Upper-mantle flow beneath French Polynesia from shear wave splitting

Upper-mantle flow beneath the South Pacific is investigated by analysing shear wave splitting parameters at eight permanent long-period and broad-band seismic stations and 10 broad-band stations deployed in French Polynesia from 2001 to 2005 in the framework of the Polynesian Lithosphere and Upper Mantle Experiment (PLUME). Despite the small number of events and the rather poor backazimuthal coverage due to the geographical distribution of the natural seismicity, upper-mantle seismic anisotropy has been detected at all stations except at Tahiti where two permanent stations with 15 yr of data show an apparent isotropy. The median value of fast polarization azimuths (N67.5°W) is parallel to the present Pacific absolute plate motion direction in French Polynesia (APM: N67°W). This suggests that the observed SKS fast polarization directions result mainly from olivine crystal preferred orientations produced by deformation in the sublithospheric mantle due to viscous entrainment by the moving Pacific Plate and preserved in the lithosphere as the plate cools. However, analysis of individual measurements highlights variations of splitting parameters with event backazimuth that imply an actual upper-mantle structure more complex than a single anisotropic layer with horizontal fast axis. A forward approach shows that a two-layer structure of anisotropy beneath French Polynesia better explains the splitting observations than a single anisotropic layer. Second-order variations in the measurements may also indicate the presence of small-scale lateral heterogeneities. The influence of plumes or fracture zones within the studied area does not appear to dominate the large-scale anisotropy pattern but may explain these second-order splitting variations across the network.     

A three-dimensional radially anisotropic model of shear velocity in the whole mantle

We present a 3-D radially anisotropic S velocity model of the whole mantle (SAW642AN), obtained using a large three component surface and body waveform data set and an iterative inversion for structure and source parameters based on Non-linear Asymptotic Coupling Theory (NACT). The model is parametrized in level 4 spherical splines, which have a spacing of ∼ 8°. The model shows a link between mantle flow and anisotropy in a variety of depth ranges. In the uppermost mantle, we confirm observations of regions with   V_SH > V_SV   starting at ∼80 km under oceanic regions and ∼200 km under stable continental lithosphere, suggesting horizontal flow beneath the lithosphere. We also observe a   V_SV > V_SH   signature at ∼150–300 km depth beneath major ridge systems with amplitude correlated with spreading rate for fast-spreading segments. In the transition zone (400–700 km depth), regions of subducted slab material are associated with   V_SV > V_SH   , while the ridge signal decreases. While the mid-mantle has lower amplitude anisotropy (<1 per cent), we also confirm the observation of radially symmetric   V_SH > V_SV   in the lowermost 300 km, which appears to be a robust conclusion, despite an error in our previous paper which has been corrected here. The 3-D deviations from this signature are associated with the large-scale low-velocity superplumes under the central Pacific and Africa, suggesting that   V_SH > V_SV   is generated in the predominant horizontal flow of a mechanical boundary layer, with a change in signature related to transition to upwelling at the superplumes.     

Distribution of seismic anisotropy in the subduction zone beneath the Wellington region, New Zealand

Shear wave splitting measurements from S arrivals of local earthquakes recorded at the Incorporated Research Institutions for Seismology (IRIS) broadband sensor SNZO are used to determine a basic anisotropic structure for the subduction zone in the Wellington region. With the use of high-frequency filters, fast anisotropic polarization ( φ ) and splitting time ( δt ) measurements typical of crustal anisotropy are evident, but the larger splitting expected from the mantle is often not resolved. The small splitting seen agrees well with the results of previous studies concerning shallow crustal anisotropy. With the use of lower-frequency filters, measurements more consistent with mantle anisotropy are made. Anisotropy of 4.4 ± 0.9 per cent with a fast polarization of 29° ± 38° is calculated for the subducting slab, from 20 to 70  km depth. Using this result in addition to the results of previous studies, a model is proposed. The model requires a frequency-dependent anisotropy of less than 1.4 per cent when measured with a period of ~2  s to be present in the sub-slab mantle.
Separate from this population, a band of events in northern Cook Strait with an 86° ± 10° fast polarization is seen. This is at about 40° from the strike of the Hikurangi margin, and suggests a source of shear strain 40° removed from that found in the majority of the region. The cause of this is probably a deformation in the subducting slab in this region, as it moves towards a greater incline to the south.     

