折射静校正技术在宣东地震资料处理中的应用

当地震数据中存在较大的静校正量时，利用模型道与各道互相关求取时差的反射波静校正方法往往不能奏效，其主要原因是得不到好的模型道，当原始资料的信噪比很低时，这一问题更加突出，因此必须首先解决好野外一次静校正。近年来，针对复杂地形和地表结构的折射波静校正，总差分折射静校正方法和基于速度模型的反演静校正方法被广泛应用。在静校正问题严重的宣东地区为例，综合运用了这两种折射静校正方法进行三维地震资料的处理，取得良好效果。     

江陵凹陷北部高速玄武岩下二维广角地震初探

江汉油田江陵凹陷北部高速玄武岩发育,利用常规地震资料很难得到高速玄武岩下的地震反射。分析研究表明,广角地震有利于玄武岩下的地震成像。通过综合正演和实际地震数据完成了广角地震资料的处理,获得了江陵凹陷北部高速玄武岩下的反射地震信息。在开展广角地震波场的识别和利用研究过程中,从正演模型出发,探讨了在不同地质条件下高速层对地震波场的影响,并针对靶区资料讨论了如何识别广角地震信息。在上述基础上,通过对实际地震资料做精细的分析和处理,最终完成了高速玄武岩下地震资料的成像。     

辽西葫芦岛东部表层结构调查及速度建模

针对国家深部探测项目地震数据采集及表层速度结构模型建立的需求,在辽西葫芦岛东部二维地震勘探工区开展了表层结构调查工作。该地区地表起伏大,表层结构复杂,低、降速层厚度和速度多变,静校正问题突出,做好表层结构速度建模工作成为该区地震勘探的关键问题之一。由该工区实验点多种表层调查方法对比实验结果,确定了该工区表层调查工作方式：以井中微测井方法为主,在满足小折射地表条件的区段辅以成本较低的小折射方法作为补充;同时对留作微测井的生产井进行岩性录井。基于以上方法,分析了表层调查野外施工的难点和对策,确定了微测井采集参数。本次表层调查工作测线长度16.9 km,设计了8口微测井,根据微测井解释成果得到如下结果：该测线表层分2~3层;低速层厚度为1.68~4.33 m,速度为350~1 000 m/s;降速层厚度为5.00~12.00 m,速度为1 000~2 800 m/s;高速层主要为岩性致密的花岗岩,速度为2 800~4 900 m/s。根据井中微测井结果及层间相似系数,建立了该测线的表层模型,设计激发井深13.00~15.00 m,并获得静校正量数据。     

综合折射静校正方法在柴达木盆地的应用

在表层结构调查资料的约束下, 利用大炮初至折射静校正方法反演出精确、合理的表层结构模型, 进而求取炮点、检波点静校正量.选定柴达木盆地北极星工区04314测线进行地震模型数值模拟, 并对模型数据和野外地震资料进行多种静校正方法对比分析研究, 综合折射静校正方法的误差最小, 叠加效果最好.表明综合折射静校正方法结合了模型静校正和折射静校正的优点, 不仅较好地解决了影响剖面信噪比的短波长静校正问题, 同时也能解决产生虚假构造的长波长静校正问题.      

LT区低信噪比地震资料现场处理方法

针对LOTUS区块的地震资料,研究了复杂地表区低信噪比地震资料现场处理的方法。在大量的试验和分析的基础上,采用高程静校正与折射静校正相结合的方法,有效解决了因地表起伏大、低降带速度和厚度剧烈变化引起的野外静校正问题。对于面波、低频干扰,规则线性干扰等造成的地震资料信噪比降低进行了针对性的压制和消弱。采用地表一致性反褶积技术基本解决了因激发和接收条件引起的不同炮集记录上的地震波属性的变化。总结了一套适合该区地震资料现场处理的方法和流程。     

浅海海底表层速度建模技术及其应用研究

浅海海底起伏和速度变化对OBC资料成像质量产生较大影响。建立浅海海底表层速度模型不仅能够解决OBC资料的静校正问题,也可用于海底反射系数计算、双检资料合并、多次波压制等,但是,目前针对浅海海底表层速度建模的研究还不多。文中提出了针对浅海地区OBC资料的海底表层速度建模的三维初至走时反演技术,主要包括:(1)震源位置校正技术。根据地震波在海水中传播特征,把在海水中激发的震源位置校正至海底,使震源和接收点都位于海底,利于初至走时反演计算;(2)快速三维初至走时反演方法。利用回折波走时和射线方程,形成了高效率初至走时反演方法。将该技术应用于胜利油田莱州湾浅海区海底OBC资料的处理中,建立了三维海底表层速度模型,用此速度模型进行静校正,取得了良好的应用效果。     

