Strontium and neodymium isotopic study of Libyan Desert Glass: Inherited Pan‐African age signatures and new evidence for target material

Abstract— Libyan Desert Glass (LDG) is an impact‐related, natural glass of still unknown target material. We have determined Rb‐Sr and Sm‐Nd isotopic ratios from seven LDG samples and five associated sandstones from the LDG strewn field in the Great Sand Sea, western Egypt. Planar deformation features were recently detected in quartz from these sandstones. ⁸⁷Sr/⁸⁶Sr ratios and ?‐Nd values for LDG range between 0.71219 and 0.71344, and between –16.6 and –17.8, respectively, and hence are distinct from the less radiogenic ⁸⁷Sr/⁸⁶Sr ratios of 0.70910–0.71053 and ?‐Nd values from –6.9 to –9.6 for the local sandstones from the LDG strewn field. Previously published isotopic ratios from the Libyan BP and Oasis crater sandstones are generally incompatible with our LDG values. LDG formation undoubtedly occurred at 29 Ma, but neither the Rb‐Sr nor the Sm‐Nd isotopic system were rehomogenised during the impact event, as we can deduce from Pan‐African ages of ?540 Ma determined from the regression lines from a total of 14 LDG samples from this work and the literature. Together with similar Sr and Nd isotopic values for LDG and granitoid rocks from northeast Africa west of the Nile, these findings point to a sandy matrix target material for the LDG derived from a Precambrian crystalline basement, ruling out the Cretaceous sandstones of the former “Nubian Group” as possible precursors for LDG.     

Major and trace element compositions of georgiaites: Clues to the source of North American tektites

Abstract— Electron microprobe and laser ablation, inductively‐coupled plasma mass spectrometer analyses of 24 georgiaites show that these tektites are all Si‐rich (79–83 wt% SiO₂) glasses with variable major and trace element abundances (e.g., FeO varies from 2.1 to 3.7 wt%). Glass compositions are similar to but not identical with average upper continental crust. For example, georgiaites are light rare earth element enriched with small negative Eu anomalies (Eu/Eu*=0.73‐0.86) and La‐Th‐Sc systematics are intermediate between that of Archean and post‐Archean continental crust. When the georgiaite data are placed in the context of data for all North American tektites, triangular arrays appear on some oxide‐oxide plots (e.g., FeO‐MgO). Large variations in refractory element abundances and ratios compared to the variation in SiO₂ favors mixing over volatilization as a cause of the compositional variation. If all the tektites formed as a result of a single impact, then triangular arrays in oxide‐oxide variation diagrams require at least three source components. These components include a Si‐rich material, probably a quartz‐rich sand that was predominant in the formation of georgiaites. Two relatively silica‐poor and Fe‐rich components have compositional characteristics similar to shales and greywackes. The La‐Th‐Sc systematics of the georgiaites and most other North American tektites are distinctive and could potentially be used to link the tektites to Eocene sediments at the Chesapeake Bay impact structure.     

Libyan Desert Glass area in western Egypt: Shocked quartz in bedrock points to a possible deeply eroded impact structure in the region

Libyan Desert Glass (LDG) is an enigmatic natural glass, about 28.5 million years old, which occurs on the floor of corridors between sand dunes of the southwestern corner of the Great Sand Sea in western Egypt, near the Libyan border. The glass occurs as centimeter‐ to decimeter‐sized, irregularly shaped, and strongly wind‐eroded pieces. The origin of the LDG has been the subject of much debate since its discovery, and a variety of exotic processes were suggested, including a hydrothermal sol‐gel process or a lunar volcanic source. However, evidence of an impact origin of these glasses included the presence of schlieren and partly or completely digested minerals, such as lechatelierite, baddeleyite (a high‐T breakdown product of zircon), and the presence of a meteoritic component in some of the glass samples. The source material of the glass remains an open question. Geochemical data indicate that neither the local sands nor sandstones from various sources in the region are good candidates to be the sole precursors of the LDG. No detailed studies of all local rocks exist, though. There are some chemical and isotopic similarity to rocks from the BP and Oasis impact structures in Libya, but no further evidence for a link between these structures and LDG was found so far. These complications and the lack of a crater structure in the area of the LDG strewn field have rendered an origin by airburst‐induced melting of surface rocks as a much‐discussed alternative. About 20 years ago, a few shocked quartz‐bearing breccias (float samples) were found in the LDG strewn field. To study this question further, several basement rock outcrops in the LDG area were sampled during three expeditions in the area. Here we report on the discovery of shock‐produced planar microdeformation features, namely planar fractures (PFs), planar deformation features (PDFs), and feather features (FFs), in quartz grains from bedrock samples. Our observations show that the investigated samples were shocked to moderate pressure, of at least 16 GPa. We interpret these observations to indicate that there was a physical impact event, not just an airburst, and that the crater has been almost completely eroded since its formation.     

