Optical dating of Holocene lake sediments: Elimination of the feldspar component in fine silt quartz samples

Optically stimulated luminescence of fine silt quartz was investigated to establish chronologies for lake sediments from the British Isles. Feldspar contamination and its potential effects on equivalent dose (D_e) determination were examined. A new feldspar contamination test based on the thermal quenching of quartz OSL and thermal assistance of feldspar OSL identified feldspar contamination in samples being treated for 20 min in 20% hydrofluoric acid. Feldspar component monitoring based on the post-IR OSL/OSL ratio was not sufficiently sensitive to monitor a feldspar component, but is a good indicator whether a standard SAR procedure can be applied successfully, despite the presence of feldspar. Based on these results we used a modified SAR protocol including a 100 s IRSL stimulation at 50 °C before OSL readout. This protocol could overcome any malign effects of feldspar even for a feldspar bearing polymineral sub-sample.     

Single grain optically stimulated luminescence dating of glacial sediments from the Baiyu Valley,southeastern Tibet

The Qinghai-Tibetan Plateau is an important area for the study of Quaternary glaciation. Optically stimulated luminescence (OSL) dating has the potential to contribute to the chronology of glaciation in this region, but it is important to assess the accuracy of OSL dating of these glacial sediments. In this study, single grain quartz OSL signals are examined for five glacial samples collected from the moraines outside the Baiyu Valley, southeastern Tibet. The quartz grains exhibit poor luminescence characteristics, with a small proportion of grains passing the screening criteria. Grains which pass the screening criteria have relatively low signal intensity, leading to D_e values with large uncertainties. MAM and CAM were used to determine D_e values for these samples. The OSL ages are consistent with the sequence of events derived from the geomorphological relationship of the samples, and also with previous published radiocarbon ages. However, it is more difficult to reconcile the OSL ages and the terrestrial cosmogenic nuclide (TCN) ¹⁰Be ages. Analysis of both single grain quartz OSL data and TCN ¹⁰Be data is complex in this area. Further work is required to increase confidence in the OSL ages generated for the glacial sediments from this region.     

Chronology of an oyster reef on the coast of Bohai Bay, China: Constraints from optical dating using different luminescence signals from fine quartz and polymineral fine grains of coastal sediments

Fossil oyster reefs are indicators of past sea levels, and their formation is usually dated by means of radiocarbon. However, radiocarbon dating of the shells from coastal areas may be complicated by the varying sources of carbon. Here we applied optical dating methods to date the samples from above and below a fossil oyster bed in a section on the coast of Bohai Bay, China. The optical ages of the sediments were used to constrain the oyster bed. Single-aliquot regenerative-dose procedures using the OSL signal from fine grain quartz, the IRSL and post-IR OSL signals from polymineral fine grains were employed to determine equivalent dose (D_e). The behaviors of the different luminescence signals from quartz and polymineral grains during D_e measurements were examined. The results showed that the quartz OSL signal is more reliable than the polymineral IRSL and post-IR OSL signals with respect to dating for these coastal samples. The optical ages indicated that the oyster reef formed between ca. 6.2 and 5.0 ka.     

OSL dating of sediments from deserts in northern China

Aeolian samples from deserts in northern China were studied using the optically stimulated luminescence (OSL) of quartz and potassium (K) feldspar separates. K-feldspar has shown advantages over quartz for dating samples younger than 100 years, due to its more homogeneous equivalent dose (D_e) values, higher internal dose rate and higher luminescence sensitivity to dose. Without additional measurements, the luminescence characteristics of quartz obtained in D_e determination procedures can be used to reveal the source material and/or quartz thermal history for the deserts in northern China. The results indicated that the duration of paleosol formation in desert areas reflects regional paleoenvironments.     

Detecting post-depositional sediment disturbance in sandy deposits using optical luminescence

Post-depositional mixing or exhumation is common in surficial sediments, yet may be unobservable from field evidence. However, any disturbance may have significant consquences in terms of establishing a reliable luminescence age determination. Optically stimulated luminescence (OSL) measurements, particularly measurements at the single grain level, can be used to gain an insight into both contemporary and past post-depositional processes.

