辽宁抚顺东部地区前寒武纪构造变形及其演化

研究区在前寒武纪发生了鞍山和吕梁两个变形旋面，其中鞍山变形旋回包括三个塑性程度不同的变形幕。而吕粱变形旋回只有一个脆－弱塑性变形幕，四个变形幕的依次形成反映变形作用呈现由深部层次向中浅部层次转变的一种演化序列。变形旋回，变形幕，地质事件，构造演化     

大连地区南北向剪切滑褶变形

大连地区经历了漫长而又特殊的地质构造演化过程，自中生代以来，全区处于活动大陆边缘环境，并遭受多期构造变形事件的影响，其中大规模南北向剪切滑褶变形为资产发现并确定，其为区内众多变形事件中规模最大、影响最广的一期构造事件，本文在详细的地质调查基础上，初步研究分析了研究区南北向剪切滑褶变形的构造-岩石组合特征及变形模式，并就变形动力学背景及变形时代进行了探讨。     

桂东南那卜地区古生代变质岩系的构造演化序列

桂东南那卜地区古生代变质岩系，主要由花岗质岩石（宁潭超单元）和古生界组成。岩石构造变形强烈，构造形迹复杂，根据不同尺度上观察到的各种构造的几何学、运动学、构造应力场以及相互叠加关系等特征，可将其组成不同的构造组合（群落）。依据各构造组合之间的相互关系、同位素年龄，并结合相应的变质事件和岩浆活动事件等，建立起2个旋回和4个世代的构造变形序列。并初步探讨了古生代变质岩系的构造演化过程。     

江西九岭中元古代地层变形变质特征及其演化序列

江西九岭地区位于扬子板块东南部，发育的中元古代地层为一大套以砂泥质为主、含少量火山物质的复理石建造。经历了多期变形变质作用，在地质体中留下了丰富的地质事件信息。本文对这些信息进行了综合分析，阐述了它们的基本特征，探讨其内在联系和相互关系及其演化过程，主要论述了褶皱变形构造、韧性剪切带、脆性变形构造、构造变形与变质作用的关系。在此基础上，将其变形变质事件的演化序列划分为：四堡一晋宁变形变质构造期，加里东变形变质构造期，海西─印支─燕山─喜山变形变质构造期。     

安徽寿县新元古界一个滑塌-滑脱软沉积物变形复合构造的发现及地质初探

安徽寿县新元古界四十里长山组底部粉砂岩层中发现了一个滑塌-滑脱软沉积物变形复合构造,剖面观察显示,该沉积变形构造经历了滑塌变形、滑脱变形、震动液化变形等3次以上的变形过程,很好地保存了原始沉积面貌和沉积变形特征;分析该沉积变形构造的成因,发现变形构造属于软沉积物变形构造类型,形成于浅海陆棚边缘斜坡相带。引起软沉积物变形的动力是地震事件产生的多次震动波作用,造成软沉积物滑塌、滑脱褶皱、震动液化泄水等变形作用,形成了具有复杂变形特征的软沉积物变形复合体,是一次地震事件多次地震活动的沉积记录。     

南京湖山地区方解石晶内变形的发现及其构造意义

在印支晚期－燕山早期近南北向挤压褶皱与自南页北的构造推覆体制下，南京湖山地区出现了三个与逆掩推覆有关的构造变形事件。最初的构造变形表现为重结晶方解石颗粒的晶内变形，依据方解石双晶化密度计算了作用于汤－仑推覆体上的古构造差异应力为２５．６４ＭＰａ。     

灵山岛早白垩世软沉积物变形构造触发机制及其古环境意义探讨

灵山岛早白垩灵山岛组发育丰富的软沉积物变形构造。野外踏勘船厂、灯塔和千层崖三个剖面,根据沉积外观可分为变形层段和非变形层段两个部分。软沉积物变形构造在变形层段和非变形层段均有发育。其中,变形层段中可见褶皱变形、变形层理及大型负载构造。非变形层段可见火焰构造、同沉积布丁构造和同沉积微断层。研究发现,变形层段软沉积物变形构造尺度大(厚度可至十多米,长度可至数百米),侧向连续性好;非变形层段软沉积物变形构造尺度小(厚度仅几个厘米),侧向连续性差。且变形层段和未变形层段厚度统计数据表明,变形层段软沉积物变形构造与砂岩厚度无必然联系,而非变形层段软沉积物变形构造多出现在粒序砂岩层底部或旋回砂岩层变厚过程中。沉积环境表明,非变形层段和变形层段为一深水低角度斜坡沉积产物。软沉积物变形构造发育形态和数量受到斜坡地形的控制。结合沉积环境及沉积特征分析,认为变形层段软沉积物变形构造触发机制为地震,而非变形层段软沉积物变形构造触发机制为负载作用。锆石测年数据表明灵山岛组与上覆流纹岩沉积时间相近,因此地震活动可能与岩浆侵入或早期火山喷发活动相关。此外,汇总早白垩世重要事件,发现灵山岛组沉积、变冷事件、恐龙迁移、海平面变化和同位素偏移具有时间一致性,因此推断这些事件可能共同对应了早白垩世一次与火山活动相关的短期灾难性事件(如早白垩世缺氧事件)。     

