Differentiation of charcoal,soot and diagenetic carbon in soil: Method comparison and perspectives

The various sources of pyrogenic and coalified carbon (black carbon, BC) in soil have considerable structural heterogeneity, making the quantification of BC a challenge. This study was aimed at evaluating the capability of different detection procedures to recover different types of BC from soil. We added defined quantities of urban dust (UD, NIST SRM1649a), diesel particulate matter (DPM, NIST SRM2975), charcoal, lignite, bituminous coal and wood to four topsoil samples. Mixtures were analyzed by way of chemo-thermal oxidation (CTO), thermal gradient oxidation (ThG), the benzene polycarboxylic acid method (BPCA) and mid-infrared spectroscopy (MIRS). CTO returned good quantification of soot BC in the pure DPM, yet the recovery of soot BC from soil was unsatisfactory (18–270%). ThG gave good precision but lower values for pure soot BC. It severely overestimated the BC content for all soil-standard mixtures. The BPCA method gave a low return for soot BC, but for the spiked soil it reliably detected charcoal and coalified C (69–107% avg. recovery) but underestimated soot BC (52–90% recovery of DPM). Linear coherence in specific MIR vibrations was found in one component soil-BC mixtures for each BC type. Applying these standard calibrations to multi-component mixtures allowed detecting charcoal and a quantification of soot BC (88% avg. recovery) via MIRS, but ignored the presence of diagenetic C. We see the greatest potential in differentiating soot from charcoal in soil by employing a combination of chemical and thermal oxidation and MIRS, while the differentiation from diagenetic C is not possible yet.     

δ98/95Mo values and Molybdenum Concentration Data for NIST SRM 610, 612 and 3134: Towards a Common Protocol for Reporting Mo Data

Molybdenum concentration and δ^98/95Mo values for NIST SRM 610 and 612 (solid glass), NIST SRM 3134 (lot 891307; liquid) and IAPSO seawater reference material are presented based on comparative measurements by MC‐ICP‐MS performed in laboratories at the Universities of Bern and Oxford. NIST SRM 3134 and NIST SRM 610 and 612 were found to have identical and homogeneous ⁹⁸Mo/⁹⁵Mo ratios at a test portion mass of 0.02 g. We suggest, therefore, that NIST SRM 3134 should be used as reference for the δ–Mo notation and to employ NIST SRM 610 or 612 as solid silicate secondary measurement standards, in the absence of an isotopically homogeneous solid geological reference material for Mo. The δ^98/95Mo_{JMC Bern} composition (Johnson Matthey ICP standard solution, lot 602332B as reference) of NIST SRM 3134 was 0.25 ± 0.09‰ (2s). Based on five new values, we determined more precisely the mean open ocean δ^98/95Mo_{SRM 3134} value of 2.09 ± 0.07‰, which equals the value of δ^98/95Mo_{JMC Bern} of 2.34 ± 0.07‰. We also refined the Mo concentration data for NIST SRM 610 to 412 ± 9 μg g^?1 (2s) and NIST SRM 612 to 6.4 ± 0.7 μg g^?1 by isotope dilution. We propose these concentration data as new working values, which allow for more accurate in situ Mo determination using laser ablation ICP‐MS or SIMS.     

The transformation and mobility of charcoal in a fire-impacted watershed

The incomplete combustion of fossil fuels and biomass has resulted in the global-scale distribution and accumulation of black carbon (BC) in the environment. Recently, the molecular identity of BC in the dissolved phase has been distinguished from that of natural organic matter. However, many of the processes that control BC cycling remain unidentified. We investigate changes in soil charcoal particle morphology and chemical composition using surface area analysis, scanning electron microscopy, energy dispersive X-ray spectroscopy, chemical oxidation, and ¹³C NMR spectroscopy. A comparison of soil charcoals differing in age by 100 years shows that aged charcoal has lower specific surface areas, higher BC/OC ratios, direct associations with soil minerals and microbial biomass, and a greater abundance of non-aromatic carbon. The water-soluble portion of soil charcoal and dissolved organic matter (DOM) from the watershed were also characterized by electrospray ionization mass spectrometry. Aqueous charcoal extracts are comprised mostly of condensed aromatic ring structures (CARS) which are also present in soil pore, river, and ground water samples. We present indirect evidence and a chemical rationale for a microbial BC dissolution mechanism. Furthermore, the speciation of CARS in the soil solution versus river and ground water provides molecular evidence of reactivity in the dissolved phase. The dissolution and export of soil BC are presently unmeasured fluxes with important implications for the global carbon cycle.     

