Ultrahigh-pressure metamorphism in the forbidden zone: the Xugou garnet peridotite, Sulu terrane, eastern China

The Xugou garnet peridotite body of the southern Sulu ultrahigh‐pressure (UHP) terrane is enclosed in felsic gneiss, bounded by faults, and consists of harzburgite and lenses of garnet clinopyroxenite and eclogite. The peridotite is composed of variable amounts of olivine (Fo₉₁), enstatite (En_92?93), garnet (Alm_20?23Prp_53?58Knr_6?9Grs_12?18), diopside and rare chromite. The ultramafic protolith has a depleted residual mantle composition, indicated by a high‐Mg number, very low CaO, Al₂O₃ and total REE contents compared to primary mantle and other Sulu peridotites. Most garnet (Prp_44?58) clinopyroxenites are foliated. Except for rare kyanite‐bearing eclogitic bands, most eclogites contain a simple assemblage of garnet (Alm_29?34Prp_32?50Grs_15?39) + omphacite (Jd_24?36) + minor rutile. Clinopyroxenite and eclogite exhibit LREE‐depleted and LREE‐enriched patterns, respectively, but both have flat HREE patterns. Normalized La, Sm and Yb contents indicate that both eclogite and garnet clinopyroxenite formed by high‐pressure crystal accumulation (+ variable trapped melt) from melts resulting from two‐stage partial melting of a mantle source. Recrystallized textures and P–T estimates of 780–870 °C, 5–7 GPa and a metamorphic age of 231 ± 11 Ma indicate that both mafic and ultramafic protoliths experienced Triassic UHP metamorphism in the P–T forbidden zone with an extremely low thermal gradient (< 5 °C km^?1), and multistage retrograde recrystallization during exhumation. Develop of prehnite veins in clinopyroxenite, eclogite, felsic blocks and country rock gneiss, and replacements of eclogitic minerals by prehnite, albite, white mica, and K‐feldspar indicate low‐temperature metasomatism.     

Constraining peak P–T conditions in UHP eclogites: calculated phase equilibria in kyanite‐ and phengite‐bearing eclogite of the Tromsø Nappe,Norway

Kyanite‐ and phengite‐bearing eclogites have better potential to constrain the peak metamorphic P–T conditions from phase equilibria between garnet + omphacite + kyanite + phengite + quartz/coesite than common, mostly bimineralic (garnet + omphacite) eclogites, as exemplified by this study. Textural relationships, conventional geothermobarometry and thermodynamic modelling have been used to constrain the metamorphic evolution of the Tromsdalstind eclogite from the Tromsø Nappe, one of the biggest exposures of eclogite in the Scandinavian Caledonides. The phase relationships demonstrate that the rock progressively dehydrated, resulting in breakdown of amphibole and zoisite at increasing pressure. The peak‐pressure mineral assemblage was garnet + omphacite + kyanite + phengite + coesite, inferred from polycrystalline quartz included in radially fractured omphacite. This omphacite, with up to 37 mol.% of jadeite and 3% of the Ca‐Eskola component, contains oriented rods of silica composition. Garnet shows higher grossular (X_Grs = 0.25–0.29), but lower pyrope‐content (X_Prp = 0. 37–0.39) in the core than the rim, while phengite contains up to 3.5 Si pfu. The compositional isopleths for garnet core, phengite and omphacite constrain the P–T conditions to 3.2–3.5 GPa and 720–800 °C, in good agreement with the results obtained from conventional geothermobarometry (3.2–3.5 GPa & 730–780 °C). Peak‐pressure assemblage is variably overprinted by symplectites of diopside + plagioclase after omphacite, biotite and plagioclase after phengite, and sapphirine + spinel + corundum + plagioclase after kyanite. Exhumation from ultrahigh‐pressure (UHP) conditions to 1.3–1.5 GPa at 740–770 °C is constrained by the garnet rim (X_Ca^Grt = 0.18–0.21) and symplectite clinopyroxene (X_Na^Cpx = 0.13–0.21), and to 0.5–0.7 GPa at 700–800 °C by sapphirine (X_Mg = 0.86–0.87) and spinel (X_Mg = 0.60–0.62) compositional isopleths. UHP metamorphism in the Tromsø Nappe is more widespread than previously known. Available data suggest that UHP eclogites were uplifted to lower crustal levels rapidly, within a short time interval (452–449 Ma) prior to the Scandian collision between Laurentia and Baltica. The Tromsø Nappe as the highest tectonic unit of the North Norwegian Caledonides is considered to be of Laurentian origin and UHP metamorphism could have resulted from subduction along the Laurentian continental margin. An alternative is that the Tromsø Nappe belonged to a continental margin of Baltica, which had already been subducted before the terminal Scandian collision, and was emplaced as an out‐of‐sequence thrust during the Scandian lateral transport of nappes.     

