太行山金矿成矿流体的成分——显微红外光谱研究

太行山金矿中流体包裹体的显微红外光谱研究表明,金矿成矿流体的化学组成从简单的Ｈ２Ｏ＋ＮａＣｌ、Ｈ２Ｏ＋ＣＯ２、Ｈ２Ｏ＋ＣＯ２＋ＮａＣｌ到复杂的Ｈ２Ｏ＋ＣＯ２＋ＮａＣｌ＋Ｈ２Ｓ＋ＣＨ４和ＣＯ２＋ＣＨ４＋Ｈ２Ｏ＋ＮａＣｌ体系。首次在太行山金矿的单个流体包裹体中检测到Ｈ２Ｓ和ＣＨ４谱峰对探讨该区成矿流体的演化具有重要理论意义。金矿中存在３类物理性质和化学性质截然不同的流体包裹体,同一梓品中几乎同时出现物     

热液体系中Si的络合作用

在不同温度、ＰＨ和硅浓度条件下,实验标定了Ａｕ－ＳｉＯ以及Ｓｎ－ＳｉＯ２之间的络合反应：Ａｕ＾＋＋Ｈ３ＳｉＯ４＾－之间的络合反应：Ａｕ＾＋＋Ｈ４ＳｉＯ＝ＡｕＨ３ＳｉＯ４ ｌｇＫ＝－１．６５４３６＋９６１１．２１／Ｔ;Ｓｎ＾４＋＋４Ｈ３ＳｉＯ４＾－＝Ｓｎ（Ｈ３ＳｉＯ４）４;ｌｇＫ２００ｃ＝４２．７３。通过与Ａｕ－Ｃｌ、Ａｕ－ＨＳ以及Ｓｎ－ＯＨ络合物迁移能力的比较,表明在具地质意义的Ｐ睡ＥＨ条件下,Ａ     

成矿流体及成矿机制

根据成矿流体样品——流体包裹体研究资料，目前已知的成矿流体主要有下列四种类型：（１）硅酸盐熔融体＋Ｍ（金属）；（２）Ｈ２Ｏ＋ＮａＣｌ＋Ｍ；（３）Ｈ２Ｏ＋ＣＯ２＋Ｍ；（４）Ｈ２Ｏ＋有机质＋Ｍ。这里所说的Ｈ２Ｏ，实际上是含有一定溶质的盐水；ＣＯ２则还包含有ＣＨ４、ＣＯ、Ｎ２、Ｈ２、Ｈ２Ｓ等等其它组分。不同的矿种、不同成因的矿床与一定种类的成矿流体有关，也就是说，成矿流体具有一定成矿专属性。通过成矿流体研究，我们认为成矿作用主要有下述几种形成机制：（１）不同种类流体混合成矿机制；（２）单一流体不混溶分离成矿机制；（３）流体＋有机质成矿机制；（４）水—岩交换成矿机制；（５）流体物－化条件改变成矿机制。     

河台韧性剪切带金矿床成矿物理化学条件研究及熔融包裹体的发现

河台韧性切带金矿床产于震旦系－志留为质岩系深大断裂糜棱岩带中,本研究首次在矿床含矿石英脉及糜棱岩中发现熔融包裹体,流体－熔融包裹体及有机包裹体。不同类型包裹体均一温度,有机包裹体为１６０℃,成矿流体属Ｋ＾＋－Ｃａ＾２＋－Ｍｇ＾２＋－Ｎａ＾＋－ＳＯ４＾２－ＨＣＯ＾２－４－ＨＣＯ３＾－４－Ｃｌ＾－体系,具中偏碱性,微量气体特征：Ｈ２Ｏ〉ＣＯ２〉ＣＨ４〉（或〈）Ｈ２〉ＣＯ〉Ｃ２Ｈ２〉Ｃ２Ｈ６〉Ｏ２〉ＨＪ     

