Solubility of KFe(CrO4)2·2H2O at 4–75°C

The solubility of KFe(CrO₄)₂·2H₂O, a precipitate recently identified in a Cr(VI)-contaminated soil, was studied in dissolution and precipitation experiments. Ten dissolution experiments were conducted at 4–75°C and initial pH values between 0.8 and 1.2 using synthetic KFe(CrO₄)₂·2H₂O. Four precipitation experiments were conducted at 25°C with final pH values between 0.16 and 1.39. The log K_SP for the reaction

相似文献   

Molecular H2O in armenite, BaCa2Al6Si9O30·2H2O, and epididymite, Na2Be2Si6O15·H2O: Heat capacity, entropy and local-bonding behavior of confined H2O in microporous silicates

Armenite, ideal formula BaCa₂Al₆Si₉O₃₀·2H₂O, and its dehydrated analog BaCa₂Al₆Si₉O₃₀ and epididymite, ideal formula Na₂Be₂Si₆O₁₅·H₂O, and its dehydrated analog Na₂Be₂Si₆O₁₅ were studied by low-temperature relaxation calorimetry between 5 and 300 K to determine the heat capacity, C_p, behavior of their confined H₂O. Differential thermal analysis and thermogravimetry measurements, FTIR spectroscopy, electron microprobe analysis and powder Rietveld refinements were undertaken to characterize the phases and the local environment around the H₂O molecule.The determined structural formula for armenite is Ba_0.88(0.01)Ca_1.99(0.02)Na_0.04(0.01)Al_5.89(0.03)Si_9.12(0.02)O₃₀·2H₂O and for epididymite Na_1.88(0.03)K_0.05(0.004)Na_0.01(0.004)Be_2.02(0.008)Si_6.00(0.01)O₁₅·H₂O. The infrared (IR) spectra give information on the nature of the H₂O molecules in the natural phases via their H₂O stretching and bending vibrations, which in the case of epididymite only could be assigned. The powder X-ray diffraction data show that armenite and its dehydrated analog have similar structures, whereas in the case of epididymite there are structural differences between the natural and dehydrated phases. This is also reflected in the lattice IR mode behavior, as observed for the natural phases and the H₂O-free phases. The standard entropy at 298 K for armenite is S° = 795.7 ± 6.2 J/mol K and its dehydrated analog is S° = 737.0 ± 6.2 J/mol K. For epididymite S° = 425.7 ± 4.1 J/mol K was obtained and its dehydrated analog has S° = 372.5 ± 5.0 J/mol K. The heat capacity and entropy of dehydration at 298 K are Δ = 3.4 J/mol K and ΔS^rxn = 319.1 J/mol K and Δ = −14.3 J/mol K and ΔS^rxn = 135.7 J/mol K for armenite and epididymite, respectively. The H₂O molecules in both phases appear to be ordered. They are held in place via an ion-dipole interaction between the H₂O molecule and a Ca cation in the case of armenite and a Na cation in epididymite and through hydrogen-bonding between the H₂O molecule and oxygen atoms of the respective silicate frameworks. Of the three different H₂O phases ice, liquid water and steam, the C_p behavior of confined H₂O in both armenite and epididymite is most similar to that of ice, but there are differences between the two silicates and from the C_p behavior of ice. Hydrogen-bonding behavior and its relation to the entropy of confined H₂O at 298 K is analyzed for various microporous silicates.The entropy of confined H₂O at 298 K in various silicates increases approximately linearly with increasing average wavenumber of the OH-stretching vibrations. The interpretation is that decreased hydrogen-bonding strength between a H₂O molecule and the silicate framework, as well as weak ion-dipole interactions, results in increased entropy of H₂O. This results in increased amplitudes of external H₂O vibrations, especially translations of the molecule, and they contribute strongly to the entropy of confined H₂O at T < 298 K.     