Application of K-feldspar–jadeite–quartz barometry to eclogite facies metagranites and metapelites in the Sesia Lanzo Zone (Western Alps, Italy)*

The eclogite facies assemblage K-feldspar–jadeite–quartz in metagranites and metapelites from the Sesia-Lanzo Zone (Western Alps, Italy) records the equilibration pressure by dilution of the reaction jadeite+quartz=albite. The metapelites show partial transformation from a pre-Alpine assemblage of garnet (Alm₆₃Prp₂₆Grs₁₀)–K-feldspar–plagioclase–biotite±sillimanite to the Eo-Alpine high-pressure assemblage garnet (Alm₅₀Prp₁₄Grs₃₅)–jadeite (Jd_80–97Di_0–4Hd_0–8Acm_0–7)–zoisite–phengite. Plagioclase is replaced by jadeite–zoisite–kyanite–K-feldspar–quartz, and biotite is replaced by garnet–phengite or omphacite–kyanite–phengite. Equilibrium was attained only in local domains in the metapelites and therefore the K-feldspar–jadeite–quartz (KJQ) barometer was applied only to the plagioclase pseudomorphs and K-feldspar domains. The albite content of K-feldspar ranges from 4 to 11 mol% in less equilibrated assemblages from Val Savenca and from 4 to 7 mol% in the partially equilibrated samples from Monte Mucrone and the equilibrated samples from Montestrutto and Tavagnasco. Thermodynamic calculations on the stability of the assemblage K-feldspar–jadeite–quartz using available mixing data for K-feldspar and pyroxene indicate pressures of 15–21 kbar (±1.6–1.9 kbar) at 550±50 °C. This barometer yields direct pressure estimates in high-pressure rocks where pressures are seldom otherwise fixed, although it is sensitive to analytical precision and the choice of thermodynamic mixing model for K-feldspar. Moreover, the KJQ barometer is independent of the ratio PH2O/P_T. The inferred limiting a(H₂O) for the assemblage jadeite–kyanite in the metapelites from Val Savenca is low and varies from 0.2 to 0.6.     

Eclogites and eclogites in the Western Gneiss Region, Norwegian Caledonides

The Western Gneiss Region (WGR) marks the outcrop of a composite terrane consisting of variably re-worked Proterozoic basement and parautochthonous or autochthonous cover units. The WGR exhibits a gross structural, petrographic and thermobarometric zonation from southeast to northwest, reflecting an increasing intensity of Scandian (late Palaeozoic) metamorphic and structural imprint. Scandian-aged eclogites have been widely (though for kinetic reasons not invariably) stabilised in metabasic rocks but have suffered varying degrees of retrogression during exhumation. In the region between the Jostedal mountains and Nordfjord, eclogites commonly have distinctively prograde-zoned garnets with amphibolite or epidote–amphibolite facies solid inclusion suites and lack any evidence for stability of coesite (high pressure [HP] eclogites). In the south of this area, in Sunnfjord, eclogites locally contain glaucophane as an inclusion or matrix phase. North of Nordfjord, eclogites mostly lack prograde zoning and evidence for coesite, either as relics or replacive polycrystalline quartz, is present in both eclogites (ultrahigh pressure [UHP] eclogites) and, rarely, gneisses. Coesite or polycrystalline quartz after coesite has now been found in eight new localities, including one close to a microdiamond-bearing gneiss. These new discoveries suggest that, by a conservative estimate, the UHP terrane in the WGR covers a coastal strip of about 5000 km² between outer Nordfjord and Moldefjord. A “mixed HP/UHP zone” containing both HP and UHP eclogites is confirmed by our observations, and is extended a further 40 km east along Nordfjord. Thermobarometry on phengite-bearing eclogites has been used to quantify the regional distribution of pressure (P) and temperature (T) across the WGR. Overall, a scenario emerges where P and T progressively increase from 500°C and 16 kbar in Sunnfjord to >800°C and 32 kbar in outer Moldefjord, respectively, in line with the distribution of eclogite petrographic features. Results are usually consistent with the silica polymorph present or inferred. The P–T conditions define a linear array in the P–T plane with a slope of roughly 5°C/km, with averages for petrographic groups lying along the trend according to their geographic distribution from SE to NW, hence defining a clear field gradient. This P–T gradient might be used to support the frequently postulated model for northwesterly subduction of the WGC as a coherent body. However, the WGC is clearly a composite edifice built from several tectonic units. Furthermore, the mixed HP/UHP zone seems to mark a step in the regional P gradient, indicating a possible tectonic break and tectonic juxtaposition of the HP and UHP units. Lack of other clear evidence for a tectonic break in the mixed zone dictates caution in this interpretation, and we cannot discount the possibility that the mixed zone is, at least, partly a result of kinetic factors operating near the HP–UHP transition. Overall, if the WGC has been subducted during the Scandian orogeny, it has retained its general down-slab pattern of P and T in spite of any disruption during exhumation. Garnetiferous peridotites derived from subcontinental lithospheric mantle may be restricted to the UHP terrane and appear to decorate basement-cover contacts in many cases. P–T conditions calculated from previously published data for both relict (Proterozoic lithospheric mantle?) porphyroclast assemblages and Scandian (subduction-related?) neoblastic assemblages do not define such a clear field gradient, but probably record a combination of their pre-orogenic P–T record with Scandian re-working during and after subduction entrainment. A crude linear array in the P–T plane defined by peridotite samples may be, in part, an artifact of errors in the geobarometric methods. A spatial association of mantle-derived peridotites with the UHP terrane and with basement-cover contacts is consistent with a hypothesis for entrainment of at least some of them as “foreign” fragments into a crustal UHP terrane during subduction of the Baltic continental margin to depths of >100 km, and encourages a more mobilistic view of the assembly of the WGC from its component lithotectonic elements.     