This paper examines sites from Texas and Florida (USA) with independent chronological control to demonstrate the potential effects of varying degrees of bioturbation on OSL. Results show that contemporary soil forming processes clearly impact on the palaeodose (D_e) replicate distributions which are measured in order to derive an OSL age. Significant levels of scatter and apparently zero dose grains are observed in the upper-most sediments; declining with depth from the surface. D_e replicates from undisturbed and fully bleached sediments are unskewed, show low overdispersion (OD) and comparable single grain and single aliquot OSL ages. Bioturbated sediments, however, may show highly skewed multi-model D_e distributions with higher OD values, zero dose grains at depth, and significant diffences between single grain and single aliquot results. True burial ages may be derived from minimally bioturbated sediments through the application of statistical analysis such as finite mixture modelling to isolate D_e components. However, for significantly bioturbated sediments, the latter approach, even at the single grain level, produces inaccurate ages. In such cases we argue that additional evidence (both dating and contexual) may be required to identify with confidence the burial D_e population.     

Quartz and polymineral luminescence dating of Japanese loess over the last 0.6 Ma: Comparison with an independent chronology

There are only a few luminescence dating studies of loess sediments in Japan, but interleaved with these deposits are many well-described tephras of known age based on ¹⁴C and fission track analysis; these independent age controls provide an opportunity to test the reliability of loess luminescence ages. This study provides such a comparison at two sites in central Honshu, the largest island in the Japanese archipelago. Samples were collected from sequences of interleaved volcanic tephra and loess deposited on a Middle Pleistocene river terrace in the Niigata Prefecture and on an Early to Middle Pleistocene dissected fluvial surface at in the Tochigi Prefecture, Honshu. Equivalent doses (D_e) were estimated from fine grains (4–11 μm) using both polymineral IR-OSL and (post-IR) blue-OSL, and quartz blue-OSL. The blue-stimulated luminescence signals could be represented by up to three exponentially decaying components; only the most light sensitive of these components was used in the final D_e estimation. Almost all the estimates of D_e from polymineral IR-OSL are smaller than those from polymineral (post-IR) blue-OSL and quartz blue-OSL, whereas the latter two are in good agreement. The blue-light stimulated luminescence ages using the most light sensitive component are shown to be in good agreement with the independent control, up to 500 ka. Although the IR-OSL signals underestimate the known age, a simple laboratory fading test is found empirically to correct for this underestimation. We conclude that the most rapidly blue-stimulated luminescence signals from quartz extracted from our loess samples give reliable ages, and that future loess dating studies should concentrate on these signals.     

Resetting of sediments mobilised by the LGM ice-sheet in southern Norway

Former geological field investigations in the Rondane area, east-central southern Norway, have proposed that the maximum Fennoscandian ice-sheet coverage occurred during the Late Weichselian Glacial Maximum (LGM, ca. 20 ka) and that subsequent glaciofluvial sediments were first deposited in the early Holocene (after 10 ka). However, recent field investigations with ages from three internally consistent quartz optically stimulated luminescence (OSL) age series show an apparent deglaciation of northern Rondane in the period 20.0–13.8 ka. We examine here the possibility that these ages are too old because the sediment was not completely zeroed prior to deposition. Our investigations of incomplete bleaching use modern analogues, small aliquots, and single grains of quartz. First, the symmetric shape of small aliquot equivalent dose distributions suggests that the sediment was probably well bleached at deposition. This is supported by 5 modern analogue equivalent doses (D_e) of 0.6 Gy, 1.5% of the typical D_e from the deglaciation sediments. Finally, from single grain studies on three samples, we conclude that there is no evidence for poor bleaching in these samples; thus the weighted mean gives the best estimates of D_e, and these are completely consistent with both large and small aliquot estimates for these samples. These comparisons between large aliquots, modern analogues, small aliquots and single-grain analyses help to validate the OSL ages and confirm the complete resetting of these sediments prior to deposition.     

