Scaling relations of moment magnitude,local magnitude,and duration magnitude for earthquakes originated in northeast India

In this study, we aim to improve the scaling between the moment magnitude (M _W), local magnitude (M _L), and the duration magnitude (M _D) for 162 earthquakes in Shillong-Mikir plateau and its adjoining region of northeast India by extending the M _W estimates to lower magnitude earthquakes using spectral analysis of P-waves from vertical component seismograms. The M _W-M _L and M _W-M _D relationships are determined by linear regression analysis. It is found that, M _W values can be considered consistent with M _L and M _D, within 0.1 and 0.2 magnitude units respectively, in 90 % of the cases. The scaling relationships investigated comply well with similar relationships in other regions in the world and in other seismogenic areas in the northeast India region.     

Sampling uncertainties and source <Emphasis Type="Italic">b</Emphasis> likelihood for the Gutenberg-Richter <Emphasis Type="Italic">b</Emphasis> value from the Aki-Utsu method

The Aki-Utsu method of Gutenberg-Richter (G-R) b value estimation is often misapplied so that estimations not using the G-R histogram are often meaningless because they are not based on adequate samples. We propose a method to estimate the likelihood Pr(b?b _m , N, M ₁, M ₂) that an observed b _m estimate, based on a sample of N magnitudes within an [M ₁????≤?ΔM/2,?M ₂?+?ΔM/2) range, where ΔM?=?0.1 is the usual rounding applied to magnitudes, is due to a “true” source b value, b, and use these likelihoods to estimate source b ranges corresponding to various confidence levels. As an example of application of the method, we estimate the b values before and after the occurrence of a 7.4-magnitude earthquake in the Mexican subduction zone, and find a difference of 0.82 between them with 100% confidence that the b values are different.     

A study of Guptkashi,Uttarakhand earthquake of 6 February 2017 (<Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript>5.3) in the Himalayan arc and implications for ground motion estimation

The 2017 Guptkashi earthquake occurred in a segment of the Himalayan arc with high potential for a strong earthquake in the near future. In this context, a careful analysis of the earthquake is important as it may shed light on source and ground motion characteristics during future earthquakes. Using the earthquake recording on a single broadband strong-motion seismograph installed at the epicenter, we estimate the earthquake’s location (30.546° N, 79.063° E), depth (H?=?19 km), the seismic moment (M₀?=?1.12×10¹⁷ Nm, M _w 5.3), the focal mechanism (φ?=?280°, δ?=?14°, λ?=?84°), the source radius (a?=?1.3 km), and the static stress drop (Δσ _s ~22 MPa). The event occurred just above the Main Himalayan Thrust. S-wave spectra of the earthquake at hard sites in the arc are well approximated (assuming ω^?2 source model) by attenuation parameters Q(f)?=?500f^0.9, κ?=?0.04 s, and f_max?=?infinite, and a stress drop of Δσ?=?70 MPa. Observed and computed peak ground motions, using stochastic method along with parameters inferred from spectral analysis, agree well with each other. These attenuation parameters are also reasonable for the observed spectra and/or peak ground motion parameters in the arc at distances ≤?200 km during five other earthquakes in the region (4.6?≤?M _w ?≤?6.9). The estimated stress drop of the six events ranges from 20 to 120 MPa. Our analysis suggests that attenuation parameters given above may be used for ground motion estimation at hard sites in the Himalayan arc via the stochastic method.     

Gravity anomaly and crustal density structure in Jilantai rift zone and its adjacent region

This paper deals with the interpretation of Bouguer gravity anomalies measured along a 250 km long Suhaitu-Etuokeqi gravity profile located at the transitional zone of the Alxa and Ordos blocks where geophysical characteristics are very complex. The analysis is carried out in terms of the ratio of elevation and Bouguer gravity anomaly, the normalized full gradient of a section of the Bouguer gravity anomaly (G ^h ) and the crustal density structure reveal that (1) the ratio of highs and lows of elevation and Bouguer gravity anomaly is large between Zhengyiguan fault (F4) and Helandonglu fault (F6), which can be explained due to crustal inhomogeneities related to the uplift of the Qinghai-Tibet block in the northeast; (2) the main active faults correspond to the G ^h contour strip or cut the local region, and generally show strong deformation characteristics, for example the Bayanwulashan mountain front fault (F1) or the southeast boundary of Alxa block is in accord with the western change belt of G ^h , a belt about 10 km wide that extends to about 30 km; (3) Yinchuan-Pingluo fault (F8) is the seismogenic structure of the Pingluo M earthquake, and its focal depth is about 15 km; (4) the Moho depth trend and Bouguer gravity anomaly variation indicates that the regional gravity field is strongly correlated with the Moho discontinuity.     

