Geochemistry of the thermal springs and fumaroles of Basse-Terre Island,Guadeloupe, Lesser Antilles

 The purpose of this work was to study jointly the volcanic-hydrothermal system of the high-risk volcano La Soufrière, in the southern part of Basse-Terre, and the geothermal area of Bouillante, on its western coast, to derive an all-embracing and coherent conceptual geochemical model that provides the necessary basis for adequate volcanic surveillance and further geothermal exploration. The active andesitic dome of La Soufrière has erupted eight times since 1660, most recently in 1976–1977. All these historic eruptions have been phreatic. High-salinity, Na–Cl geothermal liquids circulate in the Bouillante geothermal reservoir, at temperatures close to 250  °C. These Na–Cl solutions rise toward the surface, undergo boiling and mixing with groundwater and/or seawater, and feed most Na–Cl thermal springs in the central Bouillante area. The Na–Cl thermal springs are surrounded by Na–HCO₃ thermal springs and by the Na–Cl thermal spring of Anse à la Barque (a groundwater slightly mixed with seawater), which are all heated through conductive transfer. The two main fumarolic fields of La Soufrière area discharge vapors formed through boiling of hydrothermal aqueous solutions at temperatures of 190–215  °C below the "Ty" fault area and close to 260  °C below the dome summit. The boiling liquid producing the vapors of the Ty fault area has δD and δ¹⁸O values relatively similar to those of the Na–Cl liquids of the Bouillante geothermal reservoir, whereas the liquid originating the vapors of the summit fumaroles is strongly enriched in ¹⁸O, due to input of magmatic fluids from below. This process is also responsible for the paucity of CH₄ in the fumaroles. The thermal features around La Soufrière dome include: (a) Ca–SO₄ springs, produced through absorption of hydrothermal vapors in shallow groundwaters; (b) conductively heated, Ca–Na–HCO₃ springs; and (c) two Ca–Na–Cl springs produced through mixing of shallow Ca–SO₄ waters and deep Na–Cl hydrothermal liquids. The geographical distribution of the different thermal features of La Soufrière area indicates the presence of: (a) a central zone dominated by the ascent of steam, which either discharges at the surface in the fumarolic fields or is absorbed in shallow groundwaters; and (b) an outer zone, where the shallow groundwaters are heated through conduction or addition of Na–Cl liquids coming from hydrothermal aquifer(s). Received: 9 November 1998 / Accepted: 15 July 1999     

Chemical and isotopic investigation of warm springs associated with normal faults in Utah

Thermal springs associated with normal faults in Utah have been analyzed for major cations and anions, and oxygen and hydrogen isotopes. Springs with measured temperatures averaging greater than 40°C are characterized by Na + K- and SO₄ + Cl-rich waters containing 10³ to 10⁴ mg/l of dissolved solids. Lower temperature springs, averaging less than 40°C, are more enriched in Ca + Mg relative to Na + K. Chemical variations monitored through time in selected thermal springs are probably produced by mixing with non-thermal waters. During the summer months at times of maximum flow, selected hot springs exhibit their highest temperatures and maximum enrichments in most chemical constituents.Cation ratios and silica concentrations remain relatively constant through time for selected Utah thermal springs assuring the applicability of the geothermometer calculations regardless of the time of year. Geothermometer calculations utilizing either the quartz (no steam loss), chalcedony or Mg-corrected Na/K/Ca methods indicate that most thermal springs in Utah associated with normal faults have subsurface temperatures in the range of 25 to less than 120°C. This temperature range suggests fluid circulation is restricted to depths less than about three kilometers assuming an average thermal gradient of about 40°C/km.Thermodynamic calculations suggest that most thermal springs are oversaturated with respect to calcite, quartz, pyrophyllite, (Fe, Mg)-montmorillonite, microcline and hematite, and undersaturated with respect to anhydrite, gypsum, fluorite and anorthite. Chalcedony and cristobalite appear to be the only phases consistently at or near saturation in most waters. Theoretical evaluation of mixing on mineral saturation trends indicates that anhydrite and calcite become increasingly more undersaturated as cold, dilute groundwater mixes with a hot (150°C), NaCl-rich fluid. The evolution of these thermal waters issuing from faults appears to be one involving the dissolution of silicates such as feldspars and micas by CO₂-enriched groundwaters that become more reactive with increasing temperature and/or time. Solution compositions plotted on mineral equilibrium diagrams trend from product phases such as kaolinite or montmorillonite toward reactant phases dominated by alkali feldspars.Isotopic compositions indicate that these springs are of local surface origin, either meteoric (low TDS, < 5000 mg/l) or connate ground water (high TDS, > 5000 mg/l). Deviations from the meteoric water line are the result of rock-water isotopic exchange, mixing or evaporation. Fluid source regions and residence times of selected thermal spring systems (Red Hill, Thermo) have been evaluated through the use of a σ D-contour map of central and western Utah. Ages for waters in these areas range from about 13 years to over 500 years. These estimates are comparable to those made for low-temperature hydrothermal systems in Iceland.     

