基于双树复数小波的SAR图像噪声抑制

小波变换由于其良好的时频分离特性以及接近人类视觉系统的多分辨分析,在SAR图像的去噪和复原中得到了很好的应用,但是经典小波变换不具备平移不变性,且得到的高频分量的方向非常有限。复数小波变换是一种具有近似平移不变性、更多方向选择性且能够完全重构的双数正交小波变换,在图像去噪方面表现出更强的性能。建立了复数小波变换分解与重构的过程,并对分解后的实部和虚部图像的高频部分分别进行局部非线性软阈值法滤波。实验结果显示,复数小波变换较小波变换不仅滤除了更多的噪声,而且得到的图像边缘更加平滑。     

基于多方向多源合成孔径雷达数据融合的假彩色正射影像制作

在复杂地形条件下,SAR影像几何失真大,辐射畸变突出,透视收缩、叠掩和阴影等现象严重,制约SAR测图的应用.为此,提出一套基于多方向多源SAR数据融合方法与技术流程,利用不同侧视方向、不同分辨率、多极化的SAR影像数据,融合制作信息量丰富,能够满足应用要求的SAR假彩色正射影像.采用横断山脉区域3 m分辨率的Terra...     

典型地形SAR回波模拟与SAR图像仿真

SAR成像算法的验证需要相应的回波数据, 同时SAR图像目标识别算法的检验需要大量的SAR图像, 针对这一要求, 提出了一种典型地形SAR回波模拟与图像仿真的方法。首先分析了分形布朗曲面及其水平集的特征。在此基础上, 运用中点位移法生成了描述山脉地形的数字高程数据, 提出了生成海岸地形(“归零法”)及河流沟壑地形(“归零取反法”)的新方法。引入电磁散射模型, 计算了每个分辨单元的后向散射系数。给出了基于二维快速傅立叶变换的SAR回波模拟算法的推导过程及相应的仿真结果, 并对结果进行了分析和讨论, 证明了该方法的正确性。     

SAR海洋内波表层流反演方法探讨

基于海洋内波SAR成像机理与M4S海面微波散射成像模型,提出SAR海洋内波表层流反演新方法。首先从SAR图像上获得内波剖面的海面后向散射强度,利用AH理论的线性近似关系得到猜测表层流,通过海面微波散射成像模型仿真海洋内波的SAR海面后向散射强度,利用二分法不断地修改风速和流速梯度等参数,使仿真信号最大程度的逼近实际SAR图像上的海面后向散射强度,输出最终海表层流。以中国南海海区3景海洋内波SAR图像为例,对该方法进行了探讨。结果表明,仿真的海洋内波SAR海面后向散射强度剖面和实际SAR图像上的信号剖面吻合,两者的相关系数达90%以上,说明该反演方法是收敛与可行的。     

Change detection method based on fractal model and wavelet transform for multitemporal SAR images

The interaction is quite complex between a ground object and an electromagnetic wave transmitted by synthetic aperture radar (SAR). In a ground resolution cell illuminated by a radar beam, there are many chaotic scatterers and the whole scattering echo has the chaotic characteristics which is usually described with the fractal theory, and the fractal dimension can be used to detect the change information for multitemporal SAR images. In order to improve the change detection effect with fractal model, this paper proposes a new multitemporal SAR image change detection algorithm based on the fractal model and wavelet transform (called FMWT algorithm). The FMWT algorithm has two advantages. One is insensitive to speckle noise; the other is that the change detection accuracy is improved, comparing with a general fractal change detection (GFCD) algorithm. Since the FMWT algorithm adopts the two-dimensional discrete stationary wavelet transform (TDDSWT) technique, it can obtain different direction sub-images and avoid down-sampling of the discrete wavelet transform (DWT). In the paper, not only the simulative data test has been carried out, but also the real natural disaster SAR images have been checked. Experimental results verify that the FMWT algorithm is feasible for multitemporal SAR image change detection, it is not sensitive to speckle noise of SAR images, and the performance of it is better than that of the GFCD algorithm. At the same time, the size of a sliding window will bring some affection in counting fractal dimensions.     

