Crystal chemistry of selenates with mineral-like structures: VIII. Butlerite chains in the structure of K(UO<Subscript>2</Subscript>)(SeO<Subscript>4</Subscript>)(OH)(H<Subscript>2</Subscript>O)

A new potassium uranyl selenate compound K(UO₂)(SeO₄)(OH)(H₂O) has been synthesized for the first time using the technique of evaporation from water solution. Its crystal structure has been solved by direct methods (monoclinic, P2₁/c,a = 8.0413(9) Å, b = 8.0362(9) Å, c = 11.6032(14) Å, β = 106.925(2)°, V = 717.34(14) ų) and refined to R ₁ = 0.0319 (wR ₂ = 0.0824) for 1285 reflections with |F ₀| > 4σ _F . The structure consists of [(UO₂(SeO₄)(OH)(H₂O)]^? chains extending along axis b. In the chains, the uranyl pentagonal bipyramids are linked via bridged hydroxyl anions and tetrahedral oxoanions [SeO₄]^2?. Potassium ions are situated between these chains. No chains of that type have been observed in uranyl compounds earlier, but they had been detected in the structures of butlerite, parabutlerite, uklonskovite, fibroferrite, and a number of synthetic compounds.     

Crystal chemistry of selenates with mineral-like structures. IV. Crystal structure of Zn(SeO<Subscript>4</Subscript>)(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>, a new compound with a mixed framework of the variscite type

The crystal structure of a new compound Zn(SeO₄)(H₂O)₂ (orthorhombic, Pbca, a = 9.0411(13), b = 10.246(2), c = 10.3318(15) Å, V = 957.1(3) ų) has been solved by direct methods and refined to R ₁ = 0.033 on the basis of 1076 observed reflections with |F _hkl | ≥ 4σ|F _hkl |. The structure contains one independent Zn²⁺ cation coordinated by two water molecules and four oxygen atoms of selenate group. The only independent (SeO₄)^2? tetrahedral oxoanion is tetradentate, sharing its corners with four adjacent [Zn²⁺O₂(H₂O₄)]²⁺ octahedrons. The structure can be described as consisting of heteropolyhedral sheets parallel to the (001) plane and linked together into a three-dimensional network. The compound belongs to the variscite structure type and is the first structurally characterized selenate of this group.     

Crystal chemistry of selenates with mineral-like structures: VII. The structure of (H<Subscript>3</Subscript>O)[(UO<Subscript>2</Subscript>)(SeO<Subscript>4</Subscript>)(SeO<Subscript>2</Subscript>OH)] and some structural features of selenite-selenates

The crystal structure of a new compound, (H₃O)[(UO₂)(SeO₄)(SeO₂OH)] (monoclinic, P2₁/n, a = 8.6682(19), b = 10.6545(16), c = 9.846(2) Å, β = 97.881(17)°, V = 900.7(3) ų), was solved by direct methods and refined to R ₁ = 0.050. The structure contains two symmetrically different Se atoms. The Se1 site is coordinated by three O atoms as is characteristic of Se⁴⁺ cations. The Se2 site is coordinated by four O atoms and forms selenate anion SeO ₄ ^2? . The structure is based on selenite-selenate sheets [(UO₂)(SeO₄)(SeO₂OH)]^? linked by the interlayer H₃O^? ions. The sheets are parallel to (101). The structure is compared to that of schmiederite, Pb₂Cu₂(SeO₃)(SeO₄)(OH)₄.     

