Overview of the subsurface structural pattern of the Paris Basin (France): Insights from the reprocessing and interpretation of regional seismic lines

The study presents the methodology used by the French Geological Survey (BRGM) for the building, reprocessing and interpretation of selected regional seismic lines in the Paris intracratonic basin (France): the 14 constructed E-W and N-S regional transects represent a total of 2,516 km length, and are based on the merge of 240 seismic single profiles recorded by petroleum operators between 1971 and 1995. The regional lines have been selected to cross the main oil fields of the Paris Basin, as well as high potential areas for oil exploration. A first difficulty was to recover the raw data necessary to build-up the regional transects. The signal reprocessing, harmonization and merge of the single seismic lines, constituent of the regional transects, are then described; these operations represent the cornerstone of the study. We put the emphasis on the primary static corrections, as the targeted structures are commonly spatially associated with large seismic velocity variations in the upper Cretaceous chalk and Tertiary sedimentary cover.The interpreted regional transects definitely give complementary information to the existing studies, which generally lack seismic (and therefore structural) data: we give an overview of the main structural and geometrical features of the Paris Basin: inversion structures, major unconformities, as well as Permo-Carboniferous basins. We also describe the structural pattern, and show the close relationships between the faults geometry, the faults density, and the geological evolution of the Paris Basin: we distinguish (1) few large-scale polyphase faults, with a Variscan origin, representing the first order structural frame of the Paris Basin; (2) monophase normal faults, with strike-slip features, representing the subsurface prolongation of Cenozoic grabens cropping out in the neighbourhood; (3) deep normal faults, sealed by the base Calcareous Dogger sequence, related to the Permo-Liassic extensional tectonic regime. This large-scale view of the Paris Basin has highlighted several potential exploration targets.     

Miocene facies associations and sedimentary evolution of the Southern Transylvanian Basin (Romania): Implications for hydrocarbon exploration

The Transylvanian Basin is a mature hydrocarbon province of Romania characterized by two petroleum systems: Mesozoic (thermogenic) and Miocene (biogenic). An extensive outcrop-based sedimentological and micropaleontological study correlated to seismic and well data discusses the elements of the Miocene petroleum system. The facies associations are indicative of alluvial, fandelta, shallow- and deep-marine settings. These are grouped into four different depositional systems (evaporite, mud-carbonate, sand-mud and sand-gravel). Their evolution in time and space shows large differences between various parts of the basin that have important consequences for exploration.     

Formation of saddle dolomites in Upper Cambrian carbonates, western Tarim Basin (northwest China): Implications for fault-related fluid flow

The saddle dolomites occur more intensely in cores closely to fault than that in cores far away from the fault in Upper Cambrian carbonate of western Tarim basin, suggesting that formation of the saddle dolomites is likely related to fault-controlled fluid flow. They partially fill in fractures and vugs of replacement dolomite. The saddle dolomites exhibit complex internal textures, commonly consisting of core and cortex. In comparison with the matrix dolomites, the saddle dolomites show lower Sr-content and ⁸⁷Sr/⁸⁶Sr ratios, higher Fe- and Mn-content, and more negative δ¹⁸O values. Combined with high Th (100–130 °C) of primary fluid inclusions, it is suggested that the saddle dolomites precipitated from hydrothermal fluid derived from the deep evaporite-bearing Middle Cambrian strata, and the magnesium source may be due to dissolution of host dolomite during hydrothermal fluid migration. Fault activity resulted in petrographic and geochemical difference of the core and cortex of the saddle dolomites. The cores precipitated from the formation water mixed by deep brines at the early stage of fault activity, and the cortexes precipitated from the deep fluid with higher temperatures through the Middle Cambrian later. In summary, the formation of the saddle dolomites implies a hydrothermal fluid event related to fault activity, which also resulted in high porosity in Upper Cambrian carbonate in western Tarim Basin.     