Phase relations in the CH4-H2O-NaCl system at 2 kbar, 300 to 600°C as determined using synthetic fluid inclusions

Synthesis of fluid inclusions in the CH₄-H₂O-NaCl system was accomplished by subjecting fractured quartz or fluorite, along with known quantities of CH₄, H₂O, and NaCl, to a pressure of 2 kbar and temperatures of 300, 400, 500, or 600°C, in sealed Au capsules. Under the elevated P-T conditions, some of the fractures healed, trapping fluids as inclusions. Microthermometric measurements conducted on the fluid inclusions show that at 2 kbar and 400 to 600°C, there are very broad regions of fluid unmixing in the CH₄-H₂O-NaCl system. For those bulk fluid compositions that lie in the two-phase (i.e., immiscible fluids) field, the high-density phase is enriched in NaCl, whereas the low-density phase is enriched in CH₄. For any given bulk composition, the degree of NaCl enrichment in the high-density phase increases, whereas the degree of CH₄ enrichment in the low-density phase decreases, as temperature increases from 400 to 600°C. Our experimental constraints on the size of the two-phase field are generally consistent with results generated using the equation-of-state GEOFLUIDS (available at http://geotherm.ucsd.edu/geofluids/). However, when comparing the compositions of coexisting immiscible fluids, as determined experimentally vs. calculated using GEOFLUIDS, we find that some relatively small but probably significant differences exist between our experiments and this equation of state.     

Solid-liquid equilibria of Mg(OH)2(cr) and Mg2(OH)3Cl·4H2O(cr) in the system Mg-Na-H-OH-Cl-H2O at 25°C

The solubility of crystalline Mg(OH)₂(cr) was determined by measuring the equilibrium H⁺ concentration in water, 0.01-2.7 m MgCl₂, 0.1-5.6 m NaCl, and in mixtures of 0.5 and 5.0 m NaCl containing 0.01-0.05 m MgCl₂. In MgCl₂ solutions above 2 molal, magnesium hydroxide converted into hydrated magnesium oxychloride. The solid-liquid equilibrium of Mg₂(OH)₃Cl·4H₂O(cr) was studied in 2.1-5.2 m MgCl₂. Using known ion interaction Pitzer coefficients for the system Mg-Na-H-OH-Cl-H₂O (25°C), the following equilibrium constants at I = 0 are calculated:

     

An experimental study of the solubility of molybdenum in H2O and KCl-H2O solutions from 500 °C to 800 °C, and 150 to 300 MPa

The solubility of molybdenum (Mo) was determined at temperatures from 500 °C to 800 °C and 150 to 300 MPa in KCl-H₂O and pure H₂O solutions in cold-seal experiments. The solutions were trapped as synthetic fluid inclusions in quartz at experimental conditions, and analyzed by laser ablation inductively coupled plasma mass spectrometry (LA ICPMS).Mo solubilities of 1.6 wt% in the case of KCl-bearing aqueous solutions and up to 0.8 wt% in pure H₂O were found. Mo solubility is temperature dependent, but not pressure dependent over the investigated range, and correlates positively with salinity (KCl concentration). Molar ratios of ∼1 for Mo/Cl and Mo/K are derived based on our data. In combination with results of synchrotron X-ray absorption spectroscopy of individual fluid inclusions, it is suggested that Mo-oxo-chloride complexes are present at high salinity (>20 wt% KCl) and ion pairs at moderate to low salinity (<11 wt% KCl) in KCl-H₂O aqueous solutions. Similarly, in the pure H₂O experiments molybdic acid is the dominant species in aqueous solution. The results of these hydrothermal Mo experiments fit with earlier studies conducted at lower temperatures and indicate that high Mo concentrations can be transported in aqueous solutions. Therefore, the Mo concentration in aqueous fluids seems not to be the limiting factor for ore formation, whereas precipitation processes and the availability of sulfur appear to be the main controlling factors in the formation of molybdenite (MoS₂).     