Correlation between seismic anisotropy and Bouguer gravity anomalies in Tibet and its implications for lithospheric structures

As a baseline measurement for understanding the Himalayan–Tibetan orogen, a product of continent–continent collision between India and Eurasia, we analyse digital seismic data in order to constrain the seismic anisotropy of the Indian shield. Based on spatially sparse data that are currently available in the public domain, there is little shear-wave birefringence for SKS phases under the Indian shield, even though it is part of a fast-moving plate in the hotspot frame of reference. If most of the northern Indian mantle has little transverse anisotropy, the onset of significant anisotropy under Tibet marks the northern terminus of intact Indian lithosphere that is thrusting under the Himalayan–Tibetan orogen. Beyond this terminus, tectonic fabric such as that associated with the deforming lithospheric mantle of Eurasia must be present in the upper mantle. Along the profile from Yadong to Golmud, the only profile in Tibet where a number of shear-wave birefringence data are available, the amount of birefringence shows two marked increases, near 30° and 33°N, between which a local high in Bouguer gravity anomaly is observed. Such a correlation between patterns of shear-wave birefringence and gravity anomalies is explained by the juxtaposition of Indian lithosphere against the overlying Eurasian lithosphere: while the Eurasian lithospheric mantle appears only to the north of 30°N, the Indian lithospheric mantle extends northwards to near 33°N.     

Experimental study of shear-waves from shots in anisotropic media

Summary. A complex array of vertical-seismic-profiles and reflection surveys in the Taman Peninsula, Krasnodar, using geophones with inclined axes, is used to investigate shear-wave splitting in thick Maikopian clays characterised by pronounced diapirism. The shear waves split into SH (faster) and SV (slower) components and display transverse isotropy with a vertical axis of symmetry with a maximum shear-wave delay of up to 0.5 s . Within the accuracy of the observations there is no azimuthal anisotropy.     

Three-dimensional image of the anisotropic bodies beneath central Honshu, Japan

Shear-wave splitting from local deep earthquakes is investigated to clarify the volume and the location of two anisotropic bodies in the mantle wedge beneath central Honshu, Japan. We observe a spatial variation in splitting parameters depending on the combination of sources and receivers, nearly N–S fast in the northern region, nearly E–W fast in the southern region and small time delays in the eastern region. Using forward modelling, two models with 30 and 10 per cent anisotropy are tested by means of a global search for the locations of anisotropic bodies with various volumes. The optimum model is obtained for 30 per cent anisotropy, which means a 5 per cent velocity difference between fast and slow polarized waves. The northern anisotropic body has a volume of 1.00° (longitude) × 0.5° (latitude) × 75 km (depth), with the orientation of the symmetry axis being N20°E. The southern anisotropic body has a volume of 1.25° × 1.25° × 100 km with the symmetry axis along N95°E. Our results show that the anisotropic bodies are located in low-velocity and low- Q regions of the mantle. This, together with petrological data and the location of volcanoes in the arc, suggests that the possible cause of the anisotropy is the preferred alignment of cracks filled with melt.     

A lower mantle S-wave triplication and the shear velocity structure of D"

Summary. A lower mantle S-wave triplication detected with short- and long-period WWSSN and CSN recordings indicates a substantial shear velocity discontinuity near 280 km above the core–mantle boundary. The triplication can be observed in rotated SH seismograms from intermediate and deep focus events throughout the distance range from 70° to 95°. Three distinct source region–receiver array combinations that have been investigated in detail demonstrate consistent travel time and relative amplitude behaviour of the triplication, with slight systematic shifts in the triplication indicating up to 40 km variations in the depth of the discontinuity. Modelling of the observations with synthetic seismograms produced with the Cagniard de Hoop and reflectivity methods constrains the shear velocity increase to be 235 ± 0.25 per cent, comparable to upper mantle discontinuities. Short-period observations indicate that the velocity increase may be a sharp first-order discontinuity, or may extend over a transition zone no more than 50 km thick. The shear velocity gradient below the discontinuity, within the D" layer, is not well-constrained by the SH data, but slightly positive or near zero velocity gradients are consistent with the long-period amplitude ratios of ScSH/SH .     

