共查询到20条相似文献,搜索用时 515 毫秒
1.
H.-J. Kuempel R. K. Chadha D. V. Ramana M. Ravi 《Journal of the Geological Society of India》2017,90(6):678-683
The filling of the Koyna reservoir in western India and the associated triggered earthquakes have been well documented. Several studies have suggested that earthquakes are triggered on pre-existing faults in the region due to changes in pore pressure caused by pore pressure diffusion. To study in-situ pore pressure variations twenty-one borewells were drilled in the Koyna-Warna region under an Indo-German research program during 1995–1998. In most of these wells tidal signals are observed in well level variations indicating sensitivity to small strain changes in hydraulically connected, confined aquifers. Those signals, hence, are suitable to reflect variations in the stress field of local rock formations. More than a decade of well level monitoring has shown four types of earthquake related changes. The pre- and post-earthquake changes are mostly interpretative in nature and difficult to substantiate. The co-seismic and transient changes which are observed for local and large teleseismic events are well established. Wells connected to unconfined aquifers also showed changes related to seismicity in case of large magnitude earthquakes at closer distances. Some anomalous water level fluctuations are seen which are not associated with local or teleseismic earthquakes. These changes are coherent in nature and reflect aseismic regional volume strain. 相似文献
2.
Upper-mantle velocity structure of the lower Great Lakes region 总被引:1,自引:0,他引:1
The lithospheric root beneath North America contains a prominent indentation beneath the lower Great Lakes region that is approximately aligned with the track of the New England seamounts. By combining data from the recently installed POLARIS network in southern Ontario, Canada with data acquired in 1996 during the Abitibi–Grenville teleseismic experiment, we have performed a tomographic inversion using 4543 P-wave traveltimes from 213 events (5.0 ≤ mb ≤ 6.6), and 1860 S-wave traveltimes from 98 events (5.0 ≤ mb ≤ 6.6), to obtain high-resolution images of the upper mantle beneath the lower Great Lakes. Two salient features of the 3-D models are: 1) a patchy, NNW-trending low-velocity region, and 2) a linear, NE-striking high-velocity anomaly. S-wave images show that the low-velocity anomaly changes from an arcuate feature at 400-km depth, to a NW-striking linear feature at 100-km depth beneath the Neoproterozoic Ottawa–Bonnechere graben. The linear high-velocity anomaly extends to at least 300-km depth and strikes parallel to surface geological belts and the Laurentian continental margin. We interpret the high-velocity anomaly as a possible relict slab associated with ca. 1.35–1.3 Ga subduction beneath the Composite Arc Belt, whereas the low-velocity anomaly is interpreted as a zone of alteration and metasomatism associated with the ascent of magmas that produced the Late Cretaceous Monteregian plutons. Our data support an interpretation of these plutons as melts generated by the passage of North America across a mantle plume, rather than a far-field response to opening of the North Atlantic. 相似文献
3.
A. Kotsarenko R. Prez Enríquez J.A. Lpez Cruz-Abeyro S. Koshevaya V. Grimalsky V. Yutsis I. Kremenetsky 《Tectonophysics》2007,431(1-4):249
The analysis of ULF geomagnetic field measured at Teoloyucan station (Central Mexico, 11′35.735″ W, 19 44′45.100″ N, 2280 m height) is presented in an intermediate (± 15 days) and short time scale (the day of the EQ occurrence) in relation to 7 major earthquakes occurred in Mexico in 1999–2001. Local changes in the fractal dynamics of the magnetic field are found to be important: a pronounced fall of the fractal index is frequently observed prior to the main shock. The study of the ULF resonant structure recently discovered in the frequencies fR1 = 10.2−11.1 mHz and fR2 = 13.6−14.5 mHz reveals changes in their character probably related to the processes of the earthquakes preparation. The success of the observation of the mentioned anomalies (specially the fractal index decrease) strongly depends on how close is the station from the epicenter, and what is the magnitude of the earthquake. 相似文献
4.