The effect of weathering on optically stimulated luminescence dating

Optically stimulated luminescence (OSL) dating was applied to quartz samples recovered from the gravel sediments of deformed marine terrace at the Suryum site, southeastern Korea, but has yielded stratigraphically inconsistent ages. Micromorphological, chemical, and mineralogical analyses of the gravels indicate the possible influence of chemical weathering on the apparent OSL ages. In the course of weathering after emerging from beach environments, originally permeable gravels underwent infilling by halloysite-rich clays in their voids, export and import of radioactive elements, and loss of mechanical strength with the creation of a porosity within pebbles. Calculation based on the evolution of the weathering profile showed a severe fluctuation of dose rate caused by the change of water content and radioactive element concentrations. Samples recovered from the weathering profile inevitably include quartz grains derived from mechanically weakened pebbles or illuviated from the upper layer, making it difficult to determine the equivalent dose (D_e) values of exclusively depositional quartz sands. Quantitative evaluation of the change of fabric and chemistry of the sediments on the basis of pedologic insight significantly aids in the derivation of OSL ages consistent with geomorphology and other independent age controls.     

OSL dating of glacial deposits during the Last Glacial in the Terskey-Alatoo Range, Kyrgyz Republic

Optically stimulated luminescence (OSL) dating was applied to glacial and loess deposits in the north flank of the Terskey-Alatoo Range, Kyrgyz Republic, to elucidate the glacier chronology of the central Asian mountains during the Last Glacial. Moraines in five parts of study area were classified into four stages (Terskey Stages I–IV) based on their geographical position and elevation, and their moraine rock weathering. According to this classification, the oldest moraines (Terskey Stage I) were at 2100–2250 m a.s.l. and the second-oldest moraines (Terskey Stage II) were at 2400–2700 m a.s.l. Quartz samples from moraines of these two stages were used for OSL dating. The OSL ages of the quartz samples indicate that glacier expansion in the Terskey Stage II occurred between 21 and 29 ka BP.     

Luminescence dating of marine sediments from the Sea of Japan using quartz OSL and polymineral pIRIR signals of fine grains

Luminescence dating has long been used for chronological constraints on marine sediments due to the ubiquitous dating materials (quartz and feldspar grains) and its applicability over a relatively long time range. However, one of the main difficulties in luminescence dating on marine sediments is partial bleaching, which causes age overestimations. Especially, partial bleaching is typically difficult to be detected in the fine grain fraction (FG) of marine sediments. The recently developed feldspar post-IR IRSL (pIRIR) protocol can detect non-fading signals and thus avoid feldspar signal instability. In the current study, fine grains were extracted from a gravity core in the northern Sea of Japan, and the aim is to test the feasibility of using different luminescence signals with various bleaching rates to explore the bleaching conditions of fine grain fraction in marine sediments. The results suggest that the quartz OSL signal and polymineral pIRIR signals at stimulation temperatures of 150 °C and 225 °C (pIRIR₁₅₀ and pIRIR₂₂₅) of FG were well bleached prior to deposition. The OSL ages were used to establish a chronology for this sedimentary core and the resulting age-depth relationship is self-consistent and comparable with radiocarbon dates. We conclude that different luminescence signals with various bleaching rates can be used to test the bleaching conditions of fine grain fraction in marine sediments; and the luminescence dating can be applied to marine sediments with great potential.     