Geochemistry of waters in the Valley of Ten Thousand Smokes region, Alaska

Meteoric waters from cold springs and streams outside of the 1912 eruptive deposits filling the Valley of Ten Thousand Smokes (VTTS) and in the upper parts of the two major rivers draining the 1912 deposits have similar chemical trends. Thermal springs issue in the mid-valley area along a 300-m lateral section of ash-flow tuff, and range in temperature from 21 to 29.8°C in early summer and from 15 to 17°C in mid-summer. Concentrations of major and minor chemical constituents in the thermal waters are nearly identical regardless of temperature. Waters in the downvalley parts of the rivers draining the 1912 deposits are mainly mixtures of cold meteoric waters and thermal waters of which the mid-valley thermal spring waters are representative. The weathering reactions of cold waters with the 1912 deposits appear to have stabilized and add only subordinate amounts of chemical constituents to the rivers relative to those contributed by the thermal waters. Isotopic data indicate that the mid-valley thermal spring waters are meteoric, but data is inconclusive regarding the heat source. The thermal waters could be either from a shallow part of a hydrothermal system beneath the 1912 vent region or from an incompletely cooled, welded tuff lens deep in the 1912 ash-flow sheet of the upper River Lethe area.Bicarbonate-sulfate waters resulting from interaction of near-surface waters and the cooling 1953–1968 southwest Trident plug issue from thermal springs south of Katmai Pass and near Mageik Creek, although the Mageik Creek spring waters are from a well-established, more deeply circulating hydrothermal system. Katmai caldera lake waters are a result of acid gases from vigorous drowned fumaroles dissolving in lake waters composed of snowmelt and precipitation.     

The hydrothermal system of the Calabozos caldera,central Chilean Andes

Active thermal springs associated with the late Pleistocene Calabozos caldera complex occur in two groups: the Colorado group which issues along structures related to caldera collapse and resurgence, and the Puesto Calabozos group, a nearby cluster that is chemically distinct and probably unrelated to the Colorado springs. Most of the Colorado group can be related to a hypothetical parent water containing ∼400 ppm Cl at ∼250°C by dilution with ≥50% of cold meteoric water. The thermal springs in the most deeply eroded part of the caldera were derived from the same parent water by boiling.The hydrothermal system has probably been active for at least as long as 300,000 years, based on geologic evidence and calculations of paleo-heat flow. There is no evidence for economic mineralization at shallow depth. The Calabozos hydrothermal system would be an attractive geothermal prospect were its location not so remote.     

Geothermal studies in China

Geothermal studies have been conducted in China continuously since the end of the 1950's with renewed activity since 1970. Three areas of research are defined: (1) fundamental theoretical research on geothermics, including subsurface temperatures, terrestrial heat flow and geothermal modeling; (2) exploration for geothermal resources and exploitation of geothermal energy; and (3) geothermal studies in mines.Regional geothermal studies have been conducted recently in North China and more than 2000 values of subsurface temperature have been obtained. Temperatures at a depth of 300 m generally range from 20 to 25°C with geothermal gradients from 20 to 40°C/km. These values are regarded as an average for the region with anomalies related to geological factors.To date, 22 reliable heat flow data from 17 sites have been obtained in North China and the data have been categorized according to fault block tectonics. The average heat flow value at 16 sites in the north is 1.3 HFU, varying from 0.7 to 1.8 HFU. It is apparent that the North China fault block is characterized by a relatively high heat flow with wide variations in magnitude compared to the mean value for similar tectonic units in other parts of the world. It is suggested that although the North China fault block can be traced back to the Archaean, the tectonic activity has been strengthening since the Mesozoic resulting in so-called “reactivation of platform” with large-scale faulting and magmatism.Geothermal resources in China are extensive; more than 2000 hot springs have been found and there are other manifestations including geysers, hydrothermal explosions, hydrothermal steam, fumaroles, high-temperature fountains, boiling springs, pools of boiling mud, etc. In addition, there are many Meso-Cenozoic sedimentary basins with widespread aquifers containing geothermal water resources in abundance. The extensive exploration and exploitation of these geothermal resources began early in the 1970's. Since then several experimental power stations using thermal water have been set up in Fengshun (Fungshun),     

