Modeling the Factors Impacting Pesticide Concentrations in Groundwater Wells

This study examines the effect of pumping, hydrogeology, and pesticide characteristics on pesticide concentrations in production wells using a reactive transport model in two conceptual hydrogeologic systems; a layered aquifer with and without a stream present. The pumping rate can significantly affect the pesticide breakthrough time and maximum concentration at the well. The effect of the pumping rate on the pesticide concentration depends on the hydrogeology of the aquifer; in a layered aquifer, a high pumping rate resulted in a considerably different breakthrough than a low pumping rate, while in an aquifer with a stream the effect of the pumping rate was insignificant. Pesticide application history and properties have also a great impact on the effect of the pumping rate on the concentration at the well. The findings of the study show that variable pumping rates can generate temporal variability in the concentration at the well, which helps understanding the results of groundwater monitoring programs. The results are used to provide guidance on the design of pumping and regulatory changes for the long‐term supply of safe groundwater. The fate of selected pesticides is examined, for example, if the application of bentazone in a region with a layered aquifer stops today, the concentration at the well can continue to increase for 20 years if a low pumping rate is applied. This study concludes that because of the rapid response of the pesticide concentration at the drinking water well due to changes in pumping, wellhead management is important for managing pesticide concentrations.     

Well storage effect during pumping tests in an aquifer of low permeability

Abstract

Well storage effect is generally considered while interpreting pumping test data from large diameter wells. However, in an aquifer of low permeability, the well storage is found to be significant during pumping tests conducted on bore wells. The interpretation of such data gives ambiguous results unless well storage effect is taken into account. A field example is presented to illustrate the difficulty in interpretation of the pumping test data. In order to take into account the well storage effect, a finite difference approach of interpreting pumping test data is suggested.     

Multiscale characterization of a heterogeneous aquifer using an ASR operation

Heterogeneity in the physical properties of an aquifer can significantly affect the viability of aquifer storage and recovery (ASR) by reducing the recoverable proportion of low-salinity water where the ambient ground water is brackish or saline. This study investigated the relationship between knowledge of heterogeneity and predictions of solute transport and recovery efficiency by combining permeability and ASR-based tracer testing with modeling. Multiscale permeability testing of a sandy limestone aquifer at an ASR trial site showed that small-scale core data give lower-bound estimates of aquifer hydraulic conductivity (K), intermediate-scale downhole flowmeter data offer valuable information on variations in K with depth, and large-scale pumping test data provide an integrated measure of the effective K that is useful to constrain ground water models. Chloride breakthrough and thermal profiling data measured during two cycles of ASR showed that the movement of injected water is predominantly within two stratigraphic layers identified from the flowmeter data. The behavior of the injectant was reasonably well simulated with a four-layer numerical model that required minimal calibration. Verification in the second cycle achieved acceptable results given the model's simplicity. Without accounting for the aquifer's layered structure, high precision could be achieved on either piezometer breakthrough or recovered water quality, but not both. This study demonstrates the merit of an integrated approach to characterizing aquifers targeted for ASR.     

Numerical simulation of the Rhade effect in layered aquifer systems due to groundwater pumping shutoff

A series of numerical simulations using a fully coupled poroelastic numerical model is performed to analyze the so-called Rhade effect. A three-layer aquifer system composed of two aquifers separated by an aquitard, and a corresponding single-layer aquifer system composed of an equivalent lumped material are simulated for the purpose of comparison. In the numerical simulation of the layered aquifer system, the Rhade effect is observed in the aquitard and upper aquifer immediately after the stop of groundwater pumping from the lower aquifer. In contrast, the numerical simulation results of the lumped aquifer system do not show such Rhade effect throughout the entire domain during the groundwater pumping shutoff period. These numerical simulation results strongly suggest that hydraulically less permeable and mechanically more deformable aquitards that generally exist in layered aquifer systems particularly play an important role in causing the Rhade effect at the end of groundwater pumping. The Rhade effect is caused by two mechanisms: a slower hydraulic propagation (head recovery) of the unpumping stress than its mechanical propagation (extension) from the pumped aquifer into the adjacent aquitard and unpumped aquifer due to the relatively lower hydraulic conductivity of the aquitard, and an amplification of the faster mechanical propagation (excessive extension) in the lower part of the aquitard due to its relatively higher deformability. However, the unpumping stress is evenly distributed throughout the entire domain of the lumped aquifer system over time without such hydrogeomechanical mechanisms since it does not have an aquitard and hence is hydraulically and mechanically homogeneous.     

