中国西南地区二叠纪乐平世陆生生物大灭绝期煤中砷和硒的演化及古环境意义

为了探讨中国西南地区二叠系乐平统(上二叠统)龙潭组中下部煤系不同煤组分中砷、硒的含量和演化及古环境意义,对近10年来采集于中国西南扬子地台的二叠系乐平统龙潭组主采煤层的原煤、亮煤、煤矸石、黄铁矿结核等样品中砷、硒元素含量进行了测定和分析,并与中国华北地台一些煤矿的上石炭统-下二叠统太原组、山西组的原煤、镜煤、亮煤、煤矸石、黄铁矿结核等样品中砷、硒含量进行对比分析。结果表明：西南地区乐平统龙潭组煤的砷、硒含量变化较大,但总体高于华北晚石炭世和早二叠世煤的砷、硒含量;西南二叠系乐平统龙潭组大多数的亮煤中砷、硒含量高于原煤全煤样(刻槽样)中的砷、硒含量,也远远高于同煤层煤矸石的含量,龙潭组部分亮煤的砷含量尤其高,为55～338 mg/kg,还发现砷含量为89 mg/kg的亮煤。但华北上石炭统-下二叠统的镜煤中的砷、硒含量与之相反,低于原煤全煤样的砷、硒含量,其中砷含量非常低,为063～129 mg/kg。说明西南地区上二叠统煤中的砷和硒与煤的有机质密切相关,可能主要来源于成煤古植物。在西南乐平世早、中期第Ⅰ幕陆生生物集群灭绝事件期间,陆生动物的食物--植物中有毒有害元素砷、硒含量明显增加,陆生环境或泥炭沼泽中可溶性砷、硒含量增加。     

The geology, petrology, palynology and geochemistry of Permian coal basins in Tanzania: 2. Songwe-Kiwira Coalfield

This study provides coal quality, petrological, palynological and geochemical (Rock Eval) data on Permian coal seams and associated shales and mudstones of the Karoo Supergroup of the Songwe-Kiwira Coalfield, Tanzania. The coal seams, which have a cumulative thickness of 6.80 m, occur in the shale–coal–sandstone facies of the Mchuchuma Formation of Artinskian to Kungurian(?) age.Coal quality data (calorific values, volatile matter contents) and vitrinite reflectances indicate high volatile C bituminous to high volatile A bituminous coals, having relatively high ash yields (22–49 wt.%) and highly variable sulphur contents (0.17–9.2 wt.%). They could be used to fuel small-scale power generation units thereby providing electricity to nearby towns and villages. Also, the coals could be used as a substitute for wood, which is becoming increasingly scarce. In rural Tanzania, charcoal is still the main energy source for cooking, and wood is used extensively in brick kilns and for making roofing tiles.Petrological analysis indicated that the coals are dominated by dull to banded dull lithotypes, with seams at the base of the Mchuchuma Formation enriched in inertinite macerals (up to 83 vol.%), whereas up-section vitrinite contents increase. Palynological analyses indicated that the assemblage in the lower Mchuchuma Formation (Scheuringipollenites assemblage) is dominated by trilete spores, whereas in the remainder of the section, non-taeniate disaccates dominate (Scheuringipollenites–Protohaploxypinus assemblage). Facies critical macerals suggest for most seams a marsh/wet forest swamp depositional setting, which is consistent with the palynological data.Rock Eval analyses indicate type II/III kerogen, with Tmax (°C) values ranging from 426 to 440, corresponding to the early stage of hydrocarbon generation. Thermal Alteration Indices (2 to 2+) and vitrinite reflectance levels (0.60–0.83 Ro (%) support the Rock Eval maturity assessment, and despite the predominance of terrestrial-derived organic matter, there is evidence of oil generation and expulsion in the form of cavity and fracture filling exsudatinite.     