Geomorphology and sedimentary sequence evolution during the buried stage of paleo-uplift in the Lower Cretaceous Qingshuihe Formation,Junggar Basin,northwestern China: Implications for reservoir lithofacies and hydrocarbon distribution

The evolution of large-scale paleo-uplifts within sedimentary basins controls the sedimentary provenance, depositional systems and hydrocarbon distributions. This study aims to unravel changes in paleo-geomorphology, interpret sedimentary sequence evolution, and investigate favourable reservoir types and the hydrocarbon distribution during the buried stage of a long-term eroded paleo-uplift, taking the Lower Cretaceous Qingshuihe Formation (K₁q) in the Junggar Basin as an example. These research topics have rarely been studied or are poorly understood. This study integrates current drilling production data with outcrop and core analyses, drilling well logs, 3D seismic data interpretations, grading data, physical property comparisons and identified hydrocarbon distributions.After more than 20 million years of differential river erosion and weathering in arid conditions, the large-scale Chemo paleo-uplift within the hinterland area of the basin formed a distinctive valley–monadnock paleo-geomorphology prior to the deposition of K₁q. Since the Early Cretaceous, tectonic subsidence and humid conditions have caused the base level (lake level) to rise, leading to backfilling of valleys and burial processes. Two systems tracts in the target strata of K₁q, consisting of distinctive depositional systems, can be identified: (1) a lowstand systems tract (LST), which is confined within incised valleys and is mainly composed of gravelly braided rivers and rarely occurring debris flows and (2) an extensive transgressive systems tract (TST), which developed into an almost flat landform and consists of braided river delta to lacustrine depositional systems. Overall, the physical properties of braided river reservoirs in the LST are better than those of the braided river delta reservoirs in the TST. However, the inhomogeneous distributions of carbonate cements cause differences in the physical properties of conglomerate reservoirs in the LST. However, for sandstones in both the LST and TST, coarser grain sizes and better sorting result in better physical properties. Altogether, four types of reservoir can be identified in the study area: Jurassic inner monadnock reservoirs, K₁q LST stratigraphic onlap reservoirs, LST structural reservoirs and TST structural reservoirs.     

Recent sediment dynamics in hadal trenches: Evidence for the influence of higher-frequency (tidal,near-inertial) fluid dynamics

In addition to high hydrostatic pressure, scarcity of food is viewed as a factor that limits the abundance and activity of heterotrophic organisms at great ocean depths, including hadal trenches. Supply of nutritious food largely relies on the flux of organic-rich particulate matter from the surface ocean. It has been speculated that the shape of hadal trenches helps to ‘funnel’ particulate matter into the deeper parts of the trench, leading to sediment ‘focussing’ and improved benthic food supply. Here we investigate for five Northwest Pacific trenches the efficiency of sediment focussing by evaluating ratios of measured (sediment-derived) and expected (water-column-derived) sedimentary inventories of the naturally occurring and radioactive particulate-matter tracer ²¹⁰Pb_xs. The sites comprise a broad range of surface-ocean productivity and physical-oceanographic regimes. Across the five trench-axis settings the inventory ratio varies between 0.5 and 4.1, with four trench-axis settings having ratios>1 (sediment focussing) and one trench-axis setting a ratio<1 (sediment winnowing). Although the fluid- and sediment-dynamical forcing behind sediment focussing remains unclear, this study finds evidence for another mechanism that is superimposed on, and counteracts, the focussing mechanism. This superimposed mechanism is related to higher-frequency (tidal, near-inertial) fluid dynamics. In particular, there is evidence for a strong and negative relation between the intensity of propagating internal tides and the extent of sediment focussing in the trench-axis. The relation can be approximated by a power function and the most intense drop in sediment focussing already occurs at moderate internal-tide intensities. This suggests that propagating internal tides may have a subtle but significant influence on particulate-matter dynamics and food supply in hadal trenches in particular, but possibly also in the deep seas in general. A mechanism for the influence of internal tides on sediment dynamics is proposed.     

Diagenesis and origin of calcite cement in the Flemish Pass Basin sandstone reservoir (Upper Jurassic): Implications for porosity development