Crystal chemistry of selenates with mineral-like structures. VI. Hydrogen bonds in the crystal structure of [(H5O2)(H3O)(H2O)][(UO2)(SeO4)2]

The crystal structure of a new compound, [(H₅O₂)(H₃O)(H₂O)][(UO₂)(SeO₄)₂] (monoclinic, P2₁/n a = 8.3105(15), b = 11.0799(14), c = 13.227(2) Å, β = 103.880(13)°, V = 1182.4(3) ų), has been solved by direct methods and refined to R ₁ = 0.036. The structure is based on [(UO₂)(SeO₄)₂]^2? sheet complexes formed by corner-shared UO₇ pentagonal bipyramids and SeO₄ tetrahedrons. The sheets are parallel to the ( $ \bar 1 The crystal structure of a new compound, [(H₅O₂)(H₃O)(H₂O)][(UO₂)(SeO₄)₂] (monoclinic, P2₁/n a = 8.3105(15), b = 11.0799(14), c = 13.227(2) ?, β = 103.880(13)°, V = 1182.4(3) ?³), has been solved by direct methods and refined to R ₁ = 0.036. The structure is based on [(UO₂)(SeO₄)₂]²⁻ sheet complexes formed by corner-shared UO₇ pentagonal bipyramids and SeO₄ tetrahedrons. The sheets are parallel to the (01) plane. Oxonium ions and water molecules forming [(H₃O)·(H₂O)·(H₅O₂)]²⁺ complexes are interlayer. Among minerals, the existence of (H₅O₂)⁺ has been unambiguously confirmed only in rhomboclase, (H₅O₂)⁺[Fe₂(SO₄)₂(H₂O)₂]. Original Russian Text ? S.V. Krivovichev, 2008, published in Zapiski Rossiiskogo Mineralogicheskogo Obshchestva, 2008, No. 2, pp. 123–130.     

The crystal structure of alumoklyuchevskite,K<Subscript>3</Subscript>Cu<Subscript>3</Subscript>AlO<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript>

The crystal structure of the unstable mineral alumoklyuchevskite K₃Cu₃AlO₂(SO₄)₄ [monoclinic, I2, a = 18.772(7), b = 4.967(2), c = 18.468(7) Å, β = 101.66(1)°, V = 1686(1) Å] was refined to R ₁ = 0.131 for 2450 unique reflections with F ≥ 4σF _hkl. The structure is based on oxocentered tetrahedrons (OAlCu ₃ ⁷⁺ ) linked into chains via edges. Each chain is surrounded by SO₄ tetrahedrons forming a structural complex. Each complex is elongated along the b axis. This type of crystal structure was also found in other fumarole minerals of the Great Tolbachik Fissure Eruption (GTFE, Kamchatka Peninsula, Russia, 1975–1976), klyuchevskite, K₃Cu₃Fe³⁺O₂(SO₄)₄; and piypite, K₂Cu₂O(SO₄)₂.     

Thermodynamic properties,low-temperature heat-capacity anomalies,and single-crystal X-ray refinement of hydronium jarosite, (H<Subscript>3</Subscript>O)Fe<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>6</Subscript>

Crystals of hydronium jarosite were synthesized by hydrothermal treatment of Fe(III)–SO₄ solutions. Single-crystal XRD refinement with R₁=0.0232 for the unique observed reflections (|F_o| > 4_F) and wR₂=0.0451 for all data gave a=7.3559(8) Å, c=17.019(3) Å, V^o=160.11(4) cm³, and fractional positions for all atoms except the H in the H₃O groups. The chemical composition of this sample is described by the formula (H₃O)_0.91Fe_2.91(SO₄)₂[(OH)_5.64(H₂O)_0.18]. The enthalpy of formation (H^o_f) is –3694.5 ± 4.6 kJ mol^–1, calculated from acid (5.0 N HCl) solution calorimetry data for hydronium jarosite, -FeOOH, MgO, H₂O, and -MgSO₄. The entropy at standard temperature and pressure (S^o) is 438.9±0.7 J mol^–1 K^–1, calculated from adiabatic and semi-adiabatic calorimetry data. The heat capacity (C_p) data between 273 and 400 K were fitted to a Maier-Kelley polynomial C_p(T in K)=280.6 + 0.6149T–3199700T^–2. The Gibbs free energy of formation is –3162.2 ± 4.6 kJ mol^–1. Speciation and activity calculations for Fe(III)–SO₄ solutions show that these new thermodynamic data reproduce the results of solubility experiments with hydronium jarosite. A spin-glass freezing transition was manifested as a broad anomaly in the C_p data, and as a broad maximum in the zero-field-cooled magnetic susceptibility data at 16.5 K. Another anomaly in C_p, below 0.7 K, has been tentatively attributed to spin cluster tunneling. A set of thermodynamic values for an ideal composition end member (H₃O)Fe₃(SO₄)₂(OH)₆ was estimated: G^o_f= –3226.4 ± 4.6 kJ mol^–1, H^o_f=–3770.2 ± 4.6 kJ mol^–1, S^o=448.2 ± 0.7 J mol^–1 K^–1, C_p (T in K)=287.2 + 0.6281T–3286000T^–2 (between 273 and 400 K).     