琼西南千家地区地层的变形变质特征及划分

根据地层的变形变质特征，将琼西南千家地区的地层（狭义的）划分为岩石地层、构造地层及构造岩层3个系列。从各类地层的变形变质特征来看，该地区至少发生过6次重大地质事件。     

江西九岭中元古代地层变形变质特征及其演化序列

江西九岭地区位于扬子板块东南部，发育的中元古代地层为一大套以砂泥质为主，含少量火山物质的复理石建造。经历了多期变形变质作用，在地质体中留下丰富的地质事件信息。本文对这些信息进行了综合分析，阐述了它们的基本特征，探讨其内在联系和相互关系及其演化过程，主要论述了褶皱变形构造，韧性剪切带，脆性变形构造，构造主形与变质作用的关系。     

一种新的构造变形热年代学研究方法——显微构造变形热年代学

显微构造变形热年代学是一种新兴的研究构造变形热年代学方法,能够解决一些常用方法无法解决的或很困难的构造问题。显微构造变形热年代学利用因构造变形事件而产生的新生矿物结晶年龄来测定小至一般的构造变形,大至区域构造乃至造山带或碰撞带构造变形的年龄,建立构造演化时间序列,并可以计算其变形速率或隆升速率。     

Paleozoic Accretion-Collision Events and Kinematics of Ductile Deformation in the Eastern Part of the Southern-Central Tianshan Belt, China

The Tianshan range could have been built by both late Early Paleozoic accretion and Late Paleozoic collision events. The late Early Paleozoic Aqqikkudug-Weiya suture is marked by Ordovician ophiolitic melange and a Silurian flysch sequence, high-pressure metamorphic relics, and mylonitized rocks. The Central Tianshan belt could principally be an Ordovician volcanic arc; whereas the South Tianshan belt, a back-arc basin. Macro- and microstructures, along with unconformities, provide some kinematic and chronological constraints on 2-phase ductile deformation. The earlier ductile deformation occurring at ca. 400 Ma was marked by north-verging ductile shearing, yielding granulite-bearing ophiolitic melange blocks and garnet-pyroxene-facies ductile deformation, and the later deformation, a dextral strike-slip tectonic process, occurred during the Late Carboniferous-Early Permian. Early Carboniferous molasses were deposited unconformably on pre-Carboniferous metamorphic and ductilely sheared rocks, implying t     

桐柏-大别南缘变质流体变质-变形特征及构造意义

前人研究认为桐柏山主要是由桐柏核部杂岩单元组成,它是一个早白垩世花岗质片麻岩杂岩体,其中包含一定的三叠纪中高级变质岩石,后期一起经历相同的构造变形过程,在南北两侧形成剪切旋向完全相反的两条大型韧性剪切带,殷店-马垅剪切带就是南边的华南板块由SSE→NNW挤压作用下,在斜切大别造山带的方向上产生的右行平移断裂带。在野外进行地质考察的过程中,发现在该地区变质流体的分布具有一定的规律。因此,本文通过对殷店-马垅剪切带地质特征、走滑性质、糜棱岩及糜棱岩化岩石的变质变形,剪切带内长英质脉体物质组成、变形特征及物质来源等方面研究,探讨剪切带中变质流体的分布规律以及变质变形与变质流体之间的关系。     

Polystage deformation of the Gaoligong metamorphic zone: Structures, 40Ar/39Ar mica ages,and tectonic implications