ESR dating of sedimentary quartz: Possibilities and limitations of the single-grain approach

Usually, multiple-grain aliquots are used for electron spin resonance (ESR) dating of sediments. However, this approach excludes the ability of detecting insufficient bleaching, as would be the case when measuring several single aliquots or single grains. In this paper, we present preliminary results of single-grain ESR dating experiments on three different sedimentary deposits (fluvial, fluvio-aeolian and desert aeolian), ranging in age between 100 ka and 2 Ma. Titanium-related impurity centres (Ti–Li and Ti–H) were measured in a Q-band ESR spectrometer for estimating equivalent doses (D_e) of individual quartz grains (0.5–1 mm). Both additive and regenerative dose methods were used. The resulting D_e plots show a large scatter in D_e—from 100 Gy to more than 600 Gy—for the fluvial sample, probably reflecting different bleaching histories of the grains. On the contrary, a clear plateau can be observed in D_e for sands with a strong aeolian component. Preliminary single-grain ESR ages are in relatively good agreement with independent estimates, the best results being obtained for the desert aeolian sample (200 ka). It is concluded that ESR has a promising potential for estimating large naturally accumulated doses of well-bleached sediments. Nevertheless, the method is challenged by several experimental difficulties, such as long measurement times, excessive errors, and presumably a complex interrelationship between Ti–Li and Ti–H components.     

Assessing paraglacial processes at Nexpayantla Gorge (Popocatépetl volcano,Central Mexico) using OSL and 14C

We evaluate the paraglacial activity in Nexpayantla, a subtropical mountainous gorge in Popocatépetl volcano (Central Mexico), fully deglaciated in the 20th century. Glacial advances are evidenced by the presence of moraines. Fluvio-glacial terraces and an alluvial megafan resulted from the gorge deglaciation. Current reworking of the glacigenic material is done by landslides and debris flows produced on the moraines and terraces. To study the different phases of mobilization of glacigenic sediment, we used an approach based on the study of the optically stimulated luminescence (OSL) signals obtained from a portable OSL (POSL) reader in samples extracted from both glacigenic and paraglacial deposits. The luminescence (POSL) results obtained at moraines increase as altitude decreases, which is expected for deglaciated valleys where the oldest moraines are located at lower elevations. We evaluate the grade of luminescence signal reset of the glacigenic sediments during the proglacial stage, and the subsequent deglaciation phases. Our results indicate that there is a marked transition between glacial and fluvially dominated processes at Nexpayantla Gorge. We find that the grade of luminescence signal resetting in the paraglacial deposits is a good indicator to trace paraglacial stages and the beginning of exhaustion of the paraglacial activity in mountain areas. OSL ages confirm that the oldest fluvio-glacial terraces found at the middle sector of Nexpayantla Gorge are ~2 ka, which is also supported by an AMS ¹⁴C age. OSL dating was found challenging, since quartz grains have low sensitivity because of their volcanic origin; POSL signals, however, are in good agreement with the location and distribution of geomorphic markers. We propose that luminescence data obtained from the POSL unit can be useful to provide information about sediment mobilization in paraglacial environments during different climatic pulses – even for the case where mineral grains have low sensitivity, such as in volcanic sediments. © 2020 John Wiley & Sons, Ltd.     

Potential of quartz OSL dating on moraine deposits from eastern Tibetan Plateau using SAR protocol

Optically stimulated luminescence (OSL) dating methods have been widely applied in Quaternary glaciology. However, glacigenic deposits are considered in general as problematic for OSL dating, mainly because they are transported shorter distances prior to burial and are usually partially bleached. Thus, most researchers choose glaciofluvial and glaciolacustrine sediments (with relatively longer transportation times) for OSL dating when constraining the age of glaciation. In this study, four samples were collected from a lateral moraine series at Zhuqing Village, northern margin of Queer Shan Mountain, eastern Tibetan Plateau, in order to investigate the applicability of OSL dating for morainic deposits. Quartz grains (38–63 μm) were extracted and measured using single aliquot regenerative-dose (SAR) protocol. Internal checks and dose recovery test show that the SAR protocol is appropriate for equivalent dose (D_e) determination. The effect of thermal transfer is small for all samples and the recycling ratio for each individual sample is close to unity. The symmetry in the D_e distributions indicates that quartz grains were well-bleached prior to burial. OSL ages show good agreement with geomorphological and field investigations, and are also concordant with an independent ESR age. It is concluded that: (a) the morainic deposits in Zhuqing were well-bleached and suitable for OSL dating; (b) SAR protocol can be applied to morainic deposits for samples under study.     