The Great Lisbon earthquake has the largest documented felt area of any shallow earthquake and an estimated magnitude of 8.5–9.0. The associated tsunami ravaged the coast of SW Portugal and the Gulf of Cadiz, with run-up heights reported to have reached 5–15 m. While several source regions offshore SW Portugal have been proposed (e.g.— Gorringe Bank, Marquis de Pombal fault), no single source appears to be able to account for the great seismic moment as well as all the historical tsunami amplitude and travel time observations. A shallow east dipping fault plane beneath the Gulf of Cadiz associated with active subduction beneath Gibraltar, represents a candidate source for the Lisbon earthquake of 1755.Here we consider the fault parameters implied by this hypothesis, with respect to total slip, seismic moment, and recurrence interval to test the viability of this source. The geometry of the seismogenic zone is obtained from deep crustal studies and can be represented by an east dipping fault plane with mean dimensions of 180 km (N–S) × 210 km (E–W). For 10 m of co-seismic slip an Mw 8.64 event results and for 20 m of slip an Mw 8.8 earthquake is generated. Thus, for convergence rates of about 1 cm/yr, an event of this magnitude could occur every 1000–2000 years. Available kinematic and sedimentological data are in general agreement with such a recurrence interval. Tsunami wave form modeling indicates a subduction source in the Gulf of Cadiz can partly satisfy the historical observations with respect to wave amplitudes and arrival times, though discrepancies remain for some stations. A macroseismic analysis is performed using site effect functions calculated from isoseismals observed during instrumentally recorded strong earthquakes in the region (M7.9 1969 and M6.8 1964). The resulting synthetic isoseismals for the 1755 event suggest a subduction source, possibly in combination with an additional source at the NW corner of the Gulf of Cadiz can satisfactorily explain the historically observed seismic intensities. Further studies are needed to sample the turbidites in the adjacent abyssal plains to better document the source region and more precisely calibrate the chronology of great earthquakes in this region. 相似文献
5.
Several source parameters (source dimensions, slip, particle velocity, static and dynamic stress drop) are determined for the moderate-size October 27th, 2004 (MW = 5.8), and the large August 30th, 1986 (MW = 7.1) and March 4th, 1977 (MW = 7.4) Vrancea (Romania) intermediate-depth earthquakes. For this purpose, the empirical Green's functions method of Irikura [e.g. Irikura, K. (1983). Semi-Empirical Estimation of Strong Ground Motions during Large Earthquakes. Bull. Dis. Prev. Res. Inst., Kyoto Univ., 33, Part 2, No. 298, 63–104., Irikura, K. (1986). Prediction of strong acceleration motions using empirical Green's function, in Proceedings of the 7th Japan earthquake engineering symposium, 151–156., Irikura, K. (1999). Techniques for the simulation of strong ground motion and deterministic seismic hazard analysis, in Proceedings of the advanced study course seismotectonic and microzonation techniques in earthquake engineering: integrated training in earthquake risk reduction practices, Kefallinia, 453–554.] is used to generate synthetic time series from recordings of smaller events (with 4 ≤ MW ≤ 5) in order to estimate several parameters characterizing the so-called strong motion generation area, which is defined as an extended area with homogeneous slip and rise time and, for crustal earthquakes, corresponds to an asperity of about 100 bar stress release [Miyake, H., T. Iwata and K. Irikura (2003). Source characterization for broadband ground-motion simulation: Kinematic heterogeneous source model and strong motion generation area. Bull. Seism. Soc. Am., 93, 2531–2545.] The parameters are obtained by acceleration envelope and displacement waveform inversion for the 2004 and 1986 events and MSK intensity pattern inversion for the 1977 event using a genetic algorithm. The strong motion recordings of the analyzed Vrancea earthquakes as well as the MSK intensity pattern of the 1977 earthquake can be well reproduced using relatively small strong motion generation areas, which corresponds to small asperities with high stress drops (300–1200 bar) and high particle velocities (3–5 m/s). These results imply a very efficient high-frequency radiation, which has to be taken into account for strong ground motion prediction, and indicate that the intermediate-depth Vrancea earthquakes are inherently different from crustal events. 相似文献
6.
