Quaternary stratal architecture of the Barcelona prodeltaic continental shelf (NW Mediterranean)

The Barcelona continental shelf is part of a 6–20 km wide canyon-bounded shelf located off the city of Barcelona (NE Spain). This study integrates newly acquired high-resolution single channel seismic reflection profiles and available lithological information of the Barcelona shelf to describe its late Quaternary architecture and the role of global glacio-eustatic fluctuations and local factors in its development.

Four major sequence boundaries are identified throughout the seismic dataset. They are tentatively correlated with the four last 4th order (100–120 ka) high-amplitude late Quaternary glacio-eustatic lowstands. Most of the stratigraphic record is formed by falling stage systems tracts with forced-regressive deposits, which confers a general progradational vertical stacking pattern. Transgressive systems tracts are represented by continuous units confined directly off river sources and on previously eroded surfaces. Stillstand deposits are difficult to recognize in the available dataset. The uppermost seismic unit corresponds to the Holocene shore-parallel Besos and Llobregat joint prodelta affected by the prevailing south-westward circulation.

The general architecture of the late Quaternary Barcelona shelf deposits is determined by global glacio-eustatic cycles. However, the lateral variability of the seismic units depends largely on local factors such as (i) the position of sediment sources (essentially the Llobregat River); (ii) differential subsidence and, especially, sediment compaction; (iii) erosive processes such as canyon incision, mass wasting or wave base dynamics; and (iv) underlying geomorphic restrictions.     

Genesis of the Northern Adriatic Sea (Northern Italy) since early Pliocene

The Northern Adriatic Sea is a shallow and very flat shelf area located between the northern Apennines, the southern Alps and the Dinarides; its present day physiography is the result of the filling of a relatively deep Quaternary foredeep basin, developed due to the northeastward migration of the Apennine chain. Multichannel seismic profiles and well data have allowed documenting the stratigraphic architecture, the depositional systems and the physiographic evolution of the Northern Adriatic sea since early Pliocene time. In particular, three main depositional sequences bounded by regional unconformities were recognized. The Zanclean Sequence 1 documents first the drowning of late Messinian incised valleys and then the southward progradation of a shelf-slope system, which is inferred to be related to a tectonic phase of the Apenninic front. The Piacenzian-Gelasian Sequence 2 records a relatively rapid transgressive episode followed by minor southward progradation; the top of the sequence is associated with a major late Gelasian drowning event, linked to the NE-ward migration of the Apennine foredeep. The Calabrian to upper Pleistocene Sequence 3 testifies the infilling of accommodation previously created by the late Gelasian drowning event, and it initially accumulated in deep-water settings and then in shallow-water to continental settings. The upper part of Sequence 3, consisting of the paleo-Po deltaic system, is composed of seven high-frequency sequences inferred to record late Quaternary glacio-eustatic changes. These high-frequency sequences document the stepwise filling of the remaining accommodation, resulting in the development of the modern shelf.     

Seismic architecture and seismic geomorphology of heterozoan carbonates: Eocene-Oligocene,Browse Basin,Northwest Shelf,Australia

Seismic characterization of Eocene-Oligocene heterozoan carbonate strata from the Browse Basin, Northwest Shelf of Australia, defines marked progradation of nearly 10 km. Stratal terminations and stacking subdivide the succession into mappable seismic units. Stratal architecture and seismic geomorphology varies systematically through the succession.Individual surfaces, discerned by toplap, onlap, and truncation, outline sigmoidal to tangential oblique clinoforms with heights of ranging from 350 to 650 m and maximum gradients between 8 and 18°. Sigmoidal clinoforms can include aggradation in excess of ∼200 m, prograde more than 500 m, and have slopes characterized by inclined, wavy to discontinuous reflectors that represent ubiquitous gullies and channels. In contrast, the overlying tangential oblique clinoforms include downstepped shelf margins, limited on-shelf aggradation (<100 m) and toplap, subdued progradation (<500 m), and continuous parallel inclined reflectors on the slope. Wedges of basinally restricted reflectors at toe of slope onlap surfaces of pronounced erosional truncation or syndepositional structural modification. The succession includes repeated patterns of seismic units that onlap, aggrade, and prograde, interpreted to represent sequence sets and composite sequences.The associations of shelf aggradation, shelf-margin progradation, and slope channeling within sigmoidal seismic units and the less marked progradation and channeling within tangential oblique seismic units contrast with the classic sequence model in which sediment delivery to the slope and pronounced progradation is favored by limited shelf accommodation. This distinct divergence is interpreted to reflect the prolific heterozoan production across the shelf during periods of rising and high base level when the shelf is flooded, perhaps enhanced by downwelling. Comparison with purely photozoan systems reveals similarities and contrasts in seismic stratigraphic heterogeneity and architecture, interpreted to be driven by distinct characteristics of heterozoan sedimentary systems.     

