Cover

Complex corona of anorthite + olivine around primary spinel in angrite NWA 3164. Left‐hand side image is general view (backscattered electron image): the anorthite corona developed preferentially at the expense of spinel and extends far from the contact between spinel and clinopyroxene; locally, secondary clinopyroxene and spinel developed between the anorthite corona and primary olivine. Traces of calcite are observed within the late veins. Scale bar: 100 μm. The blue box indicates the enlarged inset (right‐hand side image) showing a detailed view (false‐color image) red: spinel; light green: olivine; dark green: clinopyroxene; violet: anorthite; pink: kamacite and iron oxide; blue: calcite. Olivine in the corona is partly enveloped by clinopyroxene. Small clinopyroxene grains and spinel fi lms formed between the secondary olivine and anorthite that developed around primary spinel. Scale bar: 20 μm. For details see Baghdadi et al. on pp. 1873–1893.     

Petrology and geochemistry of D'Orbigny,geochemistry of Sahara 99555, and the origin of angrites

Abstract— We have done a detailed petrologic study of the angrite, D'Orbigny, and geochemical study of it and Sahara 99555. D'Orbigny is an igneous‐textured rock composed of Ca‐rich olivine, Al‐Ti‐diopside‐hedenbergite, subcalcic kirschsteinite, two generations of hercynitic spinel and anorthite, with the mesostasis phases ulvöspinel, Ca‐phosphate, a silico‐phosphate phase and Fe‐sulfide. We report an unknown Fe‐Ca‐Al‐Ti‐silicate phase in the mesostasis not previously found in angrites. One hercynitic spinel is a large, rounded homogeneous grain of a different composition than the euhedral and zoned grains. We believe the former is a xenocryst, the first such described from angrites. The mafic phases are highly zoned; mg# of cores for olivine are ?64, and for clinopyroxene ?58, and both are zoned to Mg‐free rims. The Ca content of olivine increases with decreasing mg#, until olivine with ?20 mol% Ca is overgrown by subcalcic kirschsteinite with about 30–35 mol% Ca. Detailed zoning sequences in olivine‐subcalcic kirschsteinite and clinopyroxene show slight compositional reversals. There is no mineralogic control that can explain these reversals, and we believe they were likely caused by local additions of more primitive melt during crystallization of D'Orbigny. D'Orbigny is the most ferroan angrite with a bulk rock mg# of 32. Compositionally, it is virtually identical to Sahara 99555; they are the first set of compositionally identical angrites. Comparison with the other angrites shows that there is no simple petrogenetic sequence, partial melting with or without fractional crystallization, that can explain the angrite suite. Angra dos Reis remains an anomalous angrite. Angrites show no evidence for the brecciation, shock, impact metamorphism, or thermal metamorphism that affected the howardite, eucrite, diogenite (HED) suite and ordinary chondrites. This suggests that the angrite parent body may have followed a fundamentally different evolutionary path than did these other parent bodies.     

Asteroid 3628 Božněmcová: Covered with angrite‐like basalts?

Abstract— A detailed analysis of the reflectance spectrum of asteroid 3628 Bo?němcová, previously identified as a possible ordinary chondrite parent body, indicates that its surface consists of an assemblage dominated by clinopyroxene and plagioclase feldspar. The clinopyroxene is Fe²⁺‐bearing (likely in the range Fs_?10–20), with >90% of the Fe²⁺ being present in the M1 crystallographic site (spectral type A). The clinopyroxene:plagioclase feldspar ratio is between ?2 and 3 (?55–75% clinopyroxene, ?20–33% plagioclase feldspar). If olivine is present, the clinopyroxene:olivine ratio is >?3 (<20% olivine). The derived mineralogy of Bo?němcová is most similar, but not identical, to the known angrite meteorites. The data suggest that Bo?němcová formed by melting and differentiation of an oxidized chondritic precursor and probably represents an unsampled angrite‐like body.     

