Integrated 3D forward stratigraphic and petroleum system modeling of the Levant Basin,Eastern Mediterranean

The Eastern Mediterranean Levant Basin is a proven hydrocarbon province with recent major gas discoveries. To date, no exploration wells targeted its northern part, in particular the Lebanese offshore. The present study assesses the tectono‐stratigraphic evolution and related petroleum systems of the northern Levant Basin via an integrated approach that combines stratigraphic forward modeling and petroleum systems/basin modeling based on the previous published work. Stratigraphic modeling results provide a best‐fit realisation of the basin‐scale sedimentary filling, from the post‐rift Upper Jurassic until the Pliocene. Simulation results suggest dominant eastern marginal and Arabian Plate sources for Cenozoic siliciclastic sediments and a significant contribution from the southern Nilotic source mostly from Lower Oligocene to Lower Miocene. Basin modeling results suggest the presence of a working thermogenic petroleum system with mature source rocks localised in the deeper offshore. The generated hydrocarbons migrated through the deep basin within Jurassic and Cretaceous permeable layers towards the Latakia Ridge in the north and the Levant margin and offshore topographic highs. Furthermore, the basin model indicates a possibly significant influence of salt deposition during Messinian salinity crisis on formation fluids. Ultimately, the proposed integrated workflow provides a powerful tool for the assessment of petroleum systems in underexplored areas.     

The structural evolution of the Halten Terrace,offshore Mid‐Norway: extensional fault growth and strain localisation in a multi‐layer brittle–ductile system

Tectonic subsidence in rift basins is often characterised by an initial period of slow subsidence (‘rift initiation’) followed by a period of more rapid subsidence (‘rift climax’). Previous work shows that the transition from rift initiation to rift climax can be explained by interactions between the stress fields of growing faults. Despite the prevalence of evaporites throughout the geological record, and the likelihood that the presence of a regionally extensive evaporite layer will introduce an important, sub‐horizontal rheological heterogeneity into the upper crust, there have been few studies that document the impact of salt on the localisation of extensional strain in rift basins. Here, we use well‐calibrated three‐dimensional seismic reflection data to constrain the distribution and timing of fault activity during Early Jurassic–Earliest Cretaceous rifting in the Åsgard area, Halten Terrace, offshore Mid‐Norway. Permo‐Triassic basement rocks are overlain by a thick sequence of interbedded halite, anhydrite and mudstone. Our results show that rift initiation during the Early Jurassic was characterised by distributed deformation along blind faults within the basement, and by localised deformation along the major Smørbukk and Trestakk faults within the cover. Rift climax and the end of rifting showed continued deformation along the Smørbukk and Trestakk faults, together with initiation of new extensional faults oblique to the main basement trends. We propose that these new faults developed in response to salt movement and/or gravity sliding on the evaporite layer above the tilted basement fault blocks. Rapid strain localisation within the post‐salt cover sequence at the onset of rifting is consistent with previous experimental studies that show strain localisation is favoured by the presence of a weak viscous substrate beneath a brittle overburden.     

Polyphase evolution of the East Gobi basin: sedimentary and structural records of Mesozoic–Cenozoic intraplate deformation in Mongolia

Mapping and correlation of 2D seismic reflection data define the overall subsurface structure of the East Gobi basin (EGB), and reflect Jurassic–Cretaceous intracontinental rift evolution through deposition of at least five distinct stratigraphic sequences. Three major northeast–southwest‐trending fault zones divide the basin, including the North Zuunbayan (NZB) fault zone, a major strike‐slip fault separating the Unegt and Zuunbayan subbasins. The left‐lateral NZB fault cuts and deforms post‐rift strata, implying some post‐middle‐Cretaceous movement. This fault likely also had an earlier history, based on its apparent role as a basin‐bounding normal or transtensional fault controlling deposition of the Jurassic–Cretaceous synrift sequence, in addition to radiometric data suggesting a Late Triassic (206–209 Ma) age of deformation at the Tavan Har locality. Deposits of the Unegt subbasin record an early history of basin subsidence beginning ～155 Ma, with deposition of the Upper Jurassic Sharilyn and Lower Cretaceous Tsagantsav Formations (synrift sequences 1–3). Continued Lower Cretaceous synrift deposition is best recorded by thick deposits of the Zuunbayan Formation in the Zuunbayan subbasin, including newly defined synrift sequences 4–5. Geohistory modelling supports an extensional origin for the EGB, and preliminary thermal maturation studies suggest that a history of variable, moderately high heat flow characterized the Jurassic–Cretaceous rift period. These models predict early to peak oil window conditions for Type 1 or Type 2 kerogen source units in the Upper Tsagantsav/Lower Zuunbayan Formations (Synrift Sequences 3–4). Higher levels of maturity could be generated from distal depocentres with greater overburden accumulation, and this could also account for the observed difference in maturity between oil samples from the Tsagan Els and Zuunbayan fields.     