基于复小波变换的SAR图像斑点滤波方法

斑点噪声的存在使得SAR图像的应用受到较大的限制.文中首先介绍了SAR图像斑点噪声模型以及几种常用的SAR斑点噪声抑制方法;然后对小波变换斑点噪声滤波方法进行分析,提出了基于二元树复小波变换的SAR图像滤波方法.实验比较表明,二元树复小波变换抑制SAR斑点噪声效果明显,较小波变换更具有优越性.     

基于目标关联的多源卫星遥感图像兵营融合检测方法

目前的目标融合检测方法大都是基于多源遥感图像配准的,然而在实际的应用中,成像机理不同的多源遥感图像的精校正和图像间的配准是十分复杂的,难以确保其配准精度.为此,本文提出了一种基于目标关联的多源卫星遥感图像的兵营融合检测方法.该方法不对图像进行配准,而是根据单源图像的目标自动检测结果,利用图像的大地坐标信息,截取包含目标的同一地区的局部遥感图像,再分别提取多源遥感图像目标的特征,并根据其中冗余的特征,对提取的目标区域建立关联,再由关联检验确保特征关联的正确性,最后对目标特征进行融合决策,得到目标融合检测结果.实验结果表明,该方法能有效地利用多源遥感图像的信息,降低遥感图像目标检测的误判率,提高目标特征的准确度.     

SAR图像多尺度积增强的目标检测算法

合成孔径雷达（SAR）成像系统的热噪声和海杂波严重影响SAR图像自动目标检测的性能,去噪和均匀背景杂波是提高SAR图像目标检测性能的重要课题。根据SAR图像噪声功率一般存在于信号小尺度,没有跨尺度特征,而目标信号的边缘具有跨尺度的特点,本文提出了一种多尺度积信号增强和去噪的SAR图像船舰目标检测算法。本算法对SAR图像进行小波变换,应用多尺度积在小波域增强SAR图像船舰信号和均匀背景杂波,再对SAR图像进行目标检测。ERS SAR图像用于验证本文算法。仿真实验结果表明,新算法同传统的双参数CFAR检测算法、基于K-分布背景杂波的检测算法以及基于小波软阈值增强的检测算法相比,在虚警数和品质因数性能指标上均优于后几种检测算法。     

小波变换块自适应矢量量化压缩SAR复图像

随着高分辨率合成孔径雷达的快速发展,SAR系统中所含的数据量越来越大,必须对大量的复图像数据进行压缩,SAR复图像数据的压缩不同于SAR实图像的压缩,通常对相位特性的保持要求很高,所以压缩SAR复图像成为研究中的难点。在分析复图像数据经过小波变换后的相关性变化,研究了使用小波变换块自适应矢量量化(WT-BAVQ)压缩合成孔径雷达复图像的理论依据及具体方法。对一幅复图像进行压缩和解压缩,计算其平均空域相关值和平均相位相关系数,给出了解压缩之后的图像。与块自适应矢量量化(BAVQ),小波变换矢量量化(WT-VQ)小波变换块自适应量化(WT-BAQ)进行了性能比较。实验结果表明,在相同压缩比的条件下,小波块自适应矢量量化算法的平均空域相关值最高。     

使用ERS-1/2干涉测量SAR数据生成DEM

干涉合成孔径雷达（ＩＮＳＡＲ）数据已被证明能生产精确的数据高程模型（ＤＥＭ），我们已开发了从单视ＳＡＲ复影像数据自动生成数字高程模型的新软件，基于ＳＡＲ多视强度影像的最小二乘曩像匹配被用于复影像对的配准，达到很高的配准精度（０．０１～０．０５像元精度）。一种新的计算目标点３维坐标（Ｘ，Ｙ，Ｚ）的方程还被提出，卫星轨道，姿态和基线参数以及相位常数被纳入在方程中并被表示了时间的线性函数，利用至少６个地面控制点能够同时估算这些参数，本文还给出了意大利埃特地区ＥＲＳ－１／２ＳＡＲ数据处理结果。     