Metamorphosed calcium‐aluminum‐rich inclusions in CK carbonaceous chondrites

CK chondrites are the only group of carbonaceous chondrites with petrologic types ranging from 3 to 6. Although CKs are described as calcium‐aluminum‐rich inclusion (CAI)‐poor objects, the abundance of CAIs in the 18 CK3–6 we analyzed ranges from zero to approximately 16.4%. During thermal metamorphism, some of the fine‐grained CAIs recrystallized as irregular assemblages of plagioclase + Ca‐rich pyroxene ± olivine ± Ca‐poor pyroxene ± magnetite. Coarse‐grained CAIs display zoned spinel, fassaite destabilization, and secondary grossular and spinel. Secondary anorthite, grossular, Ca‐rich pyroxene, and spinel derive from the destabilization of melilite, which is lacking in all CAIs investigated. The Al‐Mg isotopic systematics measured in fine‐ and coarse‐grained CAIs from Tanezrouft (Tnz) 057 was affected by Mg redistribution. The partial equilibration of Al‐Mg isotopic signatures obtained in the core of a coarse‐grained CAI (CG1‐CAI) in Tnz 057 may indicate a lower peak temperature for Mg diffusion of approximately 540–580 °C, while grossular present in the core of this CAI indicates a higher temperature of around 800 °C for the metamorphic event on the parent body of Tnz 057. Excluding metamorphic features, the similarity in nature and abundance of CAIs in CK and CV chondrites confirms that CVs and CKs form a continuous metamorphic series from type 3 to 6.     

Petrography and mineralogy of the ungrouped type 3 carbonaceous chondrite Dar al Gani 978

Dar al Gani (DaG) 978 is an ungrouped type 3 carbonaceous chondrite. In this study, we report the petrography and mineralogy of Ca,Al‐rich inclusions (CAI), amoeboid olivine aggregates (AOAs), chondrules, mineral fragments, and the matrix in DaG 978. Twenty‐seven CAIs were found: 13 spinel‐diopside‐rich inclusions, 2 anorthite‐rich inclusions, 11 spinel‐troilite‐rich inclusions, and 1 spinel‐melilite‐rich inclusion. Most CAIs have a layered texture that indicates a condensation origin and are most similar to those in R chondrites. Compound chondrules represent a high proportion (approximately 8%) of chondrules in DaG 978, which indicates a local dusty chondrule‐forming region and multiple heating events. Most spinel and olivine in DaG 978 are highly Fe‐rich, which corresponds to a petrologic type of >3.5 and a maximum metamorphic temperature of approximately 850–950 K. This conclusion is also supported by other observations in DaG 978: the presence of coarse inclusions of silicate and phosphate in Fe‐Ni metal, restricted Ni‐Co distributions in kamacite and taenite, and low S concentrations in the matrix. Mineralogic records of iron‐alkali‐halogen metasomatism, such as platy and porous olivine, magnetite, hedenbergite, nepheline, Na‐rich in CAIs, and chlorapatite, are present, but relatively limited, in DaG 978. The fine‐grained, intergrowth texture of spinel‐troilite‐rich inclusions was probably formed by reaction between pre‐existing Al‐rich silicates and shock‐induced, high‐temperature S‐rich gas on the surface of the parent body of DaG 978. A shock‐induced vein is present in the matrix of DaG 978, which indicates that the parent body of DaG 978 at least experienced a shock event with a shock stage up to S3.     

An amoeboid olivine inclusion (AOI) in CK3 NWA 1559, comparison to AOIs in CV3 Allende,and the origin of AOIs in CK and CV chondrites

An amoeboid olivine inclusion in CK3 NWA 1559 (0.54 × 1.3 mm) consists of a diopside‐rich interior (approximately 35 vol%) and an olivine‐rich rim (approximately 65 vol%). It is the first AOI to be described in CK chondrites; the apparent paucity of these inclusions is due to extensive parent‐body recrystallization. The AOI interior contains irregular 3–15 μm‐sized Al‐bearing diopside grains (approximately 70 vol%), 2–20 μm‐sized pores (approximately 30 vol%), and traces of approximately 2 μm plagioclase grains. The 75–160 μm‐thick rim contains 20–130 μm‐sized ferroan olivine grains, some with 120º triple junctions. A few coarse (25–50 μm‐sized) patches of plagioclase with 2–18 μm‐thick diopside rinds occur in several places just beneath the rim. The occurrence of olivine rims around AOI‐1 and around many AOIs in CV3 Allende suggests that CK and CV AOIs formed by the acquisition of porous forsteritic rims around fine‐grained, rimless CAIs that consisted of diopside, anorthite, melilite, and spinel. Individual AOIs in carbonaceous chondrites may have formed after transient heating events melted their olivine rims as well as portions of the underlying interiors. In AOI‐1, coarse plagioclase grains with diopside rinds crystallized immediately below the olivine rim. Secondary parent‐body alteration transformed forsterite in the rims of CV and CK AOIs into more‐ferroan olivine. Some of the abundant pores in the interior of AOI‐1 may have formed during aqueous alteration after fine‐grained melilite and anorthite were leached out. Chondrite groups with large chondrules tend to have large AOIs. AOIs that formed in dust‐rich nebular regions (where CV and CK chondrites later accreted) tend to be larger than AOIs from less‐dusty regions.     