Two-stage decompression in garnet-bearing mafic granulites from Sostrene Island, Prydz Bay, East Antarctica

Mafic garnet-bearing granulites from Sostrene Island, 150 km southwest of Davis Station on the coast of Prydz Bay, East Antarctica, exhibit two-stage symplectic coronas on garnet, formed after peak metamorphic conditions (M1). An outer corona of Opx (Mg₆₆) + Pl (An_94–97) + minor Hbl mantles a finer-grained inner corona of Opx (Mg₆₇) + Pl (An_95–96) + Spl (Mg₃₆). Both symplectites contain minor ilmenite–magnetite intergrowths. The finer-grained symplectite also occurs along a fracture cleavage in the garnet. The outer corona originated during a second metamorphic event (M2) via the reaction Grt + Cpx (Hbl) + SiO₂= Opx + Pl (1), whereas the inner corona formed later in response to decompression and minor deformation, resulting in the fracture cleavage in the garnet, according to the reaction Grt = Opx + Pl + Spl (2). The grossular content of the garent (X_Grs= 0.168) is almost exactly that which is required for the stoichiometric breakdown by reaction (2) (calculated X_Grs= 0.167). The mafic rocks are silica undersaturated, and the SiO₂ for reaction (1) was most probably derived externally from the surrounding felsic gneisses. Preferred P–T estimates for M1 based on garnet core (Prp₄₀Alm₄₂Grs₁₇Sps₁)–matrix Opx–Cpx–Hbl pairs are c. 10 kbar at 980°C. The fine-grained symplectite formed post-peak M2 at c. 7 kbar and 850°C. The enclosing felsic gneisses yield pressure estimates of between 5 and 7 kbar, which compare with conditions of c. 6 kbar and 775°C in the nearby Bolingen Islands. These lower P–T estimates are considered to be representative of the widespread 1100-Ma metamorphic event recognized in outcrops along the Prydz Bay coast. The high-P, high-T estimates derived from the garnet relics provide evidence for an earlier, possibly Archaean, high-grade metamorphic event.     

Integrated pressure–temperature–time constraints for the Tso Morari dome (Northwest India): implications for the burial and exhumation path of UHP units in the western Himalaya

Northward subduction of the leading edge of the Indian continental margin to depths greater than 100 km during the early Eocene resulted in high‐pressure (HP) quartz‐eclogite to ultrahigh‐pressure (UHP) coesite–eclogite metamorphism at Tso Morari, Ladakh Himalaya, India. Integrated pressure–temperature–time determinations within petrographically well‐constrained settings for zircon‐ and/or monazite‐bearing assemblages in mafic eclogite boudins and host aluminous gneisses at Tso Morari uniquely document segments of both the prograde burial and retrograde exhumation path for HP/UHP units in this portion of the western Himalaya. Poikiloblastic cores and inclusion‐poor rims of compositionally zoned garnet in mafic eclogite were utilized with entrapped inclusions and matrix minerals for thermobarometric calculations and isochemical phase diagram construction, the latter thermodynamic modelling performed with and without the consideration of cation fractionation into garnet during prograde metamorphism. Analysis of the garnet cores document (M1) conditions of 21.5 ± 1.5 kbar and 535 ± 15 °C during early garnet growth and re‐equilibration. Sensitive high resolution ion microprobe (SHRIMP) U–Pb analysis of zircon inclusions in garnet cores yields a maximum age determination of 58.0 ± 2.2 Ma for M1. Peak HP/UHP (M2) conditions are constrained at 25.5–27.5 kbar and 630–645 °C using the assemblage garnet rim–omphacite–rutile–phengite–lawsonite–talc–quartz (coesite), with mineral compositional data and regional considerations consistent with the upper P–T bracket. A SHRIMP U–Pb age determination of 50.8 ± 1.4 Ma for HP/UHP metamorphism is given by M2 zircons analysed in the eclogitic matrix and that are encased in the garnet rim. Two garnet‐bearing assemblages from the Puga gneiss (host to the mafic eclogites) were utilized to constrain the subsequent decompression path. A non‐fractionated isochemical phase diagram for the assemblage phengite–garnet–biotite–plagioclase–quartz–melt documents a restricted (M3) P–T stability field centred on 12.5 ± 0.5 kbar and 690 ± 25 °C. A second non‐fractionated isochemical phase diagram calculated for the lower pressure assemblage garnet–cordierite–sillimanite–biotite–plagioclase–quartz–melt (M4) documents a narrow P–T stability field ranging between 7–8.4 kbar and 705–755 °C, which is consistent with independent multiequilibria P–T determinations. Th–Pb SHRIMP dating of monazite cores surrounded by allanite rims is interpreted to constrain the timing of the M4 equilibration to 45.3 ± 1.1 Ma. Coherently linking metamorphic conditions with petrographically constrained ages at Tso Morari provides an integrated context within which previously published petrological or geochronological results can be evaluated. The new composite path is similar to those published for the Kaghan UHP locality in northern Pakistan, although the calculated 12‐mm a^?1 rate of post‐pressure peak decompression at Tso Morari would appear less extreme.     