Lead Isotope Homogeneity of NIST SRM 610 and 612 Glass Reference Materials: Constraints from Laser Ablation Multicollector ICP-MS (LA-MC-ICP-MS) Analysis

This contribution presents data for laser ablation multicollector ICP‐MS (LA‐MC‐ICP‐MS) analyses of NIST SRM 610 and 612 glasses with the express purpose of examining the Pb isotope homogeneity of these glasses at the ～ 100 μm spatial scale, relevant to in situ analysis. Investigation of homogeneity at these scales is important as these glasses are widely used as calibrators for in situ measurements of Pb isotope composition. Results showed that at the levels of analytical uncertainty obtained, there was no discernable heterogeneity in Pb isotope composition of NIST SRM 610 and also most probably for NIST SRM 612. Traverses across the ～ 1.5 mm glass wafers supplied by NIST, consisting of between 75 and 133 individual measurements, showed no compositional outliers at the two standard deviation level beyond those expected from population statistics. Overall, the measured Pb isotope ratios from individual traverses across NIST SRM 610 and 612 wafers closely approximate single normally‐distributed populations, with standard deviations similar to the average internal uncertainty for individual measurement blocks. Further, Pb isotope ratios do not correlate with Tl/Pb ratios measured during the analysis, suggesting that regions of volatile element depletion (marked by low Tl/Pb) in these glasses are not associated with changes in Pb isotope composition. For NIST SRM 610 there also appeared to be no variation in Pb isotope composition related to incomplete mixing of glass base and trace element spike during manufacture. For NIST SRM 612 there was some dispersion of measured ratios, including some in a direction parallel to the expected mixing line for base‐spike mixing. However, there was no significant correlation parallel to the mixing line. At this time this cannot be unequivocally demonstrated to result from glass heterogeneity, but it is suggested that NIST SRM 610 be preferred for standardising in situ Pb isotope measurements. Data from this study also showed significantly better accuracy and somewhat better precision for ratios corrected for mass bias by external normalisation to Pb isotope ratios measured in bracketing calibrators compared to mass bias corrected via internal normalisation to measured ²⁰⁵Tl/²⁰³Tl, although the Tl isotopic composition of both glasses appears to be homogeneous.     

Isotope Dilution Determinations of Lu,Hf, Zr,Ta and W,and Hf Isotope Compositions of NIST SRM 610 and 612 Glass Wafers

Isotope dilution determinations of Lu, Hf, Zr, Ta and W are reported for nine test portions (five for W) of NIST SRM 610 and 612 glass wafers. Additionally, all test portions were analysed for their Hf isotope compositions. In general, high field strength elemental (HFSE) distributions in NIST SRM 610 and 612 were reproducible to ～± 1%, except for Zr (± 5%) in NIST SRM 612, and absolute reported concentrations agreed with previously published values, but with higher precision. The slightly worse reproducibility of Zr in NIST SRM 612 compared to other HFSE is interpreted to result from analytical scatter, rather than sample inhomogeneity. The analyses demonstrated elemental homogeneity for both glass wafers for samples of 1–2 mg with respect to the precision of the method, i.e., ± 1% or better. Average Hf isotope compositions for both glass wafers agreed within uncertainty and the weighted average of all determinations yielded a mean ¹⁷⁶Hf/¹⁷⁷Hf ratio of 0.282111 ± 0.000009 (95% confidence level). However, although mean values for NIST SRM 610 and 612 agreed within analytical limits, NIST SRM 610 test portions showed a tendency of systematically elevated isotope composition of ～ 0.5 _?Hf units when compared to NIST SRM 612, which may indicate a slightly more radiogenic Hf isotope composition of NIST SRM 610. The results of this study suggest that NIST SRM 610 and 612 are valuable calibrators for HFSE in situ analyses within the given uncertainties.     

