Ecological–Biogeochemical Monitoring of a Linden Avenue in a Megapolis

Ecological–biogeochemical monitoring of a linden avenue on Kosygin Street, Moscow, has revealed that soils at sites regarded as contaminated contain elevated Mn, Fe, Sr, and Se concentrations and lower Zn contents. Linden leaves at the assumed contaminated sites typically contain higher Cu and Fe concentrations and not as much higher Zn, As, and Cr concentrations but much lower Mn and Sr concentrations. Water leachates of soils at sites regarded as background have slightly lower pH and lower Ca, Mg, K, and Na concentrations and total mineralization. Test for phytochelatins in the leaves proved to be rather ineffective, as also were estimates of the fluctuating asymmetry of the leaf laminas. The greatest differences were detected in the degree of leaf pathology and the contents of pigments.     

Noril’sk–Talnakh Cu–Ni–PGE deposits: a revised tectonic model

The Norilsk mining district is located at the northwest margin of the Tunguska basin, in the centre of the 3,000×4,000 km Siberian continental flood basalt (CFB) province. This CFB province was formed at the Permo-Triassic boundary from a superplume that ascended into the geometric centre of the Laurasian continent, which was surrounded by subducting slabs of oceanic crust. We suggest that these slabs could have reached the core–mantle boundary, and they may have controlled the geometric focus of the superplume. The resulting voluminous magma intruded and erupted in continental rifts and related extensive flood basalt events over a 2–4 Ma period. Cu–Ni–PGE sulfide mineralization is found in olivine-bearing differentiated mafic intrusions beneath the flood basalts at the northwestern margin of the Siberian craton and also in the Taimyr Peninsula, some 300 km east of a triple junction of continental rifts, now buried beneath the Mesozoic–Cenozoic sedimentary basin of western Siberia. The Norilsk-I and Talnakh-Oktyabrsky deposits occur in the Norilsk–Kharaelakh trough of the Tunguska CFB basin. The Cu–Ni–PGE-bearing mineralized intrusions are 2–3 km-wide and 20 km-long differentiated chonoliths. Previous studies suggested that parts of the magma remained in intermediate-level crustal chambers where sulfide saturation and accumulation took place before emplacement. The 5–7-km-thick Neoproterozoic to Palaeozoic country rocks, containing sedimentary Cu mineralization and evaporites, may have contributed additional metal and sulfur to this magma. Classic tectonomagmatic models for these deposits proposed that subvertical crustal faults, such as the northeast-trending Norilsk–Kharaelakh fault, were major trough-parallel conduits providing access for magmas to the final chambers. However, geological maps of the Norilsk region show that the Norilsk–Kharaelakh fault offsets the mineralization, which was deformed into folds and offset by related reverse faults, indicating compressional deformation after mineralization in the Late Triassic to Early Jurassic. In addition, most of the intrusions are sills, not dykes as should be expected if the vertical faults were major conduits. A revised tectonic model for the Norilsk region takes into account the fold structure and sill morphology of the dominant intrusions, indicating a lateral rather than vertical emplacement direction for the magma into final chambers. Taking into account the fold structure of the country rocks, the present distribution of the differentiated intrusions hosting the Norilsk-I and Talnakh–Oktyabrsky deposits may represent the remnants of a single, >60 km long, deformed and eroded palm-shaped cluster of mineralized intrusions, which are perceived as separate intrusions at the present erosional level. The original direction of sill emplacement may have been controlled by a northeast-trending paleo-rise, which we suggest is present at the southeastern border of the Norilsk–Kharaelakh trough based on analysis of the unconformity at the base of the CFB. The mineralized intrusions extend along this rise, which we interpret as a structure that formed above the extensionally tilted block in the metamorphic basement. Geophysical data indicate the presence of an intermediate magma chamber that could be linked with the Talnakh intrusion. In turn, this T-shaped flat chamber may link with the Yenisei–Khatanga rift along the northwest-trending Pyasina transform fault, which may have served as the principal magma conduit to the intermediate chamber. It then produced the differentiated mineralized intrusions that melted through the evaporites with in situ precipitation of massive, disseminated, and copper sulfide ore. The Norilsk–Kharaelakh crustal fault may not relate to mineralization and possibly formed in response to late Mesozoic spreading in the Arctic Ocean.Editorial handling: P. Lightfoot     

The giant Vergenoeg fluorite deposit in a magnetite–fluorite–fayalite REE pipe: a hydrothermally-altered carbonatite-related pegmatoid?