The effect of chemical composition and oxygen fugacity on the electrical conductivity of dry and hydrous garnet at high temperatures and pressures

The in situ electrical conductivity of hydrous garnet samples (Py₂₀Alm₇₆Grs₄–Py₇₃Alm₁₄Grs₁₃) was determined at pressures of 1.0–4.0 GPa and temperatures of 873–1273 K in the YJ-3000t apparatus using a Solartron-1260 impedance/gain-phase analyzer for various chemical compositions and oxygen fugacities. The oxygen fugacity was controlled by five solid-state oxygen buffers (Fe₂O₃ + Fe₃O₄, Ni + NiO, Fe + Fe₃O₄, Fe + FeO, and Mo + MoO₂). Experimental results indicate that within a frequency range from 10⁻² to 10⁶ Hz, electrical conductivity is strongly dependent on signal frequency. Electrical conductivity shows an Arrhenius increase with temperature. At 2.0 GPa, the electrical conductivity of anhydrous garnet single crystals with various chemical compositions (Py₂₀Alm₇₆Grs₄, Py₃₀Alm₆₇Grs₃, Py₅₆Alm₄₃Grs₁, and Py₇₃Alm₁₄Grs₁₃) decreases with increasing pyrope component (Py). With increasing oxygen fugacity, the electrical conductivity of dry Py₇₃Alm₁₄Grs₁₃ garnet single crystal shows an increase, whereas that of a hydrous sample with 465 ppm water shows a decrease, both following a power law (exponents of 0.061 and −0.071, respectively). With increasing pressure, the electrical conductivity of this hydrous garnet increases, along with the pre-exponential factors, and the activation energy and activation volume of hydrous samples are 0.7731 ± 0.0041 eV and −1.4 ± 0.15 cm³/mol, respectively. The results show that small hopping polarons ( \textFe_\textMg ^· ) \left( {{\text{Fe}}_{\text{Mg}}^{ \cdot } } \right) and protons ( \textH ^· {\text{H}}^{ \cdot } ) are the dominant conduction mechanisms for dry and wet garnet single crystals, respectively. Based on these results and the effective medium theory, we established the electrical conductivity of an eclogite model with different mineral contents at high temperatures and high pressures, thereby providing constraints on the inversion of field magnetotelluric sounding results in future studies.     

Chemical composition and evolution of the garnets in the Astamal Fe-LREE distal skarn deposit,Qara-Dagh–Sabalan metallogenic belt,Lesser Caucasus,NW Iran

The chemistry of garnet can provide clues to the formation of skarn deposits. The chemical analyses of garnets from the Astamal Fe-LREE distal skarn deposit were completed using an electron probe micro-analyzer. The three types of garnet were identified in the Astamal skarn are: (I) euhedral coarse-grained isotropic garnets (10–30 mm across), which are strongly altered to epidote, calcite and quartz in their rim and core, with intense pervasive retrograde alteration and little variation in the overall composition (Adr_94.3–84.4 Grs_8.5–2.7 Alm_1.9–0.2) (garnet I); (II) anhedral to subhedral brecciated isotropic garnets (5–10 mm across) with minor alteration, a narrow compositional range along the growth lines (Adr_82–65.4 Grs_21.9–11.7 Alm_11.1–2.4) and relatively high Cu (up to 1997 ppm) and Ni (up to 1283 ppm) (garnet II); and (III) subhedral coarser grained garnets (> 30 mm across) with moderate alteration, weak diffusion and irregular zoning of discrete grossular-almandine-rich domains (Adr_84.2–48.8 Grs_32.4–7.6 Alm_19.9–3.5) (garnet III). In the third type, the almandine content increases with increasing grossular/andradite ratio and increasing substitutions of Al for Fe^3 +.Almost all three garnet types have been replaced by fine-grained, dark-brown allanite that is typically disseminated and has the same relief as andradite. The Cu content increases while Ni content decreases slightly towards the rim of garnet II and garnet III. Copper in garnet II is positively correlated with increasing almandine content and decreasing andradite content, indicating that the almandine structure, containing relatively more Fe^2 +, is more suitable than andradite and grossular to host divalent cations such as Cu^2 +. Nickel in garnet II is positively correlated with increasing andradite content, total Fe, and decreasing almandine content. This is because Ni^2 + substitutes for Fe^3 + in the Y (octahedral) position. There are unusual discrete grossular-almandine rich domains within andraditic garnet III, indicating the low diffusivity of Ca compared to Fe at high temperatures.     

Partial melting due to breakdown of an epidote‐group mineral during exhumation of ultrahigh‐pressure eclogite: An example from the North‐East Greenland Caledonides

