How was Taiwan created?

Since the beginning of formation of proto-Taiwan during late Miocene (9 Ma), the subducting Philippine (PH) Sea plate moved continuously through time in the N307° direction at a 5.6 cm/year velocity with respect to Eurasia (EU), tearing the Eurasian plate. Strain states within the EU crust are different on each side of the western PH Sea plate boundary (extensional in the Okinawa Trough and northeastern Taiwan versus contractional for the rest of Taiwan Island). The B feature corresponds to the boundary between the continental and oceanic parts of the subducting Eurasian plate and lies in the prolongation of the ocean–continent boundary of the northern South China Sea. Strain rates in the Philippines to northern Taiwan accretionary prism are similar on each side of B (contractional), though with different strain directions, perhaps in relation with the change of nature of the EU slab across B. Consequently, in the process of Taiwan mountain building, the deformation style was probably not changing continuously from the Manila to the Ryukyu subduction zones. The Luzon intra-oceanic arc only formed south of B, above the subducting Eurasian oceanic lithosphere. North of B, the Luzon arc collided with EU simultaneously with the eastward subduction of a portion of EU continental lithosphere beneath the Luzon arc. In its northern portion, the lower part of the Luzon arc was subducting beneath Eurasia while the upper part accreted against the Ryukyu forearc. Among the consequences of such a simple geodynamic model: (i) The notion of continuum from subduction to collision might be questioned. (ii) Traces of the Miocene volcanic arc were never found in the southwestern Ryukyu arc. We suggest that the portion of EU continental lithosphere, which has subducted beneath the Coastal Range, might include the Miocene Ryukyu arc volcanoes formed west of 126°E longitude and which are missing today. (iii) The 150-km-wide oceanic domain located south of B between the Luzon arc and the Manila trench, above the subducting oceanic EU plate (South China Sea) was progressively incorporated into the EU plate north of B.     

西太平洋边缘构造特征及其演化

西太平洋边缘构造带是地球上规模最大最复杂的板块边界,以台湾和马鲁古海为界,自北往南大致可以分为3段。北段是典型的沟-弧-盆体系,千岛海盆、日本海盆及冲绳海槽均为典型的弧后扩张盆地。中段菲律宾岛弧构造带为双向俯冲带,构造复杂,新生代经历大的位移和重组,使得欧亚大陆边缘的南海、苏禄海和苏拉威西海成因存在很大的争议。南段新几内亚—所罗门构造带是太平洋板块、印度—澳大利亚及欧亚板块共同作用的结果,既有不同阶段的俯冲、碰撞,也有大规模的走滑与弧后的扩张,其间既有新扩张的海盆,又有正在俯冲消亡的海盆。台湾岛处于枢纽部位,欧亚板块在此被撕裂,南部欧亚大陆边缘南海洋壳沿马尼拉海沟俯冲于菲律宾岛弧之下,而北部菲律宾海洋壳沿琉球海沟俯冲欧亚大陆之下。马鲁古海是西太平洋板块边界又一转折点,马鲁古海板块往东下插于哈马黑拉之下,往西下插于桑义赫弧,形成反U形双向俯冲汇聚带,其洋壳板块已基本全部消失,致使哈马黑拉弧与桑义赫弧形成弧-弧碰撞。     

台湾-吕宋岛双火山弧的构造意义

扼要评介了国内外关于台湾-吕宋岛双火山弧在南海沿马尼拉海沟俯冲的动力学过程和俯冲板块深部形态等方面研究的成果;认为目前的动力学模式还不够完善,没有能够对台湾-吕宋岛双火山弧中存在的第四纪火山间断做出合理的解释,为此引入“板片窗”概念,对已经提出的动力学模式进行了修改;并统计1964~2006年发生于菲律宾地区的地震震中位置,认为存在于菲律宾群岛17°~19°N之间的深源地震稀疏带和存在于14°~15°N之间的喇叭状地震稀疏带是地震作用对于南海板片窗构造存在的反映;结合研究区域已有应力场研究资料,认为俯冲的南海亚板块中板片窗两侧俯冲倾角的差异,应该是造成俯冲带内应力分布出现分带现象的原因之一。     