During May 2003 a swarm of 16 earthquakes (ML = 0.6–2.1) occurred at Anjalankoski, south-eastern Finland. The activity lasted for three weeks, but additional two events were observed at the same location in October 2004. A comparison of the waveforms indicated that the source mechanisms and the hypocentres of the events were nearly identical.A relative earthquake location method was applied to better define the geometry of the cluster and to identify the fault plane associated with the earthquakes. The relocated earthquakes aligned along an ENE–WSW trending zone, with a lateral extent of about 1.0 km by 0.8 km. The relative location and the waveform-modelling of depth sensitive surface wave (Rg) and S-to-P converted body wave (sP) phases indicated that the events were unusually shallow, most likely occurring within the first 2 km of the surface. The revised historical earthquake data confirm that shallow swarm-type seismicity is characteristic to the area.The focal mechanism obtained as a composite solution of the five strongest events corresponds to dip-slip motion along a nearly vertical fault plane (strike = 250°, dip = 80°, rake = 90°). The dip and strike of this nodal plane as well as the relocated hypocentres coincide with an internal intrusion boundary of the Vyborg rapakivi batholith.The events occur under a compressive local stress field, which is explained by large gravitational potential energy differences and ridge-push forces. Pore-pressure changes caused by intrusion of ground water and/or radon gas into the fracture zones are suggested to govern the swarm-type earthquake activity. 相似文献
7.
Oxana V. Lunina Andrei S. Gladkov Igor S. Novikov Anna R. Agatova Evgenii M. Vysotskii Alexei A. Emanov 《Tectonophysics》2008,453(1-4):276
The co-seismic deformations produced during the September 27, 2003 Chuya earthquake (Ms = 7.5) that affected the Gorny Altai, Russia, are described and discussed along a 30 km long segment. The co-seismic deformations have manifested themselves both in unconsolidated sediments as R- and R′-shears, extension fractures and contraction structures, and in bedrock as the reactivation of preexisting schistosity zones and individual fractures, as well as development of new ruptures and coarse crushing zones. It has been established that the pattern of earthquake ruptures represents a typical fault zone trending NW–SE with a width reaching 4–5 km and a dextral strike–slip kinematics. The initial stress field that produced the whole structural pattern of co-seismic deformations during the Chuya earthquake, is associated with a transcurrent regime with a NNW–SSE, almost N–S, trending of compressional stress axis (σ1), and a ENE–WSW, almost E–W, trending of tensional stress axis (σ3). The state of stress in the newly-formed fault zone is relatively uniform. The local stress variations are expressed in insignificant deviation of σ1 from N–S to NW–SE or NE–SW, in short-term fluctuations of relative stress values in keeping their spatial orientations, or in a local increase of the plunge angle of the σ1. The geometry of the fault zone associated with the Chuya earthquake has been compared with the mechanical model of fracturing in large continental fault zones with dextral strike–slip kinematics. It is apparent that the observed fracture pattern corresponds to the late disjunctive stage of faulting when the master fault is not fully developed but its segments are already clearly defined. It has been shown that fracturing in widely different rocks follows the common laws of the deformation of solid bodies, even close to the Earth surface, and with high rates of movements. 相似文献
8.
Integration of on-land and offshore geomorphological and structural investigations coupled to extensive radiometric dating of co-seismically uplifted Holocene beaches allows characterization of the geometry, kinematics and seismotectonics of the Scilla Fault, which borders the eastern side of the Messina Strait in Calabria, Southern Italy. This region has been struck by destructive historical earthquakes, but knowledge of geologically-based source parameters for active faults is relatively poor, particularly for those running mostly offshore, as the Scilla Fault does. The 30 km-long normal fault may be divided into three segments of 10 km individual length, with the central and southern segments split in at least two strands. The central and northern segments are submerged, and in this area marine geophysical data indicate a youthful morphology and locally evidence for active faulting. The on-land strand of the western segment displaces marine terraces of the last interglacial (124 to 83 ka), but seismic reflection profiles suggest a full Quaternary activity. Structural data collected on bedrock faults exposed along the on-land segment provide evidence for normal slip and NW-SE extension, which is consistent with focal mechanisms of large earthquakes and GPS velocity fields in the region. Detailed mapping of raised Holocene marine deposits exposed at the coastline straddling of the northern and central segments supplies evidence for two co-seismic displacements at 1.9 and 3.5 ka, and a possible previous event at 5 ka. Co-seismic displacements show a consistent site value and pattern of along-strike variation, suggestive of characteristic-type behaviour for the fault. The 1.5–2.0 m average co-seismic slips during these events document Me 6.9–7.0 earthquakes with 1.6–1.7 ka recurrence time. Because hanging-wall subsidence cannot be included into slip magnitude computation, these slips reflect footwall uplift, and represent minimum average estimates. The palaeoseismological record based on the palaeo-shorelines suggests that the last rupture on the Scilla Fault during the February 6, 1783 Mw = 5.9–6.3 earthquake was at the expected time but it may have not entirely released the loaded stress since the last great event at 1.9 ka. Comparison of the estimated co-seismic extension rate based on the Holocene shoreline record with available GPS velocities indicates that the Scilla Fault accounts for at least 15–20% of the contemporary geodetic extension across the Messina Strait. 相似文献
9.