δ18O and chemical composition of Libyan Desert Glass,country rocks,and sands: New considerations on target material

Oxygen isotope and chemical measurements were carried out on 25 samples of Libyan Desert Glass (LDG), 21 samples of sandstone, and 3 of sand from the same area. The δ¹⁸O of LDG samples range from 9.0‰ to 11.9‰ (Vienna Standard Mean Ocean Water [VSMOW]); some correlations between isotope data and typological features of the LDG samples are pointed out. The initial δ¹⁸O of a bulk parent material may be slightly increased by fusion due to the loss of isotopically light pore water with no isotope exchange with oxygen containing minerals. Accordingly, the δ¹⁸O of the bulk parent material of LDG may have been about 9.0 ± 1‰ (VSMOW). The measured bulk sandstone and sand samples have δ¹⁸O values ranging from 12.6‰ to 19.5‰ and are consequently ruled out as parent materials, matching the results of previous studies. However, separated quartz fractions have δ¹⁸O values compatible with the LDG values suggesting that the modern surface sand inherited quartz from the target material. This hypothesis fits previous findings of lechatelierite and baddeleyite in these materials. As the age of the parent material reported in previous studies is Pan‐African, we measured the δ¹⁸O values of bulk rock and quartz from intrusives of Pan‐African age and the results obtained were compatible with the LDG values. The main element abundances (Fe, Mg, Ca, K, Na) in our LDG samples conform to previous estimates; Fe, Mg, and K tend to be higher in heterogeneous samples with dark layers. The hypothesis of a low‐altitude airburst involving silica‐rich surface materials deriving from weathered intrusives of Pan‐African age, partially melted and blown over a huge surface by supersonic winds matches the results obtained.     

Impact glasses in fallout suevites from the Ries impact structure,Germany: An analytical SEM study

Abstract— t‐Impact‐generated glasses from fallout suevite deposits at the Ries impact structure have been investigated using analytical scanning electron microscopy. Approximately 320 analyses of glass clasts were obtained. Four glass types are distinguished on the basis of composition and microtextures. Type 1 glasses correspond to the aerodynamically shaped glass bombs studied previously by many workers. Major oxide concentrations indicate the involvement of granitic rocks, amphibolites, and minor Al‐rich gneisses during melting. Type 2 glasses are chemically heterogeneous, even within individual clasts, with variations of several wt% in most of the major oxides (e.g., 57–70 wt% SiO₂). This suggests incomplete mixing of: 1) mineral‐derived melts or 2) whole rock melts from a wide range of lithologies. Aluminium‐rich clinopyroxene and Fe‐Mg‐rich plagioclase quench crystals are present in type 1 and 2 glasses, respectively. Type 3 glasses contain substantial amounts of H₂O (?12–17 wt%), low SiO₂ (50–53 wt%), high Al₂O₃ (17–21 wt%), and high CaO (5–7 wt%) contents. This suggests an origin due to shock melting of part of the sedimentary cover. Type 4 glasses form a ubiquitous component of the suevites. Based on their high SiO₂ content (?85–100 wt%), the only possible protolith are sandstones in the lowermost part of the sedimentary succession. Calcite forms globules within type 1 glasses, with which it develops microtextures indicative of liquid immiscibility. Unequivocal evidence also exists for liquid immiscibility between what are now montmorillonite globules and type 1, 2, and 4 glasses, indicating that montmorillonite was originally an impact melt glass. Clearly, the melt zone at the Ries must have incorporated a substantial fraction of the sedimentary cover, as well as the underlying crystalline basement rocks. Impact melts were derived from different target lithologies and these separate disaggregated melts did not substantially mix in most cases (type 2, 3, and 4 glasses and carbonate melts).     