Site Specific Ground Motion Modeling and Seismic Response Analysis for Microzonation of Baku,Azerbaijan

We investigated ground response for Baku (Azerbaijan) from two earthquakes of magnitude M6.3 occurred in Caspian Sea (characterized as a near event) and M7.5 in Shamakhi (characterized as a remote extreme event). S-wave velocity with the average shear wave velocity over the topmost 30 m of soil is obtained by experimental method from the V _P values measured for the soils. The downtown part of Baku city is characterized by low V_S30 values (< 250 m/s), related to sand, water-saturated sand, gravel-pebble, and limestone with clay. High surface PGA of 240 gal for the M7.5 event and of about 190 gal for the M6.3 event, and hence a high ground motion amplification, is observed in the shoreline area, through downtown, in the north-west, and in the east parts of Baku city with soft clays, loamy sands, gravel, sediments.     

Detailed Study of Time Variations in the Gutenberg–Richter <Emphasis Type="Italic">b</Emphasis>-value Based on Highly Accurate Seismic Observations at the Garm Prognostic Site,Tajikistan

The time variations in the Gutenberg–Richter b-value are minutely studied based on the data of highly accurate seismological observations at the Garm prognostic site, Tajikistan, where a stationary network of seismic stations of the Complex Seismological Expedition (CSE) of Schmidt Institute of Physics of the Earth (IPE) of the USSR (Russian) Academy of Sciences was in operation from 1955 to 1992. A total of 93035 local earthquakes ranging from 0.0 to 6.3 in the Ml magnitudes are considered. The spatiotemporal fluctuations in the minimal magnitude of completeness of the earthquakes, Mc, are analyzed. The study considers a 25-year interval of the observations at the center of the observation system within which Mc = 0.9. It is shown that in most cases, the b-value and log₁₀E^2/3 experience characteristic time variations before the earthquakes with magnitudes higher than the minimal magnitude of the predicted earthquake (MPE). The 6-year anomaly in the parameters’ b-value, log₁₀E^2/3, and log₁₀N associated with the single strongest earthquake with M = 6.3 that occurred in the observation region on October 26, 1984 is revealed. The inversely proportional relationship is established between the time variations in the b-value and the time variations in the velocities of seismic waves Vp and Vp/Vs. It is shown that the exponent p in the power function which links the time variations of the b-value and log₁₀E^2/3 is higher in the zones of crustal compression than in the zones of extension. It is simultaneously confirmed that the average b-value in the zones of compression is lower than in the zones of extension. It is established that in the case of earthquakes with M ≥ 2.6, the time series of seismic activity log₁₀N_i and the time series of the b-value are highly cross correlated with a coefficient of r ≈ 0.75, whereas in the case of earthquakes with M ≥ 0.9, the coefficient of cross correlation between these time series is close to zero (r ≈ 0.06). The law of variations in the slope of the lines approximating the relationship between the log₁₀N_i time series in the different magnitude ranges (M ≥ Mc_i) and b-value time series is obtained. It is hypothesized that the seismic activity of the earthquakes with high magnitudes can be estimated provided that the parameters of the time series of the b-value and time series of the number of earthquakes logN(ΔM_i) in the range of low magnitudes are known. It is concluded that using the parameter log₁₀N for prognostic estimates of the strong earthquakes only makes sense for earthquakes having moderate and large magnitudes. It is inferred that the time variations in the b-value are predominantly contributed by the time variations of the earthquakes with relatively large magnitudes.     

