唐山曹妃甸浅层地下水水化学特征及咸化成因

为了查明曹妃甸浅层地下水水化学及咸化成因,采集研究区河水、地下淡水、微咸水、咸水、卤水、雨水和海水等不同类型水样,对其水化学组成、离子比、Piper三线图、吉布斯图、氢氧同位素组成及14C测年结果进行了分析。结果表明：(1)曹妃甸浅层地下水包括全新世沉积层潜水和晚更新世沉积层微承压水,且非原始封存在地层中而是形成于全新世中晚期。(2)地下潜水向海方向分布有淡水、微咸水、咸水水质类型,微承压水以咸水和卤水为主要水质类型;近冲洪积扇前缘水化学特征主要受岩石风化作用控制,围填海区及河口处水化学特征受海水混合作用控制,滨海平原区水化学特征主要受蒸发/结晶作用控制。(3)曹妃甸浅层地下水咸化过程主要是晚更新世以来海侵海退时期形成海洋蒸发盐经大气降水和河水多期溶滤所致,其盐分来源于海水蒸发盐,河口及围填海区地下潜水盐分主要来源于现代海水入侵。     

韩城矿区奥灰水化学特征及形成机制探讨

以岩石化学成分、水质分析、同位素组分以及水质动态长期监测等资料为基础，分析了矿区岩溶水介质的赋存与分布等水文地质背景，重点研究了水化学组分特征及其形成机制。结果表明：由矿区边部至中深部，水化学类型由重碳酸硫酸钙镁型向硫酸盐氯化钠钙型过渡，TDS随含水层埋深升高而水质变差，水化学组分主要由溶滤作用经去膏盐化和脱白云岩化过程形成，开采井群水质变劣的主因是矿区中深部高矿化水的混合作用所致。     

银川地区承压水水化学特征及控制因素

银川平原属中温带干旱区,蒸发强烈,潜水水质差,承压水是银川市地下水开采的主要水源。通过ArcMap空间分析、传统作图分析、氢氧同位素分析等方法,分析银川地区承压含水层水化学特征及各含水层水化学特征的差异,探讨了承压水水化学分布特征的控制因素。研究表明,潜水和承压水水化学分布特征在水平和垂直方向上均存在较大差异;第一和第二承压水水化学分布特征在水平方向上相似,在垂直方向上存在一定差异。水平方向上,两层承压水水化学特征存在一定分带性,而潜水无明显规律性。两层承压水在靠近西侧补给区溶解性总固体（TDS）较小,阴离子以HCO-3为主,阳离子以Mg2+和Ca2+为主,向东溶解性总固体逐渐增加,在银川断裂附近,阴离子变为以Cl-和SO2-4为主,阳离子以Na+为主。垂向上,由于银川断裂贯穿承压和潜水含水层,且潜水水位高于承压水位,第二承压水可能主要受到更深层地下水沿着断裂的混入作用,第一承压水可能同时受到更深层地下水和潜水的混入,使得在银川断裂附近,部分第二承压水TDS大于第一承压水,且具有更高含量的Na+和Cl-,及更低含量的Ca2+和HCO-3,也有部分第一承压水TDS大于第二承压水,该部分第一承压水中的个别水样TDS大于潜水。由此得出,银川断裂的发育及其对潜水及承压含水层的贯通作用是控制该区地下水水质的一个重要因素。如果承压水继续过量开采,承压水位持续下降,将进一步激发潜水和更深层地下水的混入,从而导致承压水质恶化。因此控制银川区承压水的过量开采,对于承压水资源的可持续利用至关重要。     

贺兰山西麓典型干旱区绿洲地下水水化学特征与演变规律

针对地下水资源过量开采而出现的绿洲水文生态问题,以贺兰山西麓具有典型特征的内蒙古腰坝绿洲为研究对象,分开采期、非开采期对地下水进行系统取样分析,综合运用描述性统计、相关性分析、离子比例系数和Piper三线图示法,全面系统地研究了地下水水化学的时空变异特征与演变规律。研究结果表明：①季节变化对潜水和承压水水化学类型空间变异性影响较小,潜水水文化学性质受外界因素干扰较大,承压水受外界因素干扰较少;②蒸发浓缩、阳离子交换和人为混合是控制研究区潜水水质演变的主要水文化学过程;③潜水子系统总溶解固体较高,水化学类型变化也较复杂,主要从HCO3·SO4.Cl-Na·Mg·Ca型向Cl·SO4·HCO3-Mg·Na、Cl·SO4-Na·Mg型演化。承压水水化学类型比较单一,主要以低矿化度的HCO3-Na·Mg·Ca型为主。     

内蒙古额济纳平原地下水氢氧稳定同位素和水化学特征及其演化规律

【研究目的】为研究内蒙古额济纳平原地下水水化学特征及其演化规律,于2020年8月采集水样87组,氢氧同位素样品69组。【研究方法】综合运用数理统计、离子比例分析、水文地球化学模拟等方法,分析额济纳平原第四系地下水及北部白垩系地下水水文地球化学特征,探讨水文地球化学演化规律。【研究结果】结果表明：(1)该区地下水水化学类型以SO₄-Na型为主。地下水中阴离子以SO₄^2-为主,其次为Cl^-;阳离子以Na⁺为主,Ca²⁺与Mg²⁺浓度差异不大。(2)研究区地下水SO₄^2-、Cl^-、TDS、总硬度、Na⁺和Mg²⁺浓度具有第四系承压水>第四系潜水>白垩系承压水的特点。(3)第四系潜水离子组分主要受溶滤作用、混合作用控制,局部地区受蒸发作用影响显著;第四系承压水离子组分主要受溶滤作用和阳离子交换作用控制;平原北部白垩系承压水...     

