Middle Eocene‐Oligocene broken‐foreland evolution in the Andean Calchaqui Valley,NW Argentina: insights from stratigraphic,structural and provenance studies

Two end‐member models have been proposed for the Paleogene Andean foreland: a simple W‐E migrating foreland model and a broken‐foreland model. We present new stratigraphic, sedimentological and structural data from the Paleogene Quebrada de los Colorados (QLC) Formation, in the Eastern Cordillera, with which to test these two different models. Basin‐wide unconformities, growthstrata and changes in provenance indicate deposition of the QLC Formation in a tectonically active basin. Both west‐ and east‐vergent structures, rooted in the basement, controlled the deposition and distribution of the QLC Formation from the Middle Eocene to the Early Miocene. The provenance analysis indicates that the main source areas were basement blocks, like the Paleozoic Oire Eruptive Complex, uplifted during Paleogene shortening, and that delimits the eastern boundary of the present‐day intraorogenic Puna plateau. A comparison of the QLC sedimentary basin‐fill pattern with those of adjacent Paleogene basins in the Puna plateau and in the Santa Bárbara System highlights the presence of discrete depozones. These reflect the early compartmentalization of the foreland, rather than a stepwise advance of the deformation front of a thrust belt. The early Tertiary foreland of the southern central Andes is represented by a ca. 250‐km‐wide area comprising several deformation zones (Arizaro, Macón, Copalayo and Calchaquí) in which doubly vergent or asymmetric structures, rooted in the basement, were generated. Hence, classical foreland model is difficult to apply in this Paleogene basin; and our data and interpretation agree with a broken‐foreland model.     

Tectono‐sedimentary evolution of the western Corinth rift (Central Greece)

The Corinth rift (Greece) is one of the world's most active rifts. The early Plio‐Pleistocene rift is preserved in the northern Peloponnese peninsula, south of the active Corinth rift. Although chronostratigraphic resolution is limited, new structural, stratigraphic and sedimentological data for an area >400 km² record early rift evolution in three phases separated by distinct episodes of extension rate acceleration and northward fault migration associated with major erosion. Minimum total N–S extension is estimated at 6.4–7.7 km. The earliest asymmetrical, broad rift accommodated slow extension (0.6–1 mm a^?1) over >3 Myrs and closed to the west. North‐dipping faults with throws of 1000–2200 m defined narrow blocks (4–7 km) with little footwall relief. A N‐NE flowing antecedent river system infilled significant inherited relief (Lower group). In the earliest Pleistocene, significant fluvial incision coincided with a 15 km northward rift margin migration. Extension rates increased to 2–2.5 mm a^?1. The antecedent rivers then built giant Gilbert‐type fan deltas (Middle group) north into a deepening lacustrine/marine basin. N‐dipping, basin margin faults accommodated throws <1500 m. Delta architecture records initiation, growth and death of this fault system over ca. 800 ka. In the Middle Pleistocene, the rift margin again migrated 5 km north. Extension rate increased to 3.4–4.8 mm a^?1. This transition may correspond to an unconformity in offshore lithostratigraphy. Middle group deltas were uplifted and incised as new hangingwall deltas built into the Gulf (Upper group). A final increase to present‐day extension rates (11–16 mm a^?1) probably occurred in the Holocene. Fault and fault block dimensions did not change significantly with time suggesting control by crustal rheological layering. Extension rate acceleration may be due to strain softening or to regional tectonic factors.     

Erosion surfaces and Neogene landscape evolution in the NE Duero Basin (north-central Spain)

We present a chronological model of erosion surface development in the Iberian and Cantabrian Ranges of north-central Spain. We map four erosion surfaces and interpret these to be related to Duero basin continental sediments and tectonic activity from Upper Oligocene to Plio-Pleistocene. The oldest erosion surface, SE1, formed across Upper Oligocene–Lower Miocene synorogenic deposits; while surface SE2 was contemporaneous with the Middle Miocene alluvial systems, ending with an uplift stage in the Astaracian. The two most recent erosion surfaces, SE3 and SE4, developed during extensional tectonic episodes and are associated with the deposition of Upper Páramo sedimentary units at the end of the Miocene (Upper Turolian) and alluvial fan deposits, known as rañas (Plio-Pleistocene). With the exception of SE1, which seems to be associated with a relatively wet climate, the surfaces formed during periods of marked aridity and generally warm temperatures. Through geostatistical reconstruction of the best preserved surface (SE2), applying ordinary kriging method to the topography (DEM) of the erosion surface and its correlating sedimentary plains, we identify the deformation processes which occurred on this surface after its formation.     