珠江口及南海沉积物碳黑的放射性碳年龄

放射性碳同位素(14C)是含碳物质年代测定的有效手段,它的半衰期是5730年.研究了珠江口及南海沉积物碳黑的放射性碳年龄,碳黑样品采取化学氧化方法提取,用加速器质谱仪(AMS)测定珠江三角洲沉积柱中碳黑的放射性碳同位素剂量.研究结果表明,位于珠江口的钻孔3的碳黑的14C年龄是倒置的,邻近香港的钻孔30的碳黑14C年龄旱现老.新.老的趋势,而钻孔E2的碳黑的14C年龄则儿乎是不变的.碳黑的这种14C年龄的变化趋势与碳黑的来源相关,化石燃料来源的碳黑的增加使得碳黑的14C年龄偏老.     

NIST RM 8301 Boron Isotopes in Marine Carbonate (Simulated Coral and Foraminifera Solutions): Inter‐laboratory δ11B and Trace Element Ratio Value Assignment

The boron isotopic ratio of ¹¹B/¹⁰B (δ¹¹B_SRM951) and trace element composition of marine carbonates are key proxies for understanding carbon cycling (pH) and palaeoceanographic change. However, method validation and comparability of results between laboratories requires carbonate reference materials. Here, we report results of an inter‐laboratory comparison study to both assign δ¹¹B_SRM951 and trace element compositions to new synthetic marine carbonate reference materials (RMs), NIST RM 8301 (Coral) and NIST RM 8301 (Foram) and to assess the variance of data among laboratories. Non‐certified reference values and expanded 95% uncertainties for δ¹¹B_SRM951 in NIST RM 8301 (Coral) (+24.17‰ ± 0.18‰) and NIST RM 8301 (Foram) (+14.51‰ ± 0.17‰) solutions were assigned by consensus approach using inter‐laboratory data. Differences reported among laboratories were considerably smaller than some previous inter‐laboratory comparisons, yet discrepancies could still lead to large differences in calculated seawater pH. Similarly, variability in reported trace element information among laboratories (e.g., Mg/Ca ± 5% RSD) was often greater than within a single laboratory (e.g., Mg/Ca < 2%). Such differences potentially alter proxy‐reconstructed seawater temperature by more than 2 °C. These now well‐characterised solutions are useful reference materials to help the palaeoceanographic community build a comprehensive view of past ocean changes.     

Can pyrolysis-GC/MS be used to estimate the degree of thermal alteration of black carbon?

Very little is known about the macromolecular properties of biomass combustion residues referred to as black carbon (BC). Pyrolysis-gas chromatography–mass spectrometry (Py-GC/MS) was performed on: (i) peat from Spain at 400–1200 °C to investigate the effect of charring on pyrolysis fingerprint and (ii) natural charcoal from Laos in order to link molecular information to published chemical and reactivity parameters. Confirming earlier Py-GC/MS studies, the BC in the artificially charred peat and the natural charcoal produced predominantly benzene, toluene, C₂-benzenes, PAHs and benzonitriles. Furthermore, some charcoal samples produced significant amounts of phenols, methoxyphenols, carbohydrate markers, n-alkanes and n-alkenes upon pyrolysis, reflecting non-charred and weakly charred biomass. A series of pyrolysis product ratios related to the degree of dealkylation of the pyrolysis products (benzene/toluene, naphthalene/C₁-naphthalenes, C₁-naphthalenes/C₂-naphthalenes, benzofuran/C₁-benzofurans and benzonitrile/C₁-benzonitrile) increased with increasing artificial charring (peat) and, for the natural charcoal, these ratios were in accordance with established chemical and reactivity parameters related to charring intensity from other methods: proportion of aromatic C obtained from solid state ¹³C nuclear magnetic resonance spectroscopy (NMR), the proportion of charred material as estimated from NMR in conjunction with a molecular mixing model (NMR–MMM) and the resistance to acid dichromate oxidation. The alkyl side chains of aromatic pyrolysis products are probably inherited from short chain aliphatic C chains that cross link the predominantly aromatic building blocks of BC, and these linkages seem to disappear with increasing charring intensity. Thus, the degree of thermal alteration of BC can be discerned from the pyrolysis fragmentation pattern.     

The Calcium Isotope Composition (δ44/40Ca) of NIST SRM 915b and NIST SRM 1486

The calcium isotopic composition of NIST SRM 915b and 1486 provided by the National Institute of Standards and Technology was analysed. The δ^44/40Ca values of the two reference materials relative to NIST SRM 915a were: NIST SRM 915b =+0.72 ± 0.04‰ and NIST SRM 1486 =?1.01 ± 0.02‰. NIST SRM 1486 did not require any chemical separation prior to measurement.     