Impact metamorphism of CaCO3‐bearing sandstones at the Haughton structure,Canada

Abstract— Impact‐metamorphosed CaCO₃‐bearing sandstones at the Haughton structure have been divided into 6 classes, based to a large extent on a previous classification developed for sandstones at Meteor Crater. Class 1a sandstones (<3 GPa) display crude shatter cones, but no other petrographic indications of shock. At pressures of 3 to 5.5 GPa (class 1b), porosity is destroyed and well‐developed shatter cones occur. Class 2 rocks display planar deformation features (PDFs) and are characterized by a “jigsaw” texture produced by rotation and shear at quartz grain boundaries. Calcite shows an increase in the density of mechanical twins and undergoes micro‐brecciation in class 1 and 2 sandstones. Class 3 samples display multiple sets of PDFs and widespread development of diaplectic glass, toasted quartz, and symplectic intergrowths of quartz, diaplectic glass, and coesite. Textural evidence, such as the intermingling of silicate glasses and calcite and the presence of flow textures, indicates that calcite in class 3 sandstones has undergone melting. This constrains the onset of melting of calcite in the Haughton sandstones to > 10 < 20 GPa. At higher pressures, the original texture of the sandstone is lost, which is associated with major development of vesicular SiO₂ glass or lechatelierite. Class 5 rocks (>30 GPa) consist almost entirely of lechatelierite. A new class of shocked sandstones (class 6) consists of SiO₂‐rich melt that recrystallized to microcrystalline quartz. Calcite within class 4 to 6 sandstones also underwent melting and is preserved as globules and euhedral crystals within SiO₂ phases, demonstrating the importance of impact melting, and not decomposition, in these CaCO₃‐bearing sandstones.     

Evidence for K‐rich terranes on Vesta from impact spherules

Abstract— The howardite‐eucrite‐diogenite (HED) clan is a group of meteorites that probably originate from the asteroid Vesta. Some of them are complex breccias that contain impact glasses whose compositions mirror that of their source regions. Some K‐rich impact glasses (up to 2 wt% K₂O) suggest that in addition to basalts and ultramafic cumulates, K‐rich rocks are exposed on Vesta's surface. One K‐rich glass (up to 6 wt% K₂O), with a felsic composition, provides the first evidence of highly differentiated K‐rich rocks on a large asteroid. They can be compared to the rare lunar granites and suggest that magmas generated in a large asteroid are more diverse than previously thought.     

Water in tektites and impact glasses by fourier-transformed infrared spectrometry

Abstract— To improve the scarce data base of H₂O content in tektites and impact glasses, we analyzed 26 tektites from all four strewn fields and 25 impact glass samples for their H₂O content. We used the fourier-transformed infrared (FTIR) spectrometry method, which permits measurement of areas of ～40 μm in diameter. Our results show that the tektites have H₂O contents ranging from 0.002 to 0.030 wt% (average 0.014 ± 0.008 wt%). Ivory Coast tektites have the lowest H₂O abundances (0.002–0.003 wt%), and Muong Nong-type indochinites and some North American tektites having the highest contents (up to ～0.03 wt%). Impact glass samples (from the Zhamanshin, Aouelloul, and Rio Cuarto craters) yielded H₂O contents of 0.008 to 0.13 wt% H₂O. Typical impact glasses from the Aouelloul and Zhamanshin craters have low H₂O contents (0.008 to 0.063 wt%). Libyan Desert Glasses and Rio Cuarto glasses have higher H₂O contents (～0.11 wt%). We also analyzed glasses of unknown origin (e.g., urengoites; glass fragments from Tikal), which showed very low H₂O contents, in agreement with an origin by impact. Our data confirm that all tektites found on land have very low H₂O contents (<0.03 wt% H₂O), while impact glasses have slightly higher H₂O contents. Both glass types are very dry compared to volcanic glasses. This study confirms that the low H₂O contents (<0.05 wt%) of such glasses can be considered good evidence for an origin by impact.     