Interdiffusion of H2O and CO2 in metamorphic fluids at ∼490 to 690°C and 1 GPa

Interdiffusion coefficients have been determined for H₂O-CO₂ mixtures by quantifying the flux of CO₂ between two fluid-filled chambers in a specially designed piston-cylinder cell. The two chambers, which are maintained at 1.0 GPa and at temperatures differing by ∼100°C, each contain the X_CO2-buffering assemblage calcite + quartz + wollastonite, in H₂O. The positive dependence of X_CO2 on temperature results in a down-temperature, steady-state flux of CO₂ through a capillary tube that connects the two chambers. This flux drives the wollastonite = calcite + quartz equilibrium to the right in the cooler chamber, producing a measurable amount of calcite that is directly related to CO₂-H₂O interdiffusion rates. Diffusivities calculated from seven experiments range from 1.0 × 10⁻⁸ to 6.1 × 10⁻⁸ m²/s for mean capillary temperatures between ∼490 and 690°C. The data set can be approximated by an Arrhenius-type relation:

     

Solubility of grossular, Ca3Al2Si3O12, in H2O-NaCl solutions at 800 °C and 10 kbar, and the stability of garnet in the system CaSiO3-Al2O3-H2O-NaCl

The solubility and stability of synthetic grossular were determined at 800 °C and 10 kbar in NaCl-H₂O solutions over a large range of salinity. The measurements were made by evaluating the weight losses of grossular, corundum, and wollastonite crystals equilibrated with fluid for up to one week in Pt capsules and a piston-cylinder apparatus. Grossular dissolves congruently over the entire salinity range and displays a large solubility increase of 0.0053 to 0.132 molal Ca₃Al₂Si₃O₁₂ with increasing NaCl mole fraction (X_NaCl) from 0 to 0.4. There is thus a solubility enhancement 25 times the pure H₂O value over the investigated range, indicating strong solute interaction with NaCl. The Ca₃Al₂Si₃O₁₂ mole fraction versus NaCl mole fraction curve has a broad plateau between X_NaCl = 0.2 and 0.4, indicating that the solute products are hydrous; the enhancement effect of NaCl interaction is eventually overtaken by the destabilizing effect of lowering H₂O activity. In this respect, the solubility behavior of grossular in NaCl solutions is similar to that of corundum and wollastonite. There is a substantial field of stability of grossular at 800 °C and 10 kbar in the system CaSiO₃-Al₂O₃-H₂O-NaCl. At high Al₂O₃/CaSiO₃ bulk compositions the grossular + fluid field is limited by the appearance of corundum. Zoisite appears metastably with corundum in initially pure H₂O, but disappears once grossular is nucleated. At X_NaCl = 0.3, however, zoisite is stable with corundum and fluid; this is the only departure from the quaternary system encountered in this study. Corundum solubility is very high in solutions containing both NaCl and CaSiO₃: Al₂O₃ molality increases from 0.0013 in initially pure H₂O to near 0.15 at X_NaCl = 0.4 in CaSiO₃-saturated solutions, a >100-fold enhancement. In contrast, addition of Al₂O₃ to wollastonite-saturated NaCl solutions increases CaSiO₃ molality by only 12%. This suggests that at high pH (quench pH is 11-12), the stability of solute Ca chloride and Na-Al ± Si complexes account for high Al₂O₃ solubility, and that Ca-Al ± Si complexes are minor. The high solubility and basic dissolution reaction of grossular suggest that Al may be a very mobile component in calcareous rocks in the deep crust and upper mantle when migrating saline solutions are present.     

Solubility and solution mechanism of H2O in alkali silicate melts and glasses at high pressure and temperature

The solubility behavior of H₂O in melts in the system Na₂O-SiO₂-H₂O was determined by locating the univariant phase boundary, melt = melt + vapor in the 0.8-2 GPa and 1000°-1300°C pressure and temperature range, respectively. The NBO/Si-range of the melts (0.25-1) was chosen to cover that of most natural magmatic liquids. The H₂O solubility in melts in the system Na₂O-SiO₂-H₂O (X_H2O) ranges between 18 and 45 mol% (O = 1) with (∂X_H2O/∂P)_T∼14-18 mol% H₂O/GPa. The (∂X_H2O/∂P)_T is negatively correlated with NBO/Si (= Na/Si) of the melt. The (∂X_H2O/∂T)_P is in the −0.03 to +0.05 mol% H₂O/°C range, and is negatively correlated with NBO/Si. The [∂X_H2O/∂(NBO/Si)]_P,T is in the −3 to −8 mol% H₂O/(NBO/Si) range. Melts with NBO/Si similar to basaltic liquids (∼0.6-∼1.0) show (∂X_H2O/∂T)_P<0, whereas more polymerized melts exhibit (∂X_H2O/∂T)_P>0. Complete miscibility between hydrous melt and aqueous fluid occurs in the 0.8-2 GPa pressure range for melts with NBO/Si ≤0.5 at T >1100°C. Miscibility occurs at lower pressure the more polymerized the melt.     