The hydrothermal system of Nevado del Ruiz volcano,Colombia

Hot springs and steam vents on the slopes of Nevado del Ruiz volcano provide evidence regarding the nature of hydrothermal activity within the summit and flanks of the volcano. At elevations below 3000 m, alkali-chloride water is discharged from two groups of boiling springs and several isolated warm springs on the western slope of Nevado del Ruiz. Chemical and isotopic geothermometers suggest that the boiling springs are fed by an aquifer having a subsurface equilibration temperature of at least 175°C, and the sampled warm spring is fed by an aquifer having a subsurface equilibration temperature near 150°C. Similarities in conservative solute ratios (e.g., B/Cl) indicate that the alkali-chloride waters may be related to a single reservoir at depth. Isotopic ratios of hydrogen and oxygen indicate that recharge for the alkali-chloride aquifers comes mostly from higher elevations on the volcano. Steam vents and steam-heated bicarbonate-sulfate springs at higher elevations, along a linear structural trend with the alkali-chloride springs, may be derived partly from the alkali-chloride water at depth by boiling. Steam from the vents (84°C) yields a gas geothermometer temperature of 209°C. Acid-sulfate-chloride and acid-sulfate waters are discharged widely from warm springs above 3000 m on the northern and eastern slopes of Nevado del Ruiz. Similarities in B/Cl and SO₄/Cl ratios suggest that the acid waters are mixtures of water from an acid-sulfate-chloride reservoir with various proportions of shallow, dilute groundwater. The major source of sulfate, halogens, and acidity for the acid waters may be high-temperature magmatic gases. Available data on hot spring temperatures and compositions indicate that they have remained fairly stable since 1968. However, the eruption of November 13, 1985 apparently caused an increase in sulfate concentration in some of the acid springs that peaked about a year after the eruption. Long-term monitoring of hot spring compositions over many years will be required to better define the effects of volcanic activity on the Nevado del Ruiz hydrothermal system.     

Microearthquake survey in the hot spring area in Parbati Valley (Himachal Pradesh, India)

A number of hot springs occur in the Parbati Valley in Himachal Pradesh in India. Temperatures range from 21 to 96°C, the boiling point of water at that altitude. Geological conditions, temperature variations and chemical composition of spring water in the Parbati Valley hydrogeological unit indicate that the deep thermal fluids are of meteoric origin. The maximum temperature acquired by water during its circulation is estimated to come close to 200°C. In order to assess the possibility of extracting geothermal energy, a seismic survey was arranged to locate the hypocentres of microearthquakes associated with the thermal source. A total of eight microearthquake units was set up at an interstation spacing of about 10 km and two months recording were obtained. During this period an average of 2–3 events per day was recorded with S—P interval less than 5 seconds. The data have been analysed with the help of Hypo 71, a Fortran IV computer program designed to determine the hypocentral parameters of earthquakes from seismic data. The results indicate faulting but there is no apparent spatial relationship to surface manifestations of geothermal energy.     

Fluid geochemistry of natural manifestations from the Southern Poroto–Rungwe hydrothermal system (Tanzania): Preliminary conceptual model