Ship detection based on coherence images derived from cross correlation of multilook SAR images

A new simple technique is presented to extract ships from synthetic aperture radar (SAR) images. The procedure is to compute the cross-correlation values between two images extracted by moving windows of a small size from the multilook SAR intensity (or amplitude) images. A coherence image, consisting of the cross-correlation values of the intensity images, is then produced. Ships are deterministic targets, so that their interlook subimages possess higher degree of coherence than the uncorrelated random images of the surrounding sea surface. The main advantage of this method over the conventional constant false-alarm rate is its ability to detect, under favorable conditions, "invisible" images of ships embedded in the speckled image of the sea surface. The technique is tested using a RADARSAT-1 image in which one known and several unknown ships are present. The use of complex images and the exploitation of short decorrelation times of small-scale ocean waves to obtain an extra look are also discussed.     

Detecting and Downscaling Wet Areas on Boreal Landscapes

This letter presents an approach to classify wet areas from European Remote Sensing 2 (ERS-2) synthetic aperture radar (SAR)-, Landsat Thematic Mapper (TM)-, and Light Detection and Ranging (LiDAR)-derived terrain data and downscale the result from the coarse resolution of satellite images to finer resolutions needed for land managers. Using discrete wavelet transform (DWT) and support vector machines (SVM), the algorithm finds multiple relationships between the radar, optical, and terrain data and wet areas at different spatial scales. Decomposing and reconstructing processes are performed using a 2-D DWT (2D-DWT) and inverse 2D-DWT respectively. The underlying relationships between radar, optical, and terrain data and wet areas are learned by training an SVM at the coarse resolution of the wet-area map. The SVM is then applied on the predictors at a finer resolution to produce wet-area detailing images, which are needed to reconstruct a finer resolution wet-area map. The algorithm is applied to a boreal landscape in northern Alberta, Canada, characterized by many wet-area features including ephemeral and permanent streams and wetlands.     

一种匹配滤波结合ChirpScalingSAR数字成像处理方法

合成孔径雷达（ＳＡＲ）是一种重要的微波遥感工具。其关键技术是成像处理,即把接收到的雷达信号转换成雷达图像。事实上,合成孔径就是通过成像处理来实现的。该文在总结目前星载ＳＡＲ各种成像处理算法的基础上,提出一种匹配滤波与ＣｈｉｒｐＳｃａｌｉｎｇ相结合的处理方法。处理过程无需插值便可进行距离迁移校正,还可获得好的聚焦与相位保持性能。所得图像质量超过现有的其它ＳＡＲ成像处理方法所得图像质量。     

Dependence of Waterline Mapping on Radar Frequency Used for SAR Images in Intertidal Areas

Waterline detection in the intertidal areas was investigated through synthetic aperture radar (SAR) images and field measurements. Two valuable facts were found in this letter: 1) A discrepancy of waterlines between L- and P-band airborne SAR images was discovered and investigated through precise global positioning system measurements and the theory of the SAR imaging mechanism. In the intertidal areas having low slopes, the Bragg waves resonant with the radar signal can reside in different depths depending on the radar frequency, with the result that the boundary between water and land can be mapped differently in the respective SAR images. 2) Intertidal areas covered with a water film present low radar backscatter in SAR images, which can cause mislocation of waterlines     

一种从SAR图像中提取城市道路网络的方法

提出一种从高分辨率SAR图像中提取城市道路网络的算法.在高分辨率SAR图像中,道路在空间结构上表现为一细长的且宽度基本恒定不变的均匀区域.利用模糊C均值聚类方法对高分辨率SAR图像进行聚类分析,将道路类像素从原始图像中分离出来.为突出道路形状特征,减少冗余信息,对聚类结果进行细化,同时利用跟踪算子消除短线段;以提取道路中心线二值图的像素值作为图像能量,应用Snakes模型检测道路网络.通过实际SAR图像验证,该算法可以准确提取复杂的城市道路网络.     