XANES and Mg isotopic analyses of spinels in Ca‐Al‐rich inclusions: Evidence for formation under oxidizing conditions

Ti valence measurements in MgAl₂O₄ spinel from calcium‐aluminum‐rich inclusions (CAIs) by X‐ray absorption near‐edge structure (XANES) spectroscopy show that many spinels have predominantly tetravalent Ti, regardless of host phases. The average spinel in Allende type B1 inclusion TS34 has 87% Ti⁺⁴. Most spinels in fluffy type A (FTA) inclusions also have high Ti valence. In contrast, the rims of some spinels in TS34 and spinel grain cores in two Vigarano type B inclusions have larger amounts of trivalent titanium. Spinels from TS34 have approximately equal amounts of divalent and trivalent vanadium. Based on experiments conducted on CAI‐like compositions over a range of redox conditions, both clinopyroxene and spinel should be Ti⁺³‐rich if they equilibrated with CAI liquids under near‐solar oxygen fugacities. In igneous inclusions, the seeming paradox of high‐valence spinels coexisting with low‐valence clinopyroxene can be explained either by transient oxidizing conditions accompanying low‐pressure evaporation or by equilibration of spinel with relict Ti⁺⁴‐rich phases (e.g., perovskite) prior to or during melting. Ion probe analyses of large spinel grains in TS34 show that they are enriched in heavy Mg, with an average Δ²⁵Mg of 4.25 ± 0.028‰, consistent with formation of the spinel from an evaporating liquid. Δ²⁵Mg shows small, but significant, variation, both within individual spinels and between spinel and adjacent melilite hosts. The Δ²⁵Mg data are most simply explained by the low‐pressure evaporation model, but this model has difficulty explaining the high Ti⁺⁴ concentrations in spinel.     

Mineralogical study of brown olivine in Northwest Africa 1950 shergottite and implications for the formation mechanism of iron nanoparticles

Martian meteorites, in particular shergottites, contain darkened olivine (so‐called “brown olivine”) whose color is induced by iron nanoparticles formed in olivine during a shock event. The formation process and conditions of brown olivine have been discussed in the Northwest Africa 2737 (NWA 2737) chassignite. However, formation conditions of brown olivine in NWA 2737 cannot be applied to shergottites because NWA 2737 has a different shock history from that of shergottites. Therefore, this study observed brown olivine in the NWA 1950 shergottite and discusses the general formation process and conditions of brown olivine in shergottites. Our observation of NWA 1950 revealed that olivine is heterogeneously darkened between and within grains different from brown olivine in NWA 2737. XANES analysis showed that brown olivine contains small amounts of Fe³⁺ and TEM/STEM observation revealed that there is no SiO‐rich phase around iron metal nanoparticles. These observations indicate that iron nanoparticles were formed by a disproportionation reaction of olivine (3Fe²⁺_olivine → Fe⁰_metal + 2Fe³⁺_olivine + V_olivine, where V_olivine means a vacancy in olivine). Some parts of brown olivine show lamellar textures in SEM observation and Raman peaks in addition to those expected for olivine, implying that brown olivine experienced a phase transition (to e.g., ringwoodite). In order to induce heterogeneous darkening, heterogeneous high temperature of about 1500–1700 K and shock duration of at least ~90 ms are required. This heterogeneous high temperature resulted in high postshock temperature (>900 K) inducing back‐transformation of most high‐pressure phases. Therefore, in spite of lack of high‐pressure phases, NWA 1950 (= Martian meteorites with brown olivine) experienced higher pressure and temperature compared to other highly shocked meteorite groups.     