Chain-type structure in the H<Subscript>2</Subscript>O maser NGC 7538N

An analysis of the H₂O maser emission toward the source NGC 7538N, which is associated with an active star-forming region, is reported. The analysis is based on 24 years of monitoring in the 1.35-cm line using the the 22-m radio telescope of the Pushchino Radio Astronomy Observatory in 1981–2005 with a spectral resolution of 0.101 km/s. Individual spectral components have been isolated, and temporal drifts in their radial velocities found. From time to time, the drifts were accompanied by velocity jumps. This can be explained if there are chains consisting of clumps of material that are elongated in the radial direction toward the star and have a radial-velocity gradient. In 1982–2005, two maser activity cycles were observed, during which the chains were activated. We propose that shocks consecutively cross the chain elements and excite maser emission in them. The longest chain, at a radial velocity of ?58 km/s, has not fewer than 15 links. For a shock velocity of 15 km/s, the chain step is estimated to be ≤1.5 AU. The chains could be located in a circumstellar disk with a width of ≤10¹⁵ cm. A structure in the form of a rotating nonuniform vortex with the rotation period of about 1.6 years has also been detected. The translational motion of the vortex may be a consequence of its orbital motion within the protoplanetary disk.     

Zinclipscombite,ZnFe<Stack><Subscript>2</Subscript><Superscript>3+</Superscript></Stack>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>2</Subscript>, a new mineral species

Zinclipscombite, a new mineral species, has been found together with apophyllite, quartz, barite, jarosite, plumbojarosite, turquoise, and calcite at the Silver Coin mine, Edna Mountains, Valmy, Humboldt County, Nevada, United States. The new mineral forms spheroidal, fibrous segregations; the thickness of the fibers, which extend along the c axis, reaches 20 μm, and the diameter of spherulites is up to 2.5 mm. The color is dark green to brown with a light green to beige streak and a vitreous luster. The mineral is translucent. The Mohs hardness is 5. Zinclipscombite is brittle; cleavage is not observed; fracture is uneven. The density is 3.65(4) g/cm³ measured by hydrostatic weighing and 3.727 g/cm³ calculated from X-ray powder data. The frequencies of absorption bands in the infrared spectrum of zinclipscombite are (cm^?1; the frequencies of the strongest bands are underlined; sh, shoulder; w, weak band) 3535, 3330sh, 3260, 1625w, 1530w, 1068, 1047, 1022, 970sh, 768w, 684w, 609, 502, and 460. The Mössbauer spectrum of zinclipscombite contains only a doublet corresponding to Fe³⁺ with sixfold coordination and a quadrupole splitting of 0.562 mm/s; Fe²⁺ is absent. The mineral is optically uniaxial and positive, ω = 1.755(5), ? = 1.795(5). Zinclipscombite is pleochroic, from bright green to blue-green on X and light greenish brown on Z (X > Z). Chemical composition (electron microprobe, average of five point analyses, wt %): CaO 0.30, ZnO 15.90, Al₂O₃ 4.77, Fe₂O₃ 35.14, P₂O₅ 33.86, As₂O₅ 4.05, H₂O (determined by the Penfield method) 4.94, total 98.96. The empirical formula calculated on the basis of (PO₄,AsO₄)₂ is (Zn_0.76Ca_0.02)_Σ0.78(Fe _1.72 ³⁺ Al_0.36)_Σ2.08[(PO₄)_1.86(AsO₄)_0.14]_Σ2.00(OH)_{1. 80} · 0.17H₂O. The simplified formula is ZnFe ₂ ³⁺ (PO₄)₂(OH)₂. Zinclipscombite is tetragonal, space group P4₃2₁2 or P4₁2₁2; a = 7.242(2) Å, c = 13.125(5) Å, V = 688.4(5) ų, Z = 4. The strongest reflections in the X-ray powder diffraction pattern (d, (I, %) ((hkl)) are 4.79(80)(111), 3.32(100)(113), 3.21(60)(210), 2.602(45)(213), 2.299(40)(214), 2.049(40)(106), 1.663(45)(226), 1.605(50)(421, 108). Zinclipscombite is an analogue of lipscombite, Fe²⁺Fe ₂ ³⁺ (PO₄)₂(OH)₂ (tetragonal), with Zn instead of Fe²⁺. The mineral is named for its chemical composition, the Zn-dominant analogue of lipscombite. The type material of zinclipscombite is deposited in the Mineralogical Collection of the Technische Universität Bergakademie Freiberg, Germany.     