Shocked rocks and impact glasses from the El'gygytgyn impact structure,Russia

Abstract— The El'gygytgyn impact structure is about 18 km in diameter and is located in the central part of Chukotka, arctic Russia. The crater was formed in volcanic rock strata of Cretaceous age, which include lava and tuffs of rhyolites, dacites, and andesites. A mid‐Pliocene age of the crater was previously determined by fission track (3.45 ± 0.15 Ma) and ⁴⁰Ar/³⁹Ar dating (3.58 ± 0.04 Ma). The ejecta layer around the crater is completely eroded. Shock‐metamorphosed volcanic rocks, impact melt rocks, and bomb‐shaped impact glasses occur in lacustrine terraces but have been redeposited after the impact event. Clasts of volcanic rocks, which range in composition from rhyolite to dacite, represent all stages of shock metamorphism, including selective melting and formation of homogeneous impact melt. Four stages of shocked volcanic rocks were identified: stage I (≤35 GPa; lava and tuff contain weakly to strongly shocked quartz and feldspar clasts with abundant PFs and PDFs; coesite and stishovite occur as well), stage II (35–45 GPa; quartz and feldspar are converted to diaplectic glass; coesite but no stishovite), stage III (45–55 GPa; partly melted volcanic rocks; common diaplectic quartz glass; feldspar is melted), and stage IV (>55 GPa; melt rocks and glasses). Two main types of impact melt rocks occur in the crater: 1) impact melt rocks and impact melt breccias (containing abundant fragments of shocked volcanic rocks) that were probably derived from (now eroded) impact melt flows on the crater walls, and 2) aerodynamically shaped impact melt glass “bombs” composed of homogeneous glass. The composition of the glasses is almost identical to that of rhyolites from the uppermost part of the target. Cobalt, Ni, and Ir abundances in the impact glasses and melt rocks are not or only slightly enriched compared to the volcanic target rocks; only the Cr abundances show a distinct enrichment, which points toward an achondritic projectile. However, the present data do not allow one to unambiguously identify a meteoritic component in the El'gygytgyn impact melt rocks.     

Fluid inclusion evidence for impact‐related hydrothermal fluid and hydrocarbon migration in Creataceous sediments of the ICDP‐Chicxulub drill core Yax‐1

Fluid inclusions studies in quartz and calcite in samples from the ICDP‐Chicxulub drill core Yaxcopoil‐1 (Yax‐1) have revealed compelling evidence for impact‐induced hydrothermal alteration. Fluid circulation through the melt breccia and the underlying sedimentary rocks was not homogeneous in time and space. The formation of euhedral quartz crystals in vugs hosted by Cretaceous limestones is related to the migration of hot (>200 °C), highly saline, metal‐rich, hydrocarbon‐bearing brines. Hydrocarbons present in some inclusions in quartz are assumed to derive from cracking of pre‐impact organic matter. The center of the crater is assumed to be the source of the hot quartz‐forming brines. Fluid inclusions in abundant newly‐formed calcite indicate lower cyrstallization temperatures (75–100 °C). Calcite crystallization is likely related to a later stage of hydrothermal alteration. Calcite precipitated from saline fluids, most probably from formation water. Carbon and oxygen isotope compositions and REE distributions in calcites and carbonate host rocks suggest that the calcite‐forming fluids have achieved close equilibrium conditions with the Cretaceous limestones. The precipitation of calcite may be related to the convection of local pore fluids, possibly triggered by impact‐induced conductive heating of the sediments.     

Geology and impact features of Vargeão Dome,southern Brazil

Abstract– Vargeão Dome (southern Brazil) is a circular feature formed in lava flows of the Lower Cretaceous Serra Geral Formation and in sandstones of the Paraná Basin. Even though its impact origin was already proposed in the 1980s, little information about its geological and impact features is available in the literature. The structure has a rim‐rim diameter of approximately 12 km and comprises several ring‐like concentric features with multiple concentric lineaments. The presence of a central uplift is suggested by the occurrence of deformed sandstone strata of the Botucatu and Pirambóia formations. We present the morphological/structural characteristics of Vargeão Dome, characterize the different rock types that occur in its interior, mainly brecciated volcanic rocks (BVR) of the Serra Geral Formation, and discuss the deformation and shock features in the volcanic rocks and in sandstones. These features comprise shatter cones in sandstone and basalt, as well as planar microstructures in quartz. A geochemical comparison of the target rock equivalents from outside the structure with the shocked rocks from its interior shows that both the BVRs and the brecciated sandstone have a composition largely similar to that of the corresponding unshocked lithologies. No traces of meteoritic material have been found so far. The results confirm the impact origin of Vargeão Dome, making it one of the largest among the rare impact craters in basaltic targets known on Earth.     