天山巩乃斯河流域季节性积雪化学成分特征与时空变化分析

巩乃斯河流域积雪阴、阳离子的空间变化以Ｋ＋＋Ｎａ＋、Ｃａ２＋与ＳＯ２－４和ＨＣＯ－３等离子最明显;Ｋ＋＋Ｎａ＋与ＳＯ２－４、Ｃａ２＋与ＨＣＯ－３变化基本同步．从新降雪阴、阳离子的时间变化上看,隆冬季节积雪深厚范围广,相应离子含量低．调查区积雪对局地人类活动所造成的污染有较明显的记录．     

氯对测定化合水的影响及其校正研究

用差热和热（失）重法、ｐＨ值检验、离子色谱等分析方法考察和证实了Ｃｌ－对平菲尔特管重量法测定化合水（Ｈ２Ｏ＋）的干扰，研究其影响规律，提出用系数校正方法可获得Ｈ２Ｏ＋的准确结果。方法用于含氯深海沉积物和大洋多金属结核标准物质中Ｈ２Ｏ＋的定值分析，取得满意结果     

沉积CaCO3与金属离子界面反应动力学研究

金属离子与沉积碳酸盐之间２同反应动力学模拟实验表明,由于ＣａＣＯ３快速溶解和溶液ＰＨ急剧上升,大部分Ｐｂ＾２＋、Ｚｎ＾２＋离子与溶液中ＣＯ３＾２－和ＯＨ＾－离子反应生成白铅矿ＰｂＣＯ３、水白铅矿Ｐｂ３（ＯＨ）２（ＣＯ３）２,或Ｚｎ（ＯＨ）３和锌矿Ｚｎ（ＯＨ）６（ＣＯ３）２沉淀于体相溶液中,仅有少部分Ｐｂ＾２＋、Ｚｎ＾２＋通过扩散与ＣａＣＯ３表面发生离子交换反应。２５℃时,Ｐｂ＾２＋溶液中以白铅矿沉     

一种新型高效复合消毒剂：二氧化氯消毒剂

一种新型高效复合消毒剂：二氧化氯消毒剂虞承伟（地质矿产部山西省中心实验室）１ＣｌＯ＿２为强氧化剂在酸性条件下，ＣｌＯ＿２有很强的氧化性：ＣｌＯ＿２＋４Ｈ￣＋＋５ｅ＝Ｃｌ￣－＋Ｈ＿２Ｏ在水处理条件下（ｐＨ＝７），ＣｌＯ＿２＋ｅ＝，Ｅ＿０＝０．９５Ｖ＋２...     

溶液介质条件对重金属离子与石英表面反应的影响

实验研究表明,随着溶液ＰＨ值的升高石芟夺Ｃｕ＾２＋、Ｐｂ＾２＿、Ｃｄ＾２＋等重金属离子的吸附量和表面吸附覆盖率逐渐增大,而表面反应产物的结合开矿相应地出现由单核化合物、多核化合物〖ＳＯＣｕ４（ＯＨ）３＾４＋〗,直至表面沉淀（ＳＯＨ…Ｃｕ（ＯＨ）２（ｓ）〗。随着温度升高,石英对Ｃｕ＾２＋、Ｐｂ＾２＋、Ｃｄ＾２＋等重金属离子的吸附量逐渐减是随着溶液离子强度的增大,石英对Ｃｕ＾２＋离子的吸附量和表面离了     

核磁共振方法找水

核磁共振方法找水我国现行的物理技术是间接找水，而核磁共振方法（ＮＭＲ）找水，则能提供与地下水直接相关的信息。从原理上来讲，这种方法相应的参数则是静磁场条件下水（Ｈ２Ｏ）中所含质子（Ｈ＋）的共振频率．核磁共振找水的理论基础是包括水中Ｈ＋在内的许多原子核...     