A Maastrichtian palaeomagnetic pole for the Pacific plate from a skewness analysis of marine magnetic anomaly 32

The asymmetry (skewness) of marine magnetic anomaly 32 (72.1–73.3  Ma) on the Pacific plate has been analysed in order to estimate a new palaeomagnetic pole. Apparent effective remanent inclinations of the seafloor magnetization were calculated from skewness estimates of 108 crossings of anomaly 32 distributed over the entire Pacific plate and spanning a great-circle distance of ~12  000  km. The data were inverted to obtain a palaeomagnetic pole at 72.1°N, 26.8°E with a 95 per cent confidence ellipse having a 4.0° major semi-axis oriented 98° clockwise of north and a 1.8° minor semi-axis; the anomalous skewness is 14.2° ± 3.7°. The possible dependence of anomalous skewness on spreading rate was investigated with two empirical models and found to have a negligible effect on our palaeopole analysis over the range of relevant spreading half-rates, ~25 to ~90  mm  yr⁻¹ . The new pole is consistent with the northward motion for the Pacific plate indicated by coeval palaeocolatitude and palaeoequatorial data, but differs significantly from, and lies to the northeast of, coeval seamount poles. We attribute the difference to unmodelled errors in the seamount poles, mainly in the declinations. Comparison with the northward motion inferred from dated volcanoes along the Hawaiian–Emperor seamount chain indicates 13° of southward motion of the Hawaiian hotspot since 73  Ma. When the pole is reconstructed with the Pacific plate relative to the Pacific hotspots, it differs by 14°–18° from the position of the pole relative to the Indo–Atlantic hotspots. This has several possible explanations including bias in one or more of the palaeomagnetic poles, motion between the Pacific and Indo–Atlantic hotspots, and errors in plate reconstructions relative to the hotspots.     

Signature of remnant slabs in the North Pacific from P-wave tomography

A 3-D ray-tracing technique was used in a global tomographic inversion in order to obtain tomographic images of the North Pacific. The data reported by the Geophysical Survey of Russia (1955–1997) were used together with the catalogues of the International Seismological Center (1964–1991) and the US Geological Survey National Earthquake Information Center (1991–1998), and the recompiled catalogue was reprocessed. The final data set, used for following the inversion, contained 523 430 summary ray paths. The whole of the Earth's mantle was parametrized by cells of 2° × 2° and 19 layers. The large and sparse system of observation equations was solved using an iterative LSQR algorithm.
A subhorizontal high-velocity anomaly is revealed just above the 660 km discontinuity beneath the Aleutian subduction zone. This high-velocity feature is observed at latitudes of up to ~70°N and is interpreted as a remnant of the subducted Kula plate, which disappeared through ridge subduction at about 48 Ma. A further positive velocity perturbation feature can be identified beneath the Chukotka peninsula and Okhotsk Sea, extending from ~300 to ~660 km depth and then either extending further down to ~800 km (Chukotka) or deflecting along the 660 km discontinuity (Okhotsk Sea). This high-velocity anomaly is interpreted as a remnant slab of the Okhotsk plate accreted to Siberia at ~55 Ma.     

Pn anisotropy studies in northern Britain and the eastern and western United States

Summary. Available seismic refraction data from three different continental areas, northern Britain and the eastern and western United States, has been studied for possible P_n , velocity anisotropy using the methods described by Bamford. There are various deficiencies in the time—distance data used in each case but, while the uppermost mantle beneath northern Britain and the eastern United States seems to be isotropic within the limits of measurement error, there is a small but significant anisotropy beneath the western United States.
Both the amount (up to 3 per cent) and the direction (70–80° east of north) of this anisotropy are very similar to the results obtained in the Pacific Ocean off California. We tentatively conclude that this anisotropy is present as a consequence of the subduction of oceanic lithosphere beneath the western United States.     