The Gaoligong metamorphic zone is located southeast of the Eastern Himalayan Syntaxis in western Yunnan, China. The zone is characterized by four stages of deformation (D1–D4). D1 structures record early compressive deformation during the Indosinian orogeny, which formed tight to isoclinal F1 folds of bedding with a penetrative S1 foliation developed parallel to fold axial planes. Mid-crustal horizontal shearing during D2 resulted in overprinting of D1 structures. D1 and D2 structures are associated with granulite facies metamorphism. D3 doming resulted in late crustal thickening and the development of a regional NW–SE trending F3 antiform. Synchronous with or slightly subsequent to D3 deformation, the zone experienced D4 ductile strike-slip shearing, resulting in its exhumation to shallow crustal levels and retrograde metamorphism. Granitic D4 mylonites predominantly yield ⁴⁰Ar/³⁹Ar mica ages of 15–16 Ma, indicating that D4 dextral strike-slip shearing occurred in the Miocene. Weakly deformed leucogranite and protomylonite yield ⁴⁰Ar/³⁹Ar ages of 10–11 Ma, suggesting that ductile strike-slip shearing continued to the Late Miocene. The new ⁴⁰Ar/³⁹Ar data indicate that escape-related deformation along the Gaoligong strike-slip shear zone occurred in the Miocene. In association with recent geophysical studies, and on the basis of the structural, crystal preferred orientation (CPO), and geochronological data presented in this paper, we suggest that the Gaoligong metamorphic zone formed in response to intracontinental transpression in the southeast of Tibet, characterized as intense deformation and metamorphism at middle–upper crustal levels.     

新疆中天山北缘胜利达坂韧性剪切带

胜利达坂韧性剪切带沿中天山构造带北缘呈近EW向展布,为一条由一系列糜棱岩带、强片理化带及典型韧性变形显微构造所组成的强应变带。根据变形强度和原岩类型可划分出不同的构造带。显微构造的运动学和动力学分析表明,剪切带经历了早期的由南向北的斜冲推覆剪切及晚期的近水平右行走滑剪切。剪切带内发生了强烈的硅化、碳酸盐化、黄铁矿化、绢云母化和绿泥石化等蚀变,它们与金矿成矿作用关系密切。     

Palaeozoic late collisional strike-slip deformations in Tianshan and Altay, Eastern Xinjiang, NW China

ABSTRACT In Central Asia, thrusts and shear zones resulting from Palaeozoic accretional events were reworked by E–W-trending ductile strike-slip faults during late Palaeozoic–early Mesozoic time. In the Tianshan range, microstructures and quartz C-axis fabrics show a main dextral shearing associated with sinistral localized shear zones. The relationship between these conjugate structures indicates a NNW–SSE-trending bulk shortening. In the Chinese Altay mountains, the existence of δ-type microstructures in an important sinistral mylonitic zone infers high rates of deformation. This shear zone is bordered by a late dextral ductile fault synchronous with a granite emplacement. Field evidence and datings from the literature provide chronological constraints. In the late Carboniferous, the sinistral mylonitic deformation took place in the Erqishi–Irtysh shear zone in the northeastern part of Xinjiang and in Kazakhstan. During the Early Permian, a regional dextral event occurred in the Tianshan range and under the whole of northern Xinjiang.     

中亚南天山穆龙套型金矿地质背景、成矿特征和找矿策略

中亚南天山是世界上最重要的金矿带,以浅变质含碳质碎屑岩系为容矿岩石的穆龙套型金矿最为发育且规模巨大。将境内外南天山作为整体开展研究,有助于推进中国新疆南天山地区金矿的找矿持续突破。南天山是南天山洋在石炭纪末闭合时在Karakum—塔里木板块北缘形成的褶皱冲断带。南天山地区穆龙套型金矿的容矿地层为一套浅变质、变形强烈的含碳质细碎屑岩建造,对金矿化有明显预富集;区域内的大型韧-脆性变形带,剪切带及相关断裂系统是穆龙套型金矿的控矿构造;金矿区岩浆活动虽然较弱,但岩浆活动与成矿具有紧密的时空联系。矿体呈脉状、板状、透镜状,常以黄铁矿和毒砂为主要载金矿物,围岩蚀变以硅化、黄铁矿化、碳酸盐化最为发育。成矿年龄多为晚古生代,同位素示踪指示成矿流体、硫及成矿金属物质具有壳幔混源特征。"碳质岩系+构造变形+岩浆热液"是穆龙套型金成矿的关键控制因素。按照总体控矿特征,探讨了中国新疆南天山地区穆龙套型金矿床的主要找矿策略。     