Solubility products of amorphous ferric arsenate and crystalline scorodite (FeAsO4 · 2H2O) and their application to arsenic behavior in buried mine tailings

Published solubility data for amorphous ferric arsenate and scorodite have been reevaluated using the geochemical code PHREEQC with a modified thermodynamic database for the arsenic species. Solubility product calculations have emphasized measurements obtained under conditions of congruent dissolution of ferric arsenate (pH < 3), and have taken into account ion activity coefficients, and ferric hydroxide, ferric sulfate, and ferric arsenate complexes which have association constants of 10^4.04 (FeH₂AsO₄²⁺), 10^9.86 (FeHAsO₄⁺), and 10^18.9 (FeAsO₄). Derived solubility products of amorphous ferric arsenate and crystalline scorodite (as log K_sp) are −23.0 ± 0.3 and −25.83 ± 0.07, respectively, at 25 °C and 1 bar pressure. In an application of the solubility results, acid raffinate solutions (molar Fe/As = 3.6) from the JEB uranium mill at McClean Lake in northern Saskatchewan were neutralized with lime to pH 2-8. Poorly crystalline scorodite precipitated below pH 3, removing perhaps 98% of the As(V) from solution, with ferric oxyhydroxide (FO) phases precipitated starting between pH 2 and 3. Between pH 2.18 and 7.37, the apparent log K_sp of ferric arsenate decreased from −22.80 to −24.67, while that of FO (as Fe(OH)₃) increased from −39.49 to −33.5. Adsorption of As(V) by FO can also explain the decrease in the small amounts of As(V)(aq) that remain in solution above pH 2-3. The same general As(V) behavior is observed in the pore waters of neutralized tailings buried for 5 yr at depths of up to 32 m in the JEB tailings management facility (TMF), where arsenic in the pore water decreases to 1-2 mg/L with increasing age and depth. In the TMF, average apparent log K_sp values for ferric arsenate and ferric hydroxide are −25.74 ± 0.88 and −37.03 ± 0.58, respectively. In the laboratory tests and in the TMF, the increasing crystallinity of scorodite and the amorphous character of the coexisting FO phase increases the stability field of scorodite relative to that of the FO to near-neutral pH values. The kinetic inability of amorphous FO to crystallize probably results from the presence of high concentrations of sulfate and arsenate.     

Solubility of Fe-ettringite (Ca6[Fe(OH)6]2(SO4)3 · 26H2O)

The solubility of Fe-ettringite (Ca₆[Fe(OH)₆]₂(SO₄)₃ · 26H₂O) was measured in a series of precipitation and dissolution experiments at 20 °C and at pH-values between 11.0 and 14.0 using synthesised material. A time-series study showed that equilibrium was reached within 180 days of ageing. After equilibrating, the solid phases were analysed by XRD and TGA while the aqueous solutions were analysed by ICP-OES (calcium, sulphur) and ICP-MS (iron). Fe-ettringite was found to be stable up to pH 13.0. At higher pH-values Fe-monosulphate (Ca₄[Fe(OH)₆]₂(SO₄) · 6H₂O) and Fe-monocarbonate (Ca₄[Fe(OH)₆]₂(CO₃) · 6H₂O) are formed. The solubilities of these hydrates at 25 °C are:      

An isopiestic study of aqueous NaBr and KBr at 50 °C: Chemical equilibrium model of solution behavior and solubility in the NaBr-H2O, KBr-H2O and Na-K-Br-H2O systems to high concentration and temperature

