Geology and tectonics of the Themis Regio-Lavinia Planitia-Alpha Regio-Lada Terra area,Venus: Results from Arecibo image data

New radar images obtained from the Arecibo Observatory (resolution 1.5–4.0 km) for portions of the southern hemisphere of Venus show that: the upland of Phoebe Regio contains the southern extension of Devana Chasma, a rift zone extending 4200 km south from Theia Mons and interpreted as a zone of extension; Alpha Regio, the only large region of tessera within the imaged area, is similar to tessera mapped elsewhere on the planet and covers a smaller percentage of the surface than that observed in the northern high latitudes; the upland made of Ushas, Innini and Hathor Montes consists of three distinct volcanic constructs; Themis Regio is mapped as an ovoid chain of radar-bright arcuate single and double ring structures, edifices and bright lineaments. This area is interpreted as a region of mantle upwelling and on the basis of apparent split and separated features, a zone of localized faulting and extension. Linear zones of deformation in Lavinia Planitia are characterized by lineament belts that are often locally elevated, are similar to ridge belts mapped in the northern high latitudes and are interpreted to be characterized mainly by compression; radar-bright lava complexes within Lavinia Planitia are unique to this part of the planet and are interpreted to represent areas of eruption of high volumes of extremely fluid lava; the upland of Lada Terra is bound to the north by a linear deformation zone interpreted as extensional, is characterized by large ovoids and coronae, is interpreted to be associated with an area of mantle upwelling, and is in contrast to the northern high latitude highland of Ishtar Terra. Regions of plains in the southern hemisphere cover about 78%; of the mapped area and are interpreted to be volcanic in origin. Located within the area imaged (10–78 S) are 52 craters interpreted to be of impact origin ranging from 8 to 157 km in diameter. On the basis of an overall crater density of 0.94 craters/10⁶ km², it is determined that the age of this part of the Venus surface is similar to the 0.3 to 1.0 billion year age calculated for the equatorial region and northern high latitudes. The geologic characteristics of the portion of the Venus southern hemisphere imaged by Arecibo are generally similar to those mapped elsewhere on the planet. This part of the planet is characterized by widespread volcanic plains, large volcanic edifices, and zones of linear belt deformation. The southern hemisphere of Venus differs from northern high latitudes in that tessera makes up only a small percentage of the surface area and the ovoid chain in Themis Regio is unique to this part of the planet. On the basis of the analysis presented here, the southern hemisphere of Venus is interpreted to be characterized by regions of mantle upwelling on a variety of scales (ovoids, region made up of Ushas, Innini and Hathor Montes), upwelling and extension (Themis Regio) and localized compression (lineament belts in Lavinia Planitia).     

History of tectonic deformation in the interior plains of the Caloris basin,mercury

Analysis of images from the Messenger MDIS narrow angle camera imply that at least part of the radial graben of the Pantheon Fossae structure, and probably the structure as a whole, predate the deformation that led to circumferential ridges on the Caloris interior plains. This follows from structural analysis and comparison with similar geological relationships on Venus and the Moon, where graben are known to both postdate and predate ridges. Observations suggest that the Pantheon Fossae radial graben (extension) formed first, pre-dating observed circumferential graben (also extension), with ridges (compression) formed in between. This scenario puts constraints on the models for the deformation of the Caloris basin and its vicinity. Our observations and analysis are consistent with Pantheon Fossae having formed in a similar manner to Venusian astra/novae, where radial dikes that propagate away from a magmatic center led to graben formation. Our results also have implications for the length of time between the emplacement of the basin volcanic fill and the onset of the compressional stresss regime that led to ridge-formation. If the Pantheon Fossae structure formed before the emplacement of ridges, as we suggest, this means that compressional stresses took some time to develop sufficiently to deform the volcanic plains. Since the Caloris interior plains had to have been already in place when Pantheon Fossae formed, and since these plains represented a significant load to the underlying lithosphere, it is striking that compression took some time to develop. These observations may provide new information about the rigidity of the basin-filling material and will help constrain models for the mechanisms and timing of events within and around the Caloris basin.     

