From Grain to Floodplain: Evaluating heterogeneity of floodplain hydrostatigraphy using sedimentology,geophysics, and remote sensing

Stratigraphy is a fundamental component of floodplain heterogeneity and hydraulic conductivity and connectivity of alluvial aquifers, which affect hydrologic processes such as groundwater flow and hyporheic exchange. Watershed-scale hydrological models commonly simplify the sedimentology and stratigraphy of floodplains, neglecting natural floodplain heterogeneity and anisotropy. This study, conducted in the upper reach of the East River in the East River Basin, Colorado, USA, combines point-, meander-, and floodplain-scale data to determine key features of alluvial aquifers important for estimating hydrologic processes. We compare stratigraphy of two meanders with disparate geometries to explore floodplain heterogeneity and connectivity controls on flow and transport. Meander shape, orientation, and internal stratigraphy affected residence time estimates of laterally exchanged hyporheic water. Although the two meanders share a sediment source, vegetation, and climate, their divergent river migration histories resulted in contrasting meander hydrofacies. In turn, the extent and orientation of these elements controlled the effective hydraulic conductivity and, ultimately, estimates of groundwater transport and hyporheic residence times. Additionally, the meanders’ orientation relative to the valley gradient impacted the hydraulic gradient across the meanders—a key control of groundwater velocity. Lastly, we combine our field data with remotely sensed data and introduce a potential approach to estimate key hydrostratigraphic packages across floodplains. Prospective applications include contaminant transport studies, hyporheic models, and watershed models. © 2019 John Wiley & Sons, Ltd.     

Groundwater flow and implications for groundwater contamination north of Prewitt,New Mexico,U.S.A.

In the southern San Juan Basin, New Mexico, strata of Permian and younger age dip gently toward the center of the basin. Most previous investigators believed that recharge to these strata occurred by precipitation on the outcrops and groundwater flowed downdip to the north and northeast. Recent water-level measurements in an undeveloped part of the basin near Prewitt, New Mexico, show that groundwater at shallow depths in alluvium and bedrock flows southward, opposite to the dip direction, and toward a major ephemeral drainage in a strike valley. North of this area, groundwater in deep bedrock aquifers does appear to flow northward. This information suggests that there are two groundwater circulation patterns; a shallow one controlled by topography and a deeper one controlled by geologic structure.Significant amounts of recharge to sandstone aquifers by infiltration through outcrops is unlikely due to the near-vertical exposures on cliffs, the gentle dip of the strata, and small annual precipitation. Numerical model results suggest that recharge to bedrock aquifers may be from downward leakage via aquitards over large areas and leakage from narrow alluvial aquifers in the subcrop area. The recharge mechanism is controlled by the hydraulic conductivity of the strata.As the flow path is controlled by hydraulic conductivity contrasts, geologic structure, and topography, contamination movement from surface impoundments is likely to be difficult to predict without a thorough hydrogeological site investigation.     

Deduction of groundwater flow regime in a basaltic aquifer using geochemical and isotopic data: The Golan Heights, Israel case study

Groundwater flow-paths through shallow-perch and deep-regional basaltic aquifers at the Golan Heights, Israel, are reconstructed by using groundwater chemical and isotopic compositions. Groundwater chemical composition, which changes gradually along flow-paths due to mineral dissolution and water–rock interaction, is used to distinguish between shallow-perched and deep-regional aquifers. Groundwater replenishment areas of several springs are identified based on the regional depletion in rainwater δ¹⁸O values as a function of elevation (−0.25‰ per 100 m). Tritium concentrations assist in distinguishing between pre-bomb and post-bomb recharged rainwater.

It was found that waters emerging through the larger springs are lower in δ¹⁸O than surrounding meteoric water and poor in tritium; thus, they are inferred to originate in high-elevation regions up to 20 km away from their discharge points and at least several decades ago. These results verify the numerically simulated groundwater flow field proposed in a previous study, which considered the geological configuration, water mass balance and hydraulic head spatial distribution.     