In the North‐East Greenland Caledonides, P–T conditions and textures are consistent with partial melting of ultrahigh‐pressure (UHP) eclogite during exhumation. The eclogite contains a peak assemblage of garnet, omphacite, kyanite, coesite, rutile, and clinozoisite; in addition, phengite is inferred to have been present at peak conditions. An isochemical phase equilibrium diagram, along with garnet isopleths, constrains peak P–T conditions to be subsolidus at 3.4 GPa and 940°C. Zr‐in‐rutile thermometry on inclusions in garnet yields values of ~820°C at 3.4 GPa. In the eclogite, plagioclase may exhibit cuspate textures against surrounding omphacite and has low dihedral angles in plagioclase–clinopyroxene–garnet aggregates, features that are consistent with former melt–solid–solid boundaries and crystallized melt pockets. Graphic intergrowths of plagioclase and amphibole are present in the matrix. Small euhedral neoblasts of garnet against plagioclase are interpreted as formed from a peritectic reaction during partial melting. Polymineralic inclusions of albite+K‐feldspar and clinopyroxene+quartz±kyanite±plagioclase in large anhedral garnet display plagioclase cusps pointing into the host, which are interpreted as crystallized melt pockets. These textures, along with the mineral composition, suggest partial melting of the eclogite by reactions involving phengite and, to a large extent, an epidote‐group mineral. Calculated and experimentally determined phase relations from the literature reveal that partial melting occurred on the exhumation path, at pressures below the coesite to quartz transition. A calculated P–T phase diagram for a former melt‐bearing domain shows that the formation of the peritectic garnet rim occurred at 1.4 GPa and 900°C, with an assemblage of clinopyroxene, amphibole, and plagioclase equilibrated at 1.3 GPa and 720°C. Isochemical phase equilibrium modelling of a symplectite of clinopyroxene, plagioclase, and amphibole after omphacite, combined with the mineral composition, yields a P–T range at 1.0–1. 6 GPa, 680–1,000°C. The assemblage of amphibole and plagioclase is estimated to reach equilibrium at 717–732°C, calculated by amphibole–plagioclase thermometry for the former melt‐bearing domain and symplectite respectively. The results of this study demonstrate that partial melt formed in the UHP eclogite through breakdown of an epidote‐group mineral with minor involvement of phengite during exhumation from peak pressure; melt was subsequently crystallized on the cooling path.     

Metamorphic evolution of the coesite-bearing ultrahigh-pressure terrane in the North Qaidam, Northern Tibet, NW China

Widespread evidence for ultrahigh‐pressure (UHP) metamorphism is reported in the Dulan eclogite‐bearing terrane, the North Qaidam–Altun HP–UHP belt, northern Tibet. This includes: (1) coesite and associated UHP mineral inclusions in zircon separates from paragneiss and eclogite (identified by laser Raman spectroscopy); (2) inclusions of quartz pseudomorphs after coesite and polycrystalline K‐feldspar + quartz in eclogitic garnet and omphacite; and (3) densely oriented SiO₂ lamellae in omphacitic clinopyroxene. These lines of evidence demonstrate that the Dulan region is a UHP metamorphic terrane. In the North Dulan Belt (NDB), eclogites are characterized by the peak assemblage Grt + Omp + Rt + Phn + Coe (pseudomorph) and retrograde symplectites of Cpx + Ab and Hbl + Pl. The peak conditions of the NDB eclogites are P = 2.9–3.2 GPa, and T = 631–687 °C; the eclogite shows a near‐isothermal decompression P–T path suggesting a fast exhumation. In the South Dulan Belt (SDB), three metamorphic stages are recognized in eclogites: (1) a peak eclogite facies stage with the assemblage Grt + Omp + Ky + Rt + Phn at P = 2.9–3.3 GPa and T = 729–746 °C; (2) a high‐pressure granulite facies stage with Grt + Cpx (Jd < 30) + Pl (An24–29) + Scp at P = 1.9–2.0 GPa, T = 873–948 °C; and (3) an amphibolite facies stage with the assemblage Hbl + Pl + Ep/Czo at P = 0.7–0.9 GPa and T = 660–695 °C. The clockwise P–T path of the SDB eclogites is different from the near‐isothermal decompression P–T path from the NDB eclogites, which suggests that the SDB was exhumed to a stable crustal depth at a slower rate. In essence these two sub‐belts formed in different tectonic settings; they both subducted to mantle depths of around 100 km, but were exhumed to the Earth's surface separately along different paths. This UHP terrane plays an important role in understanding continental collision in north‐western China.     

Pressure-temperature path of Sanbagawa prograde metamorphism deduced from grossular zoning of garnet

The zonal structure of prograde garnet in pelitic schists from the medium-grade garnet zone and the higher-grade albite-biotite zone was examined to investigate the evolution of prograde P–T paths of the Sanbagawa metamorphism. The garnet studied shows a bell-shaped chemical zoning of the spessartine component, which decreases in abundance from the core towards the rim. Almandine and pyrope contents and X_Mg [=Mg/(Mg+Fe²⁺)] increase monotonously outwards. The general scheme of the zonal structure for grossular content [X_Grs=Ca/(Fe²⁺+Mn+Mg+Ca)] can be summarized as: (1) X_Grs increases outwards (inner segment) and reaches a maximum at an intermediate position between the crystal core and the rim, then decreases towards the outermost rim (outer segment) (2) the inner segment of garnet in the garnet zone samples tends to have a higher X_Grs/X_Sps values for a given X_Sps than those in the albite–biotite zone samples (3) average X_Sps at the maximum X_Grs position in the albite–biotite zone samples ranges from 0.02 to 0.12 and is lower than that in the garnet zone samples (0.13–0.32) (4) the maximum X_Grs in the albite–biotite zone samples (0.34–0.39 on average) tends to be higher than that in the garnet zone samples (0.26–0.36), and (5) differences of X_Grs between the maximum and rim in the albite–biotite zone samples are between 0.10 and 0.14 and higher than those in the garnet zone samples (< 0.11). These facts imply that albite–biotite zone materials (a) were recrystallized under lower dP/dT conditions at an early stage of the prograde metamorphism (b) began their exhumation under higher P–T conditions and (c) have been continuously heated during exhumation for a longer duration than the garnet zone materials. The systematic changes of prograde P–T paths can be interpreted as documenting the evolution of the Sanbagawa subduction zone.     