中国大陆科学钻探场址区的地壳速度结构特征

为了深入研究大别—苏鲁超高压变质带的深部结构及空间展布特征, 进一步揭示该超高压变质形成的动力学过程, 在中国大陆科学钻探场址区进行了广角反射/折射地震测深调查.根据广角反射/折射地震测深的资料研究, 建立了中国大陆科学钻探场址区的地壳纵波速度结构.从纵向上来看, 研究区域的地壳结构可划分为上、中、下3层: 上地壳的速度小于6.2 0km/s, 厚10余km; 中地壳的速度为6.4 0km/s, 厚亦为10km左右; 下地壳的速度为6.6 0km/s.地壳厚度为31km左右, 且其地壳的平均速度为6.30km/s.上地壳中的速度倒转指示了超高压变质体在地壳内部的空间分布, 且超高压变质体在大陆科学钻探场址及其附近的下部呈现为一隆起形态.      

鄂尔多斯盆地西南部巨厚黄土塬区非纵地震资料处理技术

鄂尔多斯盆地西南部地表为巨厚黄土塬区,地表结构复杂,低降速带厚度变化快,沟中弯线受地形条件限制,测线成网困难,直测线采集资料信噪比和分辫率都较低,难以满足目前岩性勘探的需求。针对这种情况,在经过理论论证和生产试验后,研发了一套针对黄土塬地区的非纵地震勘探技术,这种技术兼顾吸收了黄土塬沟中弯线、黄土塬多线及三维地震勘探技术的优点,不仅避开了黄土塬近炮点强能量干扰,而且还展宽了叠加道集方位角。针对非纵地震资料特点,在保真保幅处理理念指导下,通过非纵资料处理技术攻关,提出了针对非纵资料的三维静校正技术、创新性应用三维噪声压制模块压制非纵测线相干噪声、改进了基于VSP测井合成记录的井控处理理念,形成了一套巨厚黄土塬区低信噪比非纵地震资料处理技术序列。      

复杂山地低信噪比地震资料处理方法

宜阳复杂山地地震资料的特点是静校正量大,信噪比低。针对该区的特点,在资料处理中采用建立全区统一浮动基准面与折射静校正方法解决静校正问题;运用叠前去噪技术、目标速度分析、DMO技术、优化迭代叠加技术、F-X域信号增强去噪技术,同时,优化处理流程,精选处理参数,取得了明显效果。     

Imaging low-velocity anomalies with the aid of seismic tomography

Theoretical considerations (Snell's law) suggest that low-velocity fanomalies are undersampled and therefore should be poorly resolved by inversion schemes based on ray-tracing methods. A synthetic study considering a 40×20 m low-velocity anomaly (300 m/s) placed at the center of a 400×50 m block with gradient background velocity model (from 3000 m/s at the surface to 4000 m/s at the base) indicates that the low ray density in ray-tracing coverage diagrams of tomographic inversion studies can be used as evidence for the existence of low-velocity anomalies. Combined normal incidence seismic reflection images and the velocity models obtained by tomographic inversions of first-arrival travel times form an efficient scheme to resolve low-velocity anomalies such as fracture zones. Furthermore, the velocity models derived from tomographic inversions are used in a wave equation datuming algorithm to account for statics caused by a strongly laterally variable shallow surface (weathering) layer and provide seismic reflection images of fracture zones (low-velocity anomaly) within a granitic pluton.     

Lessons from a joint interpretation of vibroseis wide-angle and near-vertical reflection data in the northeastern Yilgarn, Western Australia

A wide-angle reflection seismic experiment was carried out in the Eastern Goldfields granite–greenstone terrane of the Archaean Yilgarn Craton during 2001. This was the first time in Australia that wide-angle data were collected using a vibrator source and with a high density of observations. Unlike other wide-angle surveys carried out in other parts of the world, our survey used both a smaller number of sweeps, and shorter sweeps. We recorded three sweeps (each with its own frequency range) at each vibration point. The experiment demonstrated that the sum of three 12 s sweeps using 3 large vibrators provides enough energy to record signal at offsets up to up to 60–70 km. A comparison of individual shot gathers from near-vertical data and receiver gathers from wide-angle data demonstrated higher reflectivity in near-vertical data. This may be due to differences in the frequency bands of the recording equipment. The after stack section obtained from dense wide-angle data is different from that obtained from conventional near-vertical reflection data. The conventional reflection section provides higher quality image of the crust compared to the wide-angle section. This could be explained by the low-fold in wide-angle data and differences in the acquisition and processing methodology. The wide-angle survey, which was coincident with a regional vibroseis seismic reflection transect, was focused on the Leonora–Laverton region. The survey was designed to supplement the deep seismic reflection studies with velocity information. This also created an opportunity to compare velocity model derived from wide-angle reflection seismic data with a structural image obtained from the deep common mid-point seismic reflection data, and thus refine our geological understanding of the area. A high velocity body reaching a maximum thickness of 2 km was identified exclusively from the seismic velocity model derived from wide-angle study. This body is interpreted as mafic rocks within the Archaean Granite–Greenstone Belt. The joint interpretation also shows that structural boundaries do not always follow lithological boundaries in our study area. The combination of wide-angle reflection and near-vertical reflection data has facilitated a more complete geological interpretation of the seismic data.     