The isopiestic method has been used to determine the osmotic coefficients of the binary solutions NaBr-H₂O (from 0.745 to 5.953 mol kg⁻¹) and KBr-H₂O (from 0.741 to 5.683 mol kg⁻¹) at the temperature t = 50 °C. Sodium chloride solutions have been used as isopiestic reference standards. The isopiestic results obtained have been combined with all other experimental thermodynamic quantities available in literature (osmotic coefficients, water activities, bromide mineral’s solubilities) to construct a chemical model that calculates solute and solvent activities and solid-liquid equilibria in the NaBr-H₂O, KBr-H₂O and Na-K-Br-H₂O systems from dilute to high solution concentration within the 0-300 °C temperature range. The Harvie and Weare [Harvie C., and Weare J. (1980) The prediction of mineral solubilities in naturalwaters: the Na-K-Mg-Ca-Cl-SO₄-H₂O system from zero to high concentration at 25 °C. Geochim. Cosmochim. Acta44, 981-997] solubility modeling approach, incorporating their implementation of the concentration-dependent specific interaction equations of Pitzer [Pitzer K. (1973) Thermodynamics of electrolytes. I. Theoretical basis and general equations. J. Phys. Chem.77, 268-277] is employed. The model for binary systems is validated by comparing activity coefficient predictions with those given in literature, and not used in the parameterization process. Limitations of the mixed solutions model due to data insufficiencies are discussed. This model expands the variable temperature sodium-potassium model of Greenberg and Moller [Greenberg J., and Moller N. (1989) The prediction of mineral solubilities in natural waters: a chemical equilibrium model for the Na-K-Ca-Cl-SO₄-H₂O system to high concentration from 0 to 250 °C. Geochim. Cosmochim. Acta53, 2503-2518] by evaluating Br⁻ pure electrolyte and mixing solution parameters and the chemical potentials of three bromide solid phases: NaBr-2H₂O (cr), NaBr (cr) and KBr (cr).     

The measurement of sulfate mineral solubilities in the Na-K-Ca-Cl-SO4-H2O system at temperatures of 100, 150 and 200°C

At T > 100°C development of thermodynamic models suffers from missing experimental data, particularly for solubilities of sulfate minerals in mixed solutions. Solubilities in Na⁺-K⁺-Ca²⁺-Cl⁻-SO₄²⁻/H₂O subsystems were investigated at 150, 200°C and at selected compositions at 100°C. The apparatus used to examine solid-liquid phase equilibria under hydrothermal conditions has been described.In the system NaCl-CaSO₄-H₂O the missing anhydrite (CaSO₄) solubilities at high NaCl concentrations up to halite saturation have been determined. In the system Na₂SO₄-CaSO₄-H₂O the observed glauberite (Na₂SO₄ · CaSO₄) solubility is higher than that predicted by the high temperature model of Greenberg and Møller (1989), especially at 200°C. At high salt concentrations, solubilities of both anhydrite and glauberite increase with increasing temperature. Stability fields of the minerals syngenite (K₂SO₄ · CaSO₄ · H₂O) and goergeyite (K₂SO₄ · 5 CaSO₄ · H₂O) were determined, and a new phase was found at 200°C in the K₂SO₄-CaSO₄-H₂O system. Chemical and single crystal structure analysis give the formula K₂SO₄ · CaSO₄. The structure is isostructural with palmierite (K₂SO₄ · PbSO₄). The glaserite (“3 K₂SO₄ · Na₂SO₄”) appears as solid solution in the system Na₂SO₄-K₂SO₄-H₂O. Its solubility and stoichiometry was determined as a function of solution composition.     

Solubilities of corundum, wollastonite and quartz in H2O-NaCl solutions at 800 °C and 10 kbar: Interaction of simple minerals with brines at high pressure and temperature

