最小二乘配置方法确定局部大地水准面的研究

从最小二乘配置方法的原理出发 ,描述了最小二乘配置法中经验协方差函数的确定方法。在此基础上 ,以我国西部高山地区为例 ,利用实测点重力数据、30″× 30″数值地面模型和EGM96地球重力场模型 ,确定了该地区 2 .5′× 2 .5′大地水准面     

利用自适应最小二乘配置的GPS水准与重力似大地水准面的拟合

针对GPS水准与重力似大地水准面之差中存在系统误差的问题,使用最小二乘配置估计信号大小,来提高似大地水准面的拟合精度。对于最小二乘配置的噪声与信号的协方差之间的关系不合理,采用自适应因子纠正两者之间的关系,并首次将自适应最小二乘配置算法应用于似大地水准面精化。最后使用我国东部面积将近2万km²的城市A的数据进行验证,计算结果表明,最小二乘配置及自适应最小二乘配置在一定程度上能够提高拟合效果,使似大地水准面更接近于真实值,实现了国内较大城市面积的1.0cm检核精度的区域似大地水准面成果。     

利用MLSC法求解高程异常

运用常规的拟合模型求解大范围高程异常必然存在较大的模型误差,鉴于模型误差的不确定性,可以将模型误差看作信号采用最小二乘配置法来处理,最小二乘配置中协方差函数的确定是一个比较棘手的问题,介于此,本文提出了移动最小二乘配置法,对不同的待定点建立不同的配置模型,并通过定权的方式解决复杂的协方差函数计算问题,对一个大测区的部分GPS水准数据进行解算,获得了满意的结果。     

Kriging方法结合最小二乘配置在GPS高程拟合中的应用

本文利用Kriging方法结合最小二乘配置将GPS高程转换成正常高.研究了将Kriging方法中的变异函数用于计算最小二乘配置中的协方差的方法,并对一局部GPS水准网的高程作了拟合计算.通过将最小二乘配置法与平面拟合模型和多面函数拟合模型等进行比较,其外符合精度从最大的±0.0277m提高到±0.0162m.     

江西省现代大地基准似大地水准面精化完善

充分利用GNSS/水准点资料,运用自适应最小二乘配置方法对重力似大地水准面进行纠正,得到了分辨率为1.5′×1.5′的江西省似大地水准面模型,总体内符合精度为±1.8cm;并对江西省现代大地基准似大地水准面精化完善的模型和2004年似大地水准面精化试点的模型做了比较和分析。     

最小二乘配置法中局部协方差函数的计算

随着 GPS日益广泛的应用及精度的不断提高 ,在有些实际应用中利用 GPS来代替传统的水准测量进行高程控制已成为可能 ,这也进一步提出了对高精度大地水准面的需求。快速傅立叶变换 (FFT)是目前计算大地水准面比较常用的方法之一 ,但需要将重力观测量进行内插得到规则格网上的平均重力异常。利用最小二乘配置法计算大地水准面可直接利用已有的观测值进行计算 ,同时可综合利用不同类型的数据 ,如重力异常和垂线偏差等计算大地水准面 ,因此最小二乘配置法仍有广泛的应用 ,但制约最小二乘配置应用的关键问题是局部协方差函数的计算。将主要讨论最小二乘配置法中局部协方差函数的计算 ,使所用的协方差函数能更好地反映已知的数据 ,从而获得更精确的结果。     

区域似大地水准面精化算法及成果三维仿真研究

利用GPS水准代替繁重的几何水准测量工作,必须确定高精度、高分辨率的似大地水准面。本文分别介绍了函数模型算法、随机模型算法和综合模型算法,并基于试验区域的GPS水准数据,通过各种算法的分类计算比较,验证了这几种模型算法的有效性和可靠性,结果证明最小二乘配置算法精度较高,并对实验结果进行三维仿真,可视化的分析似大地水准面的变化。     