Tidal effects on variations of fresh–saltwater interface and groundwater flow in a multilayered coastal aquifer on a volcanic island (Jeju Island, Korea)

We conducted various field studies at the seawater intrusion monitoring wells located in the eastern part of Jeju Island, Korea, to observe the tidal effect on groundwater–seawater flow in the coastal aquifer. Studies included monitoring the fluctuations of groundwater and tide levels, electrical and temperature logging, and 2-D heat-pulse flowmeter tests. According to time-series analysis, tidal effects on groundwater level reached up to 3 km inland from the coastline. Water-level variation was more sensitive to tidal fluctuations near the coast, and more related to rainfall toward inland areas. Temporal and spatial variations in the shape and location of the freshwater–saltwater interface were analyzed using data from nine monitoring wells. The results indicated that the interface toe is located at a distance of 6–8 km from the coastline and its location was related to geological layers present. Long-term seasonal variations revealed no major changes in the interface; minor variations were due to moving boundary conditions induced by tidal fluctuations. Using the two-dimensional heat-pulse flowmeter, groundwater flow directions and velocities at four tidal stages were measured on three monitoring wells drilled into the multilayered aquifers. This direct measurement enabled us to relate the differences of flow velocities and directions with geology and tidal fluctuations. Combining the results of EC logging and flowmeter tests, we found a zone where freshwater and saltwater moved alternately in opposite directions, as influenced by the tidal fluctuations. Integrating various physical logging and flowmeter data with water-level fluctuations improved our understanding of the behavior of fresh and seawater flow in the coastal aquifers.     

Groundwater discharge mechanism in semi‐arid regions and the role of evapotranspiration

The present study examined groundwater recharge/discharge mechanisms in the regional Central Sudan Rift Basins (CSRB). Aquifers in CSRB constitute poorly sorted silisiclastics of sand, clay and gravels deposited in closed hydrologic systems of the Cretaceous–Pleistocene fluviolacustrine environments. CSRB are bounded to the north by the highlands of the Central African Shear Zone (CAZS) that represents the surface and groundwater divides. Sporadic recharge in the peripheries of the basins along the CASZ occurs subsequent to decadal and centennial storm events. Inflow from the Nile into the aquifers represents an additional source of recharge. Thus, groundwater resources cannot be labelled fossil nor can they be readily recharged. Closed hydrologic troughs located adjacent to the influent Nile system mark areas of main groundwater discharge characterized by lower hydraulic heads. This study has examined mechanisms that derive the discharge of the groundwater in these closed basins and concluded that only evapotranspirative discharge can provide a plausible explanation. Groundwater abstraction is mainly through deep‐rooted trees and effective evaporation. The increase of TDS along the flow indicates local recharge at the peripheries of basins and shows the influence of evaporation and rock/water interaction. The decline in groundwater level along a flow path was calculated using Darcy's law to estimate average recharge and evapotranspirative discharge, which are equal under natural equilibrium and make the only fluxes in CSRB. Steady‐state 2D flow modelling has demonstrated that an average recharge of 4–8 mm yr^?1 and evapotranspirative discharge of 1–22 mm yr^?1 will maintain natural equilibrium in CSRB. Sporadic storms provide recharge in the highlands to preserve the current hydraulic gradient and maintain aquifer dynamics. Simulated recharge from the Nile totals about 17·5 mm yr^?1 and is therefore a significant contributor to the water balance. Copyright © 2007 John Wiley & Sons, Ltd.     

Hydrogeochemical and isotopic evidence of groundwater salinization in a coastal aquifer: a case study in Jeju volcanic island, Korea

In order to identify the origin of saline groundwater in the eastern part of Jeju volcanic island, Korea, a hydrogeochemical and isotopic study has been carried out for 18 observation wells located in east and southeast coastal regions. The total dissolved solid contents of groundwaters are highly variable (77–21,782 mg/l). Oxygen, hydrogen, sulfur, and strontium isotopic data clearly show that the saline water results from mixing of groundwater with seawater. Strontium isotopic compositions and Br/Cl and I/Cl ratios strongly suggest that the source of salinity is modern seawater intrusion. Hydrogeochemical characteristics based on bivariate diagrams of major and minor ions show that changes in the chemical composition of groundwater are mainly controlled by the salinization process followed by cation-exchange reactions. The highly permeable aquifers at the east coastal region are characterized by low hydraulic gradient and discharge rate and high hydraulic conductivity as compared with other regions. These properties enhance the salinization of groundwater observed in the study area. Based on the Cl, Br, and δ¹⁸O data, seawater was determined to have intruded inland some 2.5 km from the coastline. Considering the poor correlation of sampling depth and Cl concentrations observed, the position of seawater-freshwater interface is not uniformly distributed in the study area, due to heterogeneities of the basaltic aquifers.     