Compressional salt tectonics and synkinematic strata of the western Kuqa foreland basin,southern Tian Shan,China

The synkinematic strata of the Kuqa foreland basin record a rich history of Cenozoic reactivation of the Palaeozoic Tian Shan mountain belt. Here, we present new constraints on the history of deformation in the southern Tian Shan, based on an analysis of interactions between tectonics and sedimentation in the western Kuqa basin. We constructed six balanced cross‐sections of the basin, integrating surface geology, well data and a grid of seismic reflection profiles. These profiles show that the Qiulitage fold belt on the southern edge of the Kuqa basin developed by thin‐skinned compression salt tectonics. The structural styles have been influenced by two major factors: the nature of early‐formed diapirs and the basinward depositional limit of the Kumugeliemu salt. Several early diapirs developed in the western Kuqa basin, soon after salt deposition, which acted to localize the subsequent shortening. Where diapirs had low relief and a thick overburden they tended to tighten into salt domes 3000–7000 m in height. Conversely, where the original diapirs had higher relief and a thinner overburden they tended to evolve into salt nappes, with the northern flanks of the diapirs thrusting over their southern flanks. Salt was expelled forward, up dip along the mother salt layer, tended to accumulate at the distal pinch‐out of Kumugeliemu salt located at the Qiulitage fold belt. Furthermore, the synkinematic strata (6–8 km thick) of the Kuqa basin indicate that during the Cenozoic reactivation of the Tian Shan, shortening of the western Kuqa basin was mainly in the hinterland until the early Miocene. Then, compression spread simultaneously southwards to the Dawanqi anticline, the Qiulitage fold belt and the southernmost blind detachment fold at the end of Miocene. The western Kuqa basin has a shortening of ca. 23 km. We consider that ca. 9 km was consumed from the end of the Miocene (5.2/5.8 Ma) to the early Pleistocene (2.58 Ma) and another ca. 14 km have been absorbed since then. Thus, we obtain a ca. 3.4/2.8 mm year^?1 average shortening from 5.2/5.8 to 2.58 Ma, followed by a 60–90% increase in average shortening rate to ca. 5.4 mm year^?1 since 2.58 Ma. This suggests that the reactivation of the modern Tian Shan has been accelerating up to the present day.     

Structural style and evolution of a salt‐influenced rift basin margin; the impact of variations in salt composition and the role of polyphase extension

Because salt can decouple sub‐ and supra‐salt deformation, the structural style and evolution of salt‐influenced rifts differs from those developed in megoscopically homogenous and brittle crust. Our understanding of the structural style and evolution of salt‐influenced rifts comes from scaled physical models, or subsurface‐based studies that have utilised moderate‐quality 2D seismic reflection data. Relatively few studies have used high‐quality 3D seismic reflection data, constrained by borehole data, to explicitly focus on the role that along‐strike displacement variations on sub‐salt fault systems, or changes in salt composition and thickness, play in controlling the four‐dimensional evolution of supra‐salt structural styles. In this study, we use 3D seismic reflection and borehole data from the Sele High Fault System (SHFS), offshore Norway to determine how rift‐related relief controlled the thickness and lithology of an Upper Permian salt‐bearing layer (Zechstein Supergroup), and how the associated variations in the mechanical properties of this unit influenced the degree of coupling between sub‐ and supra‐salt deformation during subsequent extension. Seismic and borehole data indicate that the Zechstein Supergroup is thin, carbonate‐dominated and immobile at the footwall apex, but thick, halite‐dominated and relatively mobile in high accommodation areas, such as near the lateral fault tips and in the immediate hangingwall of the fault system. We infer that these variations reflect bathymetric changes related to either syn‐depositional (i.e. Late Permian) growth of the SHFS or underfilled, fault scarp‐related relief inherited from a preceding (i.e. Early Permian) rift phase. After a period of tectonic quiescence in the Early Triassic, regional extension during the Late Triassic triggered halokinesis and growth of a fault‐parallel salt wall, which was followed by mild extension in the Jurassic and forced folding of Triassic overburden above the fault systems upper tip. During the Early Cretaceous, basement‐involved extension resulted in noncoaxial tilting of the footwall, and the development of an supra‐salt normal fault array, which was restricted to footwall areas underlain by relatively thick mobile salt; in contrast, at the footwall apex, no deformation occurred because salt was thin and immobile. The results of our study demonstrate close coupling between tectonics, salt deposition and the style of overburden deformation for >180 Myr of the rift history. Furthermore, we show that rift basin tectono‐stratigraphic models based on relatively megascopically homogeneous and brittle crust do not appropriately describe the range of structural styles that occur in salt‐influenced rifts.     