A review of the chondrite–achondrite transition,and a metamorphic facies series for equilibrated primitive stony meteorites

Here, the petrological features of numerous primitive achondrites and highly equilibrated chondrites are evaluated to review and expand upon our knowledge of the chondrite–achondrite transition, and primitive achondrites in general. A thermodynamic model for the initial silicate melting temperature and progressive melting for nearly the entire known range of oxidation states is provided, which can be expressed as T_m = 0.035Fa²?3.51Fa + 1109 (in °C, where Fa is the proportion of fayalite in olivine). This model is then used to frame a discussion of textural and mineralogical evolution of stony meteorites with increasing temperature. We suggest that the metamorphic petrology of these meteorites should be based on diffusive equilibration among the silicate minerals, and as such, the chondrite–achondrite transition should be defined by the initial point of silicate melting, not by metal–troilite melting. Evidence of silicate melting is preserved by a distinctive texture of interconnected interstitial plagioclase ± pyroxene networks among rounded olivine and/or pyroxene (depending on ?O₂), which pseudomorph the former silicate melt network. Indirectly, the presence of exsolution lamellae in augite in slowly cooled achondrites also implies that silicate melting occurred because of the high temperatures required, and because silicate melt enhances diffusion. A metamorphic facies series is defined: the Plagioclase Facies is equivalent to petrologic types 5 and 6, the Sub‐calcic Augite Facies is bounded at lower temperatures by the initiation of silicate melting and at higher temperatures by the appearance of pigeonite, which marks the transition to the Pigeonite Facies.     

Petrology and mineralogy of the angrite Northwest Africa 1670

Abstract— Northwest Africa (NWA) 1670, contains olivines of up to 5 mm in size representing about 30% of the studied section. With subordinate clinopyroxene and chrome‐spinel microphenocrysts (0.2‐0.5 mm), they represent a xenocrystic association. Phenocrysts are surrounded by a groundmass, predominantly comprising bundles of plagioclase and clinopyroxene (typically 20 × 200 μm crystals). Olivine and kirschsteinite are present in the groundmass in lesser amounts. The olivine xenocrysts (Fo90) are significantly fractured and show mosaicism for their major part, the remaining showing faint undulatory extinction. They are surrounded with a rim of 100–200 μm zoned down to Fo80 and overgrown with serrated olivine, Fo80 to Fo60 (about 100 μm). Olivine in the groundmass is zoned from Mg# 0.55 to 0.15; its CaO content ranges 2.0 to 8.4%. Subcalcic kirschsteinite is zoned from Mg# 0.13 to 0.03, CaO increasing from 15.8 to 21.3%. Pyroxenes xenocrysts (Mg# = 0.77) are superseded in the groundmass by less magnesian pyroxenes, Mg# 0.61 to 0.17, with an average FeO/ MnO of 98. Their compositions range from En₃₀ Fs₂₂ Wo₂₇ Al‐Ts₂₈ Ti‐Ts₂ to En₂ Fs₃₇ Wo₂₂ Al‐Ts₄₀ Ti‐Ts₁. Anorthite microcrysts (An99‐100) are restricted to the groundmass. Accessories are pyrrhotite, kamacite, Ca‐phosphate, titanomagnetite, hercynite and Ca‐carbonate. The bulk chemical composition confirms that NWA 1670 corresponds to a normal angrite melt that incorporated olivine. High Mg olivine xenocrysts and the associated mineralogy are typical of angrites. We suggest that it is an impact melt with relict phenocrysts. The strong silica undersaturation, the presence of Fo90 olivine xenocrysts and carbonate support their derivation as melilite‐like melts in the presence of carbonate.     

Shock‐induced phase transformation of anorthitic plagioclase in the eucrite meteorite Northwest Africa 2650

Anorthite is an important constituent mineral in basaltic achondrites from small celestial bodies. Its high‐pressure phase transformation in shocked meteorites has not been systematically studied. In this study, we report the diverse phase transformation behaviors of anorthite in a shocked eucrite Northwest Africa (NWA) 2650, which also contains coesite, stishovite, vacancy‐rich clinopyroxene, super‐silicic garnet, and reidite. Anorthite in NWA 2650 has transformed into anorthite glass (anorthite glassy vein, maskelynite, and glass with a schlieren texture and vesicles), tissintite and dissociated into three‐phase assemblage grossular + kyanite + silica glass. Different occurrences of anorthite glass might have formed via the mechanism involving shear melting, solid‐state transformation, and postshock thermally melting, respectively. Tissintite could have crystallized from a high‐pressure plagioclase melt. The nucleation of tissintite might be facilitated by relict pyroxene fragments and the early formed vacancy‐rich clinopyroxene. The three‐phase assemblage grossular, kyanite, and silica glass should have formed from anorthitic melt at high‐pressure and high‐temperature conditions. The presence of maskelynite and reidite probably suggests a minimum peak shock pressure up to 20 GPa, while the other high‐pressure phases indicate that the shock pressure during the crystallization of shock melt veins might vary from >8 GPa to >2 GPa with a heterogeneous temperature distribution.     