Thallium Mass Fraction and Stable Isotope Ratios of Sixteen Geological Reference Materials

Thallium stable isotope ratio and mass fraction measurements were performed on sixteen geological reference materials spanning three orders of magnitude in thallium mass fraction, including both whole rock and partially separated mineral powders. For stable isotope ratio measurements, a minimum of three independent digestions of each reference material was obtained. High‐precision trace element measurements (including Tl) were also performed for the majority of these RMs. The range of Tl mass fractions represented is 10 ng g^?1 to 16 μg g^?1, and Tl stable isotope ratios (reported for historical reasons as ε²⁰⁵Tl relative to NIST SRM 997) span the range ?4 to +2. With the exception – attributed to between‐bottle heterogeneity – of G‐2, the majority of data are in good agreement with published or certified values, where available. The precision of mean of independent measurement results between independent dissolutions suggests that, for the majority of materials analysed, a minimum digested mass of 100 mg is recommended to mitigate the impact of small‐scale powder heterogeneity. Of the sixteen materials analysed, we therefore recommend for use as Tl reference materials the USGS materials BCR‐2, COQ‐1, GSP‐2 and STM‐1; CRPG materials AL‐I, AN‐G, FK‐N, ISH‐G, MDO‐G, Mica‐Fe, Mica‐Mg and UB‐N; NIST SRM 607 and OREAS14P.     

Radiocarbon Geochemistry of Modern and Ancient Arctic Lake Systems, Baffin Island, Canada

The accuracy of Arctic lake chronologies has been assessed by measuring the¹⁴C activities of modern carbon sources and applying these isotopic mass balances to dating fossil lake materials. Small (<1 km²) shallow (<25 m) Arctic lakes with watersheds <12 km²have soil and peat stratigraphic sections with¹⁴C activities ranging from 98 to 51% Modern. The¹⁴C activity of particulate organic carbon, dissolved organic carbon, and dissolved inorganic carbon from lake and stream waters ranges from 121 to 95% Modern. The sediment–water interface of the studied lakes shows consistent¹⁴C ages of ∼1000¹⁴C yr, although the¹⁴C activity of living aquatic vegetation is 115% Modern. Radiocarbon measurements of components of the lacustrine carbon pool imply that the ∼1000¹⁴C yr age of the sediment–water interface results from deposition of¹⁴C-depleted organic matter derived from the watershed.     

C 1s K-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy for characterizing functional group chemistry of black carbon

Black carbon (BC) is considered ubiquitous in soil organic matter (OM) and therefore plays an important role in soil biogeochemistry. Its complexity, particularly within environmental matrices, presents a challenge for research, primarily as a result of techniques which may favor detection of certain functional group types rather than capturing total sample C. The objective of this study was to utilize carbon (C) 1s near edge X-ray absorption fine edge structure (NEXAFS) spectroscopy to characterize the C chemistry of a broad range of BC materials. Characteristic resonances in the NEXAFS spectra allowed direct molecular speciation of the total C chemistry of the reference materials, environmental matrices and potentially interfering materials, obtained from an earlier BC ring trial. Spectral deconvolution was used to further identify the functional group distribution of the materials. BC reference materials and soils were characterized by a large aromatic C region comprising around 40% of total absorption intensity. We were able to distinguish shale and melanoidin from BC reference materials on the basis of their unique spectral characteristics. However, bituminous coal shared chemical characteristics with BC reference materials, namely high aromaticity of more than 40% identified by way of a broad peak. Lignite also shared similar spectra and functional group distributions to BC reference materials and bituminous coal. We compared the results of spectral deconvolution with the functional group distributions obtained by way of direct polarization magic angle spinning (DPMAS) ¹³C nuclear magnetic resonance (NMR) spectroscopy. Correlations between aromatic type C values for DPMAS ¹³C NMR and NEXAFS gave r² = 0.633 (p < 0.05) and the values for NEXAFS were around 30–40% lower than for ¹³C NMR. Correlations were also drawn between the aromatic C/O-alkyl C ratio values for the two methods (r² = 0.49, p < 0.05). Overall, NEXAFS was applicable for a wide range of environmental materials, such as those measured, although some limitations for the technique were addressed.     