Determination of source parameters of strong earthquakes of Kamchatka,the Kurile Islands,and Japan from aftershock sequences

Aftershock sequences of some strong earthquakes of Kamchatka, the Kurile Islands, and Japan are examined. Such source parameters as the length L, along-dip width W, motion on fault D, and stress drop Δσ are determined from the aftershock sequences considered. The values of these parameters were obtained by the formal estimation of linear source parameters (lower bound estimates) and visually (upper bound estimates). The correlation dependences of the obtained parameters on the surface wave (M _S ) and seismic moment (M _W ) magnitudes are calculated.     

Variation of <Emphasis Type="Italic">Q</Emphasis> value before and after the 1999 Xiuyan,Liaoning Province, <Emphasis Type="Italic">M</Emphasis>=5.4 earthquake on the basis of analysis on attenuation dispersion of P waves

A method for determining medium quality factor is developed on the basis of analyzing the attenuation dispersion of the arrived first period P wave. In order to enhance signal to noise ratio, improve the resolution in measurement and reduce systematic error we applied the data resampling technique. The group velocity delay of P wave was derived by using an improved multi-filtering method. Based on a linear viscoelastic relaxation model we deduced the medium quality factor Q _m, and associated error with 95% confidence level. Applying the method to the seismic record of the Xiuyan M=5.4 earthquake sequences we obtained the following result: (1) High Q _m started to appear from Nov. 9, 1999. The events giving the deduced high Q _m value clustered in a region with their epicenter distances being between 32 and 46 km to the Yingkou station. This Q _m versus distance observation obviously deviates from the normal trend of Q _m linearly increasing with distance. (2) The average Q _m before the 29 Dec. 1999 M=5.4 earthquake is 460, while the average Q _m between the M=5.4 event and the 12 Jan. 2000 M=5.1 earthquake is 391, and the average Q _m after the M=5.1 event is 204.     

Precursor times of abnormal <Emphasis Type="Italic">b</Emphasis>-values prior to mainshocks

Seismic observations exhibit the presence of abnormal b-values prior to numerous earthquakes. The time interval from the appearance of abnormal b-values to the occurrence of mainshock is called the precursor time. There are two kinds of precursor times in use: the first one denoted by T is the time interval from the moment when the b-value starts to increase from the normal one to the abnormal one to the occurrence time of the forthcoming mainshock, and the second one denoted by T _p is the time interval from the moment when the abnormal b-value reaches the peak one to the occurrence time of the forthcoming mainshock. Let T* be the waiting time from the moment when the abnormal b-value returned to the normal one to the occurrence time of the forthcoming mainshock. The precursor time, T (usually in days), has been found to be related to the magnitude, M, of the mainshock expected in a linear form as log(T)?=?q?+?rM where q and r are the coefficient and slope, respectively. In this study, the values of T, T _p , and T* of 45 earthquakes with 3?≤?M?≤?9 occurred in various tectonic regions are compiled from or measured from the temporal variations in b-values given in numerous source materials. The relationships of T and T _p , respectively, versus M are inferred from compiled data. The difference between the values of T and T _p decreases with increasing M. In addition, the plots of T*/T versus M, T* versus T, and T* versus T-T* will be made and related equations between two quantities will be inferred from given data.     

Activation of seismicity in Central and South Asia after the Makran earthquakes: Possible acceleration of preparation of large seismic events in the Tien Shan region

Two zones of seismicity (ten events with M _w = 7.0–7.7) stretching from Makran and the Eastern Himalaya to the Central and EasternTien Shan, respectively, formed over 11 years after the great Makran earthquake of 1945 (M _w = 8.1). Two large earthquakes (M _w = 7.7) hit theMakran area in 2013. In addition, two zones of seismicity (M ≥ 5.0) occurred 1–2 years after theMakran earthquake in September 24, 2013, stretching in the north-northeastern and north-northwestern directions. Two large Nepal earthquakes struck the southern extremity of the “eastern” zone (April 25, 2015, M _w = 7.8 and May 12, 2015, M _w = 7.3), and the Pamir earthquake (December 7, 2015, M _w = 7.2) occurred near Sarez Lake eastw of the “western” zone. The available data indicate an increase in subhorizontal stresses in the region under study, which should accelerate the possible preparation of a series of large earthquakes, primarily in the area of the Central Tien Shan, between 70° and 79° E, where no large earthquakes (M _w ≥ 7.0) have occurred since 1992.     