Tectonics of the Xining Basin in NW China and its implications for the evolution of the NE Qinghai‐Tibetan Plateau

The continuous Cenozoic strata in the Xining Basin record the growth and evolution of the northeastern Qinghai–Tibetan Plateau. Here, the mechanisms and evolution of the Xining Basin during the Cenozoic were investigated by studying the sedimentary facies of 22 Cenozoic sections across the basin and detrital zircon U‐Pb ages of three Cenozoic sections located in the eastern, central and western basin, respectively. In the Eocene (ca. 50–44 Ma), the India‐Eurasia Collision affected the northeastern Qinghai–Tibetan Plateau. The Central Qilian Block rotated clockwise by ca. 24° to form the Xining Basin. The Triassic flysch sediments surrounding the basin were the primary sources of sediment. Between ca. 44–40 Ma, the basin enlarged and deepened, and sedimentation was dominated by saline lake sediments. Between ca. 40–25.5 Ma, the Xining Basin began to shrink and dry, resulting in the deposition of saline pan and saline mudflat sediments in the basin. After ca. 20 Ma, the Laji Shan to the south of the Xining Basin was uplifted due to the northward compression of the Guide Basin to the south. Clasts that eroded from this range dominated the sediments as the basin evolved from a lacustrine environment into a fluvial system. The Xining Basin was an extensional basin in the Early Cenozoic, but changed into a compressive one during the Late Cenozoic, it was not a foreland basin either to the Kunlun Shan or to the western Qinling Shan in the whole Cenozoic. The formation and deformation of the Xining Basin are the direct responses of the India‐Eurasia Collision and the growth of the Qinghai‐Tibetan Plateau.     

Tectono‐sedimentary evolution of the Plio‐Pleistocene Corinth rift,Greece

The onshore central Corinth rift contains a syn‐rift succession >3 km thick deposited in 5–15 km‐wide tilt blocks, all now inactive, uplifted and deeply incised. This part of the rift records upward deepening from fluviatile to lake‐margin conditions and finally to sub‐lacustrine turbidite channel and lobe complexes, and deep‐water lacustrine conditions (Lake Corinth) were established over most of the rift by 3.6 Ma. This succession represents the first of two phases of rift development – Rift 1 from 5.0–3.6 to 2.2–1.8 Ma and Rift 2 from 2.2–1.8 Ma to present. Rift 1 developed as a 30 km‐wide zone of distributed normal faulting. The lake was fed by four major N‐ to NE‐flowing antecedent drainages along the southern rift flank. These sourced an axial fluvial system, Gilbert fan deltas and deep lacustrine turbidite channel and lobe complexes. The onset of Rift 2 and abandonment of Rift 1 involved a 30 km northward shift in the locus of rifting. In the west, giant Gilbert deltas built into a deepening lake depocentre in the hanging wall of the newly developing southern border fault system. Footwall and regional uplift progressively destroyed Lake Corinth in the central and eastern parts of the rift, producing a staircase of deltaic and, following drainage reversal, shallow marine terraces descending from >1000 m to present‐day sea level. The growth, linkage and death of normal faults during the two phases of rifting are interpreted to reflect self‐organization and strain localization along co‐linear border faults. In the west, interaction with the Patras rift occurred along the major Patras dextral strike‐slip fault. This led to enhanced migration of fault activity, uplift and incision of some early Rift 2 fan deltas, and opening of the Rion Straits at ca. 400–600 ka. The landscape and stratigraphic evolution of the rift was strongly influenced by regional palaeotopographic variations and local antecedent drainage, both inherited from the Hellenide fold and thrust belt.     