Air and water flows induced by pumping tests in unconfined aquifers with low‐permeability zones

Air flows from the atmosphere into an unconfined aquifer when the water table falls during pumping tests. Pumping test results in unconfined aquifers may be significantly affected by low‐permeability zones (LPZs) near the initial water table position, because they restrict the downward movement of air. A transient, three‐dimensional air–water two‐phase flow model is employed to investigate numerically the effects of local heterogeneity on pumping test results in unconfined aquifers. Two cases of local heterogeneities are considered herein: a LPZ around the pumping well and on one side of the pumping well. Results show that the drawdown with the LPZ is significantly greater than that of the homogeneous aquifer. The differences in drawdown are the most significant at intermediate times and gradually diminish at later times. The LPZ significantly reduces air flow from the atmosphere to the aquifer. The pore air velocity in the LPZ is very low. The air pressure at the observation point under the LPZ when air begins to enter is significantly lower than the air pressure of the homogeneous aquifer at the same point. After that, the air pressure increases quickly and then increases slowly. The time for the air pressure to reach the atmospheric pressure is significantly longer. Copyright © 2013 John Wiley & Sons, Ltd.     

The influence of geologic structures on deformation due to ground water withdrawal

A 62 day controlled aquifer test was conducted in thick alluvial deposits at Mesquite, Nevada, for the purpose of monitoring horizontal and vertical surface deformations using a high-precision global positioning system (GPS) network. Initial analysis of the data indicated an anisotropic aquifer system on the basis of the observed radial and tangential deformations. However, new InSAR data seem to indicate that the site may be bounded by an oblique normal fault as the subsidence bowl is both truncated to the northwest and offset from the pumping well to the south. A finite-element numerical model was developed using ABAQUS to evaluate the potential location and hydromechanical properties of the fault based on the observed horizontal deformations. Simulation results indicate that for the magnitude and direction of motion at the pumping well and at other GPS stations, which is toward the southeast (away from the inferred fault), the fault zone (5 m wide) must possess a very high permeability and storage coefficient and cross the study area in a northeast-southwest direction. Simulated horizontal and vertical displacements that include the fault zone closely match observed displacements and indicate the likelihood of the presence of the inferred fault. This analysis shows how monitoring horizontal displacements can provide valuable information about faults, and boundary conditions in general, in evaluating aquifer systems during an aquifer test.     

SIMPLE ANALYTICAL SOLUTIONS FOR THE HP41CV PROGRAMMABLE CALCULATOR

Abstract. Two useful programs have been developed for the Hewlett Packard HP41CV programmable calculator. The THEIS program is designed to simulate a well pumping from a confined or unconfined aquifer. Drawdown, residual drawdown, t/t₁ and t/r² are calculated. The BOUN program is designed to solve for drawdown in a well pumping from an aquifer bounded by two parallel impermeable barriers. The programs can be used in aquifer pumping test design, pumping test analysis, and aquifer response predictions.     

Effects of Improper Characterization of Aquifer Thickness on Estimates of Hydraulic Conductivity from Pumping Tests

Pumping test data for surficial aquifers are commonly analyzed under the assumption that the base of the aquifer corresponds to the bottom of the test wells (i.e., the aquifer is truncated). This practice can lead to inaccurate hydraulic conductivity estimates, resulting from the use of low saturated thickness values with transmissivity estimates, and not accounting for the effects of partially penetrating wells. Theoretical time-drawdown data were generated at an observation well in a hypothetical unconfined aquifer for various values of saturated thickness and were analyzed by standard curve-matching techniques. The base of the aquifer was assumed to be the bottom of the pumping and observation wells. The overestimation of horizontal hydraulic conductivity was found to be directly proportional to the error in assumed saturated thickness, and to the (actual) ratio of vertical to horizontal hydraulic conductivity (K_v/K_h). Inaccurately high estimates of hydraulic conductivity obtained by aquifer truncation can lead to overestimates of ground water velocity and contaminant plume spreading, narrow capture zone configuration estimates, and overestimates of available ground water resources.     