Magnitude <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> in metropolitan France

The recent seismicity catalogue of metropolitan France Sismicité Instrumentale de l’Hexagone (SI-Hex) covers the period 1962–2009. It is the outcome of a multipartner project conducted between 2010 and 2013. In this catalogue, moment magnitudes (M _w) are mainly determined from short-period velocimetric records, the same records as those used by the Laboratoire de Détection Géophysique (LDG) for issuing local magnitudes (M _L) since 1962. Two distinct procedures are used, whether M _L-LDG is larger or smaller than 4. For M _L-LDG >4, M _w is computed by fitting the coda-wave amplitude on the raw records. Station corrections and regional properties of coda-wave attenuation are taken into account in the computations. For M _L-LDG ≤4, M _w is converted from M _L-LDG through linear regression rules. In the smallest magnitude range M _L-LDG <3.1, special attention is paid to the non-unity slope of the relation between the local magnitudes and M _w. All M _w determined during the SI-Hex project is calibrated according to reference M _w of recent events. As for some small events, no M _L-LDG has been determined; local magnitudes issued by other French networks or LDG duration magnitude (M _D) are first converted into M _L-LDG before applying the conversion rules. This paper shows how the different sources of information and the different magnitude ranges are combined in order to determine an unbiased set of M _w for the whole 38,027 events of the catalogue.     

Seismic source zoning and maximum credible earthquake prognosis of the Greater Kashmir Territory,NW Himalaya

We present the seismic source zoning of the tectonically active Greater Kashmir territory of the Northwestern Himalaya and seismicity analysis (Gutenberg-Richter parameters) and maximum credible earthquake (m _max) estimation of each zone. The earthquake catalogue used in the analysis is an extensive one compiled from various sources which spans from 1907 to 2012. Five seismogenic zones were delineated, viz. Hazara-Kashmir Syntaxis, Karakorum Seismic Zone, Kohistan Seismic Zone, Nanga Parbat Syntaxis, and SE-Kashmir Seismic Zone. Then, the seismicity analysis and maximum credible earthquake estimation were carried out for each zone. The low b value (<1.0) indicates a higher stress regime in all the zones except Nanga Parbat Syntaxis Seismic Zone and SE-Kashmir Seismic Zone. The m _max was estimated following three different methodologies, the fault parameter approach, convergence rates using geodetic measurements, and the probabilistic approach using the earthquake catalogue and is estimated to be M _w 7.7, M _w 8.5, and M _w 8.1, respectively. The maximum credible earthquake (m _max) estimated for each zone shows that Hazara Kashmir Syntaxis Seismic Zone has the highest m _max of M _w 8.1 (±0.36), which is espoused by the historical 1555 Kashmir earthquake of M _w 7.6 as well as the recent 8 October 2005 Kashmir earthquake of M _w 7.6. The variation in the estimated m _max by the above discussed methodologies is obvious, as the definition and interpretation of the m _max change with the method. Interestingly, historical archives (～900 years) do not speak of a great earthquake in this region, which is attributed to the complex and unique tectonic and geologic setup of the Kashmir Himalaya. The convergence is this part of the Himalaya is distributed not only along the main boundary faults but also along the various active out-of-sequence faults as compared to the Central Himalaya, where it is mainly adjusted along the main boundary fault.     

G: Fracture energy,friction and dissipation in earthquakes

Recent estimates of fracture energy G ^′ in earthquakes show a power-law dependence with slip u which can be summarized as G ^′ ∝ u ^a where a is a positive real slightly larger than one. For cracks with sliding friction, fracture energy can be equated to G _f : the post-failure integral of the dynamic weakening curve. If the dominant dissipative process in earthquakes is friction, G ^′ and G _f should be comparable and show a similar scaling with slip. We test this hypothesis by analyzing experiments performed on various cohesive and non-cohesive rock types, under wet and dry conditions, with imposed deformation typical of seismic slip (normal stress of tens of MPa, target slip velocity > 1 m/s and fast accelerations ≈ 6.5 m/s²). The resulting fracture energy G _f is similar to the seismological estimates, with G _f and G ^′ being comparable over most of the slip range. However, G _f appears to saturate after several meters of slip, while in most of the reported earthquake sequences, G ^′ appears to increase further and surpasses G _f at large magnitudes. We analyze several possible causes of such discrepancy, in particular, additional off-fault damage in large natural earthquakes.     