Beta Regio, Venus: Evidence for uplift, rifting, and volcanism due to a mantle plume

Geophysical data have led to the interpretation that Beta Regio, a 2000×25000 km wide topographic rise with associated rifting and volcanism, formed due to the rise of a hot mantle diapir interpreted to be caused by a mantle plume. We have tested this hypothesis through detailed geologic mapping of the V-17 quadrangle, which includes a significant part of the Beta Regio rise, and reconnaissance mapping of the remaining parts of this region. Our analysis documents signatures of an early stage of uplift in the formation of the Agrona Linea fracture belts before the emplacement of regional plains and their deformation by wrinkle ridging. We see evidence that the Theia rift-associated volcanism occurred during the first part of post-regional-plains time and cannot exclude that it continued into later time. We also see evidence that Devana Chasma rifting was active during the first and the second parts of post-regional-plains time. These data are consistent with uplift, rifting and volcanism associated with a mantle diapir. Geophysical modeling shows that diapiric upwelling may continue at the present time. Together these data suggest that the duration of mantle diapir activity was as long as several hundred million years. The regional plains north of Beta rise and the area east and west of it were little affected by the Beta-forming plume, but the broader area (at least 4000 km across), whose center-northern part includes Beta Regio, could have experienced earlier uplift as morphologically recorded in formation of tessera transitional terrain.     

Gravity studies of Aphrodite Terra on Venus

Aphrodite Terra is the largest highland area on Venus of the size of Africa. It is traversed by the Aphrodite-Beta belt of troughs with a length of 21 000 km. There are two other large belts of troughs on Venus: Themis-Atla, 14 000 km long, and Beta-Phoebe, 8000 km long. In this paper, four gravity profiles across Aphrodite Terra are studied and compared with the morphology.Western Aphrodite and Niobe Planitia to the north seem to be in isostatic equilibrium under the assumption of Airy compensation with a mean crustal thickness of T = 50 km. The graben area in the middle part of Aphrodite Terra shows negative isostatic gravity anomalies indicating deficit masses. The adjacent Atla Regio to the east is regionally Airy compensated with T = 50 km, and the mountains Nokomis, Maat and Ozza Montes are locally undercompensated, i.e. they are associated with surplus masses in the depth. Ulfrun Regio, a hilly terrain just east of Atla Regio is Airy compensated with T = 30 km. These results give a mean crustal thickness around 50 km for Aphrodite Terra. The isostatic disturbed zones in the middle of Aphrodite (grabens) and Atla Regio as well as the undercompensated Beta Regio have been associated with recent volcanism from the observation of the concentrations of electrical discharges in these areas. Atla and Beta Regiones are both located at intersections of the systems of troughs described above.Contribution No. 308, Institut für Geophysik der Universität Kiel, F.R.G.     

Structural evolution of Lavinia Planitia, Venus: Implications for the tectonics of the lowland plains

This work shows the results of a detailed structural analysis of the deformation belts of Lavinia Planitia. Ridge belts and graben and groove belts can be observed at the studied area, while wrinkle ridges and large individual grooves predominate in the smooth plains. Transcurrent components of displacement are commonly observed, and transpression and transtension zones are the rule rather than the exception at most of the studied belts. Along-strike azimuth changes of deformation belts are accommodated by internal variations in the predominance of contractional, transcurrent or extensional structures. The material of the surrounding plains embays most of these deformation belts. The kinematic analysis of this complex network of tectonic structures suggests a broadly synchronous activity of contractional, transcurrent and extensional structures. The maximum horizontal shortening axis determined in this work describes a steady, semi-circular pattern centered at Alpha Regio. This deformation continued, although with subdued activity, after embayment of the deformation belts by the material of the plains. Future study of the tectonic evolution of the lowland plains should take into account the importance of the coeval history of neighboring uplands and lowlands.     