应用GPS水准与重力数据联合解算大地水准面

GPS水准大地水准面与重力大地水准面之差不仅由基准不同引起,而且也包含重力与GPS水准观测值的误差。建立了这两个水准面之差与基准转换参数、重力和GPS水准观测值的残差之间的关系,并基于最小二乘准则解算了基准转换参数和重力与GPS水准观测值的残差,即计算转换参数及重力与GPS观测值的改正。尤其当GPS水准精度远高于重力水准面时,联合解算模型可固定GPS水准大地水准面,只对重力观测值进行改正。     

基于EGM2008和SRTM模型确定的新疆地区似大地水准面及其精度评估

基于EGM2008重力场模型(2190阶)和SRTM数字高程模型,在Molodensky理论框架下,确定了新疆地区15′×15′似大地水准面,并与新疆地区15个点位的实测GPS/水准数据进行了比较,结果表明,所确定的新疆地区15′×15′似大地水准面的精度约为0.2m。     

利用重力成果解算GPS网点正常高

利用测区重力点成果及分布较均匀的GPS/水准成果 ,采用重力法及移去～恢复技术 ,确定测区分辨率为 2 .5′× 2 .5′的高精度大地水准面。并由此成果解算GPS网点的正常高     

应用双输入单输出法确定局部似大地水准面的实例研究

利用了双输入单输出法,融合处理了我国某地区的重力异常和地形资料两类数据,结合WDM94地球重力场模型和63个高精度GPS水准数据,计算了该区域的似大地水准面。     

贵阳市似大地水准面精化项目建设

为解决CORS系统中GNSS高程受技术条件限制精度不高的问题,贵阳市进行了区域似大地水准面精化工作。本文论述了GNSS和水准网的布设及精度,使用了3 877个点重力数据和54个GNSS水准资料,以EIGEN03C地球重力场模型作为参考重力场,由第二类Helmert凝集法完成大地水准面计算,利用球冠谐调和分析方法将GNSS水准与重力似大地水准面联合求解得出的2'!2'格网似大地水准面,在高原高差地区其精度达到"0.010 m。     

我国陆海统一似大地水准面构建的三维重力矢量法

基于重力场水平分量-垂线偏差对地形信息敏感的特点,根据边值理论由重力与地形数据确定格网垂线偏差模型,在此基础上,首先利用三维重力矢量-格网垂线偏差与格网重力异常,联合格网高程数据求得格网点间高程异常差,然后通过GPS/水准点的控制,构成紧密的几何条件,进行严密平差,从而获得高分辨率、高精度似大地水准面的数值模型。按照本文方法,利用我国6600多个GPS/水准点、1'×1'的格网垂线偏差、格网重力异常、格网高程数据,整体平差计算了我国陆海统一的似大地水准面模型,经GPS/水准点检核,全国似大地水准面的绝对精度达到了4 cm,相对精度优于7 cm。     

GPS-gravimetric geoid determination in Egypt

The main objective of this study is to improve the geoid by GPS/leveling data in Egypt. Comparisons of the gravimetric geoid with GPS/leveling data have been performed. On the basis of a gravimetric geoid fitted to GPS/leveling by the least square method, a smoothed geoid was obtained. A high-resolution geoid in Egypt was computed with a 2.5′×2.5′ grid by combining the data set of 2600 original point gravity values, 20″×30″ resolution Digital Terrain Model (DTM) grid and the spherical harmonic model EGM96. The method of computation involved the strict evaluation of the Stokes integral with 1D-FFT. The standard deviation of the difference between the gravimetric and the GPS/leveling geoid heights is ±0.47 m. The standard deviation after fitting of the gravimetric geoid to the GPS/leveling points is better than ±13 cm. In the future we will try to improve our geoid results in Egypt by increasing the density of gravimetric coverage.     