Separation of H<Subscript>2</Subscript>S from CH<Subscript>4</Subscript> by polymeric membranes at different H<Subscript>2</Subscript>S concentrations

In this work, permeation of mixed gases H₂S/CH₄ through commercial polyphenylene oxide (PPO) hollow fiber and poly (ester urethane) urea (PEUU) flat membranes was studied at pressures of 345–689 kPa, at ambient temperature and at 313.15 K. Various H₂S concentrations of about 100–5000 ppm in CH₄ binary synthetic gas mixtures as well as a real natural gas sample obtained from a gas refinery containing 0.3360 mol.% H₂S (equivalent to 3360 ppm) were tested. It was observed that the permeance of components was affected by the balance between competitive sorption and plasticization effects. Separation factors of H₂S/CH₄ were in the range of 1.3–2.9, 1.8–3.1 and 2.2–4.3 at pressures of 345, 517 and 689 kPa, respectively. In the range of 101–5008 ppm of H₂S in CH₄, the effect of temperature on the separation factor was nearly negligible; however, permeances of both components of the mixtures increased with temperature. Additionally, the results obtained by PEUU membrane indicated that it was a better choice for hydrogen sulfide separation from H₂S/CH₄ mixtures than PPO. For PPO membrane, removal of hydrogen sulfide from high-concentration (up to 5008 ppm) binary mixtures of H₂S/CH₄ was compared with that of low concentration (as low as 101 ppm) through PPO. At concentrations of 101–968 ppm, plasticization was dominant compared with the competitive sorption, while for the H₂S feed concentrations of 3048 ppm, the competitive sorption effect was dominant. For H₂S concentration of 5008 ppm, the balance between these two effects played an important role for explanation of its trend.     

Fahlore thermochemistry: Gaps inside the (Cu,Ag)<Subscript>10</Subscript>(Fe,Zn)<Subscript>2</Subscript>(Sb,As)<Subscript>4</Subscript>S<Subscript>13</Subscript> cube

Possible topologies of miscibility gaps in arsenian (Cu,Ag)₁₀(Fe,Zn)₂(Sb,As)₄S₁₃ fahlores are examined. These topologies are based on a thermodynamic model for fahlores whose calibration has been verified for (Cu,Ag)₁₀(Fe,Zn)₂Sb₄S₁₃ fahlores, and conform with experimental constraints on the incompatibility between As and Ag in (Cu,Ag)₁₀(Fe,Zn)₂(Sb,As)₄S₁₃ fahlores, and with experimental and natural constraints on the incompatibility between As and Zn and the nonideality of the As for Sb substitution in Cu₁₀(Fe,Zn)₂(Sb,As)₄S₁₃ fahlores. It is inferred that miscibility gaps in (Cu,Ag)₁₀(Fe,Zn)₂As₄S₁₃ fahlores have critical temperatures several °C below those established for their Sb counterparts (170 to 185°C). Depending on the structural role of Ag in arsenian fahlores, critical temperatures for (Cu,Ag)₁₀(Fe,Zn)₂(Sb,As)₄S₁₃ fahlores may vary from comparable to those inferred for (Cu,Ag)₁₀(Fe,Zn)₂As₄S₁₃ fahlores, if the As for Sb substitution stabilizes Ag in tetrahedral metal sites, to temperatures approaching 370°C, if the As for Sb substitution results in an increase in the site preference of Ag for trigonal-planar metal sites. The latter topology is more likely based on comparison of calculated miscibility gaps with compositions of fahlores from nature exhibiting the greatest departure from the Cu₁₀(Fe,Zn)₂(Sb,As)₄S₁₃ and (Cu,Ag)₁₀(Fe,Zn)₂Sb₄S₁₃ planes of the (Cu,Ag)₁₀(Fe,Zn)₂(Sb,As)₄S₁₃ fahlore cube.     