Global stratigraphy of Venus: analysis of a random

The age relations between 36 impact craters with dark paraboloids and other geologic units and structures at these localities have been studied through photogeologic analysis of Magellan SAR images of the surface of Venus. Geologic settings in all 36 sites, about 1000 × 1000 km each, could be characterized using only 10 different terrain units and six types of structures. These units and structures form a major stratigraphic and geologic sequence (from oldest to youngest): 1) tessera terrain; 2) densely fractured terrains associated with coronae and in the form of remnants among plains; 3) fractured and ridged plains and ridge belts; 4) plains with wrinkle ridges; 5) ridges associated with coronae annulae and ridges of arachnoid annulae which are contemporary with wrinkle ridges of the ridged plains; 6) smooth and lobate plains; 7) fractures of coronae annulae, and fractures not related to coronae annulae, which disrupt ridged and smooth plains; 8) rift-associated fractures; 9) craters with associated dark paraboloids, which represent the youngest 10% of the Venus impact crater population (Campbellet al., 1992), and are on top of all volcanic and tectonic units except the youngest episodes of rift-associated fracturing and volcanism; surficial streaks and patches are approximately contemporary with dark-paraboloid craters.Mapping of such units and structures in 36 randomly distributed large regions (each 10⁶ km²) shows evidence for a distinctive regional and global stratigraphic and geologic sequence. On the basis of this sequence we have developed a model that illustrates several major themes in the history of Venus. Most of the history of Venus (that of its first 80% or so) is not preserved in the surface geomorphological record. The major deformation associated with tessera formation in the period sometime between 0.5–1.0 b.y. ago (Ivanov and Basilevsky, 1993) is the earliest event detected. In the terminal stages of tessera formation, extensive parallel linear graben swarms representing a change in the style of deformation from shortening to extension were formed on the tessera and on some volcanic plains that were emplaced just after (and perhaps also during the latter stages of the major compressional phase of tessera emplacement. Our stratigraphic analyses suggest that following tessera formation, extensive volcanic flooding resurfaced at least 85% of the planet in the form of the presently-ridged and fractured plains. Several lines of evidence favor a high flux in the post-tessera period but we have no independent evidence for the absolute duration of ridged plains emplacement. During this time, the net state of stress in the lithosphere apparently changed from extensional to compressional, first in the form of extensive ridge belt development, followed by the formation of extensive wrinkle ridges on the flow units. Subsequently, there occurred local emplacement of smooth and lobate plains units which are presently essentially undeformed. The major events in the latest 10% of the presently preserved history of Venus (less than 50 m.y. ago) are continued rifting and some associated volcanism, and the redistribution of eolian material largely derived from impact crater deposits.Detailed geologic mapping and stratigraphic synthesis are necessary to test this sequence and to address many of the outstanding problems raised by this analysis. For example, we are uncertain whether this stratigraphic sequence corresponds to geologic events which were generally synchronous in all the sites and all around the planet, or whether the sequence is simply a typical sequence of events which occurred in different places at different times. In addition, it is currently unknown whether the present state represents a normal consequence of the general thermal evolution of Venus (and is thus representative of the level of geological activity predicted for the future), or if Venus, has been characterized by a sequence of periodic global changes in the composition and thermal state of its crust and upper mantle (in which case, Venus could in the future return to levels of deformation and resurfacing typical of the period of tessera formation).     

Geology and tectonics of Beta Regio,Guinevere Planitia,Sedna Planitia,and Western Eistla Regio,Venus: Results from Arecibo image data

New radar images (resolution 1.5–2.0 km) obtained from the Arecibo Observatory are used to assess the geology of a portion of the equatorial region of Venus (1 S to 45 N and from 270 eastward to 30). Nine geologic units are mapped on the basis of their radar characteristics and their distribution and correspondences with topography are examined. Plains are the most abundant unit, make up 80%; of the area imaged, and are divided into bright, dark, and mottled. Mottled plains contain abundant lava flows and domes suggesting that volcanism forming plains is a significant process in the equatorial region of Venus. Tesserae are found primarily on Beta Regio and its eastern flank and are interpreted to be locally stratigraphically older units, predating episodes of faulting and plains formation. Isolated regions of tesserae concentrated to the north of Western Eistla Regio are interpreted to predate the formation of plains in this area. The volcanoes Sif Mons, Gula Mons, Sappho, Theia Mons, and Rhea Mons, are found exclusively in highland regions and their deposits are interpreted as contributing only a small percentage to the overall volume of the regional topography. The northern 15 of the image data overlap with Venera 15/16 images making it possible to examine the characteristics of geologic units mapped under various illumination directions and incidence angles. Surface panoramas and geochemical data obtained from Venera landers provide ground truth for map units, evidence that plains are made up of basaltic lava flows, and that linear deformation zones contain abundant blocks and cobbles. On the basis of spatial and temporal relationships between geologic units, the highlands of Beta Regio and Western Eistla Regio are interpreted to have formed in association with areas of mantle upwelling which uplift plains, cause rifting, and in the case of Beta Regio, disrupt a large region of tessera. Zones of linear belt deformation in Beta Regio and Western Eistla Regio are interpreted to be extensional and indicate that at least limited extension has occurred in both regions. The images reveal for the first time that southern Devana Chasma is a region of overlapping rift valleys separated by a distance of 600 km. Linear deformation zones in Guinevere Planitia, separating Beta Regio and Eistla Regio, converge at a region of ovoids forming a discontinuous zone of disruption and completes an equatorial encompassing network of highlands and tectonic features. The similarity between ovoids and coronae suggests a mechanism of formation associated with hotspots or mantle plumes. Analysis of the distribution and density of impact craters suggests a surface age for this part of the planet similar to or slightly less than that determined for the northern high latitudes from Venera 15/16 data (0.3 to 1.5 by) and comparable to that calculated for the southern hemisphere.     