Summary The world-class Paleoproterozoic Vergenoeg fluorite deposit in South Africa is hosted in a breccia pipe comprising units with varying proportions of pegmatoidal fayalite, magnetite, fluorite and siderite. The adjacent A-type Bushveld granites also have associated fluorite deposits containing fluorite with similar REE patterns, fluid inclusion and Sr isotope compositions to those at Vergenoeg, leading to the proposal that there is a genetic relationship. This is despite the silica-undersaturated nature (SiO₂<30%) of the Pipe and its extreme enrichment in Ca, F, Fe, Nb, P and REE compared to granites. Both liquid immiscibility from a granitic melt and granitic magmato-hydrothermal activity have been proposed as genetic mechanisms to explain this exotic composition. However, the Vergenoeg Pipe shows greater similarities to alkaline rocks, in particular the Phalaborwa carbonatite of similar age, including: i) size and shape, ii) associated maars, iii) mineralogical zoning, iv) geochemical, radiogenic and stable isotope composition, and v) presence of both high-T and low-T fluid inclusions. This suggests an alternative genetic relationship with alkaline magmas, in which some geochemical and radiogenic isotopic similarities to Bushveld granites are the consequence of broadly contemporaneous development in the same tectonic setting within the same lithosphere, whereas others may be due to hydrothermal overprinting. Similarities with Phalaborwa and also with Bayan Obo, Mongolia, indicate that the Vergenoeg pegmatoid pipe could be an extreme carbonatite-associated member of the Fe-oxide Cu–Au (±REE±P) group of deposits.Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1007/s00710-003-0012-6Tables 1-4 available as electronic supplementary material     

Numerical analysis of a pile–slab-supported railway embankment

This paper presents a numerical analysis of a well-monitored pile–slab-supported embankment for the Beijing–Tianjin high-speed railway in China. Cement–fly ash–gravel piles were used in this project. A coupled two-dimensional mechanical and hydraulic numerical model was used for this analysis and the results are compared with the field measurements including settlement, load distribution between soil and pile, and excess pore pressure. The numerical model calculated the settlement profile close to that measured in the field. The proportion of the load carried by the soil was small thus significantly reducing the settlement. The stress transfer from the soil to the piles reduced the excess pore pressure effectively. A parametric study was conducted to investigate the influence of three key factors on the performance of the embankment. The parametric study indicated that the existence of a cushion reduced the shear force in the slab. The increase in slab thickness and pile stiffness increased the shear force and bending moment in the slab. An increase in pile stiffness reduced the settlement and lateral displacement of the embankment.     

Transitional–tensile fracture propagation: a status report

One model for the development of hybrid shear fractures is transitional–tensile fracture propagation, a process described as the in-plane propagation of a crack subject to a shear traction while held open by a tensile normal stress. Presumably, such propagation leads to a brittle structure that is the hybrid of a joint and a shear fracture. Crack–seal veins with oblique fibers are possible candidates. While these veins clearly show shear offset, this is not conclusive evidence that a shear traction was present at the time of initial crack propagation. Many recent structural geology textbooks use a parabolic Coulomb–Mohr failure envelope to explain the mechanics of transitional–tensile fracturing. However, the laboratory experiments cited as demonstrating transitional–tensile behavior fail to produce the fracture orientation predicted by a parabolic failure envelope. Additional attempts at verification include field examples of conjugate joint sets with small acute angles, but these conjugate joints form neither simultaneously nor in the stress field required by the transitional–tensile model. Finally, linear elastic fracture mechanics provides strong theoretical grounds for rejecting the notion that individual cracks propagate in their own plane when subject to a shear traction. These observations suggest that transitional–tensile fracture propagation is unlikely to occur in homogeneous, isotropic rock, and that it is not explained by a parabolic Coulomb–Mohr failure envelope as several recent structural geology textbooks have suggested.     