OSL and IRSL dating of raised beach sand deposits along the southeastern coast of Norway

Raised beach sand deposits along the southeastern coast of Norway were dated by optical (OSL) and infrared stimulated luminescence (IRSL) and the quartz and K-feldspar luminescence characteristics were described. Due to the poor quartz luminescence characteristics, only a limited number of samples were suitable for OSL dating. More promising are the K-feldspar extracts, with typical K-feldspar luminescence characteristics and no sign of fading. For equivalent dose (D_e) determination, sand-size quartz and feldspar extracts were used, applying a single aliquot regenerative (SAR) protocol. Both, OSL and IRSL D_e estimates show a wide distribution, unexpected for beach deposits. The calculated OSL and IRSL age estimates were generally in good agreement and the correctness of the ages was confirmed by independent age control. Because only a limited number of the quartz samples were suitable for OSL dating, IRSL dating of the K-feldspar represents an alternative to OSL quartz dating.     

Devensian glacial events in Buchan (NE Scotland): A progress report on new OSL dates and their implications

Optically stimulated luminescence (OSL) dating of a series of glaciofluvial/glaciodeltaic sediments in central Buchan and Aberdeen has recently been undertaken. The aims of this project are to test the chronological model proposed by the most recent regional review and the suggestion that parts of Buchan may have remained ice-free during the last glacial maximum (late marine isotope stage (MIS) 3 and MIS 2 29–15 ka). The preliminary results indicate that during the Devensian (ca. 116–12 ka), extensive areas of Buchan may have been glaciated earlier than previously believed (possibly during MIS 4, 72–60 ka), but parts of the region show no depositional evidence of later glaciation. Some waterlain sediments from the Ugie Valley have yielded OSL ages indicating deposition during MIS 5d to MIS 5a (116–72 ka). We discuss whether the absence of overlying glaciogenic sediments at these locations raises questions about the reliability of the OSL ages or about existing models of the Devensian glaciation of Buchan.     

RESIDUAL POST-IR IRSL SIGNALS OF POTASSIUM FELDSPAR FROM MODERN SAG POND DEPOSITS OF CENTRAL ALTYN TAGH FAULT: IMPLICATION FOR DATING YOUNG PALEOSEISMIC EVENTS