Tectonics of Venus: A review

The article presents a new tectonic scheme of Venus and gives the following interpretation of the planet's main structural units: (1) plains — areas of flood volcanism over stretched crust; (2) dome-like uplifts — areas of uplifting and volcanic activity above the mantle hot-spots; (3) coronae —former dome-like uplifts, partially subsided and diffused by gravity; (4) ridge belts — fold zones; (5) tesserae — fragments of ductile compression and shortening of crust; (6) supercoronae — coronae formed in the course of further evolution and relaxation of Beta-type uplifts. Ishtar Terra is considered to be a fragment of an ancient tessera paleocontinent, on the edge of which the Lakshmi supercorona is superimposed. Aphrodite Terra is considered as a belt of mantle hot-spot structures (dome-like uplifts, coronae, supercoronae, volcanoes, rifts).Three types of planetary belts have been distinguished on Venus: uplifted 'weakened' belts with an abundance of mantle hot-spot structures; a northern fan of ridge belts; and belts of low basalt plains. The center of the planetary system of uplifted weakened belts is situated in Atla Regio.The present tectonic structure of Venus is inferred to have formed during two stages of evolution characterized by different tectonic regimes. Stage I is a regime of soft ductile plates (formation of tessera uplifts and volcanic plains). Stage II is a formation of 'weakened' uplifted planetary belts, various tectonic regimes of mantle hot-spots, and plains-forming volcanism.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci. Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Formation and evolution of Lakshmi Planum, Venus: Assessment of models using observations from geological mapping

Detailed geological analysis of the Lakshmi Planum region of western Ishtar Terra results in the establishment of the sequence of major events during the formation and evolution of western Ishtar Terra, an important and somewhat unique area on Venus characterized by a raised volcanic plateau surrounded by distinctive folded mountain belts, such as Maxwell Montes. These mapping results and the stratigraphic and structural relationships provide a basis for addressing the complicated problem of Lakshmi Planum formation and for testing the suite of models previously proposed to explain this structure. We review and classify previous models of formation for western Ishtar Terra into “downwelling” models (generally involving convergence and underthrusting) and “upwelling” models (generally involving plume-like upwelling and divergence). The interpreted nature of units and the sequence of events derived from geological mapping are in contrast to the predictions of the divergent models. The major contradictions are as follows: (1) The very likely presence of an ancient (craton-like) tessera massif in the core of Lakshmi, which is inconsistent with the model of formation of Lakshmi due to rise and collapse of a mantle diapir; (2) The absence of rift zones in the interior of Lakshmi that are predicted by the divergent models; (3) The apparent migration of volcanic activity toward the center of Lakshmi, whereas divergent models predict the opposite trend; (4) The abrupt cessation of ridges of the mountain ranges at the edge of Lakshmi Planum and propagation of these ridges over hundreds of kilometers outside Lakshmi; the divergent models predict the opposite progression in the development of major contractional features. In contrast, convergent models of formation and evolution of Lakshmi Planum appear to be more consistent with the observations and explain this structure by collision and underthrusting/subduction of lower-lying plains with the elevated and rigid block of tessera. These models are capable of explaining formation of the major features of western Ishtar (for example, the mountain belts), the sequences of events, and principal volcanic and tectonic trends during the evolution of Lakshmi. To explain the pronounced north-south asymmetry of Lakshmi these models need to consider the likelihood that the major focal points of collision are at the north and north-west margins of the plateau. We note that pure downwelling models, however, face three important difficulties: (1) The possibly unrealistically long time span that appears to be required to produce the major features of Lakshmi; (2) The strong north-south asymmetry of the Planum; the pure downwelling models predict the formation of a more symmetrical structure; and (3) The absence of radial contractional structures (arches and ridges) in the interior of Lakshmi that would represent the predictions of the downwelling models.     

