应用剪切波速判别砂土液化的研究综述

首先介绍了应用剪切波速判别饱和砂土振动液化的原理；然后从临界剪应变取值、砂土的抗液化能力与剪切波速相关关系的研究方法与设备、用剪切波速进行扰动评价、建立适用于不同土类的统一判别式四方面总结了国内外学者在该领域的一些研究成果及存在问题；最后针对以上问题提出作者的一些看法。     

Study of the liquefaction resistance of a saturated sand reinforced with Geosynthetics

This article presents various tests using a cyclic triaxial instrument, on samples of saturated Hostun RF sand, reinforced with circular sheets of geosynthetic material. Tests performed with different types of geosynthetics of different compressibility, rigidity and roughness characteristics indicate a significant increase in liquefaction resistance for samples reinforced with compressible, non-woven geotextiles. The undrained behaviour of saturated Hostun RF sand reinforced with non-woven geotextiles is analysed on the basis of different test series. This analysis highlights the influence of reinforcement compressibility on interstitial pressure distribution in the sample, thus showing the role of this type of inclusion in the increase in liquefaction resistance.     

Requirements for soil-specific correlation between shear wave velocity and liquefaction resistance of sands

The application of the simplified method for evaluating the liquefaction potential based on shear wave velocity measurements has increased substantially due to its advantages, especially for microzonation of liquefaction potential. In the simplified method, a curve is proposed to correlate the cyclic resistance ratio (CRR) with overburden stress-corrected shear wave velocity (V_s1). However, the uniqueness of this curve for all types of soils is questionable. The objective of this research is to study whether the correlation between CRR and V_s1 is unique or not. Besides, the necessity of developing the soil-specific correlations is also investigated. Based on laboratory test data, a new semi-empirical method is proposed to establish the soil-specific CRR–V_s1 correlation. To validate the proposed method, a number of undrained cyclic triaxial tests along with bender element tests were performed on two types of sands. Similar experimental data for six other types of sands reported in the literature was also compiled. Applying the proposed method, soil-specific CRR–V_s1 correlation curves were developed for these eight types of sands. It is shown that the correlation is not unique for different types of sands and the boundary curve proposed in the available simplified method can only be used as an initial estimation of liquefaction resistance. Finally, using the results of this study as well as previous ones, a chart is suggested to be used in engineering practice showing the conditions for which a detailed soil-specific CRR–V_s1 correlation study needs to be performed.     

Predicting seismic liquefaction potential of sands by optimum seeking method

The feasibility of using the optimum seeking method to assess the seismic liquefaction potential of sands has been investigated. Optimization theory is a very important branch of applied mathematics and has a wide application in the practical world. Using the available field sand liquefaction data, the influence of various factors is quantified using the optimum seeking method. The factors considered are: the earthquake magnitude M, the distance of the site from the source of the earthquake L, the depth of the water table D_w, the depth of the sand deposit D_s, and the standard penetration test (SPT) blow count N. The most important factors have been identified as the earthquake magnitude and the SPT blow count. Prediction results show that the proposed method is effective and feasible. Since neither normalization of the SPT blow count nor calculation of the seismic shear-stress ratio are required, the proposed method is simpler and more direct than the conventional methods of evaluating liquefaction potential.     

Correlation of shear wave velocity with liquefaction resistance based on laboratory tests

According to the results of cyclic triaxial tests on Hangzhou sands, a correlation is presented between liquefaction resistance and elastic shear modulus. Material-dependent but independent of confining stress, shows the linear relation of (σ_d/2)^1/2 with G_max. For its application to different soils, a method proposed by Tokimatsu [Tokimatsu K, Uchida A. Correlation between liquefaction resistance and shear wave velocity. Soils Found 1990:30(2):33–42] is utilized to normalize the shear modulus with respect to minimum void ratio. A simplified equation is established to evaluate the liquefaction potential by shear-wave velocity. The critical shear-wave velocity of liquefaction is in linear relation with 1/4 power of depth and the peak horizontal ground surface acceleration during earthquakes. The equation proposed in this paper is compared with previous methods especially the procedure proposed by Andrus [RD Andrus, KH Stokoe. Liquefaction resistance of soils from shear-wave velocity. J Geotech Geoenviron Eng 2000:126(11):1015–25]. The results show its simplicity and effectiveness when applied to sands, but more validation or modification is needed for its application to sand with higher fines content.     