Jurassic rifting to post‐rift subsidence analysis in the Central High Atlas and its relation to salt diapirism

The subsidence evolution of the Tethyan Moroccan Atlas Basin, presently inverted as the Central High Atlas, is characterized by an Early Jurassic rifting episode, synchronous with salt diapirism of the Triassic evaporite‐bearing rocks. Two contrasting regions of the rift basin – with and without salt diapirism – are examined to assess the effect of salt tectonics in the evolution of subsidence patterns and stratigraphy. The Djebel Bou Dahar platform to basin system, located in the southern margin of the Atlas Basin, shows a Lower Jurassic record of normal faulting and lacks any evidence of salt diapirism. In contrast, the Tazoult ridge and adjacent Amezraï basin, located in the centre of the Atlas Basin, reveals spectacular Early Jurassic diapirism. In addition, we analyse alternative Central High Atlas post‐Middle Jurassic geohistories based on new thermal and burial models (GENEX^® 4.0.3 software), constrained by new vitrinite reflectance data from the Amezraï basin. The comparison of the new subsidence curves from the studied areas with published subsidence curves from the Moroccan Atlas, the Saharan Atlas (Algeria) and Tunisian Atlas show that fast subsidence peaks were diachronous along the strike, being younger towards the east from Early–Middle Jurassic to Late Cretaceous. This analysis also evidences a close relationship between these high subsidence rate episodes and salt diapirism.     

Morphology and origin of major Cenozoic sequence boundaries in the eastern North Sea Basin: top Eocene,near‐top Oligocene and the mid‐Miocene unconformity

Unconformities in sedimentary successions (i.e. sequence boundaries) form in response to the interplay between a variety of factors such as eustasy, climate, tectonics and basin physiography. Unravelling the origin of sequence boundaries is thus one of the most pertinent questions in the analysis of sedimentary basins. We address this question by focusing on three of the most marked physical discontinuities (sequence boundaries) in the Cenozoic North Sea Basin: top Eocene, near‐top Oligocene and the mid‐Miocene unconformity. The Eocene/Oligocene transition is characterized by an abrupt increase in sediment supply from southern Norway and by minor erosion of the basin floor. The near‐top Oligocene and the mid‐Miocene unconformity are characterized by major changes in sediment input directions and by widespread erosion along their clinoform breakpoints. The mid‐Miocene shift in input direction was followed by a marked increase in sediment supply to the southern and central North Sea Basin. Correlation with global δ¹⁸O records suggests that top Eocene correlates with a major long‐term δ¹⁸O increase (inferred climatic cooling and eustatic fall). Near‐top Oligocene does not correlate with any major δ¹⁸O events, while the mid‐Miocene unconformity correlates with a gradual decrease followed by a major long‐term increase in δ¹⁸O values The abrupt increases in sediment supply in post‐Eocene and post‐middle Miocene time correlate with similar changes worldwide and with major δ¹⁸O increases, suggesting a global control (i.e. climate and eustasy) of the post‐Eocene sedimentation in the North Sea Basin. Erosional features observed at near‐top Oligocene and at the mid‐Miocene unconformity are parallel to the clinoform breakpoints and resemble scarps formed by mass wasting. Incised valleys have not been observed, indicating that sea level never fell significantly below the clinoform breakpoint during the Oligocene to middle Miocene.     