Seismicity, deformation and seismic hazard in the western rift of Corinth: New insights from the Corinth Rift Laboratory (CRL) 总被引:1,自引:2,他引:1
P. Bernard H. Lyon-Caen P. Briole A. Deschamps F. Boudin K. Makropoulos P. Papadimitriou F. Lemeille G. Patau H. Billiris D. Paradissis K. Papazissi H. Castarde O. Charade A. Nercessian A. Avallone F. Pacchiani J. Zahradnik S. Sacks A. Linde 《Tectonophysics》2006,426(1-2):7
This paper presents the main recent results obtained by the seismological and geophysical monitoring arrays in operation in the rift of Corinth, Greece. The Corinth Rift Laboratory (CRL) is set up near the western end of the rift, where instrumental seismicity and strain rate is highest. The seismicity is clustered between 5 and 10 km, defining an active layer, gently dipping north, on which the main normal faults, mostly dipping north, are rooting. It may be interpreted as a detachment zone, possibly related to the Phyllade thrust nappe. Young, active normal faults connecting the Aigion to the Psathopyrgos faults seem to control the spatial distribution of the microseismicity. This seismic activity is interpreted as a seismic creep from GPS measurements, which shows evidence for fast continuous slip on the deepest part on the detachment zone. Offshore, either the shallowest part of the faults is creeping, or the strain is relaxed in the shallow sediments, as inferred from the large NS strain gradient reported by GPS. The predicted subsidence of the central part of the rift is well fitted by the new continuous GPS measurements. The location of shallow earthquakes (between 5 and 3.5 km in depth) recorded on the on-shore Helike and Aigion faults are compatible with 50° and 60° mean dip angles, respectively. The offshore faults also show indirect evidence for high dip angles. This strongly differs from the low dip values reported for active faults more to the east of the rift, suggesting a significant structural or rheological change, possibly related to the hypothetical presence of the Phyllade nappe. Large seismic swarms, lasting weeks to months, seem to activate recent synrift as well as pre-rift faults. Most of the faults of the investigated area are in their latest part of cycle, so that the probability of at least one moderate to large earthquake (M = 6 to 6.7) is very high within a few decades. Furthermore, the region west to Aigion is likely to be in an accelerated state of extension, possibly 2 to 3 times its mean interseismic value. High resolution strain measurement, with a borehole dilatometer and long base hydrostatic tiltmeters, started end of 2002. A transient strain has been recorded by the dilatometer, lasting one hour, coincident with a local magnitude 3.7 earthquake. It is most probably associated with a slow slip event of magnitude around 5 ± 0.5. The pore pressure data from the 1 km deep AIG10 borehole, crossing the Aigion fault at depth, shows a 1 MPa overpressure and a large sensitivity to crustal strain changes. 相似文献
10.