Concentration Profiles in Screened Wells under Static and Pumped Conditions

Purge and pump samples from screened wells reflect concentration averaging and contaminant redistribution by wellbore flow. These issues were assessed in a screened well at the Hanford Site by investigating the vertical profile of a technetium-99 plume in a conventional well under static and pumped conditions. Specific conductance and technetium-99 concentrations were well correlated, and this enabled measurement of specific conductance to be used as a surrogate for technetium-99 concentration. Time-series measurements were collected during purging from three specific conductance probes installed in the well at 1.2, 3.1, and 4.9 m below the static water level in a 7.7-m-deep screened well. The vertical contaminant profile adjacent to the well in the aquifer was calculated using the concentration profile in the well during pumping, the pumping flow rate, and a wellbore flow and mixing model. The plume was found to be stratified in the aquifer—the highest concentrations occurred adjacent to the upper part of the screened interval. The purge and pump sample concentrations were 41% to 58% of the calculated peak concentration in the aquifer. Plume stratification in the aquifer adjacent to the well screen became more pronounced as pumping continued. Extended pumping may have partially reversed the effect of contaminant redistribution in the aquifer by wellbore flow and allowed the stratification of the plume to be more observable. It was also found that the vertical profile of contamination in the well under static (i.e., nonpumping conditions) was not representative of the profile in the aquifer. Thus, passive or micropurge sampling techniques, which sample the wellbore water at different depths, would not yield results representative of the aquifer in this well.     

The impact of aquifer stratification on saltwater intrusion characteristics. Comprehensive laboratory and numerical study

Laboratory experiments and numerical simulations were utilized in this study to assess the impact of aquifer stratification on saltwater intrusion. Three homogeneous and six layered aquifers were investigated. Image processing algorithms facilitated the precise calculation of saltwater wedge toe length, width of the mixing zone, and angle of intrusion. It was concluded that the length of intrusion in stratified aquifers is predominantly a function of permeability contrast, total aquifer transmissivity and the number of heterogeneous layers, being positively correlated to all three. When a lower permeability layer overlays or underlays more permeable zones its mixing zone widens, while it becomes thinner for the higher permeability strata. The change in the width of the mixing zone (WMZ) is positively correlated to permeability contrast, while it applies to all strata irrespectively of their relative vertical position in the aquifer. Variations in the applied hydraulic head causes the transient widening of WMZ. These peak WMZ values are larger during saltwater retreat and are negatively correlated to the layer's permeability and distance from the aquifer's bottom. Moreover, steeper angles of intrusion are observed in cases where low permeability layers overlay more permeable strata, and milder ones in the inverse aquifer setups. The presence of a low permeability upper layer results in the confinement of the saltwater wedge in the lower part of the stratified aquifer. This occurs until a critical hydraulic head difference is applied to the system. This hydraulic gradient value was found to be a function of layer width and permeability contrast alike.     

How to Find Aquifer Statistics Utilizing Pumping Tests? Two Field Studies Using welltestpy

We present a workflow to estimate geostatistical aquifer parameters from pumping test data using the Python package welltestpy . The procedure of pumping test analysis is exemplified for two data sets from the Horkheimer Insel site and from the Lauswiesen site, Germany. The analysis is based on a semi-analytical drawdown solution from the upscaling approach Radial Coarse Graining, which enables to infer log-transmissivity variance and horizontal correlation length, beside mean transmissivity, and storativity, from pumping test data. We estimate these parameters of aquifer heterogeneity from type-curve analysis and determine their sensitivity. This procedure, implemented in welltestpy , is a template for analyzing any pumping test. It goes beyond the possibilities of standard methods, for example, based on Theis' equation, which are limited to mean transmissivity and storativity. A sensitivity study showed the impact of observation well positions on the parameter estimation quality. The insights of this study help to optimize future test setups for geostatistical aquifer analysis and provides guidance for investigating pumping tests with regard to aquifer statistics using the open-source software package welltestpy .     

Use of Improved Hydrologic Testing and Borehole Geophysical Logging Methods for Aquifer Characterization

Depth-discrete aquifer in formal ion was obtained using recently developed adaptations and improvements to conventional characterization techniques. These improvements included running neutron porosity and hulk density geophysical logging tools through a cased hole, performing an enhanced point-dilution tracer test for monitoring tracer concentration as a function of Lime and depth, and using pressure derivatives for diagnostic and quantitative analysis of constant rate discharge lest data. Data results from the use of these techniques were used to develop a conceptual model of a heterogeneous aquifer. Depth-discrete aquifer information was required to effectively design field-scale deployment and monitoring of an in situ bioremediation technology.
Geophysical logging and point-dilution tracer test results provided the relative distribution of porosity and horizontal hydraulic conductivity, respectively, with depth and correlated well. Hydraulic pumping tests were conducted to estimate mean values for transmissivity and effective hydraulic conductivity, Tracer lest and geophysical logging results indicated that ground water flow was predominant in the upper approximate 10 feet of the aquifer investigated. These results were used to delineate a more representative interval thickness for estimating effective hydraulic conductivity. Hydraulic conductivity, calculated using this representative interval, was estimated lo be 73 ft/d, approximately three limes higher than that calculated using the full length of the screened test interval.     