Early Eocene magnetostratigraphy and tectonic evolution of the Xining Basin,NE Tibet

The Cenozoic strata of the Xining Basin, NE Tibet, have provided crucial records for understanding the tectonic and palaeo-environmental evolution of the region. Yet, the age of the lower part of the sedimentary stratigraphy and, consequently, the early tectonic evolution of the basin remain debated. Here, we present the litho- and magnetostratigraphy of various early Eocene sections throughout the Xining Basin independently constrained by the U–Pb radiometric age of a carbonate bed. Our study extends the dated stratigraphy down to 53.0 Ma (C24n.1r) and reveals highly variable accumulation rates during the early Eocene ranging from 0.5 to 8 cm/ka. This is in stark contrast to the low but stable accumulation rates (2–3 cm/ka) observed throughout the overlying Palaeogene and Neogene strata. Such a pattern of basin infill is not characteristic of flexural subsidence as previously proposed, but rather supports an extensional origin of the Xining Basin with multiple depocentres, which subsequently coalesced into a more stable and slowly subsiding basin. Whether this extension was related to the far-field effects of the subducting Pacific Plate or the India–Asia collision remains to be confirmed by future studies.     

Crustal‐scale fluid flow during the tectonic evolution of the Bighorn Basin (Wyoming,USA)

Stable isotope measurements (O, C, Sr), microthermometry and salinity measurements of fluid inclusions from different fracture populations in several anticlines of the Sevier‐Laramide Bighorn basin (Wyoming, USA) were used to unravel the palaeohydrological evolution. New data on the microstructural setting were used to complement previous studies and refine the fracture sequence at basin scale. The latter provides the framework and timing of fluid migration events across the basin during the Sevier and Laramide orogenic phases. Since the Sevier tectonic loading of the foreland basin until its later involvement into the Laramide thick‐skinned orogeny, three main fracture sets (out of seven) were found to have efficiently enhanced the hydraulic permeability of the sedimentary cover rocks. These pulses of fluid are attested by calcite crystals precipitated in veins from hydrothermal (T > 120 °C) radiogenic fluids derived from Cretaceous meteoric fluids that interacted with the Precambrian basement rocks. Between these events, vein calcite precipitated from formational fluids at chemical and thermal equilibrium with surrounding environment. At basin scale, the earliest hydrothermal pulse is documented in the western part of the basin during forebulge flexuring and the second one is documented in basement‐cored folds during folding. In addition to this East/West diachronic opening of the cover rocks to hydrothermal pulses probably controlled by the tectonic style, a decrease in ^87/86Sr values from West to East suggests a crustal‐scale partially squeegee‐type eastward fluid migration in both basement and cover rocks since the early phase of the Sevier contraction. The interpretation of palaeofluid system at basin scale also implies that joints developed under an extensional stress regime are better vertical drains than joints developed under strike‐slip regime and enabled migration of basement‐derived hydrothermal fluids.     

Cenozoic evolution of the Altyn Tagh and East Kunlun fault zones inferred from detrital garnet,tourmaline and rutile in southwestern Qaidam Basin (Northern Tibetan Plateau)

This study focuses on the Cenozoic provenance and tectonic evolution of the southwestern Qaidam Basin through geochemical analysis of detrital garnet, tourmaline and rutile. The variation of detrital mineral compositions indicates that the Cenozoic evolution can be divided into three stages: (i) before the deposition of the upper Xiaganchaigou Formation (before 37.8 Ma); (ii) between the deposition of the upper Xiaganchaigou Formation and the Shangganchaigou Formation (from 37.8 to 22 Ma); (iii) since the deposition of the Xiayoushashan Formation (since 22 Ma). In the first stage, abundant garnets from high‐grade meta‐basic and ultramafic rocks in the sediments from the Ganchaigou area support a provenance from the South Altyn Tagh HP/UHP metamorphic zone. The low percentage of tourmalines from granitoid rocks in the sediments in the Kunbei‐Lücaotan area suggests a provenance from the East Kunlun fault zone, indicating that the Qimen Tagh Shan was not high enough to prevent the transport of sediments from the southern Qaidam Basin. The sediments in the Qigequan area were derived from both the Altyn Tagh fault zone and the East Kunlun fault zone. In the second stage, the tectonic activity consisted in the rapid uplift of the Altyn Shan. Changes in garnet composition indicate a lower detrital contribution from high‐grade metamorphic rocks. In the third stage, the disappearance of garnets from high‐grade metamorphic rocks and scattered temperatures of rutiles in the Ganchaigou area suggest that the source area shifted from the South Altyn Tagh HP/UHP metamorphic rocks to weakly metamorphosed Meso‐Neoproterozoic sedimentary rocks. The increase in granitoid‐derived tourmalines in the Kunbei‐Lücaotan area is indicative of the rapid uplift of the Qimen Tagh Shan. The provenance evolution in the southwestern Qaidam Basin indicates that the tectonic activity along the Altyn Tagh fault zone can be divided into an early stage of Altyn Shan uplift and a later stage of left‐lateral slip. At the same time, tectonic movement along the East Kunlun fault zone initiated.     