Deformation models used to explain the triggering mechanism often assume pure elastic behaviour for the crust and upper mantle. In reality however, the mantle and possibly the lower crust behave viscoelastically, particularly over longer time scales. Consequently, the stress field of an earthquake is in general time-dependent. In addition, if the elastic stress increase were enough to trigger a later earthquake, this triggered event should occur instantaneously and not many years after the triggering event. Hence, it is appropriate to include inelastic behaviour when analysing stress transfer and earthquake interaction.In this work, we analyse a sequence of 10 magnitude Ms > 6.5 events along the North Anatolian Fault between 1939 and 1999 to study the evolution of the regional Coulomb stress field. We investigate the triggering of these events by stress transfer, taking viscoelastic relaxation into account. We evaluate the contribution of elastic stress changes, of post-seismic viscoelastic relaxation in the lower crust and mantle, and of steady tectonic loading to the total Coulomb stress field. We analyse the evolution of stress in the region under study, as well as on the rupture surfaces of the considered events and their epicentres. We study the state of the Coulomb stress field before the 1999 İzmit and Düzce earthquakes, as well as in the Marmara Sea region.In general, the Coulomb stress failure criterion offers a plausible explanation for the location of these events. However, we show that using a purely elastic model disregards an important part of the actual stress increase/decrease. In several cases, post-seismic relaxation effects are important and greater in magnitude than the stress changes due to steady tectonic loading. Consequently, viscoelastic relaxation should be considered in any study dealing with Coulomb stress changes.According to our study, and assuming that an important part of the rupture surface must be stressed for an earthquake to occur, the most likely value for the viscosity of the lower crust or mantle in this region is 5 · 1017–1018 Pa · s. Our results cannot rule out the possibility of other time-dependent processes involved in the triggering of the 1999 Düzce event. However, the stress increase due to viscoelastic relaxation brought 22% of the 1999 Düzce rupture area over the threshold value of Δσc ≥ 0.01 MPa (0.1 bar), and took the whole surface closer to failure by an average of 0.2 MPa. Finally, we argue that the Marmara Sea region is currently being loaded with positive Coulomb stresses at a much faster rate than would arise exclusively from steady tectonic loading on the North Anatolian Fault. 相似文献
11.
E. Lagios V. Sakkas P. Papadimitriou I. Parcharidis B.N. Damiata K. Chousianitis S. Vassilopoulou 《Tectonophysics》2007,444(1-4):119-145
Ground deformation studies based on Differential GPS (DGPS) and Differential Interferometric SAR (DInSAR) analyses have been conducted in the seismically active area of the Central Ionian Islands. Local GPS networks were installed in Cephallonia (2001) and Zakynthos (2005). The Cephallonian network has been remeasured five times and Zakynthos' once as of July 2006. The studies have yielded detailed information regarding both local and regional deformations that are occurring in the area.For Lefkas Island, DInSAR analysis (March to September 2003) revealed 56 mm of uplift in the central and western parts and is attributed to the August 2003 earthquake (Mw = 6.3) that occurred offshore to the west. Synthetic DInSAR modelling of the magnitude and extent of deformation is consistent with the seismologically deduced parameters for the ruptured segment along the Lefkas Transform Fault. Subsidence (< 28 mm) along the northern part of the island is attributed to local conditions unrelated to the earthquake. For Zakynthos Island, large-magnitude earthquakes that occurred offshore to the south in October 2005 and April 2006 most likely contributed to the observed deformation as deduced from DGPS measurements for an encompassing period (August 2005 to July 2006). The largest amount of horizontal deformation occurred in the south, where its western part moved in a W–NW direction, while the eastern part moved towards the NE, with magnitudes ranging from 15 to 26 mm. The southern part of the island uplifted a maximum of 65 mm whereas the north subsided from 12 to 28 mm.For Cephallonia Island, DInSAR analysis (1995 to 1998) indicated ground deformation up to 28 mm located in small sections of the island. Further interferometric analysis for the period 2003 to 2004, encompassing the occurrence of the Lefkas earthquake in August 2003, indicated 28 mm of uplift in the northern part, while during the next two years (2004 to 2005), further uplift of at least 56 mm had taken place at the western and northern part of the island.DGPS measurements for the period 2001 to 2006 revealed a clockwise rotation of the island with respect to a centrally located station on Aenos Mt. The horizontal component of deformation generally ranged from 6 to 34 mm, with the largest values at the western and northern parts of the island. Considering the vertical deformation, two periods are distinguished. The first one (2001 to 2003) is consistent with anticipated motions associated with the main geological and tectonic features of the island. The second one (2003 to 2006) has been tentatively attributed to dilatancy in which relatively small uplift (20–40 mm) occurred along the southern and southeastern parts of the island, while larger magnitudes (> 50 mm) happened at the western part (Paliki Peninsula). These large magnitudes of uplift over an extended area (> 50 km), in conjunction with an accelerated Benioff strain determined from the analysis of the seismicity in the broader region, are consistent with dilatancy. This effect commenced some time after 2003 and is probably centered in the area between Zakynthos and Cephallonia. If this interpretation is correct, it may foreshadow the occurrence of a very strong earthquake(s) sometime during 2007 to 2008 in the above designated region. 相似文献
12.