Morphology of the Tessera Terrain on Venus: Implications for the Composition of Tessera Material

The main goal of this paper is to estimate the possible composition of the tessera material on the basis of an interpretation of the morphology of the tessera precursor terrain. The results of detailed photogeologic analysis of tessera are presented. For the study, 56 randomly chosen areas that characterize the surface of large and small tessera massifs were selected. Each area represents a portion of the F-MAP photomosaics acquired at a 75 m/px resolution. The results of this study show that the tessera precursor terrain appears everywhere as plains. In its morphology, these plains are similar to the plains outside the tessera massifs. An overview of all possible mechanisms of the formation of plains on Venus and comparison of these mechanisms with the data of the chemical measurements on the surface of Venus suggests that the Venusian plains were formed as a result of the emplacement of low-viscous basaltic lava. This rather well-known conclusion is made here for the first time in order to estimate the possible composition of the tessera material. Thus, it is likely that the composition of the tessera precursor plains is similar to the composition of the basaltic plains on Venus. The products of posttessera volcanism in the form of morphologically smooth plains commonly occur within the tessera terrains. Morphologically, these plains are similar to the regional Venusian plains, which strongly suggests a basaltic composition of such plains. There are only two volcanic flows within the whole tessera terrain on Venus whose morphology permits one to interpret them as a manifestation of nonbasaltic, more siliceous volcanism. This means that the material of the regional tessera-bearing highlands very rarely responded to the thermal influence from below by siliceous volcanism. If some hypothetical granitelike material makes up the main portion of the tessera highlands, this material remains hidden. Therefore, the hypothesis of the granitelike bulk composition of the tessera highlands has little support from observations. At the current stage of the study of Venus, a model in which tessera highlands are composed predominantly of basalt with a possible, but insignificant component of more siliceous material is thought to be correct.     

Geologic interpretation of the near-infrared images of the surface taken by the Venus Monitoring Camera,Venus Express

We analyze night-time near-infrared (NIR) thermal emission images of the Venus surface obtained with the 1-μm channel of the Venus Monitoring Camera onboard Venus Express. Comparison with the results of the Magellan radar survey and the model NIR images of the Beta-Phoebe region show that the night-time VMC images provide reliable information on spatial variations of the NIR surface emission. In this paper we consider if tessera terrain has the different NIR emissivity (and thus mineralogic composition) in comparison to the surrounding basaltic plains. This is done through the study of an area SW of Beta Regio where there is a massif of tessera terrain, Chimon-mana Tessera, surrounded by supposedly basaltic plains. Our analysis showed that 1-μm emissivity of tessera surface material is by 15–35% lower than that of relatively fresh supposedly basaltic lavas of plains and volcanic edifices. This is consistent with hypothesis that the tessera material is not basaltic, maybe felsic, that is in agreement with the results of analyses of VEX VIRTIS and Galileo NIMS data. If the felsic nature of venusian tesserae will be confirmed in further studies this may have important implications on geochemical environments in early history of Venus. We have found that the surface materials of plains in the study area are very variegated in their 1-μm emissivity, which probably reflects variability of degree of their chemical weathering. We have also found a possible decrease of the calculated emissivity at the top of Tuulikki Mons volcano which, if real, may be due to different (more felsic?) composition of volcanic products on the volcano summit.     

Radiating graben-fissure systems in the Ulfrun Regio area, Venus

Radiating graben-fissure systems are common on Venus. Most are thought to be underlain by mafic dykes, fed by centrally-located magmatic centres. From previous work it has been shown that these magmatic plumbing systems can extend out up to 2000 km or more and that interaction between neighbouring systems can provide insight into the relative chronology of their magmatic centres. Systematic mapping of graben-fissure systems has potential as a tool for regional magmatic chronology and correlation on Venus.This methodology is applied to the Ulfrun Regio area (200-240°E, 0-25°N) where we mapped 47,000 graben and fissures. From these, 66 radiating systems comprised of 13,000 individual graben and fissures, and having radii of up to 2000 km have been identified, and are interpreted to be underlain by dyke swarms focussed on magmatic centres. Cross-cutting relationships among these systems and with the Hecate Chasma rift zone have been examined to provide a relative chronology for the magmatic centres. Two trends emerged: (a) an apparent younging from the southwest to northeast of the study area and (b) a cluster of older ages in the southwest, linked to the Atla Regio mantle plume.     