Salt tectonics driven by differential sediment loading: stability analysis and finite-element experiments

At many continental margins, differential sediment loading on an underlying salt layer drives salt deformation and has a significant impact on the structural evolution of the basin. We use 2‐D finite‐element modelling to investigate systems in which a linear viscous salt layer underlies a frictional‐plastic overburden of laterally varying thickness. In these systems, differential pressure induces the flow of viscous salt, and the overburden experiences updip deviatoric tension and downdip compression. A thin‐sheet analytical stability criterion for the system is derived and is used to predict conditions under which the sedimentary overburden will be unstable and fail, and to estimate the initial velocities of the system. The analytical predictions are in acceptable agreement with initial velocity patterns of the numerical models. In addition to initial stability analyses, the numerical model is used to investigate the subsequent finite deformation. As the systems evolve, overburden extension and salt diapirism occur in the landward section and contractional structures develop in the seaward section. The system evolution depends on the relative widths of the salt basin and the length scale of the overburden thickness variation. In narrow salt basins, overburden deformation is localised and characterised by high strain rates, which cause the system to reach a gravitational equilibrium and salt movement to cease earlier than for wide salt basins. Sedimentation enhances salt evacuation by maintaining a differential pressure in the salt. Continued sedimentary filling of landward extensional basins suppresses landward salt diapirism. Sediment progradation leads to seaward propagation of the landward extensional structures and depocentres. At slow sediment progradation rates, the viscous flow can be faster than the sediment progradation, leading to efficient salt evacuation and salt weld formation beneath the landward section. Fast sediment progradation suppresses the viscous flow, leaving salt pillows beneath the prograding wedge.     

Tectonic evolution of sedimentary basins of northern Somalia

Regional seismic reflection profiles tied to lithological and biostratigraphic data from deep exploration wells have been used to determine the structure and evolution of the poorly known basins of northern Somalia. We recognize six major tectonostratigraphic sequences in the seismic profiles: Middle‐Late Jurassic syn‐rift sequences (Adigrat and Bihen Group), ?Cenomanian‐Campanian syn‐rift sequences (Gumburo Group), Campanian‐Maastrichtian syn‐rift sequences (Jesomma Sandstones), Palaeocene post‐rift sequences (Auradu Limestones), Early‐Middle Eocene post‐rift sequences (Taleh Formation) and Oligocene‐Miocene (Daban Group) syn‐rift sequences. Backstripping of well data provides new constraints on the age of rifting, the amount of crustal and mantle extension, and the development of the northern Somalia rifted basins. The tectonic subsidence and uplift history at the wells can be explained by a uniform extension model with three episodes of rifting punctuated by periods of relative tectonic quiescence and thermal subsidence. The first event initiated in the Late Jurassic (~156 Ma) and lasted for ~10 Myr and had a NW‐SE trend. We interpret the rift as a late stage event associated with the break‐up of Gondwana and the separation of Africa and Madagascar. The second event initiated in the Late Cretaceous (~80 Ma) and lasted for ~20–40 Myr. This event probably correlates with a rapid increase in spreading rate on the ridges separating the African and Indian and African and Antarctica plates and a contemporaneous slowing down of Africa's plate motion. The backstripped tectonic subsidence data can be explained by a multi‐rift extensional model with stretching factor, β, of 1.09–1.14 and 1.05–1.28 for the first and second rifting events, respectively. The model, fails, however, to completely explain the slow subsidence and uplift history of the margin during Early Cretaceous to Late Cretaceous. We attribute this slow subsidence to the combined effect of a sea‐level fall and regional uplift, which caused a major unconformity in northern Somalia. The third and most recent event occurred in the Oligocene (~32 Ma) and lasted for ~10 Myr. This rift developed along the Gulf of Aden and reactivated the Guban, Nogal and Daroor basins, and is related to the opening of the Gulf of Aden. As a result of these events the crust and upper mantle were thinned by up to a factor of two in some basins. In addition, several distinct petroleum systems developed. The principal exploration play is for Mesozoic petroleum systems with the syn‐rift Oligocene‐Miocene as a subordinate objective owing to low maturity and seal problems. The main seals for the different plays are various shales, some of which are also source rocks, but the Early Eocene evaporites of the Taleh formations can also perform a sealing role for Palaeogene or older generated hydrocarbons migrating vertically.     