The South Poroto–Rungwe geothermal field, in the northern part of the Malawi rift, Tanzania divides in two main areas. The relatively high altitude northern area around the main Ngozi, Rungwe, Tukuyu and Kyejo volcanoes, is characterised by cold and gas-rich springs. In contrast, hot springs occur in the southern and low-altitude area between the Kyela and Livingstone faults. The isotopic signature of the almost stagnant, cold springs of the Northern district is clearly influenced by H₂O–CO_2(g) exchange as evidenced from negative oxygen-shifts in the order of few deltas permil. In contrast, the isotopic signature of waters discharged from the hot springs of the Southern district is markedly less affected by the H₂O–CO_2(g) interaction. This evidence is interpreted as an effect of the large, permanent outflow of these springs, which supports the hypothesis of a regional-scale recharge of the major thermal springs. Measurements of carbon isotope variations of the dissolved inorganic carbon of waters and CO_2(g) from the Northern and Southern springs support a model of CO_2(g)-driven reactivity all over the investigated area. Our combined chemical and isotopic results show that the composition of hot springs is consistent with a mixing between (i) cold surface fresh (SFW) and (ii) Deep Hot Mineralised (DHMW) Water, indicating that the deep-originated fluids also supply most of the aqueous species dissolved in the surface waters used as local potable water. Based on geothermometric approaches, the temperature of the deep hydrothermal system has been estimated to be higher than 110 °C up to 185 °C, in agreement with the geological and thermal setting of the Malawi rift basin. Geochemical data point to (i) a major upflow zone of geothermal fluids mixed with shallow meteoric waters in the Southern part of the province, and (ii) gas absorption phenomena in the small, perched aquifers of the Northern volcanic highlands.     

Radioactive elements in sediments and altered rocks of the Kikhpinych long-lived volcanic center

Data on the concentration of radioactive elements in mineral sediments and hydrothermally altered rocks of the long-lived Kikhpinych volcanic center are presented. High concentrations of uranium (up to 31 g/t) and thorium (up to 46 g/t) relative to the average values for the dacites of Kamchatka and the Uzon-Geyser depression are found in white kaolinite clays of mud pots and in dacites of the Yuzhnoe Kikhpinych thermal field transformed into kaolinite clays. In this field and in the Severnoe thermal field (in the crater of Staryi Kikhpinych Volcano) high values of volume radon activity (VA Rn > 1000 kBq/m³) were recorded in subsoil air. These high concentrations of uranium and thorium in fresh mineral sediments and anomalous values of VA Rn in subsoil air of hydrothermally altered rocks are considered to have resulted from the mass transfer of radioactive elements by fluid flows of the hydrothermal system.     

Hot springs of Rhodesia: Their noble gases,isotopic and chemical composition

Four of Rhodesia's hottest spring complexes (54–100°C) were studied. Tritium contents were very low, compared to adjacent rivers, indicating that the samples studied were indigenous, deep-seated water which had undergone negligible intermixing with surface water.The noble-gas measurements revealed: (1) the waters are meteoric; (2) the noble gases were kept in closed-system conditions in the ground; (3) paleotemperatures are 26–31°C; (4) the boiling Binga springs lost part of their noble gases.Independently, measurements of stable isotopes indicate the meteoric origin of the springs. The chemical composition of the waters clearly reflects their origin from two groups of rocks — one from Karroo sediments and one from crystalline rocks.     

Hydrogeochemistry of thermal and mineral water springs of the Azores archipelago (Portugal)

Mineral and thermal water chemistry from the Azores archipelago was investigated in order to discriminate among hydrochemical facies and isotopic groups and identify the major geochemical processes that affect water composition. A systematic geochemical survey of mineral and thermal water chemistry was carried out, incorporating new data as well as results from the literature. The Azores are a volcanic archipelago consisting of nine islands and samples were collected at São Miguel, Graciosa, Faial, São Jorge, Pico and Flores islands. Hydrothermal manifestations show the effects of active volcanism on several islands. Discharges are mainly related to active Quaternary central volcanoes, of basaltic to trachytic composition, but also some springs are related to older dormant or extinct volcanoes.Multivariate analysis – principal component and cluster analysis – enables classification of water compositions into 4 groups and interpretation of processes affecting water compositions. Groups 1 and 2 discharge from perched-water bodies, and mostly correspond to Na–HCO₃ and Na–HCO₃–Cl type waters. These groups comprise of cold, thermal (27 °C–75 °C) and boiling waters (92.2 °C–93.2 °C), with a wide TDS range (77.3–27, 145.7 mg/L). Group 3 is made of samples of dominated Na–SO₄ from very acid boiling pools (pH range of 2.02–2.27) which are fed by steam-heated perched-water bodies. Group 4 is representative of springs from the basal aquifer system and corresponds to Na–Cl type fluids, with compositions dominated by seawater.Results are used to further develop a conceptual model characterizing the geochemical evolution of the studied waters. Mineral and thermal waters discharging from perched-water bodies are of meteoric origin and chemically evolve by absorption of magmatic volatiles (CO₂) and by a limited degree of rock leaching. Existing data also suggest mixture between cold waters and thermal water. Water chemistry from springs that discharge from the basal aquifer system evolves by mixing with seawater; although, processes such as absorption of magmatic volatiles (CO₂), rock leaching and mixture with hydrothermal waters are not excluded by the data because the actual composition of these waters deviates from that expected considering only conservative mixing between fresh and seawater.     