Textural and compositional evidence for in situ crystallization of palisade bodies in coarse‐grained Ca‐Al‐rich inclusions

Palisade bodies, mineral assemblages with spinel shells, in coarse‐grained Ca‐, Al‐rich inclusions (CAIs) have been considered either as exotic “mini‐CAIs” captured by their host inclusions (Wark and Lovering 1982 ) or as in situ crystallization products of a bubble‐rich melt (Simon and Grossman 1997 ). In order to clarify their origins, we conducted a comprehensive study of palisade bodies in an Allende Type B CAI (BBA‐7), using electron backscatter diffraction (EBSD), micro‐computed tomography (Micro‐CT), electron probe microanalysis (EPMA), and secondary ion mass spectrometry (SIMS). New observations support the in situ crystallization mechanism: early/residual melt infiltrated into spinel‐shelled bubbles and crystallized inside. Evidence includes (1) continuous crystallography of anorthite from the interior of the palisade body to the surrounding host; (2) partial consolidation of two individual palisade bodies revealed by micro‐CT; (3) a palisade body was entirely enclosed in a large anorthite crystal, and the anorthite within the palisade body shows the same crystallographic orientation as the anorthite host; and (4) identical chemical and oxygen isotopic compositions of the constituent minerals between the palisade bodies and the surrounding host. Oxygen isotopic compositions of the major minerals in BBA‐7 are bimodal‐distributed. Spinel and fassaite are uniformly ¹⁶O‐rich with ?¹⁷O = ?23.3 ± 1.5‰ (2SD), and melilite and anorthite are homogeneously ¹⁶O‐poor with ?¹⁷O = ?3.2 ± 0.7‰ (2SD). The latter ?¹⁷O value overlaps with that of the Allende matrix (?¹⁷O ~ ?2.87‰) (Clayton and Mayeda 1999 ), which could be explained by secondary alteration with a ¹⁶O‐poor fluid in the parent body. The mobility of fluid could be facilitated by the high porosity (1.56–2.56 vol%) and connectivity (~0.17–0.55 vol%) of this inclusion.     

Mineralogy and petrology of the angrite Northwest Africa 1296

Abstract— We report on a new angrite, Northwest Africa (NWA) 1296, a fine‐grained rock with a magmatic texture of rapid cooling. Dendritic olivine (?Fo₅₀) crystallized first in association with anorthite microcrysts (An_98–100) forming composite chains separated from one another by intergrown Al‐Fe diopside‐hedenbergite pyroxenes. In addition, some olivines with lower Mg# and increased CaO (up to 12%) are found between the chains as equant microphenocrysts. Pyroxenes and olivines are both normally zoned from Mg# = 0.52 to less than 0.01 in the rims. Ca‐rich olivines are surrounded by, intergrown with, or replaced by subcalcic kirschsteinite. They appear after plagioclase crystallization stopped, at the end of the crystallization sequence. Minor phases are pyrrhotite, F‐apatite, and titanomagnetite. Pyroxene is the last silicate phase to grow, interstitial to idiomorphic olivine‐kirschsteinite. Numerous small vesicles and some channels are filled with microcristalline carbonate. The mode (vol%) is about 28% olivine, 3% kirschsteinite, 32% anorthite, 34% pyroxene, and 3% of the minor phases—close to that reported previously for D'Orbigny and Sahara (SAH) 99555. The bulk chemical composition of NWA 1296 is similar to D'Orbigny and SAH 99555; NWA 1296 differs by its texture and mineralogy, which are interpreted as resulting from rapid crystallization—an evidence of impact melting. Angrites cannot be produced by partial melting of a CV source because segregation of a “planetary” core is necessary to explain the low FeO/MgO ratio of magnesian olivines. Neither the odd Ca/Al ratio nor the very low SiO₂ content can be explained by conventional partial melting scenarios. We suggest that carbonate is the key to angrite genesis. This is supported by the striking similarities with terrestrial melilitites (low SiO₂, superchondritic Ca/Al ratio, presence of carbonate). The lack of alkalies could be the result of either loss after impact melting or absence of alkalies in the source.     