Solubilities of corundum (Al₂O₃) and wollastonite (CaSiO₃) were measured in H₂O-NaCl solutions at 800 °C and 10 kbar and NaCl concentrations up to halite saturation by weight-loss methods. Additional data on quartz solubility at a single NaCl concentration were obtained as a supplement to previous work. Single crystals of synthetic corundum, natural wollastonite or natural quartz were equilibrated with H₂O and NaCl at pressure (P) and temperature (T) in a piston-cylinder apparatus with NaCl pressure medium and graphite heater sleeves. The three minerals show fundamentally different dissolution behavior. Corundum solubility undergoes large enhancement with NaCl concentration, rising rapidly from Al₂O₃ molality (m_Al2O3) of 0.0013(1) (1σ error) in pure H₂O and then leveling off to a maximum of ∼0.015 at halite saturation (X_NaCl ≈ 0.58, where X is mole fraction). Solubility enhancement relative to that in pure H₂O, , passes through a maximum at X_NaCl ≈ 0.15 and then declines towards halite saturation. Quenched fluids have neutral pH at 25 °C. Wollastonite has low solubility in pure H₂O at this P and T(m_CaSiO3=0.0167(6)). It undergoes great enhancement, with a maximum solubility relative to that in H₂O at X_NaCl ≈ 0.33, and solubility >0.5 molal at halite saturation. Solute silica is 2.5 times higher than at quartz saturation in the system H₂O-NaCl-SiO₂, and quenched fluids are very basic (pH 11). Quartz shows monotonically decreasing solubility from m_SiO2=1.248 in pure H₂O to 0.202 at halite saturation. Quenched fluids are pH neutral. A simple ideal-mixing model for quartz-saturated solutions that requires as input only the solubility and speciation of silica in pure H₂O reproduces the data and indicates that hydrogen bonding of molecular H₂O to dissolved silica species is thermodynamically negligible. The maxima in for corundum and wollastonite indicate that the solute products include hydrates and Na⁺ and/or Cl⁻ species produced by molar ratios of reactant H₂O to NaCl of 6:1 and 2:1, respectively. Our results imply that quite simple mechanisms may exist in the dissolution of common rock-forming minerals in saline fluids at high P and T and allow assessment of the interaction of simple, congruently soluble rock-forming minerals with brines associated with deep-crustal metamorphism.     

Kinetics of the reaction MgO + Al2O3 → MgAl2O4 and Al-Mg interdiffusion in spinel at 1200 to 2000°C and 1.0 to 4.0 GPa

The rate of spinel (MgAl₂O₄) growth at the interface between MgO and Al₂O₃ was investigated systematically at temperatures of 1200° to ∼2000°C and pressures between 1.0 and 4.0 GPa with a solid-media, piston-cylinder apparatus. As reported in previous 1-atm studies, the thickness (ΔX) of the spinel layer increases linearly with the square root of time for experiments differing only in duration, irrespective of pressure-temperature (P-T) conditions. The reaction rate constant (k = ΔX²/2t) is log-linear in 1/T and also in pressure. The apparent activation energy of 410 kJ/mol is independent of pressure; the apparent activation volume increases systematically with increasing temperature. Electron microprobe traverses across the spinel layer reveal a significant Al excess and charge-compensating Mg deficit near the spinel/corundum interface. This nonstoichiometry is promoted by high temperatures (>1500°C), suppressed by high pressures and varies linearly across the spinel to a near-stoichiometric composition at the interface with periclase. The Al and Mg composition gradients can be used to extract interdiffusion coefficients for Al ↔ Mg exchange through the spinel, which are described by D?=2.5×10⁻⁶ exp(−28200/T) m²sThese diffusivities differ substantially from the reaction rate constant k, reflecting the fact that k is a combination of the diffusivity and the reaction potential as indicated by the difference in spinel composition across the spinel layer (i.e., coexisting with corundum vs. coexisting with periclase). A simple model can be used to separate the two effects and show that the reaction potential (i.e., the MgO-Al₂O₃ phase diagram) is sensitive to changes in both temperature and pressure, whereas the governing diffusivity depends only on temperature.     

CO2 transfer between the upper mantle and the atmosphere: temporary storage in the lower continental crust

The CO₂ atmospheric content has shown large variations over geological times. High contents (up to one order of magnitude more than present-day values) ultimately correspond to discrete episodes of mantle degassing, either juvenile, or subduction-related (carbon recycling). A number of arguments (e.g. the continuous volume increase of carbonate-bearing sediments with time) suggest that, throughout the Earth's history, juvenile CO₂ has formed a major contribution to the global carbon budget of the Earth.
The absence of a direct relationship between major volcanic episodes and the average CO₂ atmospheric content suggests that volcanoes might not be the only way by which mantle CO₂ is transported to the surface. It is proposed that large quantities of juvenile CO₂ could temporarily be stored in the lower continental crust during major episodes of granulite formation. These are primarily caused by magmatic underplating and they result in a vertical accretion of the crust by accumulation of CO₂-bearing, mantle-derived magmas. Most of the CO₂ migrates through the crust during post-metamorphic evolution and isostatic restoration of the normal continental thickness. However, large quantities of CO₂ can still be present in some areas, notably as high-density fluids enclosed in minerals.     