Integrating X‐ray mapping and microtomography of garnet with thermobarometry to define the P–T evolution of the (near) UHP Międzygórze eclogite,Sudetes, SW Poland

Detailed X‐ray compositional mapping and microtomography have revealed the complex zoning and growth history of garnet in a kyanite‐bearing eclogite. The garnet occurs as clusters of coalesced grains with cores revealing slightly higher Ca and lower Mg than the rims forming the coalescence zones between the grains. Core regions of the garnet host inclusions of omphacite with the highest jadeite, and phengite with the highest Si, similar to values in the cores of omphacite and phengite located in the matrix. Therefore, the core compositions of garnet, omphacite, and phengite have been chosen for the peak pressure estimate. Coupled conventional thermobarometry, average P–T, and phase equilibrium modelling in the NCKFMMnASHT system yields P–T conditions of 26–30 kbar at 800–930°C. Although coesite is not preserved, these P–T conditions partially overlap the coesite stability field, suggesting near ultra‐high–pressure (UHP) conditions during the formation of this eclogite. Therefore, the peak pressure assemblage is suggested to have been garnet–omphacite–kyanite–phengite–coesite/quartz–rutile. Additional lines of evidence for the possible UHP origin of the Mi?dzygórze eclogite are the presence of rod‐shaped inclusions of quartz parallel to the c‐axis in omphacite as well as relatively high values of Ca‐Tschermak and Ca‐Eskola components. Late zoisite, rare diopside–plagioclase symplectites rimming omphacite, and minor phlogopite–plagioclase symplectites replacing phengite formed during retrogression together with later amphibole. These retrograde assemblages lack minerals typical of granulite facies, which suggests simultaneous decompression and cooling during exhumation before the crustal‐scale folding that was responsible for final exhumation of the eclogite.     

Geothermobarometry of UHP and HP eclogites and schists – an evaluation of equilibria among garnet–clinopyroxene–kyanite–phengite–coesite/quartz

Geothermometry of eclogites and other high pressure (HP)/ultrahigh‐pressure (UHP) rocks has been a challenge, due to severe problems related to the reliability of the garnet–clinopyroxene Fe–Mg exchange thermometer to omphacite‐bearing assemblages. Likewise, reliable geobarometers for eclogites and related HP/UHP rocks are scarce. In this paper, a set of internally consistent geothermobarometric expressions have been formulated for reactions between the UHP assemblage garnet–clinopyroxene–kyanite–phengite–coesite, and the corresponding HP assemblage garnet–clinopyroxene–kyanite–phengite–quartz. In the system KCMASH, the end members grossular (Grs) and pyrope (Prp) in garnet, diopside (Di) in clinopyroxene, muscovite (Ms) and celadonite (Cel) in phengite together with kyanite and coesite or quartz define invariant points in the coesite and quartz stability field, respectively, depending on which SiO₂ polymorph is stable. Thus, a set of net transfer reactions including these end members will uniquely define equilibrium temperatures and pressures for phengite–kyanite–SiO₂‐bearing eclogites. Application to relevant eclogites from various localities worldwide show good consistency with petrographic evidence. Eclogites containing either coesite or polycrystalline quartz after coesite all plot within the coesite stability field, while typical quartz‐bearing eclogites with no evidence of former coesite fall within the quartz stability field. Diamondiferous coesite–kyanite eclogite and grospydite xenoliths in kimberlites all fall into the diamond stability field. The present method also yields consistent values as compared with the garnet–clinopyroxene Fe–Mg geothermometer for these kinds of rocks, but also indicates some unsystematic scatter of the latter thermometer. The net transfer geothermobarometric method presented in this paper is suggested to be less affected by later thermal re‐equilibration than common cation exchange thermometers.     

Ultrahigh-Pressure Metamorphism in the Western Gneiss Region of the Norwegian Caledonides

The distribution and characterization of UHP rocks within the Western Gneiss Region (WGR) of the Norwegian Caledonides is reviewed. While recent studies have documented a significantly increased number of eclogite localities preserving mineralogical evidence for Scandian-aged UHP metamorphism, much uncertainty remains over the regional extent of any UHP province because of the widespread overprinting by retrograde amphibolite-facies assemblages (especially in the dominant gneisses) during exhumation of the terrain. Based on current observations, the UHP metamorphic province may be limited to a northwest region of only～4000 km², although an enigmatic mixed zone of HP (quartz-stable) and UHP (coesite-stable) eclogites extends a minimum of 5 km farther south and east in the Outer Nordfjord area.

Quantitative P-T evaluation of key mineral reaction equilibria for eclogites sampled across the WGR indicates an overall regional trend of increased T and P to the northwest. This is consistent with Baltic plate rocks in the northwestern part of the WGR having been subducted to greatest depths during the Scandian plate collision. The distribution of garnet peridotites within the WGR and their significance to understanding the nature, location, and timing of crust-mantle interaction within a major continental-plate subduction zone also is briefly considered.     