A fundamental procedure and calculation formula for evaluating gravel liquefaction

Field investigations following the 2008 Ms8.0 Wenchuan earthquake identified 118 liquefaction sites, most of which are underlain by gravelly sediment in the Chengdu Plain and adjacent Mianyang area, in the Sichuan Province. Gravel sediment in the Sichuan province is widely distributed; hence it is necessary to develop a method for prediction and evaluation of gravel liquefaction behavior. Based on liquefaction investigation data and in-situ testing, and with reference to existing procedures for sandy soil liquefaction evaluation, a fundamental procedure for gravel liquefaction evaluation using dynamic penetration tests (DPT) is proposed along with a corresponding model and calculation formula. The procedure contains two stages, i.e., pre-determination and re-determination. Pre-determination excludes impossible liquefiable or non-liquefiable soils, and re-determination explores a DPT-based critical N120 blows calculation model. Pre-determination includes three criteria, i.e., geological age, gravel contents, gravel sediment depths and water tables. The re-determination model consists of five parameters, i.e., DPT reference values, gravel contents, gravel sediment depths, water tables and seismic intensities. A normalization method is used for DPT reference values and an optimization method is used for the gravel sediment depth coefficient and water table coefficient. The gravel liquefaction evaluation method proposed herein is simple and takes most influencing factors on gravel sediment liquefaction into account.     

黄河三角洲粉土液化的试验研究

在野外自然地理和地质调查的基础上，以黄河地区可液化场地粉土为研究对象，利用室内动三轴和振动柱试验进行测定，分析了动荷载作用下粉土的动应力应变关系并模拟了地震荷载作用下粉土的孔压响应及抗液化强度，得出了液化破坏标准，提出了原状粉土的振动孔压上升模型。对试验结果进行分析发现，随着粘粒含量的增加，粉砂、粉土、粉质粘土、粘土达到相同剪应变所需的动剪应力也依次增加；粉土孔压比0．68、粉砂土孔压比0．87作为液化破坏开始的标志；粉土发生液化所需的循环应力比大于砂土。这些研究为以后建立适合本地区的饱和地基土地震破坏判别方法提供了参数和依据。     

A fundamental procedure and calculation formula for evaluating gravel liquefaction

Field investigations following the 2008 Ms8.0 Wenchuan earthquake identified 118 liquefaction sites, most of which are underlain by gravelly sediment in the Chengdu Plain and adjacent Mianyang area, in the Sichuan Province. Gravel sediment in the Sichuan province is widely distributed; hence it is necessary to develop a method for prediction and evaluation of gravel liquefaction behavior. Based on liquefaction investigation data and in-situ testing, and with reference to existing procedures for sandy soil l...     

A practical reliability-based method for assessing soil liquefaction potential

The current simplified methods for assessing soil liquefaction potential use a deterministic safety factor in order to judge whether liquefaction will occur or not. However, these methods are unable to determine the liquefaction probability related to a safety factor. An answer to this problem can be found by reliability analysis. This paper presents a reliability analysis method based on the popular Seed'85 liquefaction analysis method. This reliability method uses the empirical acceleration attenuation law in the Taiwan area to derive the probability density distribution function (PDF) and the statistics for the earthquake-induced cyclic shear stress ratio (CSR). The PDF and the statistics for the cyclic resistance ratio (CRR) can be deduced from some probabilistic cyclic resistance curves. These curves are produced by the regression of the liquefaction and non-liquefaction data from the Chi-Chi earthquake and others around the world, using, with minor modifications, the logistic model proposed by Liao [J. Geotech. Eng. 114 (1988) 389]. The CSR and CRR statistics are used in conjunction with the first order and second moment method, to calculate the relation between the liquefaction probability, the safety factor and the reliability index. Based on the proposed method, the liquefaction probability related to a safety factor can be easily calculated. The influence of some of the soil parameters on the liquefaction probability can be quantitatively evaluated.     