A GENERAL PURPOSE MICROCOMPUTER AQUIFER TEST EVALUATION TECHNIQUE

Abstract. Although determination of aquifer characteristics from pumping test data is generally carried out using type curves or other graphical techniques, a number of computer methods have been developed recently for this purpose. Based on the principle of least squares, these methods of nonlinear regression analysis can be applied to any flow system for which analytical expressions of the drawdown distribution are known. In view of the growing general interest in the application of microcomputers in ground-water hydrology, a BASIC routine has been developed for estimating any number of aquifer parameters. The least squares solution is calculated by Marquardt's algorithm, using the singular-value decomposition of the Jacobian matrix. The robust computing method obtained can be applied to all kinds of pumping tests. Aquifer characteristics as well as their standard deviations are computed with optimal speed and accuracy. The technique is demonstrated by a simple application to steady flow in a leaky aquifer and an example is provided. Other applications are easily implemented and programs for unsteady-state aquifer tests, recovery tests and multiple aquifer tests are available.     

Electrical Resistivity Studies to Delimit Zones of Acceptable Ground Water Quality

A total of four vertical electrical soundings were conducted in a layered andesitic rock aquifer known in places to yield ground water with total dissolved solids (TDS) in excess of 2,000 milligrams per liter (mg/L). The objective of the soundings was to locate zones of moderate to high permeability but with acceptable chemical quality.
The resistivity of a geologic unit is a function that includes the quantity of total dissolved solids in the interstitial water and the distribution of the water within the unit. Thus, the resistivity of most granular soils and rocks is controlled more by porosity, water content and water quality than by the conductivity of the matrix materials.
The electrical data delimited a drill site where it was believed that ground water of acceptable chemical quality could be expected. Completion and test pumping of two exploration wells confirmed the electrical sounding results.
The first test well drilled prior to the survey yielded only small amounts of ground water with total dissolved solids in excess of 2,000 mg/L. The second exploration well drilled at the site as a result of the electrical study yielded in excess of 100 gallons per minute of ground water with total dissolved solids of 830 mg/L.     

Estimating hydraulic parameters when poroelastic effects are significant

For almost 80 years, deformation-induced head changes caused by poroelastic effects have been observed during pumping tests in multilayered aquifer-aquitard systems. As water in the aquifer is released from compressive storage during pumping, the aquifer is deformed both in the horizontal and vertical directions. This deformation in the pumped aquifer causes deformation in the adjacent layers, resulting in changes in pore pressure that may produce drawdown curves that differ significantly from those predicted by traditional groundwater theory. Although these deformation-induced head changes have been analyzed in several studies by poroelasticity theory, there are at present no practical guidelines for the interpretation of pumping test data influenced by these effects. To investigate the impact that poroelastic effects during pumping tests have on the estimation of hydraulic parameters, we generate synthetic data for three different aquifer-aquitard settings using a poroelasticity model, and then analyze the synthetic data using type curves and parameter estimation techniques, both of which are based on traditional groundwater theory and do not account for poroelastic effects. Results show that even when poroelastic effects result in significant deformation-induced head changes, it is possible to obtain reasonable estimates of hydraulic parameters using methods based on traditional groundwater theory, as long as pumping is sufficiently long so that deformation-induced effects have largely dissipated.     

Hydraulic parameters of a multilayered aquifer system in Kuwait City

The Kuwait Group consists mainly of clastic sediments overlying unconformably the Dammam Formation of Tertiary age. The Kuwait Group is generally divided into three main hydrostratigraphic units: the upper and lower aquifers separated by an aquitard. The upper aquifer is further divided into the water table aquifer, an aquitard and a semiconfined aquifer. This semiconfined unit was pumped and the drawdowns were observed in piezometers screened in various subunits of the Kuwait Group. Some pumping tests of short duration were carried out in the top water table aquifer as well. These tests showed that the subunits of the Kuwait Group are hydraulically interconnected to a varying degree.