Investigating Groundwater Flow Between Edwards and Trinity Aquifers in Central Texas

Understanding the nature of communication between aquifers can be challenging when using traditional physical and geochemical groundwater sampling approaches. This study uses two multiport wells completed within Edwards and Trinity aquifers in central Texas to determine the degree of groundwater inter‐flow between adjacent aquifers. Potentiometric surfaces, hydraulic conductivities, and groundwater major ion concentrations and Sr isotope values were measured from multiple zones within three hydrostratigraphic units (Edwards and Upper and Middle Trinity aquifers). Physical and geochemical data from the multiport wells were combined with historical measurements of groundwater levels and geochemical compositions from the region to characterize groundwater flow and identify controls on the geochemical compositions of the Edwards and Trinity aquifers. Our results suggest that vertical groundwater flow between Edwards and Middle Trinity aquifers is likely limited by low permeability, evaporite‐rich units within the Upper and Middle Trinity. Potentiometric surface levels in both aquifers vary with changes in wet vs. dry conditions, indicating that recharge to both aquifers occurs through distinct recharge areas. Geochemical compositions in the Edwards, Upper, and Middle Trinity aquifers are distinct and likely reflect groundwater interaction with different lithologies (e.g., carbonates, evaporites, and siliceous sediments) as opposed to mixing of groundwater between the aquifers. These results have implications for the management of these aquifers as they indicate that, under current conditions, pumping of either aquifer will likely not induce vertical cross‐formational flow between the aquifers. Inter‐flow between the Trinity and the Edwards aquifers, however, should be reevaluated as pumping patterns and hydrogeologic conditions change.     

Simulating Groundwater-Streamflow Connections in the Upper Colorado River Basin

In mountain, snow driven catchments, snowmelt is supposed to be the primary contribution to river streamflows during spring. In these catchments the contribution of groundwater is not well documented because of the difficulty to monitor groundwater in such complex environment with deep aquifers. In this study we use an integrated hydrologic model to conduct numerical experiments that help quantify the effect of lateral groundwater flow on total annual and peak streamflow in predevelopment conditions. Our simulations focus on the Upper Colorado River Basin (UCRB; 2.8 × 10⁵ km²) a well-documented mountain catchment for which both streamflow and water table measurements are available for several important sub-basins. For the simulated water year, our results suggest an increase in peak flow of up to 57% when lateral groundwater flow processes are included—an unexpected result for flood conditions generally assumed independent of groundwater. Additionally, inclusion of lateral groundwater flow moderately improved the model match to observations. The correlation coefficient for mean annual flows improved from 0.84 for the no lateral groundwater flow simulation to 0.98 for the lateral groundwater flow one. Spatially we see more pronounced differences between lateral and no lateral groundwater flow cases in areas of the domain with steeper topography. We also found distinct differences in the magnitude and spatial distribution of streamflow changes with and without lateral groundwater flow between Upper Colorado River Sub-basins. A sensitivity test that scaled hydraulic conductivity over two orders of magnitude was conducted for the lateral groundwater flow simulations. These results show that the impact of lateral groundwater flow is as large or larger than an order of magnitude change in hydraulic conductivity. While our results focus on the UCRB, we feel that these simulations have relevance to other headwaters systems worldwide.     

Observations of particle movement in a monitoring well using the colloidal borescope

The colloidal borescope consists of a set of lenses and miniature video cameras capable of observing natural particles in monitoring wells. Based on field observations of these particles, it appears possible to measure in situ groundwater velocity in a well bore. Field observations have shown that directional measurements using the colloidal borescope are generally in good agreement with expected flow directions. However, the magnitude of flow velocity is higher compared with values based on conventional test methods. High relative flow velocities, even after correction factors have been applied to compensate for well bore effects, are believed to be due to preferential flow zones in the surrounding aquifer. Low flow zones exhibit swirling multidirectional flow that does not allow for a linear velocity measurement. Consequently, groundwater flow velocities measured by the colloidal borescope in heterogeneous aquifers will be biased toward the maximum velocity values present in the aquifer. A series of laboratory experiments was conducted to assess the reliability of the instrument. Based on this work, a seepage velocity correction factor ( ) of 1–4 was found for quantifying groundwater seepage velocity in the adjacent aquifer from observations in a well bore. Laboratory measurements also indicate that preferential flow in the surrounding aquifer dominates flow in the well. Results of this work suggest the possibility of quantifying higher-flow velocities associated with preferential flow zones in the subsurface.     