Oxygen isotope exchange between H2O and CO2 at elevated CO2 pressures: Implications for monitoring of geological CO2 storage

Traditionally, the application of stable isotopes in Carbon Capture and Storage (CCS) projects has focused on δ¹³C values of CO₂ to trace the migration of injected CO₂ in the subsurface. More recently the use of δ¹⁸O values of both CO₂ and reservoir fluids has been proposed as a method for quantifying in situ CO₂ reservoir saturations due to O isotope exchange between CO₂ and H₂O and subsequent changes in δ¹⁸O_H2O values in the presence of high concentrations of CO₂. To verify that O isotope exchange between CO₂ and H₂O reaches equilibrium within days, and that δ¹⁸O_H2O values indeed change predictably due to the presence of CO₂, a laboratory study was conducted during which the isotope composition of H₂O, CO₂, and dissolved inorganic C (DIC) was determined at representative reservoir conditions (50 °C and up to 19 MPa) and varying CO₂ pressures. Conditions typical for the Pembina Cardium CO₂ Monitoring Pilot in Alberta (Canada) were chosen for the experiments. Results obtained showed that δ¹⁸O values of CO₂ were on average 36.4 ± 2.2‰ (1σ, n = 15) higher than those of water at all pressures up to and including reservoir pressure (19 MPa), in excellent agreement with the theoretically predicted isotope enrichment factor of 35.5‰ for the experimental temperatures of 50 °C. By using ¹⁸O enriched water for the experiments it was demonstrated that changes in the δ¹⁸O values of water were predictably related to the fraction of O in the system sourced from CO₂ in excellent agreement with theoretical predictions. Since the fraction of O sourced from CO₂ is related to the total volumetric saturation of CO₂ and water as a fraction of the total volume of the system, it is concluded that changes in δ¹⁸O values of reservoir fluids can be used to calculate reservoir saturations of CO₂ in CCS settings given that the δ¹⁸O values of CO₂ and water are sufficiently distinct.     

Iron weathering products in a CO2 + (H2O or H2O2) atmosphere: Implications for weathering processes on the surface of Mars

Various iron-bearing primary phases and rocks have been weathered experimentally to simulate possible present and past weathering processes occurring on Mars. We used magnetite, monoclinic and hexagonal pyrrhotites, and metallic iron as it is suggested that meteoritic input to the martian surface may account for an important source of reduced iron. The phases were weathered in two different atmospheres: one composed of CO₂ + H₂O, to model the present and primary martian atmosphere, and a CO₂ + H₂O + H₂O₂ atmosphere to simulate the effect of strong oxidizing agents. Experiments were conducted at room temperature and a pressure of 0.75 atm. Magnetite is the only stable phase in the experiments and is thus likely to be released on the surface of Mars from primary rocks during weathering processes. Siderite, elemental sulfur, ferrous sulfates and ferric (oxy)hydroxides (goethite and lepidocrocite) are the main products in a water-bearing atmosphere, depending on the substrate. In the peroxide atmosphere, weathering products are dominated by ferric sulfates and goethite. A kinetic model was then developed for iron weathering in a water atmosphere, using the shrinking core model (SCM). This model includes competition between chemical reaction and diffusion of reactants through porous layers of secondary products. The results indicate that for short time scales, the mechanism is dominated by a chemical reaction with second order kinetics (k = 7.75 × 10⁻⁵ g⁻¹/h), whereas for longer time scales, the mechanism is diffusion-controlled (De_A = 2.71 × 10⁻¹⁰ m²/h). The results indicate that a primary CO₂- and H₂O-rich atmosphere should favour sulfur, ferrous phases such as siderite or Fe²⁺-sulfates, associated with ferric (oxy)hydroxides (goethite and lepidocrocite). Further evolution to more oxidizing conditions may have forced these precursors to evolve into ferric sulfates and goethite/hematite.