Crystal chemistry of selenates with mineral-like structures: V. Crystal structures of (H3O)2[(UO2)(SeO4)2(H2O)](H2O)2 and (H3O)2[(UO2)(SeO4)2(H2O)](H2O), new compounds with rhomboclase and goldichite topology

The crystal structures of two new compounds (H₃O)₂[(UO₂)(SeO₄)₂(H₂O)](H₂O)₂ (1, orthorhombic, Pnma, a = 14.0328(18), b = 11.6412(13), c = 8.2146(13) Å, V = 134.9(3) ų) and (H₃O)₂[(UO₂)(SeO₄)₂(H₂O)](H₂O) (2, monoclinic, P2₁/c, a = 7.8670(12), b = 7.5357(7), c = 21.386(3) Å, β = 101.484(12)°, V = 1242.5(3) ų) have been solved by direct methods and refined to R ₁ = 0.076 and 0.080, respectively. The structures of both compounds contain sheet complexes [(UO₂)(SeO₄)₂]^2? formed by cornershared [(UO₂)O₄(H₂O)] bipyramids and SeO₄ tetrahedrons. The sheets are parallel to the (100) plane in structure 1 and to (?102) in structure 2. The [(UO₂)(SeO₄)₂(H₂O)]^2? layers are linked by hydrogen bonds via interlayer groups H₂O and H₃O⁺. The sheet topologies in structures 1 and 2 are different and correspond to the topologies of octahedral and tetrahedral complexes in rhomboclase (H₂O₂)⁺[Fe(SO₄)₂(H₂O)₂] and goldichite K[Fe(SO₄)₂(H₂O)₂](H₂O)₂, respectively.     

Crystal chemistry of natural and synthetic lead oxyhalides. Part I. Crystal structure of Pb<Subscript>13</Subscript>O<Subscript>10</Subscript>Cl<Subscript>6</Subscript>

Crystals of lead oxychloride Pb₁₃O₁₀Cl₆ have been synthesized on the basis of high-temperature solid-state reactions. The Pb₁₃O₁₀Cl₆ structure was studied using X-ray single-crystal diffraction analysis. The compound is monoclinic, and the space group is C2/c; the unit-cell dimensions are a = 16.1699(14), b = 7.0086(6), c = 23.578(2) Å, β = 97.75°, and V = 2647.6(4) ų. The structure has been solved by direct methods and refined to R ₁ = 0.0505 for 2671 observed unique reflections. The structure is a 3D framework consisting of OPb₄ tetrahedrons. Chlorine atoms are located in the framework channels. The structure contains seven symmetrically independent Pb atoms, which are coordinated by 2 to 4 O^2? and 2 to 4 Cl^? anions. The synthesized compound is compared with other natural and synthetic lead oxyhalides.     