Architecture of the evaporite accumulation and salt structures dynamics in Tiddlybanken Basin,southeastern Norwegian Barents Sea

An extensive, reprocessed two‐dimensional (2D) seismic data set was utilized together with available well data to study the Tiddlybanken Basin in the southeastern Norwegian Barents Sea, which is revealed to be an excellent example of base salt rift structures, evaporite accumulations and evolution of salt structures. Late Devonian–early Carboniferous NE‐SW regional extensional stress affected the study area and gave rise to three half‐grabens that are separated by a NW‐SE to NNW‐SSE trending horst and an affiliated interference transfer zone. The arcuate nature of the horst is believed to be the effect of pre‐existing Timanian basement grain, whereas the interference zone formed due to the combined effect of a Timanian (basement) lineament and the geometrical arrangement of the opposing master faults. The interference transfer zone acted as a physical barrier, controlling the facies distribution and sedimentary thickness of three‐layered evaporitic sequences (LES). During the late Triassic, the northwestern part of a salt wall was developed due to passive diapirism and its evolution was influenced by halite lithology between the three‐LES. The central and southeastern parts of the salt wall did not progress beyond the pedestal stage due to lack of halite in the deepest evaporitic sequence. During the Triassic–Jurassic transition, far‐field stresses from the Novaya Zemlya fold‐and‐thrust belt reactivated the pre‐salt Carboniferous rift structures. The reactivation led to the development of the Signalhorn Dome, rejuvenated the northwestern part of the salt wall and affected the sedimentation rates in the southeastern broad basin. The salt wall together with the Signalhorn Dome and the Carboniferous pre‐salt structures were again reactivated during post‐Early Cretaceous, in response to regional compressional stresses. During this main tectonic inversion phase, the northwestern and southeastern parts of the salt wall were rejuvenated; however, salt reactivation was minimized towards the interference transfer zone beneath the centre of the salt wall.     

Structural evolution of the Gediz Graben,SW Turkey: temporal and spatial variation of the graben basin

The structural evolution of the Miocene to Recent Gediz Graben is intimately related to the evolution of its southern margin. This margin is shaped by a time‐transgressive, composite structure that possesses flat‐ramp geometry with three separate dip domains: a low‐angle shallow segment; a steeper middle segment; and a low‐angle deeper segment. This geometry was probably produced by one of two mechanisms, which operated perpendicular to the general trend of the graben, resulting in gradual back‐rotation followed by abandonment of the shallow segment as it was dissected by the high‐angle normal fault(s). The geometry of the southern margin structure is not simple along‐strike. It includes broad undulations and discrete fault segments, developed by large‐scale fault growth processes through segment linkage. The along‐strike growth of the southern margin‐bounding structure is responsible for the composite character of the Gediz Graben and controls the observed stratigraphic variability. Two sub‐basins aligned with the major segments of the southern graben margin structure have been investigated. The Salihli and Ala?ehir sub‐basins comprising 3000 m sedimentary thickness are separated by an intervening basement high, that is covered by a thin veneer of post‐Miocene sediments. The two sub‐basins, which evolved as isolated basins during most of the graben history, amalgamated during post‐Miocene time to form the composite configuration of the graben. There is a general east to west trend of growth for the Gediz Graben.     

Constraining provenance,thickness and erosion of nappes using low‐temperature thermochronology: the Northland Allochthon,New Zealand

The Northland Allochthon, an assemblage of Cretaceous–Oligocene sedimentary rocks, was emplaced during the Late Oligocene–earliest Miocene, onto the in situ Mesozoic and early Cenozoic rocks (predominantly Late Eocene–earliest Miocene) in northwestern New Zealand. Using low‐temperature thermochronology, we investigate the sedimentary provenance, burial and erosion histories of the rocks from both the hanging and footwalls of the allochthon. In central Northland (Parua Bay), both the overlying allochthon and underlying Early Miocene autochthon yield detrital zircon and partially reset apatite fission‐track ages that were sourced from the local Jurassic terrane and perhaps Late Cretaceous volcanics; the autochthon contains, additionally, material sourced from Oligocene volcanics. Thermal history modelling indicates that the lower part of the allochthon together with the autochthon was heated to ca. 55–100°C during the Late Oligocene and Early Miocene, most likely due to the burial beneath the overlying nappe sequences. From the Mesozoic basement exposed in eastern Northland, we obtained zircon fission‐track ages tightly bracketed between 153 and 149 Ma; the apatite fission‐track ages on the other hand, generally young towards the northwest, from 129 to 20.9 Ma. Basement thermochronological ages are inverted to simulate the emplacement and later erosion of the Northland Allochthon, using a thermo‐kinematic model coupled with an inversion algorithm. The results suggest that during the Late Oligocene, the nappes in eastern Northland ranged from ca. 4–6‐km thick in the north to zero in the Auckland region (over a distance >200 km). Following the allochthon emplacement, eastern Northland was uplifted and unroofed during the Early Miocene for a period of ca. 1–6 Myr at the rate of 0.1–0.8 km/Myr, leading to rapid erosion of the nappes. Since Middle Miocene, the basement uplift ceased and the erosion of the nappes and the region as a whole slowed down (ca. 0–0.2 km/Myr), implying a decay in the tectonic activity in this region.     