Anorthite‐rich chondrules in CR and CH carbonaceous chondrites: Genetic link between calcium‐aluminum‐rich inclusions and ferromagnesian chondrules

Abstract— Anorthite‐rich chondrules in CR and CH carbonaceous chondrites consist of magnesian low‐Ca pyroxene and forsterite phenocrysts, FeNi‐metal nodules, interstitial anorthite, Al‐Ti‐Cr‐rich low‐Ca and high‐Ca pyroxenes, and crystalline mesostasis composed of silica, anorthite and high‐Ca pyroxene. Three anorthite‐rich chondrules contain relic calcium‐aluminum‐rich inclusions (CAIs) composed of anorthite, spinel, ±Al‐diopside, and ± forsterite. A few chondrules contain regions which are texturally and mineralogically similar to magnesian (type I) chondrules and consist of forsterite, low‐Ca pyroxene and abundant FeNi‐metal nodules. Anorthite‐rich chondrules in CR and CH chondrites are mineralogically similar to those in CV and CO carbonaceous chondrites, but contain no secondary nepheline, sodalite or ferrosilite. Relatively high abundances of moderately‐volatile elements such as Cr, Mn and Si in the anorthite‐rich chondrules suggest that these chondrules could not have been produced by volatilization of the ferromagnesian chondrule precursors or by melting of the refractory materials only. We infer instead that anorthite‐rich chondrules in carbonaceous chondrites formed by melting of the reduced chondrule precursors (olivine, pyroxenes, FeNi‐metal) mixed with the refractory materials, including relic CAIs, composed of anorthite, spinel, high‐Ca pyroxene and forsterite. The observed mineralogical and textural similarities of the anorthite‐rich chondrules in several carbonaceous chondrite groups (CV, CO, CH, CR) may indicate that these chondrules formed in the region(s) intermediate between the regions where CAIs and ferromagnesian chondrules originated. This may explain the relative enrichment of anorthite‐rich chondrules in ¹⁶O compared to typical ferromagnesian chondrules (Russell et al., 2000).     

Microstructural evidence for complex formation histories of amoeboid olivine aggregates from the ALHA77307 CO3.0 chondrite

The microstructures and compositions of olivine and refractory components in six amoeboid olivine aggregates (AOAs) in the Allan Hills A77307 CO3.0 chondrite have been characterized in detail using the focused ion beam sample preparation technique with transmission electron microscopy. In the AOAs, refractory components (perovskite, melilite, spinel, anorthite, and Al‐Ti‐bearing diopside) provide evidence of a high degree of textural and compositional heterogeneity, suggesting that these phases have formed by disequilibrium gas–solid condensation at high temperatures under highly dynamic conditions. We infer different possible reactions of early‐condensed solid minerals (perovskite and spinel) with a nebular gas, forming diopside with wide ranges of Al and Ti contents and/or anorthite. The progressive, incomplete consumption of spinel in these reactions may have resulted in the Cr enrichment in the remaining, unreacted spinel in the AOAs. In contrast to the refractory components, olivines in the AOAs have equilibrated textures with 120° triple junctions, indicating that the AOAs were subjected to high‐temperature annealing after agglomeration of olivine and refractory components. Because the AOAs consist of fine‐grained olivine grains with numerous pores, the annealing is constrained by experimental data to have occurred for a short duration of the order of a few hours to tens of hours depending on the annealing temperature. In comparison, the effects of annealing on the refractory components are minimal, probably due to pinning of grain boundaries in the multiphase assemblages that inhibited grain growth.     

Reclassification of Hart and Northwest Africa 6047: Criteria for distinguishing between CV and CK3 chondrites

The single parent body model for the CV and CK chondrites (Greenwood et al. 2010 ) was challenged by Dunn et al. ( 2016a ), who argued that magnetite compositions could not be reconciled by a single metamorphic sequence (i.e., CV3 → CK3 → CK4–6). Cr isotopic compositions, which are distinguishable between the CV and CK chondrites, also support two different parent bodies (Yin et al. 2017 ). Despite this, there are many petrographic and mineralogical similarities between the unequilibrated (petrologic type 3) CK chondrites and the CV chondrites (also type 3), which may result in misclassification of samples. Hart and Northwest Africa 6047 (NWA 6047) are an excellent example of this. In this study, we revisit the classification of Hart and NWA 6047 using magnetite compositions, petrography, and compositions of olivine, the most ubiquitous mineral in both CV and CK chondrites. Not only do our results suggest that NWA 6047 and Hart were misclassified, but our assessment of CV and CK3 chondrites has also led to the development of criteria that can be used to distinguish between CV and CK3 chondrites. These criteria include: abundances of Cr₂O₃, TiO₂, NiO, and Al₂O₃ in magnetite; Fa content and NiO abundance of matrix olivine; FeO content of chondrules; and the chondrule:matrix ratio. Classification as a CV chondrite is also supported by the presence of igneous chondrule rims, calcium‐aluminum‐rich inclusions, and an elongated petrofabric. However, none of these petrographic characteristics can be used conclusively to distinguish between CV and CK3 chondrites.     