Groundwater occurrence and flow pattern in the Enugu coal-mine area,Anambra State,Nigeria

Abstract

The distribution of major geological units, static water level data, water chemistry data, and observations of surface features influenced by groundwater seepage were used to ascertain the nature of groundwater occurrence and flow pattern in the Enugu coal field, Nigeria. Considerations of the geological units, the static groundwater levels and groundwater seepages in the mines indicate that the coal sequence is a multiaquifer system in which sandstone and coal aquifers alternate with shale aquitards. Based on the hydraulic head data, the groundwater flow is predominantly downwards. Groundwater velocity calculation across the multiaquifer system using the Darcy equation gave a flow velocity of about 1 m day^?1. For groundwater systems, such a calculated velocity is considered high. The high velocity is most probably due to the high fracture porosity as well as the presence of other stratigraphic and structural features such as alluvial fills that provide high hydraulic conductivity pathways across the aquifer system. The pattern of groundwater inflow into the mines is also influenced by these stratigraphie and structural features.     

Estimation of the inland extending length of the freshwater–saltwater interface in coastal unconfined aquifers

ABSTRACT

The inland extending length of the freshwater–saltwater interface toe is useful in studies of seawater intrusion in coastal areas. The submarine fresh groundwater discharge in coastal zones is affected not only by hydraulic conductivity and hydraulic gradient of the aquifer, but also by the position of the interface. Two observation wells at different distances from the coast are required to calculate the fresh groundwater flow rate in coastal unconfined aquifers. By considering that the submarine groundwater discharge is equal to the groundwater flow rate, the length of the interface toe extending inland can be estimated when the groundwater flow is at a steady-flow state. Aquifers with horizontal and sloping confined beds and without/with unique surface vertical infiltration are considered. Examples used to illustrate the application of these methods indicate that the inland extending lengths of the interface toe in aquifers with vertical surface infiltration are much shorter than those in aquifers without vertical surface infiltration, and the length of the interface in aquifers with a horizontal confining lower bed are smaller than those in aquifers with a confining lower bed sloping towards the sea. The extent of the interface on the northwestern coast near the city of Beihai in southern Guangxi, China, on 18 January 2013 was estimated as 471–478 m.

Editor M.C. Acreman Associate editor not assigned     

Distinguishing Mountain Front and Mountain Block Recharge in an Intermontane Basin of the Himalayan Region

Intermontane basin aquifers worldwide, particularly in the Himalayan region, are recharged largely by the adjoining mountains. Recharge in these basins can occur either by water infiltrating from streams near mountain fronts (MFs) as mountain front recharge (MFR) or by sub-surface mountain block infiltration as mountain block recharge (MBR). MFR and MBR recharge are challenging to distinguish and are least quantified, considering the lack of extensive understanding of the hydrological processes in the mountains. This study used oxygen and hydrogen isotopes (δ¹⁸O and δ²H), electrical conductivity (EC) data, hydraulic head, and groundwater level data to differentiate MFR and MBR. Groundwater level data provide information about the groundwater-surface water interactions and groundwater flow directions, whereas isotopes and EC data are used to distinguish and quantify different recharge sources. The present methodology is tested in an intermontane basin of the Himalayan region. The results suggest that karst springs (KS) and deep groundwater (DGW) recharge are dominated by snowmelt (47% ± 10% and 46% ± 9%) as MBR from adjacent mountains, insignificantly affected by evaporation. The hydraulic head data and isotopes indicate Quaternary shallow groundwater (SGW) aquifer system recharge as MFR of local meteoric water with significant evaporation. The results indicate several flow paths in the aquifer system, a local flow for KS, intermediate flow for SGW, and regional flow for DGW. The findings will significantly impact water resource management in the area and provide vital baseline knowledge for sustainable groundwater management in other Himalayan intermontane basins.     