Hydrostatic compression of galenobismutite (PbBi<Subscript>2</Subscript>S<Subscript>4</Subscript>): elastic properties and high-pressure crystal chemistry

A single-crystal sample of galenobismutite was subjected to hydrostatic pressures in the range of 0.0001 and 9 GPa at room temperature using the diamond-anvil cell technique. A series of X-ray diffraction intensities were collected at ten distinct pressures using a CCD equipped 4-circle diffractometer. The crystal structure was refined to R1(|F₀| > 4σ) values of approximately 0.05 at all pressures. By fitting a third-order Birch-Murnaghan equation of state to the unit-cell volumes V ₀ = 700.6(2) ų, K ₀ = 43.9(7) GPa and dK/dP = 6.9(3) could be determined for the lattice compression. Both types of cations in galenobismutite have stereochemically active lone electron pairs, which distort the cation polyhedra at room pressure. The cation eccentricities decrease at higher pressure but are still pronounced at 9 GPa. Galenobismutite is isotypic with CaFe₂O₄ (CF) but moves away from the idealised CF-type structure during compression. Instead of the two octahedral cation sites and one bi-capped trigonal-prismatic site, PbBi₂S₄ attains a new high-pressure structure characterised by one octahedral site and two mono-capped trigonal-prismatic sites. Analyses of the crystal structure at high pressure confirm the preference of Bi for the octahedral site and the smaller one of the two trigonal-prismatic sites.     

Ab-initio calculations of the proton location in topaz-OH,Al<Subscript>2</Subscript>SiO<Subscript>4</Subscript>(OH)<Subscript>2</Subscript>

The position of hydrogen in the structure of topaz-OH was determined by means of ab-initio quantum-mechanic calculations. Static lattice energy calculations predict the existence of four non-equivalent positions of protons, which are characterized by O4–H1... O1, O4–H2... O2, O4–H3... O3 and O4–H4... O4 hydrogen bonds. The distribution of the protons between positions of local equilibrium is controlled by the proton–proton avoidance rule and the strength of the hydrogen bonds. The most favourable configuration of hydrogen atoms is achieved for adjacent protons, which form O4–H3... O3 and O4–H4... O4 hydrogen bonds, respectively. The thermal excitation of atoms at a temperature of 55 K is large enough for the hydrogen atoms occasionally to change their positions to form O4–H1... O1 and O4–H2... O2 bonds. At ambient pressures and higher temperatures the protons are in a dynamic exchange between the allowed positions of local minima. As a consequence, for nearly room-temperature conditions, the dynamic change between different structural configurations leads to the violation of all possible symmetry elements and with that to space group #E5/E5#1. The flipping of the protons between different sites is achieved by simple rotation of the OH-dipole and does not produce any significant distortion of the framework of topaz, whose symmetry remains that of the space group Pbnm. Therefore, no reduction of symmetry has been observed in former X-ray studies on topaz-OH. Calculated IR absorption spectra of topaz-OH were found to be in good agreement with measured spectra. According to the calculations, the two favourable configurations of protons might correspond to the measured peak splitting within the OH-stretching range. An experimentally observed low-frequency band at 3520 cm^–1 was assigned to the OH-stretching of the O4–H3... O3 bond, while the band at 3600 cm^–1 was attributed to OH-stretching of the O4–H4... O4 hydrogen bond. The broad peak in FAR-IR frequency range at 100–150 cm^–1 is attributed to the stretching of H3... O3 and H4... O4 contacts. The rate of proton exchange at 670 K among different sites was estimated by ab-inito molecular dynamic simulations. The calculations predict that flipping of adjacent protons between O4–H3... O3 and O4–H4... O4 bonds at 670 K occur at a rate of about 1.96 THz.     