Volcanic and structural history of the rocks exposed at Pickering Crater (Daedalia Planum, Mars)

In the western hemisphere of Mars Amazonian volcanism from Arsia Mons produced the smooth surfaces of Daedalia Planum and masks older rocks. Close to the southern termination of Daedalia Planum basement rocks are exposed in which are preserved craters that escaped or were only partially filled by this most recent volcanism. Pickering Crater is an approximately 130 km diameter crater. The youngest lavas flowed into this crater from Daedalia Planum by way of a NW rim breach, covering its western part. East of a well-defined flow front an older lava sequence with a distinctive platy surface and derived from a more proximal unestablished source to the northeast is exposed. Several units are identified within this sequence on the basis of surface texture, which is more subdued in progressively older rocks. Only local mapping of the flow front boundaries of these units is possible because of incomplete coverage by high resolution imagery. During emplacement of the older lavas a NE-SW striking en echelon graben system and parallel smaller troughs and dikes formed under inferred regional NW-SE extension. A much earlier strike-slip regime pre-dating the lavas exposed in the crater floor is postulated, based on the highly fretted nature of the rim of Pickering Crater and an elongated smaller crater to its northeast, approximately 40 km long in the NE-SW direction. The rims of these craters contrast with that of a smoother rimmed impact crater in the southeast that was excavated subsequent to strike-slip deformation but prior to the emplacement of platy surfaced lavas.     

Assemblages of geologic/morphologic units in the northern hemisphere of Venus

The geologic/morphologic map of the northern mid-to-high latitudes of Venus prepared by a Soviet science team on the basis of Venera 15/16 mission radar image coverage is analyzed and used to define six discrete assemblages of geologic/morphologic units that have well-defined geographic distributions. These assemblages have distinctive and differing geological and tectonic expressions and include: Plains Assemblage - which is dominated by lowland smooth plains and lowland rolling plains interpreted to be of volcanic origin, and a high concentration of small volcanic domes; Plains-Corona Assemblage - which is dominated by lowland smooth plains and lowland rolling plains interpreted to be of volcanic origin, at least ten coronae structures concentrated in the northern half of the region, and at least five large volcanoes, generally concentrated in the southern and western half of the region; Plains-Ridge Belt Assemblage - which is dominated by lowland smooth plains and lesser amounts of lowland rolling plains, major occurrences of ridge belts in a distinctive fan-shaped pattern, and very minor and patchy occurrences of tessera; Plains-Corona-Tessera Assemblage - which is dominated by approximately equal amounts of lowland smooth plains and lowland rolling plains, at least five coronae concentrated in the northern part of the region, a small number of large volcanoes, also in the northern part of the region, and numerous small patches of tesserae scattered throughout, and the highest abundance of small volcanic domes observed in the northern hemisphere; Tessera-Ridge Belt Assemblage — which is dominated by a few large areas (Fortuna, Laima, Tellus) and several smaller areas (Dekla, Meni) of tesserae, ridge belts generally arrayed in an angular and often orthogonal pattern different from the fan-shaped pattern of the Plains-Ridge Belt Assemblage, lowland rolling plains and lesser amounts of lowland smooth plains, and an upland rise (Bell Regio); Tessera-Mountain Belt Assemblage - which is centered on the two volcanoes Colette and Sacajawea in Lakshmi Planum, and characterized by the peripheral mountain belt/tessera pairs, with the tessera on the outboard side: Danu/Clotho (S), Akna/Atropos (W), Freyja/ltzpapalotl (N), and Maxwell/Fortuna (E).The distribution and characteristics of assemblages demonstrate that vertical and horizontal tectonic forces are operating on the crust and lithosphere of Venus in different ways in specific localized areas. Alternative models are outlined for the origin of each assemblage and the relationship between assemblages, and important unresolved questions are identified. A key to the further understanding of these assemblages is the origin of ridge belts and tessera terrain.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Morphologic and gravimetric investigations of Bell and Eisila Regiones on Venus