Sedimentary and structural record of the Albian growth of the Bakio salt diapir (the Basque Country,northern Spain)

However salt has a viscous rheology, overburden rocks adjacent to salt diapirs have a brittle rheology. Evidence of deformation within the overburden has been described from diapirs worldwide. Gravity‐driven deposits are also present along the flanks of several diapirs. The well‐known example from the La Popa Basin in northern Mexico shows that such deposits may be organized into halokinetic sequences. This leads to several questions: (i) How does diapir growth contribute to overburden deformation? (ii) Are halokinetic sequence models valid for other areas beyond the La Popa Basin. The Bakio diapir and its well‐exposed overburden in Basque Country, Spain provides key elements to address these questions. The Bakio diapir consists of Triassic red clays and gypsum and is flanked by synkinematic middle to upper Albian units that thin towards the diapir. The elongate diapir parallels the Gaztelugatxe normal fault to the NE: both strike NE–SW and probably formed together during the middle Albian, as synkinematic units onlap the fault scarp. The diapir is interpreted as a reactive diapir in response to middle Albian motion on the Gaztelugatxe fault. The rate of salt rise is estimated to be about 500 m Myr^?1 during this passive stage. During Late Albian, the diapir evolved passively as the Gaztelugatxe fault became inactive. Synkinematic units thinning towards the diapir, major unconformities, slumps and other gravity‐driven deposits demonstrate that most deformation related to diapir growth occurred at the sea floor. Halokinetic sequences composed of alternating breccias and fine‐grained turbidites recorded cyclic episodes of diapir flank destabilization. This work provides insights into drape fold and halokinetic sequence models and offers a new simple method for estimating rates of diapir growth. This method may be useful for outcrop studies where biostratigraphical data are available and for other passive diapirs worldwide.     

The impact of salt on the late Messinian to recent tectonostratigraphic evolution of the Cyprus subduction zone

Messinian evaporites of locally more than 3‐km thickness occupy the subduction zone between Cyprus and Eratosthenes Seamount. Based on a dense grid of seismic reflection profiles, we report on compressional salt tectonics and its impact on the Late Miocene to Quaternary structural evolution of the Cyprus subduction zone. Results show that evaporites have experienced significant post‐Messinian shortening along the plate boundary. Shortening has initiated allochthonous salt advance between Cyprus and Eratosthenes Seamount, representing an excellent example of salt which efficiently escapes subduction and accretion. Further east, between Eratosthenes Seamount and the Hecataeus Rise, evaporites were compressionally inflated without having advanced across post‐Messinian strata. Such differences in the magnitude of salt tectonic shortening may reflect a predominately north–south oriented post‐Messinian convergence direction, raising the possibility of a later coupling between the motion of Cyprus and Anatolia than previously thought. Along the area bordered by Cyprus and Eratosthenes Seamount a prominent step in the seafloor represents the northern boundary of a controversially debated semi‐circular depression. Coinciding with the southern edge of the salt sheet, this bathymetric feature is suggested to have formed as a consequence of compressional salt inflation and seamount‐directed salt advance. Topographic lows on top of highly deformed evaporites are locally filled by up to 700 m of late Messinian sediments. The uppermost 200 m of these sediments were drilled in the course of ODP Leg 160 and interpreted to represent Lago Mare‐type deposits (Robertson, Tectonophysics, 1998d, 298 , 63‐82). Lago Mare deposits are spatially restricted to the western part of the subduction zone, pinching out towards the east whereas presumably continuing into the Herodotus Basin further west. We suggest a sea level control on late Messinian Lago Mare sedimentation, facilitating sediment delivery into basinal areas whereas inhibiting Lago Mare deposition into the desiccated Levant Basin. Locally, early salt deformation is believed to have provided additional accommodation space for Lago Mare sedimentation, resulting in the presently observed minibasin‐like geometry.     