Synthesis and nutrient release patterns of a biochar-based N–P–K slow-release fertilizer

Biochar has excellent solute adsorption capacity, yet few studies have investigated its application as a nutrient carrier in the development of slow-release fertilizers. The current study developed a biochar-based N–P–K fertilizer (BSRF) and evaluated its nutrient release patterns relative to a conventional fertilizer. SEM and EDX analyses confirmed the coarse and highly porous microstructure of the biochar (SBC) that enabled it to effectively sorb NO₃ ^?, PO₄ ^3?, and K⁺ and form a nutrient-impregnated BSRF. BSRF had lower NO₃ ^?, PO₄ ^3?, and K⁺ release than the conventional chemical fertilizer, demonstrating its low release behavior. BSRF-amended sandy soil had higher water retention capacity than that amended with a conventional chemical fertilizer. BSRF has potential to reduce nutrient leaching, improve water retention, and hence increase crop nutrient and water use efficiencies. Future research should focus on understanding nutrient release mechanisms, synchronization of nutrient release with plant uptake, and applications of the BSRF in environmental remediation.     

Seismic precursors to a 2017 Nuugaatsiaq,Greenland, earthquake–landslide–tsunami event

High-frequency (5–20 Hz) seismic signals precursory to and embedded within the June 17, 2017 M_L?=?4 earthquake–landslide event are analyzed. This event in western Greenland generated a tsunami in Karrat fjord inundating Nuugaatsiaq village 32 km distant. Spectrogram and wavelet analyses of seismic data from the Greenland Ice Sheet Monitoring Network (GLISN) corroborate observations of seismic precursors at Nuugaatsiaq reported by Poli (Geophys Res Lett 44:8832–8836, 2017) and Caplan-Auerbach (in: AGU fall meeting abstracts, 2017) and reveal additional high-frequency arrivals being generated after the apparent initiation of fault rupture. New observations of seismic precursors 181 km from the Event at Upernavik, Greenland are correlated with those seen at Nuugaatsiaq. Wavelet analysis presents?>?100 significant energy peaks accelerating up to and into the earthquake–landslide event. The precursor events show a distinct, power law distribution, characterized by b values of ~?2.4. Results are compared and contrasted with small precursors observed in the studies of a natural chalk cliff landslide at Mesnil-Val, Haute Normandie, France. The earthquake–landslide appears to have been initiated by seismic precursors located at the fault scarp, leading to a small seismic foreshock and small landslide initiation, followed by a larger earthquake at the fault scarp, precipitating the primary landslide into the Karrat Fjord, which caused the subsequent tsunami.

     

Internal erosion monitoring with a rowe cell type compression–breakthrough–bender element column

Acta Geotechnica - A Rowe cell type compression-breakthrough-bender element column (CBB column) was developed to simulate and monitor the internal erosion process of glass bead (GB) and salt grain...     

Experimental modeling of native carbon formation in a C–O–H fluid system

Integrated data are presented on structure–morphology features, as well as on the material and phase composition, of a fluid-produced carbonaceous substance (CS) formed under known thermodynamic conditions of the experiment (C–O–H system, 500–800°C, and 500–1000 atm). Solid products of the synthesis were examined by means of X-ray phase and thermal analyses, scanning electron microscopy combined with microprobe analysis, transmission electron microscopy, high-resolution Raman spectroscopy, IR spectroscopy, and CHN-analysis. The characteristics of the experimental CS may be applicable in genetic modeling of natural ore-bearing fluidal carbonaceous systems.     

Preparation and Characterization of a New Layered Double Hydroxide, Mg–Fe–Ce

正1 Introduction In the present paper,MgCl2·6H2O,FeCl3·6H2O,and CeCl3·6H2O were used as raw materials in the precipitationhydrothermal method to synthesize MgF eC e hydrotalcite.The effects of the Fe:Ce molar ratio on the composition,crystal structure,and thermal stability of hydrotalcite are examined.Energy-dispersive X-ray spectroscopy(EDS),X-     

Thermodynamic modelling of a cooling C–O–H fluid–graphite system: implications for hydrothermal graphite precipitation

Carbon-saturated crustal fluids in the C–O–H system comprise H₂O, CO₂ and CH₄ as the most important fluid species. Graphite precipitation from a cooling C–O–H is discussed for two different systems, namely for a fluid–rock system in which no transfer of atomic oxygen and hydrogen between the fluid and the rock is possible (closed fluid system), and for an open fluid system. Thermodynamic model calculations show that the graphite-forming reactions and the graphite precipitation potential are different for these two systems. Furthermore, the calculations demonstrate that for both systems, the following factors play a role in determining the graphite precipitation potential, i.e. (1) the redox state of the fluid, (2) the initial pressure and temperature conditions and (3) whether cooling is combined with decompression. Open and closed fluid system graphite precipitation can be distinguished from each other using fluid inclusion and stable carbon isotope studies. The results of this study provide insight in the formation of hydrothermal graphite deposits.     