Anisotropy of heterogeneity scale lengths in the lower mantle from PKIKP precursors

The anisotropy of heterogeneity scale lengths in the lower mantle is investigated by modelling its effect on the high-frequency precursors of PKIKP scattered by the heterogeneities. Although models having either an isotropic or an anisotropic distribution of scale lengths can fit the observed coda shapes of short-period precursors, the frequency content of broad-band PKIKP precursors favours a dominantly isotropic distribution of scale lengths. Precursor coda shapes are consistent with 1 per cent fluctuations in P velocity in the wavenumber band 0.05–0.5  km⁻¹ extending to 1000  km above the core–mantle boundary, and with a D" region open to circulation throughout the lower mantle. The level of excitation of PKIKP precursors observed in the frequency band 0.02–2  Hz requires a power spectrum of heterogeneity that is nearly white or slowly increasing with wavenumber. Anisotropy of scale lengths may exist in a D" layer having larger horizontal than vertical scale lengths and produce little or no detectable effects on PKIKP precursors for P -velocity perturbations as high as 3 per cent when averaged over a vertical scale of several kilometres, and much higher when averaged over scales of hundreds of metres or less.     

New seismological constraints on differential rotation of the inner core from Novaya Zemlya events recorded at DRV, Antarctica

Novaya Zemlya nuclear test records at the seismic station DRV, Antarctica, are analysed in order to obtain further constraints on a possible differential rotation of the inner core with respect to the mantle. These data allow the sampling of the inner core along a nearly polar path in very stable conditions over more than two decades, from 1966 to 1990. The PKP (BC)– PKP (DF) traveltime residuals, which reflect the inner-core anisotropy and/or heterogeneities sampled along the path, exhibit a great stability through time. A computation of the residuals that are expected for various differential rotation rates and the same rotation axis as the mantle has been performed using the worldwide residual catalogue of Engdahl et al . (1997) for summary rays that include the time as an additional parameter in data stacking. Comparison of data and predictions shows that an eastward differential rotation with a rate as large as 3°  yr⁻¹, as suggested by some authors, is not possible, but an eastward rotation at 1°  yr⁻¹ or lower cannot be rejected.     

Seismic body waves in anisotropic media: reflection and refraction at a plane interface

Summary. A formulation is derived for calculating the energy division among waves generated by plane waves incident on a boundary between generally anisotropic media. A comprehensive account is presented for P, SV and SH waves incident from an isotropic half-space on an orthorhombic olivine half-space, where the interface is parallel to a plane of elastic symmetry. For comparison, a less anisotropic medium having transverse isotropy with a horizontal axis of symmetry is also considered. The particle motion polarizations of waves in anisotropic medium differ greatly from the polarizations in isotropic media, and are an important diagnostic of the presence of anisotropy. Incident P and SV waves generate quasi- SH waves, and incident SH waves generate quasi- P and quasi- SV waves, often of considerable relative magnitude. The direction of energy transport diverges from the propagation direction.     

Finite-frequency sensitivity of body waves to anisotropy based upon adjoint methods

We investigate the sensitivity of finite-frequency body-wave observables to mantle anisotropy based upon kernels calculated by combining adjoint methods and spectral-element modelling of seismic wave propagation. Anisotropy is described by 21 density-normalized elastic parameters naturally involved in asymptotic wave propagation in weakly anisotropic media. In a 1-D reference model, body-wave sensitivity to anisotropy is characterized by 'banana–doughnut' kernels which exhibit large, path-dependent variations and even sign changes. P -wave traveltimes appear much more sensitive to certain azimuthally anisotropic parameters than to the usual isotropic parameters, suggesting that isotropic P -wave tomography could be significantly biased by coherent anisotropic structures, such as slabs. Because of shear-wave splitting, the common cross-correlation traveltime anomaly is not an appropriate observable for S waves propagating in anisotropic media. We propose two new observables for shear waves. The first observable is a generalized cross-correlation traveltime anomaly, and the second a generalized 'splitting intensity'. Like P waves, S waves analysed based upon these observables are generally sensitive to a large number of the 21 anisotropic parameters and show significant path-dependent variations. The specific path-geometry of SKS waves results in favourable properties for imaging based upon the splitting intensity, because it is sensitive to a smaller number of anisotropic parameters, and the region which is sampled is mainly limited to the upper mantle beneath the receiver.     