The Altyn Tagh Fault(ATF)is one of the most prominent active strike-slip faults in the India-Eurasia collision. Fresh features of surface ruptures, which are attributed to seismic events taking place in the last millennium, are identified at several sites along the Che'erchen River to Qingshui River section on the central part of ATF. Accurate chronology of these earthquake events would help understand the spatial-temporal relationship of the recent earthquakes. However, great difficulties are encountered. The central ATF is located in the arid area, and the vegetation cover is so limited that rare organic materials appropriate for radiocarbon dating can be found in the sediments. Luminescence dating technique may serve as an alternative to directly determine the burial ages of the earthquake related sediments. The optically stimulated luminescence(OSL)signal of quartz, which has been widely employed for luminescence dating, displays unwanted charateristics for accurate dating. Firstly, the quartz OSL signal is not sensitive to irradiation, which leads to low signal-to-noise ratio or even no measurable quartz OSL signal. Secondly, the targeted samples of the last millennium are very young, and the radiation dose received during the burial is expected to be less than 3~4Gy, which futher deteriorates the signal-to-noise ratio of the quartz OSL signal. Therefore, quartz OSL signal is not appropriate for dating the sediments relevant to the recent earthquakes on ATF.
The infrared stimulated luminescence(IRSL)signal of potassium feldspar is an alternative, and it is in usual an order of maginitude more sensitive to raidation than the quartz OSL signal. The enhanced signal-to-noise ratio makes it applicable to young samples. The post-IR IRSL signal has been successfully applied to date the sediments beyond the Holocene, however, the relatively slow bleaching of the post-IR IRSL signal poses challenges on applying it to young sediments, especially for the sediments deposited during the last millennium. In this study, we investigated the feasibility of using post-IR IRSL signal from potassium feldspar to date the earthquake events of the last millennium by employing modern sag pond deposits with different sorting and expected equivalent dose(D_e)of 0Gy. Choosing an appropriate measurement procedure and identifying the well bleached pottassium feldspar grains are essential for post-IR IRSL dating of young sediments. The non-fading characteristic of the post-IR IRSL₁₇₀ signal measured at 170℃ following a prior IR stimulation at 110℃ was verified by employing the D_e plateau test with respect to the signal integration interval and IR stimulation temperature together. Reducing the amount of potassium feldspar grains mounted on an aliquot would help reveal the among grains variation of bleaching level of post-IR IRSL₁₇₀ signal before depostion and identify the most sufficiently bleached grains. Therefore, the post-IR IRSL₁₇₀ D_e values of 2mm aliquots were measured for three samples with different sedimentary textures. The median of D_e distribution of well sorted and stratified sag pond deposits is consistent with the minimum D_e value inferred from the minimum age model(MAM-3) and finite mixture model(FMM), while for the poorly sorted deposits, the median is significantly overestimated compared with the minimum D_e values from the MAM-3 and the FMM. The minimum D_e values of 0.6~0.8Gy of all three samples are consistent with the unbleachable residual dose previously reported for post-IR IRSL signals measured at similar temperature for well bleached samples. It implies that by combined use of small aliquot and statistical age models, the well-bleached potassium feldspar grains could be identified. Such an intrinsic unbleachable component needs to be properly corrected when earthquake events of last millennium are to be dated in this area. Otherwise, the post-IR IRSL₁₇₀ age would be overestimated by 200~300a.
The post-IR IRSL₁₇₀ procedure investigated in this study is not only applicable for dating the paleoearthquake events along the Altyn Tagh Fault, but also with great potential to be applied to other tectonically active area. With consideration of the potential variability in post-IR IRSL signal characteristics of potassium feldspar grains from different origins, the signal stability needs to be routinely inspected. The modern analog sample would also be informative for justifying the measurement procedure and analytical method employed.     

Testing the application of quartz and feldspar luminescence dating to MIS 5 Japanese marine deposits

The applicability of both quartz and feldspar luminescence dating was tested on twenty-five samples from a marine succession now forming a coastal cliff at Oga Peninsula, Honshu Island, Japan. The quartz optically stimulated luminescence (OSL) signal shows thermal instability and linear modulated (LM)-OSL analysis revealed the dominance of a slow component. When compared with independent age control provided by two marker tephras, the quartz OSL ages grossly underestimate the depositional age. In contrast, potassium (K)-rich feldspar is a suitable dosimeter when measured using post-IR infrared stimulated luminescence (IRSL) at 225 °C (pIRIR₂₂₅). Scanning electron microscope (SEM) analyses on the feldspar extracts revealed that the grains are amorphous with small crystalline inclusions; using standard internal dose rate parameters, this would result in a too large dose rate. Dose rates were calculated using the observed grain size of 40 ± 20 μm with an assumed K concentration of 12.5 ± 0.5%. The fading corrected pIRIR₂₂₅ ages agree well with independent age control, and the sediments of the Katanishi Formation were deposited between 82 ± 6 and 170 ± 16 ka. This study demonstrates that pIRIR dating of feldspar is a powerful chronological tool for the dating of sediments of volcanic origin.     