Shock‐metamorphic microfeatures in chert from the Jebel Waqf as Suwwan impact structure,Jordan

Abstract– The petrographic investigation of a shocked, chalcedony‐, quartzine‐, and quartz‐bearing allochthonous chert nodule (probably Upper Cretaceous) recovered from surficial wadi gravels in the inner parts of the central uplift of the approximately 6 km in diameter Jebel Waqf as Suwwan impact structure, Jordan, reveals new potential shock indicators in microfibrous–spherulitic silica, in addition to well‐established shock‐metamorphic effects in coarser crystalline quartz. The microcrystalline chert groundmass exhibits a macroscopic dendritic and suborthogonal fracture pattern commonly associated with thin “recrystallization bands” that intersect the pre‐existing diagenetic chert fabric. Fibrous aggregates of quartzine spherulites in chalcedony‐quartzine‐quartz veinlets locally have a shattered appearance and show conspicuous “curved fractures” perpendicular to the quartzine fiber direction (and parallel to [0001]) that commonly trend subparallel to planar fractures (PFs) in neighboring shocked quartz. Quartz exhibits PFs, feather features (FFs), and mainly single sets of planar deformation features (PDFs) parallel to the basal plane (0001) (Brazil twins) and, rarely, additional PDFs parallel to {101¯3}. Shock petrography indicates shock pressures of ≥10 GPa and high shock‐induced differential stresses that affected the chert nodule. The internal crosscutting relationships of primary diagenetic and impact‐related deformational features together with shockpressure estimates suggest that the curved fractures across quartzine spherulites might represent specific (low‐ to medium‐pressure) shock‐metamorphic features, possibly in structural analogy to basal plane PFs in quartz. The dendritic–suborthogonal fractures in the microcrystalline chert groundmass and recrystallization bands are likely related to impact‐induced shear deformation and recrystallization, respectively, and cannot be considered as definite shock indicators.     

QUARTZ AND FELDSPAR GLASSES PRODUCED BY NATURAL AND EXPERIMENTAL SHOCK

Refractive index, density and infrared absorption studies of naturally and experimentally shocked-produced glasses formed from quartz, plagioclase, and alkali-feldspar confirm the existence of two main groups of amorphous forms of the framework silicates: solid-state and liquid-state glasses. These were apparently formed as metastable release products of high-pressure-phases above and below the glass transition temperatures. Solid-state glasses exhibit a series of structural states with increasing disorder caused by increasing shock pressures and temperatures. They gradually merge into the structural state of fused minerals similar to that of synthetic glasses quenched from a melt. Shock-fused alkali feldspars can, however, be distinguished from their laboratory-fused counterparts by infrared absorption and by higher density. It is concluded from recovery shock experiments on single crystals that solid-state glasses are formed by shock pressures between about 300 and 450 kb (feldspars) and 350 and 500 kb (quartz), whereas pressures exceeding some 430 kb (feldspars) and 500 kb (quartz) are necessary to produce liquid-state glasses     

Steinheim suevite—A first report of melt‐bearing impactites from the Steinheim Basin (SW Germany)