Stratigraphic evolution of Eocene clinoforms from northern Santos Basin,offshore Brazil: Evaluating controlling factors on shelf-margin growth and deep-water sedimentation

In order to assess the controlling factors on the evolution of a shelf margin and the timing of sediment transfer to deep waters, a seismic stratigraphic investigation was carried out in the Eocene interval of northern Santos Basin, offshore Brazil. The studied succession configures a complex of prograding slope clinoforms formed in a passive margin and encompasses five seismic facies and their respective depositional settings: shelf-margin deltas/shorefaces, oblique slope clinoforms, sigmoidal slope clinoforms, continental to shelfal deposits and mass-transport deposits. These are stratigraphically arranged as seven depositional sequences recording a total shelf-edge progradation of about 35 km and a progradation rate of 1,75 km/My. Two main types of sequences can be recognized, the first one (type A) being dominated by oblique slope clinoforms and shelf-margin deltas/shorefaces in which shelf-edge trajectories were essentially flat to descending and extensive sandy turbidites were deposited on the foreset to bottomset zones. Sequences of this type are dominated by forced-regressive units deposited during extensive periods of relative sea-level fall. Type B comprises an upper part represented by aggradational shelfal deposits and a lower part composed of mass-transport deposits and high-relief sigmoidal clinoforms with descending shelf-edge trajectory. Steep slump scars deeply cut the shelfal strata and constitutes the boundary between the two intervals observed in type B sequences. Sandy turbidites occur at the same frequency in both forced- and normal-regressive units but are more voluminous within forced-regressive clinoforms associated with shelf-margin deltas/shorefaces. Major slope failures and mass-transport deposits, by the other hand, occurred exclusively in type B sequences during the onset of sea-level fall and their volume are directly related to the thickness of the shelfal sediments formed during the pre-failure normal regressions.     

Late Pleistocene–Holocene seismic stratigraphy of Nha Trang shelf,central Vietnam

The late Pleistocene–Holocene stratigraphic architecture on the steep and narrow shelf off Nha Trang, central Vietnam has been explored by high resolution seismic profiles integrated with sediment core data. Sequence stratigraphic results reveal five major seismic units and three bounding surfaces which are composed of two distinctive sequences. Those sequences are bounded by two regional unconformities (SB1, SB2) which have been formed in respond to different sea-level regimes. The revealed relict beach–ridge deposits at water depth of about ∼130 m below the present water depth indicate that the Last Glacial Lowstand (LGM) sea-level in this area was lower than in neighboring areas and it probably resulted from subsidence due to high sedimentation rate and/or neotectonic movements of the East Vietnam Fault System. The late Pleistocene high amplitude of sea-level change during a long fourth-order and superimposed by shorter fifth-order cycle is the principal factor in reorganizing the formation of the Nha Trang continental shelf sequence. Other local controlling factors as fluctuations in sediment supply, morphological variations of the LGM surface, subsidence rate and hydrodynamic conditions provided the distinctive features of the Nha Trang shelf sequence stratigraphic model in comparison with neighboring other areas.     