High‐Precision Measurement of Stable Cr Isotopes in Geological Reference Materials by a Double‐Spike TIMS Method

Chromium (Cr) isotopes have been widely used in various fields of Earth and planetary sciences. However, high‐precision measurements of Cr stable isotope ratios are still challenged by difficulties in purifying Cr and organic matter interference from resin using double‐spike thermal ionisation mass spectrometry. In this study, an improved and easily operated two‐column chemical separation procedure using AG50W‐X12 (200–400 mesh) resin is introduced. This resin has a higher cross‐linking density than AG50W‐X8, and this higher density generates better separation efficiency and higher saturation. Organic matter from the resin is a common cause of inhibition of the emission of Cr during analysis by TIMS. Here, perchloric and nitric acids were utilised to eliminate organic matter interference. The Cr isotope ratios of samples with lower Cr contents could be measured precisely by TIMS. The long‐term intermediate measurement precision of δ^53/52Cr_{NIST SRM 979} for BHVO‐2 is better than ± 0.031‰ (2s) over one year. Replicated digestions and measurements of geological reference materials (OKUM, MUH‐1, JP‐1, BHVO‐1, BHVO‐2, AGV‐2 and GSP‐2) yield δ^53/52Cr_{NIST SRM 979} results ranging from ?0.129‰ to ?0.032‰. The Cr isotope ratios of geological reference materials are consistent with the δ^53/52Cr_{NIST SRM 979} values reported by previous studies, and the measurement uncertainty (± 0.031‰, 2s) is significantly improved.     

Measuring Hg Isotopes in Bio-Geo-Environmental Reference Materials

With the emergence of new analytical techniques and the expansion of scientific fields explored by using mercury isotopes, the community needs reference materials (RM) to validate and assure the accuracy of the results. The present work investigates (1) the characterisation of secondary RM in order to validate analytical systems, (2) the effects of two complex matrices on isotopic determination using stannous chloride cold vapour generation coupled to MC-ICP-MS (CV-MC-ICP-MS), (3) the effects of multiple digestion techniques for total Hg extraction and (4) the characterisation of nine geo-bio-environmental RM. Two secondary mono-elemental RMs analysed using two different analytical setups yielded isotopic compositions on δ²⁰²Hg of −3.54 ± 0.27‰ (CRPG-F65A, 2SD, n = 38) and +2.59 ± 0.19‰ (CRPG-RL24H, 2SD, n = 30) relative to the CRM NIST SRM 3133. These two RMs cover the whole range of Hg isotopic fractionation in natural samples and are made available to the scientific community. Complex fly ash and hydroxysulfate green rust matrices were synthesised, spiked with NIST SRM 3133, then digested and finally analysed versus the mono-elemental NIST SRM 3133 to show potential effect of these complex matrices during CV-MC-ICP-MS. Three digestions techniques, including traditional acid digestion, microwave digestion and high pressure-high temperature digestion, were applied to the lichen RM BCR-482 in order to compare advantages and drawbacks of these methods. Finally, the isotopic compositions of nine RMs including soils (NIST SRM 2711; GXR-2; GSS-4), sediment (GSD-10), jasperoid (GXR-1), ore deposit (GXR-3), fly ashes (BCR-176; BCR-176R) and lichen (BCR-482) are reported. These selected materials have δ²⁰²Hg values ranging from −1.75‰ to +0.11‰. Some RMs also presented mass-independent fractionation with Δ¹⁹⁹Hg and Δ²⁰¹Hg of up to −0.6‰.     

Potential contributions of asphalt and coal tar to black carbon quantification in urban dust, soils, and sediments

Measurements of black carbon (BC) using either chemical or thermal oxidation methods are generally thought to indicate the amount of char and/or soot present in a sample. In urban environments, however, asphalt and coal-tar particles worn from pavement are ubiquitous and, because of their pyrogenic origin, could contribute to measurements of BC. Here we explored the effect of the presence of asphalt and coal-tar particles on the quantification of BC in a range of urban environmental sample types, and evaluated biases in the different methods used for quantifying BC. Samples evaluated were pavement dust, residential and commercial area soils, lake sediments from a small urban watershed, and reference materials of asphalt and coal tar. Total BC was quantified using chemical treatment through acid dichromate (Cr₂O₇) oxidation and chemo-thermal oxidation at 375 °C (CTO-375). BC species, including soot and char/charcoal, asphalt, and coal tar, were quantified with organic petrographic analysis. Comparison of results by the two oxidation methods and organic petrography indicates that both coal tar and asphalt contribute to BC quantified by Cr₂O₇ oxidation, and that coal tar contributes to BC quantified by CTO-375. These results are supported by treatment of asphalt and coal-tar reference samples with Cr₂O₇ oxidation and CTO-375. The reference asphalt is resistant to Cr₂O₇ oxidation but not to CTO-375, and the reference coal tar is resistant to both Cr₂O₇ oxidation and CTO-375. These results indicate that coal tar and/or asphalt can contribute to BC measurements in samples from urban areas using Cr₂O₇ oxidation or CTO-375, and caution is advised when interpreting BC measurements made with these methods.     