Validating post IR-IRSL dating on K-feldspars through comparison with quartz OSL ages

Recent developments have opened up the possibilities of using potassium feldspar for dating Pleistocene sediments; a stable (less-fading) part of the infrared stimulated luminescence (IRSL) signal can be selected by largely depleting the unstable part of the IR signal, using a combination of thermal and IR stimulation: post IR-IRSL dating (pIR-IRSL).This study aims to test the validity of pIR-IRSL dating on feldspars. We obtained pIR-IRSL ages on a large suite of samples from several locations in the Netherlands area, covering a wide range of depositional environments and ages. Age control was provided by quartz optically stimulated luminescence (OSL) ages on the same samples; these ages were shown to accord with geological age constraints. Comparison with IRSL ages enabled us to evaluate the improvement that pIR-IRSL dating provides over conventional IRSL methods.The majority of feldspar ages obtained with pIR-IRSL showed good agreement with both the quartz OSL ages and the geological age constraints. Our study demonstrates that pIR-IRSL dating is more robust than conventional IRSL and should be the method of choice in feldspar luminescence dating of Pleistocene sediments.     

Assessing the potential of luminescence dating for fault slip rate studies on the Garlock fault,Mojave Desert,California, USA

Although there has been significant advancement of OSL (optically stimulated luminescence) dating of quartz and feldspar over the past decade, the luminescence characteristics of quartz grains in many tectonically active areas are not suitable for accurate age determinations using this technique. This study investigates the reasons for this unsuitability and tests a new measurement protocol (ITL), which appears more promising. At two sites along the central Garlock fault in the Mojave Desert, California, USA, samples collected for OSL dating for this study have proven problematic. At the El Paso Peaks (EPP) trench site, a sequence of OSL samples was collected from sandy units with a well-established radiocarbon chronology, providing the opportunity to assess different approaches and optimize our luminescence dating procedures. At Christmas Canyon West (CCW), where future Garlock fault slip rate studies will be conducted using luminescence dating, samples were collected to assess the luminescence characteristics of both quartz and feldspar in this environment. At both sites, signals from quartz and K-feldspar grains are consistently dim. At EPP, quartz results provide age underestimates, while K-feldspar IRSL yields erratic values; the causes of this problematic behavior are unclear. Preliminary minimum isothermal thermoluminescence (ITL) signals of K-feldspar measured during preheating appear to be consistent with the radiocarbon age estimates, demonstrating potential for accurate age determination in this kind of environment using this protocol.     

Luminescence signals from modern sediments in a glaciated bay,NW Svalbard

Landforming processes are highly active in the Arctic, and luminescence dating can be used to establish a chronological framework for these processes. For example, luminescence ages of raised littoral and marine deposits provide the age control for many reconstructions of Pleistocene events in the Arctic. Due to the nature of the depositional environment (e.g. short transport distance, turbid water, long polar night) these types of sediment may not be completely zeroed at the time of deposition. To test the significance of incomplete bleaching in this type of environment, surface sediments were sampled along a transect from the margin of a glacier out into a nearby bay on NW Svalbard. The water in the bay is very turbid (secchi depth 0.1 m), but there is significant reworking by waves along the shores.Quartz optically stimulated luminescence (OSL) and feldspar infrared stimulated luminescence (IRSL) were measured using sand-sized grains. For quartz OSL and feldspar IRSL (50 °C) the ice-proximal sample showed relatively high doses (∼12 Gy) while nearby beach sand and shallow-marine deposits, as well as ice-distal sandur sediments, had much lower doses: most OSL doses were consistent with zero, while IRSL (50 °C) ranged from 0.5 to 6.5 Gy. Post-IR IRSL (290 °C) doses were overall much higher (∼20–55 Gy), which partly is due to a significant (∼12 Gy) unbleachable residual, and partly due to slower bleaching rates than for the IRSL (50 °C) signal.In this Arctic environment it appears that bleaching is limited in the first ∼100 m of meltwater transport from the glacier margin, but for material transported at least 3 km bleaching of OSL and IRSL (50 °C) signals is more or less complete. Given the very limited light penetration through the seawater in the bay, any bleaching must have occurred during fluvial/subaerial transport to the bay or by wave-reworking on the beach. Apart from the ice-proximal glacifluvial sediments, residual apparent doses recorded by quartz OSL and feldspar IRSL (50 °C) are negligible for the luminescence dating of Pleistocene-aged deposits of ice-distal, littoral and shallow-marine origin.