Abstract– The 3.8 km Steinheim Basin in SW Germany is a complex impact crater with central uplift hosted by a sequence of Triassic to Jurassic sedimentary rocks. It exhibits a well‐preserved crater morphology, intensely brecciated limestone blocks that form the crater rim, as well as distinct shatter cones in limestones. In addition, an impact breccia mainly composed of Middle to Upper Jurassic limestones, marls, mudstones, and sandstones is known from drilling into the impact crater. No impact melt lithologies, however, have so far been reported from the Steinheim Basin. In samples of the breccia that were taken from the B‐26 drill core, we discovered small particles (up to millimeters in size) that are rich in SiO₂ (～50 wt%) and Al₂O₃ (～28 wt%), and contain particles of Fe‐Ni‐Co sulfides, as well as target rock clasts (shocked and unshocked quartz, feldspar, limestone) and droplet‐shaped particles of calcite. The particles exhibit distinct flow structures and relicts of schlieren and vesicles. From the geochemical composition and the textural properties, we interpret these particles as mixed silicate melt fragments widely recrystallized, altered, and/or transformed into hydrous phyllosilicates. Furthermore, we detected schlieren of lechatelierite and recrystallized carbonate melt. On the basis of impactite nomenclature, the melt‐bearing impact breccia in the Steinheim Basin can be denominated as Steinheim suevite. The geochemical character of the mixed melt particles points to Middle Jurassic sandstones (“Eisensandstein” Formation) that crop out at the center of the central uplift as the source for the melt fragments.     

Coesite in a Muong Nong‐type tektite from Muong Phin,Laos: Description,formation, and survival

We examined 16 white opaque inclusions exposed on two polished slices of a Muong Nong‐type Australasian tektite from Muong Phin, Laos. The inclusions usually consist of a core, surrounded by a froth layer, and a quartz neoblast layer. The cores are composed primarily of a mixture of silica glass, coesite, and quartz in varying proportions. A thin (up to ~4 μm) layer of SiO₂‐poor glass enriched in FeO, MgO, CaO, Al₂O₃, and TiO₂ is observed as a bright halo in backscattered electron images around the quartz neoblasts and in places contains μm‐sized crystals, which may be Fe,Mg‐rich spinel. The distribution and textural relationships between the coesite‐bearing inclusions and the tektite matrix point to an in situ formation of the coesite due to an impact, rather than to infall, from a nearby impact, into tektite melt produced by the aerial burst of a bolide. The quartz neoblasts probably formed by crystallization of silica melt squeezed out of the inclusion core during the development of the froth layer. The bright halo may be the result of silica diffusing from the adjacent tektite melt into the growing quartz neoblasts. We propose that the survival of coesite was possible due to the froth layer that acted as a heat sink during bubble expansion and then as a thermal insulator.     

Determination of volatile concentrations in fluorapatite of Martian shergottite NWA 2975 by combining synchrotron FTIR,Raman spectroscopy,EMPA, and TEM,and inferences on the volatile budget of the apatite host‐magma

We combined the focused ion beam sample preparation technique with polarized synchrotron‐based FTIR (Fourier transform infrared) spectroscopy, laser‐Raman spectroscopy, electron microprobe analysis (EMPA), and transmission electron microscope (TEM) analysis to identify and quantify structurally bound OH, F, Cl, and CO₃ groups in fluorapatite from the Northwest Africa 2975 (NWA 2975) shergottite. In this study, the first FTIR spectra of the OH‐stretching region from a Martian apatite are presented that show characteristic OH‐bands of a F‐rich, hydroxyl‐bearing apatite. Depending on the method of apatite‐formula calculation and whether charge balance is assumed or not, the FTIR‐based quantification of the incorporated OH, expressed as wt% H₂O, is in variably good agreement with the H₂O concentration calculated from electron microprobe data. EMP analyses yielded between 0.35 and 0.54 wt% H₂O, and IR data yielded an average H₂O content of 0.31 ± 0.03 wt%, consistent with the lower range determined from EMP analyses. The TEM observations implied that the volatiles budget of fluorapatite is magmatic. The water content and the relative volatile ratios calculated for the NWA 2975 magma are similar to those established for other enriched or intermediate shergottites. It is difficult to define the source of enrichment: either Martian wet mantle or crustal assimilation. Comparing the environment of parental magma generation for NWA 2975 with the terrestrial mantle in terms of water content, it displays a composition intermediate between enriched and depleted MORB.     