Geothermobarometry of a stilpnomelane–garnet-bearing metapegmatite: P–T constraints on the Eo-Alpine metamorphic overprint of the Austroalpine nappes north of the Tauern Window

The Ordovician Kellerjochgneiss (Schwaz Augengneiss) is a polymetamorphic orthogneiss-bearing unit and is part of the Austroalpine basement nappes north of the Tauern Window. Within the Kellerjochgneiss a small, strongly deformed metapegmatite dike occurs. The pegmatite crosscuts the gneiss discordantly and contains the mineral assemblage muscovite 1,2+plagioclase+K-feldspar+chlorite+quartz+garnet 1 (Alm_67–76Andr_0.9–2Sps_17–28Prp_0.4–5)+garnet 2 (Grs_36–46Alm_24–32Andr_8–21Sps_15–17Prp_0–1)±stilpnomelane±biotite±clinozoisite. The magmatic protolith assemblage is comprised of relict K-feldspar, quartz and garnet 1. Textural observations indicate that biotite and muscovite cores (muscovite 1) are either part of the magmatic- or an earlier (Variscan?) metamorphic assemblage. Geothermobarometry of the metapegmatite was done on the latest-stage (Eo-Alpine) mineral assemblage garnet 2+muscovite 2+chlorite+stilpnomelane+plagioclase+quartz. Calculations of H₂O-absent intersections in the system [KCNFMAS] with the multi-equilibrium program THERMOCALC v.3.1 yielded P–T estimates of 4.4 to 6.7 kbar and 321°C to 376°C. Calculations of the P–T conditions by using the assemblage muscovite 2+chlorite+stilpnomelane+quartz yielded slightly higher pressures of 6.4 to 7.2 kbar at temperatures of 310–325°C. Correlating these P–T data with geochronological data from the neighbouring lithologies (Kellerjochgneiss, Innsbruck Quartzphyllite, Wildschönau Schists) and with structural investigations from these units indicate that the P–T estimates obtained in this investigation represent the Eo-Alpine metamorphic overprint. Hence, these unusual rocks provide important information on the Eo-Alpine P–T conditions since most samples studied from the investigated Austroalpine basement nappes north of the Tauern Window rarely contain mineral assemblages suitable for geothermobarometry.     

Differential Evolution of High-Pressure and Ultrahigh-Pressure Metapelites from Habutengsu,Chinese Western Tianshan: Phase Equilibria Modelling and 40Ar/39Ar Geochronology

Metapelite is one of the predominant rock types in the high-pressure–ultrahigh-pressure(HP–UHP) metamorphic belt of western Tianshan, NW China; however, the spatial and temporal variations of this belt during metamorphism are poorly understood. In this study, we present comparative petrological studies and 40Ar/39 Ar geochronology of HP and UHP pelitic schist exposed along the Habutengsu valley. The schist mainly comprises quartz, white mica, garnet, albite and bluish amphibole. In the Mn O–Na2O–Ca O–K2O–Fe O–Mg O–Al2O3–Si O2–H2O(Mn NCKFMASH) system, P–T pseudosections were constructed using THERMOCALC 333 for two representative pelitic schists. The results demonstrate that there was a break in the peak metamorphic pressures in the Habutengsu area. The northern schist has experienced UHP metamorphism, consistent with the presence of coesite in the same section, while the southern one formed at lower pressures that stabilized the quartz. This result supports the previous finding of a metamorphic gradient through the HP–UHP metamorphic belt of the Chinese western Tianshan by the authors. Additionally, phengite in the northern schist was modelled as having a Si content of 3.55–3.70(a.p.f.u.) at the peak stage, a value much higher than that of oriented matrix phengite(Si content 3.32–3.38 a.p.f.u.). This indicates that the phengite flakes in the UHP schist were subjected to recrystallization during exhumation, which is consistent with the presence of phengite aggregates surrounding garnet porphyroblast. The 40Ar/39 Ar age spectra of white mica(dominantly phengite) from the two schists exhibit similar plateau ages of ca. 315 Ma, which is interpreted as the timing of a tectonometamorphic event that occurred during the exhumation of the HP–UHP metamorphic belt of the Chinese western Tianshan.     

Metamorphic evolution of medium‐temperature ultra‐high pressure (MT‐UHP) eclogites from the South Dabie orogen,Central China: an insight from phase equilibria modelling