南海曾母盆地南部陆架边缘三角洲沉积特征

曾母盆地作为发育于古巽他陆架上的盆地,南部的古巽他河所携带的巨量沉积物和曾母盆地的陆架特征使得陆架边缘三角洲在曾母盆地南部发育成为必然。通过对曾母盆地中中新世以来陆架边缘三角洲的地震、钻井及进积特征分析,认为曾母盆地内陆架边缘三角洲的沉积形态呈分别向陆和向海减薄的楔形体,古巽他河携带多期次的沉积物向陆坡沉积过程中形成多套沉积复合体,这些沉积体由于具有良好的生储条件,因而具有重要的油气勘探价值。     

Sequence architecture and depositional evolution of the Late Miocene to quaternary northeastern shelf margin of the South China Sea

Based on an integrated analysis of seismic, well logging and paleontological data, the sequence architecture and depositional evolution of the northeastern shelf margin of the South China Sea since Late Miocene are documented. The slope deposits of the Late Miocene to Quaternary can be divided into two composite sequences (CS1 and CS2) bounded by regional unconformities with time spans of 3–7 Ma, and eight sequences defined by local unconformities or discontinuities with time spans of 0.8–2.3 Ma. Unconformities within CS1 feature shelf-edge channel erosion, while in CS2 they form truncations at the top of the shelf margin as prograding complexes and onlap contacts against the slope.Depositional systems recognized in the slope section include unidirectionally migrating slope channels, slope fans or aprons, shelf-edge deltas and large-scale slope clinoforms. CS1 (Late Miocene to Pliocene) is characterized by development of a series of shelf-margin channels and associated slope fan aprons. The shelf-margin channels, oriented mostly NW-SE, migrate unidirectionally northeastwards and intensively eroded almost the entire shelf-slope zone. Two types of channels have been identified: (1) broad, shallow and unconfined or partly confined outer-shelf to shelf-break channels; and (2) deeply incised and confined unidirectionally migrating slope channels. They might be formed by gravity flow erosion as bypassing channels and filled mostly with along-slope current deposits. Along the base of the shelf slope, a series of small-scale slope fans or fan aprons are identified, including three depositional paleo-geomorphological elements: (1) broad or U-shaped, unconfined erosional-depositional channels; (2) frontal splays-lobes; and (3) non-channelized sheets. CS2 (Quaternary) consists mainly of a set of high-angle clinoforms, shelf-margin deltas and lower slope unidirectionally migrating channels.The relative sea level changes reflected in the sequence architecture of the study area are basically consistent with Haq's global sea level curve, but the development of regional unconformities were apparently enhanced by tectonic uplift. The development of high-angle (thick) clinoforms in the Quaternary may be attributed to a high sediment supply rate and rapid tectonic subsidence. The formation of the unidirectionally migrating channels appears to have resulted from the combined effects of the northeastward South China Sea Warm Current (SCSWC) and downslope gravity flow. The formation of the slope channels in the outer-shelf to shelf-break zone may be predominately controlled by bottom current, whereas those developed along the middle to lower slope zone may be dominated by gravity flow.     

Seismo-stratigraphic evidences for deep base level control on middle to late Pleistocene drift evolution and mass wasting along southern Levant continental slope (Eastern Mediterranean)

Since early Pliocene, a counterclockwise surface gyre transported Nile derived silt and clay northeastwards along the Levant coast, where a basinward prograding plastered drift emerged. Based on high-resolution seismic reflection data we develop a middle to late Pleistocene sequence stratigraphic scheme for this plastered drift. For creating stacked sections of the seismic data we used the common reflection surface (CRS) stack technology which enhanced lateral reflection continuity and visibility of deep reflections. The shelf comprises stratigraphic sequences which show classical, systems tract like stacking patterns of sea level controlled sequences such as offlapping forced regression deposits or diachronous ravinement surfaces which formed during base level rise. On the slope, base level was periodically located well below the wave base and thus rather controlled by hydrodynamics, presumably by high-velocity contour currents. Hence, the term ‘deep base level’ is introduced. The deep base level controlled especially down and backstepping slope deposits. This example shows that care has to be taken when interpreting subsurface data containing typical systems tract like seismic sequences, since such geometries do not necessarily imply shallow water deposition of the sediments. A chronostratigraphic analysis based on the seismic stratigraphy indicates that base level fluctuations were related to eccentricity driven glacio-eustatic fluctuations. Periodic mass wasting, facilitated by foreset over-steepening and possibly triggered by salt tectonics or erosion by the contour current occurred during late base level fall or early base level rise.     