Chemical and stable isotopic models for boundary creek warm springs, southwestern Yellowstone National Park, Wyoming

Thermal springs of the Boundary Creek hydrothermal system in the southwestern part of Yellowstone Park outside the caldera boundary vary in chemical and isotopic composition, and temperature. The diversity may be accounted for by a combination of processes including boiling of a deep thermal water, mixing of the deep thermal water with cool meteoric water and/or with condensed steam or steam-heated meteoric water, and chemical reactions with surrounding rocks. Dissolved-silica, Na⁺, K⁺ and Ca²⁺ contents of the thermal springs could result from a thermal fluid with a temperature of 200 ± 20°C. Chloride-enthalpy and silica-enthalpy mixing models suggest mixing of 230°C, 220 mg/l Cl⁻ thermal water with cool, low-Cl⁻ components. A 350 to 390°C component with Cl⁻ ≥ 300 mg/l is possibly present in thermal springs inside the caldera but is not required to fit observed spring chemical and isotopic compositions. Irreversible mass transfer models in which a low-temperature water reacts with volcanic glass as it percolates downward and warms, can account for observed pH and dissolved-silica, K⁺, Na⁺, Ca²⁺ and Mg²⁺ concentrations, but produces insufficient Cl⁻ or F⁻ for measured concentrations in the warm springs. The ratio of a_Na/a_H, and Cl⁻ are best accounted for in mixing models. The water-rock interaction model fits compositions of acid-sulfate waters observed at Summit Lake and of low-Cl⁻ waters involved in mixing.The cold waters collected from southwestern Yellowstone Park have δD values ranging from −118 to −145 per mil and δ¹⁸O values of −15.9 to −19.4 per mil. Two samples from nearby Island Park have δD values of −112 and −114 per mil and δ¹⁸O values of −15.1 and −15.3 per mil. All samples of thermal water plot significantly to the right of the meteoric water line. The low Cl⁻ and variable δD values of the thermal waters indicate isotopic compositions are derived by extensive dilution with cold meteoric water and by steam separation on ascent to the surface. Many of the hot springs with higher δD values may contain in addition a significant amount of high-D, low-Cl⁻, acid-sulfate or steam-heated meteoric water. Mixing models, Cl⁻ content and isotopic compositions of thermal springs suggest that 30% or less of a deep thermal component is present. For example, the highest-temperature springs from Three Rivers, Silver Scarf and Upper Boundary Creek thermal areas contain up to 70% cool meteoric water and 30% hot water components, springs at Summit Lake and Middle Boundary Creek spring 57 are acid-sulfate or steam-heated meteoric water; springs 27 and 48 from Middle Boundary Creek and 49 from Mountain Ash contain in excess of 50% acid-sulfate water; and Three Rivers spring 46 and Phillips could result from mixing hot water with 55% cool meteoric water followed by mixing of acid-sulfate water. Extensive dilution by cool meteoric water increases the uncertainties in quantity and nature of the deep meteoric, thermal component.     

Using multivariate statistical analysis of groundwater major cation and trace element concentrations to evaluate groundwater flow in a regional aquifer

Groundwater samples were collected from 11 springs in Ash Meadows National Wildlife Refuge in southern Nevada and seven springs from Death Valley National Park in eastern California. Concentrations of the major cations (Ca, Mg, Na and K) and 45 trace elements were determined in these groundwater samples. The resultant data were subjected to evaluation via the multivariate statistical technique principal components analysis (PCA), to investigate the chemical relationships between the Ash Meadows and Death Valley spring waters, to evaluate whether the results of the PCA support those of previous hydrogeological and isotopic studies and to determine if PCA can be used to help delineate potential groundwater flow patterns based on the chemical compositions of groundwaters. The results of the PCA indicated that groundwaters from the regional Paleozoic carbonate aquifers (all of the Ash Meadows springs and four springs from the Furnace Creek region of Death Valley) exhibited strong statistical associations, whereas other Death Valley groundwaters were chemically different. The results of the PCA support earlier studies, where potentiometric head levels, δ¹⁸O and δD, geological relationships and rare earth element data were used to evaluate groundwater flow, which suggest groundwater flows from Ash Meadows to the Furnace Creek springs in Death Valley. The PCA suggests that Furnace Creek groundwaters are moderately concentrated Ash Meadows groundwater, reflecting longer aquifer residence times for the Furnace Creek groundwaters. Moreover, PCA indicates that groundwater may flow from springs in the region surrounding Scotty's Castle in Death Valley National Park, to a spring discharging on the valley floor. The study indicates that PCA may provide rapid and relatively cost‐effective methods to assess possible groundwater flow regimes in systems that have not been previously investigated. Copyright © 1999 John Wiley & Sons, Ltd.     