Determination of elemental affinities by density fractionation of bulk coal samples from the Chongqing coal district, Southwestern China

The occurrence and distribution of major and trace elements have been investigated in two coal-bearing units in the Chonqing mining district (South China): the Late Permian and Late Triassic coals.The Late Permian coals have higher S contents than the Late Triassic coals due to the fixation of pyrite in marine-influenced coal-forming environments. The occurrence of pyrite accounts for the association of a large number of elements (Fe, S, As, Cd, Co, Cu, Mn, Mo, Ni, Pb, Sb, Se, and Zn) with sulphides, as deduced from the analysis of the density fractions. The marine influence is probably also responsible for the organic association of B. The REEs, Zr, Nb, and Hf, are enriched by a factor of 2–3 with respect to the highest levels fixed for the usual worldwide concentration ranges in coal for these elements. The content of these elements in the Late Permian coal is higher by a factor of 5–10 with respect to the Late Triassic coal. Furthermore, other elements, such as Cu, P, Th, U, V, and Y, are relatively enriched with respect to the common range values, with maximum values higher than the usual range or close to the maximum levels in coal. The content of these elements in the Late Permian coal is higher than the Late Triassic coal. These geochemical enrichments are the consequence of the occurrence, in relatively high levels, of phosphate minerals, such as apatite, xenotime, and monazite, as deduced from the study of the density fractions obtained from the bulk coal.The Late Triassic coal has a low sulphur content with a major organic affinity. The trace element contents are low when compared with worldwide ranges for coal. In this coal, the trace element distribution is governed by clay minerals, carbonate minerals, and to a lesser extent, by organic matter and sulphide minerals.Major differences found between late Permian and Triassic coals are probably related to the source rocks, given that the main source rock of the late Permian epicontinental marine basin is the Emeishan basalt formation, characterised by a high phosphate content.     

The petroleum generation potential and effective oil window of humic coals related to coal composition and age

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.     

The application of FAMM (Fluorescence Alteration of Multiple Macerals) analyses for evaluating rank of Paraná Basin coals, Brazil

Combining vitrinite reflectance (VR) and fluorescence alteration of multiple macerals (FAMM) analyses provide insights into the chemical nature of vitrinites (i.e., perhydrous vs. orthohydrous vs. subhydrous compositions) in Permian Gondwana coals of the Paraná Basin, Brazil. The FAMM-derived equivalent VR (EqVR) values and relationships with VR can be determined according to calibration curves based largely on Permian Gondwana coals of eastern Australia.The analytical results indicate that vitrinites in the Paraná Basin coals studied generally range from orthohydrous to perhydrous, with interpreted VR suppression ranging up to 0.2% absolute for the most perhydrous case. The EqVR values of the Santa Catarina coals, which range from about 0.85% to 0.95% differ from VR values by about 0.10–0.15% absolute, potentially having significant implications on coal utilization.The causes of vitrinite reflectance suppression in the Paraná Basin coals are as yet poorly understood, but are likely to be related to a combination of factors.     

Petrographic characteristics and depositional conditions of Permian coals of Pench, Kanhan, and Tawa Valley Coalfields of Satpura Basin, Madhya Pradesh, India

This paper attempts to characterize the coals of Satpura Gondwana basin using a large number of pillar coal samples drawn from the working coal mines of Pench, Kanhan, and Tawa (Pathakhera) Valley Coalfields of this basin. This westernmost Gondwana basin of Peninsular India is graben/half-graben type and occupies an area of 12 000 km² with sedimentary fills (>5000 m) ranging in age from Permian to Cretaceous. The Barakar Formation (Permian) is exclusively coal-bearing with a total coal reserve of nearly 2000 Mt. The results show that the coals of this basin are equally rich in inertinite (22.8–58.7%, 24.5–62.0% mmf basis) and vitrinite (24.4–52.4%, 24.4–56.0% mmf basis). The concentration of liptinite ranges from 8.8% to 23.2% (9.0–26.0% mmf basis). The dominant microlithotypes of these coals are inertite and vitrite with comparatively low concentrations of vitrinertite and clarite. The vitrinite reflectance (Rom% values) suggests that the Pench Valley (0.30–0.58%) coals are subbituminous C to high volatile C bituminous in rank, while the Kanhan and Tawa Valley coals (0.52–0.92%) are subbituminous A to high volatile A bituminous in rank. The localized enhancement of rank in the latter two basins has been attributed to the extraneous heat flow from deep-seated igneous intrusions in the basin. The microlithotype composition of these coals is suggestive of their evolution in limno-telmatic zones, under fluvio-lacustrine control with the development of upper deltaic and lower deltaic conditions near the fresh water lacustrines. The floral input is characteristic of forest swamps with intermittent floods, leading to the development of reed moor and open moor facies, particularly in the Pench Valley basin. The Gelification Index (GI) and Tissue Preservation Index (TPI) are suggestive of terrestrial origin with high tree density. Further, moderately high GI and exceedingly high telovitrinite based TPI along with high ash content, particularly for the coals of Kanhan and Tawa Valley Coalfields, are indicative of the recurrence of drier conditions in the forested swamps. Furthermore, lateral variation in TPI values is indicative of increase in the rate of subsidence vis-à-vis depth of the basin from east to west (Pench to Tawa Valley Coalfield). The Ground Water Index (GWI) suggests that these coals have evolved in mires under ombotrophic to mesotrophic hydrological conditions. The Vegetation Index (VI) values are indicative of the dominance of herbaceous plants in the formation of Pench Valley coals and comparatively better forest input in the formation of Kanhan and Tawa Valley coals.     