Phase equilibria among pumpellyite,lawsonite, epidote and associated minerals in low grade metamorphic rocks

Phase relations of pumpellyite, epidote, lawsonite, CaCO₃, paragonite, actinolite, crossite and iron oxide are analysed on an Al-Ca-Fe³⁺ diagram in which all minerals are projected from quartz, albite or Jadeite, chlorite and fluid. Fe²⁺ and Mg are treated as a single component because variation in Fe²⁺/Mg has little effect on the stability of phases on the diagram. Comparison of assemblages in the Franciscan, Shuksan, Sanbagawa, New Caledonia, Southern Italian, and Otago metamorphic terranes reveals several reactions, useful for construction of a petrogenetic grid:

1. lawsonite+crossite + paragonite = epidote+chlorite + albite + quartz + H₂O
2. lawsonite + crossite = pumpellyite + epidote + chlorite + albite+ quartz + H₂O
3. crossite + pumpellyite + quartz = epidote + actinolite + albite + chlorite + H₂O
4. crossite + epidote + quartz = actinolite + hematite + albite + chlorite + H₂O
5. calcite + epidote + chlorite + quartz = pumpellyite + actinolite + H₂O + CO₂
6. pumpellyite + chlorite + quartz = epidote + actinolite + H₂O

     

Contact metamorphism around the Stawell granite, Victoria, Australia

The contact metamorphosed metapelitic and metapsammitic rocks surrounding the Stawell granite, western Victoria, Australia, are divided into three zones: the low-grade zone, the medium-grade zone and the high-grade zone. Detailed petrological study shows consistency of element distributions, implying that equilibrium was widely attained in the rocks, although equilibrium volumes are generally small (millimetre scale) and considerable mineral chemical variations exist between adjacent domains. The metamorphic mineral assemblages are generally of high variance (KFMASH variance ≤ 2). Consequently, the chemical evolution of assemblages is controlled largely by bulk composition and metamorphic temperature, the former factor being more important in most rocks. The chemographic relations of mineral assemblages in low- and medium- to high-grade zones are presented in compatibility diagrams projected from biotite, quartz and H₂O, and biotite, K-feldspar and H₂O, respectively. These compatibility diagrams have the advantage of showing both quartz-bearing and quartz-absent assemblages. The metamorphic reactions are modelled successfully by a calculated petrogenetic grid that combines both KFASH and KMASH equilibria. Based on petrographic observations and with constraints from the calculated petrogenetic grid, the following KFMASH reactions, in the order of increasing metamorphic grade, are responsible for producing the various mineral assemblages in the Stawell rocks: chl + mu + q = bi + cd + V, chl + q + cd = g + V, mu + bi + q = ksp + cd + V, mu + q = ksp + and + cd + V (or KASH mu + q = ksp + and + V), mu + cd = ksp + and + bi + V, mu + bi + and = ksp + sp + V, and + bi = ksp + sp + cd + V, mu + bi = ksp + cor + sp + V, mu = ksp + cor + and + sp + V (or KASH mu = ksp + cor + V), bi + cd + q = g + ksp + V. The combined KFASH and KMASH grid provides constraints on reaction coefficients in the above sequence of reactions and on temperature and pressure of metamorphism.     

Contrasting mineral parageneses in high-temperature calc-silicate granulites: examples from the Eastern Ghats, India