Bell Regio is a highland fragment south of Ishtar Terra, extending 1300 km in N-S direction and 900 km in E-W direction. South of this region Eisila Regio is located with an E-W extension of 8000 km and a width of 2000 km. Bell Regio consists of two large massifs: a northern massif with maximum altitudes of 2.5 to 3.0 km above the 6051 km datum and with a semi-corona (other coronae on Venus are associated with volcanic-tectonic processes) and a southern massif with a maximum of 4 to 4.5 km above the datum. The possible shield volcano Tepev Mons of 250 km in diameter is superimposed on the southern massif. It shows a radar dark crater of 40 km diameter on its eastern flank, a crater-like feature of 15 km diameter on the top and a radar bright area extending from the dark crater across the summit. South of Tepev Mons are several volcanic structures with summit depressions. The crest of Bell Regio exhibits a N-S extending fossa system. The whole fresh appearing plain-like area has been classified as rather young compared to other units. Gravity data show a maximum of 33 mGal at Bell Regio and 35 mGal at eastern Eisila Regio. The basins north and south of the highland fragments are associated with gravity lows.Density models have been calculated along the gravity profile Rev. 163 of Pioneer Venus Orbiter across Bell and Eisila Regiones assuming Airy isostatic compensation of the topography and considering several boundary conditions (e.g. mean crustal thickness T<- 100 km). There are two groups of density models in the case of Airy compensation. In the first group global total compensation is assumed along the profile and regional partial compensation for Bell and Eisila Regiones. This solution gives a range of possible models with 10 km <- T <- 100 km and a partial compensation for Bell and Eisila Regiones between 12% and 55%. Thus these two highland fragments show subsurface surplus masses.The second group of models considers for the whole profile total compensation with a global T <- 100 km and a regional very large depth of compensation for Bell and Eisila Regiones, i.e. T > 100 km.The highland of Beta Regio has, like Bell Regio, a N-S rifting system, volcanic structures, a fresh appearing plain-like surface and either deep-seating compensating masses or near surface surplus masses. Bell can be considered as little sister of Beta. The geological and geophysical results imply a volcanic-tectonic uplift over a hot spot. The conditions of Atla Regio in eastern Aphrodite Terra are similar. Thus the existence of volcanic-tectonic uplifts support the important role of hot spot volcanism on Venus.Contribution Nr. 343, Institut für Geophysik der Universität Kiel, F.R.G.     

Eminescu impact structure: Insight into the transition from complex crater to peak-ring basin on Mercury

Peak-ring basins represent an impact-crater morphology that is transitional between complex craters with central peaks and large multi-ring basins. Therefore, they can provide insight into the scale dependence of the impact process. Here the transition with increasing crater diameter from complex craters to peak-ring basins on Mercury is assessed through a detailed analysis of Eminescu, a geologically recent and well-preserved peak-ring basin. Eminescu has a diameter (∼125 km) close to the minimum for such crater forms and is thus representative of the transition. Impact crater size-frequency distributions and faint rays indicate that Eminescu is Kuiperian in age, geologically younger than most other basins on Mercury. Geologic mapping of basin interior units indicates a distinction between smooth plains and peak-ring units. Our mapping and crater retention ages favor plains formation by impact melt rather than post-impact volcanism, but a volcanic origin for the plains cannot be excluded if the time interval between basin formation and volcanic emplacement was less than the uncertainty in relative ages. The high-albedo peak ring of Eminescu is composed of bright crater-floor deposits (BCFDs, a distinct crustal unit seen elsewhere on Mercury) exposed by the impact. We use our observations to assess predictions of peak-ring formation models. We interpret the characteristics of Eminescu as consistent with basin formation models in which a melt cavity forms during the impact formation of craters at the transition to peak ring morphologies. We suggest that the smooth plains were emplaced via impact melt expulsion from the central melt cavity during uplift of a peak ring composed of BCFD-type material. In this scenario the ringed cluster of peaks resulted from the early development of the melt cavity, which modified the central uplift zone.     

Buffered and unbuffered dike emplacement on Earth and Venus: implications for magma reservoir size,depth, and rate of magma replenishment

Models of the emplacement of lateral dikes from magma chambers under constant (buffered) driving pressure conditions and declining (unbuffered) driving pressure conditions indicate that the two pressure scenarios lead to distinctly different styles of dike emplacement. In the unbuffered case, the lengths and widths of laterally emplaced dikes will be severely limited and the dike lengths will be highly dependent on chamber size; this dependence suggests that average dike length can be used to infer the dimensions of the source magma reservoir. Probable examples on Earth of the unbuffered case are flanking rift zones on shield volcanoes such as the Hawaiian Kilauea East Rift Zone, in which the dikes of average widths of less than a meter extend for several km from the central part of the edifice. In contrast, emplacement of lateral dikes in the constant driving pressure (buffered) case can produce dikes which have sizes and widths which are very large, and are independent of chamber size. For relatively shallow magma chambers, buffered emplacement is expected to produce graben of relatively fixed length which are associated with eruptive fissures and long, large volume lava flows. A decline in magma supply rate and loss of pressure buffering during the later stages of such eruptions may give rise to caldera formation/collapse events. Deeper dikes are not likely to erupt but will produce surface graben of variable length. Therefore, edifices or dike swarms which show an extremely wide variation in fracture or dike lengths are likely to have been formed in buffered conditions. On Earth, the characteristics of many mafic-dike swarms suggest that they were emplaced in buffered conditions (e.g., the Mackenzie dike swarm in Canada and some dikes within the Scottish Tertiary). On Venus, the distinctive radial fractures and graben surrounding circular to oval features and edifices on many size scales and extending for hundreds to over a thousand km are candidates for dike emplacement in buffered conditions.     