The synrift phase of the early Domeyko Basin (Triassic,northern Chile): Sedimentary,volcanic, and tectonic interplay in the evolution of an ancient subduction‐related rift basin

The geodynamic setting along the SW Gondwana margin during its early breakup (Triassic) remains poorly understood. Recent models calling for an uninterrupted subduction since Late Palaeozoic only slightly consider the geotectonic significance of coeval basins. The Domeyko Basin initiated as a rift basin during the Triassic being filled by sedimentary and volcanic deposits. Stratigraphic, sedimentological, and geochronological analyses are presented in order to determine the tectonostratigraphic evolution of this basin and to propose a tectonic model suitable for other SW Gondwana‐margin rift basins. The Domeyko Basin recorded two synrift stages. The Synrift I (~240–225 Ma) initiated the Sierra Exploradora sub‐basin, whereas the Synrift II (~217–200 Ma) reactivated this sub‐basin and originated small depocentres grouped in the Sierra de Varas sub‐basin. During the rift evolution, the sedimentary systems developed were largely controlled by the interplay between tectonics and volcanism through the accommodation/sediment supply ratio (A/S). High‐volcaniclastic depocentres record a net dominance of the syn‐eruptive period lacking rift‐climax sequences, whereas low‐volcaniclastic depocentres of the Sierra de Varas sub‐basin developed a complete rift cycle during the Synrift II stage. The architecture of the Domeyko Basin suggests a transtensional kinematic where N‐S master faults interacted with ~NW‐SE basement structures producing highly asymmetric releasing bends. We suggest that the early Domeyko Basin was a continental subduction‐related rift basin likely developed under an oblique convergence in a back‐arc setting. Subduction would have acted as a primary driving mechanism for the extension along the Gondwanan margin, unlike inland rift basins. Slab‐induced dynamic can strongly influence the tectonostratigraphic evolution of subduction‐related rift basins through controls in the localization and style of magmatism and faulting, settling the interplay between tectonics, volcanism, and sedimentation during the rifting.     

Sedimentary and tectonic evolution of Lake Ohrid (Macedonia/Albania)

Lake Ohrid, located on the Balkan Peninsula within the Dinaride–Albanide–Hellenide mountain belt, is a tectonically active graben within the South Balkan Extensional Regime (SBER). Interpretation of multichannel seismic cross sections and bathymetric data reveals that Lake Ohrid formed during two main phases of deformation: (1) a transtensional phase which opened a pull‐apart basin, and (2) an extensional phase which led to the present geometry of Lake Ohrid. After the initial opening, a symmetrical graben formed during the Late Miocene, bounded by major normal faults on each side in a pull‐apart type basin. The early‐stage geometry of the basin has a typical rhomboidal shape restricted by two sets of major normal faults. Thick undisturbed sediments are present today at the site where the acoustic basement is deepest, illustrating that Lake Ohrid is a potential target for drilling a long and continuous sediment core for studying environmental changes within the Mediterranean region. Neotectonic activity since the Pliocene takes place along the roughly N–S‐striking Eastern and Western Major Boundary Normal Faults that are partly exposed at the present lake floor. The tectono‐sedimentary structure of the basin is divided into three main seismic units overlying the acoustic basement associated with fluvial deposits and lacustrine sediments. A seismic facies analysis reveals a prominent cyclic pattern of high‐ and low‐amplitude reflectors. We correlate this facies cyclicity with vegetation changes within the surrounding area that are associated with glacial/interglacial cycles. A clear correlation is possible back to ca. 450 kyrs. Extrapolation of average sedimentation rates for the above mentioned period results in age estimate of ca. 2 Myrs for the oldest sediments in Lake Ohrid.     