East Asia plate tectonics since 15 Ma: constraints from the Taiwan region

15 Ma ago, a major plate reorganization occurred in East Asia. Seafloor spreading ceased in the South China Sea, Japan Sea, Taiwan Sea, Sulu Sea, and Shikoku and Parece Vela basins. Simultaneously, shear motions also ceased along the Taiwan–Sinzi zone, the Gagua ridge and the Luzon–Ryukyu transform plate boundary. The complex system of thirteen plates suddenly evolved in a simple three-plate system (EU, PH and PA). Beneath the Manila accretionary prism and in the Huatung basin, we have determined magnetic lineation patterns as well as spreading rates deduced from the identification of magnetic lineations. These two patterns are rotated by 15°. They were formed by seafloor spreading before 15 Ma and belonged to the same ocean named the Taiwan Sea. Half-spreading rate in the Taiwan Sea was 2 cm/year from chron 23 to 20 (51 to 43 Ma) and 1 cm/year from chron 20 (43 Ma) to 5b (15 Ma). Five-plate kinematic reconstructions spanning from 15 Ma to Present show implications concerning the geodynamic evolution of East Asia. Amongst them, the 1000-km-long linear Gagua ridge was a major plate boundary which accommodated the northwestward shear motion of the PH Sea plate; the formation of Taiwan was driven by two simple lithospheric motions: (i) the subduction of the PH Sea plate beneath Eurasia with a relative westward motion of the western end (A) of the Ryukyu subduction zone; (ii) the subduction of Eurasia beneath the Philippine Sea plate with a relative southwestward motion of the northern end (B) of the Manila subduction zone. The Luzon arc only formed south of B. The collision of the Luzon arc with Eurasia occurred between A and B. East of A, the Luzon arc probably accreted against the Ryukyu forearc.     

A synthesis of the geologic evolution of Taiwan

The island arc of Taiwan is composed of Cenozoic geosynclinal sediments more than 10,000 m thick, lying on a pre-Tertiary metamorphic basement. Pleistocene to Miocene andesitic islands surround the main island and are related mostly to arc magmatism. The Penghu Island Group in the Taiwan Strait is covered with Pleistocene flood basalt. Neogene shallow marine clastic sediments are exposed mainly in the western foothills with Pleistocene andesitic extrusives at the northern tip and the northeastern offshore islands. A thick sequence of Paleogene to Miocene argillitic to slaty metaclastic rocks underlies the western Central Range and forms the immediate sedimentary cover on the pre-Tertiary metamorphic complex to the east, which represents an older Mesozoic arc-trench system. The Coastal Range in eastern Taiwan is a Neogene andesitic magmatic arc, including also a large variety of volcaniclastic and turbiditic sediments. Cenozoic Taiwan is the site of arc-continent collision where the Luzon arc on the Philippine Sea plate overrides the Chinese continental margin on the Eurasian plate. East and northeast of Taiwan, the polarity of subduction changes whereby the oceanic Philippine Sea plate is subducting beneath the Ryukyu arc system on the Eurasian plate. Continent-arc collision in Taiwan island is anomalous and may occur in a broad belt of deformation rather than along a well-defined plate boundary or subduction zone.     

Is northern Honshu a microplate?