Petrogenesis of Allan Hills 84001: Constraints from impact‐melted feldspathic and silica glasses

Abstract— Compositional and textural relationships of shock‐melted glasses in the Allan Hills (ALH) 84001 meteorite have been examined by optical microscopy, electron microprobe analysis, and compositional mapping. The feldspathic and silica glasses exhibit features which constrain the relative timing of shock events and carbonate deposition in ALH 84001. The feldspathic glasses are stoichiometric and have compositions plausibly described as forming from igneous plagioclase (An_27–39Ab_58–68Or_3–7) or sanidine (Or₅₁Ab₄₆An₃), or from a mixture of these phases (mixed‐feldspar glasses). These observations argue against prior interpretations of feldspathic glasses as unflowed maskelynite, hydrothermal precipitates or alteration products, or shock melts that have undergone alkali volatilization. Carbonate was deposited around previously formed mixed‐feldspar glass clasts, suggesting that carbonate deposition occurred after the shock event that formed the granular bands (crushed zones) in this meteorite. SiO₂‐rich glasses appear to be silica remobilized during shock, with little addition of other material. A petrogenetic history of ALH 84001 consistent with the observations of feldspathic and silica glasses is (1) igneous crystallization and cumulate formation; (2) a pre‐carbonate shock event that formed the granular bands (crushed zones) and sheared chromites, and melted igneous plagioclase and sanidine to form mixed‐feldspar glasses; (3) carbonate and silica deposition in the granular bands (veining of plagioclase glasses by SiO₂ and deposition of carbonate around mixed‐feldspar and plagioclase glass clasts); (4) a post‐carbonate shock event that resulted in invasion of carbonate by feldspathic melts, shock faulting and decarbonation of carbonate, high‐temperature mobilization of silica melts, and minor dissolution of orthopyroxene by silica melts.     

Magmatic cristobalite and quartz in the NWA 856 Martian meteorite

Abstract— Silica‐rich late‐stage crystallization pockets in the Martian meteorite Northwest Africa (NWA) 856 were investigated by transmission electron microscopy (TEM). The pockets occur as wedges between maskelynite laths or between maskelynite and pyroxene. They consist of elongated grains of cristobalite and quartz embedded in a silica‐rich glass. Interstitial to the amorphous phase and silica minerals, a number of small accessory minerals have been identified, typical for late‐stage crystallization products. They are ilmenite, tranquillityite, fayalite, troilite, baddeleyite, apatite, and chloroapatite. Cristobalite and quartz are shocked, as revealed by the occurrence of numerous amorphous lamellae. This assemblage suggests metastable dendritic crystallization under hydrous conditions. Cristobalite crystallization was probably facilitated by the presence of impurities such as Na or H₂O. Our observations show that silica minerals can be formed under magmatic conditions on Mars.     

Localized shock-induced melting of sandstone at low shock pressures (<17.5 GPa): An experimental study

Shock-induced recovery experiments were performed to investigate melt formation in porous sandstones in the low shock pressure regime between 2.5 and 17.5 GPa. The sandstone shocked at 2.5 and 5 GPa is characterized by pore closure, fracturing of quartz (Qtz), and compression and deformation of phyllosilicates; no melting was observed. At higher pressures, five different types of melts were generated around pores and alongside fractures in the sandstone. Melting of kaolinite (Kln), illite (Ill), and muscovite (Ms) starts at 7.5, 12, and 15 GPa, respectively. The larger the amount of water in these minerals (Kln ~14 wt%, Ill ~6–10 wt%, and Ms ~4 wt% H₂O), the higher the shock compressibility and the lower the shock pressure required to induce melting. Vesicles in the almost dry silicate glasses attest to the loss of structural water during the short shock duration of the experiment. The compositions of the phyllosilicate-based glasses are identical to the composition of the parental minerals or their mixtures. Thus, this study has demonstrated that phyllosilicates in shocked sandstone undergo congruent melting during shock loading. In experiments at 10 GPa and higher, iron melt from the driver plate was injected into the phyllosilicate melts. During this process, Fe is partitioned from the metal droplets into the surrounding silicate melts, which induced unmixing of silicate melts with different chemical properties (liquid immiscibility). At pressures between 7.5 and 15 GPa, a pure SiO₂ glass was formed, which is located as short and thin bands within Qtz grains. These bands were shown to contain tiny crystals of experimentally generated stishovite.