Abstract Three types of mineral associations are described from calc-silicate granulites from the Eastern Ghats, India, where geothermobarometry in associated rocks suggests extremely high P–T conditions of metamorphism ( c . 9 ± 1 kbar, 950° C). These mineral associations are: (i) calcite + quartz + scapolite + plagioclase, (ii) calcite + scapolite + wollastonite + porphyroblastic garnet + coronal garnet and (iii) calcite + quartz + wollastonite + scapolite + porphyroblastic garnet + coronal garnet, all coexisting with K-feldspar, titanite and clinopyroxene. The first two associations evolved through nearly isobaric cooling retrograde paths, whereas the third evolved through a nearly isothermal decompression path followed by an isobaric cooling retrograde path. Textural and compositional characteristics suggest the following mineral reactions in the calc-silicate granulites: calcite + quartz = wollastonite + CO₂, calcite + plagioclase = scapolite, calcite + scapolite + wollastonite = porphyroblastic garnet ± quartz + CO₂, CaTs + wollastonite = coronal garnet (association ii) and wollastonite + scapolite = coronal garnet (association iii) + quartz + CO₂. Andradite content in garnet was buffered by the redox equilibria wollastonite + hedenbergite + O₂= andradite + quartz (association iii) and wollastonite + andradite + CaTs + scapolite = hedenbergite + calcite + grossular + O₂ (association ii). The contrasting mineral parageneses have been ascribed to interplay of variables such as X _CO2, f _O2, f _HCl in the fluid, bulk Na content and the nature of the retrograde P–T–X _CO2 paths through which the rocks evolved.     

利用小半径X射线粉末相机鉴定几种造岩矿物

自X射线在矿物学中广泛应用以来,很多造岩矿物的成份能够用X射线鉴定了。目前普遍使用的是衍射仪、大半径德拜相机或基尼叶相机,使用小半径相机的还很少。     

Metamorphic evolution of oceanic gabbros: recrystallization from subsolidus to hydrothermal conditions in the MARK area (ODP Leg 153)

The 117.38 m of gabbroic core drilled during the Ocean Drilling Program (ODP) Leg 153 at Sites 921 to 924 in the Mid-Atlantic Ridge (MAR) between 23 °N and the Kane Fracture Zone, exhibits a remarkable primary compositional heterogeneity, such as magmatic layering, intrusive contacts and late magmatic veining, which express a succession of magmatic events. Textural indicators suggest that the cooling of the crystal mush occurred in a dynamic environment, with infiltration of progressively evolved liquids. Magmatic features include random shape fabric and magmatic lamination; the subsequent deformational overprint occurred in subsolidus conditions. The ductile deformation, generally concentrated in discrete domains of the gabbro, is associated with continuous re-equilibration of the metamorphic assemblages of (1) olivine + clinopyroxene + orthopyroxene + plagioclase + ilmenite + Ti-magnetite, (2) olivine + clinopyroxene + plagioclase + ilmenite + Ti-magnetite + red hornblende. At lower temperatures brittle deformation prevails and subsequent fractures control the development of metamorphic assemblages: (3) clinopyroxene + plagioclase + red brown hornblende + Ti-magnetite + magnetite (?) + ilmenite, (4) plagioclase + brown hornblende + Ti-magnetite + magnetite + hematite + titanite ± Ti-oxide, (5) plagioclase + green hornblende + magnetite + titanite, (6) plagioclase + actinolite + chlorite + titanite + magnetite, (7) albite + actinolite + chlorite + prehnite ± epidote ± titanite and (8) albite + prehnite + chlorite ± smectite. Assemblages 1 to 8 express increasing water/rock ratios and decreasing degrees of recrystallization.

During the ductile phase, red hornblende is stable and its abundance increases with deformation intensity, possibly as an effect of the introduction of hydrous fluids. During the brittle phase, water diffusion controls the development of the fracture-filling mineral assemblages and re-equilibration of the adjacent rock; temperatures decrease further, as demonstrated by mineral zoning and incompletely re-equilibrated assemblages. The lowest temperatures correspond to the development of hydrothermal assemblages.

Compared with oceanic gabbros from fast-spreading transform environments, high-temperature ductile phases (granulite and amphibolite) are well developed, whereas brittle phases are widespread, as microcracks, prevalent on fracturing associated with discrete veins.     