Seismic slip vectors along the Japan Trench, the eastern margin of the Japan Sea and the Sagami Trough are compared with global relative plate motions (RM2, Minster and Jordan, 1978) to test a new hypothesis that northern Honshu, Japan, is part of the North American plate. This hypothesis also claims that the eastern margin of the Japan Sea is a nascent convergent plate boundary (Kobayashi, 1983; Nakamura, 1983).Seismic slip vectors along the Japan Trench are more parallel to the direction of the Pacific-North American relative motion than that of the Pacific-Eurasian relative motion. However, the difference in calculated relative motions is too small avoid to the possibility that a systematic bias in seismic slip vectors due to anomalous velocity structure beneath island arcs causes this apparent coincidence. Seismic slip vectors and rates of shortening along the eastern margin of the Japan Sea for the past 400 years are also consistent with the relative motion between the North American and Eurasian plates calculated there. Seismic slip vectors and horizontal crustal strain patterns revealed by geodetic surveys in south Kanto, beneath which the Philippine Sea plate is subducting, indicate two major directions; one is the relative motion between the North American and Philippine Sea plates, and the other that between the Eurasian and Philippine Sea plates.One possible interpretation of this is that the eastern margin of the Japan Sea may be in an embryonic stage of plate convergence and the jump of the North American-Eurasian plate boundary from Sakhalin-central Hokkaido to the eastern margin of the Japan Sea has not yet been accomplished. In this case northern Honshu is a microplate which does not have a driving force itself and its motion is affected by the surrounding major plates, behaving as part of either the Eurasian or North American plate. Another possibility is that the seismic slip vectors and crustal deformations in south Kanto do not correctly represent the relative motion between plates but represent the stresses due to non-rigid behaviors of part of northern Honshu.     

Configuration of subducting Philippine Sea plate and crustal structure in the central Japan region

A seismic experiment with six explosive sources and 391 seismic stations was conducted in August 2001 in the central Japan region. The crustal velocity structure for the central part of Japan and configuration of the subducting Philippine Sea plate were revealed. A large lateral variation of the thickness of the sedimentary layer was observed, and the P-wave velocity values below the sedimentary layer obtained were 5.3–5.8 km/s. P-wave velocity values for the lower part of upper crust and lower crust were estimated to be 6.0–6.4 and 6.6–6.8 km/s, respectively. The reflected wave from the upper boundary of the subducting Philippine Sea plate was observed on the record sections of several shots. The configuration of the subducting Philippine Sea slab was revealed for depths of 20–35 km. The dip angle of the Philippine Sea plate was estimated to be 26° for a depth range of about 20–26 km. Below this depth, the upper boundary of the subducting Philippine Sea plate is distorted over a depth range of 26–33 km. A large variation of the reflected-wave amplitude with depth along the subducting plate was observed. At a depth of about 20–26 km, the amplitude of the reflected wave is not large, and is explained by the reflected wave at the upper boundary of the subducting oceanic crust. However, the reflected wave from reflection points deeper than 26 km showed a large amplitude that cannot be explained by several reliable velocity models. Some unique seismic structures have to be considered to explain the observed data. Such unique structures will provide important information to know the mechanism of inter-plate earthquakes.     

Seismic velocity discontinuities in the crust and uppermost mantle beneath the Kanto district, central Japan, identified from receiver function imaging and repeating earthquake activity

We constructed vertical cross-sections of depth-converted receiver function images to estimate the seismic velocity structure of the crust and uppermost mantle beneath the Kanto district, central Japan. Repeating earthquake data for the plate boundary were also used to estimate geometries of the subducting Philippine Sea plate and the subducting Pacific plate. As a result, we present images of some major seismic discontinuities. The upper boundary of the Pacific plate dips to the northwest in northern Kanto and to the west–southwest in southern Kanto with some undulations. On the other hand, the upper boundary of the Philippine Sea plate as a whole dips to the northwest. However, it is concave to the northeast in the southern Boso peninsula. We suggest that the low-velocity mantle wedge may be indicated on the top of both subducting plates. Plate thickness gradually decreases to the northeast. The northeastern end of the Philippine Sea plate is interpreted to be at depths of 45–90 km. The Moho discontinuity in the overriding plate is deeper than 25 km in the northern Kanto. It contacts the subducting Philippine Sea plate in the southwestern part near 35.8°N.     