塔里木盆地巴楚隆起低信噪比地震资料处理方法研究

塔里木盆地巴楚隆起勘探程度较低,是开展油气勘探的主要潜力区之一。受近地表激发条件差、低降速带结构变化大、目的层埋藏较深等地表和深层地质条件的影响,研究区地震资料信噪比低、品质较差,严重地制约了地震资料解决地质问题的能力。本文在分析研究区新采集的原始地震资料基础上,建立了精确的近地表模型,采用层析静校正、交互迭代静校正方法求准静校正量;利用多域多阶段联合去除噪声,采取近道内切除等多种方法串联综合应用消除多次波干扰;采用全面统计、逐点处理的地表一致性处理技术进行振幅能量补偿;精细速度分析,优选提高深层弱信号成像质量的偏移方法等一系列的关键技术,使本区低信噪比资料的信噪比、同相轴连续性和构造成像质量得到了较大的改善和提高,取得了较好的应用效果。     

兴蒙造山带西南段深地震反射静校正研究

静校正是深地震反射资料处理的关键技术之一,深反射剖面通常跨越多种不同的地质构造单元,地震地质条件复杂且变化较大,单一的静校正方法通常不能很好地解决深反射的静校正问题,针对兴蒙造山带西南段深反射地震数据进行静校正测试,最终选取多种静校正方法组合静校正技术,即针对不同地质条件分别应用折射和层析相结合来解决静校正问题。对于剩余静校正,采用模拟退火法解决,较好地解决了研究区的静校正问题,为资料后续处理提供借鉴。     

探测壳内低速层的深地震测深方法及应用

中国及全球大陆不同构造域广泛存在壳内低速层。壳内低速层不仅与地壳表层金属、非金属矿床、油气资源及地壳变形密切相关, 而且也是一些重大地震和活动断裂的发育场所。一般认为,地壳低速层反映了地壳物质的含水、热状态和部分熔融等信息, 其研究对探讨地壳结构及其动力学演化有重要意义。本文总结了利用深地震测深资料的震相走时、振幅、相位信息识别壳内低速层的5种典型方法: 1)Pg震相走时中断;2)低速层顶、底界面反射波走时曲线近似平行;3)30°~60°入射角范围内低速层顶界面反射转换波强于反射纵波;4)低速层底界面反射波强于顶界面;5)低速层顶界面反射波极性反转等。研究实例表明, 以上方法为利用深地震测深资料揭示壳内低速层提供了有效途径。     

THE CRUSTAL STRUCTURE BENEATH THE EASTERN QINGHAI

THE CRUSTAL STRUCTURE BENEATH THE EASTERN QINGHAI     

Time-lapse crosswell seismic and VSP monitoring of injected CO<Subscript>2</Subscript> in a brine aquifer

Seismic surveys successfully imaged a small scale CO₂ injection (1,600 ton) conducted in a brine aquifer of the Frio Formation near Houston, Texas. These time-lapse borehole seismic surveys, crosswell and vertical seismic profile (VSP), were acquired to monitor the CO₂ distribution using two boreholes (the new injection well and a pre-existing well used for monitoring) which are 30 m apart at a depth of 1,500 m. The crosswell survey provided a high-resolution image of the CO₂ distribution between the wells via tomographic imaging of the P-wave velocity decrease (up to 500 m/s). The simultaneously acquired S-wave tomography showed little change in S-wave velocity, as expected for fluid substitution. A rock physics model was used to estimate CO₂ saturations of 10–20% from the P-wave velocity change. The VSP survey resolved a large (∼70%) change in reflection amplitude for the Frio horizon. This CO₂ induced reflection amplitude change allowed estimation of the CO₂ extent beyond the monitor well and on three azimuths. The VSP result is compared with numerical modeling of CO₂ saturations and is seismically modeled using the velocity change estimated in the crosswell survey.     