Chemical composition of thermal springs, cold springs, streams, and gas vents in the Mt. Amiata geothermal region (Tuscany, Italy)

A geochemical study of thermal and cold springs, stream waters and gas emissions has been carried out in the Mt. Amiata geothermal region.The cold springs and stream waters do not seem to have received significant contribution from hot deep fluids. On the contrary, the thermal springs present complex and not clearly quantifiable interactions with the hot fluids of the main geothermal reservoir.The liquid-dominated systems in the Mt. Amiata area, like most of the high-enthalpy geothermal fields in the world, are characterized by saline, NaCl fluids. The nature of the reservoir rock (carbonatic and anhydritic), and its widespread occurrence in central Italy, favor a regional circulation of “Ca-sulfate” thermal waters, which discharge from its outcrop areas. Waters of this kind, which have been considered recharge waters of the known geothermal fields, dilute, disperse and react with the deep geothermal fluids in the Mt. Amiata area, preventing the use of the main chemical geothermometers for prospecting purposes. The temperatures obtained from the chemical geothermometers vary widely and are generally cooler than temperatures measured in producing wells.Other thermal anomalies in central Italy, apart from those already known, might be masked by the above-mentioned circulation. A better knowledge of deep-fluid chemistry could contribute to the calibration of specific geothermometers for waters from reservoirs in carbonatic rocks.     

The time-dependent variation of hydrogeochemical characteristics, thermal regime, and biocenoses in the fresh and thermal waters of the Lake Karymskii basin following the catastrophic underwater eruption of 1996 in the Akademii Nauk Caldera, Kamchatka

The results of biohydrogeochemical monitoring are used to study time-dependent variations in the hydrogeochemical characteristics of the Lake Karymskii water mass, the state and characteristics of underwater discharge zones in the Tokarev crater (formed in 1996), hydrogeochemical characteristics of thermal springs around the lake, and the biota succession in the lake for the period 1996–2006 (2007). We detected a stratification in the chemical composition of water over depth and the presence of persistent zones of increased concentrations of dissolved oxygen. We found an alkalization of lake water and a decrease in its total salinity. The new thermal springs and underwater discharges of thermal water and gases were found to be continuing. The first data were obtained on the concentration of microelements in the thermal springs of the Karymskii basin. The biodiversity of algae in Lake Karymskii was largely increased by the species diversity of benthic Bacillariophyta. The plankton phytocomponent of the precatastrophic period was found to have been regenerated in the lake as of April 2007.     

Geochemistry of Quaternary travertines in the region north of Rome (Italy): structural, hydrologic and paleoclimatic implications

In the Tyrrhenian region of central Italy, late Quaternary fossil travertines are widespread along two major regional structures: the Tiber Valley and the Ancona-Anzio line. The origin and transport of spring waters from which travertines precipitate are elucidated by chemical and isotopic studies of the travertines and associated thermal springs and gas vents. There are consistent differences in the geochemical and isotopic signatures of thermal spring waters, gas vents and present and fossil travertines between east and west of the Tiber Valley. West of the Tiber Valley, δ¹³C of CO₂ discharged from gas vents and δ¹³C of fossil travertines are higher than those to the east. To the west the travertines have higher strontium contents, and gases emitted from vents have higher ³He/⁴He ratios and lower N₂ contents, than to the east. Fossil travertines to the west have characteristics typical of thermogene (thermal spring) origin, whereas those to the east have meteogene (low-temperature) characteristics (including abundant plant casts and organic impurities). The regional geochemical differences in travertines and fluid compositions across the Tiber Valley are interpreted with a model of regional fluid flow. The regional Mesozoic limestone aquifer is recharged in the main axis of the Apennine chain, and the groundwater flows westward and is discharged at springs. The travertine-precipitating waters east of the Tiber Valley have shallower flow paths than those to the west. Because of the comparatively short fluid flow paths and low (normal) heat flow, the groundwaters to the east of the Tiber Valley are cold and have CO₂ isotopic signatures, indicating a significant biogenic contribution acquired from soils in the recharge area and limited deeply derived CO₂. In contrast, spring waters west of the Tiber Valley have been conductively heated during transit in these high heat-flow areas and have incorporated a comparatively large quantity of CO₂ derived from decarbonation of limestone. The elevated strontium content of the thermal spring water west of the Tiber Valley is attributed to deep circulation and dissolution of a Triassic evaporite unit that is stratigraphically beneath the Mesozoic limestone. U-series age dates of fossil travertines indicate three main periods of travertine formation (ka): 220-240, 120-140 and 60-70. Based on the regional flow model correlating travertine deposition at thermal springs and precipitation in the recharge area, we suggest that pluvial activity was enhanced during these periods. Our study suggests that travertines preserve a valuable record of paleofluid composition and paleoprecipitation and are thus useful for reconstructing paleohydrology and paleoclimate.     