DISCUSSIONS ON STRUCTURAL COUPLING

The structural coupling is a common geological phenomenon. The structural differences between eastern and western active continental margins of modern Pacific and between paleo-Pacific and modern-Pacific continental margins are related to the characteristics and status of the subducting oceanic plate, namely, 1. subducting angle; 2. change in subducting angle; 3. subducting velocity; 4. change in subducting velocity; 5. subduction depth; 6. horizontal distance between the leading edge of the subducting plate and the trench; 7. the structural form of the subducting plate at the 670kin boundary between the upper and lower mantle; 8. the displacement and the direction of displacement of subducting plate. The control and influence toward the shallow-level structures by the deep-level structural activities is a detailed representation of the structural coupling on active continental margin. The basin-maintain coupling phenomenon is an intracontinental structural coupling. The far field effect of collision be     

南海东北部及其邻近地区地壳上地幔P波速度结构

利用中国地震台网和ISC台站记录的P波到时数据,采用球坐标系有限差分地震层析成像方法反演了南海东北部及其邻近地区壳幔三维P波速度结构,并分析了不同地质单元的构造差异及其深部特征。结果表明:南海东北部表现出陆架地区的岩石层特性,属于华南大陆向海区的延伸,岩石层厚度较大,现今不存在大规模的地幔热流活动,推测大陆边缘张裂作用仅限于地壳内部而没有延伸进入上地幔,具有非火山型大陆边缘的深部特点。中央海盆附近上地幔P波速度明显降低,与海盆下方地幔热流活动密切相关。不同的速度异常特征表明:华南大陆暨台湾地区属于欧亚大陆的正常地壳或是与菲律宾海板块相互作用产生的增厚型地壳,冲绳海槽则是弧后扩张产生的减薄型地壳。滨海断裂带作为华南大陆高速异常和南海北部高速异常的分界,代表了一定地质时期华南地块和南海地块的拼合边界。断裂附近的上地幔低速异常揭示了闽粤沿海岩浆作用的深层动力机制。吕宋岛弧、马尼拉海沟、东吕宋海槽的速度异常与其所处的特殊构造位置有密切的关系,清晰地反映出岛弧俯冲带的地壳结构差异;台湾南部至吕宋岛弧的上地幔低速异常揭示了两个重要火山链的深部构造特征,北吕宋海脊下方100 km深度的条带状高速异常有可能代表了俯冲下沉的岩石层板片。     

Configuration of the subducting Philippine Sea slab in the eastern part of southwestern Japan with seismic array and Hi-net data

It is important to know the shape of a subducting slab in order to understand the mechanisms of inter-plate earthquakes and the process of subduction. Seismicity data and converted phases have been used to detect plate boundaries. The configuration of the Philippine Sea slab has been obtained at the western part of southwestern Japan. At the eastern part of southwestern Japan, however, the configuration of the Philippine Sea slab has not yet been confirmed. A spatially high-density seismic network makes it possible to detect the boundaries of the Philippine Sea slab. We used a spatially high-density temporal seismic array in the area. The configuration of the Philippine Sea plate is obtained at the eastern part of southwestern Japan using the temporal seismic array and permanent seismic network data and comparing the seismic structure obtained from the results of refraction surveys. The configuration of the Philippine Sea plate obtained by this study does not bend sharply compared to previous models obtained from receiver function analyses. We delineated the upper boundary of the slab to a depth of about 45 km. The weak image of the boundary, which corresponds to the upper mantle reflector beneath the source area of the 2000 Western Tottori earthquake, was detected using the spatially dense array.     