The pumping test data were analysed using conventional analytical solutions. The semiconfined pumping test was also simulated by a quasi-three-dimensional model using a leaky multiaquifer modelling technique. The initial hydraulic parameters were improved manually in the model till best fit drawdowns were obtained.

The final parameters obtained by simulation of the pumping tests were used in designing a pilot drainage system for the control of a rising groundwater table in parts of Kuwait City.     

Stream-aquifer interactions: evaluation of depletion volume and residual effects from ground water pumping

Numerical modeling techniques were used to simulate stream-aquifer interactions from seasonal ground water pumping. We used stream-aquifer models in which a shallow stream penetrates the top of an aquifer that discharges ground water to the stream as base flow. Because of the pumping, the volume of base flow discharged to the stream was reduced, and as the pumping continued, infiltration from the stream to the aquifer was induced. Both base-flow reduction and stream infiltration contributed to total stream depletion. We analyzed the depletion rates and volumes of the reduced base flow and induced stream infiltration during pumping and postpumping periods. Our results suggested that for a shallow penetrating stream with a low streambed conductance, base-flow reduction accounts for a significant percentage of the total stream depletion. Its residual effects in postpumping can last very long and may continue into the next pumping season for areas where recharge is nominal. In contrast, the contribution of the induced stream infiltration to the total stream depletion is much smaller, and its effects often become negligible shortly after pumping was stopped. For areas where surface recharge replenishes the aquifer, the residual effects of base-flow reduction and thus its depletion volume will be significantly reduced. A stream of large conductance has a high hydraulic connection to the aquifer, but the relationship between stream conductance and stream depletion is not linear.     

Finite layer method for flow in layered radial two-zone aquifer systems

A new finite layer method (FLM) is presented in this paper for transient flow analysis in layered radial two-zone aquifer systems. A radial two-zone system is an aquifer configuration in which a circular aquifer with finite radius is surrounded by a matrix possessing different permeability and storage properties. The aquifers can be pumped from fully or partially penetrating wells of infinitesimal radius. The trial function for drawdown is obtained through the use of piecewise linear correction functions in the present method. The trial function can satisfy the continuity conditions of flow and possess an appropriate continuity of C(0) at the two-zone interface. On the basis of Galerkin's method and the continuity condition of flow, the finite layer formulation is derived. The proposed method can cope with the anisotropy and layered heterogeneity in radial two-zone aquifer systems. Several numerical examples are presented to verify the validity of the present method through comparison with the analytical solution and the numerical results based on the finite difference method, in which a test of three-dimensional (3D) flow to a partially penetrating well in anisotropic two-zone aquifers is included. Furthermore, an additional application in simulating the two-zone flow in aquitard-aquifer systems is presented to demonstrate the applicability of FLM in modeling flow in more complex aquifer systems.     

The Application of Telemetry to Large-Scale Horizontal Anisotropic Permeability Determinations by Surface Tiltmeter Survey

An advanced two-way radio link (transceiver units) and data logging system have provided a powerful means of real-time series data collection and analysis. The application of this telemetry system to surface tiltmeter surveys provides significant cost savings for testing and analysis of deep, large-scale horizontal anisotropic permeability and heterogeneity determinations.
The determination of horizontal anisotropic properties requires one pumping well and eight to 10 tiltmeter monitoring stations. The validity of the depth of the test may reach 4,000 feet below land surface. With the addition of one partially penetrating observation well, the entire three-dimensional anisotropic permeability can be determined. With the addition of a fully penetrating well, the storage coefficient can be determined as well as leakage property (including vertical permeability of the confining layers). An example test case was analyzed for horizontal anisotropic permeability with remarkable success despite relatively unfavorable detection conditions.
A thorough understanding of the geology overlying the aquifer system must be made in order to assess the applicability of the surface tiltmeter survey to large-scale horizontal anisotropic permeability determinations.     

测试水井导水性能的简便试验

这种测试水井含水层导水系数的新方法是利用井口水面空气压力阶变试验,计算出聊城井含水层的导水系数为14.4m2/d,而通过抽水试验得出的导水系数为43.6m2/d,二者有相同的数量级,但新方法比抽水试验简单易行和经济快速,用它来解释地下水微动态更合理,容易推广应用