Sedimentary evolution of the northwestern Alboran Sea during the Quaternary

Five depositional bodies occur within the Quaternary deposits of the northwestern Alboran Sea: Guadalmedina-Guadalhorce prodelta, shelf-edge wedges, progradational packages, Guadiaro channel-levee complex, and debris flow deposits. The sedimentary structure reflects two styles of margin growth characterized: 1) by an essentially sediment-starved outer, shelf and upper slope and by divergent slope seismic facies; 2) by a prograding sediment outer shelf, and parallel slope seismic facies. Eustatic oscillations, sediment supply, and tectonic tilting have controlled the type of growth pattern, and the occurrence of the depositional bodies. Debris flows were also controlled locally by diapirism.     

陆架边缘三角洲的研究现状及其意义

陆架边缘三角洲主要发育于陆架和陆坡之间,由物源越过陆架坡折快速在陆坡堆积而形成,物源因素是其生长进积的主要因素。由于陆架边缘三角洲在陆架边缘附近具有最大的沉降速率因而使得其在平面主要呈弓形或新月形状,纵向剖面上向海和向陆各出现一个楔形斜坡体。加强对陆架边缘三角洲的研究,对于寻找深海陆坡低位扇,进而寻找有利油层储集体具有重要意义。     

Interaction between diapirism and sediment loading at the shelf-slope boundary,northwest Gulf of Mexico

During the last low stand of sea level, rivers and streams drained across the present northwestern Gulf of Mexico continental shelf depositing sediments in several shallow-water deltas near the present shelf-slope boundary. The weight of these wedges of prograded sediments triggered or augmented both subsidence of local depositional basins and upward movement of diapiric material around the basin edges. A depositional basin off the southwestern Louisiana coast records migration of the basinal axis during late Pleistocene and Holocene time indicating relative growth of diapirs along the basin margin throughout the most recent geological record.     

Late Pleistocene-Holocene sediments on the Spanish continental shelves: Model for very high resolution sequence stratigraphy

Sequence stratigraphy analysis of high resolution seismic profiles (Geopulse, Uniboom and 3.5 kHz) of late Pleistocene-Holocene sediments has been carried out on five sectors of the Spanish continental margin. Four types of depositional settings are distinguished in these sectors: (1) low subsident ramps (Alborán Margin-Cádiz Gulf); (2) high subsident (2m/kyr) ramps (Alicante-Valencia); (3) “Ria”-type morphology on the Atlantic passive margin (Ria de Muros); and (4) fault-scarp morphology systems with subsidence (Balearic Margin). A Type 1 sequence is interpreted in all these sectors, being composed of lowstand systems tract, transgressive systems tract and highstand systems tract. This conforms to the basic concepts of sequence stratigraphy and each systems tract correlates with a particular part of the last eustatic hemicycle. Characteristic shelf features such as terraces, terraces with beach deposits and progradational sediment wedges evidence a complex stacking of lesser sub-sequences in all the systems tracts, which must be related to very-short period sea-level stillstands and fall. We propose a very high resolution sequence stratigraphy model in which the last sea-level hemicycle is punctuated by: “P” cycles (4500 years), which give rise to the neo-glacial events; “h” cycles (2200-950 years), and “c” cycles (500-50 years). These cycles interact with each other, thus establishing the placing of the high and low sea levels.

This attention to detail: (1) explains sedimentary evolution on both the shelf and upper slope during late Pleistocene-Holocene time; (2) illustrates some departures from the classical sequence stratigraphy model; and (3) also demonstrates that the late Pleistocene-Holocene eustatic curve is not one simple transgression but is modulated by three differing-period cycle groups below the Milankovitch band. Our model is delimited by fluctuating sea level during Pleistocene-Holocene times. Such features should be identifiable on any continental margin. However, localized features occur due to subsidence and continental shelf morphology which determ ine the location and depth of sedimentary bodies generated in each eustatic cycle.     