湛江市辖区似大地水准面模型的确定

简要介绍了区域似大地水准面模型的精化方法,通过基础框架网及高精度水准网的布设,利用高阶地球重力场模型EGM2008、高精度GPS、水准数据及高分辨率数字地形模型(DTM)建立了湛江市辖区分辨率为2 km×2km格网的似大地水准面模型。     

海洋重力似大地水准面与区域测高似大地水准面的拟合问题

研究了将陆地重力似大地水准面与GPS水；住似大地水准面拟合的处理方法推广到海洋的问题．首先从理论上证明了当存在海面地形．则海洋大地水准面与似大地水准面不重合．导出了在海洋上大地水；住面差距与高程异常之间差值的公式．由此给出了求定平均海面相对于区域高程基准的正常高以及测高似大地水准面的计算公式。由于测高平均海面与GPS大地高有相近的精度．提出了将海洋重力似大地水准面与区域测高似大地水准面拟合的处理方法．并利用当前最新的海面地形模型和测高平均海面模型做了数值估计。     

Local geoid determination combining gravity disturbances and GPS/levelling: a case study in the Lake Nasser area, Aswan, Egypt

 The use of GPS for height control in an area with existing levelling data requires the determination of a local geoid and the bias between the local levelling datum and the one implicitly defined when computing the local geoid. If only scarse gravity data are available, the heights of new data may be collected rapidly by determining the ellipsoidal height by GPS and not using orthometric heights. Hence the geoid determination has to be based on gravity disturbances contingently combined with gravity anomalies. Furthermore, existing GPS/levelling data may also be used in the geoid determination if a suitable general gravity field modelling method (such as least-squares collocation, LSC) is applied. A comparison has been made in the Aswan Dam area between geoids determined using fast Fourier transform (FFT) with gravity disturbances exclusively and LSC using only the gravity disturbances and the disturbances combined with GPS/levelling data. The EGM96 spherical harmonic model was in all cases used in a remove–restore mode. A total of 198 gravity disturbances spaced approximately 3 km apart were used, as well as 35 GPS/levelling points in the vicinity and on the Aswan Dam. No data on the Nasser Lake were available. This gave difficulties when using FFT, which requires the use of gridded data. When using exclusively the gravity disturbances, the agreement between the GPS/levelling data were 0.71 ± 0.17 m for FFT and 0.63 ± 0.15 for LSC. When combining gravity disturbances and GPS/levelling, the LSC error estimate was ±0.10 m. In the latter case two bias parameters had to be introduced to account for a possible levelling datum difference between the levelling on the dam and that on the adjacent roads. Received: 14 August 2000 / Accepted: 28 February 2001     

Modelling local GPS/levelling geoid undulations using artificial neural networks

The use of GPS for establishing height control in an area where levelling data are available can involve the so-called GPS/levelling technique. Modelling of the GPS/levelling geoid undulations has usually been carried out using polynomial surface fitting, least-squares collocation (LSC) and finite-element methods. Artificial neural networks (ANNs) have recently been used for many investigations, and proven to be effective in solving complex problems represented by noisy and missing data. In this study, a feed-forward ANN structure, learning the characteristics of the training data through the back-propagation algorithm, is employed to model the local GPS/levelling geoid surface. The GPS/levelling geoid undulations for Istanbul, Turkey, were estimated from GPS and precise levelling measurements obtained during a field study in the period 1998–99. The results are compared to those produced by two well-known conventional methods, namely polynomial fitting and LSC, in terms of root mean square error (RMSE) that ranged from 3.97 to 5.73 cm. The results show that ANNs can produce results that are comparable to polynomial fitting and LSC. The main advantage of the ANN-based surfaces seems to be the low deviations from the GPS/levelling data surface, which is particularly important for distorted levelling networks.     

无锡市厘米级似大地水准面的研究

利用大地水准面逼近的严密理论M olodenskii级数解和重力归算的地形均衡理论,结合全球定位系统(G PS)、水准和重力资料在无锡确定了精度达厘米级的似大地水准面,并讨论了无锡G PS控制网的布设及数据处理。通过检核,所确定的2.5'×2.5'似大地水准面精度为2.2cm。     

GPS水准及其在测绘工程中的应用

随着似大地水准面的不断精化,GPS水准有可能代替繁重的几何水准工作,介绍了似大地水准面的确定方法,并基于我国新一代似大地水准面CQG2000,在高山区GPS高程拟合的正常高中误差达到±0.21m。结合GPS实际工程分析,GPS高程拟合精度在平原地区可达到像控点高程精度要求。