Methodological comparison for quantitative analysis of fossil and recently derived carbon in mine soils with high content of aliphatic kerogen

In mine soil, quantification of soil organic carbon (OC) derived recently from biomass decomposition is complicated by the presence of fossil (geogenic) C derived from coal, oil shale, or similar material in the overburden. The only reliable method for such measurement is ¹⁴C analysis (i.e. radiocarbon dating) using instrumentation such as accelerator mass spectrometry, which is too expensive for routine laboratory analysis. We tested two previously used and two new methods for recent C quantification and compared them with ¹⁴C AMS radiocarbon dating as a reference using a set of soil samples (n = 14) from Sokolov, Czech Republic: (i) ¹³C isotope ratio composition, (ii) cross polarization magic angle spinning ¹³C nuclear magnetic resonance (CPMAS ¹³C NMR) spectroscopy, (iii) near infrared spectroscopy (NIRS) coupled with partial least squares regression and (iv) Rock–Eval pyrolysis. Conventional methods for OC determination (dry combustion, wet dichromate oxidation, loss-on-ignition) were also compared to quantify any bias connected with their use. All the methods provided acceptable recent carbon estimates in the presence of mostly aliphatic fossil C from kerogen. However, the most accurate predictions were obtained with two approaches using Rock–Eval pyrolysis parameters as predictors, namely (i) S₂ curve components and (ii) oxygen index (OI). The S₂ curve approach is based on the lower thermal stability of recent vs. fossil organic matter. The OI approach corresponded well with ¹³C NMR spectra, which showed that samples rich in recent C were richer in carboxyl C and O-alkyl C. These two methods showed the greatest potential as routine methods for recent C quantification.     

Natural oxidation of black carbon in soils: Changes in molecular form and surface charge along a climosequence

The aim of this work was to investigate changes in molecular form and surface charge of black carbon (BC) due to long-term natural oxidation and to examine how climatic and soil factors affect BC oxidation. Black C was collected from 11 historical charcoal blast furnace sites with a geographic distribution from Quebec, Canada, to Georgia, USA, and compared to BC that was newly produced (new BC) using rebuilt historical kilns. The results showed that the historical BC samples were substantially oxidized after 130 years in soils as compared to new BC or BC incubated for one year. The major alterations by natural oxidation of BC included: (1) changes in elemental composition with increases in oxygen (O) from 7.2% in new BC to 24.8% in historical BC and decreases in C from 90.8% to 70.5%; (2) formation of oxygen-containing functional groups, particularly carboxylic and phenolic functional groups, and (3) disappearance of surface positive charge and evolution of surface negative charge after 12 months of incubation. Although time of exposure significantly increased natural oxidation of BC, a significant positive relationship between mean annual temperature (MAT) and BC oxidation (O/C ratio with r = 0.83; P < 0.01) explained that BC oxidation was increased by 87 mmole kg C⁻¹ per unit Celsius increase in MAT. This long-term oxidation was more pronounced on BC surfaces than for entire particles, and responded 7-fold stronger to increases in MAT. Our results also indicated that oxidation of BC was more important than adsorption of non-BC. Thus, natural oxidation of BC may play an important role in the effects of BC on soil biogeochemistry.     

In Situ Determination of Au and Cu in Natural Pyrite by Near‐Infrared Femtosecond Laser Ablation‐Inductively Coupled Plasma‐Quadrupole Mass Spectrometry: No Evidence for Matrix Effects