Southern Italy is dominated by extensional tectonics that in the Calabrian arc and Eastern Sicily produced the development of the Siculo–Calabrian Rift Zone (SCRZ). This zone is represented by a ≈ 370 km-long fault belt consisting of 10 to 50 km long distinct fault segments which extend both offshore and on land being also responsible of the crustal seismicity of this region. The geological and morphological observations indicate that the active normal faults of the SCRZ are characterized by throw-rates ranging from 0.7 to 3.1 mm/a. They accommodate an almost uniform horizontal extension-rate of about 3.0 mm/a along a WNW–ESE regional extension direction. Based on our field observations and following empirical relationships between magnitude and surface rupture length connections between large crustal earthquakes and distinct fault segments of the SCRZ have been also tentatively tested. Our data indicate moreover that the magnitudes (M) of the historical and instrumental earthquakes are consistent with the estimated values and that the geometry and kinematics of the fault segments and the related different crustal features of the SCRZ control the different seismic behaviours of adjacent portions of the active rift zone. 相似文献
13.
At continental subduction initiation, the continental crust buoyancy may induce, first, a convergence slowdown, and second, a compressive stress increase that could lead to the forearc lithosphere rupture. Both processes could influence the slab surface P–T conditions, favoring on one side crust partial melting or on the opposite the formation of ultra-high pressure/low temperature (UHP-LT) mineral. We quantify these two effects by performing numerical simulations of subduction. Water transfers are computed as a function of slab dehydration/overlying mantle hydration reactions, and a strength decrease is imposed for hydrated mantle rocks. The model starts with an old oceanic plate ( 100 Ma) subducting for 145.5 Myr with a 5 cm/yr convergence rate. The arc lithosphere is thermally thinned between 100 km and 310 km away from the trench, due to small-scale convection occuring in the water-saturated mantle wedge. We test the influence of convergence slowdown by carrying on subduction with a decreased convergence rate (≤ 2 cm/yr). Surprisingly, the subduction slowdown yields not only a strong slab warming at great depth (> 80 km), but also a significant cooling of the forearc lithosphere at shallower depth. The convergence slowdown increases the subducted crust temperature at 90 km depth to 705 ± 62 °C, depending on the convergence rate reduction, and might thus favor the oceanic crust partial melting in presence of water. For subduction velocities ≤ 1 cm/yr, slab breakoff is triggered 20–32 Myr after slowdown onset, due to a drastic slab thermal weakening in the vicinity of the interplate plane base. At last, the rupture of the weakened forearc is simulated by imposing in the thinnest part of the overlying lithosphere a dipping weakness plane. For convergence with rates ≥ 1 cm/yr, the thinned forearc first shortens, then starts subducting along the slab surface. The forearc lithosphere subduction stops the slab surface warming by hot asthenosphere corner flow, and decreases in a first stage the slab surface temperature to 630 ± 20 °C at 80 km depth, in agreement with P–T range inferred from natural records of UHP-LT metamorphism. The subducted crust temperature is further reduced to 405 ± 10 °C for the crust directly buried below the subducting forearc. Such a cold thermal state at great depth has never been sampled in collision zones, suggesting that forearc subduction might not be always required to explain UHP-LT metamorphsim. 相似文献
14.
We report an empirical determination of the probability density functions Pdata(r) of the number r of earthquakes in finite space–time windows for the California catalog for different space (5 × 5 to 50 × 50 km2) and time intervals (0.1 to 1000 days). The data can be represented by asymptotic power law tails together with several cross-overs reasonably explained by one of the most used reference model in seismology (ETAS), which assumes that each earthquake can trigger other earthquakes according to complex cascades. These results are useful to constrain the physics of earthquakes and to estimate the performance of forecasting models of seismicity. 相似文献
15.