Geologic setting of Boulder 1, Station 2, Apollo 17 landing site

Boulder 1 at Station 2 is one of three boulders sampled by Apollo 17 at the base of the South Massif, which rises 2.3 km above the floor of a linear valley interpreted as a graben formed by deformation related to the southern Serenitatis impact. The boulders probably rolled from the upper part of the massif after emplacement of the light mantle. Orbital gravity data and photogeologic reinterpretation suggest that the Apollo 17 area is located approximately on the third ring of the southern Serenitatis basin, approximately 1.25 times larger than the analogous but fresher Orientale basin structure. The massif exposures are interpreted to represent the upper part of thick ejecta deposited by the southern Serenitatis impact near the rim of the transient cavity. Basin ring structure and the radial grabens that give the massifs definition were imposed on this ejecta at a slightly later stage in the basin-forming process. There is no clear-cut compositional, textural, or photogeologic evidence that Imbrium ejecta was collected at the Apollo 17 site.     

The evolution of the lunar Nectaris multiring basin

Nectaris is an 820-km-diameter, multiring impact basin located on the near side of the Moon. The transient cavity is estimated to have been less than 90 km in depth and materials were excavated from a depth of less than 30 km. About 2 km thickness of impact melt is believed to line the cavity center. The impact event probably took place at about 3.98 ± 0.03 × 10⁹ years ago. Nectaris ejecta forms a substantial proportion of the surface materials at the Apollo 16 site. Inter-ring plains deposits were deposited after the formation of the Nectaris basin. The most persuasive origin for the smooth plains is one of extrusives overlain by a thin veneer of ejecta. Basaltic fragments within Apollo 16 samples are believed to have been largely derived from Nectaris. A titanium-rich Apollo 16 mare basalt fragment has an age of 3.79 ± 0.05 × 10⁹ years but, although some relatively titanium-enriched basalts occur in southern Nectaris, titanium-rich basalts are nowhere seen at the surface of the mare. The earliest recognized eruptives appear to be low-titanium (perhaps VLT) basalts found as pyroclastic materials on Daguerre and in the Gaudibert region. The majority of the surface basalts are of intermediate composition (possibly similar to Apollo 12 basalts) and have an age of approximately 3.6 × 10⁹ years. The basalt fill is estimated to have a minimum thickness of 3 km. Flood-style eruptions appear to have been the main form of extrusion. Mare ridges exhibit a strong north-south preferential alignment and appear to postdate basalt emplacement. The lack of basin-related graben in Nectaris is consistent with a thick lithosphere. The basin ring structure is best preserved in the southwest and least preserved in the northeast. This is believed to result from horizontal variations in the crust and lithosphere thicknesses and from the influence of the preexisting Fecunditatis and Tranquillitatis basins; the ring structure is best preserved where the lithosphere was thickest. Floor-fractured craters within Nectaris are intimately associated with the basalt fill both in terms of age and location. Theophilus ejecta, small craters, and Tycho rays, combined with subsidence and mare ridge development, were the only modifying influences on Nectaris since the termination of basalt eruptions.     

Endogenous and nonimpact origin of the Arkenu circular structures (al‐Kufrah basin—SE Libya)

Abstract– The twin Arkenu circular structures (ACS), located in the al‐Kufrah basin in southeastern Libya, were previously considered as double impact craters (the “Arkenu craters”). The ACS consist of a NE (Arkenu 1) and a SW structure (Arkenu 2), with approximate diameters of about 10 km. They are characterized by two shallow depressions surrounded by concentric circular ridges and silica‐impregnated sedimentary dikes cut by local faults. Our field, petrographic, and textural observations exclude that the ACS have an impact origin. In fact, we did not observe any evidence of shock metamorphism, such as planar deformation features in the quartz grains of the collected samples, and the previously reported “shatter cones” are wind‐erosion features in sandstones (ventifacts). Conversely, the ACS should be regarded as a “paired” intrusion of porphyritic stocks of syenitic composition that inject the Nubia Formation and form a rather simple and eroded ring dike complex. Stock emplacement was followed by hydrothermal activity that involved the deposition of massive magnetite–hematite horizons (typical of iron oxide copper‐gold deposits). Their origin was nearly coeval with the development of silicified dikes in the surroundings. Plugs of tephritic‐phonolitic rocks and lamprophyres (monchiquites) inject the Nubian sandstone along conjugate fracture zones, trending NNW–SSE and NE–SW, that crosscut the structural axis of the basin.