A new <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> estimation parameter for use in earthquake early warning systems

We propose a method that employs the squared displacement integral (ID2) to estimate earthquake magnitudes in real time for use in earthquake early warning (EEW) systems. Moreover, using τ _c and P _d for comparison, we establish formulas for estimating the moment magnitudes of these three parameters based on the selected aftershocks (4.0 ≤ M _s  ≤ 6.5) of the 2008 Wenchuan earthquake. In this comparison, the proposed ID2 method displays the highest accuracy. Furthermore, we investigate the applicability of the initial parameters to large earthquakes by estimating the magnitude of the Wenchuan M _s 8.0 mainshock using a 3-s time window. Although these three parameters all display problems with saturation, the proposed ID2 parameter is relatively accurate. The evolutionary estimation of ID2 as a function of the time window shows that the estimation equation established with ID2 ^Ref determined from the first 8-s of P wave data can be directly applicable to predicate the magnitudes of 8.0. Therefore, the proposed ID2 parameter provides a robust estimator of earthquake moment magnitudes and can be used for EEW purposes.     

Probabilistic aftershock hazard analysis,two case studies in West and Northwest Iran

Aftershock hazard maps contain the essential information for search and rescue process, and re-occupation after a main-shock. Accordingly, the main purposes of this article are to study the aftershock decay parameters and to estimate the expected high-frequency ground motions (i.e., Peak Ground Acceleration (PGA)) for recent large earthquakes in the Iranian plateau. For this aim, the Ahar-Varzaghan doublet earthquake (August 11, 2012; M _N =6.5, M _N =6.3), and the Ilam (Murmuri) earthquake (August 18, 2014 ; M _N =6.2) have been selected. The earthquake catalogue has been collected based on the Gardner and Knopoff (Bull Seismol Soc Am 64(5), 1363-1367, 1974) temporal and spatial windowing technique. The magnitude of completeness and the seismicity parameters (a,??b) and the modified Omori law parameters (P,??K,??C) have been determined for these two earthquakes in the 14, 30, and 60 days after the mainshocks. Also, the temporal changes of parameters (a,??b,??P,??K,??C) have been studied. The aftershock hazard maps for the probability of exceedance (33%) have been computed in the time periods of 14, 30, and 60 days after the Ahar-Varzaghan and Ilam (Murmuri) earthquakes. For calculating the expected PGA of aftershocks, the regional and global ground motion prediction equations have been utilized. Amplification factor based on the site classes has also been implied in the calculation of PGA. These aftershock hazard maps show an agreement between the PGAs of large aftershocks and the forecasted PGAs. Also, the significant role of b parameter in the Ilam (Murmuri) probabilistic aftershock hazard maps has been investigated.     

The coda attenuation of the Yao’an area in Yunnan Province

An earthquake withM=6.5 happened on January 15, 2000 in Yao’an of Yunnan Province. After the earthquake, a temporary digital network with 6 detectors around the epicenter area was set up. 402 aftershocks were located more precisely. According to coda short recording observed, the coda averaging quality factor has been acquired via Sato’s single scattering model analyses,Q _c(f)=49f ^0.95,f=1.5～20.0 Hz, which has the attenuation characteristics of high structural active region.     