Generation and hydrocarbon entrapment within Gondwanan sediments of the Mandapeta area, Krishna-Godavari Basin, India

The discovery of hydrocarbons (mainly gas) in commercial quantities from Gondwanan sediments in the Mandapeta field of Krishna-Godavari Basin, India, provided impetus for intensified exploration in Mandapeta and the adjoining Kommugudem, Draksharama and Endamuru fields. Both oil and gas have been found in the reservoirs of Mandapeta (Triassic) and Golapalli (Early Cretaceous) formations. Mature, localised, basal shales (1.0–1.1% Ro) in the Mandapeta formation have sourced the oils from the Mandapeta Sandstone reservoir (Triassic). The oils being produced from Golapalli Sandstone reservoir (Early Cretaceous) are relatively less mature and have been sourced by the underlying shales in the Mandapeta Formation at a maturity level of 0.80–0.85% Ro. The source and maturity data preclude liquid hydrocarbon sourcing from the Kommugudem (Permian) sequence. Permian coals and shales of the Kommugudem Formation are the major source rocks for gaseous hydrocarbons in this area. The hydrocarbon generation started in Early Cretaceous in the Kommugudem Formation, but the intermittent tectonic activity (with associated structural developments) has resulted in reorientation and redistribution of the then existing trap configurations. The present day maturity level of the Permian sediments in the Mandapeta field is 1.2% Ro or greater, capable of generating gas dominantly. The Raghavapuram shale in the Mandapeta area is adequately mature and has good hydrocarbon potential for oil generation. The probability of finding hydrocarbon reserves in the sands of Raghavapuram shales and other suitable traps is high. Modern seismic information together with geologic models can give new exploration leads.     

Generation and expulsion of oils from Permian coals of the Sydney Basin,Australia

Organic geochemical and petrological assessment of coals/coaly shales and fine grained sediments, coupled with organic geochemical analyses of oil samples, all from Permo–Triassic sections of the Southern Sydney Basin (Australia), have enabled identification of the source for the widely distributed oil shows and oil seeps in this region. The Permian coals have higher hydrogen indices, higher liptinite contents, and much higher total organic matter extract yields than the fine grained sediments. A variety of source specific parameters obtained from n-alkanes, regular isoprenoids, terpanes, steranes and diasteranes indicate that the oil shows and seeps were generated and expelled predominantly from higher plant derived organic matter deposited in oxic environments. The source and maturity related biomarkers and aromatic hydrocarbon distributions of the oils are similar to those of the coals. The oil-coal relationship also is demonstrated by similarities in the carbon isotopic composition of the total oils, coal extracts, and their individual n-alkanes. Extracts from the Permo–Triassic fine grained sediments, on the other hand, have organic geochemical signatures indicative of mixed terrestrial and prokaryotic organic matter deposited in suboxic environments, which are significantly different from both the oils and coal extracts. The molecular signatures indicating the presence of prokaryotic organic matter in some of the coal extracts and oils may be due to thin sections of possibly calcareous lithologies interbedded within the coal measures. The genetic relationship between the oils and coals provides new evidence for the generation and expulsion of oils from the Permian coals and raises the possibility for commercial oil accumulations in the Permian and Early Triassic sandstones, potentially in the deeper offshore part of the Sydney Basin.     