Localized velocity anomalies in the lower mantle

Summary. Two localized regions of velocity heterogeneity in the lower mantle with scale lengths of 1000–2000 km and 2 per cent velocity contrasts are detected and isolated through comparison of S, ScS, P and PcP travel times and amplitudes from deep earthquakes in Peru, Bolivia, Argentina and the Sea of Okhotsk. Comparison of the relative patterns of ScS-S differential travel times and S travel-time residuals across North American WWSSN and CSN stations for the different source regions provides baselines for interpreting which phases have anomalous times. A region of low S and P velocities is located beneath Northern Brazil and Venezuela at depths of 1700–2700 km. This region produces S -wave delays of up to 4 s for signals from deep Argentine events recorded at eastern North American stations. The localized nature of the anomaly is indicated by the narrow bounds in azimuth (15°) and take-off angle (13°) of the arrivals affected by it. The long period S -waves encountering this anomaly generally show 30–100 per cent amplitude enhancement, while the short-period amplitudes show no obvious effect. The second anomaly is a high-velocity region beneath the Caribbean originally detected by Jordan and Lynn, who used travel times from deep Peruvian events. The data from Argentine and Bolivian events presented here constrain the location of the anomaly quite well, and indicate a possible short- and long-period S -wave amplitude diminution associated with it. When the travel-time data are corrected for the estimated effects of these two anomalies, a systematic regional variation in ScS-S station residuals is apparent between stations east of and west of the Rocky Mountains. One possible explanation of this is a long wavelength lateral variation in the shear velocity structure of the lower mantle at depths greater than 2000 km beneath North America.     

On the inversion of Love- and Rayleigh-wave dispersion and implications for Earth structure and anisotropy

Summary. Various factors can make it difficult to explain observations of Love- and Rayleigh-wave dispersion with the same relatively simple isotropic model. These factors include systematic errors which might occur in determinations of observed group and phase velocities, lateral variations in structure along the path of travel, and the attempt to explain observations with a model comprised of only a small number of thick layers. The last of these factors is illustrated by an inversion of dispersion data in the central United States where shear-wave anisotropy had previously been invoked as one way to explain incompatible Love- and Rayleigh-wave velocities. It is shown that the data can be satisfied equally well by an isotropic model consisting of several thin layers.
In cases where the incompatibility of Love- and Rayleigh-wave data might be produced by intrinsic anisotropy, it is necessary to invert those data using an anisotropic theory rather than by separate isotropic inversions of Love and Rayleigh waves. Inversions of fundamental-mode data for a region of the Pacific, assuming anisotropic media in which the layers are transversely isotropic with a vertical axis of symmetry, lead to models which are highly non-unique. Even if the inversions solve only for shear velocities in the litho-sphere and asthenosphere it is not possible, without supplementary information, to ascertain the depth interval over which anisotropy occurs or to determine the thickness of the lithosphere or asthenosphere with much precision.     