High resolution seismic profile through a Late Cenozoic delta complex in the southern North Sea

A digitally recorded and processed multichannel seismic profile between Cromer (England) and Sylt (Germany) has provided the first continuous section through the Miocene to Middle Pleistocene delta complex of the southern North Sea Basin. The profile depicts the progressive westward expansion of deltaic sedimentation that eventually filled in this gently subsiding epicontinental basin. Significant basinward shifts in seismic facies occur above all but one of 14 seismic sequence boundaries that punctuate the deposition of up to 830 m of deltaic sediments on the profile. These sequence boundaries and the morphology of prodelta, delta front, delta top and fluvio-deltaic seismic facies record the interaction between subsidence, cyclic fluctuation in sediment supply to, and cyclic change of relative sea level within the basin. Two submarine slides were developed within delta front facies in the Pliocene section and the profile has intersected a swarm of Elsterian (Middle Pleistocene) glacial palaeovalleys that have been incised into the upper part of the delta complex.     

Postglacial floodings of the Marmara Sea: molluscs and sediments tell the story

The early Holocene marine flooding of the Black Sea has been the subject of intense scientific debate since the “Noah’s Flood” hypothesis was proposed in the late 1990s. The chronology of the flooding is not straightforward because the connection between the Black Sea and the Mediterranean Sea involves the intermediate Marmara Sea Basin via two sills (Dardanelles and Bosphorus). This study explores the chronology of late Pleistocene–Holocene flooding by examining sedimentary facies and molluscs from 24 gravity cores spanning shelf to slope settings in the southern Marmara Sea Basin. A late Pleistocene Ponto-Caspian (Neoeuxinian) mollusc association is found in 12 of the cores, comprising 14 mollusc species and dominated by brackish (oligohaline–lower mesohaline) endemic taxa (dreissenids, hydrobiids). The Neoeuxinian association is replaced by a Turritella–Corbula association at the onset of the Holocene. The latter is dominated by marine species, several of which are known to thrive under dysoxic conditions in muddy bottoms. This association is common in early Holocene intervals as well as sapropel intervals in younger Holocene strata. It is an indicator of low-salinity outflows from the Black Sea into the Marmara Sea that drive stratification. A marine Mediterranean association (87 species) represents both soft bottom and hard substrate faunas that lived in well-ventilated conditions and upper mesohaline–polyhaline salinities (ca. 25 psu). Shallower areas were occupied by hard substrate taxa and phytopdetritic communities, whereas deeper areas had soft bottom faunas. The middle shelf part of the northern Gemlik Gulf has intervals with irregular and discontinuous sedimentary structures admixed with worn Neoeuxinian and euryhaline Mediterranean faunas. These intervals represent reworking events (slumping) likely related to seismic activity rooted in the North Anatolian Fault system. The core data and faunas indicate an oscillating postglacial sea-level rise and phases of increased/decreased ventilation in the Marmara Sea during the Holocene, as well as palaeobiogeographic reorganisations of Ponto-Caspian and Mediterranean water bodies since the latest Pleistocene (<30 ka). The findings contribute to arguments against a single catastrophic flooding of the Black Sea at about 7.5 ka (Noah’s Flood).     

Sedimentology and depositional architecture of a submarine delta-fan complex in the Durban Basin,South Africa

The seismic stratigraphy, evolution and depositional framework of a sheared-passive margin, the Durban Basin, of South East Africa are described. Based on single-channel 2D seismic reflection data, six seismic units (A-F) are revealed, separated by major sequence boundaries. These are compared to well logs associated with the seismic data set. Internal seismic reflector geometries and sedimentology suggest a range of depositional regimes from syn-rift to upper slope and outer shelf. Nearshore and continental facies are not preserved, with episodic shelf and slope sedimentation related to periods of tectonic-induced base level fall. The sedimentary architecture shows a change from a structurally defined shelf (shearing phase), to shallow ramp and then terminal passive margin sedimentary shelf settings. Sedimentation occurred predominantly during normal regressive conditions with the basin dominated by the progradation of a constructional submarine delta (Tugela Cone) during sea-level lowstands (LST). The earlier phases of sedimentation are tectonic-controlled, however later stages appear to be linked to global eustatic changes.     