Chalcophile elements in western Canadian coals

Concentrations of chalcophile elements (As, Co, Cu, Hg, Mo, Ni, Pb, Sb and Zn) in western Canadian coals were determined using INAA and AAS. The concentrations of these elements in western Canadian coals are within the range for most world coals. However, there are some high values for coals from outcrops and from areas which are not currently being mined.Arsenic content in the majority of western Canadian coals, particularly those currently being mined, is low (0.2–3 ppm). However, there are coals with high arsenic content; for example, lignites from Hat Creek A zone contain between 4.0 and 14.0 ppm As. In some samples from Comox and Suquash, the As concentration is as high as 240 ppm and 1400 ppm, respectively. The enrichment of As in high arsenic coals is related to the geology and nature of country rocks associated with the coal seams. The concentration of other elements for most western Canadian coals, particularly those being mined, are within the range for most world coals. In these coals, the concentration ranges (in ppm) of chalcophile elements are 0.3-3.6 for Sb, 0.8-4.6 for Co, 7–35 for Cu, <0.1 for Hg, 2–6 for Mo, 4–94 for Ni, 6–22 for Pb, 2–7 for Se and 7–110 for Zn.     

The Karoo Basin of South Africa: type basin for the coal-bearing deposits of southern Africa

The coal-bearing sediments and coal seams of the Karoo Basin, Southern Africa are described and discussed. The Karoo Basin is bounded on its southern margin by the Cape Fold Belt, onlaps onto the Kaapvaal Craton in the north and is classified as a foreland basin. Coal seams are present within the Early Permian Vryheid Formation and the Triassic Molteno Formation.The peats of the Vryheid Formation accumulated within swamps in a cool temperate climatic regime. Lower and upper delta plain, back-barrier and fluvial environments were associated with peat formation. Thick, laterally extensive coal seams have preferentially accumulated in fluvial environments. The coals are in general inertinite-rich and high in ash. However, increasing vitrinite and decreasing ash contents within seams occur from west to east across the coalfields. The Triassic Molteno coal seams accumulated with aerially restricted swamps in fluvial environments. These Molteno coals are thin, laterally impersistent, vitrinite-rich and shaly, and formed under a warm temperate climatic regime.Palaeoclimate, depositional systems, differential subsidence and basin tectonics influence to varying degrees, the maceral content, thickness and lateral extent of coal seams. However, the geographic position of peat-forming swamps within a foreland basin, coupled with basin tectonics and differential subsidence are envisaged as the primary controls on coal parameters. The Permian coals are situated in proximal positions on the passive margin of the foreland basin. Here, subsidence was limited which enhanced oxidation of organic matter and hence the formation of inertinitic coals. The coals in this tectonic setting are thick and laterally extensive. The Triassci coals are situated within the tectonically active foreland basin margin. Rapid subsidence and sedimentation rates occurred during peat formation which resulted in the preservation of thin, laterally impersistent, high ash, vitrinite-rich, shaly coals.     

A study of the kinetic parameters of individual macerals from Upper Permian coals in South China via open-system pyrolysis

A unique Upper Permian coal, Leping coal, is widely distributed in South China. The coal samples studied in the paper were collected from two mines in the Shuicheng coalfield of Guizhou Province, southwest China. The geochemical works including coal petrography, maceral content, Rock–Eval pyrolysis, and kinetic modelling of hydrocarbon-generating have been carried out on whole coal and individual macerals. The higher contents of volatile matter, elemental hydrogen, and tar yield, and the high hydrocarbon generation potential of the Leping coals are attributed to their high content of “barkinite”, a special liptinite maceral.The hydrocarbon generation potential of “barkinite” (S₂=287 mg/g, hydrogen index (HI)=491 mg/g TOC) is greater than that of vitrinite (S₂=180 mg/g, HI=249 mg/g TOC), and much higher than that of fusinite (S₂=24 mg/g, HI=35 mg/g TOC). At the same experimental conditions, “barkinite” has a higher threshold and a narrower “oil window” than those of vitrinite and fusinite, and consequently, can generate more hydrocarbons in higher coalification temperature and shorter geological duration. Data from the activation energy distributions indicate that “barkinite” has a more homogenous chemical structure than that of vitrinite and fusinite. The above-mentioned characteristics are extremely important for exploring hydrocarbon derived from the Leping coals in South China.     