基于提升格式小波包变换的SAR图像去噪

基于信号和噪声在提升格式小波分解中呈现出的不同特性，提出了一种新的小波包去噪算法。该算法采用提升格式小波对SAR图像进行最优小波包分解，并计算每个子频带的能量范数，然后根据软阈值法和能量范数区分信号和噪声，达到去除噪声的目的。试验结果表明，该算法对SAR图像具有较好的去噪效果，不仅可以去除图像中的大部分噪声，而且可以较好地保留图像纹理的细节信息。与传统小波包算法相比，其计算速度快了一倍左右。     

基于提升格式小波包变换的SAR影像去噪(英文)

According to the different characteristics that signal and noise exhibit during wavelet decomposition, a new denoising method based on the lifting scheme wavelet packet decomposition is presented. In this method, the SAR images are decomposed by using the best wavelet packet and the norm of each sub-band are calculated; signals and noise can be discriminated based on the norm and soft-threshold method, and the images can be denoised. Experiments show that the proposed algorithm has excellent performance in denoising SAR images, and can remove most noise of images with well-kept texture detail information. The calculating speed of the method is twice the speed of the general wavelet packet transform algorithm.     

Huber–Markov Model for Complex SAR Image Restoration

This letter presents the despeckling of single-look complex (SLC) synthetic aperture radar (SAR) images using nonquadratic regularization. The objective function consists of an image model, a gradient, and a prior model. The Huber–Markov random field (HMRF) models the prior. A numerical solution is achieved through extensions of half-quadratic regularization methods using complex-valued SAR data. The proposed method using the HMRF prior together with nonquadratic regularization shows the superior results on SLC synthetic and actual SAR images.      

A new method for specular and diffuse pseudorange multipath error extraction using wavelet analysis

Multipath remains one of the major challenges in Global Navigation Satellite System (GNSS) positioning because it is considered the dominant source of ranging errors, which can be classified into specular and diffuse types. We present a new method using wavelets to extract the pseudorange multipath in the time domain and breaking it down into the two components. The main idea is an analysis-reconstruction approach based on application of both continuous wavelet transform (CWT) and discrete wavelet transform (DWT). The proposed procedure involves the use of L1 code-minus-carrier (CMC) observable where higher-frequency terms are isolated as residuals. CMC residuals are analyzed by applying the CWT, and we propose the scalogram as a technique for discerning time–frequency variations of the multipath signal. Unlike Fourier transform, the potential of the CWT scalogram for examining the non-stationary and multifrequency nature of the multipath is confirmed as it simultaneously allows fine detection and time localization of the most representative frequencies of the signal. This interpretation of the CWT scalogram is relevant when choosing the levels of reconstruction with DWT, allowing accurate time domain extraction of both the specular and diffuse multipath. The performance and robustness of the method and its boundary applicability are assessed. The experiment was carried out using a receiver of Campania GNSS Network. The results are given in which specular multipath error is achieved using DWT level 7 approximation component and diffuse multipath error is achieved using DWT level 6 denoised detail component.     

机载双基地SAR实测数据成像

建立双基地SAR的单基地等效模型,分析了系统时间同步误差的机理;提出了双基地SAR回波中的直达波数据进行时间同步误差校正的算法;在双基地SAR单站等效模型的基础上,利用时变阶梯变换算法进行成像处理。经过理论分析,实测数据处理验证,这一算法是有效的,能够校正双基地SAR时间同步误差,较好地进行实测数据的成像处理。