3D architecture of Quaternary sediment along the NW Atlantic Moroccan Rharb continental shelf: A stratal pattern under the dual control of tectonics and climatic variations

This study focuses on the evolution of the Atlantic NW Moroccan Rharb continental shelf during the Neogene and Quaternary. This region is part of a foreland basin bounded by the Rif mountain belt and thus provides an interesting geological setting to study the interactions between eustasy and tectonics and the driving mechanisms controlling stratigraphic patterns. The results are supported by an interpretation of new data including high-resolution seismic lines coupled with an interpretation of industrial seismic lines and detailed logs of industrial wells completed by micropaleontologic analysis of cuttings. The stratigraphy reveals a succession of three mega sequences related to the transition from an underfilled to an overfilled stage reflecting the long-term evolution of the foreland system. Moreover, evidence of cyclical sea-level changes are visible in the upper megasequence composed of three depositional sequences assumed to be fourth-order sequences generated in response to the most recent 100-ka glacio–eustatic cycles. This study also shows the peripheral deformation of the Rharb shelf responsible for changes in the geometry of the deposits and thicknesses of the sedimentary fill during the Pliocene and Pleistocene. The most important change was triggered by the uplift of the Lallah Zahra Ridge corresponding to a major Quaternary kinematic boundary and the broad uplift of the southern shelf interpreted as a flexural uplift of the forebulge domain. The deformation-controlled sediment dispersal pattern consists of a progressive growth of the shelf accompanied with a progressive shift of depocenters from the North East to the South West and a general progradation to the North West along the southern border. This progressive filling has led to the confinement of the Rharb paleo-valley across the continental shelf. The complete filling of the palaeo-valley was followed by the development of a more than 70-m thick prodeltaic lobe at the front of the Oued Sebou river mouth during the Holocene.     

Late Cenozoic prograding wedges on the NW European continental margin: their formation and relationship to tectonics and climate

During late Pliocene to Pleistocene times, prominent prograding wedges were deposited along the continental margin of NW Europe, resulting in seaward shelf break migration of up to 150 km. Much of the sediment accumulation occurred marginal to the former mid- to high-latitude ice sheets. The geographical distribution, and stratigraphical and chronological data may suggest that the instigation of the wedges was variously related to tectonic uplift as well as a response to the late Pliocene to Pleistocene climate deterioration and onset of major northern hemisphere glaciations. The onset of wedge growth on the NW UK and Irish margins was initiated at about 4 Ma in response to tectonic tilting of the margin in that region. However, glacially derived sediments here comprise a significant proportion of the wedges, especially since 0.44 Ma. For the Faroe margin, no detailed chronology is available; however, it may be inferred that onset of glacigenic wedge growth here did not post-date that observed on the NW UK and Irish margins. Offshore Norway, wedge growth has largely occurred since ca. 2.7 Ma in response to northern hemisphere glaciations, also recording a major change in sediments transport routes at 0.8–1.1 Ma (reflecting larger Fennoscandian Ice Sheets). Presently, it is uncertain whether the glacigenic wedge growth was preceded by a fluvial phase (in response to uplift) in this area. In the western Barents Sea, an early phase of wedge growth was (glacio) fluvial in character. Off western Spitsbergen, the development was similar to that of the Barents Sea although the glacigenic wedge-growth phase may have started somewhat earlier.The wedges commonly display gently inclined seaward prograding clinoforms, and transparent to chaotic internal acoustic facies. Sampling of their sediments reveals that they are mainly composed of glacigenic diamicton interbedded with marine and glaciomarine sediments that, to various extents, have been affected by bottom-current action. The clinoforms of these wedges vary in geometry from oblique to sigmoidal, and they also show varying degrees of aggradation throughout their development. The resulting stratal stacking pattern can be attributed to a combination of variations in sediment supply, sedimentary processes, and accommodation space, the latter being a function of tectonic movements and/or loading induced subsidence as well as eustatic sea-level fluctuations.     