Petrographic prediction of coking properties for the Curragh coals of Australia

Curragh Queensland Mining Limited, Australia, produces a high quality medium volatile bituminous coking coal from the Orion, Pollux and Castor seams from the upper Permian Rangal Coal Measures. It is one of the lowest ash, prime hard coking coal blends produced in Australia. It is also low in sulfur and produces very strong coke when carbonized alone and in blends. Early attempts to predict coking properties of the coals from petrographic data produced predicted coke stabilities that were significantly lower than those determined from coke tests. There is some question as to how much of the ‘inertinite’ in these and other southern hemisphere coals is truly inert during carbonization and how much is reactive. The current study characterized the Curragh coals in terms of physical, chemical and petrographic characteristics and also involved the production of test oven cokes for characterization and strength testing. As part of the work effort a series of suggested techniques for improving predictions of coke strength from petrographic data were examined and a new and improved technique was developed for the Curragh coals. How broadly the technique can be applied to other coals needs to be determined.     

Organic geochemical characteristics and depositional environments of the Jurassic coals in the eastern Taurus of Southern Turkey

In this study, organic matter content, type and maturity as well as some petrographic and physical characteristics of the Jurassic coals exposed in the eastern Taurus were investigated and their depositional environments were interpreted.The total organic carbon (TOC) contents of coals in the Feke–Akkaya, Kozan–Gedikli and Kozan–Kizilinc areas are 24.54, 66.78 and 49.15%, respectively. The Feke–Akkaya and Kozan–Kizilinc coals have low Hydrogen Index (HI) values while the Kozan–Gedikli coals show moderate HI values. All coal samples display very low Oxygen Index (OI) values. The Kozan–Gedikli coals contain Type II organic matter (OM), the Feke–Akkaya coals contain a mixture of type II and type III OM; and the Kozan–Kizilinc coals are composed of Type III OM. Sterane distribution was calculated as C₂₇ > C₂₉ > C₂₈ from the m/z 217 mass chromatogram for all coal samples.T_max values for the Feke–Akkaya, Kozan–Gedikli and Kozan–Kizilinc coals are 439, 412 and 427 °C. Vitrinite reflectance values (%R_o) for the Feke–Akkaya and Kozan–Kizilinc coal samples were measured as 0.65 and 0.51 and these values reveal that the Feke–Akkaya and Kozan–Kizilinc coals are at subbituminous A or high volatile C bituminous coal stage. On the basis of biomarker maturity parameters, these coals have a low maturity.The pristane/phytane (Pr/Ph) ratios for the Feke–Akkaya, Kozan–Gedikli and Kozan–Kizilinc coals are 1.53, 1.13 and 1.25, respectively. In addition, all coals show a homohopane distribution which is dominated by low carbon numbers, and C₃₅ homohopane index is very low for all coal samples. All these features may indicate that these coals were deposited in a suboxic environment.The high sterane/hopane ratios with high concentrations of steranes, low Pr/Ph ratios and C₂₅/C₂₆ tricyclic ratios > 1 may indicate that these coals formed in a swamp environment were temporarily influenced by marine conditions.     

华南湘桂粤地区煤中热液脉体的岩石学研究

煤中高含脉率脉体的出现，是煤热液变质作用的重要依据之一。本文详细讨论了湘桂粤地区早奥陶世、早石炭世、晚二叠世和晚三叠世煤中热液脉体的种类、岩石学特征及其与煤变质程度的关系。无论什么时代的无烟煤，随着其变质程度升高，煤中脉体的种类增多，矿物成分变得复杂，较高温热水矿物出现。     

Properties of thermally metamorphosed coal from Tanjung Enim Area, South Sumatra Basin, Indonesia with special reference to the coalification path of macerals