Tectonic evolution of the triple junction off central Honshu for the past 1 million years

We discuss several models of the evolution of the trench-trench-trench triple junction off central Honshu during the past 1 m.y. on the basis of plate kinematics, morphology, gravity and seismic reflection profile data available for the area. The study area is characterized by large basins, 7–8 km deep on the inner lower trench slope on the Philippine Sea side and the deep (9 km) Izu-Bonin Trench to the east. Between the basins and the trench, there are 6–7 km-deep basement highs. The triple junction is unstable due to the movement of the Philippine Sea plate at a velocity of 3 cm/yr in WNW direction with respect to Eurasia (Northeast Japan), subparallel to the strike of the Sagami Trough. Generally we can expect the boundary area between the Philippine Sea and Pacific plates to be extended because the Pacific plate is unlikely to follow the retreating Philippine Sea plate due to the obstruction of the southeastern corner of Eurasia. The above peculiar morphology of the junction area could have resulted from this lack of stability. However, there are several possible ways to explain the above morphology.

Our gravity model across the trench-basement high-basin area shows that the basement highs are made of low-density materials (1.8–2 g/cm³). Thus we reject the mantle diapir model which proposes that the basement highs have been formed by diapiric injection of serpentinites between the retreating Philippine Sea plate and the Pacific plate.

The stretched basin model proposes that the basins have been formed by stretching of the Philippine Sea plate wedge. We estimated the extension to be about 10 km at the largest basin. We reconstructed the morphology at 1 Ma by moving the Philippine Sea plate 20 km farther to the east after closing the basins, and thus obtained 8 km depth of the 1 Ma trench, which is similar to that of the present Japan Trench to the north. Although this stretched basin model can explain the formation of the basins and the deep trench, other models are equally possible. For instance, the eduction model explains the origin of the basin by the eduction of the Philippine Sea basement from beneath the basement high, while the accretion model explains the basement highs by the accretion of the Izu-Bonin trench wedge sediments. In both of these models we can reconstruct the 1 Ma trench depth as about 8 km, similar to that of the stretched basin model.

The deformation of the basement of the basins constitutes the best criterion to differentiate between these models. The multi-channel seismic reflection profiles show that the basement of the largest basin is cut by normal faults, in particular at its eastern edge. This suggests that the stretched basin model is most likely. However, the upper part of the sediments shows that the basement high to the east has been recently uplifted. This uplift is probably due to the recent (0.5 Ma) start of accretion of the trench wedge sediments beneath this basement high.     

论构造耦合作用

构造耦合作用是一种普遍存在的地质现象。现今东、西太平洋的构造差异及古太平洋和现今太平洋大陆边缘构造差异与俯冲的洋壳板块性状有关,即:①俯冲角度;②俯冲角度的改变;③俯冲速率;④俯冲速率的改变;⑤俯冲深度;⑥俯冲板块前缘与海沟间的水平距离;⑦俯冲板块在670km上、下地幔界线处的构造形态;⑧俯冲板块的位移及位移方向。这种深部构造活动对浅部构造形成的制约和影响,是活动大陆边缘构造耦合现象的具体表现。中国西北部的盆山耦合现象是大陆内部的构造耦合作用,印度板块与欧亚板块碰撞产生的远距离效应,导致中亚地区产生陆内A型俯冲,A型俯冲是造成盆地消亡、山系形成的重要因素。     

台湾岛以南海域新近纪的弧-陆碰撞造山作用

台湾岛以南海域(台南滨海)弧—陆碰撞带位于欧亚板块、菲律宾海板块和南海的结合部位,是新近纪弧—陆碰撞研究的理想场所。本文通过对南海973航次在该区域的多道地震剖面的解释,认为台南滨海弧—陆碰撞带增生的火山—沉积楔由恒春海脊和高屏斜坡两部分组成,前者是菲律宾海板块的增生楔,后者是欧亚板块的增生楔,在增生楔体和火山弧之间是作为弧前盆地的北吕宋海槽。自中新世中期以来,南海洋壳开始沿着马尼拉海沟向菲律宾海板块俯冲,形成活动大陆边缘的增生部分——恒春海脊;与此同时菲律宾海板块开始向北西方向移动,前缘的吕宋岛弧距今6.5Ma以来朝着亚洲陆缘斜向汇聚,形成了被动大陆边缘的增生部分——高屏斜坡。由于菲律宾海板块和欧亚板块之间的斜向汇聚,弧—陆碰撞具有穿时性,造山作用首先发生在台湾岛的北部,然后向南部及台南滨海发展。     