Sequence stratigraphy based on high-resolution seismic profiles in the late Pleistocene and Holocene deposits of the Venice area

The sequence-stratigraphic investigation by Very High-Resolution (VHR) seismic profiles allowed recognition of the detailed architecture of the late Pleistocene and Holocene succession of the Venice area. In this way deposits previously known by the analyses of scattered cores, mainly taken along the lagoon margin and the littoral strips, have been correlated at regional scale including the near offshore sector and the result has pointed out the lateral variability of the stratal architecture. Late Pleistocene deposits consist of an aggrading floodplain and fluvial channel fills accumulated during decreasing eustatic sea level, and they are coeval with offlapping forced regressive marine wedges in the Central Adriatic basin. The Holocene sequence is composed of three main seismic units separated by major stratal surfaces. Unit 1 (up to 9 m thick) is formed by channelized deposits separated by areas showing sub-horizontal and hummocky reflectors, and is bounded at the base by a surface that records prolonged conditions of subaerial exposure and at the top by a flatter surface resulting from erosion by marine processes. Deposits of Unit 1 are interpreted as estuarine and distributary channel fills, and back-barrier strata. Unit 2 is well distinguishable from Unit 1 only in the offshore area and at the barrier island bounding the Venice Lagoon, and is composed of a prograding marine wedge (up to 10 m thick) that interacts laterally with ebb tidal deltas. Unit 3 consists of a tidal channel complex and inlet deposits, which testify the evolution of the lagoon area. Tidal channels are entrenched in the lagoon mud flat (coeval with Units 1–2) and cut the Pleistocene–Holocene boundary in several places.Following current sequence-stratigraphic concepts, the Holocene sequence is composed of a paralic transgressive systems tract (TST) (Unit 1) overlying a sequence boundary (the Pleistocene–Holocene boundary) and overlain by a marine highstand systems tract (HST) (Unit 2) in seaward locations and by highstand lagoonal deposits landwards. TST and HST are separated by a downlap surface that is amalgamated with a wave ravinement surface in several places. Unit 3 is coeval with the upper part of Unit 2, and its development has been favoured by human interventions, which led to a transgression limited to the lagoon area.Local factors during the deposition, i.e. subsidence, sediment supply, physiography, and current/wave regimes, led to a significant lateral variability in the architecture of the Holocene sequence, as evidenced by the extreme thickness variation of the TST along both depositional strike and dip. The HST, instead, shows less pronounced strike variations in the stratal architecture. Also, present data clearly evidence that the human impact has a great relevance in influencing the late Holocene sedimentation.     

Sequence stratigraphy of the Miocene section,southern Gulf of Mexico

This study focuses on the interpretation of stratigraphic sequences through the integration of biostratigraphic, well log and 3D seismic data. Sequence analysis is used to identify significant surfaces, systems tracts, and sequences for the Miocene succession.The depositional systems in this area are dominantly represented by submarine fans deposited on the slope and the basin floor. The main depositional elements that characterize these depositional settings are channel systems (channel-fills, channel-levee systems), frontal splays, frontal splay complexes, lobes of debrites and mass-transport complexes.Five genetic sequences were identified and eleven stratigraphic surfaces interpreted and correlated through the study area. The Oligocene-lower Miocene, lower Miocene and middle Miocene sequences were deposited in bathyal water depths, whereas the upper Miocene sequences (Tortonian and Messinian) were deposited in bathyal and outer neritic water depths. The bulk of the Miocene succession, from the older to younger deposits consists of mass-transport deposits (Oligocene-lower Miocene); mass transport deposits and turbidite deposits (lower Miocene); debrite deposits and turbidite deposits (middle Miocene); and debrite deposits, turbidite deposits and pelagic and hemipelagic sediments (upper Miocene). Cycles of sedimentation are delineated by regionally extensive maximum flooding surfaces within condensed sections of hemipelagic mudstone which represent starved basin floors. These condensed sections are markers for regional correlation, and the maximum flooding surfaces, which they include, are the key surfaces for the construction of the Miocene stratigraphic framework. The falling-stage system tract forms the bulk of the Miocene sequences. Individual sequence geometry and thickness were controlled largely by salt evacuation and large-scale sedimentation patterns. For the upper Miocene, the older sequence (Tortonian) includes sandy deposits, whereas the overlying younger sequence (Messinian) includes sandy facies at the base and muddy facies at the top; this trend reflects the change from slope to shelf settings.