Thermally metamorphosed Tertiary age coals from Tanjung Enim in South Sumatra Basin have been investigated by means of petrographic, mineralogical and chemical analyses. These coals were influenced by heat from an andesitic igneous intrusion. The original coal outside the metamorphosed zone is characterized by high moisture content (4.13–11.25 wt.%) and volatile matter content (> 40 wt.%, daf), as well as less than 80 wt.% (daf) carbon and low vitrinite reflectance (VR_max = 0.52–0.76%). Those coals are of subbituminous and high volatile bituminous rank. In contrast the thermally metamorphosed coals are of medium-volatile bituminous to meta-anthracite rank and characterized by low moisture content (only < 3 wt.%) and volatile matter content (< 24 wt.%, daf), as well as high carbon content (> 80 wt.%, daf) and vitrinite reflectance (VR_max = 1.87–6.20%). All the studied coals have a low mineral matter content, except for those which are highly metamorphosed, due to the formation of new minerals.The coalification path of each maceral shows that vitrinite, liptinite and inertinite reflectance converge in a transition zone at VR_max of around 1.5%. Significant decrease of volatile matter occurs in the zone between 0.5% and 2.0% VR_max. A sharp bend occurs at VR_max between 2.0% and 2.5%. Above 2.5%, the volatile matter decreases only very slightly. Between VR_r = 0.5% and 2.0%, the carbon content of the coals is ascending drastically. Above 2.5% VR_r, the carbon content becomes relatively stable (around 95 wt.%, daf).Vitrinite is the most abundant maceral in low rank coal (69.6–86.2 vol.%). Liptinite and inertinite are minor constituents. In the high rank coal, the thermally altered vitrinite composes 82.4–93.8 vol.%. Mosaic structures can be recognized as groundmasss and crack fillings. The most common minerals found are carbonates, pyrite or marcasite and clay minerals. The latter consist of kaolinite in low rank coal and illite and rectorite in high rank coal. Change of functional groups with rank increase is reflected most of all by the increase of the ratio of aromatic C–H to aliphatic C–H absorbances based on FTIR analysis. The Oxygen Index values of all studied coals are low (OI < 5 mg CO₂/g TOC) and the high rank coals have a lower Hydrogen Index (< 130 mg HC/g TOC) than the low rank coals (about 300 mg HC/g TOC). T_max increases with maturity (420–440 °C for low rank coals and 475–551 °C for high rank coals).Based on the above data, it was calculated that the temperature of contact metamorphism reached 700–750 °C in the most metamorphosed coal.     

Microfacies and depositional environment of Tertiary Tanjung Enim low rank coal, South Sumatra Basin, Indonesia

The South Sumatra basin is among the most important coal producing basins in Indonesia. Results of an organic petrography study on coals from Tanjung Enim, South Sumatra Basin are reported. The studied low rank coals have a mean random huminite reflectance between 0.35% and 0.46% and are dominated by huminite (34.6–94.6 vol.%). Less abundant are liptinite (4.0–61.4 vol.%) and inertinite (0.2–43.9 vol.%). Minerals are found only in small amounts (0–2 vol.%); mostly as iron sulfide.Based on maceral assemblages, the coals can be grouped into five classes: (1) humotelinite-rich group, (2) humodetrinite-rich group, (3) humocollinite-rich group, (4) inertinite-rich group and (5) humodetrinite–liptinite-rich group. Comparing the distribution of maceral assemblages to the maceral or pre-maceral assemblages in modern tropical domed peat in Indonesia reveals many similarities. The basal section of the studied coal seams is represented typically by the humodetrinite–liptinite-rich group. This section might be derived from sapric or fine hemic peat often occurring at the base of modern peats. The middle section of the seams is characterized by humotelinite-rich and humocollinite-rich groups. The precursors of these groups were hemic and fine hemic peats. The top section of the coal seams is typically represented by the humodetrinite-rich or inertinite-rich group. These groups are the counterparts of fibric peat at the top of the modern peats. The sequence of maceral assemblages thus represents the change of topogenous to ombrogenous peat and the development of a raised peat bog.A comparison between the result of detailed maceral assemblage analysis and the paleodepositional environment as established from coal maceral ratio calculation indicates that the use of coal maceral ratio diagrams developed for other coal deposits fails to deduce paleo-peat development for these young tropical coals. In particular, mineral distribution and composition should not be neglected in coal facies interpretations.     