Petrology and oxygen isotopic compositions of calcium‐aluminum‐rich inclusions in primitive CO3.0‐3.1 chondrites

The petrologic and oxygen isotopic characteristics of calcium‐aluminum‐rich inclusions (CAIs) in CO chondrites were further constrained by studying CAIs from six primitive CO3.0‐3.1 chondrites, including two Antarctic meteorites (DOM 08006 and MIL 090010), three hot desert meteorites (NWA 10493, NWA 10498, and NWA 7892), and the Colony meteorite. The CAIs can be divided into hibonite‐bearing inclusions (spinel‐hibonite spherules, monomineralic grains, hibonite‐pyroxene microspherules, and irregular/nodular objects), grossite‐bearing inclusions (monomineralic grains, grossite‐melilite microspherules, and irregular/nodular objects), melilite‐rich inclusions (fluffy Type A, compact type A, monomineralic grains, and igneous fragments), spinel‐pyroxene inclusions (fluffy objects resembling fine‐grained spinel‐rich inclusions in CV chondrites and nodular/banded objects resembling those in CM chondrites), and pyroxene‐anorthite inclusions. They are typically small (98.4 ± 54.4 µm, 1SD) and comprise 1.54 ± 0.43 (1SD) area% of the host chondrites. Melilite in the hot desert and Colony meteorites was extensively replaced by a hydrated Ca‐Al‐silicate during terrestrial weathering and converted melilite‐rich inclusions into spinel‐pyroxene inclusions. The CAI populations of the weathered COs are very similar to those in CM chondrites, suggesting that complete replacement of melilite by terrestrial weathering, and possibly parent body aqueous alteration, would make the CO CAIs CM‐like, supporting the hypothesis that CO and CM chondrites derive from similar nebular materials. Within the CO3.0‐3.1 chondrites, asteroidal alteration significantly resets oxygen isotopic compositions of CAIs in CO3.1 chondrites (?¹⁷O: ?25 to ?2‰) but left those in CO3.0‐3.05 chondrites mostly unchanged (?¹⁷O: ?25 to ?20‰), further supporting the model whereby thermal metamorphism became evident in CO chondrites of petrologic type ≥3.1. The resistance of CAI minerals to oxygen isotope exchange during thermal metamorphism follows in the order: melilite + grossite < hibonite + anorthite < spinel + diopside + forsterite. Meanwhile, terrestrial weathering destroys melilite without changing the chemical and isotopic compositions of melilite and other CAI minerals.     

Heavily metamorphosed clasts from the CV chondrite breccias Mokoia and Yamato‐86009

Abstract– Metamorphosed clasts in the CV carbonaceous chondrite breccias Mokoia and Yamato‐86009 (Y‐86009) are coarse‐grained, granular, polymineralic rocks composed of Ca‐bearing (up to 0.6 wt% CaO) ferroan olivine (Fa_34–39), ferroan Al‐diopside (Fs_9–13Wo_47–50, approximately 2–7 wt% Al₂O₃), plagioclase (An_37–84Ab_63–17), Cr‐spinel (Cr/(Cr + Al) = 0.19–0.45, Fe/(Fe + Mg) = 0.60–0.79), nepheline, pyrrhotite, pentlandite, Ca‐phosphate, and rare grains of Ni‐rich taenite; low‐Ca pyroxene is absent. Most clasts have triple junctions between silicate grains, indicative of prolonged thermal annealing. Based on the olivine‐spinel and pyroxene thermometry, the estimated metamorphic temperature recorded by the clasts is approximately 1100 K. Few clasts experienced thermal metamorphism to a lower degree and preserved chondrule‐like textures. The Mokoia and Y‐86009 clasts are mineralogically unique and different from metamorphosed chondrites of known groups (H, L, LL, R, EH, EL, CO, CK) and primitive achondrites (acapulcoites, brachinites, lodranites). On a three‐isotope oxygen diagram, compositions of olivine in the clasts plot along carbonaceous chondrite anhydrous mineral line and the Allende mass‐fractionation line, and overlap with those of the CV chondrule olivines; the Δ¹⁷O values of the clasts range from about ?4.3‰ to ?3.0‰. We suggest that the clasts represent fragments of the CV‐like material that experienced metasomatic alteration, high‐temperature metamorphism, and possibly melting in the interior of the CV parent asteroid. The lack of low‐Ca pyroxene in the clasts could be due to its replacement by ferroan olivine during iron‐alkali metasomatic alteration or by high‐Ca ferroan pyroxene during melting under oxidizing conditions.     