Post‐orogenic thermal history and exhumation of the northern Appalachian Basin: Low‐temperature thermochronologic constraints

Apatite fission‐track (AFT) thermochronology and (U‐Th)/He (AHe) dating, combined with paleothermometers and independent geologic constraints, are used to model the thermal history of Devonian Catskill delta wedge strata. The timing and rates of cooling determines the likely post‐orogenic exhumation history of the northern Appalachian Foreland Basin (NAB) in New York and Pennsylvania. AFT ages generally young from west to east, decreasing from ~185 to 120 Ma. AHe single‐grain ages range from ~188 to 116 Ma. Models show that this part of the Appalachian foreland basin experienced a non‐uniform, multi‐stage cooling history. Cooling rates vary over time, ~1–2 °C/Myr in the Early Jurassic to Early Cretaceous, ~0.15–0.25 °C/Myr from the Early Cretaceous to Late Cenozoic, and ~1–2 °C/Myr beginning in the Miocene. Our results from the Mesozoic are broadly consistent with earlier studies, but with the integration of multiple thermochronometers and multi‐kinetic annealing algorithms in newer inverse thermal modeling programs, we constrain a Late Cenozoic increase in cooling which had been previously enigmatic in eastern U.S. low‐temperature thermochronology datasets. Multi‐stage cooling and exhumation of the NAB is driven by post‐orogenic basin inversion and catchment drainage reorganization, in response to changes in base level due to rifting, plus isostatic and dynamic topographic processes modified by flexure over the long (~200 Myr) post‐orogenic period. This study compliments other regional exhumation data‐sets, while constraining the timing of post‐orogenic cooling and exhumation in the NAB and contributing important insights on the post‐orogenic development and inversion of foreland basins along passive margins.     

Insights in the exhumation history of the NW Zagros from bedrock and detrital apatite fission‐track analysis: evidence for a long‐lived orogeny

We present the first fission‐track (FT) thermochronology results for the NW Zagros Belt (SW Iran) in order to identify denudation episodes that occurred during the protracted Zagros orogeny. Samples were collected from the two main detrital successions of the NW Zagros foreland basin: the Palaeocene–early Eocene Amiran–Kashkan succession and the Miocene Agha Jari and Bakhtyari Formations. In situ bedrock samples were furthermore collected in the Sanandaj‐Sirjan Zone. Only apatite fission‐track (AFT) data have been successfully obtained, including 26 ages and 11 track‐length distributions. Five families of AFT ages have been documented from analyses of in situ bedrock and detrital samples: pre‐middle Jurassic at ～171 and ～225 Ma, early–late Cretaceous at ～91 Ma, Maastrichtian at ～66 Ma, middle–late Eocene at ～38 Ma and Oligocene–early Miocene at ～22 Ma. The most widespread middle–late Eocene cooling phase, around ～38 Ma, is documented by a predominant grain‐age population in Agha Jari sediments and by cooling ages of a granitic boulder sample. AFT ages document at least three cooling/denudation periods linked to major geodynamic events related to the Zagros orogeny, during the late Cretaceous oceanic obduction event, during the middle and late Eocene and during the early Miocene. Both late Cretaceous and early Miocene orogenic processes produced bending of the Arabian plate and concomitant foreland deposition. Between the two major flexural foreland episodes, the middle–late Eocene phase mostly produced a long‐lasting slow‐ or nondepositional episode in the inner part of the foreland basin, whereas deposition and tectonics migrated to the NE along the Sanandaj‐Sirjan domain and its Gaveh Rud fore‐arc basin. As evidenced in this study, the Zagros orogeny was long‐lived and multi‐episodic, implying that the timing of accretion of the different tectonic domains that form the Zagros Mountains requires cautious interpretation.     

Unravelling the multi-stage burial history of the Swiss Molasse Basin: integration of apatite fission track, vitrinite reflectance and biomarker isomerisation analysis