The Flemish Pass Basin is a deep-water basin located offshore on the continental passive margin of the Grand Banks, eastern Newfoundland, which is currently a hydrocarbon exploration target. The current study investigates the petrographic characteristics and origin of carbonate cements in the Ti-3 Member, a primary clastic reservoir interval of the Bodhrán Formation (Upper Jurassic) in the Flemish Pass Basin.The Ti-3 sandstones with average Q_86.0F_3.1R_10.9 contain various diagenetic minerals, including calcite, pyrite, quartz overgrowth, dolomite and siderite. Based on the volume of calcite cement, the investigated sandstones can be classified into (1) calcite-cemented intervals (>20% calcite), and (2) poorly calcite-cemented intervals (porous). Petrographic analysis shows that the dominant cement is intergranular poikilotopic (300–500 μm) calcite, which stared to form extensively at early diagenesis. The precipitation of calcite occured after feldspar leaching and was followed by corrosion of quartz grains. Intergranular calcite cement hosts all-liquid inclusions mainly in the crystal core, but rare primary two-phase (liquid and vapor) fluid inclusions in the rims ((with mean homogenization temperature (T_h) of 70.2 ± 4.9 °C and salinity estimates of 8.8 ± 1.2 eq. wt.% NaCl). The mean δ¹⁸O and δ¹³C isotopic compositions of the intergranular calcite are −8.3 ± 1.2‰, VPDB and −3.0 ± 1.3‰, VPDB, respectively; whereas, fracture-filling calcite has more depleted δ¹⁸O but similar δ¹³C values. The shale normalized rare earth element (REE_SN) patterns of calcite are generally parallel and exhibit slightly negative Ce anomalies and positive Eu anomalies. Fluid-inclusion gas ratios (CO₂/CH₄ and N₂/Ar) of calcite cement further confirms that diagenetic fluids originated from modified seawater. Combined evidence from petrographic, microthermometric and geochemical analyses suggest that (1) the intergranular calcite cement precipitated from diagenetic fluids of mixed marine and meteoric (riverine) waters in suboxic conditions; (2)the cement was sourced from the oxidation of organic matters and the dissolution of biogenic marine carbonates within sandstone beds or adjacent silty mudstones; and (3) the late phases of the intergranular and fracture-filling calcite cements were deposited from hot circulated basinal fluids.Calcite cementation acts as a main controlling factor on the reservoir quality in the Flemish Pass reservoir sandstones. Over 75% of initial porosity was lost due to the early calcite cementation. The development of secondary porosity (mostly enlarged, moldic pores) and throats by later calcite dissolution due to maturation of organic matters (e.g., hydrocarbon and coals), was the key process in improving the reservoir quality.     

Dissolution mechanism of a deep-buried sandstone reservoir in a deep water area: A case study from Baiyun Sag,Zhujiang River (Pearl River) Mouth Basin

Dissolution mechanism and favorable reservoir distribution prediction are the key problems restricting oil and gas exploration in deep-buried layers. In this paper, the Enping Formation and Zhuhai Formation in Baiyun Sag of South China Sea was taken as a target. Based on the thin section, scanning electron microscopy, X-ray diffraction, porosity/permeability measurement, and mercury injection, influencing factors of dissolution were examined, and a dissolution model was established. Further, high-quality reservoirs were predicted temporally and spatially. The results show that dissolved pores constituted the main space of the Paleogene sandstone reservoir. Dissolution primarily occurred in the coarse- and medium-grained sandstones in the subaerial and subaqueous distributary channels, while dissolution was limited in fine-grained sandstones and inequigranular sandstones. The main dissolved minerals were feldspar, tuffaceous matrix, and diagenetic cement. Kaolinization of feldspar and illitization of kaolinite are the main dissolution pathways, but they occur at various depths and temperatures with different geothermal gradients. Dissolution is controlled by four factors, in terms of depositional facies, source rock evolution, overpressure, and fault activities, which co-acted at the period of 23.8–13.8 Ma, and resulted into strong dissolution. Additionally, based on these factors, high-quality reservoirs of the Enping and Zhuhai formations are predicted in the northern slope, southwestern step zone, and Liuhua uplift in the Baiyun Sag.     