Late Quaternary evolution of the Madeira Abyssal Plain,Canary Basin,NE Atlantic

The deepest part of the Canary Basin, the Madeira Abyssal Plain, receives allochthonous sediments derived from a large drainage basin which, if its subaerial continuation is included, covers an area of 3.36 times 10⁶ km². An international research effort over the last 10 years has recovered over 160 sediment cores from the plain, and the development of a high-resolution stratigraphy has enabled individual turbidites to be correlated layer by layer. Sedimentation on the Madeira Abyssal Plain during the late Quaternary is dominated by thick turbidite muds separated by thin pelagic intervals. The core density has allowed the mapping of each sedimentary unit throughout the abyssal plain, thus building up a layer by layer picture of sediment accumulation. Over the last 300 kyr, 600 km³ of turbidites compared to 60 km³ of pelagic sediments have been deposited on the plain. Sedimentary structures developed in the coarse basal facies of the larger turbidites are more complex than simple models predict due to surging flows, fluctuating flow velocities and reflection from adjacent high ground. Over the last 300 kyr, there has been a switching of entry points for turbidity currents entering the abyssal plain. From 300 ka to 200 ka, organic-rich turbidites were emplaced predominantly from the south but around 200 ka this source switched off and subsequent organic- and volcanic-rich turbidites, which included units deposited by giant, possibly hyperconcentrated flows, were emplaced from northern or eastern sources. Although restricted to the late Quaternary, the data presented provides a detailed case study of the evolution of an oceanic basin fill.     

Microbial‐dominated carbonate platforms during the Ladinian rifting: sequence stratigraphy and evolution of accommodation in a fault‐controlled setting (Catalan Coastal Ranges,NE Spain)

The Upper Muschelkalk sedimentary record constitutes a major transgressive pulse of north‐eastern Iberia during the Ladinian. This record is arranged in two transgressive–regressive (T–R) sequences formed by two stepped microbial‐dominated carbonate ramp systems where accommodation was mainly controlled by extensional faults. This study seeks to gain new insights into how the evolution of syn‐rift subsidence controls the creation of accommodation space, the depositional styles and, especially, the palaeogeographical domains where specific microbialites developed (thrombolites and stromatolites). Thrombolite bodies (at least 40 m thick) display two types of architecture, biostromal and mud‐mounded and stromatolite bodies (at least 7 m thick) consist of tabular and domed, head‐shaped morphologies. Domed and mounded forms are usually developed during stages of increasing accommodation rates, low‐to flat‐nelief forms tend to grow in association with periods of low accommodation rates. A sea‐level fall of at least 50 m occurred at the end of the Early Ladinian leaving the platform subaerially exposed. As a result, a prominent karst with significant erosional incisions and profuse collapse breccia fillings was formed in the inner and middle ramp settings. The resultant subaerial unconformity bounds T–R sequences 1 and 2. Subsidence curves display two stages of rapid/decelerated total subsidence, constituting two discrete rift/post‐rift pulses in the large Triassic rifting period: (i) Buntsandstein – Middle Muschelkalk, and (ii) Late Muschelkalk – Imon Formation (Rhaetian). The second pulse is characterized by a rapid syn‐rift subsidence during the Late Muschelkalk, and a decelerated post‐rift subsidence throughout the deposition of Keuper facies and Imon Formation. The Late Muschelkalk rapid syn‐rift pulse of total subsidence produces gains in accommodation, which controls the development of the stromatolites and thrombolites (biostromes and mud‐mounds).     

Factors controlling stratal pattern and facies distribution of fluvio‐lacustrine sedimentation in the Sivas mini‐basins,Oligocene (Turkey)

The Sivas Basin, located in the Central Anatolian Plateau of Turkey, is a foreland basin that records a complex interaction between sedimentation, salt tectonics and regional shortening during the Oligo‐Miocene leading to the formation of numerous mini‐basins. The Oligocene sedimentary infill of the mini‐basins consists of a thick continental succession, the Karayün Formation, comprising a vertical succession of three main sub‐environments: (i) playa‐lake, (ii) fluvial braided, and (iii) saline lacustrine. These sub‐environments are seen as forming a large Distributive Fluvial System (DFS) modified through time as a function of sediment supply and accommodation related to regional changes in climate and tectonic regime. Within neighbouring mini‐basins and despite a similar vertical stratigraphic succession, subtle variations in facies assemblages and thickness are observed in stratigraphic units of equivalent age, thus demonstrating the local control exerted by halokinesis. Stratigraphic and stratal patterns reveal in great detail the complex interaction between salt tectonics and sedimentation including different types of halokinetic structures such as hooks, wedges and halokinetic folds. The regional variations of accommodation/sediment supply led to coeval changes in the architectural patterns recorded in the mini‐basins. The type of accommodation regime produces several changes in the sedimentary record: (i) a regime dominated by regional accommodation limits the impact of halokinesis, which is recorded as very small variations in stratigraphic thickness and facies distribution within and between mini‐basins; (ii) a regime dominated by localized salt‐induced accommodation linked to the subsidence of each individual mini‐basin enhances the facies heterogeneity within the DFS, causing sharp changes in stratigraphic thickness and facies assemblages within and between mini‐basins.     