南海表层沉积物中细粒组分的稀土元素地球化学特征

对南海表层沉积物中的细粒组分进行电感耦合等离子体质谱法测试, 探讨南海稀土元素分布特征及其影响因素.结果表明, 南海表层沉积物中稀土元素分布主要与陆源物质输入、生物活动和火山物质补给密切相关.南海细粒组分的配分模式与中国黄土的接近, 与周边的珠江、湄公河等河流输入物质也有相似性, 而与南海碱性玄武岩存在显著差异, 表明南海沉积物主要来自于周边大陆.稀土元素趋势分析表明, 珠江口往外至海南岛南部海域中沉积物朝东南方向向陆坡输送; 台西南至珠江口往外海域沉积物大多向南输运; 吕宋岛西部海域包括黄岩岛附近海域的火山物质主要向西北方向输送, 向西可达113°E、向北可至20°N附近; 南海南部沉积物整体上向南沙海槽西北部附近海域输送.      

Indenter-tectonics in the Philippines: Example from the Palawan Microcontinental Block - Philippine Mobile Belt Collision

Abstract. The aseismic Palawan microcontinental block is an oceanic bathymetric high that has collided with the seismically-ac-tive Philippine Mobile Belt since the Early Miocene. Consequently, tectonic microblocks immediately north (Luzon) and south (Western Visayas Block) of the collision front rotated in opposite senses. The rotation led the microblocks to onramp adjacent strike-slip faults, and converted these to subduction zones, namely, the current Manila and Negros Trenches. In addition, the collision also initiated the southward propagation of a major left-lateral strike slip fault, the Philippine Fault Zone, and the Philippine Trench, which bounds the Philippine archipelago along its eastern boundary. Based on onshore and offshore data, the Philippine Fault Zone and the East Luzon Trough - Philippine Trench appears to also propagate northward. Furthermore, the opposite direction of propagation is also noted for the Manila and Negros Trenches from the locus of the collision in the Central Philippines to their northern and southern extensions, respectively. The ages of initiation of the Manila Trench (Early Miocene), Philippine Fault Zone (Middle Miocene) and Philippine Trench (Pliocene) as encountered along a west to east transect in the Central Philippines are consistent with the collision and subsequent indentation of Palawan with the rest of the Philippine Mobile Belt.     

Numerical modelling of the three-dimensional stress field in southwestern Japan

It has been inferred from the focal mechanism of earthquakes and their hypocenter distribution (Shiono, 1977) that the stress field in southwestern Japan indicates complicated features; a NW-SE compression at shallow depths along the Nankai trough, an E-W or ESE-WNW compression in the inland crust, an extension parallel to the leading edge of the Philippine Sea plate at subcrustal depths in the region from the southern Chubu to northwestern Shikoku, and a down-dip tension beneath the Kyushu island.In order to investigate possible sources of these complex features of the stress state, a three-dimensional finite element method is employed to model the configuration of the subducting Philippine Sea plate, taking into consideration the following three possible types of forces:

1. (1) A negative buoyancy due to the density contrast between the subducting plate and the surrounding mantle.

2. (2) A northwestward compressive force generated by the movement of the Philippine Sea plate.

3. (3) A westward compressive force due to the movement of the Pacific plate.

For various combinations of different magnitudes of these forces, and of different elastic moduli, the stresses at a number of selected sites are calculated, and their directions are compared with those inferred from the focal mechanism and other geophysical information.It is found that the observed extensional stresses parallel to the leading edge of the subducting Philippine Sea plate may be caused mainly by the negative buoyancy. The northwestward compressive force may not play an important role in generating the complex stress field in southwestern Japan. The observed E-W compressional stress field prevailing in the inland region appears to result mainly from the westward-moving Pacific plate. The present results suggest that if a thin low-velocity transitional layer exists just above the subducting Philippine Sea plate, it could give appreciable effects on the mechanism of low-angled thrust faulting off the Kii peninsula and the Shikoku island.The magnitude of the shear stress in the continental crust and in the subducting plate is estimated to be of the order of several hundred bars, although the calculated shear stresses are considerably affected by the configuration of the subducting plate and also by the applied forces.It is interesting that the stress distribution appears to have some relations to seismicity of subcrustal earthquakes, and to the rupture process of large thrust earthquakes along the plate boundary.     