High-temperature 'clockwise'P-T paths and melting in the development of regional migmatites: an example from southern Brittany, France

The Southern Brittany Migmatite Belt (SBMB), which evolved through the metamorphic peak between c. 400 Ma and c. . 370 Ma ago, consists of a heterogeneous suite of high-grade gneisses and anatectic migmatites, both metatexites and diatexites. Rare garnet-cordierite gneiss layers record evidence of an early prograde P-T path. In these rocks, growth-zoned garnet cores and a sequence of included mineral assemblages in garnet, from core to rim, of Qtz + Ilm + Ky, Pl + Ky + St + Rt + Bt and Pl + Sil + St + Rt + Bt constrain a prograde evolution during which the reactions Ilm + Ky + Qtz→ Aim + Rt, Ms + Chl→ St + Bt + Qtz + V and St + Qtz→ Grt + Sil + V were crossed. Parts of this prograde evolution are preserved as inclusion assemblages in garnet in all other rock types. In all rock types, garnet has reverse zoned rims, and garnet replacement by cordierite and/or biotite and plagioclase suggests the following reactions have occurred: Grt + Sil + Qtz→ Crd → Hc ± Ilm, Bt + Sil + Qtz → Crd ± Hc → Ilm → Kfs + V and (Na + Ca + K + Ti) + Grt → Bt + Pl + Qtz. Microstructural analysis of reaction textures in conjunction with a petrogenetic grid has enabled the construction of a tightly constrained 'clockwise' P–T path for the SBMB. The high-temperature part of the path has a steep dT/dP slope characteristic of near isothermal decompression. It is proposed that the P-T path followed by the SBMB is the result of the inversion, by overthrusting, of a back-arc basin and that such a tectonic setting may be applicable to other high-temperature migmatite terranes. The near isothermal decompression is at least partly driven by the upward (diapiric) movement of the diatexite/anatectic granite core of the SBMB.     

Two occurrences of ultramafic hornfels in the Biggenden Beds,southeastern Queensland

Ultramafic hornfelses containing the assemblages hornblende + olivine + spinel + magnetite, and clinopyroxene + olivine + spinel + magnetite, are reported from two localities in the Biggenden Beds in southeastern Queensland. They are associated with mafic hornfelses in the contact metamorphic aureoles of the Mungore Adamellite and the Wateranga Gabbro. Chemical composition and minerology of the olivine + amphibole + spinel + magnetite hornfelses suggest that they represent metamorphosed picritic rocks, or possibly, altered serpentinites (blackwall rocks), whereas the clinopyroxene + olivine + spinel + magnetite hornfelses are interpreted as metamorphosed altered clinopyroxene‐rich picritic rocks. Cr‐Fe spinel relations in the hornfelses indicate partial homogenisation of primary chromian spinel with secondary magnetite ± ferrichromite during contact metamorphism.     

Polymetamorphic origin of muscovite+cordierite+staurolite+ biotite assemblages: implications for the metapelitic petrogenetic grid and for P–T paths

Metapelites containing muscovite, cordierite, staurolite and biotite (Ms+Crd+St+Bt) are relatively rare but have been reported from a number of low-pressure (andalusite–sillimanite) regional metamorphic terranes. Paradoxically, they do not occur in contact aureoles formed at the same low pressures, raising the question as to whether they represent a stable association. A stable Ms+Crd+St+Bt assemblage implies a stable Ms+Bt+Qtz+Crd+St+Al₂SiO₅+Chl+H₂O invariant point (IP1), the latter which has precluded construction of a petrogenetic grid for metapelites that reconciles natural phase relations at high and low pressure. Petrogenetic grids calculated from internally consistent thermodynamic databases do not provide a reliable means to evaluate the problem because the grid topology is sensitive to small changes in the thermodynamic data. Topological analysis of invariant point IP1 places strict limits on possible phase equilibria and mineral compositions for metamorphic field gradients at higher and lower pressure than the invariant point. These constraints are then compared with natural data from contact aureoles and reported Ms+Crd+St+Bt occurrences. We find that there are numerous topological, textural and compositional incongruities in reported natural assemblages that lead us to argue that Ms+Crd+St+Bt is either not a stable association or is restricted to such low pressures and Fe-rich compositions that it is rarely if ever developed in natural rocks. Instead, we argue that reported Ms+Crd+St+Bt assemblages are products of polymetamorphism, and, from their textures, are useful indicators of P–T  paths and tectonothermal processes at low pressure. A number of well-known Ms+Crd+St+Bt occurrences are discussed within this framework, including south-central Maine, the Pyrenees and especially SW Nova Scotia.     