Electrical signatures due to thermal anomalies along mobile belts reactivated by the trail and outburst of mantle plume: Evidences from the Indian subcontinent

In this study the geodynamical scenario along with concepts of mantle plume and mobile belts is utilized to show that most of the existing and potential high thermal regions fall along the (mobile arms affected by the outburst and) traces of mantle plumes. Effects of channeling and partitioning of thermomagmatic flux (TMF) due to these mantle plumes along the mobile belts, particularly near the triple junctions, can be seen in the form of high heat flow and presence of hot springs. Triple junctions manifest over the Indian lithosphere are: Kutch-Cambay, Narmada Son-Godavari, Tapi-Mahanadi, Tapi-Damodar, Pondicherry region, Gulf of Mannar and SW corner of the subcontinent (off-shore), etc. Apart from mobile belts, the deltaic regions of Krishna, Godavari, Ganga, Cauvery, Narmada-Tapi and Indus, etc., are also posses higher level of thermal anomalies as these regions seem to have been substantially influenced by outbursts and traces of Reunion, Kerguelen, Marion and Crozet hotspots. This is reflected from the correlation between plume affected mobile belts and high heat flow regions, large number of hot springs, anomalous electrical conductivity and also deformation or seismicity. Such correlation can be seen along Cambay, west coast trend, Narmada-Son lineament zone, Godavari-Damodar grabens and Bengal basin. Himalayan belt being ongoing collision zone, thermal anomalies are identified in the form of hot springs along the Himalayan arc. At some locations, which might be junction of tectonic trends, there exist significantly large thermal outputs. Puga in Himalayan region is one such example, as seen from high heat flow (max. 468 mW m^− 2) and geothermal gradient (234 °C/km max.). Similarly, Tatapani in Narmada Son Lineament (NSL) region is another such example. The present study discusses the correlation between thermal reservoirs identified by magnetotelluric (MT) study results and plume activity and suggests the need for systematic and detailed MT investigations along plume activated mobile strips in other regions to search for geodynamical history and geothermal resources.     

The taxonomical and functional diversity of three groups of aquatic insects in rheocrene karst springs are affected by different environmental factors

Karst springs represent valuable and often the most threatened habitats in the riverine landscape. Unlike other stream habitats, they have several specifics that determine their insularity in the river continuum, e.g., high seasonal thermal and chemical stability. The presented study aimed to find out the taxonomical and functional richness of three groups of aquatic insects (Ephemeroptera, Plecoptera and Trichoptera) in the Western Carpathians karst springs, as well as uncover the mechanism of the EPT community assembly. Low within-site species richness was generally found, however, there was high between-site diversity and thus high total diversity of the studied groups of benthic invertebrates as well. Species richness of the EPT community was higher in larger and colder springs: those with lower concentrations of CO₂ and Fe, as well as higher concentrations of SO₄²⁻. Analysis of functional richness, as well as functional dispersion, did not reveal any clear assembly mechanism in the spring EPT community; however, both analyses indicated a higher proportion of environmental filtering there. Unlike the taxonomic richness, the functional richness of the EPT community was significantly higher in small and medium springs with higher water temperatures, as well as in springs with the presence of deadwood. Between-site dissimilarities in the functional composition of EPT were significantly correlated with environmental differences of springs, which determined variables such as spring size and temperature, as well as the concentration of CO₂ and SiO₂.