H<Subscript>2</Subscript>O solubility in basalt at upper mantle conditions

This study presents a new experimental approach for determining H₂O solubility in basaltic melt at upper mantle conditions. Traditional solubility experiments are limited to pressures of ~600 MPa or less because it is difficult to reliably quench silicate melts containing greater than ~10 wt% dissolved H₂O. To overcome this limitation, our approach relies on the use of secondary ion mass spectrometry to measure the concentration of H dissolved in olivine and on using the measured H in olivine as a proxy for the concentration of H₂O in the co-existing basaltic melt. The solubility of H₂O in the melt is determined by performing a series of experiments at a single pressure and temperature with increasing amounts of liquid H₂O added to each charge. The point at which the concentration of H in the olivine first becomes independent of the amount of initial H₂O content of the charge (added + adsorbed H₂O) indicates its solubility in the melt. Experiments were conducted by packing basalt powder into a capsule fabricated from San Carlos olivine, which was then pressure-sealed inside a Ni outer capsule. Our experimental results indicate that at 1000 MPa and 1200 °C, the solubility of H₂O in basaltic melt is 20.6 ± 0.9 wt% (2 × standard deviation). This concentration is considerably higher than predicted by most solubility models but defines a linear relationship between H₂O fugacity and the square of molar H₂O solubility when combined with solubility data from lower pressure experiments. Further, our solubility determination agrees with melting point depression determined experimentally by Grove et al. (2006) for the H₂O-saturated peridotite solidus at 1000 MPa. Melting point depression calculations were used to estimate H₂O solubility in basalt along the experimentally determined H₂O-saturated peridotite solidus. The results suggest that a linear relationship between H₂O fugacity and the square of molar solubility exists up to ~1300 MPa, where there is an inflection point and solubility begins to increase less strongly with increasing H₂O fugacity.     

Triplet spectra of H<Subscript>2</Subscript>O masers and protoplanetary disks

An analysis of the H₂O maser emission associated with protoplanetary disks is presented. Triplet H₂O spectra can be formed at certain stages in the evolution of Keplerian disks. The dependence of the mass of the central star in the Keplerian disk on the disk radius is derived. The calculations are based on the distribution of the water-vapor molecules (maser spots). In S140, the observed elongated maser spots (chains) with a smoothly varying line-of-sight velocity are interpreted as protoplanetary structures with a small intrinsic rotation.     

H<Subscript>2</Subscript>O diffusion in peralkaline to peraluminous rhyolitic melts

The diffusion of water in a peralkaline and a peraluminous rhyolitic melt was investigated at temperatures of 714–1,493 K and pressures of 100 and 500 MPa. At temperatures below 923 K dehydration experiments were performed on glasses containing about 2 wt% H₂O _t in cold seal pressure vessels. At high temperatures diffusion couples of water-poor (<0.5 wt% H₂O _t ) and water-rich (~2 wt% H₂O _t ) melts were run in an internally heated gas pressure vessel. Argon was the pressure medium in both cases. Concentration profiles of hydrous species (OH groups and H₂O molecules) were measured along the diffusion direction using near-infrared (NIR) microspectroscopy. The bulk water diffusivity () was derived from profiles of total water () using a modified Boltzmann-Matano method as well as using fittings assuming a functional relationship between and Both methods consistently indicate that is proportional to in this range of water contents for both bulk compositions, in agreement with previous work on metaluminous rhyolite. The water diffusivity in the peraluminous melts agrees very well with data for metaluminous rhyolites implying that an excess of Al₂O₃ with respect to alkalis does not affect water diffusion. On the other hand, water diffusion is faster by roughly a factor of two in the peralkaline melt compared to the metaluminous melt. The following expression for the water diffusivity in the peralkaline rhyolite as a function of temperature and pressure was obtained by least-squares fitting:

Compressibility of strontium orthophosphate Sr<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript> at high pressure

High pressure in situ synchrotron X-ray diffraction experiment of strontium orthophosphate Sr₃(PO₄)₂ has been carried out to 20.0 GPa at room temperature using multianvil apparatus. Fitting a third-order Birch–Murnaghan equation of state to the P–V data yields a volume of V ₀ = 498.0 ± 0.1 Å³, an isothermal bulk modulus of K _T  = 89.5 ± 1.7 GPa, and first pressure derivative of K _T ′ = 6.57 ± 0.34. If K _T ′ is fixed at 4, K _T is obtained as 104.4 ± 1.2 GPa. Analysis of axial compressible modulus shows that the a-axis (K _a  = 79.6 ± 3.2 GPa) is more compressible than the c-axis (K _c  = 116.4 ± 4.3 GPa). Based on the high pressure Raman spectroscopic results, the mode Grüneisen parameters are determined and the average mode Grüneisen parameter of PO₄ vibrations of Sr₃(PO₄)₂ is calculated to be 0.30(2).