The dynamics of big mantle wedge, magma factory, and metamorphic–metasomatic factory in subduction zones

The East Asian continental margin is underlain by stagnant slabs resulting from subduction of the Pacific plate from the east and the Philippine Sea plate from the south. We classify the upper mantle in this region into three major domains: (a) metasomatic–metamorphic factory (MMF), subduction zone magma factory (SZMF), and the ‘big mantle wedge’ (BMW). Whereas the convection pattern is anticlockwise in the MMF domain, it is predominantly clockwise in the SZMF and BMW, along a cross section from the south. Here we define the MMF as a small wedge corner which is driven by the subducting Pacific plate and dominated by H₂O-rich fluids derived by dehydration reactions, and enriched in large ion lithophile elements (LILE) which cause the metasomatism. The SZMF is a zone intermediate between MMF and BMW domains and constitutes the main region of continental crust production by partial melting through wedge counter-corner flow. Large hydrous plume generated at about 200 km depth causes extensive reduction in viscosity and the smaller scale hydrous plumes between 60 km and 200 km also bring about an overall reduction in the viscosity of SZMF. More fertile and high temperature peridotites are supplied from the entrance to this domain. The domain extends obliquely to the volcanic front and then swings back to the deep mantle together with the subducting slab. The BMW occupies the major portion of upper mantle in the western Pacific and convects largely with a clockwise sense removing the eastern trench oceanward. Sporadic formation of hydrous plume at the depth of around 410 km and the curtain flow adjacent to the trench cause back arc spreading. We envisage that the heat source in BMW could be the accumulated TTG (tonalite–trondhjemite–granodiorite) crust on the bottom of the mantle transition zone. The ongoing process of transportation of granitic crust into the mantle transition zone is evident from the deep subduction of five intra-oceanic arcs on the subducting Philippine Sea plate from the south, in addition to the sediment trapped subduction by the Pacific plate and Philippine Sea plate. The dynamics of MMF, SZMF and BMW domains are controlled by the angle of subduction; a wide zone of MMF in SW Japan is caused by shallow angle subduction of the Philippine Sea plate and the markedly small MMF domain in the Mariana trench is due to the high angle subduction of Pacific plate. The domains in NE Japan and Kyushu region are intermediate between these two. During the Tertiary, a series of marginal basins were formed because of the nearly 2000 km northward shift of the subduction zone along the southern margin of Tethyan Asia, which may be related to the collision of India with Asia and the indentation. The volume of upper mantle under Asia was reduced extensively on the southern margin with a resultant oceanward trench retreat along the eastern margin of Asia, leading to the formation of a series of marginal basins. The western Pacific domain in general is characterized by double-sided subduction; from the east by the oldest Pacific plate and from the south by the oldest Indo-Australian plate. The old plates are hence hydrated extensively even in their central domains and therefore of low temperature. The cracks have allowed the transport of water into the deeper portions of the slab and these domains supply hydrous fluids even to the bottom of the upper mantle. Thus, a fluid dominated upper mantle in the western Pacific drives a number of microplates and promote the plate boundary processes.     