新疆玛纳斯河流域平原区地下水水文地球化学特征研究

地下水是玛纳斯河流域主要的供水水源,为宏观掌握该区地下水化学特征,了解区域地下水主要形成过程,运用舒卡列夫分类法、数学统计法、吉布斯图、离子比及同位素的方法,在分析玛纳斯河流域平原区典型剖面的地下水水化学常量组分、吉布斯图、离子比和同位素特征的基础上,进行了研究区水文地球化学特征研究。结果表明:研究区潜水和承压水水力联系紧密;从上游、中游到下游,潜水、承压水的δ18O、δD值逐渐增大。地下水形成主要受蒸发浓缩、大气降水及碳酸盐岩和硫酸盐岩的溶滤作用。     

新疆车尔臣河地下水水化学特征分析

以新疆车尔臣河地下水为研究对象,对该地区的地下水水化学特征进行了研究.研究结果表明:研究区山区基岩裂隙水化学类型主要为SO4·Cl型、Cl·SO4型;潜水水化学类型总体上由南向北水化学类型由Cl·HCO4型→SO4·HCO4型→Cl·SO4·HCO4型→Cl·SO4型转化,水化学特征与地表水基本一致;承压水化学类型沿车...     

内蒙古土默川平原地下水水文地球化学特征及其成因

通过水文地质调查、水样采集,结合地下水流动系统、统计分析、吉布斯图、Piper三线图和相关性分析,对土默川平原地下水水化学特征进行研究。结果表明,该区地下水呈弱碱性,水化学类型以HCO3-Ca型和Cl-Na型为主。潜水水化学成分主要受水-岩相互作用和蒸发浓缩作用影响,承压水水化学成分主要受水-岩相互作用过程控制。79个潜水样品中方解石和白云石饱和指数小于0的分别为1个和5个,56个承压水样品中饱和指数小于0的均为20个。区域地下水的弱碱性环境、高Na+、低Ca2+为高氟水的形成提供了条件,受蒸发浓缩作用影响潜水高氟区主要分布于托克托县城以东地下水的滞留排泄区;受含水层介质的影响承压水高氟区主要分布于湖积台地区域。局部区域地下水的强还原环境,铁、锰氧化物和氢氧化物的还原性溶解以及HCO–3的竞争吸附是形成高砷水的重要原因,受哈素海湖相沉积物的影响潜水高砷区主要分布在哈素海—高泉营一带;受铁氧化物、氢氧化物还原性溶解及地下水径流条件的控制,承压水高砷区主要分布在平原中部大黑河沿岸。     

河西走廊黑河流域地下水化学特征研究

黑河流域地处西北内陆干旱区,受径流蒸发和溶滤作用的控制,地下水水化学最重要的特征是自补给区至排泄区具有典型的水平分带性和垂直倒置分异规律。水平方向从祁连山山前洪积扇顶部到冲、洪积细土平原北部的盐沼(盐地),表层地下水的矿化度随着径流长度的增加而增高,由淡水过渡为咸水并达到卤水阶段,化学组分亦相应的由HCO3--Na -Ca 型递变为SO42--HCO3--Na -Ca2 型、SO42--Cl--Na -Ca2 型直到Cl--SO42--Na 型、Cl--Na 型,每个水化学带与一定的地貌单元相联系。垂向上在淡承压水分布的区域,上部潜水矿化度0.5～4.0g/L,下部承压水矿化度小于1g/L,且随着深度的增加矿化度降低。     

新疆天北经济带地下水水化学特征与循环演化研究

以天山北麓经济带呼图壁河、玛纳斯河、安集海、奎屯河四个地下水水化学演化剖面为例,从水化学类型随地形地貌的变化特征和水化学演化规律方面揭示了该区域地下水的循环演化及水化学形成机制。潜水和浅层承压水从山前到沙漠边缘水化学类型呈现出明显的分带特征,总体上表现为HCO_3·SO_4-Ca(Mg)→HCO_3·SO_4-Na·Ca→SO_4·Cl-Na(Ca)→Cl·SO_4-Na(Mg);深层承压水从山前补给后进入深层循环,和潜水及浅层承压水表现出相异的循环机制和水化学类型。通过地下水水化学演化剖面的横向和纵向对比,发现TDS由山前到沙漠边缘区变化巨大,由东到西变化规律差异性也较为明显。此外结合区域地下水水化学特征和水文地质条件,从饱和指数和苏林水化学类型两个方面进行分析,探讨天北经济带的地下水水化学循环演化和形成机制。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。