Analytical solutions for flow to a well through a fault

We present explicit analytical solutions to problems of steady groundwater flow to a pumping well in an aquifer divided by an infinite, linear fault. The transmissivity of the aquifer is allowed to jump from one side of the fault to the other to model the juxtaposition of host rocks with different hydrologic properties caused by faulting. The fault itself is represented as a thin anisotropic inhomogeneity; this allows the fault to act as a combined conduit–barrier to groundwater flow, as is commonly described in the literature. We show that the properties of the fault may be represented exactly by two lumped parameters—fault resistance and fault conductance—and that the effects of the fault on flow in the adjacent aquifer is independent of the fault width. We consider the limiting cases of a purely leaky and a purely conductive fault where the fault domain may be replaced exactly by internal boundary conditions, and we investigate the effects of fault properties on the flow behavior in the adjacent aquifers. We demonstrate that inferring fault properties based on field observations of head in the aquifer is inherently difficult, even when the fault may be described by one of the two limiting cases. In particular, the effects of a leaky fault and a conductive fault on heads and discharges in the aquifer opposite the fault from the well, are shown to be identical in some cases.     

Groundwater-supported evapotranspiration within glaciated watersheds under conditions of climate change

This paper analyzes the effects of geology and geomorphology on surface-water/-groundwater interactions, evapotranspiration, and recharge under conditions of long-term climatic change. Our analysis uses hydrologic data from the glaciated Crow Wing watershed in central Minnesota, USA, combined with a hydrologic model of transient coupled unsaturated/saturated flow (HYDRAT2D). Analysis of historical water-table (1970–1993) and lake-level (1924–2002) records indicates that larger amplitude and longer period fluctuations occur within the upland portions of watersheds due to the response of the aquifer system to relatively short-term climatic fluctuations. Under drought conditions, lake and water-table levels fell by as much as 2–4 m in the uplands but by 1 m in the lowlands. The same pattern can be seen on millennial time scales. Analysis of Holocene lake-core records indicates that Moody Lake, located near the outlet of the Crow Wing watershed, fell by as much as 4 m between about 4400 and 7000 yr BP. During the same time, water levels in Lake Mina, located near the upland watershed divide, fell by about 15 m. Reconstructed Holocene climate as represented by HYDRAT2D gives somewhat larger drops (6 and 24 m for Moody Lake and Lake Mina, respectively). The discrepancy is probably due to the effect of three-dimensional flow. A sensitivity analysis was also carried out to study how aquifer hydraulic conductivity and land-surface topography can influence water-table fluctuations, wetlands formation, and evapotranspiration. The models were run by recycling a wet year (1985, 87 cm annual precipitation) over a 10-year period followed by 20 years of drier and warmer climate (1976, 38 cm precipitation). Model results indicated that groundwater-supported evapotranspiration accounted for as much as 12% (10 cm) of evapotranspiration. The aquifers of highest hydraulic conductivity had the least amount of groundwater-supported evapotranspiration owing to a deep water table. Recharge was even more sensitive to aquifer hydraulic conductivity, especially in the lowland regions. These findings have important implications for paleoclimatic studies, because the hydrologic response of a surface-water body will vary across the watershed to a given climate signal.     

Geological structure of hydrothermal fields in the taupo volcanic zone,New Zealand

Wairakei hydrothermal field is underlain by an acid volcanic sequence consisting of the following units: Recent pumice cover, Wairakei Breccia, Huka Falls Formation, Haparangi Rhyolite, Waiora Formation, Waiora Valley Andesite, Wairakei Ignimbrites, Ohakuri Group. The stratified volcanic sequence is draped over a basement horst and thickens eastward and westward into adjoining volcanotectonic depressions. These major depressions have grown progressively during the Quaternary by differential subsidence along active faults and were not the direct result of collapse following major ignimbrite and rhyolite eruptions. The bulk of the steam production is obtained from a thick aquifer of pumice breccias (Waiora aquifer), which is capped by lacustrine shales of the Huka Falls Formation. The best production is obtained from fault zones intersecting the lower part of this aquifer. The Ohakuri Group, underlying the Wairakei Ignimbrites, constitutes a lower, pumice breccia aquifer, not yet directly exploited by drill-holes. Hydrothermal water at 265°C is fed from the lower to the upper aquifer through linear fissures in the Wairakei Ignimbrites, principally at the cress of a small structural dome. These fissures are related to active, north-east striking, normal faults, having a small dextral transcurrent component. Major zones of heat liberation have been localised at the intersection of secondary, north-west cross faults. Fossil, hydrothermal, mud-flow, conglomerates intercalated in the mid-Pleistocene Huka Falls Formation, suggest that hydrothermal activity at Wairakei is at least 500,000 years old. Isopachs on the early Pleistocene Waiora Valley Andesite indicate that the andesite plug and associated flows were crupted at the same fault intersections, now controlling heat flow into the Waiora aquifer. The inferred great age of the hydrothermal system poses problems in maintaining heat flow, and a model of a large, semi-permanent granitic batholith leaking super-critical hydrothermal fluids up active fault zones to heat near-surface aquifers of meteoric water is proposed. Temperature and pressure equilibria of such a magma body may be maintained by gaseous diffusion. Structural and heat flow evidence suggest that the most probable location of the magma body is to the south of the hydrothermal field below a large, late Pleistocene, rhyolitic eruptive centre. Other hydrothermal fields in the Taupo Volcanic Zone — Orakeikorako, Waiotapu and Kawerau — have similar geological sequences and structures to Wairakei. Important features in common include:

1. 1)
   Proximity to a late Pleistocene, rhyolitic eruptive centre typified by ignimbrites, non-welded ash flows and rhyolite domes and sills, which is considered to directly overlie a large, semipermanent magma chamber.     
   
   

Tracing groundwater flow in the Borden aquifer using krypton-85

Krypton-85 was measured in air, soil gas, and ground water at the Borden aquifer in Ontario in October 1989. The measured specific activities in air and soil gas were 52.0 ± 2.0 and 53.6 ± 1.8 disintegrations per min (dpm) cm⁻³ krypton. These measurements are in excellent agreement with the global atmospheric trend and demonstrate that krypton-85 enters the water table at the Borden site without a lag in the soil gas reservoir. The krypton-85 specific activity in five groundwater samples ranged from 44.9 to 9.5 dpm cm⁻³ corresponding to groundwater ages of 2–17 years with a monotonic decrease in specific activity (increase in age) along the groundwater flow path. Travel times calculated from a two-dimensional steady-state model of groundwater flow agree well with the krypton-85 ages in the main recharge region of the aquifer where flow is predominantly vertical, but were 30–40% older than the krypton-85 age downstream of the main recharge area where the flow is mainly horizontal. The effect of dispersion on the distribution of krypton-85 was determined by modelling the transport of krypton-85 in the Borden aquifer with a two-dimensional time-dependent advection dispersion model using the steady-state flow field. Agreement between model specific activity and observed specific activity was excellent for samples in the main recharge region, but the model specific activities were 30–50% lower than observed specific activities in the region of horizontal flow. The differences in travel times and krypton-85 ages and in model krypton-85 and observed krypton-85 specific activities are considered to be small given the heterogeneities that exist in the hydraulic conductivity and aquifer geometry and hence in the groundwater flow field. The model simulated krypton-85 distribution was not sensitive to changes in longitudinal dispersivity and was only weakly sensitive to changes in transverse dispersivity. The geochemical inertness, well-defined source function, and insensitivity to dispersion of krypton-85 allow estimates of groundwater age to be made in a straightforward manner and measurement of krypton-85 can significantly enhance the characterization of groundwater flow in many shallow subsurface systems.     

The impact of highly permeable layer on hydraulic system in a coastal aquifer

This study is aimed to understand the hydraulic mechanism of coastal aquifer systems that include highly permeable layers (HPLs). These hydrologic conditions can be found in many volcanic islands that are composed of a series of lava flows discharged into sea or other standing body of water. In the first part, we developed a numerical model based on the geologic and hydrologic data obtained from the eastern Jeju Island, Korea, of which the aquifer contains clinker and hyaloclastite layers. The simulation results reproduced spatial location of fresh‐saline water interface, especially the abrupt decline of interface at the inland part and the thickness variation of transition zone along the cross‐section observed at the eastern Jeju coastal aquifer. We were able to find out that these phenomena are strongly related to the presence of the HPL. In the second part, quantitative analyses were conducted with the use of hypothetical models in order to understand the dynamic characteristics of coastal system that includes HPLs. A series of sensitivity studies were conducted to assess the effect of the horizontal length and vertical depth of HPL on the spatial location of the interface toe and the configuration of transition zone. Various case studies have shown that the seawater intruded into the inland more as the horizontal length of HPL was increased and its vertical depth was decreased. In other simulations including two HPLs, the vertical distance between these two HPLs primarily controlled the flow regime, flux variations, and the configuration of the transition zone. Finally, we performed simulations to evaluate the effect of a rising sea‐level. This study provides more understanding of how the presence of HPL controls the seawater intrusion processes, and the spatial configurations of fresh‐saline water interface at coastal aquifers. Copyright © 2012 John Wiley & Sons, Ltd.     