云蒙山变质核杂岩抬升过程中伸展拆离和岩浆底辟联合作用的证据

北京地区云蒙山变质核杂岩在白垩纪阶段抬升的早期,伴随着沿四合堂剪切带由北向南的拆离滑脱和大型花岗闪长岩的垂向侵位,晚期变形发生在花岗闪长岩岩基周边及其邻近围岩中,形成云蒙山剪切带,并伴随大量同构造的花岗岩和伟晶岩岩脉灌入。剪切带中所有的岩脉都随时间发生了不同程度的变形,较老的岩脉形成紧闭的圆柱状褶皱,枢纽与剪切带的线理和面理接近平行。岩脉与剪切带中L-S组构的平行化作用主要是由于这种转动的结果。岩脉的成分和长英指数随它们的变形程度发生变化,说明持续的岩浆分异作用与韧性剪切变形是同时发生的。云蒙山剪切带由岩浆底辟引起的上盘岩石重力所驱动,并不断得到同构造侵位岩脉的补充,起到存储和不断改造侵位岩脉的作用。早期伸展体制下形成的四合堂剪切带局部遭受云蒙山剪切带的改造或复合。该地区的岩石、构造和同构造岩脉的变形几何学和运动学证据表明,太古宙结晶基底的抬升是下部岩浆底辟与上部地壳伸展拆离共同作用的结果。     

塔里木盆地库车坳陷中部构造变形样式及分布特征

库车坳陷是塔里木盆地北部一个次级构造单元,受晚新生代陆内造山作用控制,发育典型的挤压冲断构造; 同时,由于古近系和新近系盐层的存在,发育丰富的盐相关构造; 另外,冲断构造各段之间的调节作用还形成了一系列的走滑构造。本文利用最新的2D、3D 地震资料及钻井资料,分析总结了库车坳陷中部的变形样式及分布特征。研究结果表明: 1)根据变形的成因机制,将库车坳陷的构造变形划分为收缩构造、盐构造及走滑构造。2)收缩构造以逆冲断层及褶皱样式为主,盐上构造层可划分为断层相关褶皱和褶皱相关断层,其中断层多在盐层内滑脱。盐下构造层根据断层组合方式可划分为叠瓦状冲断构造、楔形冲断构造及滑脱冲断构造。盐构造可以划分为盐席、盐墙、盐楔入、盐刺穿及盐拱构造。走滑构造在剖面上可见花状构造及不协调变形,平面上则可见雁列褶皱、马尾断层及海豚效应。3)收缩构造及盐构造主要分布于克拉苏构造带及秋里塔格构造带内,自南天山至盆地中心,盐下构造层由叠瓦状冲断构造过渡至滑脱冲断构造,过渡带内则发育楔形冲断构造; 走滑构造集中于坳陷西部的阿瓦特-却勒构造段以及东部的克拉3-东秋8构造段。     

滇西高黎贡剪切带内花岗质糜棱岩LA-ICP-MS锆石U-Pb年龄及其构造意义

滇西高黎贡剪切带内花岗质糜棱岩LA-ICP-MS锆石U-Pb年龄及其构造意义     

Zircon Dating and Geological Implications of Granitic Gneiss in the Metamorphic Zone of Gaoligong Mountains in Western Yunnan, China

The general classification of intermediate-acid intrusive rocks in the metamorphic zone of Gaoligong Mountains as one of the metamorphic terranes of Proterozoic Gaoligong Mountains is problematic regarding the intrusion stage and age, as well as the subsequent metamorphism and deformation. In this study, we investigated granitic gneiss in the metamorphic zone of Gaoligong Mountains based on the 1:50,000 regional geological survey of Qushi Street (2011-2013) and SHRIMP U-Pb zircon geochronology. Results showed that the SHRIMP U-Pb zircon dating of granitic gneiss ranged from 163.5±5.7 Ma to 74.0±2.0 Ma. Thus, the granitic gneiss was grouped into orthometamorphic rocks (metamorphic intrusions). The dating data of granite rocks associated with intense metamorphism and deformation were divided into three groups, 163.5±5.7 to 162.3±3.1 Ma, 132.2-101.0 Ma and 99.4±3.5-74.0±2.0 Ma, which respectively represented three independent geologic events including an important magma intrusion with superimposed metamorphic effects in the late Middle Jurassic, regional dynamic metamorphism and superimposed reformation of fluid action in the early Cretaceous, and dynamic metamorphism dominated by ductile shear and metamorphism starting from the late Cretaceous.