徐州市棠张镇饱和粉土液化性能试验研究

徐州市棠张镇高速铁路路基的粉土粘粒含量少于1．5％、粉粒含量约为80％,在强烈地震作用下存在着液化可能性,为了分析该路基粉土的液化特性,进行了多组振动三轴液化试验。对试验结果进行分析发现,该地区的粉土振动孔压发展模式与Seed提出的用反正弦三角函数拟合的砂十振动孔压发展模式不同,可以用双曲线进行拟合。采用最大往返剪切作用面上的应力条件确定了该地区的孔压发展模式的拟合参数,为该地区粉土地震液化动力计算分析提供了所需的地震孔隙水压力增长模型。同时,本文指出粉土的密度和结构是振动孔压发展的重要影响因素。     

饱和粉土液化和应变特性试验研究

对取自徐州市棠张镇拟建京沪高速铁路路基的粉土,在试验室内按不同的干密度和细粒含量进行重塑,完成了三组不同干密度和四组不同细粒含量的振动三轴液化试验。分析了粉土干密度和细粒含量对饱和粉土抗液化强度的影响;通过曲线拟合方法建议了粉土振动液化过程中的孔压增长模型和永久应变势模型,给出了模型参数。     

Seismic liquefaction potential assessment by using Relevance Vector Machine

Determining the liquefaction potential of soil is important in earthquake engineering. This study proposes the use of the Relevance Vector Machine (RVM) to determine the liquefaction potential of soil by using actual cone penetration test (CPT) data. RVM is based on a Bayesian formulation of a linear model with an appropriate prior that results in a sparse representation. The results are compared with a widely used artifi cial neural network (ANN) model. Overall, the RVM shows good performance and is proven to be more accurate than the ANN model. It also provides probabilistic output. The model provides a viable tool for earthquake engineers to assess seismic conditions for sites that are susceptible to liquefaction.     

The use of MASW method in the assessment of soil liquefaction potential

The multi-channel analysis of surface wave (MASW) method is a non-invasive method recently developed to estimate shear wave velocity profile from surface wave energy. Unlike conventional SASW method, multi-station recording permits a single survey of a broad depth range and high levels of redundancy with a single field configuration. An efficient and unified wavefield transform technique is introduced for dispersion analysis and on site data quality control. The technique was demonstrated in the assessment of soil liquefaction potential at a site in Yuan Lin, Taiwan. The shear wave velocity and liquefaction potential assessments based on MASW method compares favorable to that based on SCPT shear wave measurements. Two-dimensional shear wave velocity profiles were estimated by occupying successive geophone spreads at several sites in central western Taiwan, at some of which sand boils or ground cracks occurred during 1999 Chi Chi earthquake. Liquefaction potential analysis based on MASW imaging was shown to be effective for estimating the extent of potential liquefaction hazard.     

考虑非线性的建筑物地基地震液化简化分析方法

本文在建筑物地基地震液化总应力简化判别方法的基础上，考虑地基土壤的剪切非线性及饱和砂土Martin非线性孔压增长模型，提出了估计建筑物地基孔压增长的简化分析方法，这一方法可用来判别地基的初始液化问题。     

改进的判别砂土液化势的剪切波速法

依据动三轴试验,提出Gmax(kPa)与（sd/2）1/2(kPa) 1/2成线性关系,并且对于不同地区的砂土,能够根据emin进行初步归一,从而提出了适用于一般砂土的简化临界剪切波速公式．该公式明确体现出临界剪切波速与深度、地震加速度等成1/4次方关系,采用它能够合理地解释液化可能性随深度增加而减少的现象．通过与其他学者提出的方法以及动三轴试验结果的对比表明,本文的方法简单而有效．     

Shear-wave splitting in the crust: Regional compressive stress from polarizations of fast shear-waves

