaxial tests on unsaturated compacted clay with different initial densities. Hydraulic hysteresis in the water‐retention behaviour is modelled as an elastoplastic process, with the elastic part modelled by a series of scanning curves and the elastoplastic part modelled by the main drying and wetting curves. The effect of void ratio on the water‐retention behaviour is studied using data obtained from controlled‐suction wetting–drying cyclic tests on unsaturated compacted clay with different initial densities. The effect of the degree of saturation on the stress–strain‐strength behaviour and the effect of void ratio on the water‐retention behaviour are considered in the model, as is the effect of suction on the hydraulic and mechanical behaviour. The initial density dependency of the compacted soil behaviour is modelled by experimental relationships between the initial density and the corresponding yield stress and, thereby, between the initial density and the normal compression line. The model is generalized to three‐dimensional stress states by assuming that the shapes of the failure and yield surfaces in the deviatoric stress plane are given by the Matsuoka–Nakai criterion. Model predictions of the stress–strain and water‐retention behaviour are compared with those obtained from triaxial tests with different initial densities under isotropic compression, triaxial compression and triaxial extension, with or without variation in suction. The comparisons indicate that the model accurately predicts the hydraulic and mechanical behaviour of unsaturated compacted soils with different initial densities using the same material constant. Copyright © 2006 John Wiley & Sons, Ltd.     

An efficient finite–discrete element method for quasi‐static nonlinear soil–structure interaction problems

An efficient finite–discrete element method applicable for the analysis of quasi‐static nonlinear soil–structure interaction problems involving large deformations in three‐dimensional space was presented in this paper. The present method differs from previous approaches in that the use of very fine mesh and small time steps was not needed to stabilize the calculation. The domain involving the large displacement was modeled using discrete elements, whereas the rest of the domain was modeled using finite elements. Forces acting on the discrete and finite elements were related by introducing interface elements at the boundary of the two domains. To improve the stability of the developed method, we used explicit time integration with different damping schemes applied to each domain to relax the system and to reach stability condition. With appropriate damping schemes, a relatively coarse finite element mesh can be used, resulting in significant savings in the computation time. The proposed algorithm was validated using three different benchmark problems, and the numerical results were compared with existing analytical and numerical solutions. The algorithm performance in solving practical soil–structure interaction problems was also investigated by simulating a large‐scale soft ground tunneling problem involving soil loss near an existing lining. Copyright © 2011 John Wiley & Sons, Ltd.     

Elastoplastic multiphase model for simulating the response of piled raft foundations subject to combined loadings

A multiphase model and corresponding computational time‐saving finite element code is proposed in this paper for predicting the settlements experienced by a piled raft foundation when subject to the combined action of vertical and lateral loadings. This model, which is formulated in the framework of an elastoplastic behaviour for the soil and the reinforcing piles as well, explicitly accounts for the shear and flexural behaviour of the latter. Starting from a simple analytical example where all the concepts attached to this model are clearly illustrated, the main stages leading to its finite element implementation are then presented. The numerical tool thus elaborated, is applied to the simulation of a pile‐reinforced strip foundation submitted to a horizontally applied seismic load in addition to a permanent vertical load. One of the key results of such a simulation in terms of design recommendation, lies in the conclusion that, while the shear and flexural contributions of the reinforcement play quite a negligible role in the case of a vertical load (as compared with their axial resistance), they remain absolutely essential for withstanding the seismic lateral loading. Copyright © 2006 John Wiley & Sons, Ltd.     

On the use of effective stress in three-dimensional hydro-mechanical coupled model

In the last decades, a number of hydro-mechanical elastoplastic constitutive models for unsaturated soils have been proposed. Those models couple the hydraulic and mechanical behaviour of unsaturated soils, and take into account the effects of the degree of saturation on the stress–strain behaviour and the effects of deformation on the soil–water characteristic response with a simple reversible part for the hysteresis. In addition, the influence of the suction on the stress–strain behaviour is considered. However, until now, few models predict the stress–strain and soil–water characteristic responses of unsaturated soils in a fully three-dimensional Finite Element code. This paper presents the predictions of an unsaturated soil model in a Three-dimensional Framework, and develops a study on the effect of partial saturation on the stability of shallow foundation resting on unsaturated silty soil. Qualitative predictions of the constitutive model show that incorporating a special formulation for the effective stress into an elastoplastic coupled hydro-mechanical model opens a full range of possibilities in modelling unsaturated soil behaviour.