Geochemical modelling of a Zn–Pb skarn: Constraints from LA–ICP–MS analysis of fluid inclusions

The Bismark deposit (northern Chihuahua, Mexico) is one of several base metal-rich high-temperature, carbonate-replacement deposits hosted in northern Mexico. Previous fluid inclusion studies based on microthermometry and PIXE have shown that the Zn-rich, Pb-poor Bismark deposit formed from a moderate salinity magmatic fluid [Baker, T. and Lang, J.R., 2003. Reconciling fluid inclusion types, fluid processes, and fluid sources in skarns: an example from the Bismark Deposit, Mexico. Mineralium Deposita 38(4), 474–495; Baker, T., van Achterberg, E., Ryan, C.G. and Lang, J.R., 2004. Composition and evolution of ore fluids in a magmatic-hydrothermal skarn deposit. Geology 32(2), 117–120]. The exact precipitation mechanisms are unclear and may have due to cooling, salinity decrease and wall rock reaction. Furthermore, PIXE data suggested that Pb and Zn concentrations were comparable and inconsistent with the Zn-rich nature of the ore. However, Pb was commonly below the limit of detection for PIXE and the data presented by Baker et al. [Baker, T., van Achterberg, E., Ryan, C.G. and Lang, J.R., 2004. Composition and evolution of ore fluids in a magmatic-hydrothermal skarn deposit. Geology 32(2), 117–120] are regarded as the maximum concentrations of Pb in the fluid. In this study new LA ICP MS analysis was carried out on the same fluid inclusion population to compare with the PIXE data in order to constrain the uncertainty related to the Pb data and the new results are used to model possible ore deposition mechanisms. The new laser ablation data reveal overall lower concentrations of Pb in the ore fluid (average value ~ 285 ppm) than previously indicated by PIXE analysis (average value ~ 713 ppm). Chemical modelling using the new laser ablation data tested the following ore deposition processes: 1) cooling; 2) fluid–rock reaction at constant temperature; 3) cooling and simultaneous fluid–rock interaction. Modelling results show that the gangue and ore minerals observed at Bismark are best reproduced by fluid–rock interaction and simultaneous cooling. Results from the simulations strongly indicate that ore deposition was mainly driven by a pH increase due to the neutralization of the acidic ore fluid (pH = 3.9) as the result of the reaction with the limestone. Modelling results also suggest that the deposit likely formed under cooling conditions, but do not support the hypothesis of a temperature decrease as the principal ore-forming process.     

Identification of Self-Potential Anomalies of a Diffusion–Absorption Origin

Diffusion and adsorption (DA) potentials are frequently the sources of self-potential (SP) anomalies, but they do not arouse practical interest in contrast to anomalies of oxidation–reduction and filtration origins. DA anomalies are common and geophysicists sometimes mistakenly consider DA anomalies as examples of filtration anomalies. Identification of DA anomalies is based on correlation of SP and apparent resistivity values along the same profiles. During the student geophysical training workshop for students of the Moscow State University (Aleksandrovka village, Kaluga Region) we obtained profiles with SP and resistivity anomalies with good correlation between them. This makes it possible to consider such SP anomalies as a result of DA processes.     

The red–orange patina developed on a monumental dolostone

Orange and reddish patinas developed on a dolostone of the cathedral of Lleida (Spain) have been analysed and characterised by XRD, SEM/EDX, ICP/MS, optical microscopy and Mössbauer spectroscopy. From the experimental data, a biologically induced transformation of the dolomite rock forming crystals, which form a dolomitic patina of micrite size, can be stabilised. Furthermore, the iron oxides as determined by Mössbauer spectroscopy play a role as colouring patina, together with organic matter from the bioactivity. Erosive and constructive processes, as determined through the SEM observations, lead to aesthetical and microstructural changes in the stone surface.     