The dynamics of big mantle wedge,magma factory,and metamorphic–metasomatic factory in subduction zones

The East Asian continental margin is underlain by stagnant slabs resulting from subduction of the Pacific plate from the east and the Philippine Sea plate from the south. We classify the upper mantle in this region into three major domains: (a) metasomatic–metamorphic factory (MMF), subduction zone magma factory (SZMF), and the ‘big mantle wedge’ (BMW). Whereas the convection pattern is anticlockwise in the MMF domain, it is predominantly clockwise in the SZMF and BMW, along a cross section from the south. Here we define the MMF as a small wedge corner which is driven by the subducting Pacific plate and dominated by H₂O-rich fluids derived by dehydration reactions, and enriched in large ion lithophile elements (LILE) which cause the metasomatism. The SZMF is a zone intermediate between MMF and BMW domains and constitutes the main region of continental crust production by partial melting through wedge counter-corner flow. Large hydrous plume generated at about 200 km depth causes extensive reduction in viscosity and the smaller scale hydrous plumes between 60 km and 200 km also bring about an overall reduction in the viscosity of SZMF. More fertile and high temperature peridotites are supplied from the entrance to this domain. The domain extends obliquely to the volcanic front and then swings back to the deep mantle together with the subducting slab. The BMW occupies the major portion of upper mantle in the western Pacific and convects largely with a clockwise sense removing the eastern trench oceanward. Sporadic formation of hydrous plume at the depth of around 410 km and the curtain flow adjacent to the trench cause back arc spreading. We envisage that the heat source in BMW could be the accumulated TTG (tonalite–trondhjemite–granodiorite) crust on the bottom of the mantle transition zone. The ongoing process of transportation of granitic crust into the mantle transition zone is evident from the deep subduction of five intra-oceanic arcs on the subducting Philippine Sea plate from the south, in addition to the sediment trapped subduction by the Pacific plate and Philippine Sea plate. The dynamics of MMF, SZMF and BMW domains are controlled by the angle of subduction; a wide zone of MMF in SW Japan is caused by shallow angle subduction of the Philippine Sea plate and the markedly small MMF domain in the Mariana trench is due to the high angle subduction of Pacific plate. The domains in NE Japan and Kyushu region are intermediate between these two. During the Tertiary, a series of marginal basins were formed because of the nearly 2000 km northward shift of the subduction zone along the southern margin of Tethyan Asia, which may be related to the collision of India with Asia and the indentation. The volume of upper mantle under Asia was reduced extensively on the southern margin with a resultant oceanward trench retreat along the eastern margin of Asia, leading to the formation of a series of marginal basins. The western Pacific domain in general is characterized by double-sided subduction; from the east by the oldest Pacific plate and from the south by the oldest Indo-Australian plate. The old plates are hence hydrated extensively even in their central domains and therefore of low temperature. The cracks have allowed the transport of water into the deeper portions of the slab and these domains supply hydrous fluids even to the bottom of the upper mantle. Thus, a fluid dominated upper mantle in the western Pacific drives a number of microplates and promote the plate boundary processes.     

Collision and stress trajectories in Taiwan: a finite element model

Field analyses of Plio-Quaternary compressional deformations in Taiwan have enabled us to reconstruct the paleostress trajectories resulting from the collision of the Luzon arc (Philippine Sea plate) with the Chinese continental margin (Eurasian plate). The direction of the maximum compressional stress σ₁ shows a fan-shaped pattern that we interpret as resulting from the collision of a rigid body (the Luzon arc) indenting a more deformable material (the thick sediments of the Chinese continental margin). Simple analytical models qualitatively explain the fan-shaped pattern, but the influence of various parameters such as boundary conditions and rheology cannot be quantitatively accounted for by this approach. Consequently, we have used a finite element technique to compute the stresses and strains induced by the push of a rigid body against a two-dimensional, viscous material. The boundary conditions are the velocities based on plate kinematics. A motion in the N300°E direction best explains the stress trajectories observed in central Taiwan. Viscosity contrasts as well as small changes in the shape of the northern edge of the indenter have little influence on the computed stress pattern. The most important parameter is the direction of convergence. Our model quantitatively explains the general pattern of the stress trajectories observed in the collision zone of Taiwan, between the Philippine Sea plate and Eurasia.