We have studied the focal mechanisms of the 1980, 1997 and 1998 earthquakes in the Azores region from body-wave inversion of digital GDSN (Global Digital Seismograph Network) and broadband data. For the 1980 and 1998 shocks, we have obtained strike–slip faulting, with the rupture process made up of two sub-events in both shocks, with total scalar seismic moments of 1.9 × 1019 Nm (Mw = 6.8) and 1.4 × 1018 Nm (Mw = 6.0), respectively. For the 1997 shock, we have obtained a normal faulting mechanism, with the rupture process made up of three sub-events, with a total scalar seismic moment of 7.7 × 1017 Nm (Mw = 5.9). A common characteristic of these three earthquakes was the shallow focal depth, less than 10 km, in agreement with the oceanic-type crust. From the directivity function of Rayleigh (LR) waves, we have identified the NW–SE plane as the rupture plane for the 1980 and 1998 earthquakes with the rupture propagating to the SE. Slow rupture velocity, about of 1.5 km/s, has been estimated from directivity function for the 1980 and 1998 earthquakes. From spectral analysis and body-wave inversion, fault dimensions, stress drop and average slip have been estimated. Focal mechanisms of the three earthquakes we have studied, together with focal mechanisms obtained by other authors, have been used in order to obtain a seismotectonic model for the Azores region. We have found different types of behaviour present along the region. It can be divided into two zones: Zone I, from 30°W to 27°W; Zone II, from 27°W to 23°W, with a change in the seismicity and stress direction from Zone I. In Zone I, the total seismic moment tensor obtained corresponded to left-lateral strike–slip faulting with horizontal pressure and tension axes in the E–W and N–S directions, respectively. In Zone II, the total seismic moment tensor corresponded to normal faulting, with a horizontal tension axis trending NE–SW, normal to the Terceira Ridge. The stress pattern for the whole region corresponds to horizontal extension with an average seismic slip rate of 4.4 mm/yr. 相似文献
16.
Aggregates composed of olivine and magnesiowüstite have been deformed to large strains at high pressure and temperature to investigate stress and strain partitioning, phase segregation and possible localization of deformation in a polyphase material. Samples with 20 vol.% of natural olivine and 80 vol.% of (Mg0.7Fe0.3)O were synthesized and deformed in a gas-medium torsion apparatus at temperatures of 1127 °C and 1250 °C, a confining pressure of 300 MPa and constant angular displacement rates equivalent to constant shear strain rates of 1–3.3 × 10− 4 s− 1. The samples deformed homogeneously to total shear strains of up to γ 15. During constant strain rate measurements the flow stress remained approximately stable at 1250 °C while it progressively decreased after the initial yield stress at the lower temperature. Mechanical data, microstructures and textures indicate that both phases were deforming in the dislocation creep regime. The weaker component, magnesiowüstite, controlled the rheological behavior of the bulk material and accommodated most of the strain. Deformation and dynamic recrystallization lead to grain refinement and to textures that were not previously observed in pure magnesiowüstite and may have developed due to the presence of the second phase. At 1127 °C, olivine grains behaved as semi-rigid inclusions rotating in a viscous matrix. At 1250 °C, some olivine grains remained largely undeformed while deformation and recrystallization of other grains oriented for a-slip on (010) resulted in a weak foliation and a texture typical for pure dry olivine aggregates. Both a-slip and c-slip on (010) were activated in olivine even though the nominal stresses were up to 2 orders of magnitude lower than those needed to activate these slip systems in pure olivine at the same conditions. 相似文献
17.
Water injection experiments were performed in 1997, 2000 and 2003 at the 1800 m borehole near the fracture zone of the 1995 Hyogo-ken Nanbu earthquake. During these experiments, a contraction of about 10− 8–10− 7 was observed with three-component strainmeters at a bottom of the 800 m borehole, 70 m southwest of the 1800 m borehole. We estimated hydraulic properties of the fracture zone near the Nojima fault by using the strain data to investigate a healing of the fault during the postseismic stage. We calculated pore pressure changes due to the water injection using Darcy's equation and obtained strain changes due to the pore pressure changes as elastic deformations of the crust. The calculated strain changes have a nearly agreement with the observed strain changes. Hydraulic conductivity in 1997, 2000 and 2003 was determined to be 0.9 ± 0.2 × 10− 6, 0.8 ± 0.2 × 10− 6 and 0.4 ± 0.1 × 10− 6 m/s, respectively. The reduced hydraulic conductivities in 2000 and 2003 suggest that the fractures had been healing. 相似文献
18.