Calcium‐aluminum‐rich inclusions and amoeboid olivine aggregates from the CR carbonaceous chondrites

Abstract— Calcium‐aluminum‐rich refractory inclusions (CAIs) in CR chondrites are rare (<1 vol%), fairly small (<500 μm) and irregularly‐shaped, and most of them are fragmented. Based on the mineralogy and petrography, they can be divided into grossite ± hibonite‐rich, melilite‐rich, and pyroxene‐anorthite‐rich CAIs. Other types of refractory objects include fine‐grained spinel‐melilite‐pyroxene aggregates and amoeboid olivine aggregates (AOAs). Some of the pyroxene‐anorthite‐rich CAIs have igneous textures, and most melilite‐rich CAIs share similarities to both the fluffy and compact type A CAIs found in CV chondrites. One major difference between these CAIs and those in CV, CM, and CO chondrites is that secondary mineral phases are rare. In situ ion microprobe analyses of oxygen‐isotopic compositions of 27 CAIs and AOAs from seven CR chondrites demonstrate that most of the CAIs are ¹⁶O‐rich (δ¹⁷O of hibonite, melilite, spinel, pyroxene, and anorthite < ?22‰) and isotopically homogeneous within 3–4‰. Likewise, forsterite, spinel, anorthite, and pyroxene in AOAs have nearly identical, ¹⁶O‐rich compositions (?24‰ < δ¹⁷O < ?20‰). In contrast, objects which show petrographic evidence for extensive melting are not as ¹⁶O‐rich (δ¹⁷O less than ?18‰). Secondary alteration minerals replacing ¹⁶O‐rich melilite in melilite‐rich CAIs plot along the terrestrial fractionation line. Most CR CAIs and AOAs are mineralogically pristine objects that largely escaped thermal metamorphism and secondary alteration processes, which is reflected in their relatively homogeneous ¹⁶O‐rich compositions. It is likely that these objects (or their precursors) condensed in an ¹⁶O‐rich gaseous reservoir in the solar nebula. In contrast, several igneous CAIs are not very enriched in ¹⁶O, probably as a result of their having melted in the presence of a relatively ¹⁶O‐poor nebular gas. If the precursors of these CAIs were as ¹⁶O‐rich as other CR CAIs, this implies either temporal excursions in the isotopic composition of the gas in the CAI‐forming regions and/or radial transport of some CAI precursors into an ¹⁶O‐poor gas. The absence of oxygen isotope heterogeneity in the primary minerals of melilite‐rich CAIs containing alteration products suggests that mineralogical alteration in CR chondrites did not affect oxygen‐isotopic compositions of their CAIs.     

Experimental simulation of oxygen isotopic exchange in olivine and implication for the formation of metamorphosed carbonaceous chondrites

We have conducted hydration–dehydration experiments on terrestrial olivine to investigate the behavior of oxygen isotopic fractionation to test the hypothesis that multiple cycles of aqueous and thermal processing on a parent asteroid comprise a genetic relationship between CM2s and metamorphosed carbonaceous chondrites (MCCs). Two experiments were undertaken. In the first experiment, serpentine was obtained by hydrating terrestrial olivine (Fo_90.9) in the laboratory. During this experiment, olivine was reacted with isotopically heavy water (δ¹⁸O 21.5‰) at T = 300 °C,  = 300 bar, for 100 days. The oxygen isotopic composition of the experimental serpentine was enriched in ¹⁸O (by 10 ‰ in δ¹⁸O) due to exchange of oxygen isotopes between olivine and the ¹⁸O‐rich water. Dehydrated serpentine was then produced during laboratory heating experiment in vacuum, at T = 930 °C, for 1 h. The oxygen isotopic composition of the dehydrated serpentine was enriched in ¹⁸O by a further 7 ‰. The net result of the hydration–dehydration process was an enrichment of ¹⁸O in the final material by approximately 17‰. The new experimental results suggest that the oxygen isotopic compositions of MCCs of the Belgica‐like group, including Dhofar 225 and Dhofar 725, could be derived from those of typical CM2 chondrites via several cycles of hydration–dehydration caused by aqueous alteration and subsequent thermal metamorphism within their parent asteroids.