Performance Assessments of a Novel Well Design for Reducing Exposure to Bedrock‐Derived Arsenic

Arsenic in groundwater is a serious problem in New England, particularly for domestic well owners drawing water from bedrock aquifers. The overlying glacial aquifer generally has waters with low arsenic concentrations but is less used because of frequent loss of well water during dry periods and the vulnerability to surface‐sourced bacterial contamination. An alternative, novel design for shallow wells in glacial aquifers is intended to draw water primarily from unconsolidated glacial deposits, while being resistant to drought conditions and surface contamination. Its use could greatly reduce exposure to arsenic through drinking water for domestic use. Hypothetical numerical models were used to investigate the potential hydraulic performance of the new well design in reducing arsenic exposure. The aquifer system was divided into two parts, an upper section representing the glacial sediments and a lower section representing the bedrock. The location of the well, recharge conditions, and hydraulic properties were systematically varied in a series of simulations and the potential for arsenic contamination was quantified by analyzing groundwater flow paths to the well. The greatest risk of arsenic contamination occurred when the hydraulic conductivity of the bedrock aquifer was high, or where there was upward flow from the bedrock aquifer because of the position of the well in the flow system.     

Forensic isotope analysis to refine a hydrologic conceptual model

Water resources in the arid southwestern United States are frequently the subject of conflict from competing private and public interests. Legal remedies may remove impasses, but the technical analysis of the problem often determines the future success of legal solutions. In Owens Valley, California, the source of water for the Los Angeles Aqueduct (LAA) is flow diverted from the Owens River and its tributaries and ground water from valley aquifers. Future management of ground water delivered to the LAA needs technical support regarding quantity available, interconnection of shallow and confined aquifers, impact on local springs, and rate of recharge. Ground water flow models and ground water composition are tools already in use, but these have large uncertainty for local interpretations. This study conducted targeted sampling of springs and wells to evaluate the hydrologic system to corroborate conceptual and numerical models. The effort included measurement of intrinsic isotopic composition at key locations in the aquifers. The stable isotopic data of boron (delta(11)B), sulfur (delta(34)S), oxygen (delta(18)O), hydrogen (delta D), and tritium ((3)H) supported by basic chemical data provided rules for characterizing the upper and the lower aquifer system, confirmed the interpretation of ground water flow near faults and flow barriers, and detected hydraulic connections between the LAA and the perennial springs at key locations along the unlined reach of the LAA. This study exemplifies the use of forensic isotopic approaches as independent checks on the consistency of interpretations of conceptual models of a ground water system and the numerical hydrologic simulations.     

Boundary depletion rate and drawdown in leaky wedge‐shaped aquifers

This study presents analytical solutions of the three‐dimensional groundwater flow to a well in leaky confined and leaky water table wedge‐shaped aquifers. Leaky wedge‐shaped aquifers with and without storage in the aquitard are considered, and both transient and steady‐state drawdown solutions are derived. Unlike the previous solutions of the wedge‐shaped aquifers, the leakages from aquitard are considered in these solutions and unlike similar previous work for leaky aquifers, leakage from aquitards and from the water table are treated as the lower and upper boundary conditions. A special form of finite Fourier transforms is used to transform the z‐coordinate in deriving the solutions. The leakage induced by a partially penetrating pumping well in a wedge‐shaped aquifer depends on aquitard hydraulic parameters, the wedge‐shaped aquifer parameters, as well as the pumping well parameters. We calculate lateral boundary dimensionless flux at a representative line and investigate its sensitivity to the aquitard hydraulic parameters. We also investigate the effects of wedge angle, partial penetration, screen location and piezometer location on the steady‐state dimensionless drawdown for different leakage parameters. Results of our study are presented in the form of dimensionless flux‐dimensionless time and dimensionless drawdown‐leakage parameter type curves. The results are useful for evaluating the relative role of lateral wedge boundaries and leakage source on flow in wedge‐shaped aquifers. This is very useful for water management problems and for assessing groundwater pollution. The presented analytical solutions can also be used in parameter identification and in calculating stream depletion rate and volume. Copyright © 2011 John Wiley & Sons, Ltd.