We have applied an earthquake clustering epidemic model to real time data at the Italian Earthquake Data Center operated by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) for short-term forecasting of moderate and large earthquakes in Italy. In this epidemic-type model every earthquake is regarded, at the same time, as being triggered by previous events and triggering following earthquakes. The model uses earthquake data only, with no explicit use of tectonic, geologic, or geodetic information. The forecasts are displayed as time-dependent maps showing both the expected rate density of Ml ≥ 4.0 earthquakes and the probability of ground shaking exceeding Modified Mercalli Intensity VI (PGA ≥ 0.01 g) in an area of 100 × 100 km2 around the zone of maximum expected rate density in the following 24 h. For testing purposes, the overall probability of occurrence of an Ml ≥ 4.5 earthquake in the same area of 100 × 100 km2 is also estimated. The whole procedure is tested in real time, for internal use only, at the INGV Earthquake Data Center.Forecast verification procedures have been carried out in forward-retrospective way on the 2006–2007 INGV data set, making use of statistical tools as the Relative Operating Characteristics (ROC) diagrams. These procedures show that the clustering epidemic model performs up to several hundred times better than a simple random forecasting hypothesis. The seismic hazard modeling approach so developed, after a suitable period of testing and refinement, is expected to provide a useful contribution to real time earthquake hazard assessment, even with a possible practical application for decision making and public information. 相似文献
19.
Alfred Ngomanda Dominique Jolly Ilhem Bentaleb Alex Chepstow-Lusty M'voubou Makaya Jean Maley Michel Fontugne Richard Oslisly Nicaise Rabenkogo 《Quaternary Research》2007,67(3):411-425
Pollen and δ13CTOM data obtained from two contrasting lake sequences (Lakes Kamalété and Nguène), located 200 km apart in the lowland rainforest of Gabon, provide complementary local and regional 1500-yr records of high resolution (15–30 yr) vegetation change. A combination of aquatic, semi-aquatic and terrestrial pollen showed in both records that the tropical rainforest increased during periods of high rainfall and decreased during drought intervals. The strong fluctuations of water balance at decadal scale during the “Medieval Warm Period” ( 1100–800 cal yr BP) coincided with a noticeable increase in shade-intolerant taxa, indicating recurring rainforest canopy disturbance. The δ13CTOM signal showed high-amplitude variations in both records, which positively correlates with the rainforest dynamics and local vegetation changes. The similar trends in both the pollen and the δ13CTOM signals between these sites demonstrate the regional broadly synchronous timing of shifting hydrological conditions. The largely positive co-variation between strong fluctuations of hydrological conditions and changes in rainforest structure and composition indicate that regional climatic change is probably the driving force for major rainforest dynamics in Gabon. Any significant anthropogenic impact on vegetation has not been clearly identified, and this issue still needs to be resolved independently by obtaining detailed archeological records across the interval 1400–800 BP, which currently seem to be extremely rare or not easily available. 相似文献
20.
Nitrogen geochemistry of Upper Carboniferous shales from the Central European Basin (CEB) was investigated by elemental analysis, stable isotope mass spectrometry and non-isothermal pyrolysis. Total N-contents of Namurian shales from four deep wells (4400–7000 m) in NE Germany ranged between 520 and 2680 ppm. Up to 90% of this nitrogen occurs as ammonium in minerals with δ15N values between + 1‰ and + 3.5‰. Low nitrogen contents (down to 460 ppm) and high δ15N values (up to + 5.6‰) in one well in the basin centre suggest a large-scale release of nitrogen associated with isotopic fractionation. Pyrolytic liberation of N2 from pelagic Namurian A shales of NW and NE Germany occurred at significantly lower temperatures than from paralic Namurian B shales and terrestrial Westphalian samples. On-line isotope analysis of N2 liberated between 400 and 1200 °C indicates the presence of precursor pools with different thermal stability and nitrogen isotopic composition. 相似文献