Coal petrographical characterization of the Mecsek bituminous coal basin, with special reference to the contact metamorphism of coal seams

The bituminous coals of the Mecsek Mountains were formed during the Early Lias and are of paralic origin. The limnic complex of the layers consists of sandstone, aleurite and coal, and the upper layer contains marl of marine origin. The 9–15 minable coal seams have a thickness of 1.2–14.0 m. The Mecsek Coal Field and the coal complex within it show a folded and fractured structure, and with regard to their mechanical behaviour, are strongly stressed.75–90% of the coal material is vitrinite, and 1–14% is inertinite. The quantity of liptinite is smaller than 9%. The coal rank is that of gas coal and fat coal with a reflectivity of 0.85–1.5%, respectively. The coal rank differences and variations according to zones are the consequence of forces of various magnitude that occurred in the course of orogenic movements.During the Early Cretaceous, there was some under-sea-bed volcanic activity in this field, the diabasic material of which appeared in the form of a bed vein along the coal seams, and this has exerted a strong metamorphic influence on the coal. It has resulted in thermo-contact alteration, i.e. in the appearance of natural coke and semicoke of various degrees of metamorphism. This alteration badly affected the quality and technological characteristics, especially the cokability of the coal.     

Coals of Canada: Distribution and compositional characteristics

Canada's coal resources occur in 16 sedimentary basins or groups of basins and range in age from Devonian to Tertiary. The Western Canada Sedimentary Basin (WCSB), which contains the vast majority (about 90%) of the nation's coal resources of immediate interest, underlies a large area in the provinces of British Columbia, Alberta, Saskatchewan and Manitoba, extending northward to about the 62nd Parallel in Yukon and Northwest Territories. Coal deposits in the WCSB range in age from Early Carboniferous (Mississippian) to Paleocene. Rank ranges from lignite to semianthracite. About 36% of the total estimated 71,000 megatonnes of resources of immediate interest in the WCSB is bituminous coal, including a high proportion in the medium to low volatile range. Their low sulphur contents and acceptable ash levels make these medium and low volatile bituminous coals attractive 3s coking feedstocks and large quantities are mined for that purpose. The lower rank western Canadian coals are used mainly for electricity generation.Significant resources of bituminous coal occur in the coalfields of Atlantic Canada where they have been mined since 1720. Most of these coals are classed as high volatile A bituminous and most are used for power generation. Large resources of coal (lignite to anthracite) also occur in more remote regions of Canada, such as the Bowser Basin in northwestern British Columbia, and Sverdrup Basin/ Franklinian Geosyncline in the Arctic Islands. Information on distribution and compositional attributes of these frontier region coals is commonly scarce.     