Multiphase cooling and exhumation of the southern Adelaide Fold Belt: constraints from apatite fission track data

Data from apatite fission track analysis are presented for 20 outcrop samples collected in the southern Adelaide Fold Belt, South Australia. Interpretation of these data, with the aid of numerical models which allow inference of multiphase cooling histories, indicate three discrete cooling events that are likely to correlate with sedimentation events in surrounding depositional settings. An event beginning some time after 85 Ma (Late Cretaceous) was characterized by cooling throughout the study area from temperatures of roughly 50 to 70 °C. An event beginning at 300–270 Ma (Late Palaeozoic) was characterized by cooling from temperatures >120 °C in all areas except for the Mount Lofty Ranges and Murray Bridge region, where peak temperatures were only 95–115 °C prior to Palaeozoic cooling. Some samples from these subregions of relatively cool Late Palaeozoic temperatures also retain evidence for even earlier cooling from temperatures >120 °C, beginning prior to 350 Ma. We interpret the post 85-Ma event as the consequence of regional exhumation from a depth of 1.0–1.6 km. The Late Palaeozoic event (300–270 Ma) is interpreted as cooling associated with the termination of the Alice Springs Orogeny, while cooling prior to 350 Ma probably represents the final stages of Early Middle Palaeozoic unroofing of the southern Adelaide Fold Belt.
The results highlight the importance of regional, episodic postorogenic exhumation of Palaeozoic fold belts, where – in some cases – conventional methods have erroneously suggested relatively long-term stability.     

Global anisotropic phase velocity maps for higher mode Love and Rayleigh waves

It is well established that the Earth's uppermost mantle is anisotropic, but there are no clear observations of anisotropy in the deeper parts of the mantle. Surface waves are well suited to observe anisotropy since they carry information about both radial and azimuthal anisotropy. Fundamental mode surface waves, for commonly used periods up to 200 s, are sensitive to structure in the first few hundred kilometres, and therefore, do not provide information on anisotropy below. Higher mode surface waves have sensitivities that extend to and beyond the transition zone, and should thus give insight about azimuthal anisotropy at greater depths. We have measured higher mode Love and Rayleigh phase velocities using a model space search approach, which provides us with consistent relative uncertainties from measurement to measurement and from mode to mode. From these phase velocity measurements, we constructed global anisotropic phase velocity maps. Prior to inversion, we determine the optimum relative weighting for anisotropy. We present global azimuthal phase velocity maps for higher mode Rayleigh waves (up to the sixth higher mode) and Love waves (up to the fifth higher mode) with corresponding average model uncertainties. The anisotropy we derive is robust within the uncertainties for all modes. Given the ray theoretical sensitivity kernels of Rayleigh and Love wave modes, the source of anisotropy is complex, but mainly located in the asthenosphere and deeper. Our models show a good correspondence with other studies for the fundamental mode, but we have been able to achieve higher resolution.     

Upper-mantle structure of the Baltic Shield below the Swedish National Seismological Network (SNSN) resolved by teleseismic tomography

Upper-mantle structure under the Baltic Shield is studied using non-linear high resolution teleseismic P -phase tomography. Observed relative arrival-time residuals from 52 teleseismic earthquakes recorded by the Swedish National Seismological Network (SNSN) are inverted to delineate the structure of the upper mantle. The network consists of 47 (currently working) three-component broad-band stations located in an area about 450 km wide and 1450 km long. In order to reduce complications due to possible significant three-dimensionality of Earth structure, events chosen for this study lay close to in-line with the long-axis of the array  (±30°)  . Results indicate P -wave velocity perturbations of ±3 per cent down to at least 470 km below the network. The size of the array allows inversion for structures even at greater depths, and lateral variations of velocity at depths of up to 680 km appear to be resolved. Below the central part of the array (60°–64° N), where ray coverage is best, the data reveals a large region of relatively low velocity at depths of over about 300 km. At depths less than about 250–300 km, the models include a number of features, including an apparent slab-like structure dipping gently towards the north.     

Inversion of P-wave velocity anisotropy

Summary. We examine the way in which measurements of velocity anisotropy can add to our understanding of upper mantle structure. Measurements of P -wave velocity anisotropy in a single plane contain very little direct information about the anisotropic structure. A promising technique is to fit the observed velocity variation with a mixture of an assumed anisotropic constituent and a proportion of isotropic material. Using this technique, mixtures of orthorhombic and transversely isotropic olivine are obtained, which are in excellent agreement with observed velocity variations in the Pacific.