Low-pressure granulite facies metapelitic assemblages and corona textures from MacRobertson Land, east Antarctica: the importance of Fe2O3 and TiO2 in accounting for spinel-bearing assemblages

Low-pressure granulite facies metasedimentary gneisses exposed in MacRobertson Land, east Antarctica, include hercynitic spinel-bearing metapelitic gneisses. Peak metamorphic mineral assemblages include spinel + rutile + ilmenite + sillimanite + garnet, spinel + ilmenite + sillimanite + garnet + cordierite, ortho-pyroxene + magnetite + ilmenite + garnet, spinel + cordierite + biotite + ilmenite and orthopyroxene + cordierite + biotite, each with quartz, K-feldspar and melt. The presence of garnet + biotite- and cordierite + orthopyroxene-bearing assemblages implies crossing tie-lines in AFM projection for the K₂O-FeO-MgO-Al₂O₃-SiO₂-H₂O (KFMASH) system. This apparent contradiction, and the presence of spinel, rutile and ilmenite in the assemblages, is acounted for by using the KFMASH-TiO₂-O₂ system, i.e. AFM + TiO₂+ Fe₂O₃. We derive a petrogenetic grid for this system, applicable to low-pressure granulite facies metamorphic conditions. Retrograde assemblages are interpreted from corona textures on hercynitic spinel and Fe-Ti oxides. The relative positions of the peak and retrograde metamorphic assemblages on the petrogenetic grid suggest that corona development occurred during essentially isobaric cooling.     

Multi-stage pseudomorphic replacement of garnet during polymetamorphism: 2. Algebraic analysis of mineral assemblages

Chemical relationships among four metapelites have been studied by investigation of mineral and bulk chemistry data and by singular value decomposition analysis of single and composite assemblage matrices. Bulk rock compositions cluster close together in an AFM diagram, all within the intersection space defined by the four sample assemblages. The similarity of bulk compositions normalized on a silica-free, anhydrous basis indicates that sample chemistries differ mainly as a result of inhomogeneous distribution of quartz layers. The existence of mass balance relationships among samples indicates that assemblages also overlap in the Si–Ti–Al–Fe–Mg–Mn–Ca–Na–K multisystem. Analysis of single and composite matrices helps in defining possible mass balances linking sample mineral facies to one another during progressive contact metamorphism. The assemblage in sample A can form as the result of the model reaction 5.000  Ky+0.269 Grt+0.965 Bt+0.314 Pl=0.049 Ilm+1.115 Ms+0.849 Chl+0.306 St and react to assemblage B via reaction 0.97 Chl+0.52 Grt+0.66 Ms+0.14 Ilm+1.26  Ky=0.42 St+0.63 Bt+0.22 Pl coupled with the Ky→And transition. Assemblage B can transform into C by initial progress of Ky+Ilm+Chl+Grt+Ms=And+St+Bt+Pl followed by 0.142 Ilm+0.175 St+1.089 Chl+1.533 Ms+0.003 Grt=5.000 And+1.266 Bt+0.551 Pl Matrix analysis cannot satisfactorily model the C–D transition, because it predicts a net production of staurolite, which is in disagreement with petrographic evidence. All mass balances in the C–D composite matrix indicate net consumption of muscovite; this is integrated with the contrasting evidence of prograde pseudomorphs of muscovite after staurolite, observed in the nodules of sample D, within a model involving the progress of ionic reaction cycles.