Cyclic Swell–Shrink Behaviour of a Compacted Expansive Soil

Laboratory cyclic swell–shrink tests were carried out on compacted expansive soil specimens to study in detail the effect of changes in shrinkage pattern on the swell–shrink behaviour of compacted expansive soils. Compacted soil specimens were allowed to swell and either shrank fully or partially shrank to several predetermined heights in each cycle. The tests were carried out at a surcharge pressure of 50 kPa. The test results revealed that shrinkage of compacted saturated soil specimens to predetermined height in each shrinkage cycle provides similar conditions as that of the controlled suction tests with an increasing number of swell–shrink cycles. The water content of soil specimens and hence soil suction was found to remain nearly constant for each pattern of shrinkage. For soil specimens equilibrated to a given swell–shrink pattern, suction at the end of shrinkage cycles was changed from a higher suction to a lower suction, and also from a lower to a higher suction. The experimental results showed that there may be an immediate equilibrium state attained by the soil in terms of swell–shrink potential if suction at the shrinkage cycles was less than the past suction; otherwise, the equilibrium state was accompanied by fatigue of swelling. The volumetric deformation of the soil specimen subjected greater shrinkage was found to be much larger than the corresponding vertical deformation. The compressibility index of microstructure, κ_m, was determined for several shrinkage patterns. It is shown that κ_m is heavily influenced by suction at the end of shrinkage cycles.     

Moisture–temperature changes and freeze–thaw hazards on a canal in seasonally frozen regions

Freeze–thaw action is a complex moisture–heat-mechanics interaction process, which has caused prevailing and severe damages to canals in seasonally frozen regions. Up to now, the detailed frost damage mechanism has not been well disclosed. To explore the freeze–thaw damage mechanism of the canal in cold regions, a numerical moisture–heat-mechanics model is established and corresponding computer program is written. Then, a representative canal in the northeast of China is taken as an example to simulate the freeze–thaw damage process. Meanwhile, the robustness of the numerical model and program is tested by some in situ data. Lastly, the numerical results show that there are dramatic water migration and redistribution in the seasonal freeze–thaw variation layer, causing repetitive frost heave and thaw settlement, and tension–compression stresses. Therefore, the strengths of soil are reduced after several freeze–thaw cycles. Further, the heavy denudation damage and downslope movement of the canal slope would be quite likely triggered in seasonally frozen regions. These zones should be monitored closely to ensure safe operation. As a preliminary study, the numerical model and results in this paper may be a reference for design, maintenance, and research on other canals in seasonally frozen regions.     

Hornblende–garnet–plagioclase thermobarometry: a natural assemblage calibration of the thermodynamics of hornblende

Calibrations are presented for an independent set of four equilibria between end-members of garnet, hornblende, plagioclase and quartz. Thermodynamic data from a large internally-consistent thermodynamic dataset are used to determine the ΔG° of the equilibria. Then, with the known mixing properties of garnet and plagioclase, the non-ideal mixing in amphibole is derived from a set of 74 natural garnet–amphibole–plagioclase–quartz assemblages crystallised in the range 4–13 kbar and 500–800 °C. The advantage of using known thermodynamic data to calculate ΔG° is that correlated variations of composition with temperature and pressure are not manifested in fictive derived entropies and volumes, but are accounted for with non-ideal mixing terms. The amphibole is modelled using a set of ten independent end-members whose mixing parameters are in good agreement with the small amount of data available in the literature. The equilibria used to calibrate the amphibole non-ideal mixing reproduce pressures and temperatures with average absolute deviations of 1.1 kbar and 35 °C using an average pressure–temperature approach, and 0.8 kbar with an average pressure approach. The mixing data provide not only a basis for thermobarometry involving additional phases, but also for calculation of phase diagrams in complex amphibole-bearing systems. Received: 8 November 1999 / Accepted: 7 July 2000     