Gold and copper concentrations were determined in natural pyrite by near‐infrared femtosecond LA‐ICP‐QMS, using both sulfide reference materials (pyrrhotite Po‐726 and in‐house natural chalcopyrite Cpy‐RM) and NIST SRM 610 as external calibrators. Firstly, using NIST SRM 610 as the external calibrator, we calculated the Au concentration in Po‐726 and the Cu concentration in Cpy‐RM. The calculated concentration averages for Au and Cu were similar to the values published for Po‐726 and Cpy‐RM, respectively. Secondly, we calculated Au and Cu concentrations taking NIST SRM 610 as an unknown sample and using Po‐726 and Cpy‐RM as external calibrators. Again, the average values obtained closely reflected the preferred concentrations for NIST SRM 610. Finally, we calculated Au and Cu concentrations in natural pyrite using sulfide and silicate reference materials as external calibrators. In both cases, calculated concentrations were very similar, independent of the external calibrator used. The aforementioned data, plus the fact that we obtained very small differences in relative sensitivity values (percentage differences are between 5% and 17% for ⁵⁷Fe, ⁶³Cu and ¹⁹⁷Au) on analyses of silicate and sulfide RMs, indicate that there were no matrix effects related to the differences in material composition. Thus, it is possible to determine Au and Cu in natural sulfides using NIST silicate glasses as an external calibrator.     

Black carbon in soils from different land use areas of Shanghai,China: Level,sources and relationship with polycyclic aromatic hydrocarbons

Black carbon (BC) in soils plays a key role of carrying hydrophobic pollutants like polycyclic aromatic hydrocarbons (PAHs). However, little is known about the spatial distribution, sources of BC and its relationship with PAHs in urban soils. We studied BC, total organic carbon (TOC) and PAHs concurrently in 77 soils collected from downtown area, suburban and rural area and industrial area of Shanghai, China. BC was determined by both chemical oxidation (dichromate oxidation, BC_Cr) and chemo-thermal oxidation (CTO-375, BC_CTO). BC sources were identified qualitatively by BC/TOC concentration ratios and BC-cogenerated high molecular weight (HMW) PAH isomer ratios and quantitatively by principal component analysis followed by multiple linear regression (PCA-MLR). Results showed that BC_Cr concentration (4.65 g/kg on average) was significantly higher than BC_CTO (1.91 g/kg on average) in Shanghai soils. BC_Cr concentrations in industrial area were significantly higher than those in other two. Stronger correlation was found between PAHs and TOC, BC_Cr than that between PAHs and BC_CTO, which indicates the possibility of PAHs being carried by charcoal and other organic matters thus negating its exclusive dependence on soot. Charcoal was therefore suggested to be taken into account in studies of BC and its sorption of PAHs. BC/TOC ratios showed a mixed source of biomass burning and fossil fuel combustion. PCA scores of BC-cogenerated HMW PAHs isomer ratios in potential sources and soil samples clearly demonstrated that sources of BC in urban soils may fall into two categories: coal and biomass combustion, and traffic (oil combustion and tire wear). PCA-MLR of HMW PAHs concentrations in soil samples indicated that coal and oil combustion had the largest contribution to BC in urban soils while tire wear and biomass combustion were important in downtown and rural area, respectively, which indicated they were main sources of HMW PAHs and presumably of BC.     

Determination of the aromaticity and the degree of aromatic condensation of a thermosequence of wood charcoal using NMR

Quantifying the role of black carbon (BC) in geochemical processes is difficult due to the heterogeneous character of its chemical structure. Chestnut wood charcoal samples produced at heat treatment temperatures (HTT) from 200-1000 °C were analysed using two different solid state ¹³C NMR techniques. First, aromaticity was determined as the percentage of total signal present in the aromatic region of ¹³C direct polarisation (DP) spectra. This was found to increase through the low temperature range of 200-400 °C; at higher temperatures, aromaticity was found to be >90%. Second, aromatic condensation was determined through the measurement of the chemical shift of ¹³C_benzene sorbed to the charcoals, which is influenced by the presence of “ring currents” in the aromatic domains of the charcoals. This technique was less sensitive to molecular changes through the lower temperature range, but showed there was a smooth increase in the degree of condensation of the aromatic structures with increasing temperature through the temperature range 400-1000 °C. Ab initio molecular modelling was used to estimate the size of aromatic domains in the charcoals based on the strength of the ring currents detected. These calculations indicated that charcoals produced at temperatures below 500 °C contain aromatic domains no larger than coronene (7 ring). At higher temperatures the size of these domains rapidly increases, with structures larger than a 19 ring symmetrical PAH being predominant in charcoals produced at temperatures above 700 °C. Data from this study were found to be generally consistent with previously published measurements using the benzenepolycarboxylic acid (BPCA) molecular marker method on the same set of samples.