Medium‐temperature ultrahigh pressure (MT‐UHP) eclogites from the south Dabie orogen, as represented by samples from the Jinheqiao, Shuanghe and Bixiling areas, consist of garnet, omphacite, phengite, epidote, hornblendic amphibole, quartz/coesite and rutile with or without kyanite and talc. Garnet is mostly anhedral and unzoned, but a few porphyroblasts are weakly zoned with core–mantle increasing grossular (X_gr) and decreasing pyrope (X_py) contents. Garnet compositions are closely correlated with the bulk compositions. For instance, the X_py and X_gr contents are positively correlated with the bulk MgO and CaO contents. Phengite is occasionally zoned with core–rim deceasing Si content, and phengite grains as inclusions in garnet show higher Si than in the matrix, suggesting differently resetting during post‐peak stages. The maximum Si contents are mostly 3.60–3.63 p.f.u. for the three areas. Pseudosections calculated using THERMOCALC suggest that the MT‐UHP eclogites should have a peak assemblage of garnet + omphacite + lawsonite + phengite + coesite in most rocks of higher MgO content. In this assemblage, the X_py in garnet mostly depends on bulk compositions, whereas the X_gr in garnet and the Si contents in phengite regularly increase, respectively, as temperature and as pressure rise, and thus, can provide robust thermobarometric constraints. Using the X_gr and Si isopleths in pseudosections, the peak P–T conditions were estimated to be 40 kbar/730 °C for the Jinheqiao, 41 kbar/726 °C for the Shuanghe, and 37–52 kbar and 700–830 °C for the Bixiling eclogites. Some eclogites with higher FeO are predicted to have a peak assemblage of garnet + omphacite + coesite ± phengite without lawsonite, where the garnet and phengite compositions highly depend on bulk compositions and generally cannot give available thermobarometric constraints. Decompression of the eclogites with lawsonite in the peak stage is inferred to be accompanied with cooling and involves two stages: an early‐stage decompression is dominated by lawsonite dehydration, resulting in increase in the mode of anhydrous minerals, or further eclogitization, and formation of epidote porphyroblasts and kyanite‐bearing quartz veins in eclogite. As lawsonite dehydration can facilitate evolution of assemblages under fluid‐present conditions, it is difficult to recover real peak P–T conditions for UHP eclogites with lawsonite. This may be a reason why the P–T conditions estimated for eclogites using thermobarometers are mostly lower than those estimated for the coherent ultramafic rocks, and lower than those suggested from the inclusion assemblages in zircon from marble. A late‐stage decompression is dominated by formation of hornblendic amphibole and plagioclase with fluid infiltration. The lawsonite‐absent MT‐UHP eclogites have only experienced a decompression metamorphism corresponding to the later stage and generally lack the epidote overprinting.     

Ultrahigh-pressure corundum-rich garnetite in garnet peridotite,Sulu terrane,China

Corundum-rich garnetite occurs as an isolated lens in a garnet peridotite body in the Donghai area of the Sulu ultrahigh-pressure (UHP) terrane. This rock consists of garnet and corundum, along with minor crack-related zoisite, pargasite, Mg-staurolite, Mg-chloritoid, sapphirine and chlorite. Pyropic garnet (Prp_54–63Grs_26–36Alm_10–12) exhibits a sinusoidal REE pattern, positive Ta, Pb, and negative Nb, Ti anomalies due to metasomatism. Reddish corundum contains 1.1–1.7 wt% Cr₂O₃, and shows three oriented sets of exsolved rutile needles. Both garnet and corundum contain inclusions of apatite, Mg-allanite (MgO>4 wt%), and Ni-Fe sulfides formed as trapped Ni-Fe-S melt. The protolith of the corundum-rich garnetite could have been spinel websterite formed in the upper mantle. Both the websterite and the host garnet peridotite were subjected to subduction-zone UHP metamorphism at 800 °C and >4 GPa. Crack-related hydrous phases were formed by fluid infiltration during exhumation.Editorial responsibility: T.L. Grove     

Phase equilibria and metamorphic evolution of glaucophane‐bearing UHP eclogites from the Western Dabieshan Terrane,Central China

Glaucophane‐bearing ultrahigh pressure (UHP) eclogites from the western Dabieshan terrane consist of garnet, omphacite, glaucophane, kyanite, epidote, phengite, quartz/coesite and rutile with or without talc and paragonite. Some garnet porphyroblasts exhibit a core–mantle zoning profile with slight increase in pyrope content and minor or slight decrease in grossular and a mantle–rim zoning profile characterized by a pronounced increase in pyrope and rapid decrease in grossular. Omphacite is usually zoned with a core–rim decrease in j(o) [=Na/(Ca + Na)]. Glaucophane occurs as porphyroblasts in some samples and contains inclusions of garnet, omphacite and epidote. Pseudosections calculated in the NCKMnFMASHO system for five representative samples, combined with petrographic observations suggest that the UHP eclogites record four stages of metamorphism. (i) The prograde stage, on the basis of modelling of garnet zoning and inclusions in garnet, involves P–T vectors dominated by heating with a slight increase in pressure, suggesting an early slow subduction process, and P–T vectors dominated by a pronounced increase in pressure and slight heating, pointing to a late fast subduction process. The prograde metamorphism is predominated by dehydration of glaucophane and, to a lesser extent, chlorite, epidote and paragonite, releasing ～27 wt% water that was bound in the hydrous minerals. (ii) The peak stage is represented by garnet rim compositions with maximum pyrope and minimum grossular contents, and P–T conditions of 28.2–31.8 kbar and 605–613 °C, with the modelled peak‐stage mineral assemblage mostly involving garnet + omphacite + lawsonite + talc + phengite + coesite ± glaucophane ± kyanite. (iii) The early decompression stage is characterized by dehydration of lawsonite, releasing ～70–90 wt% water bound in the peak mineral assemblages, which results in the growth of glaucophane, j(o) decrease in omphacite and formation of epidote. And, (iv) The late retrograde stage is characterized by the mineral assemblage of hornblendic amphibole + epidote + albite/oligoclase + quartz developed in the margins or strongly foliated domains of eclogite blocks due to fluid infiltration at P–T conditions of 5–10 kbar and 500–580 °C. The proposed metamorphic stages for the UHP eclogites are consistent with the petrological observations, but considerably different from those presented in the previous studies.     

Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.