A complex basin evolution was studied using various methods, including thermal constraints based on apatite fission‐track (AFT) analysis, vitrinite reflectance (VR) and biomarker isomerisation, in addition to a detailed analysis of the regional stratigraphic record and of the lithological properties. The study indicates that (1) given the substantial amount of data, the distinction and characterisation of successive stages of heating and burial in the same area are feasible, and (2) the three thermal indicators (AFT, VR and biomarkers) yield internally consistent thermal histories, which supports the validity of the underlying kinetic algorithms and their applicability to natural basins. All data pertaining to burial and thermal evolution were integrated in a basin model, which provides constraints on the thickness of eroded sections and on heat flow over geologic time. Three stages of basin evolution occurred in northern Switzerland. The Permo‐Carboniferous strike–slip basin was characterised by high geothermal gradients (80–100°C km^?1) and maximum temperature up to 160°C. After the erosion of a few hundreds of metres in the Permian, the post‐orogenic, epicontinental Mesozoic basin developed in Central Europe, with subsidence triggered by several stages of rifting. Geothermal gradients in northern Switzerland during Cretaceous burial were relatively high (35–40°C km^?1), and maximum temperature typically reached 75°C (top middle Jurassic) to 100°C (base Mesozoic). At least in the early Cretaceous, a stage of increased heat flow is needed to explain the observed maturity level. After erosion of 600–700 m of Cretaceous and late Jurassic strata during the Paleocene, the wedge‐shaped Molasse Foreland Basin developed. Geothermal gradients were low at this time (≤20°C km^?1). Maximum temperature of Miocene burial exceeded that of Cretaceous burial in proximal parts (<35 km from the Alpine front), but was lower in more distal parts (>45 km). Thus, maximum temperature as well as maximum burial depth ever reached in Mesozoic strata occurred at different times in different regions. Since the Miocene, 750–1050 m were eroded, a process that still continues in the proximal parts of the basin. Current average geothermal gradients in the uppermost 2500 m are elevated (32–47°C km^?1). They are due to a Quaternary increase of heat flow, most probably triggered by limited advective heat transport along Paleozoic faults in the crystalline basement.     

Initiation and growth of salt-based thrust belts on passive margins: results from physical models

Scaled sandbox models simulated primary controls on the kinematics of the early structural evolution of salt‐detached, gravity‐driven thrust belts on passive margins. Models had a neutral‐density, brittle overburden overlying a viscous décollement layer. Deformation created linked extension–translation–shortening systems. The location of initial brittle failure of the overburden was sensitive to perturbations at the base of the salt. Salt pinch‐out determined the seaward limit of the thrust belt. The thrust belts were dominated by pop‐up structures or detachment folds cut by break thrusts. Pop‐ups were separated by flat‐bottomed synclines that were partially overthrust. Above a uniformly dipping basement, thrusts initiated at the salt pinch‐out then consistently broke landward. In contrast, thrust belts above a seaward‐flattening hinged basement nucleated above the hinge and then spread both seaward and landward. The seaward‐dipping taper of these thrust belts was much lower than typical, frictional, Coulomb‐wedge models. Towards the salt pinch‐out, frictional resistance increased, thrusts verged strongly seawards and the dip of the taper reversed as the leading thrust overrode this pinch‐out. We attribute the geometry of these thrust belts to several causes. (1) Low friction of the basal décollement favours near‐symmetric pop‐ups. (2) Mobile salt migrates away from local loads created by overthrusting, which reduces the seaward taper of the thrust belt. (3) In this gravity‐driven system, shortening quickly spreads to form wide thrust belts, in which most of the strain overlapped in time.     

A fossilized Opal A to Opal C/T transformation on the northeast Atlantic margin: support for a significantly elevated Palaeogeothermal gradient during the Neogene?

Rock samples – collected from a recent deep‐water exploration well drilled in the Faeroe‐Shetland Channel, northwest of the UK – confirm that a distinctive high‐amplitude seismic reflector that cross‐cuts the Upper Palaeogene and Neogene succession and covers an area of 10 000 km² is an example of a fossilized Opal A to Opal C/T (Cristobalite/Tridymite) transition. Analysis of these rock fragments tied to an extensive two‐dimensional and three‐dimensional seismic database constrains the time at which the boundary was fossilized and in addition reveals the unusual geometrical characteristics of a relict bottom‐simulating reflector. The diagenetic transformation of biogenic silica (Opal A) to Opal C/T is predominantly temperature‐controlled and requires sediments that contain biogenic silica. The reflector (termed as Horizon E) probably initially represented a biosiliceous ooze or a siltstone that contained a component of biogenic silica that underwent transformation as the diagenetic front migrated upsection during burial. The parallelism it shows with a shallower early Pliocene reflector and its apparent upsection migration during a compressional episode in the basin indicate that it was active during the middle and late Miocene and ceased activity during the early Pliocene when there was between 200 and 400 m of overburden. The present‐day burial depth of the boundary is ca. 700 m and the temperature at the inactive diagenetic front at the well location is 24 °C. Given these temperature and depth constraints, we hypothesize that even if this is an example of a relatively low‐temperature Opal A to Opal C/T transformation, a temporarily elevated geothermal gradient of ca. 60 °C km^?1 would have been required to initiate and arrest upsection migration of the boundary during the middle and late Miocene. Factors such as climatic deterioration and the onset of cold deep‐water circulation are likely to only have had a contributory role in arresting the upward migration of the boundary.