Distribution of the genus Hypoplectrus (Teleostei: Serranidae) in the Greater Caribbean Region: support for a color‐based speciation

The reef‐associated fish genus Hypoplectrus (Serranidae), endemic to the western Atlantic Ocean, represents an ideal model to study speciation within a potentially highly dispersive (marine) ecosystem, because it consists of a complex of at least 10 morphs differentiated primarily by coloration. Although several recent studies on genetics, diet, and fertilization reveal little to no difference between the Hypoplectrus color morphs, there is still not a full understanding of what keeps these morphs distinct or drives their variation. Ecological information is needed alongside the genetic information to better understand this variation. Based on presence/absence records from scientific literature and direct observations in coral reefs, this work examined the distribution of the genus Hypoplectrus in the Greater Caribbean region. Some color morphs occurred simultaneously at given locations, but others showed geographic restrictions. Using cluster and nMDS analyses, we found three major groupings according to distribution: (i) widespread (Hypoplectrus puella, Hypoplectrus unicolor, and Hypoplectrus nigricans), (ii) less widespread (Hypoplectrus indigo, Hypoplectrus gummigutta, Hypoplectrus chlorurus, Hypoplectrus aberrans, and Hypoplectrus guttavarius), and (iii) geographically confined or segregated (Hypoplectrus gemma, Hypoplectrus providencianus). Geographic sections selected for the Greater Caribbean (eastern, western and northern) were dominated by at least three widely distributed Hypoplectrus morphs. New geographic records of some color morphs were documented and compared to previous established distribution ranges in the Greater Caribbean.     

Mineralogical and chemical distribution of the Es3L oil shale in the Jiyang Depression,Bohai Bay Basin (E China): Implications for paleoenvironmental reconstruction and organic matter accumulation

The Es₃^L (lower sub-member of the third member of the Eocene Shahejie Formation) shale in the Jiyang Depression is a set of relatively thick and widely deposited lacustrine sediments with elevated organic carbon, and is considered to be one of the most important source rocks in East China. We can determine the mineralogy, organic and inorganic geochemistry of the Es₃^L shale and calculate paleoclimate indexes by using multiple geochemical proxies based on organic chemistry (total organic carbon [TOC] and Rock-Eval pyrolysis), major and trace elements, X-Ray diffraction, and carbon and oxygen isotope data from key wells alongside ECS (Elemental Capture Spectroscopy) well log data. These indicators can be used to analyze the evolution of the paleoenvironment and provide a mechanism of organic matter (OM) accumulation. The Es₃^L oil shale has high TOC abundance (most samples >3.0%) and is dominated by Type I kerogens. Additionally, the organic-rich shale is rich in CaO and enrichment in some trace metals is present, such as Sr, Ba and U. The positive δ¹³C and negative δ¹⁸O values, high Sr/Ba, B/Ga and Ca/Ca + Fe ratios and low C/S ratios indicate that the Es₃^L shales were mainly deposited in a semi-closed freshwater-brackish water lacustrine environment. The consistently low Ti/Al and Si/Al ratios reflect a restricted but rather homogeneous nature for the detrital supply. Many redox indicators, including the Th/U, V/(V + Ni), and δU ratios, pyrite morphology and TOC-TS-Fe diagrams suggest deposition under dysoxic to suboxic conditions. Subsequently, the brackish saline bottom water evolved into an anoxic water body under a relatively arid environment, during which organic-lean marls were deposited in the early stage. Later, an enhanced warm-humid climate provided an abundant mineral nutrient supply and promoted the accumulation of algal material. OM input from algal blooms reached a maximum during the deposition of the organic-rich calcareous shale with seasonal laminations. High P/Ti ratios and a strongly positive relationship between the P and TOC contents indicate that OM accumulation in the oil shale was mainly controlled by the high primary productivity of surface waters with help from a less stratified water column. Factors such as the physical protection of clay minerals and the dilution of detrital influx show less influence on OM enrichment.     

Reproductive biology of Ilisha elongata (Teleostei: Pristigasteridae) in Ariake Sound,Japan: Implications for estuarine fish conservation in Asia

Elongate ilisha (Ilisha enlongata) is a commercially important species that contributes to clupeoid fisheries in Asian countries. In the present study, the reproductive biology of I. elongata in Ariake Sound, Japan is determined for the first time. Six maturity stages were described using ovarian and testicular histology throughout the annual cycle. The spawning season in Ariake Sound lasts from May to July, with peak spawning activity in May and June. Age at first maturity was estimated to be 2 years, with a few exceptions of 1 year in well-developed males. Ovaries that contained both tertiary yolk oocytes and postovulatory follicles occurred from late May to late July, indicating that I. elongata is a multiple spawner. The size–frequency distribution of oocytes provided evidence for its multiple spawning and accuracy of the fecundity estimates. The batch fecundity of this species was estimated at between 22,200 and 270,900 eggs per individual, increasing with age between two and six years. The present findings on the reproductive strategy of I. elongata in Ariake Sound are generally consistent with those in temperate or subtropical populations, but quite different from those of tropical population where first maturation occurs around 200 days and life spans are shorter, with a maximum age less than 3 years. The conservation implications of this reproductive strategy in a harsh, variable environment in Asian countries are also discussed.     