Deep vs. shallow controlling factors of the crustal thermal field – insights from 3D modelling of the Beaufort‐Mackenzie Basin (Arctic Canada)

Significant lateral variations in observed temperatures in the Beaufort‐Mackenzie Basin raise the question on the temperature‐controlling factors. Based on the structural configuration of the sediments and underlying crust in the area, we calculate the steady‐state 3D conductive thermal field. Integrated data include the base of the relic permafrost layer representing the 0 °C‐isotherm, public‐domain temperature data (from 227 wells) and thermal conductivity data. For >75% of the wells the predicted temperatures deviate by <10 K from the observed temperatures, which validates the overall model setup and adopted thermal properties. One important trend reproduced by the model is a decrease in temperatures from the western to the eastern basin. While in the west, a maximum temperature of 185 °C is reached at 5000 m below sea level, in the east the maximum temperature is 138 °C. The main cause for this pattern lies in lateral variations in thermal conductivity indicating differences in the shale and sand contents of the different juxtaposed sedimentary units. North‐to‐south temperature trends reveal the superposition of deep and shallow effects. At the southern margin, where the insulating effect of the low‐conductive sediments is missing, temperatures are lowest. Farther north, where the sub‐sedimentary continental crust is thick enough to produce considerable heat and a thick pile of sediments efficiently stores heat, temperatures tend to be highest. Temperatures decrease again towards the northernmost distal parts of the basin, where thinned continental and oceanic crust produce less radiogenic heat. Wells with larger deviations of the purely conductive model from the temperature observations (>15 K at 10% of the wells) and their basin‐wide pattern of misfit tendency (too cold vs. too warm temperature predictions) point to a locally restricted coupling of heat transport to groundwater flow.     

Fracturing and fluid‐flow during post‐rift subsidence in carbonates of the Jandaíra Formation,Potiguar Basin,NE Brazil

Pervasive fracture networks are common in many reservoir‐scale carbonate bodies even in the absence of large deformation and exert a major impact on their mechanical and flow behaviour. The Upper Cretaceous Jandaíra Formation is a few hundred meters thick succession of shallow water carbonates deposited during the early post‐rift stage of the Potiguar rift (NE Brazil). The Jandaíra Formation in the present onshore domain experienced <1.5 km thermal subsidence and, following Tertiary exhumation, forms outcrops over an area of >1000 km². The carbonates have a gentle, <5?, dip to the NE and are affected by few regional, low displacement faults or folds. Despite their simple tectonic history, carbonates display ubiquitous open fractures, sub‐vertical veins, and sub‐vertical as well as sub‐horizontal stylolites. Combining structural analysis, drone imaging, isotope studies and mathematical modelling, we reconstruct the fracturing history of the Jandaíra Formation during and following subsidence and analyse the impact fractures had on coeval fluid flow. We find that Jandaíra carbonates, fully cemented after early diagenesis, experienced negligible deformation during the first few hundreds of meters of subsidence but were pervasively fractured when they reached depths >400–500 m. Deformation was accommodated by a dense network of sub‐vertical mode I and hybrid fractures associated with sub‐vertical stylolites developed in a stress field characterised by a sub‐horizontal σ₁ and sub‐vertical σ₂. The development of a network of hybrid fractures, rarely reported in the literature, activated the circulation of waters charged in the mountainous region, flowing along the porous Açu sandstone underlying the Jandaíra carbonates and rising to the surface through the fractured carbonates. With persisting subsidence, carbonates reached depths of 800–900 m entering a depth interval characterised by a sub‐vertical σ₁. At this stage, sub‐horizontal stylolites developed liberating calcite which sealed the sub‐vertical open fractures transforming them in veins and preventing further flow. During Tertiary exhumation, several of the pre‐existing veins and stylolites opened and became longer, and new fractures were created typically with the same directions of the older features. The simplicity of our model suggests that most rocks in passive margin settings might have followed a similar evolution and thus display similar structures.     