Earthquake hazard and risk assessment based on Unified Scaling Law for Earthquakes: Greater Caucasus and Crimea

We continue applying the general concept of seismic risk analysis in a number of seismic regions worldwide by constructing regional seismic hazard maps based on morphostructural analysis, pattern recognition, and the Unified Scaling Law for Earthquakes (USLE), which generalizes the Gutenberg-Richter relationship making use of naturally fractal distribution of earthquake sources of different size in a seismic region. The USLE stands for an empirical relationship log₁₀N(M, L)?=?A?+?B·(5 – M)?+?C·log₁₀L, where N(M, L) is the expected annual number of earthquakes of a certain magnitude M within a seismically prone area of linear dimension L. We use parameters A, B, and C of USLE to estimate, first, the expected maximum magnitude in a time interval at seismically prone nodes of the morphostructural scheme of the region under study, then map the corresponding expected ground shaking parameters (e.g., peak ground acceleration, PGA, or macro-seismic intensity). After a rigorous verification against the available seismic evidences in the past (usually, the observed instrumental PGA or the historically reported macro-seismic intensity), such a seismic hazard map is used to generate maps of specific earthquake risks for population, cities, and infrastructures (e.g., those based on census of population, buildings inventory). The methodology of seismic hazard and risk assessment is illustrated by application to the territory of Greater Caucasus and Crimea.     

Isolated bursts of irregular geomagnetic pulsations in the region of the dayside cusp

In this work, the results of comparative analysis of morphological regularities of right-polarized (R type) and left-polarized (L type) isolated bursts of ipcl pulsations (irregular pulsations continuous long period) with an anomalously large amplitude in the region of the daytime polar cusp, as well as conditions of their excitation, are presented. It has been found that R and L bursts are similar in the maximum amplitude level, wave packet duration, spectral composition, magnitude of ellipticity, diurnal variation shape, and other characteristics. At the same time, bursts of the R and L type are excited at different degrees of plasma turbulence in the generation region, at different IMF orientations in the plane of ecliptic, as well as in the plane perpendicular to it, and at different dynamics of the parameter β (characterizing the ratio of the thermal pressure to the magnetic pressure) and Alfvén Mach number Ma. It is supposed that the generation of isolated bursts of the R and L types can be related to the amplification of the plasma turbulence level due to the development of wind instability at the front boundary of the magnetosphere, and features of their polarization can be interpreted in the scope of the model of nonlinear propagation of Alfvén waves.     

Earliest fossil fruit record of the genus Paliurus (Rhamnaceae) in Eastern Asia

The genus Paliurus is characterized by its distinctive orbicular-winged fruits and a trilocular (or bilocular) ovary. Macrofossil records suggested this genus was distributed widely in North America, Europe, and Asia during the Paleogene and Neogene, before its present limitation to Eurasia. In this study, we describe some Paliurus fossil winged fruits from the lower part of Youganwo Formation (middle Eocene) and Huangniuling Formation (late Eocene) of the Maoming Basin, South China. These fruits are recognized as Paliurus favonii Unger based on a detailed study on the fossil morphology and cuticle characteristics. This represents the earliest occurrence of Paliurus fossil fruits in eastern Asia, and to date is the world’s lowest latitude appearance for this genus. The most ancient records of Paliurus throughout the world are from the middle Eocene of North America and the late Eocene of Japan, leading some researchers to conclude the Paliurus may have originated in North America. Molecular data, however, do not support this hypothesis. The present Paliurus fossil fruits provide new evidence for the origin and phytogeographic history of this genus.     

Earthquake Potential in the Zagros Region,Iran

Seismic strain and b value are used to quantify seismic potential in the Zagros region (Iran). Small b values (0.69 and 0.69) are related to large seismic moment rates (9.96×10¹⁷ and 4.12×10¹⁷) in southern zones of the Zagros, indicating more frequent large earthquakes. Medium to large b values (0.72 and 0.92) are related to small seismic moment rates (2.94×10¹⁶ and 6.80×10¹⁶) in middle zones of the Zagros, indicating less frequent large earthquakes. Small b value (0.64) is related to medium seismic moment rate (1.38×10¹⁷) in middle to northern zone of the Zagros, indicating frequent large earthquakes. Large b value (0.87) is related to large seismic moment rate (2.29×10¹⁷) in northwestern zone, indicating more frequent large earthquakes. Recurrence intervals of large earthquakes (M > 6) are short in southern (10 and 14 years) and northwestern (13 years) zones, while the recurrence intervals are long in the middle (46 and 114 years) and middle to northern (25 years) zones.