Mapping gas hydrate and fluid flow indicators and modeling gas hydrate stability zone (GHSZ) in the Ulleung Basin,East (Japan) Sea: Potential linkage between the occurrence of mass failures and gas hydrate dissociation

The Ulleung Basin, East (Japan) Sea, is well-known for the occurrence of submarine slope failures along its entire margins and associated mass-transport deposits (MTDs). Previous studies postulated that gas hydrates which broadly exist in the basin could be related with the failure process. In this study, we identified various features of slope failures on the margins, such as landslide scars, slide/slump bodies, glide planes and MTDs, from a regional multi-channel seismic dataset. Seismic indicators of gas hydrates and associated gas/fluid flow, such as the bottom-simulating reflector (BSR), seismic chimneys, pockmarks, and reflection anomalies, were re-compiled. The gas hydrate occurrence zone (GHOZ) within the slope sediments was defined from the BSR distribution. The BSR is more pronounced along the southwestern slope. Its minimal depth is about 100 m below seafloor (mbsf) at about 300 m below sea-level (mbsl). Gas/fluid flow and seepage structures were present on the seismic data as columnar acoustic-blanking zones varying in width and height from tens to hundreds of meters. They were classified into: (a) buried seismic chimneys (BSC), (b) chimneys with a mound (SCM), and (c) chimneys with a depression/pockmark (SCD) on the seafloor. Reflection anomalies, i.e., enhanced reflections below the BSR and hyperbolic reflections which could indicate the presence of gas, together with pockmarks which are not associated with seismic chimneys, and SCDs are predominant in the western-southwestern margin, while the BSR, BSCs and SCMs are widely distributed in the southern and southwestern margins. Calculation of the present-day gas-hydrate stability zone (GHSZ) shows that the base of the GHSZ (BGHSZ) pinches out at water depths ranging between 180 and 260 mbsl. The occurrence of the uppermost landslide scars which is below about 190 mbsl is close to the range of the GHSZ pinch-out. The depths of the BSR are typically greater than the depths of the BGHSZ on the basin margins which may imply that the GHOZ is not stable. Close correlation between the spatial distribution of landslides, seismic features of free gas, gas/fluid flow and expulsion and the GHSZ may suggest that excess pore-pressure caused by gas hydrate dissociation could have had a role in slope failures.     

The Effect of Temporal Changes and Environmental Trophic Condition on the Isotopic Composition (ω13C and ω15N) of Atherina boyeri (Risso, 1810) and Gobius niger (L., 1758) in a Mediterranean Coastal Lagoon (Lake of Sabaudia): Implications for Food Web Structure

Abstract. ω¹³C and ω¹⁵N of organic matter sources and consumers were employed to analyse trophic differentiation between a benthic consumer, Gobius niger (L., 1758) (Pisces, Osteichthyes), and a pelagic consumer, Atherina boyeri (Risso, 1810) (Pisces, Osteichthyes) in a Mediterranean coastal lagoon (Lake of Sabaudia) in winter and summer 1999. Trophic differences between the two species throughout the two sampling periods were related to the environmental trophic condition (i. e. nutrient and phytopigment concentrations). Although these two fish have different habitats, they both exploited benthic organisms, above all in summer. When the nutrient and phytopigment concentrations were higher (summer), the most abundant benthic organisms were the main food sources for both species. In winter A. boyeri apparently shifted its feeding preferences to include zooplankton, confirming its opportunistic feeding strategy. Par-ticulate organic matter and algae seemed to play the main trophic role in the food web structure. Benthic invertebrates used both sources, while zooplankton seemed to rely exclusively on the particulate fraction. The overlapping and very depleted signatures of sedimentary and particulate organic matter highlights a strong link between sediments and water column, rarely observed in other aquatic ecosystems using stable isotopes. Such a finding further substantiates the importance of particulate organic matter as a food source in the study area.