10 Myr evolution of sedimentation rates in a deep marine to non‐marine foreland basin system: Tectonic and sedimentary controls (Eocene,Tremp–Jaca Basin,Southern Pyrenees,NE Spain)

The propagation of the deformation front in foreland systems is typically accompanied by the incorporation of parts of the basin into wedge‐top piggy‐back basins, this process is likely producing considerable changes to sedimentation rates (SR). Here we investigate the spatial‐temporal evolution of SR for the Tremp–Jaca Basin in the Southern Pyrenees during its evolution from a wedge‐top, foreredeep, forebulge configuration to a wedge‐top stage. SR were controlled by a series of tectonic structures that influenced subsidence distribution and modified the sediment dispersal patterns. We compare the decompacted SR calculated from 12 magnetostratigraphic sections located throughout the Tremp–Jaca Basin represent the full range of depositional environment and times. While the derived long‐term SR range between 9.0 and 84.5 cm/kyr, compiled data at the scale of magnetozones (0.1–2.5 Myr) yield SR that range from 3.0 to 170 cm/kyr. From this analysis, three main types of depocenter are recognized: a regional depocenter in the foredeep depozone; depocenters related to both regional subsidence and salt tectonics in the wedge‐top depozone; and a depocenter related to clastic shelf building showing transgressive and regressive trends with graded and non‐graded episodes. From the evolution of SR we distinguish two stages. The Lutetian Stage (from 49.1–41.2 Ma) portrays a compartmentalized basin characterized by variable SR in dominantly underfilled accommodation areas. The markedly different advance of the deformation front between the Central and Western Pyrenees resulted in a complex distribution of the foreland depozones during this stage. The Bartonian–Priabonian Stage (41.2–36.9 Ma) represents the integration of the whole basin into the wedge‐top, showing a generalized reduction of SR in a mostly overfilled relatively uniform basin. The stacking of basement units in the hinterland during the whole period produced unusually high SR in the wedge‐top depozone.     

Post‐orogenic thermal history and exhumation of the northern Appalachian Basin: Low‐temperature thermochronologic constraints

Apatite fission‐track (AFT) thermochronology and (U‐Th)/He (AHe) dating, combined with paleothermometers and independent geologic constraints, are used to model the thermal history of Devonian Catskill delta wedge strata. The timing and rates of cooling determines the likely post‐orogenic exhumation history of the northern Appalachian Foreland Basin (NAB) in New York and Pennsylvania. AFT ages generally young from west to east, decreasing from ~185 to 120 Ma. AHe single‐grain ages range from ~188 to 116 Ma. Models show that this part of the Appalachian foreland basin experienced a non‐uniform, multi‐stage cooling history. Cooling rates vary over time, ~1–2 °C/Myr in the Early Jurassic to Early Cretaceous, ~0.15–0.25 °C/Myr from the Early Cretaceous to Late Cenozoic, and ~1–2 °C/Myr beginning in the Miocene. Our results from the Mesozoic are broadly consistent with earlier studies, but with the integration of multiple thermochronometers and multi‐kinetic annealing algorithms in newer inverse thermal modeling programs, we constrain a Late Cenozoic increase in cooling which had been previously enigmatic in eastern U.S. low‐temperature thermochronology datasets. Multi‐stage cooling and exhumation of the NAB is driven by post‐orogenic basin inversion and catchment drainage reorganization, in response to changes in base level due to rifting, plus isostatic and dynamic topographic processes modified by flexure over the long (~200 Myr) post‐orogenic period. This study compliments other regional exhumation data‐sets, while constraining the timing of post‐orogenic cooling and exhumation in the NAB and contributing important insights on the post‐orogenic development and inversion of foreland basins along passive margins.     

First record of Branchinella spinosa (Milne-Edwards) (Crustacea: Branchiopodacolon; Anostraca) from Greece

As the result of a first screening of temporary inland water habitats,Branchinella spinosa is here recorded for the first time in Greece. This finding extends the circum-Mediterranean part of its vast distribution. The species was collected from a shallow astatic coastal salt-marsh that is mainly fed by rainwater, where it coexists but rarely co-occurs withArtemia parthenogenetica. Branchinella spinosa is only the fourth anostracan species currently known from Greece. The poor knowledge of anostracan richness and abundance is mainly due to limited sampling efforts in this area. As temporary aquatic habitats are threatened by several anthropogenic activities, especially agriculture and land clearing for urbanisation and tourism, there is an urgent necessity for further monitoring and protection of these precious habitats.