When propagating through anisotropic rocks in the crust, shear-waves split into faster and slower components with almost orthogonal polarizations. For nearly vertical propagation the polarization of fast shearwave (PFS) is parallel to both the strike of the cracks and the direction of maximum horizontal stress, therefore it is possible to use PFS to study stress in the crust. This study discusses several examples in which PFS is applied to deduce the compressive stress in North China, Longmenshan fault zone of east edge of Tibetan plateau and Yunnan zone of southeast edge of Tibetan plateau, also discusses temporal variations of PFS orientations of 1999 Xiuyan earthquake sequences of northeastern China. The results are consistent to those of other independent traditional stress measurements. There is a bridge between crustal PFS and the crustal principal compressive stress although there are many unclear disturbance sources. This study suggests the PFS results could be used to deduce regional and in situ principal compressive stress in the crust only if there are enough seismic stations and enough data. At least, PFS is a useful choice in the zone where there are a large number of dense seismic stations.     

含微生物气泡高饱和砂土循环三轴剪切CFD-DEM模拟

为探究砂土液化的微观机理,根据室内试验中微生物反硝化反应气泡的生成速率,建立数值模拟的时效性关系,分别制取微生物处理0天、2天、3天和5天的高饱和砂土试样,采用CFD-DEM耦合方法模拟不同工况下砂土试样的循环三轴不排水剪切试验.依据砂土试样的力链分布、抗液化振次、孔压比、轴向应变和力学配位数在加载过程中的变化情况,从...     

Inversion of shear wave interval velocity on prestack converted wave data

Seismic velocity is important to migration of seismic data,interpretation of lithology and lithofacies as well asprediction of reservoir.The information of shear wave velocity is required to reduce the uncertainty for discrimi-nating lithology,identifying fluid type in porous material and calculating gas saturation in reservoir prediction.Based on Zoeppritz equations,a numeral and scanning method was proposed in this paper.Shear wave velocitycan be calculated with prestack converted wave data.The effects were demonstrated by inversion of theoreticaland real seismic data.     

某长江大桥深度超过15米的砂土层液化势的综合评价

不同抗震设计规范的砂土液化判别方法或国内外其他有代表性的液化判别方法所采用的地震动参数和土性指标及其埋藏条件是不同的,因而采用这些方法对同一工程场地进行液化势预测时其评价结果通常有一些差异,甚至会得到相反的结论。为了给重大工程建设提供较为合理、可信的地基液化势预测结果,采用多种液化判别方法进行场地液化势的综合评价是比较客观的,也是必要的。本文结合某长江大桥桥基工程,采用建筑抗震设计规范的砂土液化判别方法、国内外有代表性的液化判别方法、有限元数值分析法等多种方法逐一对该工程场地砂性土层进行液化判别,并结合室内动三轴液化试验结果,对主桥墩不考虑冲刷条件和考虑一般冲刷深度5m条件时的砂性土层进行了液化势的综合评价,并将各土层的液化势分为液化、可能液化和不液化3个等级,得到了较为合理可靠的判别结果。     

基于平均速度分析的近地表纵波速度反演

面波频散曲线对于横波速度、纵波速度、层厚等近地表地球物理参数的敏感度相差较大, 现阶段通过频散曲线可以获得较为精确的近地表横波速度与厚度信息, 但无法直接对纵波速度进行反演.研究表明, 泊松比对于波长(W)-探测深度(D)关系较为敏感.基于这一发现, 本文根据频散曲线与反演获取的横波速度结构计算平均速度, 获取W-D关系曲线.但合成数据测试证明, 因近地表浅层对应的W-D曲线变化较小, 且浅层纵波速度反演不准确会使误差累积, 直接反演W-D曲线无法获取可靠的纵波速度剖面.本文改进了基于平均速度分析的近地表纵波速度反演方法, 在目标函数中加入了对浅层信息较为敏感的W/D-D信息, 同时对W-D曲线与W/D-D曲线进行联合反演.合成数据测试证明可以获取较为准确地浅层与深层纵波速度.将该方法应用于实际地震数据中, 联合反演得到的纵波速度剖面与微测井数据较为吻合, 证明本文提出的方法可以不借助其他信息, 仅通过面波频散信息, 获取更为准确地近地表纵波信息.