Coal as a source rock for oil: a review

The geological debate about whether, and to what extent, humic coals have sourced oil is likely to continue for some time, despite some important advances in our knowledge of the processes involved. It is clear that not only liptinites, but also perhydrous vitrinites have the potential to generate hydrocarbon liquids in the course of natural coalification. Some liptinites, especially alginite, cutinite, and suberinite, contain a higher proportion of aliphatic moieties in their structure than other liptinites such as sporinite and resinite and are, therefore, more oil-prone. It is of potential value to be able to predict the several environments of deposition in which coals with high liptinite contents or containing perhydrous vitrinites may have been formed. Review of the distribution of oil-prone coals in time and space reveals that most are Jurassic–Tertiary with key examples from Australia, New Zealand, and Indonesia. Methods based both on experimental simulations and the examination of naturally matured samples have been used to determine the order of generation of hydrocarbons from different macerals. Results are not entirely consistent among the different approaches, and there is much overlap in the ranges of degradation, but it seems probable that in the natural environment vitrinites begin to generate early, followed by labile liptinites such as suberinite, then cutinite, sporinite, and, finally, alginite.Petroleum potential may be determined by experimental simulation of natural coalification or inferred through various micro-techniques, especially fluorescence and infrared (IR) spectroscopy, or bulk techniques such as elemental analysis and ¹³C NMR spectroscopy. The latter three techniques enable a measure of the polymethylene component of the coal, which now appears to be one of the best available approaches for determining petroleum potential. No method of experimental simulation of petroleum generation from coals is without criticism, and comparative results are highly variable. However, hydrous pyrolysis, confined pyrolysis, and forms of open-system hydrous pyrolysis approach acceptable simulations.Whether, and to what degree generated liquid hydrocarbons are expelled, has long been the central problem in ‘oil from coal’ studies. The structure of vitrinite was believed until recently to contain an interconnected microporous network in which generated oil would be contained until an expulsion threshold was attained. Recent studies show the pores are not interconnected. Combined with a dynamic model of pore generation, it now seems that expulsion of hydrocarbons is best explained by activated diffusion of molecules to maceral boundaries and ultimately by cleats and fractures to coal seam boundaries. The main reason for poor expulsion is the adsorption of oil on the organic macromolecule, which may be overcome (1) if coals are thin and interbedded with clastic sediments, or (2) if the coals are very hydrogen-rich and generate large quantities of oil.The existence of oil in vitrinite is attested to by solvent extractions, fluorescence properties, and by microscopic observations of oil and bitumen. Experimental simulation of expulsion of oil from coals has only recently been attempted. The relative timing of release of generated CO₂ and CH₄ could have considerable importance in promoting the expulsion of liquid hydrocarbons but the mechanism is unclear. As it is universally agreed that dispersed organic matter (DOM) in some shales readily generates and expels petroleum, it is curious that few consistent geochemical differences have been found between coal macerals and DOM in interbedded shales.Unambiguous evidence of expulsion from coals is limited, and in particular only a few commercial oil discoveries can be confidently correlated to coals. These include Upper Cretaceous Fruitland Formation coals in the USA, from which oil is produced; New Zealand Tertiary coals; and Middle Jurassic coals from the Danish North Sea. It is likely that coals have at least contributed to significant oil discoveries in the Gippsland Basin, Australia; in the Turpan Basin, China; and in the Kutei and Ardjuna basins in Indonesia, but this remains unproven. Early reports that early Jurassic coals in mid-Norway were a major source of the reservoired oils have been shown to be inaccurate.None of the proposed ‘rules of thumb’ for generation or expulsion of petroleum from coals seem particularly robust. Decisions on whether a particular coal is likely to have been an active source for oil should consider all available geological and geochemical information. The assumptions made in computational models should be well understood as it is likely with new understandings of processes involved that some of these assumptions will be difficult to sustain.     

Petrographic characteristics and depositional conditions of Eocene coals of platform basins, Meghalaya, India

The coal deposits of Meghalaya occur in the Lakadong Sandstone (25–250 m thick) of Eocene age. The coal-bearing formations are understood to have been deposited over platform areas in estuarine and lagoonal environments and subjected to recurrent marine transgressions and regressions during the Eocene period. There are three major groups of coalfields in Meghalaya, viz. Garo Hills (West Daranggiri and Siju Coalfields), Khasi Hills (Langrin and Mawlong–Shella Coalfields) and minor coalfields (Laitryngew, Cherrapunji and Bapung Coalfields). Pillar coal samples have been collected from 10 seams at 15 locations and have been subjected to a detailed petrographic examination for their characterization. An effort has been made to trace the path of their evolution based on coal petrography-based models. The quantitative petrographic analysis shows that these coals are vitrinite rich (45.0–92.9%, mean 73.4% mmf basis) with low concentration of inertinite (0.0–13.8%, mean 3.0% mmf basis), whereas the liptinite occurs in appreciable concentration (5.5–53.1%, mean 22.5% mmf basis). Further, these coals are rich in vitrite (51.6–100%, mean 78.3% mmf basis). The volatile matter (from 38.5% to 70.0%, d.a.f.) and vitrinite reflectance (Rom from 0.37% to 0.68%) characterize these coals, as per German (DIN) and North American classification, approximately as sub-bituminous ‘C' to high volatile ‘C' bituminous. The occurrence of teleutospore (single, double and triple celled) suggests that these coals have originated from a characteristic Tertiary flora. The maceral and microlithotype composition in the coal petrography-based depositional models suggest that the coals of Garo Hills were formed in reed to open water swamps in telmatic to limnic conditions. The coals of Khasi Hills were dominated by forest swamps and telmatic to limno-telmatic conditions. In addition, the occurrence of large-size resins suggests prolific growth of conifers in the swamps.