中国大陆科学钻探孔区反射地震剖面的数值模拟与分析

本初步分析了苏鲁超高压变质带大陆科学钻探孔区的地震波速度结构，在此基础上对在东海孔区三维反射地震勘探过井孔的NNW-SSE主剖面和该周围地区的DH99二维反射地震剖面进行了数值模拟分析。结果表明，数值理论模拟结果与三维反射主剖面地震波到时吻合良好，模拟法能实现有效的时深转换，也表明数值模拟中采用的速度结构是合理的。东海钻井孔区实施反射地震勘测，所得地震记录剖面图是单一P波记录，在超高压变质岩区反射地震记录图中S波的影响甚微。DH99二维反射地震剖面的模拟结果表明东海孔区2000米深度以上的密度，波速结构不随深度加大而变化；而且苏鲁超高压变质岩区地表浅层的地震波速和密度较高，是高速高密地区。岩心结果反映的反射地震阻抗差大的地段，数值模拟的理论剖面上强反射面与孔区反射地震剖面图中的强反射体基本吻合．它意味着在非沉积层的结晶岩区，反射地震勘测手段是研究地下复杂结构的有效方法。数值模拟方法可以进一步提取地震反射记录信息，是利用地震反射方法研究地球构造的一种有效的方法。     

Geophysical investigation for shallow subsurface geotechnical problems of Mokattam area,Cairo, Egypt

Nine vertical electrical soundings of Schlumberger configuration were measured with AB/2 = 1–500 m. Manual and computerized interpretation were done to detect the subsurface stratigraphy of the study area. The results show that the subsurface section consists of alternated units of limestone, clay, marly limestone and dolomitic limestone and the thickness of clay unit ranged from 10 to 40 m. Nine dipole–dipole sections have also been constructed to give a clearer picture of the subsurface at the study area. The length of each dipole–dipole section is 235 m, with a electrode spacing ranging between 5 and 25 m. The Res2Dinv software was used for processing and interpretation of field data. The dipole–dipole sections at the upper plateau display high resistivity values at most parts of the plateau. Twelve shallow seismic refraction profiles are measured at selected locations for the dipole sections to define the interface between the fractured limestone and the upper surface of the clay layer. Each profile consists of 24 geophones with a geophone spacing of 2–3 m. Interpretation of seismic data indicates that the surface layer of the upper plateau consists of fractured limestone with a velocity range of 1.16–1.56 km/s and another layer of compacted clay with a velocity range of 1.38–1.88 km/s. Furthermore, the surface layer of the middle plateau consists of marl and marly limestone with a velocity about 2.1 km/s and its underlying layer consists of massive limestone with a velocity of 4.94 km/s.     

山区三维静校正方法研究

依托国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”,对“山西国阳新能股份有限公司二矿390水平九采区高精度三维地震勘探”及山西阳泉五矿首采区老资料研究二个项目进行资料处理,以攻克影响勘探精度和分辨率的静校正问题。通过对二区块地震资料分别采用绿山折射静校正、综合折射静校正、层析静校正,发现综合折射静校正相对于绿山折射静校正,可以较好的解决静校正的短波长分量、长波长分量问题,更加准确的刻化出地质构造情况,而层析静校正能够更好地解决近地表横向速度变化大、地表没有同一稳定折射层、地表存在高速体等复杂地形的静校正问题,保证同相叠加和正确成像,提高资料的分辨率及勘探精度。     

火成岩覆盖区地震有效成像技术探讨及其在辽西金羊盆地油气调查中的应用

辽西金羊盆地是下辽河盆地外围盆地群中面积最大的中生代盆地,盆地浅层火成岩广泛发育、其厚度大、期次较多,受火成岩对地震信号屏蔽以及该地区复杂的地震地质条件的影响,使得地震勘探采集的原始资料信噪比低、火成岩下伏地层反射能量弱,给地震资料的有效成像带来了极大挑战。本文根据原始地震资料特点,采用针对性的采集、处理技术,首先从采集方面以大能量激发、低频检波器接收,并且处理中应用反射能量补偿、静校正、叠前多域去噪等几项技术进一步提高资料的深层反射能量和信噪比,最后通过高精度速度场建模与地震偏移成像技术的多种方法对比,优选叠前时间偏移技术进行最终成像。与以往地震资料比较,采用这套有效成像技术重新处理的地震剖面信噪比、分辨率明显提高,更重要的深层反射能量得以有效恢复,火成岩的下伏地层反射信号清晰、地层接触关系明确,特别是大倾角地层及断层的成像得以明显改善,为后续的构造解释和勘探潜力区评价提供了高质量的地震资料。