Arsenic attenuation in tailings at a former Cu–W–As mine,SW Finland

Nearly half a century after mine closure, release of As from the Ylöjärvi Cu–W–As mine tailings in groundwater and surface water run-off was observed. Investigations by scanning electron microscopy (SEM), electron microprobe analysis (EMPA), synchrotron-based micro-X-ray diffraction (μ-XRD), micro-X-ray absorption near edge structure (μ-XANES) and micro-extended X-ray absorption fine structure (μ-EXAFS) spectroscopy, and a sequential extraction procedure were performed to assess As attenuation mechanisms in the vadose zone of this tailings deposit. Results of SEM, EMPA, and sequential extractions indicated that the precipitation of As bearing Fe(III) (oxy)hydroxides (up to 18.4 wt.% As₂O₅) and Fe(III) arsenates were important secondary controls on As mobility. The μ-XRD, μ-XANES and μ-EXAFS analyses suggested that these phases correspond to poorly crystalline and disordered As-bearing precipitates, including arsenical ferrihydrite, scorodite, kaňkite, and hydrous ferric arsenate (HFA). The pH within 200 cm of the tailings surface averaged 5.7, conditions which favor the precipitation of ferrihydrite. Poorly crystalline Fe(III) arsenates are potentially unstable over time, and their transformation to ferrihydrite, which contributes to As uptake, has potential to increase the As adsorption capacity of the tailings. Arsenic mobility in tailings pore water at the Ylöjärvi mine will depend on continued arsenopyrite oxidation, dissolution or transformation of secondary Fe(III) arsenates, and the As adsorption capacity of Fe(III) (oxy)hydroxides within this tailings deposit.     

Tectonic evolution of a composite collision orogen: An overview on the Qinling–Tongbai–Hong'an–Dabie–Sulu orogenic belt in central China

The formation of collisional orogens is a prominent feature in convergent plate margins. It is generally a complex process involving multistage tectonism of compression and extension due to continental subduction and collision. The Paleozoic convergence between the South China Block (SCB) and the North China Block (NCB) is associated with a series of tectonic processes such as oceanic subduction, terrane accretion and continental collision, resulting in the Qinling–Tongbai–Hong'an–Dabie–Sulu orogenic belt. While the arc–continent collision orogeny is significant during the Paleozoic in the Qinling–Tongbai–Hong'an orogens of central China, the continent–continent collision orogeny is prominent during the early Mesozoic in the Dabie–Sulu orogens of east-central China. This article presents an overview of regional geology, geochronology and geochemistry for the composite orogenic belt. The Qinling–Tongbai–Hong'an orogens exhibit the early Paleozoic HP–UHP metamorphism, the Carboniferous HP metamorphism and the Paleozoic arc-type magmatism, but the three tectonothermal events are absent in the Dabie–Sulu orogens. The Triassic UHP metamorphism is prominent in the Dabie–Sulu orogens, but it is absent in the Qinling–Tongbai orogens. The Hong'an orogen records both the HP and UHP metamorphism of Triassic age, and collided continental margins contain both the juvenile and ancient crustal rocks. So do in the Qinling and Tongbai orogens. In contrast, only ancient crustal rocks were involved in the UHP metamorphism in the Dabie–Sulu orogenic belt, without involvement of the juvenile arc crust. On the other hand, the deformed and low-grade metamorphosed accretionary wedge was developed on the passive continental margin during subduction in the late Permian to early Triassic along the northern margin of the Dabie–Sulu orogenic belt, and it was developed on the passive oceanic margin during subduction in the early Paleozoic along the northern margin of the Qinling orogen.Three episodes of arc–continent collision are suggested to occur during the Paleozoic continental convergence between the SCB and NCB. The first episode of arc–continent collision is caused by northward subduction of the North Qinling unit beneath the Erlangping unit, resulting in UHP metamorphism at ca. 480–490 Ma and the accretion of the North Qinling unit to the NCB. The second episode of arc–continent collision is caused by northward subduction of the Prototethyan oceanic crust beneath an Andes-type continental arc, leading to granulite-facies metamorphism at ca. 420–430 Ma and the accretion of the Shangdan arc terrane to the NCB and reworking of the North Qinling, Erlangping and Kuanping units. The third episode of arc–continent collision is caused by northward subduction of the Paleotethyan oceanic crust, resulting in the HP eclogite-facies metamorphism at ca. 310 Ma in the Hong'an orogen and low-P metamorphism in the Qinling–Tongbai orogens as well as crustal accretion to the NCB. The closure of backarc basins is also associated with the arc–continent collision processes, with the possible cause for granulite-facies metamorphism. The massive continental subduction of the SCB beneath the NCB took place in the Triassic with the final continent–continent collision and UHP metamorphism at ca. 225–240 Ma. Therefore, the Qinling–Tongbai–Hong'an–Dabie–Sulu orogenic belt records the development of plate tectonics from oceanic subduction and arc-type magmatism to arc–continent and continent–continent collision.